NetBSD/sys/arch/i386/isa/pcvt/pcvt_hdr.h

1630 lines
63 KiB
C
Raw Normal View History

1994-11-04 22:08:19 +03:00
/* $NetBSD: pcvt_hdr.h,v 1.11 1994/11/04 19:08:19 mycroft Exp $ */
1994-10-27 07:14:23 +03:00
/*
* Copyright (c) 1992,1993,1994 Hellmuth Michaelis, Brian Dunford-Shore
* and Joerg Wunsch
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by
* Hellmuth Michaelis, Brian Dunford-Shore and Joerg Wunsch.
* 4. The name authors may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* @(#)pcvt_hdr.h, 3.00, Last Edit-Date: [Tue Mar 1 20:15:21 1994]
*
*/
/*---------------------------------------------------------------------------
*
* pcvt_hdr.h VT220 Driver Global Include File
* ------------------------------------------------
* -hm screensaver update from joerg
* -hm ctrl-alt-delete enclosed in ifdef's
* -hm driver name changed from "pc" -> "vt"
* -hm #define-able compile time options
* -jw include rather primitive X stuff
* -hm NetBSD 0.8 support
* -hm NetBSD-current support
* -hm converting to memory mapped virtual screens
* -hm adding et4000/wd/paradise vga register names
* -hm 132 column support for et4000/wd/paradise
* -hm updated WD90C11 register definitions
* -hm patches from joerg for 2.20 alpha 1
* -hm max screen memory definitions
* -hm Video 7 register definitions
* -hm keyboard initialization for ddb activists ...
* -hm include cpufunc.h for netbsd 0.9
* -hm Trident definitions
* -hm cpufunc.h only for netbsd
* -hm ignore keyboard security lock conditional
* -hm vga chiptype definitions moved to pcvt-ioctl.h
* -hm force 24 lines operation
* -jw USL VT compatibility
* -hm int pcstart() -> void pcstart()
* -hm opsys defines from joerg
* -hm made sleeping-while-scrollock-patch from joerg running
* -hm keyboard again ....
* -hm housekeeping and source restructuring
* -jw mouse emulation mode
* -jw all ifdef's converted to if's
* -hm patch from Joerg, PCVT_INHIBIT_NUMLOCK for notebooks
* -jw cleaned up the key prefix recognition
* -jw included PCVT_META_ESC
* -hm kludge to get NetBSD 0.9 compilation right (!?)
* -hm FreeBSD-current patches from Joerg
* -hm PCVT_NETBSD=XXX for version defines
* -hm #include dev/cons.h for NetBSD-current
* -hm intro of PCVT_PCBURST for netbsd
* -hm last second nitty-gritty from Joerg :-)
* -hm ------------ Release 3.00 --------------
*
*---------------------------------------------------------------------------*/
#ifdef PCVT_NETBSD
#undef PCVT_NETBSD
#endif
1994-11-04 22:08:19 +03:00
#define PCVT_NETBSD 11
#include "param.h"
#include "conf.h"
#include "ioctl.h"
#include "proc.h"
#include "user.h"
#include "tty.h"
#include "uio.h"
#include "callout.h"
#include "systm.h"
#include "kernel.h"
#include "syslog.h"
#include "malloc.h"
#include "time.h"
#if PCVT_NETBSD > 9
#include "device.h"
#endif
#if PCVT_NETBSD > 9
#include "i386/isa/isavar.h"
#else
#include "i386/isa/isa_device.h"
#endif
1994-11-04 22:08:19 +03:00
#if PCVT_NETBSD <= 10
#include "i386/isa/icu.h"
1994-11-04 22:08:19 +03:00
#endif
#include "i386/isa/isareg.h"
#if PCVT_NETBSD > 9
#include "dev/cons.h"
#else
#include "i386/i386/cons.h"
#endif
1994-04-04 02:50:14 +04:00
#if PCVT_NETBSD <= 9
#include "machine/psl.h"
#include "machine/frame.h"
1994-04-04 02:50:14 +04:00
#endif
#include "machine/stdarg.h"
#if PCVT_NETBSD > 9
#include "i386/isa/pcvt/pcvt_ioctl.h"
#else
#include "machine/pcvt_ioctl.h"
#endif
#include "machine/pc/display.h"
#include "vm/vm_kern.h"
#define PCVT_REL "3.00" /* driver attach announcement */
/* this is checked with ispcvt */
/* see also: pcvt_ioctl.h */
/*======================================================================*
* START OF CONFIGURATION SECTION *
*======================================================================*/
/*
* Note that each of the options below should rather be overriden by the
* kernel config file instead of this .h file - this allows for different
* definitions in different kernels compiled at the same machine
*
* The convention is as follows:
*
* options "PCVT_FOO=1" - enables the option
* options "PCVT_FOO" - is a synonym for the above
* options "PCVT_FOO=0" - disables the option
*
* omitting an option defaults to what is shown below
*
* exceptions from this rule:
*
* options "PCVT_NSCREENS=x"
* options "PCVT_SCANSET=x"
* options "PCVT_UPDATEFAST=x"
* options "PCVT_UPDATESLOW=x"
* options "PCVT_SYSBEEPF=x"
*
* are always numeric!
*/
/* -------------------------------------------------------------------- */
/* -------------------- OPERATING SYSTEM ------------------------------ */
/* -------------------------------------------------------------------- */
/* one of the following options must be set in the kernel config file: */
/* options "PCVT_386BSD" enable support for 386BSD + pk 0.2.4 */
/* options "PCVT_NETBSD" enable support for NetBSD */
/* PCVT_NETBSD = 9 for the NetBSD 0.9 release */
/* PCVT_NETBSD > 9 for NetBSD-current (tested with february 5th '94) */
/* options "PCVT_FREEBSD" enable support for FreeBSD */
/* PCVT_FREEBSD = 102 for 1.0 release (actually 1.0.2) */
/* PCVT_FREEBSD = 103 for -current [as around 31 Jan 94] */
/* PCVT_FREEBSD = 110 for 1.1 release (still to come :-) */
/* -------------------------------------------------------------------- */
/* ---------------- USER PREFERENCE DRIVER OPTIONS -------------------- */
/* -------------------------------------------------------------------- */
#if !defined PCVT_NSCREENS /* ---------- DEFAULT: 8 -------------- */
#define PCVT_NSCREENS 8 /* this option defines how many virtual */
#endif /* screens you want to have in your */
/* system. each screen allocates memory,*/
/* so you can't have an unlimited num- */
/* ber...; the value is intented to be */
/* compile-time overridable by a config */
/* options "PCVT_NSCREENS=x" line */
#if !defined PCVT_VT220KEYB /* ---------- DEFAULT: OFF ------------ */
# define PCVT_VT220KEYB 0 /* this compiles a more vt220-like */
#elif PCVT_VT220KEYB != 0 /* keyboardlayout as described in the */
# undef PCVT_VT220KEYB /* file Keyboard.VT220. */
# define PCVT_VT220KEYB 1 /* if undefined, a more HP-like */
#endif /* keyboardlayout is compiled */
/* try to find out what YOU like ! */
#if !defined PCVT_SCREENSAVER /* ---------- DEFAULT: ON ------------- */
# define PCVT_SCREENSAVER 1 /* enable screen saver feature - this */
#elif PCVT_SCREENSAVER != 0 /* just blanks the display screen. */
# undef PCVT_SCREENSAVER /* see PCVT_PRETTYSCRNS below ... */
# define PCVT_SCREENSAVER 1
#endif
#if !defined PCVT_PRETTYSCRNS /* ---------- DEFAULT: ON ------------- */
# define PCVT_PRETTYSCRNS 0 /* for the cost of some microseconds of */
#elif PCVT_PRETTYSCRNS != 0 /* cpu time this adds a more "pretty" */
#undef PCVT_PRETTYSCRNS /* version to the screensaver, an "*" */
#define PCVT_PRETTYSCRNS 1 /* in random locations of the display. */
#endif /* NOTE: this should not be defined if */
/* you have an energy-saving monitor */
/* which turns off the display if its */
/* black !!!!!! */
#if !defined PCVT_CTRL_ALT_DEL /* ---------- DEFAULT: OFF ------------ */
# define PCVT_CTRL_ALT_DEL 0 /* this enables the execution of a cpu */
#elif PCVT_CTRL_ALT_DEL != 0 /* reset by pressing the CTRL, ALT and */
# undef PCVT_CTRL_ALT_DEL /* DEL keys simultanously. Because this */
# define PCVT_CTRL_ALT_DEL 1 /* is a feature of an ancient simple */
#endif /* bootstrap loader, it does not belong */
/* into modern operating systems and */
/* was commented out by default ... */
#if !defined PCVT_USEKBDSEC /* ---------- DEFAULT: ON ------------- */
# define PCVT_USEKBDSEC 1 /* do not set the COMMAND_INHOVR bit */
#elif PCVT_USEKBDSEC != 0 /* (1 = override security lock inhibit) */
#undef PCVT_USEKBDSEC /* when initializing the keyboard, so */
#define PCVT_USEKBDSEC 1 /* that security locking should work */
#endif /* now. I guess this has to be done also*/
/* in the boot code to prevent single */
/* user startup .... */
