NetBSD/sys/lib/libsa/ufs.c

776 lines
17 KiB
C
Raw Normal View History

2000-03-30 16:19:46 +04:00
/* $NetBSD: ufs.c,v 1.30 2000/03/30 12:19:49 augustss Exp $ */
1994-10-26 08:44:32 +03:00
1994-01-26 05:03:32 +03:00
/*-
* Copyright (c) 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* The Mach Operating System project at Carnegie-Mellon University.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1994-01-26 05:03:32 +03:00
*
* Copyright (c) 1990, 1991 Carnegie Mellon University
* All Rights Reserved.
*
* Author: David Golub
*
1994-01-26 05:03:32 +03:00
* Permission to use, copy, modify and distribute this software and its
* documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
1994-01-26 05:03:32 +03:00
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
1994-01-26 05:03:32 +03:00
* Carnegie Mellon requests users of this software to return to
*
1994-01-26 05:03:32 +03:00
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
1994-01-26 05:03:32 +03:00
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*/
/*
* XXX NOTE: ufs.c (FFS) and lfs.c (LFS) should eventually use much common
* XXX code. until then, the two files should be easily diffable.
*/
1994-01-26 05:03:32 +03:00
/*
* Stand-alone file reading package.
*/
#include <sys/param.h>
#include <sys/time.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ufs/dir.h>
#include <ufs/ffs/fs.h>
1999-11-14 00:17:56 +03:00
#ifdef _STANDALONE
#include <lib/libkern/libkern.h>
#else
#include <string.h>
inline u_int
max(a, b)
u_int a, b;
{
return (a > b ? a : b);
}
#endif
1994-01-26 05:03:32 +03:00
#include "stand.h"
1999-02-11 12:10:43 +03:00
#include "ufs.h"
1994-01-26 05:03:32 +03:00
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if defined(LIBSA_FS_SINGLECOMPONENT) && !defined(LIBSA_NO_FS_SYMLINK)
#define LIBSA_NO_FS_SYMLINK
#endif
#if defined(COMPAT_UFS) && defined(LIBSA_NO_COMPAT_UFS)
#undef COMPAT_UFS
#endif
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
1994-01-26 05:03:32 +03:00
/*
* In-core open file.
*/
struct file {
off_t f_seekp; /* seek pointer */
struct fs *f_fs; /* pointer to super-block */
struct dinode f_di; /* copy of on-disk inode */
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
unsigned int f_nindir[NIADDR];
1994-01-26 05:03:32 +03:00
/* number of blocks mapped by
indirect block at level i */
char *f_blk[NIADDR]; /* buffer for indirect block at
level i */
size_t f_blksize[NIADDR];
1994-01-26 05:03:32 +03:00
/* size of buffer */
daddr_t f_blkno[NIADDR];/* disk address of block in buffer */
char *f_buf; /* buffer for data block */
size_t f_buf_size; /* size of data block */
1994-01-26 05:03:32 +03:00
daddr_t f_buf_blkno; /* block number of data block */
};
static int read_inode __P((ino_t, struct open_file *));
static int block_map __P((struct open_file *, daddr_t, daddr_t *));
static int buf_read_file __P((struct open_file *, char **, size_t *));
static int search_directory __P((char *, struct open_file *, ino_t *));
#ifdef COMPAT_UFS
static void ffs_oldfscompat __P((struct fs *));
#endif
1994-01-26 05:03:32 +03:00
/*
* Read a new inode into a file structure.
*/
static int
read_inode(inumber, f)
ino_t inumber;
struct open_file *f;
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
struct fs *fs = fp->f_fs;
1994-01-26 05:03:32 +03:00
char *buf;
size_t rsize;
1994-01-26 05:03:32 +03:00
int rc;
/*
* Read inode and save it.
