NetBSD/usr.bin/ftp/util.c

1399 lines
31 KiB
C
Raw Normal View History

2005-05-07 20:19:13 +04:00
/* $NetBSD: util.c,v 1.120 2005/05/07 16:19:13 lukem Exp $ */
/*-
* Copyright (c) 1997-2005 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Luke Mewburn.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1985, 1989, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifndef lint
2005-05-07 20:19:13 +04:00
__RCSID("$NetBSD: util.c,v 1.120 2005/05/07 16:19:13 lukem Exp $");
#endif /* not lint */
/*
* FTP User Program -- Misc support routines
*/
#include <sys/param.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/time.h>
#include <netinet/in.h>
#include <arpa/ftp.h>
#include <ctype.h>
#include <err.h>
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
#include <errno.h>
#include <fcntl.h>
#include <glob.h>
#include <signal.h>
#include <limits.h>
#include <netdb.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <termios.h>
#include <time.h>
#include <tzfile.h>
#include <unistd.h>
#include "ftp_var.h"
/*
* Connect to peer server and auto-login, if possible.
*/
void
2000-05-01 14:35:16 +04:00
setpeer(int argc, char *argv[])
{
char *host;
char *port;
if (argc == 0)
goto usage;
if (connected) {
fprintf(ttyout, "Already connected to %s, use close first.\n",
hostname);
code = -1;
return;
}
if (argc < 2)
(void)another(&argc, &argv, "to");
if (argc < 2 || argc > 3) {
usage:
fprintf(ttyout, "usage: %s host-name [port]\n", argv[0]);
code = -1;
return;
}
if (gatemode)
port = gateport;
else
port = ftpport;
if (argc > 2)
port = argv[2];
if (gatemode) {
if (gateserver == NULL || *gateserver == '\0')
errx(1, "gateserver not defined (shouldn't happen)");
host = hookup(gateserver, port);
} else
host = hookup(argv[1], port);
if (host) {
if (gatemode && verbose) {
fprintf(ttyout,
"Connecting via pass-through server %s\n",
gateserver);
}
connected = 1;
/*
* Set up defaults for FTP.
*/
(void)strlcpy(typename, "ascii", sizeof(typename));
type = TYPE_A;
curtype = TYPE_A;
(void)strlcpy(formname, "non-print", sizeof(formname));
form = FORM_N;
(void)strlcpy(modename, "stream", sizeof(modename));
mode = MODE_S;
(void)strlcpy(structname, "file", sizeof(structname));
stru = STRU_F;
(void)strlcpy(bytename, "8", sizeof(bytename));
bytesize = 8;
if (autologin)
(void)ftp_login(argv[1], NULL, NULL);
}
}
static void
parse_feat(const char *line)
{
/*
* work-around broken ProFTPd servers that can't
* even obey RFC 2389.
*/
while (*line && isspace((int)*line))
line++;
if (strcasecmp(line, "MDTM") == 0)
features[FEAT_MDTM] = 1;
else if (strncasecmp(line, "MLST", sizeof("MLST") - 1) == 0) {
features[FEAT_MLST] = 1;
} else if (strcasecmp(line, "REST STREAM") == 0)
features[FEAT_REST_STREAM] = 1;
else if (strcasecmp(line, "SIZE") == 0)
features[FEAT_SIZE] = 1;
else if (strcasecmp(line, "TVFS") == 0)
features[FEAT_TVFS] = 1;
}
/*
* Determine the remote system type (SYST) and features (FEAT).
* Call after a successful login (i.e, connected = -1)
*/
void
getremoteinfo(void)
{
int overbose, i;
overbose = verbose;
if (debug == 0)
verbose = -1;
/* determine remote system type */
if (command("SYST") == COMPLETE) {
if (overbose) {
char *cp, c;
c = 0;
cp = strchr(reply_string + 4, ' ');
if (cp == NULL)
cp = strchr(reply_string + 4, '\r');
if (cp) {
if (cp[-1] == '.')
cp--;
c = *cp;
*cp = '\0';
}
fprintf(ttyout, "Remote system type is %s.\n",
reply_string + 4);
if (cp)
*cp = c;
}
if (!strncmp(reply_string, "215 UNIX Type: L8", 17)) {
if (proxy)
unix_proxy = 1;
else
unix_server = 1;
/*
* Set type to 0 (not specified by user),
* meaning binary by default, but don't bother
* telling server. We can use binary
* for text files unless changed by the user.
*/
type = 0;
(void)strlcpy(typename, "binary", sizeof(typename));
if (overbose)
fprintf(ttyout,
"Using %s mode to transfer files.\n",
typename);
} else {
if (proxy)
unix_proxy = 0;
else
unix_server = 0;
if (overbose &&
!strncmp(reply_string, "215 TOPS20", 10))
fputs(
"Remember to set tenex mode when transferring binary files from this machine.\n",
ttyout);
}
}
/* determine features (if any) */
for (i = 0; i < FEAT_max; i++)
features[i] = -1;
reply_callback = parse_feat;
if (command("FEAT") == COMPLETE) {
for (i = 0; i < FEAT_max; i++) {
if (features[i] == -1)
features[i] = 0;
}
features[FEAT_FEAT] = 1;
} else
features[FEAT_FEAT] = 0;
if (debug) {
#define DEBUG_FEAT(x) fprintf(ttyout, "features[" #x "] = %d\n", features[(x)])
DEBUG_FEAT(FEAT_FEAT);
DEBUG_FEAT(FEAT_MDTM);
DEBUG_FEAT(FEAT_MLST);
DEBUG_FEAT(FEAT_REST_STREAM);
DEBUG_FEAT(FEAT_SIZE);
DEBUG_FEAT(FEAT_TVFS);
#undef DEBUG_FEAT
}
reply_callback = NULL;
verbose = overbose;
}
/*
* Reset the various variables that indicate connection state back to
* disconnected settings.