#if !defined PCVT_24LINESDEF /* ---------- DEFAULT: OFF ------------ */
# define PCVT_24LINESDEF 0 /* use 24 lines in VT 25 lines mode and */
#elif PCVT_24LINESDEF != 0 /* HP 28 lines mode by default to have */
#undef PCVT_24LINESDEF /* the the better compatibility to the */
#define PCVT_24LINESDEF 1 /* real VT220 - you can switch between */
#endif /* the maximum possible screensizes in */
/* those two modes (25 lines) and true */
/* compatibility (24 lines) by using */
/* the scon utility at runtime */
#if !defined PCVT_EMU_MOUSE /* ---------- DEFAULT: OFF ------------ */
# define PCVT_EMU_MOUSE 0 /* emulate a mouse systems mouse via */
#elif PCVT_EMU_MOUSE != 0 /* the keypad; this is experimental */
# undef PCVT_EMU_MOUSE /* code intented to be used on note- */
# define PCVT_EMU_MOUSE 1 /* books in conjunction with XFree86; */
#endif /* look at the comments in pcvt_kbd.c */
/* if you are interested in testing it. */
#if !defined PCVT_META_ESC /* ---------- DEFAULT: OFF ------------ */
# define PCVT_META_ESC 0 /* if ON, send the sequence "ESC key" */
#elif PCVT_META_ESC != 0 /* for a meta-shifted key; if OFF, */
# undef PCVT_META_ESC /* send the normal key code with 0x80 */
# define PCVT_META_ESC 1 /* added. */
#endif
/* -------------------------------------------------------------------- */
/* -------------------- DRIVER DEBUGGING ------------------------------ */
/* -------------------------------------------------------------------- */
#if !defined PCVT_SHOWKEYS /* ---------- DEFAULT: OFF ------------ */
# define PCVT_SHOWKEYS 0 /* this replaces the system load line */
#elif PCVT_SHOWKEYS != 0 /* on the vt 0 in hp mode with a display*/
# undef PCVT_SHOWKEYS /* of the most recent keyboard scan- */
# define PCVT_SHOWKEYS 1 /* and status codes received from the */
#endif /* keyboard controller chip. */
/* this is just for some hardcore */
/* keyboarders .... */
/* -------------------------------------------------------------------- */
/* -------------------- DRIVER OPTIONS -------------------------------- */
/* -------------------------------------------------------------------- */
/* it is unlikely that anybody wants to change anything below */
#if !defined PCVT_PCBURST /* ---------- DEFAULT: 256 ------------ */
#define PCVT_PCBURST 256 /* NETBSD only: this is the number of */
#endif /* characters handled as a burst in */
/* routine pcstart(), file pcvt_drv.c */
#if !defined PCVT_SCANSET /* ---------- DEFAULT: 1 -------------- */
# define PCVT_SCANSET 1 /* define the keyboard scancode set you */
#endif /* want to use: */
/* 1 - code set 1 (supported) */
/* 2 - code set 2 (supported) */
/* 3 - code set 3 (UNsupported) */
#if !defined PCVT_KEYBDID /* ---------- DEFAULT: ON ------------- */
# define PCVT_KEYBDID 1 /* check type of keyboard connected. at */
#elif PCVT_KEYBDID != 0 /* least HP-keyboards send a id other */
# undef PCVT_KEYBDID /* than the industry standard, so it */
# define PCVT_KEYBDID 1 /* CAN lead to problems. if you have */
#endif /* problems with this, TELL ME PLEASE ! */
#if !defined PCVT_SIGWINCH /* ---------- DEFAULT: ON ------------- */
# define PCVT_SIGWINCH 1 /* this sends a SIGWINCH signal in case */
#elif PCVT_SIGWINCH != 0 /* the window size is changed. to try, */
#undef PCVT_SIGWINCH /* issue "scons -s<size>" while in elvis*/
#define PCVT_SIGWINCH 1 /* and you'll see the effect. */
#endif /* i'm not sure, whether this feature */
/* has to be in the driver or has to */
/* move as a ioctl call to scon .... */
#if !defined PCVT_NULLCHARS /* ---------- DEFAULT: ON ------------- */
# define PCVT_NULLCHARS 1 /* allow the keyboard to send null */
1994-07-07 23:31:31 +04:00
#elif PCVT_NULLCHARS != 0 /* (0x00) characters to the calling */
# undef PCVT_NULLCHARS /* program. this has the side effect, */
# define PCVT_NULLCHARS 1 /* that every undefined key also sends */
#endif /* out nulls. take it as experimental */
/* code, this behaviour will change in */
/* a future release */
#if !defined PCVT_BACKUP_FONTS /* ---------- DEFAULT: ON ------------- */
# define PCVT_BACKUP_FONTS 1 /* fonts are always kept memory-backed; */
#elif PCVT_BACKUP_FONTS != 0 /* otherwise copies are only made if */
# undef PCVT_BACKUP_FONTS /* they are needed. */
# define PCVT_BACKUP_FONTS 1
#endif
#if !defined PCVT_FORCE8BIT /* ---------- DEFAULT: OFF ------------ */
#define PCVT_FORCE8BIT 0 /* this forces the read channel to */
#elif PCVT_FORCE8BIT != 0 /* 8 bit on terminal reads. this is */
#undef PCVT_FORCE8BIT /* a real kludge, have a look at file */
#define PCVT_FORCE8BIT 1 /* pcvt_drv.c to see what this does .. */
#endif
#ifndef PCVT_UPDATEFAST /* this is the rate at which the cursor */
#define PCVT_UPDATEFAST (hz/10) /* gets updated with it's new position */
#endif /* see: async_update() in pcvt_sup.c */
#ifndef PCVT_UPDATESLOW /* this is the rate at which the cursor */
#define PCVT_UPDATESLOW 3 /* position display and the system load */
#endif /* (or the keyboard scancode display) */
/* is updated. the relation is: */
/* PCVT_UPDATEFAST/PCVT_UPDATESLOW */
#ifndef PCVT_SYSBEEPF /* timer chip value to be used for the */
#define PCVT_SYSBEEPF 1193182 /* sysbeep frequency value. */
#endif /* this should really go somewhere else,*/
/* e.g. in isa.h; but it used to be in */
/* each driver, sometimes even with */
/* different values (:-) */
#if !defined PCVT_NEEDPG /* ---------- DEFAULT: OFF ------------ */
# define PCVT_NEEDPG 0 /* pg moved out to cons.c with pk 0.2.2 */
#elif PCVT_NEEDPG != 0 /* if you run a system with patchkit */
# undef PCVT_NEEDPG /* 0.2.1 or earlier you must define this*/
# define PCVT_NEEDPG 1
#endif
#if !defined PCVT_SETCOLOR /* ---------- DEFAULT: OFF ------------ */
# define PCVT_SETCOLOR 0 /* enable making colors settable. this */
#elif PCVT_SETCOLOR != 0 /* introduces a new escape sequence */
# undef PCVT_SETCOLOR /* <ESC d> which is (i think) not */
# define PCVT_SETCOLOR 1 /* standardized, so this is an option */
#endif
#if !defined PCVT_132GENERIC /* ---------- DEFAULT: OFF ------------ */
# define PCVT_132GENERIC 0 /* if you #define this, you enable */
#elif PCVT_132GENERIC != 0 /* EXPERIMENTAL (!!!!!!!!!!!!) */
# undef PCVT_132GENERIC /* USE-AT-YOUR-OWN-RISK, */
# define PCVT_132GENERIC 1 /* MAY-DAMAGE-YOUR-MONITOR */
#endif /* code to switch generic VGA boards/ */
/* chipsets to 132 column mode. Since */
/* i could not verify this option, i */
/* prefer to NOT generally enable this, */
/* if you want to play, look at the */
/* hints and the code in pcvt_sup.c and */
/* get in contact with Joerg Wunsch, who*/
/* submitted this code. Be careful !!! */
#if !defined PCVT_PALFLICKER /* ---------- DEFAULT: OFF ------------ */
#define PCVT_PALFLICKER 0 /* this option turns off the screen */
#elif PCVT_PALFLICKER != 0 /* during accesses to the VGA DAC */
#undef PCVT_PALFLICKER /* registers. why: on one fo the tested */
#define PCVT_PALFLICKER 1 /* pc's (WD-chipset), accesses to the */
#endif /* vga dac registers caused distortions */
/* on the screen. Ferraro says, one has */
/* to blank the screen. the method used */
/* to accomplish this stopped the noise */
/* but introduced another flicker, so */
/* this is for you to experiment ..... */
/* - see also PCVT_WAITRETRACE below -- */
#if !defined PCVT_WAITRETRACE /* ---------- DEFAULT: OFF ------------ */
#define PCVT_WAITRETRACE 0 /* this option waits for being in a */
#elif PCVT_WAITRETRACE != 0 /* retrace window prior to accessing */
#undef PCVT_WAITRETRACE /* the VGA DAC registers. */
#define PCVT_WAITRETRACE 1 /* this is the other method Ferraro */
#endif /* mentioned in his book. this option */
/* did eleminate the flicker noticably */
/* but not completely. besides that, it */
/* is implemented as a busy-wait loop */
/* which is a no-no-no in environments */
/* like this - VERY BAD PRACTICE !!!!! */
/* the other method implementing it is */
/* using the vertical retrace irq, but */