*/
buf = alloc(fs->fs_bsize);
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
1995-02-21 09:33:22 +03:00
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ,
fsbtodb(fs, ino_to_fsba(fs, inumber)), fs->fs_bsize,
buf, &rsize);
1994-01-26 05:03:32 +03:00
if (rc)
goto out;
if (rsize != fs->fs_bsize) {
rc = EIO;
goto out;
}
{
2000-03-30 16:19:46 +04:00
struct dinode *dp;
1994-01-26 05:03:32 +03:00
dp = (struct dinode *)buf;
fp->f_di = dp[ino_to_fsbo(fs, inumber)];
1994-01-26 05:03:32 +03:00
}
/*
* Clear out the old buffers
*/
{
2000-03-30 16:19:46 +04:00
int level;
1994-01-26 05:03:32 +03:00
for (level = 0; level < NIADDR; level++)
fp->f_blkno[level] = -1;
fp->f_buf_blkno = -1;
}
out:
free(buf, fs->fs_bsize);
return (rc);
1994-01-26 05:03:32 +03:00
}
/*
* Given an offset in a file, find the disk block number that
* contains that block.
*/
static int
block_map(f, file_block, disk_block_p)
struct open_file *f;
daddr_t file_block;
daddr_t *disk_block_p; /* out */
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
struct fs *fs = fp->f_fs;
1994-01-26 05:03:32 +03:00
int level;
int idx;
daddr_t ind_block_num;
daddr_t *ind_p;
int rc;
/*
* Index structure of an inode:
*
* di_db[0..NDADDR-1] hold block numbers for blocks
* 0..NDADDR-1
*
* di_ib[0] index block 0 is the single indirect block
* holds block numbers for blocks
* NDADDR .. NDADDR + NINDIR(fs)-1
*
* di_ib[1] index block 1 is the double indirect block
* holds block numbers for INDEX blocks for blocks
* NDADDR + NINDIR(fs) ..
* NDADDR + NINDIR(fs) + NINDIR(fs)**2 - 1
*
* di_ib[2] index block 2 is the triple indirect block
* holds block numbers for double-indirect
* blocks for blocks
* NDADDR + NINDIR(fs) + NINDIR(fs)**2 ..
* NDADDR + NINDIR(fs) + NINDIR(fs)**2
* + NINDIR(fs)**3 - 1
*/
if (file_block < NDADDR) {
/* Direct block. */
*disk_block_p = fp->f_di.di_db[file_block];
return (0);
}
file_block -= NDADDR;
/*
* nindir[0] = NINDIR
* nindir[1] = NINDIR**2
* nindir[2] = NINDIR**3
* etc
*/
for (level = 0; level < NIADDR; level++) {
if (file_block < fp->f_nindir[level])
break;
file_block -= fp->f_nindir[level];
}
if (level == NIADDR) {
/* Block number too high */
return (EFBIG);
}
ind_block_num = fp->f_di.di_ib[level];
for (; level >= 0; level--) {
if (ind_block_num == 0) {
*disk_block_p = 0; /* missing */
return (0);
}
if (fp->f_blkno[level] != ind_block_num) {
if (fp->f_blk[level] == (char *)0)
fp->f_blk[level] =
alloc(fs->fs_bsize);
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
1995-02-21 09:33:22 +03:00
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ,
1994-01-26 05:03:32 +03:00
fsbtodb(fp->f_fs, ind_block_num),
fs->fs_bsize,
fp->f_blk[level],
&fp->f_blksize[level]);
1994-01-26 05:03:32 +03:00
if (rc)
return (rc);
if (fp->f_blksize[level] != fs->fs_bsize)
return (EIO);
fp->f_blkno[level] = ind_block_num;
}
ind_p = (daddr_t *)fp->f_blk[level];
if (level > 0) {
idx = file_block / fp->f_nindir[level - 1];
file_block %= fp->f_nindir[level - 1];
} else
idx = file_block;
ind_block_num = ind_p[idx];
}
*disk_block_p = ind_block_num;
return (0);
}
/*
* Read a portion of a file into an internal buffer. Return
* the location in the buffer and the amount in the buffer.