* The caller is responsible for issuing any commands to the remote server
* to perform a clean shutdown before this is invoked.
*/
void
cleanuppeer(void)
{
if (cout)
(void)fclose(cout);
cout = NULL;
connected = 0;
unix_server = 0;
unix_proxy = 0;
/*
* determine if anonftp was specifically set with -a
* (1), or implicitly set by auto_fetch() (2). in the
* latter case, disable after the current xfer
*/
if (anonftp == 2)
anonftp = 0;
data = -1;
epsv4bad = 0;
if (username)
free(username);
username = NULL;
if (!proxy)
macnum = 0;
}
/*
* Top-level signal handler for interrupted commands.
*/
void
intr(int signo)
{
sigint_raised = 1;
alarmtimer(0);
if (fromatty)
write(fileno(ttyout), "\n", 1);
siglongjmp(toplevel, 1);
}
/*
* Signal handler for lost connections; cleanup various elements of
* the connection state, and call cleanuppeer() to finish it off.
*/
void
2000-05-01 14:35:16 +04:00
lostpeer(int dummy)
{
int oerrno = errno;
alarmtimer(0);
if (connected) {
if (cout != NULL) {
(void)shutdown(fileno(cout), 1+1);
(void)fclose(cout);
cout = NULL;
}
if (data >= 0) {
(void)shutdown(data, 1+1);
(void)close(data);
data = -1;
}
connected = 0;
}
pswitch(1);
if (connected) {
if (cout != NULL) {
(void)shutdown(fileno(cout), 1+1);
(void)fclose(cout);
cout = NULL;
}
connected = 0;
}
proxflag = 0;
pswitch(0);
cleanuppeer();
errno = oerrno;
}
/*
* Login to remote host, using given username & password if supplied.
* Return non-zero if successful.
*/
int
2000-05-01 14:35:16 +04:00
ftp_login(const char *host, const char *user, const char *pass)
{
char tmp[80];
1998-07-27 01:47:47 +04:00
const char *acct;
int n, aflag, rval, freeuser, freepass, freeacct;
acct = NULL;
aflag = rval = freeuser = freepass = freeacct = 0;
if (debug)
fprintf(ttyout, "ftp_login: user `%s' pass `%s' host `%s'\n",
user ? user : "<null>", pass ? pass : "<null>",
host ? host : "<null>");
/*
* Set up arguments for an anonymous FTP session, if necessary.
*/
if (anonftp) {
user = "anonymous"; /* as per RFC 1635 */
pass = getoptionvalue("anonpass");
}
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
if (user == NULL)
freeuser = 1;
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
if (pass == NULL)
freepass = 1;
freeacct = 1;
if (ruserpass(host, &user, &pass, &acct) < 0) {
code = -1;
goto cleanup_ftp_login;
}
while (user == NULL) {
if (localname)
fprintf(ttyout, "Name (%s:%s): ", host, localname);
else
fprintf(ttyout, "Name (%s): ", host);
*tmp = '\0';
if (fgets(tmp, sizeof(tmp) - 1, stdin) == NULL) {
fprintf(ttyout, "\nEOF received; login aborted.\n");
clearerr(stdin);
code = -1;
goto cleanup_ftp_login;
}
tmp[strlen(tmp) - 1] = '\0';
freeuser = 0;
if (*tmp == '\0')
user = localname;
else
user = tmp;
}
if (gatemode) {
char *nuser;
int len;
len = strlen(user) + 1 + strlen(host) + 1;
nuser = xmalloc(len);
(void)strlcpy(nuser, user, len);
(void)strlcat(nuser, "@", len);
(void)strlcat(nuser, host, len);
freeuser = 1;
user = nuser;
}
n = command("USER %s", user);
if (n == CONTINUE) {
if (pass == NULL) {
freepass = 0;
pass = getpass("Password:");
}
n = command("PASS %s", pass);
}
if (n == CONTINUE) {
aflag++;
if (acct == NULL) {
freeacct = 0;
acct = getpass("Account:");
}
if (acct[0] == '\0') {
warnx("Login failed.");
goto cleanup_ftp_login;
}
n = command("ACCT %s", acct);
}
if ((n != COMPLETE) ||
(!aflag && acct != NULL && command("ACCT %s", acct) != COMPLETE)) {
warnx("Login failed.");
goto cleanup_ftp_login;
}
rval = 1;
username = xstrdup(user);
if (proxy)
goto cleanup_ftp_login;
connected = -1;
getremoteinfo();
for (n = 0; n < macnum; ++n) {
if (!strcmp("init", macros[n].mac_name)) {
(void)strlcpy(line, "$init", sizeof(line));
makeargv();
domacro(margc, margv);
break;
}
}
updatelocalcwd();
updateremotecwd();
cleanup_ftp_login:
if (user != NULL && freeuser)
free((char *)user);
if (pass != NULL && freepass)
free((char *)pass);
if (acct != NULL && freeacct)
free((char *)acct);
return (rval);
}
/*
* `another' gets another argument, and stores the new argc and argv.