/* we get short of irq-lines on pc's. */
/* this is for you to experiment ..... */
/* -- see also PCVT_PALFLICKER above -- */
#if !defined PCVT_INHIBIT_NUMLOCK /* --------- DEFAULT: OFF ----------- */
#define PCVT_INHIBIT_NUMLOCK 0 /* A notebook hack: since i am getting */
#elif PCVT_INHIBIT_NUMLOCK != 0 /* tired of the numlock LED always */
#undef PCVT_INHIBIT_NUMLOCK /* being turned on - which causes the */
#define PCVT_INHIBIT_NUMLOCK 1 /* right half of my keyboard being */
#endif /* interpreted as a numeric keypad and */
/* thus going unusable - i want to */
/* have a better control over it. If */
/* this option is enabled, only the */
/* numlock key itself and the related */
/* ioctls will modify the numlock */
/* LED. (The ioctl is needed for the */
/* ServerNumLock feature of XFree86.) */
/* The default state is changed to */
/* numlock off, and the escape */
/* sequences to switch between numeric */
/* and application mode keypad are */
/* silently ignored. */
#ifdef XSERVER
#if !defined PCVT_USL_VT_COMPAT /* ---------- DEFAULT: ON ------------- */
# define PCVT_USL_VT_COMPAT 1 /* emulate some compatibility ioctls */
#elif PCVT_USL_VT_COMPAT != 0 /* this is not a full USL VT compatibi- */
#undef PCVT_USL_VT_COMPAT /* lity, but just enough to fool XFree86*/
#define PCVT_USL_VT_COMPAT 1 /* release 2 (or higher) in believing */
#endif /* it runs on syscons and thus enabling */
/* the stuff to switch VTs within an X */
/* session */
#if !defined PCVT_FAKE_SYSCONS10/* ---------- DEFAULT: OFF ------------ */
# define PCVT_FAKE_SYSCONS10 0 /* fake syscons 1.0; this causes XFree86*/
#elif PCVT_FAKE_SYSCONS10 != 0 /* 2.0 to use the VT_OPENQRY ioctl in */
# undef PCVT_FAKE_SYSCONS10 /* order to test for a free vt to use */
# define PCVT_FAKE_SYSCONS10 1 /* This is NOT REQUIRED, and not enabled*/
#endif /* by default due to the possible */
/* confusion for other utilities. */
/* NB: XFree86 (tm) version 2.1 will be */
/* fixed w.r.t. VT_OPENQRY */
#endif /* XSERVER */
/* perform some consistency checks */
#if defined PCVT_386BSD && PCVT_386BSD != 0
#undef PCVT_386BSD
#define PCVT_386BSD 1
#endif
#if defined PCVT_FREEBSD && PCVT_FREEBSD == 1
# undef PCVT_FREEBSD
# define PCVT_FREEBSD 102 /* assume 1.0 release */
#endif
#if defined PCVT_NETBSD && PCVT_NETBSD == 1
#undef PCVT_NETBSD
#define PCVT_NETBSD 9 /* assume 0.9 release for now */
#endif
#if PCVT_386BSD + PCVT_FREEBSD + PCVT_NETBSD == 0
# error "pcvt_hdr.h: You MUST define one of PCVT_{386,NET,FREE}BSD \
in the config file"
#elif (PCVT_386BSD && (PCVT_FREEBSD || PCVT_NETBSD)) || \
(PCVT_NETBSD && (PCVT_FREEBSD || PCVT_386BSD)) || \
(PCVT_FREEBSD && (PCVT_386BSD || PCVT_NETBSD))
# error "pcvt_hdr.h: You should only define *one* of PCVT_{386,NET,FREE}BSD \
in the config file"
#endif
#ifdef XSERVER
/* PCVT_NULLCHARS is mandatory for X server */
#if !PCVT_NULLCHARS
#undef PCVT_NULLCHARS
#define PCVT_NULLCHARS 1
#endif
/* PCVT_BACKUP_FONTS is mandatory for PCVT_USL_VT_COMPAT */
#if PCVT_USL_VT_COMPAT && !PCVT_BACKUP_FONTS
#undef PCVT_BACKUP_FONTS
#define PCVT_BACKUP_FONTS 1
#endif
#else /* XSERVER */
#if PCVT_USL_VT_COMPAT
#warning "Option PCVT_USL_VT_COMPAT meaningless without XSERVER"
#undef PCVT_USL_VT_COMPAT
#define PCVT_USL_VT_COMPAT 0
#endif
#endif /* XSERVER */
/* #undef PCVT_NEEDPG is mandatory for PCVT_NETBSD and PCVT_FREEBSD */
#if (PCVT_NETBSD || PCVT_FREEBSD) && PCVT_NEEDPG
#undef PCVT_NEEDPG
#define PCVT_NEEDPG 0
#endif
/* PCVT_SCREENSAVER is mandatory for PCVT_PRETTYSCRNS */
#if PCVT_PRETTYSCRNS && !PCVT_SCREENSAVER
#undef PCVT_SCREENSAVER
#define PCVT_SCREENSAVER 1
#endif
/* PCVT_FAKE_SYSCONS10 meaningless without PCVT_USL_VT_COMPAT */
#if PCVT_FAKE_SYSCONS10 && !PCVT_USL_VT_COMPAT
#undef PCVT_FAKE_SYSCONS10
#define PCVT_FAKE_SYSCONS10 0
#endif
#if PCVT_FAKE_SYSCONS10
# warning "options PCVT_FAKE_SYSCONS10 will be removed in the next release"
#endif
/* get the inline inb/outb back again ... */
#if PCVT_NETBSD
#if PCVT_NETBSD == 9
#include "machine/cpufunc.h" /* NetBSD 0.9 [...and earlier -currents] */
#undef PCVT_USL_VT_COMPAT
#define PCVT_USL_VT_COMPAT 0 /* does not work, workaround ... */
#else
#include "machine/pio.h" /* recent NetBSD -currents */
#define NEW_AVERUNNABLE /* averunnable changes for younger currents */
#endif /* PCVT_NETBSD == 9 */
#endif /* PCVT_NETBSD */
#if PCVT_SCANSET !=1 && PCVT_SCANSET !=2
#error "Supported keyboard scancode sets are 1 and 2 only (for now)!!!"
#endif
/*---------------------------------------------------------------------------
COLORS:
be careful when designing color combinations, because on
EGA and VGA displays, bit 3 of the attribute byte is used
for characterset switching, and is no longer available for
foreground intensity (bold)!
---------------------------------------------------------------------------*/
/*---------------------------------------------------------------------------*
* INTERNAL COLOR DEFINITIONS - KERNEL
*---------------------------------------------------------------------------*/
#define COLOR_KERNEL_FG FG_LIGHTGREY /* kernel messages, foreground */
#define COLOR_KERNEL_BG BG_RED /* kernel messages, background */
/* monochrome displays - really don't know if it fits ... */
#define MONO_KERNEL_FG FG_UNDERLINE /* kernel messages, foreground */
#define MONO_KERNEL_BG BG_BLACK /* kernel messages, background */
/*======================================================================*
* END OF CONFIGURATION SECTION *
*======================================================================*/
/*---------------------------------------------------------------------------*
* Keyboard and Keyboard Controller
*---------------------------------------------------------------------------*/
#define CONTROLLER_CTRL 0x64 /* W - command, R - status */
#define CONTROLLER_DATA 0x60 /* R/W - data */
/* commands to control the CONTROLLER (8042) on the mainboard */
#define CONTR_READ 0x20 /* read command byte from controller */
#define CONTR_WRITE 0x60 /* write command to controller, see below */
#define CONTR_SELFTEST 0xaa /* controller selftest, returns 0x55 when ok */
#define CONTR_IFTEST 0xab /* interface selftest */
#define CONTR_KBDISABL 0xad /* disable keyboard */
#define CONTR_KBENABL 0xae /* enable keyboard */
/* command byte for writing to CONTROLLER (8042) via CONTR_WRITE */
#define COMMAND_RES7 0x80 /* bit 7, reserved, always write a ZERO ! */
#define COMMAND_PCSCAN 0x40 /* bit 6, 1 = convert to pc scan codes */
#define COMMAND_RES5 0x20 /* bit 5, perhaps (!) use 9bit frame
* instead of 11 */
#define COMMAND_DISABL 0x10 /* bit 4, 1 = disable keyboard */
#define COMMAND_INHOVR 0x08 /* bit 3, 1 = override security lock inhibit */
#define COMMAND_SYSFLG 0x04 /* bit 2, value stored as "system flag" */
#define COMMAND_RES2 0x02 /* bit 1, reserved, always write a ZERO ! */
#define COMMAND_IRQEN 0x01 /* bit 0, 1 = enable output buffer full
* interrupt */
/* status from CONTROLLER (8042) on the mainboard */
#define STATUS_PARITY 0x80 /* bit 7, 1 = parity error on last byte */
#define STATUS_RXTIMO 0x40 /* bit 6, 1 = receive timeout error occured */
#define STATUS_TXTIMO 0x20 /* bit 5, 1 = transmit timeout error occured */
#define STATUS_ENABLE 0x10 /* bit 4, 1 = keyboard unlocked */
#define STATUS_WHAT 0x08 /* bit 3, 1 = wrote cmd to 0x64, 0 = wrote
* data to 0x60 */
#define STATUS_SYSFLG 0x04 /* bit 2, value stored as "system flag" */
#define STATUS_INPBF 0x02 /* bit 1, 1 = input buffer full (to 8042) */
#define STATUS_OUTPBF 0x01 /* bit 0, 1 = output buffer full (from 8042) */
/* commands to the KEYBOARD (via the 8042 controller on mainboard..) */
#define KEYB_C_RESET 0xff /* reset keyboard to power-on status */
#define KEYB_C_RESEND 0xfe /* resend last byte in case of error */
#define KEYB_C_TYPEM 0xf3 /* set keyboard typematic rate/delay */
#define KEYB_C_ID 0xf2 /* return keyboard id */
#define KEYB_C_ECHO 0xee /* diagnostic, echo 0xee */