*/
static int
buf_read_file(f, buf_p, size_p)
struct open_file *f;
char **buf_p; /* out */
size_t *size_p; /* out */
1994-01-26 05:03:32 +03:00
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
struct fs *fs = fp->f_fs;
1994-01-26 05:03:32 +03:00
long off;
2000-03-30 16:19:46 +04:00
daddr_t file_block;
1994-01-26 05:03:32 +03:00
daddr_t disk_block;
size_t block_size;
1994-01-26 05:03:32 +03:00
int rc;
off = blkoff(fs, fp->f_seekp);
file_block = lblkno(fs, fp->f_seekp);
block_size = dblksize(fs, &fp->f_di, file_block);
if (file_block != fp->f_buf_blkno) {
rc = block_map(f, file_block, &disk_block);
if (rc)
return (rc);
if (fp->f_buf == (char *)0)
fp->f_buf = alloc(fs->fs_bsize);
if (disk_block == 0) {
bzero(fp->f_buf, block_size);
fp->f_buf_size = block_size;
} else {
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
1995-02-21 09:33:22 +03:00
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ,
1994-01-26 05:03:32 +03:00
fsbtodb(fs, disk_block),
block_size, fp->f_buf, &fp->f_buf_size);
if (rc)
return (rc);
}
fp->f_buf_blkno = file_block;
}
/*
* Return address of byte in buffer corresponding to
* offset, and size of remainder of buffer after that
* byte.
*/
*buf_p = fp->f_buf + off;
*size_p = block_size - off;
/*
* But truncate buffer at end of file.
*/
if (*size_p > fp->f_di.di_size - fp->f_seekp)
*size_p = fp->f_di.di_size - fp->f_seekp;
return (0);
}
/*
* Search a directory for a name and return its
* i_number.
*/
static int
search_directory(name, f, inumber_p)
char *name;
struct open_file *f;
ino_t *inumber_p; /* out */
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
struct direct *dp;
1994-01-26 05:03:32 +03:00
struct direct *edp;
char *buf;
size_t buf_size;
1994-01-26 05:03:32 +03:00
int namlen, length;
int rc;
length = strlen(name);
fp->f_seekp = 0;
while (fp->f_seekp < fp->f_di.di_size) {
rc = buf_read_file(f, &buf, &buf_size);
if (rc)
return (rc);
dp = (struct direct *)buf;
edp = (struct direct *)(buf + buf_size);
while (dp < edp) {
if (dp->d_ino == (ino_t)0)
goto next;
#if BYTE_ORDER == LITTLE_ENDIAN
if (fp->f_fs->fs_maxsymlinklen <= 0)
namlen = dp->d_type;
else
#endif
namlen = dp->d_namlen;
if (namlen == length &&
!strcmp(name, dp->d_name)) {
/* found entry */
*inumber_p = dp->d_ino;
return (0);
}
next:
dp = (struct direct *)((char *)dp + dp->d_reclen);
}
fp->f_seekp += buf_size;
}
return (ENOENT);
}
/*
* Open a file.
*/
int
ufs_open(path, f)
char *path;
struct open_file *f;
{
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_FS_SINGLECOMPONENT
2000-03-30 16:19:46 +04:00
char *cp, *ncp;
int c;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
ino_t inumber;
1994-01-26 05:03:32 +03:00
struct file *fp;
struct fs *fs;
int rc;
size_t buf_size;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_SYMLINK
ino_t parent_inumber;
int nlinks = 0;
1994-01-26 05:03:32 +03:00
char namebuf[MAXPATHLEN+1];
char *buf = NULL;
#endif
1994-01-26 05:03:32 +03:00
/* allocate file system specific data structure */
fp = alloc(sizeof(struct file));
bzero(fp, sizeof(struct file));
f->f_fsdata = (void *)fp;
/* allocate space and read super block */
fs = alloc(SBSIZE);
fp->f_fs = fs;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
1995-02-21 09:33:22 +03:00
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ,
1994-01-26 05:03:32 +03:00
SBLOCK, SBSIZE, (char *)fs, &buf_size);
if (rc)
goto out;
if (buf_size != SBSIZE || fs->fs_magic != FS_MAGIC ||
fs->fs_bsize > MAXBSIZE || fs->fs_bsize < sizeof(struct fs)) {
rc = EINVAL;
goto out;
}
#ifdef COMPAT_UFS
ffs_oldfscompat(fs);
#endif
1994-01-26 05:03:32 +03:00
/*
* Calculate indirect block levels.
*/
{
2000-03-30 16:19:46 +04:00
int mult;
int level;
1994-01-26 05:03:32 +03:00
mult = 1;
for (level = 0; level < NIADDR; level++) {
mult *= NINDIR(fs);
fp->f_nindir[level] = mult;
}
}
inumber = ROOTINO;
if ((rc = read_inode(inumber, f)) != 0)
goto out;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_FS_SINGLECOMPONENT
1994-01-26 05:03:32 +03:00
cp = path;
while (*cp) {
/*
* Remove extra separators
*/
while (*cp == '/')
cp++;
if (*cp == '\0')
break;
/*
* Check that current node is a directory.