* It reverts to the top level (via intr()) on EOF/error.
*
* Returns false if no new arguments have been added.
*/
int
2000-05-01 14:35:16 +04:00
another(int *pargc, char ***pargv, const char *prompt)
{
int len = strlen(line), ret;
if (len >= sizeof(line) - 3) {
fputs("sorry, arguments too long.\n", ttyout);
intr(0);
}
fprintf(ttyout, "(%s) ", prompt);
line[len++] = ' ';
if (fgets(&line[len], sizeof(line) - len, stdin) == NULL) {
clearerr(stdin);
intr(0);
}
len += strlen(&line[len]);
if (len > 0 && line[len - 1] == '\n')
line[len - 1] = '\0';
makeargv();
ret = margc > *pargc;
*pargc = margc;
*pargv = margv;
return (ret);
}
/*
* glob files given in argv[] from the remote server.
* if errbuf isn't NULL, store error messages there instead
* of writing to the screen.
*/
char *
2000-05-01 14:35:16 +04:00
remglob(char *argv[], int doswitch, char **errbuf)
{
char temp[MAXPATHLEN];
static char buf[MAXPATHLEN];
static FILE *ftemp = NULL;
static char **args;
int oldverbose, oldhash, oldprogress, fd, len;
char *cp, *mode;
if (!mflag || !connected) {
if (!doglob)
args = NULL;
else {
if (ftemp) {
(void)fclose(ftemp);
ftemp = NULL;
}
}
return (NULL);
}
if (!doglob) {
if (args == NULL)
args = argv;
if ((cp = *++args) == NULL)
args = NULL;
return (cp);
}
if (ftemp == NULL) {
len = strlcpy(temp, tmpdir, sizeof(temp));
if (temp[len - 1] != '/')
(void)strlcat(temp, "/", sizeof(temp));
(void)strlcat(temp, TMPFILE, sizeof(temp));
if ((fd = mkstemp(temp)) < 0) {
warn("unable to create temporary file %s", temp);
return (NULL);
}
close(fd);
oldverbose = verbose;
verbose = (errbuf != NULL) ? -1 : 0;
oldhash = hash;
oldprogress = progress;
hash = 0;
progress = 0;
if (doswitch)
pswitch(!proxy);
for (mode = "w"; *++argv != NULL; mode = "a")
recvrequest("NLST", temp, *argv, mode, 0, 0);
if ((code / 100) != COMPLETE) {
if (errbuf != NULL)
*errbuf = reply_string;
}
if (doswitch)
pswitch(!proxy);
verbose = oldverbose;
hash = oldhash;
progress = oldprogress;
ftemp = fopen(temp, "r");
(void)unlink(temp);
if (ftemp == NULL) {
if (errbuf == NULL)
fputs(
"can't find list of remote files, oops.\n",
ttyout);
else
*errbuf =
"can't find list of remote files, oops.";
return (NULL);
}
}
if (fgets(buf, sizeof(buf), ftemp) == NULL) {
(void)fclose(ftemp);
ftemp = NULL;
return (NULL);
}
if ((cp = strchr(buf, '\n')) != NULL)
*cp = '\0';
return (buf);
}
/*
* Glob a local file name specification with the expectation of a single
* return value. Can't control multiple values being expanded from the
* expression, we return only the first.
* Returns NULL on error, or a pointer to a buffer containing the filename
* that's the caller's responsiblity to free(3) when finished with.
*/
char *
2000-05-01 14:35:16 +04:00
globulize(const char *pattern)
{
glob_t gl;
int flags;
char *p;
if (!doglob)
return (xstrdup(pattern));
flags = GLOB_BRACE|GLOB_NOCHECK|GLOB_TILDE;
memset(&gl, 0, sizeof(gl));
if (glob(pattern, flags, NULL, &gl) || gl.gl_pathc == 0) {
warnx("%s: not found", pattern);
globfree(&gl);
return (NULL);
}
p = xstrdup(gl.gl_pathv[0]);
globfree(&gl);
return (p);
}
/*
* determine size of remote file
*/
off_t
2000-05-01 14:35:16 +04:00
remotesize(const char *file, int noisy)
{
int overbose, r;
off_t size;
overbose = verbose;
size = -1;
if (debug == 0)
verbose = -1;
if (! features[FEAT_SIZE]) {
if (noisy)
fprintf(ttyout,
"SIZE is not supported by remote server.\n");
goto cleanup_remotesize;
}
r = command("SIZE %s", file);
if (r == COMPLETE) {
char *cp, *ep;
cp = strchr(reply_string, ' ');
if (cp != NULL) {
cp++;
size = STRTOLL(cp, &ep, 10);
if (*ep != '\0' && !isspace((unsigned char)*ep))
size = -1;
}
} else {
if (r == ERROR && code == 500 && features[FEAT_SIZE] == -1)
features[FEAT_SIZE] = 0;
if (noisy && debug == 0) {
fputs(reply_string, ttyout);
putc('\n', ttyout);
}
}
cleanup_remotesize:
verbose = overbose;
return (size);
}
/*
* determine last modification time (in GMT) of remote file
*/
time_t
2000-05-01 14:35:16 +04:00
remotemodtime(const char *file, int noisy)
{
int overbose, ocode, r;
time_t rtime;
overbose = verbose;
ocode = code;
rtime = -1;
if (debug == 0)
verbose = -1;
if (! features[FEAT_MDTM]) {
if (noisy)
fprintf(ttyout,
"MDTM is not supported by remote server.\n");
goto cleanup_parse_time;
}
r = command("MDTM %s", file);
if (r == COMPLETE) {
struct tm timebuf;
char *timestr, *frac;
int yy, mo, day, hour, min, sec;
/*
* time-val = 14DIGIT [ "." 1*DIGIT ]
* YYYYMMDDHHMMSS[.sss]
* mdtm-response = "213" SP time-val CRLF / error-response
*/
timestr = reply_string + 4;
/*
* parse fraction.