#define KEYB_C_LEDS 0xed /* set/reset numlock,capslock & scroll lock */
/* responses from the KEYBOARD (via the 8042 controller on mainboard..) */
#define KEYB_R_OVERRUN0 0x00 /* keyboard buffer overflow */
#define KEYB_R_SELFOK 0xaa /* keyboard selftest ok after KEYB_C_RESET */
#define KEYB_R_EXT0 0xe0 /* keyboard extended scancode prefix 1 */
#define KEYB_R_EXT1 0xe1 /* keyboard extended scancode prefix 2 */
#define KEYB_R_ECHO 0xee /* keyboard response to KEYB_C_ECHO */
#define KEYB_R_BREAKPFX 0xf0 /* break code prefix for set 2 and 3 */
#define KEYB_R_ACK 0xfa /* acknowledge after a command has rx'd */
#define KEYB_R_SELFBAD 0xfc /*keyboard selftest FAILED after KEYB_C_RESET*/
#define KEYB_R_DIAGBAD 0xfd /* keyboard self diagnostic failure */
#define KEYB_R_RESEND 0xfe /* keyboard wants command resent or illegal
* command rx'd */
#define KEYB_R_OVERRUN1 0xff /* keyboard buffer overflow */
#define KEYB_R_MF2ID1 0xab /* MF II Keyboard id-byte #1 */
#define KEYB_R_MF2ID2 0x41 /* MF II Keyboard id-byte #2 */
#define KEYB_R_MF2ID2HP 0x83 /* MF II Keyboard id-byte #2 from HP keybd's */
/* internal Keyboard Type */
#define KB_UNKNOWN 0 /* unknown keyboard type */
#define KB_AT 1 /* AT (84 keys) Keyboard */
#define KB_MFII 2 /* MF II (101/102 keys) Keyboard */
/*---------------------------------------------------------------------------*
* CMOS ram access to get the "Equipment Byte"
*---------------------------------------------------------------------------*/
#define RTC_EQUIPMENT 0x14 /* equipment byte in cmos ram */
#define EQ_EGAVGA 0 /* reserved (= ega/vga) */
#define EQ_40COLOR 1 /* display = 40 col color */
#define EQ_80COLOR 2 /* display = 80 col color */
#define EQ_80MONO 3 /* display = 80 col mono */
/*---------------------------------------------------------------------------*
* VT220 -> internal color conversion table fields
*---------------------------------------------------------------------------*/
#define VT_NORMAL 0x00 /* no attributes at all */
#define VT_BOLD 0x01 /* bold attribute */
#define VT_UNDER 0x02 /* underline attribute */
#define VT_BLINK 0x04 /* blink attribute */
#define VT_INVERSE 0x08 /* inverse attribute */
/*---------------------------------------------------------------------------*
* VGA GENERAL/EXTERNAL Registers (3BA or 3DA and 3CA, 3C2, 3CC)
*---------------------------------------------------------------------------*/
#define GN_MISCOUTR 0x3CC /* misc output register read */
#define GN_MISCOUTW 0x3C2 /* misc output register write */
#define GN_INPSTAT0 0x3C2 /* input status 0, r/o */
#define GN_INPSTAT1M 0x3BA /* input status 1, r/o, mono */
#define GN_INPSTAT1C 0x3DA /* input status 1, r/o, color */
#define GN_FEATR 0x3CA /* feature control, read */
#define GN_FEATWM 0x3BA /* feature control, write, mono */
#define GN_FEATWC 0x3DA /* feature control, write, color */
#define GN_VSUBSYS 0x3C3 /* video subsystem register r/w */
#define GN_DMCNTLM 0x3B8 /* display mode control, r/w, mono */
#define GN_DMCNTLC 0x3D8 /* display mode control, r/w, color */
#define GN_COLORSEL 0x3D9 /* color select register, w/o */
#define GN_HERCOMPAT 0x3BF /* Hercules compatibility reg, w/o */
/*---------------------------------------------------------------------------*
* VGA CRTC Registers (3B4 and 3B5 or 3D4 and 3D5)
*---------------------------------------------------------------------------*/
#define MONO_BASE 0x3B4 /* crtc index register address mono */
#define CGA_BASE 0x3D4 /* crtc index register address color */
#define CRTC_ADDR 0x00 /* index register */
#define CRTC_HTOTAL 0x00 /* horizontal total */
#define CRTC_HDISPLE 0x01 /* horizontal display end */
#define CRTC_HBLANKS 0x02 /* horizontal blank start */
#define CRTC_HBLANKE 0x03 /* horizontal blank end */
#define CRTC_HSYNCS 0x04 /* horizontal sync start */
#define CRTC_HSYNCE 0x05 /* horizontal sync end */
#define CRTC_VTOTAL 0x06 /* vertical total */
#define CRTC_OVERFLL 0x07 /* overflow low */
#define CRTC_IROWADDR 0x08 /* inital row address */
#define CRTC_MAXROW 0x09 /* maximum row address */
#define CRTC_CURSTART 0x0A /* cursor start row address */
#define CURSOR_ON_BIT 0x20 /* cursor on/off on mda/cga/vga */
#define CRTC_CUREND 0x0B /* cursor end row address */
#define CRTC_STARTADRH 0x0C /* linear start address mid */
#define CRTC_STARTADRL 0x0D /* linear start address low */
#define CRTC_CURSORH 0x0E /* cursor address mid */
#define CRTC_CURSORL 0x0F /* cursor address low */
#define CRTC_VSYNCS 0x10 /* vertical sync start */
#define CRTC_VSYNCE 0x11 /* vertical sync end */
#define CRTC_VDE 0x12 /* vertical display end */
#define CRTC_OFFSET 0x13 /* row offset */
#define CRTC_ULOC 0x14 /* underline row address */
#define CRTC_VBSTART 0x15 /* vertical blank start */
#define CRTC_VBEND 0x16 /* vertical blank end */
#define CRTC_MODE 0x17 /* CRTC mode register */
#define CRTC_SPLITL 0x18 /* split screen start low */
/* start of ET4000 extensions */
#define CRTC_RASCAS 0x32 /* ras/cas configuration */
#define CRTC_EXTSTART 0x33 /* extended start address */
#define CRTC_COMPAT6845 0x34 /* 6845 comatibility control */
#define CRTC_OVFLHIGH 0x35 /* overflow high */
#define CRTC_SYSCONF1 0x36 /* video system configuration 1 */
#define CRTC_SYSCONF2 0x36 /* video system configuration 2 */
/* start of WD/Paradise extensions */
#define CRTC_PR10 0x29 /* r/w unlocking */
#define CRTC_PR11 0x2A /* ega switches */
#define CRTC_PR12 0x2B /* scratch pad */
#define CRTC_PR13 0x2C /* interlace h/2 start */
#define CRTC_PR14 0x2D /* interlace h/2 end */
#define CRTC_PR15 0x2E /* misc control #1 */
#define CRTC_PR16 0x2F /* misc control #2 */
#define CRTC_PR17 0x30 /* misc control #3 */
/* 0x31 .. 0x3f reserved */
/* Video 7 */
#define CRTC_V7ID 0x1f /* identification register */
/* Trident */
#define CRTC_MTEST 0x1e /* module test register */
#define CRTC_SOFTPROG 0x1f /* software programming */
#define CRTC_LATCHRDB 0x22 /* latch read back register */
#define CRTC_ATTRSRDB 0x24 /* attribute state read back register*/
#define CRTC_ATTRIRDB 0x26 /* attribute index read back register*/
#define CRTC_HOSTAR 0x27 /* high order start address register */
/*---------------------------------------------------------------------------*
* VGA TIMING & SEQUENCER Registers (3C4 and 3C5)
*---------------------------------------------------------------------------*/
#define TS_INDEX 0x3C4 /* index register */
#define TS_DATA 0x3C5 /* data register */
#define TS_SYNCRESET 0x00 /* synchronous reset */
#define TS_MODE 0x01 /* ts mode register */
#define TS_WRPLMASK 0x02 /* write plane mask */
#define TS_FONTSEL 0x03 /* font select register */
#define TS_MEMMODE 0x04 /* memory mode register */
/* ET4000 only */
#define TS_RESERVED 0x05 /* undef, reserved */
#define TS_STATECNTL 0x06 /* state control register */
#define TS_AUXMODE 0x07 /* auxiliary mode control */
/* WD/Paradise only */
#define TS_UNLOCKSEQ 0x06 /* PR20 - unlock sequencer register */
#define TS_DISCFSTAT 0x07 /* PR21 - display config status */
#define TS_MEMFIFOCTL 0x10 /* PR30 - memory i/f & fifo control */
#define TS_SYSIFCNTL 0x11 /* PR31 - system interface control */
#define TS_MISC4 0x12 /* PR32 - misc control #4 */
/* Video 7 */
#define TS_EXTCNTL 0x06 /* extensions control */
#define TS_CLRVDISP 0x30 /* clear vertical display 0x30-0x3f */
#define TS_V7CHIPREV 0x8e /* chipset revision 0x8e-0x8f */
#define TS_SWBANK 0xe8 /* single/write bank register, rev 5+*/
#define TS_RDBANK 0xe8 /* read bank register, rev 4+ */
#define TS_MISCCNTL 0xe8 /* misc control register, rev 4+ */
#define TS_SWSTROBE 0xea /* switch strobe */
#define TS_MWRCNTL 0xf3 /* masked write control */
#define TS_MWRMVRAM 0xf4 /* masked write mask VRAM only */
#define TS_BANKSEL 0xf6 /* bank select */
#define TS_SWREADB 0xf7 /* switch readback */
#define TS_PAGESEL 0xf9 /* page select */
#define TS_COMPAT 0xfc /* compatibility control */