*/
if ((fp->f_di.di_mode & IFMT) != IFDIR) {
rc = ENOTDIR;
goto out;
}
/*
* Get next component of path name.
*/
{
2000-03-30 16:19:46 +04:00
int len = 0;
1994-01-26 05:03:32 +03:00
ncp = cp;
while ((c = *cp) != '\0' && c != '/') {
if (++len > MAXNAMLEN) {
rc = ENOENT;
goto out;
}
cp++;
}
*cp = '\0';
}
/*
* Look up component in current directory.
* Save directory inumber in case we find a
* symbolic link.
*/
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_SYMLINK
1994-01-26 05:03:32 +03:00
parent_inumber = inumber;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
1994-01-26 05:03:32 +03:00
rc = search_directory(ncp, f, &inumber);
*cp = c;
if (rc)
goto out;
/*
* Open next component.
*/
if ((rc = read_inode(inumber, f)) != 0)
goto out;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_SYMLINK
1994-01-26 05:03:32 +03:00
/*
* Check for symbolic link.
*/
if ((fp->f_di.di_mode & IFMT) == IFLNK) {
1994-01-26 05:03:32 +03:00
int link_len = fp->f_di.di_size;
int len;
len = strlen(cp);
1994-01-26 05:03:32 +03:00
if (link_len + len > MAXPATHLEN ||
++nlinks > MAXSYMLINKS) {
1994-01-26 05:03:32 +03:00
rc = ENOENT;
goto out;
}
bcopy(cp, &namebuf[link_len], len + 1);
1994-01-26 05:03:32 +03:00
if (link_len < fs->fs_maxsymlinklen) {
bcopy(fp->f_di.di_shortlink, namebuf,
(unsigned) link_len);
1994-01-26 05:03:32 +03:00
} else {
/*
* Read file for symbolic link
*/
size_t buf_size;
daddr_t disk_block;
2000-03-30 16:19:46 +04:00
struct fs *fs = fp->f_fs;
if (!buf)
buf = alloc(fs->fs_bsize);
rc = block_map(f, (daddr_t)0, &disk_block);
if (rc)
goto out;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
1995-02-21 09:33:22 +03:00
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata,
F_READ, fsbtodb(fs, disk_block),
fs->fs_bsize, buf, &buf_size);
1994-01-26 05:03:32 +03:00
if (rc)
goto out;
bcopy((char *)buf, namebuf, (unsigned)link_len);
}
/*
* If relative pathname, restart at parent directory.
* If absolute pathname, restart at root.
*/
cp = namebuf;
if (*cp != '/')
inumber = parent_inumber;
else
inumber = (ino_t)ROOTINO;
if ((rc = read_inode(inumber, f)) != 0)
1994-01-26 05:03:32 +03:00
goto out;
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !LIBSA_NO_FS_SYMLINK */
1994-01-26 05:03:32 +03:00
}
/*
* Found terminal component.
*/
rc = 0;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#else /* !LIBSA_FS_SINGLECOMPONENT */
/* look up component in the current (root) directory */
rc = search_directory(path, f, &inumber);
if (rc)
goto out;
/* open it */
rc = read_inode(inumber, f);
#endif /* !LIBSA_FS_SINGLECOMPONENT */
fp->f_seekp = 0; /* reset seek pointer */
1994-01-26 05:03:32 +03:00
out:
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_SYMLINK
if (buf)
free(buf, fs->fs_bsize);
#endif
if (rc) {
if (fp->f_buf)
free(fp->f_buf, fp->f_fs->fs_bsize);
free(fp->f_fs, SBSIZE);
1994-01-26 05:03:32 +03:00
free(fp, sizeof(struct file));
}
1994-01-26 05:03:32 +03:00
return (rc);
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_CLOSE
1994-01-26 05:03:32 +03:00
int
ufs_close(f)
struct open_file *f;
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
1994-01-26 05:03:32 +03:00
int level;
f->f_fsdata = (void *)0;
if (fp == (struct file *)0)
return (0);
for (level = 0; level < NIADDR; level++) {
if (fp->f_blk[level])
free(fp->f_blk[level], fp->f_fs->fs_bsize);
}
if (fp->f_buf)
free(fp->f_buf, fp->f_fs->fs_bsize);
free(fp->f_fs, SBSIZE);
free(fp, sizeof(struct file));
return (0);
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !LIBSA_NO_FS_CLOSE */
1994-01-26 05:03:32 +03:00
/*
* Copy a portion of a file into kernel memory.