* XXX: ignored for now
*/
frac = strchr(timestr, '\r');
if (frac != NULL)
*frac = '\0';
frac = strchr(timestr, '.');
if (frac != NULL)
*frac++ = '\0';
if (strlen(timestr) == 15 && strncmp(timestr, "191", 3) == 0) {
/*
2000-01-25 09:45:18 +03:00
* XXX: Workaround for lame ftpd's that return
* `19100' instead of `2000'
*/
fprintf(ttyout,
"Y2K warning! Incorrect time-val `%s' received from server.\n",
timestr);
timestr++;
timestr[0] = '2';
timestr[1] = '0';
fprintf(ttyout, "Converted to `%s'\n", timestr);
}
if (strlen(timestr) != 14 ||
sscanf(timestr, "%04d%02d%02d%02d%02d%02d",
&yy, &mo, &day, &hour, &min, &sec) != 6) {
bad_parse_time:
fprintf(ttyout, "Can't parse time `%s'.\n", timestr);
goto cleanup_parse_time;
}
memset(&timebuf, 0, sizeof(timebuf));
timebuf.tm_sec = sec;
timebuf.tm_min = min;
timebuf.tm_hour = hour;
timebuf.tm_mday = day;
timebuf.tm_mon = mo - 1;
timebuf.tm_year = yy - TM_YEAR_BASE;
timebuf.tm_isdst = -1;
rtime = timegm(&timebuf);
if (rtime == -1) {
if (noisy || debug != 0)
goto bad_parse_time;
else
goto cleanup_parse_time;
} else if (debug)
fprintf(ttyout, "parsed date as: %s", ctime(&rtime));
} else {
if (r == ERROR && code == 500 && features[FEAT_MDTM] == -1)
features[FEAT_MDTM] = 0;
if (noisy && debug == 0) {
fputs(reply_string, ttyout);
putc('\n', ttyout);
}
}
cleanup_parse_time:
verbose = overbose;
if (rtime == -1)
code = ocode;
return (rtime);
}
/*
* Update global `localcwd', which contains the state of the local cwd
*/
void
updatelocalcwd(void)
{
if (getcwd(localcwd, sizeof(localcwd)) == NULL)
localcwd[0] = '\0';
if (debug)
fprintf(ttyout, "got localcwd as `%s'\n", localcwd);
}
/*
* Update global `remotecwd', which contains the state of the remote cwd
*/
void
updateremotecwd(void)
{
int overbose, ocode, i;
char *cp;
overbose = verbose;
ocode = code;
if (debug == 0)
verbose = -1;
if (command("PWD") != COMPLETE)
goto badremotecwd;
cp = strchr(reply_string, ' ');
if (cp == NULL || cp[0] == '\0' || cp[1] != '"')
goto badremotecwd;
cp += 2;
for (i = 0; *cp && i < sizeof(remotecwd) - 1; i++, cp++) {
if (cp[0] == '"') {
if (cp[1] == '"')
cp++;
else
break;
}
remotecwd[i] = *cp;
}
remotecwd[i] = '\0';
if (debug)
fprintf(ttyout, "got remotecwd as `%s'\n", remotecwd);
goto cleanupremotecwd;
badremotecwd:
remotecwd[0]='\0';
cleanupremotecwd:
verbose = overbose;
code = ocode;
}
/*
* Ensure file is in or under dir.
* Returns 1 if so, 0 if not (or an error occurred).