#define TS_16BITCTL 0xff /* 16 bit interface control */
/* Trident */
#define TS_HWVERS 0x0b /* hardware version, switch old/new! */
#define TS_CONFPORT1 0x0c /* config port 1 and 2 - caution! */
#define TS_MODEC2 0x0d /* old/new mode control 2 - caution! */
#define TS_MODEC1 0x0e /* old/new mode control 1 - caution! */
#define TS_PUPM2 0x0f /* power up mode 2 */
/*---------------------------------------------------------------------------*
* VGA GRAPHICS DATA CONTROLLER Registers (3CE, 3CF and 3CD)
*---------------------------------------------------------------------------*/
#define GDC_SEGSEL 0x3CD /* segment select register */
#define GDC_INDEX 0x3CE /* index register */
#define GDC_DATA 0x3CF /* data register */
#define GDC_SETRES 0x00 /* set / reset bits */
#define GDC_ENSETRES 0x01 /* enable set / reset */
#define GDC_COLORCOMP 0x02 /* color compare register */
#define GDC_ROTFUNC 0x03 /* data rotate / function select */
#define GDC_RDPLANESEL 0x04 /* read plane select */
#define GDC_MODE 0x05 /* gdc mode register */
#define GDC_MISC 0x06 /* gdc misc register */
#define GDC_COLORCARE 0x07 /* color care register */
#define GDC_BITMASK 0x08 /* bit mask register */
/* WD/Paradise only */
#define GDC_BANKSWA 0x09 /* PR0A - bank switch a */
#define GDC_BANKSWB 0x0a /* PR0B - bank switch b */
#define GDC_MEMSIZE 0x0b /* PR1 memory size */
#define GDC_VIDEOSEL 0x0c /* PR2 video configuration */
#define GDC_CRTCNTL 0x0d /* PR3 crt address control */
#define GDC_VIDEOCNTL 0x0e /* PR4 video control */
#define GDC_PR5GPLOCK 0x0f /* PR5 gp status and lock */
/* Video 7 */
#define GDC_DATALATCH 0x22 /* gdc data latch */
/*---------------------------------------------------------------------------*
* VGA ATTRIBUTE CONTROLLER Registers (3C0 and 3C1)
*---------------------------------------------------------------------------*/
#define ATC_INDEX 0x3C0 /* index register AND */
#define ATC_DATAW 0x3C0 /* data write !!! */
#define ATC_DATAR 0x3C1 /* data read */
#define ATC_ACCESS 0x20 /* access bit in ATC index register */
#define ATC_PALETTE0 0x00 /* color palette register 0 */
#define ATC_PALETTE1 0x01 /* color palette register 1 */
#define ATC_PALETTE2 0x02 /* color palette register 2 */
#define ATC_PALETTE3 0x03 /* color palette register 3 */
#define ATC_PALETTE4 0x04 /* color palette register 4 */
#define ATC_PALETTE5 0x05 /* color palette register 5 */
#define ATC_PALETTE6 0x06 /* color palette register 6 */
#define ATC_PALETTE7 0x07 /* color palette register 7 */
#define ATC_PALETTE8 0x08 /* color palette register 8 */
#define ATC_PALETTE9 0x09 /* color palette register 9 */
#define ATC_PALETTEA 0x0A /* color palette register 10 */
#define ATC_PALETTEB 0x0B /* color palette register 11 */
#define ATC_PALETTEC 0x0C /* color palette register 12 */
#define ATC_PALETTED 0x0D /* color palette register 13 */
#define ATC_PALETTEE 0x0E /* color palette register 14 */
#define ATC_PALETTEF 0x0F /* color palette register 15 */
#define ATC_MODE 0x10 /* atc mode register */
#define ATC_OVERSCAN 0x11 /* overscan register */
#define ATC_COLPLEN 0x12 /* color plane enable register */
#define ATC_HORPIXPAN 0x13 /* horizontal pixel panning */
#define ATC_COLRESET 0x14 /* color reset */
#define ATC_MISC 0x16 /* misc register (ET3000/ET4000) */
/*---------------------------------------------------------------------------*
* VGA palette handling (output DAC palette)
*---------------------------------------------------------------------------*/
#define VGA_DAC 0x3C6 /* vga dac address */
#define VGA_PMSK 0x3F /* palette mask, 64 distinct values */
#define NVGAPEL 256 /* number of palette entries */
/*---------------------------------------------------------------------------*
* function key labels
*---------------------------------------------------------------------------*/
#define LABEL_LEN 9 /* length of one label */
#define LABEL_MID 8 /* mid-part (row/col) */
#define LABEL_ROWH ((4*LABEL_LEN)+1)
#define LABEL_ROWL ((4*LABEL_LEN)+2)
#define LABEL_COLU ((4*LABEL_LEN)+4)
#define LABEL_COLH ((4*LABEL_LEN)+5)
#define LABEL_COLL ((4*LABEL_LEN)+6)
/* tab setting */
#define MAXTAB 132 /* no of possible tab stops */
/* escape detection state machine */
#define STATE_INIT 0 /* normal */
#define STATE_ESC 1 /* got ESC */
#define STATE_HASH 2 /* got ESC # */
#define STATE_BROPN 3 /* got ESC ( */
#define STATE_BRCLO 4 /* got ESC ) */
#define STATE_CSI 5 /* got ESC [ */
#define STATE_CSIQM 6 /* got ESC [ ? */
#define STATE_AMPSND 7 /* got ESC & */
#define STATE_STAR 8 /* got ESC * */
#define STATE_PLUS 9 /* got ESC + */
#define STATE_DCS 10 /* got ESC P */
#define STATE_SCA 11 /* got ESC <Ps> " */
#define STATE_STR 12 /* got ESC ! */
#define STATE_MINUS 13 /* got ESC - */
#define STATE_DOT 14 /* got ESC . */
#define STATE_SLASH 15 /* got ESC / */
/* for storing escape sequence parameters */
#define MAXPARMS 10 /* maximum no of parms */
/* terminal responses */
#define DA_VT220 "\033[?62;1;2;6;7;8;9c"
/* sub-states for Device Control String processing */
#define DCS_INIT 0 /* got ESC P ... */
#define DCS_AND_UDK 1 /* got ESC P ... | */
#define DCS_UDK_DEF 2 /* got ESC P ... | fnckey / */
#define DCS_UDK_ESC 3 /* got ESC P ... | fnckey / ... ESC */
#define DCS_DLD_DSCS 4 /* got ESC P ... { */
#define DCS_DLD_DEF 5 /* got ESC P ... { dscs */
#define DCS_DLD_ESC 6 /* got ESC P ... { dscs ... / ... ESC */
/* vt220 user defined keys and vt220 downloadable charset */
#define MAXUDKDEF 300 /* max 256 char + 1 '\0' + space.. */
#define MAXUDKEYS 18 /* plus holes .. */
#define DSCS_LENGTH 3 /* descriptor length */
#define MAXSIXEL 8 /* sixels forever ! */
/* sub-states for HP-terminal emulator */
#define SHP_INIT 0
/* esc & f family */
#define SHP_AND_F 1
#define SHP_AND_Fa 2
#define SHP_AND_Fak 3
#define SHP_AND_Fak1 4
#define SHP_AND_Fakd 5
#define SHP_AND_FakdL 6
#define SHP_AND_FakdLl 7
#define SHP_AND_FakdLls 8
/* esc & j family */
#define SHP_AND_J 9
#define SHP_AND_JL 10
/* esc & every-thing-else */
#define SHP_AND_ETE 11
/* additionals for function key labels */
#define MAX_LABEL 16
#define MAX_STRING 80
#define MAX_STATUS 160
/* MAX values for screen sizes for possible video adaptors */
#define MAXROW_MDACGA 25 /* MDA/CGA can do 25 x 80 max */
#define MAXCOL_MDACGA 80
#define MAXROW_EGA 43 /* EGA can do 43 x 80 max */
#define MAXCOL_EGA 80
#define MAXROW_VGA 50 /* VGA can do 50 x 80 max */
#define MAXCOL_VGA 80
#define MAXCOL_SVGA 132 /* Super VGA can do 50 x 132 max */
/* switch 80/132 columns */
#define SCR_COL80 80 /* in 80 col mode */
#define SCR_COL132 132 /* in 132 col mode */
#define MAXDECSCA (((MAXCOL_SVGA * MAXROW_VGA) \
/ (8 * sizeof(unsigned int)) ) + 1 )
/* screen memory start, monochrome */
#ifndef MONO_BUF
# if PCVT_FREEBSD && (PCVT_FREEBSD > 102)
# define MONO_BUF (KERNBASE+0xB0000)
# else
# define MONO_BUF 0xfe0B0000 /* NetBSD-current: isa.h */
# endif
#endif
/* screen memory start, color */
#ifndef CGA_BUF
# if PCVT_FREEBSD && (PCVT_FREEBSD > 102)
# define CGA_BUF (KERNBASE+0xB8000)
# else
# define CGA_BUF 0xfe0B8000 /* NetBSD-current: isa.h */
# endif
#endif
#define CHR 2 /* bytes per word in screen mem */
#define NVGAFONTS 8 /* number of vga fonts loadable */
#define MAXKEYNUM 127 /* max no of keys in table */
/* charset tables */
#define CSL 0x0000 /* ega/vga charset, lower half of 512 */
#define CSH 0x0800 /* ega/vga charset, upper half of 512 */
#define CSSIZE 96 /* (physical) size of a character set */
/* charset designations */
#define D_G0 0 /* designated as G0 */
#define D_G1 1 /* designated as G1 */
#define D_G2 2 /* designated as G2 */
#define D_G3 3 /* designated as G3 */
#define D_G1_96 4 /* designated as G1 for 96-char charsets */
#define D_G2_96 5 /* designated as G2 for 96-char charsets */
#define D_G3_96 6 /* designated as G3 for 96-char charsets */
/* which fkey-labels */
#define SYS_FKL 0 /* in hp mode, sys-fkls are active */
