NetBSD/sys/arch/sun3/dev/kd.c

314 lines
6.5 KiB
C
Raw Normal View History

/*
* Copyright (c) 1994 Gordon W. Ross
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the Author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Gordon W. Ross ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Header: /cvsroot/src/sys/arch/sun3/dev/kd.c,v 1.1 1994/05/04 05:27:50 gwr Exp $
*/
/*
* Keyboard/Display device.
*
* This driver exists simply to provide a tty device that
* the indirect console driver can point to.
* The kbd driver sends its input here.
* Output goes to the screen via PROM printf.
*/
#include <sys/param.h>
#include <sys/proc.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/file.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <machine/autoconf.h>
#include <machine/mon.h>
#include <dev/cons.h>
#define BURST 64
static int kdmatch(struct device *, struct cfdata *, void *);
static void kdattach(struct device *, struct device *, void *);
struct cfdriver kdcd = {
NULL, "kd", kdmatch, kdattach, DV_TTY,
sizeof(struct device), 0};
struct tty *kd_tty[1];
int kdopen(dev_t, int, int, struct proc *);
int kdclose(dev_t, int, int, struct proc *);
int kdread(dev_t, struct uio *, int);
int kdwrite(dev_t, struct uio *, int);
int kdioctl(dev_t, int, caddr_t, int, struct proc *);
static int kdparam(struct tty *, struct termios *);
static void kdstart(struct tty *);
static int
kdmatch(struct device *parent, struct cfdata *cf, void *aux)
{
/* XXX - Enforce unit zero? */
return 1;
}
static void
kdattach(parent, self, args)
struct device *parent;
struct device *self;
void *args;
{
int unit = self->dv_unit;
if (unit) {
printf(" not unit zero?\n");
return;
}
printf("\n");
kd_tty[0] = ttymalloc();
/* Tell keyboard module where to send read data. */
kbd_ascii(kd_tty[0]);
}
int
kdopen(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
int unit;
struct tty *tp;
unit = minor(dev);
if (unit) return ENXIO;
tp = kd_tty[unit];
if (tp == NULL)
return ENXIO;
tp->t_oproc = kdstart;
tp->t_param = kdparam;
tp->t_dev = dev;
if ((tp->t_state & TS_ISOPEN) == 0) {
tp->t_state |= TS_WOPEN;
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_cflag = TTYDEF_CFLAG;
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
kdparam(tp, &tp->t_termios);
ttsetwater(tp);
} else if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0)
return EBUSY;
tp->t_state |= TS_CARR_ON;
return ((*linesw[tp->t_line].l_open)(dev, tp));
}
int
kdclose(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
int unit = minor(dev);
struct tty *tp = kd_tty[unit];
(*linesw[tp->t_line].l_close)(tp, flag);
ttyclose(tp);
return (0);
}
int
kdread(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int unit = minor(dev);
struct tty *tp = kd_tty[unit];
return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}
int
kdwrite(dev, uio, flag)
dev_t dev;
struct uio *uio;
int flag;
{
int unit = minor(dev);
struct tty *tp = kd_tty[unit];
return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}
int
kdioctl(dev, cmd, data, flag, p)
dev_t dev;
int cmd;
caddr_t data;
int flag;
struct proc *p;
{
int error;
int unit = minor(dev);
struct tty *tp = kd_tty[unit];
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error >= 0)
return error;
error = ttioctl(tp, cmd, data, flag, p);
if (error >= 0)
return error;
/* Handle any ioctl commands specific to kbd/display. */
/* XXX - Send KB* ioctls to kbd module? */
/* XXX - Send FB* ioctls to fb module? */
return ENOTTY;
}
void
kdstart(tp)
struct tty *tp;
{
struct clist *cl;
int s, len;
u_char buf[BURST];
s = spltty();
if (tp->t_state & (TS_BUSY|TS_TTSTOP|TS_TIMEOUT))
goto out;
tp->t_state |= TS_BUSY;
cl = &tp->t_outq;
/*
* XXX - It might be nice to have our own fbputs() so
* we would not have to use the (slow) PROM printf.
*/
while ((len = q_to_b(cl, buf, BURST-1)) > 0) {
buf[len] = '\0';
(void) splhigh();
#if 0
/* XXX - Not yet. Not sure what args should be. */
(romVectorPtr->fbWriteStr)(buf);
#else
mon_printf("%s", buf);
#endif
(void) spltty();
}
tp->t_state &= ~TS_BUSY;
if (tp->t_state & TS_ASLEEP) {
tp->t_state &= ~TS_ASLEEP;
wakeup((caddr_t)cl);
}
selwakeup(&tp->t_wsel);
out:
splx(s);
}
static int
kdparam(tp, t)
struct tty *tp;
struct termios *t;
{
/* XXX - These are ignored... */
tp->t_ispeed = t->c_ispeed;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
return 0;
}
/*
* kd console support
*
* XXX - Using prom routines for now...
*/
extern int zscnprobe_kbd();
kdcnprobe(cp)
struct consdev *cp;
{
int maj;
/* locate the major number */
for (maj = 0; maj < nchrdev; maj++)
if (cdevsw[maj].d_open == kdopen)
break;
/* initialize required fields */
cp->cn_dev = makedev(maj, 0);
cp->cn_pri = zscnprobe_kbd();
}
kdcninit(cp)
struct consdev *cp;
{
mon_printf("console on kd0 (keyboard/display)\n");
}
kdcngetc(dev)
dev_t dev;
{
int c, s;
/* XXX - Does mon_may_getchar() require the NMI clock? */
s = splhigh();
do c = mon_may_getchar();
while (c < 0);
splx(s);
if (c == '\r')
c = '\n';
return (c);
}
kdcnputc(dev, c)
dev_t dev;
int c;
{
int s;
s = splhigh();
#if 0
/* XXX - Is this worth doing? */
(romVectorPtr->fbWriteChar)(c);
#else
mon_putchar(c);
#endif
splx(s);
}