*/
int
fileindir(const char *file, const char *dir)
{
char realfile[PATH_MAX+1];
size_t dirlen;
if (realpath(file, realfile) == NULL) {
warn("Unable to determine real path of `%s'", file);
return 0;
}
if (realfile[0] != '/') /* relative result */
return 1;
dirlen = strlen(dir);
#if 0
printf("file %s realfile %s dir %s [%d]\n", file, realfile, dir, dirlen);
#endif
if (strncmp(realfile, dir, dirlen) == 0 && realfile[dirlen] == '/')
return 1;
return 0;
}
/*
* List words in stringlist, vertically arranged
*/
void
2000-05-01 14:35:16 +04:00
list_vertical(StringList *sl)
{
int i, j, w;
int columns, width, lines;
char *p;
width = 0;
for (i = 0 ; i < sl->sl_cur ; i++) {
w = strlen(sl->sl_str[i]);
if (w > width)
width = w;
}
width = (width + 8) &~ 7;
columns = ttywidth / width;
if (columns == 0)
columns = 1;
lines = (sl->sl_cur + columns - 1) / columns;
for (i = 0; i < lines; i++) {
for (j = 0; j < columns; j++) {
p = sl->sl_str[j * lines + i];
if (p)
fputs(p, ttyout);
if (j * lines + i + lines >= sl->sl_cur) {
putc('\n', ttyout);
break;
}
w = strlen(p);
while (w < width) {
w = (w + 8) &~ 7;
(void)putc('\t', ttyout);
}
}
}
}
[Yet Another Huge Ftp Commit - hopefully the last for a while, barring any more little things people want added ...] New features: * progressmeter is now asynchronous, so "stalled" transfers can be detected. "- stalled -" is displayed instead of the ETA in this case. When the xfer resumes, the time that the xfer was stalled for is factored out of the ETA. It is debatable whether this is better than not factoring it out, but I like it this way (I.e, if it stalls for 8 seconds and the ETA was 30 seconds, when it resumes the ETA will still be 30 seconds). * verbosity can be disabled on the command line (-V), so that in auto-fetch mode the only lines displayed will be a description of the file, and the progress bar (if possible) * if the screen is resized (and detected via the SIGWINCH signal), the progress bar will rescale automatically. Bugs fixed: * progress bar will not use the last character on the line, as this can cause problems on some terminals * screen dimensions (via ioctl(TIOCWINSZ)) should use stdout not stdin * progressmeter() used some vars before initialising them * ^D will quit now. [fixes bin/3162] * use hstrerror() to generate error message for host name lookup failure. * use getcwd instead of getwd (it should have been OK, but why tempt fate?) * auto-fetch transfers will always return a positive exit value upon failure or interruption, relative to the file's position in argv[]. * remote completion of / will work, without putting a leading "///". This is actually a bug in ftpd(1), where "NLST /" prefixes all names with "//", but fixing every ftpd(1) is not an option...
1997-02-01 13:44:54 +03:00
/*
* Update the global ttywidth value, using TIOCGWINSZ.
*/
void
2000-05-01 14:35:16 +04:00
setttywidth(int a)
[Yet Another Huge Ftp Commit - hopefully the last for a while, barring any more little things people want added ...] New features: * progressmeter is now asynchronous, so "stalled" transfers can be detected. "- stalled -" is displayed instead of the ETA in this case. When the xfer resumes, the time that the xfer was stalled for is factored out of the ETA. It is debatable whether this is better than not factoring it out, but I like it this way (I.e, if it stalls for 8 seconds and the ETA was 30 seconds, when it resumes the ETA will still be 30 seconds). * verbosity can be disabled on the command line (-V), so that in auto-fetch mode the only lines displayed will be a description of the file, and the progress bar (if possible) * if the screen is resized (and detected via the SIGWINCH signal), the progress bar will rescale automatically. Bugs fixed: * progress bar will not use the last character on the line, as this can cause problems on some terminals * screen dimensions (via ioctl(TIOCWINSZ)) should use stdout not stdin * progressmeter() used some vars before initialising them * ^D will quit now. [fixes bin/3162] * use hstrerror() to generate error message for host name lookup failure. * use getcwd instead of getwd (it should have been OK, but why tempt fate?) * auto-fetch transfers will always return a positive exit value upon failure or interruption, relative to the file's position in argv[]. * remote completion of / will work, without putting a leading "///". This is actually a bug in ftpd(1), where "NLST /" prefixes all names with "//", but fixing every ftpd(1) is not an option...
1997-02-01 13:44:54 +03:00
{
struct winsize winsize;
int oerrno = errno;
[Yet Another Huge Ftp Commit - hopefully the last for a while, barring any more little things people want added ...] New features: * progressmeter is now asynchronous, so "stalled" transfers can be detected. "- stalled -" is displayed instead of the ETA in this case. When the xfer resumes, the time that the xfer was stalled for is factored out of the ETA. It is debatable whether this is better than not factoring it out, but I like it this way (I.e, if it stalls for 8 seconds and the ETA was 30 seconds, when it resumes the ETA will still be 30 seconds). * verbosity can be disabled on the command line (-V), so that in auto-fetch mode the only lines displayed will be a description of the file, and the progress bar (if possible) * if the screen is resized (and detected via the SIGWINCH signal), the progress bar will rescale automatically. Bugs fixed: * progress bar will not use the last character on the line, as this can cause problems on some terminals * screen dimensions (via ioctl(TIOCWINSZ)) should use stdout not stdin * progressmeter() used some vars before initialising them * ^D will quit now. [fixes bin/3162] * use hstrerror() to generate error message for host name lookup failure. * use getcwd instead of getwd (it should have been OK, but why tempt fate?) * auto-fetch transfers will always return a positive exit value upon failure or interruption, relative to the file's position in argv[]. * remote completion of / will work, without putting a leading "///". This is actually a bug in ftpd(1), where "NLST /" prefixes all names with "//", but fixing every ftpd(1) is not an option...
1997-02-01 13:44:54 +03:00
if (ioctl(fileno(ttyout), TIOCGWINSZ, &winsize) != -1 &&
winsize.ws_col != 0)
[Yet Another Huge Ftp Commit - hopefully the last for a while, barring any more little things people want added ...] New features: * progressmeter is now asynchronous, so "stalled" transfers can be detected. "- stalled -" is displayed instead of the ETA in this case. When the xfer resumes, the time that the xfer was stalled for is factored out of the ETA. It is debatable whether this is better than not factoring it out, but I like it this way (I.e, if it stalls for 8 seconds and the ETA was 30 seconds, when it resumes the ETA will still be 30 seconds). * verbosity can be disabled on the command line (-V), so that in auto-fetch mode the only lines displayed will be a description of the file, and the progress bar (if possible) * if the screen is resized (and detected via the SIGWINCH signal), the progress bar will rescale automatically. Bugs fixed: * progress bar will not use the last character on the line, as this can cause problems on some terminals * screen dimensions (via ioctl(TIOCWINSZ)) should use stdout not stdin * progressmeter() used some vars before initialising them * ^D will quit now. [fixes bin/3162] * use hstrerror() to generate error message for host name lookup failure. * use getcwd instead of getwd (it should have been OK, but why tempt fate?) * auto-fetch transfers will always return a positive exit value upon failure or interruption, relative to the file's position in argv[]. * remote completion of / will work, without putting a leading "///". This is actually a bug in ftpd(1), where "NLST /" prefixes all names with "//", but fixing every ftpd(1) is not an option...