#define USR_FKL 1 /* in hp mode, user-fkls are active */
/* variables */
#ifdef EXTERN
#define WAS_EXTERN
#else
#define EXTERN extern
#endif
EXTERN u_char *more_chars; /* response buffer via kbd */
EXTERN int char_count; /* response char count */
EXTERN u_char color; /* color or mono display */
EXTERN u_short kern_attr; /* kernel messages char attributes */
EXTERN u_short user_attr; /* character attributes */
#if !PCVT_EMU_MOUSE
#if PCVT_NETBSD
EXTERN struct tty *pc_tty[PCVT_NSCREENS];
#else
EXTERN struct tty pccons[PCVT_NSCREENS];
#endif /* PCVT_NETBSD */
#else /* PCVT_EMU_MOUSE */
#if PCVT_NETBSD
EXTERN struct tty *pc_tty[PCVT_NSCREENS + 1];
#else
EXTERN struct tty pccons[PCVT_NSCREENS + 1];
#endif
#endif /* PCVT_EMU_MOUSE */
struct sixels {
u_char lower[MAXSIXEL]; /* lower half of char */
u_char upper[MAXSIXEL]; /* upper half of char */
};
struct udkentry {
u_char first[MAXUDKEYS]; /* index to first char */
u_char length[MAXUDKEYS]; /* length of this entry */
};
/* VGA palette handling */
struct rgb {
u_char r, g, b; /* red/green/blue, valid 0..VGA_PMSK */
};
typedef struct video_state {
u_short *Crtat; /* video page start addr */
u_short *Memory; /* malloc'ed memory start address */
struct tty *vs_tty; /* pointer to this screen's tty */
u_char maxcol; /* 80 or 132 cols on screen */
u_char row, col; /* current cursor position */
u_short c_attr; /* current character attributes */
u_char vtsgr; /* current sgr configuration */
u_short cur_offset; /* current cursor position offset */
u_char bell_on; /* flag, bell enabled */
u_char sevenbit; /* flag, data path 7 bits wide */
u_char dis_fnc; /* flag, display functions enable */
u_char transparent; /* flag, make path temp transparent
* for ctrls */
u_char scrr_beg; /* scrolling region, begin */
u_char scrr_len; /* scrolling region, length */
u_char scrr_end; /* scrolling region, end */
u_char screen_rows; /* screen size, length (minus status
* lines) */
u_char screen_rowsize; /* screen size, length */
u_char vga_charset; /* VGA character set value */
u_char lastchar; /* flag, vt100 behaviour of last char
* on line */
u_char lastrow; /* save row, vt100 behaviour of last
* char on line */
u_char *report_chars; /* ptr, status reports from terminal */
u_char report_count; /* count, -"- */
u_char state; /* escape sequence state machine */
u_char m_awm; /* flag, vt100 mode, auto wrap */
u_char m_om; /* flag, vt100 mode, origin mode */
u_char sc_flag; /* flag, vt100 mode, saved parms
* valid */
u_char sc_row; /* saved row */
u_char sc_col; /* saved col */
u_short sc_cur_offset; /* saved cursor addr offset */
u_short sc_attr; /* saved attributes */
u_char sc_vtsgr; /* saved sgr configuration */
u_char sc_awm; /* saved auto wrap mode */
u_char sc_om; /* saved origin mode */
u_short *sc_G0; /* save G0 ptr */
u_short *sc_G1; /* save G1 ptr */
u_short *sc_G2; /* save G2 ptr */
u_short *sc_G3; /* save G3 ptr */
u_short *sc_GL; /* save GL ptr */
u_short *sc_GR; /* save GR ptr */
u_char sc_sel; /* selective erase state */
u_char ufkl[8][17]; /* user fkey-labels */
u_char sfkl[8][17]; /* system fkey-labels */
u_char labels_on; /* display fkey labels and status
* line on/off */
u_char which_fkl; /* which fkey labels are active */
char tab_stops[MAXTAB]; /* table of active tab stops */
u_char parmi; /* parameter index */
u_char parms[MAXPARMS]; /* parameter array */
u_char hp_state; /* hp escape sequence state machine */
u_char attribute; /* attribute normal, tx only, local */
u_char key; /* fkey label no */
u_char l_len; /* buffer length's */
u_char s_len;
u_char m_len;
u_char i; /* help (got short of names ...) */
u_char l_buf[MAX_LABEL+1]; /* buffers */
u_char s_buf[MAX_STRING+1];
u_char m_buf[MAX_STATUS+1];
u_char openf; /* we are opened ! */
u_char vt_pure_mode; /* no fkey labels, row/col, status */
u_char cursor_start; /* Start of cursor */
u_char cursor_end; /* End of cursor */
u_char cursor_on; /* cursor switched on */
u_char ckm; /* true = cursor key normal mode */
u_char irm; /* true = insert mode */
u_char lnm; /* Line Feed/New Line Mode */
u_char dcs_state; /* dcs escape sequence state machine */
u_char udk_def[MAXUDKDEF]; /* new definitions for vt220 FKeys */
u_char udk_defi; /* index for FKey definitions */
u_char udk_deflow; /* low or high nibble in sequence */
u_char udk_fnckey; /* function key to assign to */
u_char dld_dscs[DSCS_LENGTH]; /* designate soft character set id */
u_char dld_dscsi; /* index for dscs */
u_char dld_sixel_lower; /* upper/lower sixels of character */
u_char dld_sixelli; /* index for lower sixels */
u_char dld_sixelui; /* index for upper sixels */
struct sixels sixel; /* structure for storing char sixels */
u_char selchar; /* true = selective attribute on */
u_int decsca[MAXDECSCA]; /* Select Character Attrib bit array */
u_short *GL; /* ptr to current GL conversion table*/
u_short *GR; /* ptr to current GR conversion table*/
u_short *G0; /* ptr to current G0 conversion table*/
u_short *G1; /* ptr to current G1 conversion table*/
u_char force24; /* force 24 lines in DEC 25 and HP 28
* lines */
u_short *G2; /* ptr to current G2 conversion table*/
u_short *G3; /* ptr to current G3 conversion table*/
u_char dld_id[DSCS_LENGTH+1]; /* soft character set id */
u_char which[DSCS_LENGTH+1]; /* which set to designate */
u_char whichi; /* index into which .. */
u_char ss; /* flag, single shift G2 / G3 -> GL */
u_short *Gs; /* ptr to cur. G2/G3 conversion table*/
u_char udkbuf[MAXUDKDEF]; /* buffer for user defined keys */
struct udkentry ukt; /* index & length for each udk */
u_char udkff; /* index into buffer first free entry*/
struct rgb palette[NVGAPEL]; /* saved VGA DAC palette */
u_char wd132col; /* we are on a wd vga and in 132 col */
u_char scroll_lock; /* scroll lock active */
u_char caps_lock; /* caps lock active */
u_char shift_lock; /* shiftlock flag (virtual ..) */
u_char num_lock; /* num lock, true = keypad num mode */
#if PCVT_USL_VT_COMPAT /* SysV compatibility :-( */
struct vt_mode smode;
struct proc *proc;
pid_t pid;
unsigned vt_status;
#define VT_WAIT_REL 1 /* wait till process released vt */
#define VT_WAIT_ACK 2 /* wait till process ack vt acquire */
#define VT_GRAFX 4 /* vt runs graphics mode */
#define VT_WAIT_ACT 8 /* a process is sleeping on this vt */
/* becoming active */
#endif /* PCVT_USL_VT_COMPAT */
} video_state;
EXTERN video_state vs[PCVT_NSCREENS]; /* parameters for screens */
struct vga_char_state {
int loaded; /* Whether a font is loaded here */
int secondloaded; /* an extension characterset was loaded, */
/* the number is found here */
u_char char_scanlines; /* Scanlines per character */
u_char scr_scanlines; /* Low byte of scanlines per screen */
int screen_size; /* Screen size in SIZ_YYROWS */
};
EXTERN struct vga_char_state vgacs[NVGAFONTS]; /* Character set states */
#if PCVT_EMU_MOUSE
struct mousestat {
struct timeval lastmove; /* last time the pointer moved */
u_char opened; /* someone would like to use a mouse */
u_char minor; /* minor device number */
u_char buttons; /* current "buttons" pressed */
u_char extendedseen; /* 0xe0 has been seen, do not use next key */
u_char breakseen; /* key break has been seen for a sticky btn */
};
#endif /* PCVT_EMU_MOUSE */
#ifdef WAS_EXTERN
#if PCVT_NETBSD > 9
int pcprobe (struct device *, void *, void *);
void pcattach (struct device *, struct device *, void *);
struct cfdriver vtcd = {
NULL, "vt", pcprobe, pcattach, DV_TTY, sizeof(struct device)
};
#else
int pcprobe ( struct isa_device *dev );
int pcattach ( struct isa_device *dev );
struct isa_driver vtdriver = { /* driver routines */
pcprobe, pcattach, "vt",
};
#endif /* PCVT_NETBSD > 9 */
u_char fgansitopc[] = { /* foreground ANSI color -> pc */
FG_BLACK, FG_RED, FG_GREEN, FG_BROWN, FG_BLUE,
FG_MAGENTA, FG_CYAN, FG_LIGHTGREY
};
u_char bgansitopc[] = { /* background ANSI color -> pc */
BG_BLACK, BG_RED, BG_GREEN, BG_BROWN, BG_BLUE,
BG_MAGENTA, BG_CYAN, BG_LIGHTGREY
};
#if !PCVT_NETBSD