* Cross block boundaries when necessary.
*/
int
ufs_read(f, start, size, resid)
struct open_file *f;
void *start;
size_t size;
size_t *resid; /* out */
1994-01-26 05:03:32 +03:00
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
size_t csize;
1994-01-26 05:03:32 +03:00
char *buf;
size_t buf_size;
1994-01-26 05:03:32 +03:00
int rc = 0;
2000-03-30 16:19:46 +04:00
char *addr = start;
1994-01-26 05:03:32 +03:00
while (size != 0) {
if (fp->f_seekp >= fp->f_di.di_size)
break;
rc = buf_read_file(f, &buf, &buf_size);
if (rc)
break;
csize = size;
if (csize > buf_size)
csize = buf_size;
bcopy(buf, addr, csize);
1994-01-26 05:03:32 +03:00
fp->f_seekp += csize;
addr += csize;
1994-01-26 05:03:32 +03:00
size -= csize;
}
if (resid)
*resid = size;
return (rc);
}
/*
* Not implemented.
*/
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_WRITE
1994-01-26 05:03:32 +03:00
int
ufs_write(f, start, size, resid)
struct open_file *f;
void *start;
size_t size;
size_t *resid; /* out */
1994-01-26 05:03:32 +03:00
{
return (EROFS);
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !LIBSA_NO_FS_WRITE */
1994-01-26 05:03:32 +03:00
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#ifndef LIBSA_NO_FS_SEEK
1994-01-26 05:03:32 +03:00
off_t
ufs_seek(f, offset, where)
struct open_file *f;
off_t offset;
int where;
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
1994-01-26 05:03:32 +03:00
switch (where) {
case SEEK_SET:
fp->f_seekp = offset;
break;
case SEEK_CUR:
fp->f_seekp += offset;
break;
case SEEK_END:
fp->f_seekp = fp->f_di.di_size - offset;
break;
default:
return (-1);
}
return (fp->f_seekp);
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !LIBSA_NO_FS_SEEK */
1994-01-26 05:03:32 +03:00
int
ufs_stat(f, sb)
struct open_file *f;
struct stat *sb;
{
2000-03-30 16:19:46 +04:00
struct file *fp = (struct file *)f->f_fsdata;
1994-01-26 05:03:32 +03:00
/* only important stuff */
sb->st_mode = fp->f_di.di_mode;
sb->st_uid = fp->f_di.di_uid;
sb->st_gid = fp->f_di.di_gid;
sb->st_size = fp->f_di.di_size;
return (0);
}
#ifdef COMPAT_UFS
/*
* Sanity checks for old file systems.
*
* XXX - goes away some day.
*/
static void
ffs_oldfscompat(fs)
struct fs *fs;
{
int i;
fs->fs_npsect = max(fs->fs_npsect, fs->fs_nsect); /* XXX */
fs->fs_interleave = max(fs->fs_interleave, 1); /* XXX */
if (fs->fs_postblformat == FS_42POSTBLFMT) /* XXX */
fs->fs_nrpos = 8; /* XXX */
if (fs->fs_inodefmt < FS_44INODEFMT) { /* XXX */
quad_t sizepb = fs->fs_bsize; /* XXX */
/* XXX */
fs->fs_maxfilesize = fs->fs_bsize * NDADDR - 1; /* XXX */
for (i = 0; i < NIADDR; i++) { /* XXX */
sizepb *= NINDIR(fs); /* XXX */
fs->fs_maxfilesize += sizepb; /* XXX */
} /* XXX */
fs->fs_qbmask = ~fs->fs_bmask; /* XXX */
fs->fs_qfmask = ~fs->fs_fmask; /* XXX */
} /* XXX */
}
#endif