1997-02-01 13:44:54 +03:00
ttywidth = winsize.ws_col;
else
ttywidth = 80;
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
errno = oerrno;
[Yet Another Huge Ftp Commit - hopefully the last for a while, barring any more little things people want added ...] New features: * progressmeter is now asynchronous, so "stalled" transfers can be detected. "- stalled -" is displayed instead of the ETA in this case. When the xfer resumes, the time that the xfer was stalled for is factored out of the ETA. It is debatable whether this is better than not factoring it out, but I like it this way (I.e, if it stalls for 8 seconds and the ETA was 30 seconds, when it resumes the ETA will still be 30 seconds). * verbosity can be disabled on the command line (-V), so that in auto-fetch mode the only lines displayed will be a description of the file, and the progress bar (if possible) * if the screen is resized (and detected via the SIGWINCH signal), the progress bar will rescale automatically. Bugs fixed: * progress bar will not use the last character on the line, as this can cause problems on some terminals * screen dimensions (via ioctl(TIOCWINSZ)) should use stdout not stdin * progressmeter() used some vars before initialising them * ^D will quit now. [fixes bin/3162] * use hstrerror() to generate error message for host name lookup failure. * use getcwd instead of getwd (it should have been OK, but why tempt fate?) * auto-fetch transfers will always return a positive exit value upon failure or interruption, relative to the file's position in argv[]. * remote completion of / will work, without putting a leading "///". This is actually a bug in ftpd(1), where "NLST /" prefixes all names with "//", but fixing every ftpd(1) is not an option...
1997-02-01 13:44:54 +03:00
}
/*
* Change the rate limit up (SIGUSR1) or down (SIGUSR2)
*/
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
void
2000-05-01 14:35:16 +04:00
crankrate(int sig)
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
{
switch (sig) {
case SIGUSR1:
if (rate_get)
rate_get += rate_get_incr;
if (rate_put)
rate_put += rate_put_incr;
break;
case SIGUSR2:
if (rate_get && rate_get > rate_get_incr)
rate_get -= rate_get_incr;
if (rate_put && rate_put > rate_put_incr)
rate_put -= rate_put_incr;
break;
default:
err(1, "crankrate invoked with unknown signal: %d", sig);
}
}
/*
* Setup or cleanup EditLine structures
*/
#ifndef NO_EDITCOMPLETE
void
2000-05-01 14:35:16 +04:00
controlediting(void)
{
if (editing && el == NULL && hist == NULL) {
HistEvent ev;
int editmode;
2001-02-20 02:03:42 +03:00
el = el_init(getprogname(), stdin, ttyout, stderr);
/* init editline */
hist = history_init(); /* init the builtin history */
history(hist, &ev, H_SETSIZE, 100);/* remember 100 events */
el_set(el, EL_HIST, history, hist); /* use history */
el_set(el, EL_EDITOR, "emacs"); /* default editor is emacs */
el_set(el, EL_PROMPT, prompt); /* set the prompt functions */
el_set(el, EL_RPROMPT, rprompt);
/* add local file completion, bind to TAB */
el_set(el, EL_ADDFN, "ftp-complete",
"Context sensitive argument completion",
complete);
el_set(el, EL_BIND, "^I", "ftp-complete", NULL);
el_source(el, NULL); /* read ~/.editrc */
if ((el_get(el, EL_EDITMODE, &editmode) != -1) && editmode == 0)
editing = 0; /* the user doesn't want editing,
* so disable, and let statement
* below cleanup */
else
el_set(el, EL_SIGNAL, 1);
}
if (!editing) {
if (hist) {
history_end(hist);
hist = NULL;
}
if (el) {
el_end(el);
el = NULL;
}
}
}
#endif /* !NO_EDITCOMPLETE */
/*
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
* Convert the string `arg' to an int, which may have an optional SI suffix
* (`b', `k', `m', `g'). Returns the number for success, -1 otherwise.