u_short *Crtat = (u_short *)MONO_BUF; /* screen start address */
struct tty *pcconsp = &pccons[0]; /* ptr to current device */
#else
struct tty *pcconsp; /* ptr to current device, see pcattach() */
#endif /* PCVT_NETBSD */
#if PCVT_EMU_MOUSE
struct mousestat mouse = {0};
struct mousedefs mousedef = {0x3b, 0x3c, 0x3d, 0, 250000};
#endif /* PCVT_EMU_MOUSE */ /* F1, F2, F3, false, 0.25 sec */
video_state *vsp = &vs[0]; /* ptr to current screen parms */
#if PCVT_USL_VT_COMPAT
int vt_switch_pending = 0; /* if > 0, a vt switch is */
#endif /* PCVT_USL_VT_COMPAT */ /* pending; contains the # */
/* of the old vt + 1 */
u_int addr_6845 = MONO_BASE; /* crtc base addr */
u_char do_initialization = 1; /* we have to init ourselves */
u_char shift_down = 0; /* shift key down flag */
u_char ctrl_down = 0; /* ctrl key down flag */
u_char meta_down = 0; /* alt key down flag */
u_char altgr_down = 0; /* altgr key down flag */
u_char kbrepflag = 1; /* key repeat flag */
u_char totalscreens = 1; /* screens available */
u_char current_video_screen = 0; /* displayed screen no */
u_char adaptor_type = UNKNOWN_ADAPTOR;/* adaptor type */
u_char vga_type = VGA_UNKNOWN; /* vga chipset */
u_char can_do_132col = 0; /* vga chipset can 132 cols */
u_char vga_family = 0; /* vga manufacturer */
u_char totalfonts = 0; /* fonts available */
u_char chargen_access = 0; /* synchronize access */
u_char keyboard_type = KB_UNKNOWN; /* type of keyboard */
u_char keyboard_is_initialized = 0; /* for ddb sanity */
u_char kbd_polling = 0; /* keyboard is being polled */
#if PCVT_SHOWKEYS
u_char keyboard_show = 0; /* normal display */
#endif /* PCVT_SHOWKEYS */
u_char cursor_pos_valid = 0; /* sput left a valid position*/
u_char critical_scroll = 0; /* inside scrolling up */
int switch_page = -1; /* which page to switch to */
#if PCVT_SCREENSAVER
u_char reset_screen_saver = 1; /* reset the saver next time */
u_char scrnsv_active = 0; /* active flag */
#endif /* PCVT_SCREENSAVER */
#ifdef XSERVER
unsigned scrnsv_timeout = 0; /* initially off */
#if !PCVT_USL_VT_COMPAT
u_char pcvt_xmode = 0; /* display is grafx */
#endif /* PCVT_USL_VT_COMPAT */
u_char pcvt_kbd_raw = 0; /* keyboard sends scans */
#endif /* XSERVER */
#if PCVT_BACKUP_FONTS
u_char *saved_charsets[NVGAFONTS] = {0}; /* backup copy of fonts */
#endif /* PCVT_BACKUP_FONTS */
/*---------------------------------------------------------------------------
VT220 attributes -> internal emulator attributes conversion tables
be careful when designing color combinations, because on
EGA and VGA displays, bit 3 of the attribute byte is used
for characterset switching, and is no longer available for
foreground intensity (bold)!
---------------------------------------------------------------------------*/
/* color displays */
u_char sgr_tab_color[16] = {
/*00*/ (BG_BLACK | FG_LIGHTGREY), /* normal */
/*01*/ (BG_BLUE | FG_LIGHTGREY), /* bold */
/*02*/ (BG_BROWN | FG_LIGHTGREY), /* underline */
/*03*/ (BG_MAGENTA | FG_LIGHTGREY), /* bold+underline */
/*04*/ (BG_BLACK | FG_LIGHTGREY | FG_BLINK), /* blink */
/*05*/ (BG_BLUE | FG_LIGHTGREY | FG_BLINK), /* bold+blink */
/*06*/ (BG_BROWN | FG_LIGHTGREY | FG_BLINK), /* underline+blink */
/*07*/ (BG_MAGENTA | FG_LIGHTGREY | FG_BLINK), /* bold+underline+blink */
/*08*/ (BG_LIGHTGREY | FG_BLACK), /* invers */
/*09*/ (BG_LIGHTGREY | FG_BLUE), /* bold+invers */
/*10*/ (BG_LIGHTGREY | FG_BROWN), /* underline+invers */
/*11*/ (BG_LIGHTGREY | FG_MAGENTA), /* bold+underline+invers*/
/*12*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK), /* blink+invers */
/*13*/ (BG_LIGHTGREY | FG_BLUE | FG_BLINK), /* bold+blink+invers */
/*14*/ (BG_LIGHTGREY | FG_BROWN | FG_BLINK), /* underline+blink+invers*/
/*15*/ (BG_LIGHTGREY | FG_MAGENTA | FG_BLINK) /*bold+underl+blink+invers*/
};
/* monochrome displays (VGA version, no intensity) */
u_char sgr_tab_mono[16] = {
/*00*/ (BG_BLACK | FG_LIGHTGREY), /* normal */
/*01*/ (BG_BLACK | FG_UNDERLINE), /* bold */
/*02*/ (BG_BLACK | FG_UNDERLINE), /* underline */
/*03*/ (BG_BLACK | FG_UNDERLINE), /* bold+underline */
/*04*/ (BG_BLACK | FG_LIGHTGREY | FG_BLINK), /* blink */
/*05*/ (BG_BLACK | FG_UNDERLINE | FG_BLINK), /* bold+blink */
/*06*/ (BG_BLACK | FG_UNDERLINE | FG_BLINK), /* underline+blink */
/*07*/ (BG_BLACK | FG_UNDERLINE | FG_BLINK), /* bold+underline+blink */
/*08*/ (BG_LIGHTGREY | FG_BLACK), /* invers */
/*09*/ (BG_LIGHTGREY | FG_BLACK), /* bold+invers */
/*10*/ (BG_LIGHTGREY | FG_BLACK), /* underline+invers */
/*11*/ (BG_LIGHTGREY | FG_BLACK), /* bold+underline+invers*/
/*12*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK), /* blink+invers */
/*13*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK), /* bold+blink+invers */
/*14*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK), /* underline+blink+invers*/
/*15*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK) /*bold+underl+blink+invers*/
};
/* monochrome displays (MDA version, with intensity) */
u_char sgr_tab_imono[16] = {
/*00*/ (BG_BLACK | FG_LIGHTGREY), /* normal */
/*01*/ (BG_BLACK | FG_LIGHTGREY | FG_INTENSE), /* bold */
/*02*/ (BG_BLACK | FG_UNDERLINE), /* underline */
/*03*/ (BG_BLACK | FG_UNDERLINE | FG_INTENSE), /* bold+underline */
/*04*/ (BG_BLACK | FG_LIGHTGREY | FG_BLINK), /* blink */
/*05*/ (BG_BLACK | FG_LIGHTGREY | FG_INTENSE | FG_BLINK), /* bold+blink */
/*06*/ (BG_BLACK | FG_UNDERLINE | FG_BLINK), /* underline+blink */
/*07*/ (BG_BLACK | FG_UNDERLINE | FG_BLINK | FG_INTENSE), /* bold+underline+blink */
/*08*/ (BG_LIGHTGREY | FG_BLACK), /* invers */
/*09*/ (BG_LIGHTGREY | FG_BLACK | FG_INTENSE), /* bold+invers */
/*10*/ (BG_LIGHTGREY | FG_BLACK), /* underline+invers */
/*11*/ (BG_LIGHTGREY | FG_BLACK | FG_INTENSE), /* bold+underline+invers*/
/*12*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK), /* blink+invers */
/*13*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK | FG_INTENSE),/* bold+blink+invers*/
/*14*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK), /* underline+blink+invers*/
/*15*/ (BG_LIGHTGREY | FG_BLACK | FG_BLINK | FG_INTENSE) /* bold+underl+blink+invers */
};
#else /* WAS_EXTERN */
extern u_char vga_type;
extern struct tty *pcconsp;
extern video_state *vsp;
#if PCVT_EMU_MOUSE
extern struct mousestat mouse;
extern struct mousedefs mousedef;
#endif /* PCVT_EMU_MOUSE */
#if PCVT_USL_VT_COMPAT
extern int vt_switch_pending;
#endif /* PCVT_USL_VT_COMPAT */
extern u_int addr_6845;
extern u_short *Crtat;
extern struct isa_driver vtdriver;
extern u_char do_initialization;
extern u_char bgansitopc[];
extern u_char fgansitopc[];
extern u_char shift_down;
extern u_char ctrl_down;
extern u_char meta_down;
extern u_char altgr_down;
extern u_char kbrepflag;
extern u_char adaptor_type;
extern u_char current_video_screen;
extern u_char totalfonts;
extern u_char totalscreens;
extern u_char chargen_access;
extern u_char keyboard_type;
extern u_char can_do_132col;
extern u_char vga_family;
extern u_char keyboard_is_initialized;
extern u_char kbd_polling;
#if PCVT_SHOWKEYS
extern u_char keyboard_show;
#endif /* PCVT_SHOWKEYS */
u_char cursor_pos_valid;
u_char critical_scroll;
int switch_page;
#if PCVT_SCREENSAVER
u_char reset_screen_saver;
u_char scrnsv_active;
#endif /* PCVT_SCREENSAVER */
extern u_char sgr_tab_color[];
extern u_char sgr_tab_mono[];
extern u_char sgr_tab_imono[];
#ifdef XSERVER
extern unsigned scrnsv_timeout;
extern u_char pcvt_xmode;
extern u_char pcvt_kbd_raw;
#endif /* XSERVER */
#if PCVT_BACKUP_FONTS
extern u_char *saved_charsets[NVGAFONTS];
#endif /* PCVT_BACKUP_FONTS */
#endif /* WAS_EXTERN */
/*
* FreeBSD > 1.0.2 cleaned up the kernel definitions (with the aim of
* getting ANSI-clean). Since there has been a mixed usage of types like
* "dev_t" (actually some short) in prototyped and non-prototyped fasion,
* each of those types is declared as "int" within function prototypes
* (which is what the compiler would actually promote it to).
*
* The macros below are used to clarify which type a parameter ought to
* be, regardless of its actual promotion to "int".
*/
#define Dev_t int
#define U_short int
#define U_char int
extern void bcopyb(void *from, void *to, u_int length);
extern void fillw(U_short value, void *addr, u_int length);
int pcopen ( Dev_t dev, int flag, int mode, struct proc *p );
int pcclose ( Dev_t dev, int flag, int mode, struct proc *p );
int pcread ( Dev_t dev, struct uio *uio, int flag );
int pcwrite ( Dev_t dev, struct uio *uio, int flag );
int pcioctl ( Dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p );
int pcmmap ( Dev_t dev, int offset, int nprot );
int pcrint ( void );
int pcparam ( struct tty *tp, struct termios *t );
int pccnprobe ( struct consdev *cp );
int pccninit ( struct consdev *cp );
int pccnputc ( Dev_t dev, U_char c );
int pccngetc ( Dev_t dev );
#if PCVT_NETBSD
void pcstart ( struct tty *tp );
#else
void pcstart ( struct tty *tp );
void consinit ( void );
#endif /* PCVT_NETBSD */
#if PCVT_USL_VT_COMPAT
void switch_screen ( int n, int dontsave );
int usl_vt_ioctl (Dev_t dev, u_long cmd, caddr_t data, int flag,
struct proc *);
int vt_activate ( int newscreen );
int vgapage ( int n );
void get_usl_keymap( keymap_t *map );
#else
void vgapage ( int n );
#endif /* PCVT_USL_VT_COMPAT */
#if PCVT_EMU_MOUSE
int mouse_ioctl ( Dev_t dev, u_long cmd, caddr_t data );
#endif /* PCVT_EMU_MOUSE */
#if PCVT_SCREENSAVER
void pcvt_scrnsv_reset ( void );
#endif /* PCVT_SCREENSAVER */
#if PCVT_SCREENSAVER && defined(XSERVER)
void pcvt_set_scrnsv_tmo ( int );
#endif /* PCVT_SCREENSAVER && defined(XSERVER) */
#ifdef XSERVER
void vga_move_charset ( unsigned n, unsigned char *b, int save_it);
#endif /* XSERVER */
1994-05-05 15:28:27 +04:00
void async_update ( void *arg );
void clr_parms ( struct video_state *svsp );
void cons_highlight ( void );
void cons_normal ( void );
void dprintf ( unsigned flgs, const char *fmt, ... );
int egavga_test ( void );
void fkl_off ( struct video_state *svsp );
void fkl_on ( struct video_state *svsp );
void init_sfkl ( struct video_state *svsp );
void init_ufkl ( struct video_state *svsp );
int kbd_cmd ( int val );
void kbd_code_init ( void );
void kbd_code_init1 ( void );
int kbdioctl ( Dev_t dev, u_long cmd, caddr_t data, int flag );
void loadchar ( int fontset, int character, int char_scanlines,
u_char *char_table );
#if PCVT_NEEDPG
int pg ( char *p, int q, int r, int s, int t, int u, int v,
int w, int x, int y, int z );
#endif
void select_vga_charset ( int vga_charset );
void set_2ndcharset ( void );
void set_charset ( struct video_state *svsp, int curvgacs );
void set_emulation_mode ( struct video_state *svsp, int mode );
void set_screen_size ( struct video_state *svsp, int size );
u_char *sgetc ( int noblock );
void sixel_vga ( struct sixels *charsixel, u_char *charvga );
void sput ( u_char *s, U_char attrib, int len, int page );
void sw_cursor ( int onoff );
void sw_sfkl ( struct video_state *svsp );
void sw_ufkl ( struct video_state *svsp );
void swritefkl ( int num, u_char *string, struct video_state *svsp );
void toggl_awm ( struct video_state *svsp );
void toggl_bell ( struct video_state *svsp );
void toggl_columns ( struct video_state *svsp );
void toggl_dspf ( struct video_state *svsp );
void toggl_sevenbit ( struct video_state *svsp );
struct tty *get_pccons ( Dev_t dev );
void update_led ( void );
void vga10_vga10 ( u_char *invga, u_char *outvga );
void vga10_vga14 ( u_char *invga, u_char *outvga );
void vga10_vga16 ( u_char *invga, u_char *outvga );
void vga10_vga8 ( u_char *invga, u_char *outvga );
u_char vga_chipset ( void );
int vga_col ( struct video_state *svsp, int cols );
void vga_screen_off ( void );
void vga_screen_on ( void );
char *vga_string ( int number );
int vga_test ( void );
int vgaioctl ( Dev_t dev, u_long cmd, caddr_t data, int flag );
void vgapaletteio ( unsigned idx, struct rgb *val, int writeit );
void vt_aln ( struct video_state *svsp );
void vt_clearudk ( struct video_state *svsp );
void vt_clreol ( struct video_state *svsp );
void vt_clreos ( struct video_state *svsp );
void vt_clrtab ( struct video_state *svsp );
int vt_col ( struct video_state *svsp, int cols );
void vt_coldmalloc ( void );
void vt_cub ( struct video_state *svsp );
void vt_cud ( struct video_state *svsp );
void vt_cuf ( struct video_state *svsp );
void vt_curadr ( struct video_state *svsp );
void vt_cuu ( struct video_state *svsp );
void vt_da ( struct video_state *svsp );
void vt_dch ( struct video_state *svsp );
void vt_dcsentry ( U_char ch, struct video_state *svsp );
void vt_designate ( struct video_state *svsp);
void vt_dl ( struct video_state *svsp );
void vt_dld ( struct video_state *svsp );
void vt_dsr ( struct video_state *svsp );
void vt_ech ( struct video_state *svsp );
void vt_ic ( struct video_state *svsp );
void vt_il ( struct video_state *svsp );
void vt_ind ( struct video_state *svsp );
void vt_initsel ( struct video_state *svsp );
void vt_keyappl ( struct video_state *svsp );
void vt_keynum ( struct video_state *svsp );
void vt_mc ( struct video_state *svsp );
void vt_nel ( struct video_state *svsp );
void vt_rc ( struct video_state *svsp );
void vt_reqtparm ( struct video_state *svsp );
void vt_reset_ansi ( struct video_state *svsp );
void vt_reset_dec_priv_qm ( struct video_state *svsp );
void vt_ri ( struct video_state *svsp );
void vt_ris ( struct video_state *svsp );
void vt_sc ( struct video_state *svsp );
void vt_sca ( struct video_state *svsp );
void vt_sd ( struct video_state *svsp );
void vt_sed ( struct video_state *svsp );
void vt_sel ( struct video_state *svsp );
void vt_set_ansi ( struct video_state *svsp );
void vt_set_dec_priv_qm ( struct video_state *svsp );
void vt_sgr ( struct video_state *svsp );
void vt_stbm ( struct video_state *svsp );
void vt_str ( struct video_state *svsp );
void vt_su ( struct video_state *svsp );
void vt_tst ( struct video_state *svsp );
void vt_udk ( struct video_state *svsp );
/*---------------------------------- E O F ----------------------------------*/