*/
int
2000-05-01 14:35:16 +04:00
strsuftoi(const char *arg)
{
char *cp;
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
long val;
1998-11-06 19:52:42 +03:00
if (!isdigit((unsigned char)arg[0]))
return (-1);
val = strtol(arg, &cp, 10);
if (cp != NULL) {
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
if (cp[0] != '\0' && cp[1] != '\0')
return (-1);
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
switch (tolower((unsigned char)cp[0])) {
case '\0':
case 'b':
break;
case 'k':
val <<= 10;
break;
case 'm':
val <<= 20;
break;
case 'g':
val <<= 30;
break;
default:
return (-1);
}
}
[fear this; more ftp hacking from lukem :-] features: --------- * transfer rate throttling with the new `rate' command. syntax: rate direction [max [incr]] where direction is `all', `get' or `put'. if max is not supplied, the current settings are displayed. if max is supplied, then transfers in the given direction will be throttled to this value. if incr is supplied, the increment for the `on-the-fly' scaling will be set to that, otherwise `1024' is used. currently implemented for binary get, binary put, and url fetches. not yet supported for ascii get or put, or local file copies. * on-the-fly scaling of the throttle based on signals: - SIGUSR1 raises the throttle rate by the increment for that direction - SIGUSR2 lowers the throttle rate by the increment for that direction * -T dir,max[,incr] option to set rate from the command line * `k', `m', `g' suffix support for bytecounts in the `hash', `rate', `rcvbuf' and `sndbuf' commands) bug fixes and code mods: ------------------------ * fix up ftp_login() so that ruserpass() is always called, even for command-line url fetches. * implement strsuftoi(), which parses a given number into a int with suffix support. replaces getsockbufsize() * implement parserate(), which does the argv parsing for -T and rate * save and restore errno in signal handlers (may not be necessary, but it doesn't hurt) notes: ------ the rate command has had reasonable testing, but I'd like feedback if it doesn't do the right thing, especially from people on slower (i.e, modem) links. I haven't tested the rate throttle against a http server which does `transfer-encoding: chunked' because I couldn't find a server to test against.
1999-06-29 14:43:16 +04:00
if (val < 0 || val > INT_MAX)
return (-1);
return (val);
}
/*
* Set up socket buffer sizes before a connection is made.
*/
void
2000-05-01 14:35:16 +04:00
setupsockbufsize(int sock)
{
if (setsockopt(sock, SOL_SOCKET, SO_SNDBUF, (void *) &sndbuf_size,
sizeof(rcvbuf_size)) < 0)
warn("unable to set sndbuf size %d", sndbuf_size);
if (setsockopt(sock, SOL_SOCKET, SO_RCVBUF, (void *) &rcvbuf_size,
sizeof(rcvbuf_size)) < 0)
warn("unable to set rcvbuf size %d", rcvbuf_size);
}
/*
* Copy characters from src into dst, \ quoting characters that require it
*/
void
2000-05-01 14:35:16 +04:00
ftpvis(char *dst, size_t dstlen, const char *src, size_t srclen)
{
int di, si;
for (di = si = 0;
src[si] != '\0' && di < dstlen && si < srclen;
di++, si++) {
switch (src[si]) {
case '\\':
case ' ':
case '\t':
case '\r':
1999-02-07 16:15:12 +03:00
case '\n':
case '"':
dst[di++] = '\\';
if (di >= dstlen)
break;
/* FALLTHROUGH */
default:
dst[di] = src[si];
}
}
dst[di] = '\0';
}
/*
* Copy src into buf (which is len bytes long), expanding % sequences.
*/
void
2000-05-01 14:35:16 +04:00
formatbuf(char *buf, size_t len, const char *src)
{
const char *p;
char *p2, *q;
int i, op, updirs, pdirs;
#define ADDBUF(x) do { \
if (i >= len - 1) \
goto endbuf; \
buf[i++] = (x); \
} while (0)
p = src;
for (i = 0; *p; p++) {
if (*p != '%') {
ADDBUF(*p);
continue;
}
p++;
switch (op = *p) {
case '/':
case '.':
case 'c':
p2 = connected ? remotecwd : "";
updirs = pdirs = 0;
/* option to determine fixed # of dirs from path */
if (op == '.' || op == 'c') {
int skip;
q = p2;
while (*p2) /* calc # of /'s */
if (*p2++ == '/')
updirs++;
if (p[1] == '0') { /* print <x> or ... */
pdirs = 1;
p++;
}
if (p[1] >= '1' && p[1] <= '9') {
/* calc # to skip */
skip = p[1] - '0';
p++;
} else
skip = 1;
updirs -= skip;
while (skip-- > 0) {
while ((p2 > q) && (*p2 != '/'))
p2--; /* back up */
if (skip && p2 > q)
p2--;
}
if (*p2 == '/' && p2 != q)
p2++;
}
if (updirs > 0 && pdirs) {
if (i >= len - 5)
break;
if (op == '.') {
ADDBUF('.');
ADDBUF('.');
ADDBUF('.');
} else {
ADDBUF('/');
ADDBUF('<');
if (updirs > 9) {
ADDBUF('9');
ADDBUF('+');
} else
ADDBUF('0' + updirs);
ADDBUF('>');
}
}
for (; *p2; p2++)
ADDBUF(*p2);
break;
case 'M':
case 'm':
for (p2 = connected && username ? username : "-";
*p2 ; p2++) {
if (op == 'm' && *p2 == '.')
break;
ADDBUF(*p2);
}
break;
case 'n':
for (p2 = connected ? username : "-"; *p2 ; p2++)
ADDBUF(*p2);
break;
case '%':
ADDBUF('%');
break;
default: /* display unknown codes literally */
ADDBUF('%');
ADDBUF(op);
break;
}
}
endbuf:
buf[i] = '\0';
}
/*
* Parse `port' into a TCP port number, defaulting to `defport' if `port' is
* an unknown service name. If defport != -1, print a warning upon bad parse.
*/
int
parseport(const char *port, int defport)
{
int rv;
long nport;
char *p, *ep;
p = xstrdup(port);
nport = strtol(p, &ep, 10);
if (*ep != '\0' && ep == p) {
struct servent *svp;
svp = getservbyname(port, "tcp");
if (svp == NULL) {
badparseport:
if (defport != -1)
warnx("Unknown port `%s', using port %d",
port, defport);
rv = defport;
} else
rv = ntohs(svp->s_port);
} else if (nport < 1 || nport > MAX_IN_PORT_T || *ep != '\0')
goto badparseport;
else
rv = nport;
free(p);
return (rv);
}
/*
* Determine if given string is an IPv6 address or not.
* Return 1 for yes, 0 for no
*/
int
2000-05-01 14:35:16 +04:00
isipv6addr(const char *addr)
{
int rv = 0;
#ifdef INET6
struct addrinfo hints, *res;
memset(&hints, 0, sizeof(hints));
hints.ai_family = PF_INET6;
hints.ai_socktype = SOCK_DGRAM; /*dummy*/
hints.ai_flags = AI_NUMERICHOST;
if (getaddrinfo(addr, "0", &hints, &res) != 0)
rv = 0;
else {
rv = 1;
freeaddrinfo(res);
}
if (debug)
fprintf(ttyout, "isipv6addr: got %d for %s\n", rv, addr);
#endif
return (rv == 1) ? 1 : 0;
}
/*
* Internal version of connect(2); sets socket buffer sizes first and
* supports a connection timeout using a non-blocking connect(2) with
* a poll(2).
* Socket fcntl flags are temporarily updated to include O_NONBLOCK;
* these will not be reverted on connection failure.
* Returns -1 upon failure (with errno set to the problem), or 0 on success.
*/
int
2000-05-01 14:35:16 +04:00
xconnect(int sock, const struct sockaddr *name, int namelen)
{
int flags, rv, timeout, error;
struct timeval endtime, now, td;
struct pollfd pfd[1];
setupsockbufsize(sock);
if ((flags = fcntl(sock, F_GETFL, 0)) == -1)
return -1; /* get current socket flags */
if (fcntl(sock, F_SETFL, flags | O_NONBLOCK) == -1)
return -1; /* set non-blocking connect */
/* NOTE: we now must restore socket flags on successful exit */
pfd[0].fd = sock;
pfd[0].events = POLLIN|POLLOUT;
if (quit_time > 0) { /* want a non default timeout */
(void)gettimeofday(&endtime, NULL);
endtime.tv_sec += quit_time; /* determine end time */
}
rv = connect(sock, name, namelen); /* inititate the connection */
if (rv == -1) { /* connection error */
if (errno != EINPROGRESS) /* error isn't "please wait" */
return -1;
/* connect EINPROGRESS; wait */
do {
if (quit_time > 0) { /* determine timeout */
(void)gettimeofday(&now, NULL);
timersub(&endtime, &now, &td);
timeout = td.tv_sec * 1000 + td.tv_usec/1000;
if (timeout < 0)
timeout = 0;
} else {
timeout = INFTIM;
}
pfd[0].revents = 0;
rv = xpoll(pfd, 1, timeout);
/* loop until poll ! EINTR */
} while (rv == -1 && errno == EINTR);
if (rv == 0) { /* poll (connect) timed out */
errno = ETIMEDOUT;
return -1;
}
if (rv == -1) { /* poll error */
return -1;
} else if (pfd[0].revents & (POLLIN|POLLOUT)) {
rv = sizeof(error); /* ok, or pending error */
if (getsockopt(sock, SOL_SOCKET, SO_ERROR,
&error, &rv) == -1)
return -1; /* Solaris pending error */
if (error != 0) {
errno = error; /* BSD pending error */
return -1;
}
} else {
errno = EBADF; /* this shouldn't happen ... */
return -1;
}
}
if (fcntl(sock, F_SETFL, flags) == -1) /* restore socket flags */
return -1;
return 0;
}
/*
* Internal version of listen(2); sets socket buffer sizes first.
*/
int
2000-05-01 14:35:16 +04:00
xlisten(int sock, int backlog)
{
setupsockbufsize(sock);
return (listen(sock, backlog));
}
/*
* Internal version of poll(2), to allow reimplementation by select(2)
2005-05-07 20:19:13 +04:00
* on platforms without the former.
*/
int
xpoll(struct pollfd *fds, int nfds, int timeout)
{
return poll(fds, nfds, timeout);
}
/*
* malloc() with inbuilt error checking
*/
void *
2000-05-01 14:35:16 +04:00
xmalloc(size_t size)
{
void *p;
p = malloc(size);
if (p == NULL)
err(1, "Unable to allocate %ld bytes of memory", (long)size);
return (p);
}
/*
* sl_init() with inbuilt error checking
*/
StringList *
2000-05-01 14:35:16 +04:00
xsl_init(void)
{
StringList *p;
p = sl_init();
if (p == NULL)
err(1, "Unable to allocate memory for stringlist");
return (p);
}
/*
* sl_add() with inbuilt error checking
*/
void
2000-05-01 14:35:16 +04:00
xsl_add(StringList *sl, char *i)
{
if (sl_add(sl, i) == -1)
err(1, "Unable to add `%s' to stringlist", i);
}
/*
* strdup() with inbuilt error checking
*/
char *
2000-05-01 14:35:16 +04:00
xstrdup(const char *str)
{
char *s;
if (str == NULL)
errx(1, "xstrdup() called with NULL argument");
s = strdup(str);
if (s == NULL)
err(1, "Unable to allocate memory for string copy");
return (s);
}