Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/tests/lib/libc/sys/Makefile

120 lines
2.7 KiB
Makefile
Raw Normal View History

more tests
2018-08-21 13:38:09 +03:00
# $NetBSD: Makefile,v 1.53 2018/08/21 10:38:09 christos Exp $
test for sigqueue
2011-01-10 07:57:56 +03:00
MKMAN= no
.include <bsd.own.mk>
Add a simple test case to check executable mapping rights for mprotect(2). - provide an exec_prot_support() routine so $ARCH can indicate whether it supports execution protection or not, and skip test accordingly. - have a trivial 'return_one' shellcode to copy anywhere in a page, and call it. The decision to keep the assembly solution is mine, reasons are twofold: - all pure-C implementations cannot be controlled easily: bounds detection (beginning/end) of return_one is unpredictable, or requires the use of overkill solutions like libelf. Using dlsym(3) was a good proposal, however I can't use it to know the end address of the payload. It makes copying of the shellcode a bit more difficult: using a constant may be too small (code has not been entirely copied, and can lead to errors that can be erroneously detected as "test passed"), or too big (depending on where it is mapped in memory, copying past the end of the function may trigger SIGSEGV). - I have to ensure that the resulting assembly is the most compact possible, especially as it will be reused to test other parts of memory (stack, data, rodata, etc.). Only i386 and amd64 are implemented so far. Others will come in due time. FWIW, writing the exec_prot_support() callback and the return_one payload should be enough. Writing callback requires good knowledge of the platform, depending on chip revision, CPU, board, MMU... the protection level may vary. Current files are put under lib/libc/arch/* and lib/libc/common/. Feel free to move them around the tests/ tree. Keep in mind that the common/ and arch/ code will be used outside of libc, so please do not hide them too deep in the tree. I checked a few architectures via build.sh cross-compile, and will keep an eye on buildbot for potential build breakage. Feel free to contact me in case you see any, of course.
2011-07-19 03:16:08 +04:00
.include "../arch/Makefile.exec_prot"
test for sigqueue
2011-01-10 07:57:56 +03:00
TESTSDIR= ${TESTSBASE}/lib/libc/sys
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_access
New test program for bind(2), with a single (currently eroneously failing) test case from Tyler Retzlaff.
2015-04-05 09:36:52 +03:00
TESTS_C+= t_bind
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_chroot
Move the clock_gettime(2) timer test to the right place.
2011-10-15 10:42:16 +04:00
TESTS_C+= t_clock_gettime
New clock_nanosleep(2) testcase.
2016-11-11 18:30:44 +03:00
TESTS_C+= t_clock_nanosleep
Continuing the (re)organization of the lib/libc atf regression tests
2011-01-13 05:40:43 +03:00
TESTS_C+= t_clone
Move connect(2), listen(2) and socketpair(2) tests to the right place.
2011-11-05 22:19:01 +04:00
TESTS_C+= t_connect
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_dup
Add new ATF tests: t_fork and t_vfork Test behavior of raise(signal) in either fork(2)ed or vfork(2)ed child. Tests: - raise1 SIGKILL - raise2 SIGSTOP - raise3 SIGTSTP - raise4 SIGTTIN - raise5 SIGTTOU - raise6 SIGABRT - raise7 SIGHUP - raise8 SIGCONT t_vfork:raise2 fails ignoring non-maskable SIGSTOP. The remaining ones pass. Sponsored by <The NetBSD Foundation>
2018-05-18 09:39:58 +03:00
TESTS_C+= t_fork
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_fsync
Remove 't_cerror' (this is tested by numerous individual tests). Rename 't_context' to 't_getcontext' for consistency.
2011-07-07 11:06:21 +04:00
TESTS_C+= t_getcontext
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_getgroups
TESTS_C+= t_getitimer
TESTS_C+= t_getlogin
TESTS_C+= t_getpid
TESTS_C+= t_getrusage
TESTS_C+= t_getsid
New getsockname(2) testcase for UNIX domain sockets.
2016-07-30 14:03:54 +03:00
TESTS_C+= t_getsockname
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_gettimeofday
TESTS_C+= t_issetugid
Add a test for PR/45618: Motoyuki OHMORI: kqueue EVFILT_TIMER with smaller timeout value makes kernel busy or panic
2011-11-17 05:14:12 +04:00
TESTS_C+= t_kevent
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_kill
TESTS_C+= t_link
Move connect(2), listen(2) and socketpair(2) tests to the right place.
2011-11-05 22:19:01 +04:00
TESTS_C+= t_listen
Move the _lwp_ctl(2) preemption counter check to the right place.
2012-03-17 21:23:34 +04:00
TESTS_C+= t_lwp_ctl
Calling _lwp_create() with a bogus ucontext could trigger a kernel assertion failure (and thus a crash in DIAGNOSTIC kernels). Independently discovered by YAMAMOTO Takashi and Joel Sing. To avoid this, introduce a cpu_mcontext_validate() function and move all sanity checks from cpu_setmcontext() there. Also untangle the netbsd32 compat mess slightly and add a cpu_mcontext32_validate() cousin there. Add an exhaustive atf test case, based partly on code from Joel Sing. Should finally fix the remaining open part of PR kern/43903.
2012-05-21 18:15:16 +04:00
TESTS_C+= t_lwp_create
Add new minherit test.
2014-07-18 16:34:52 +04:00
TESTS_C+= t_minherit
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_mincore
Move the mkdir(2) test to the right place.
2011-10-15 10:26:33 +04:00
TESTS_C+= t_mkdir
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_mkfifo
TESTS_C+= t_mknod
Add few unit tests for mlock(2), including a case for PR kern/44788.
2012-04-20 16:11:29 +04:00
TESTS_C+= t_mlock
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_mmap
TESTS_C+= t_mprotect
Add 21 unit tests for the XSI message queues.
2011-11-05 11:45:40 +04:00
TESTS_C+= t_msgctl
TESTS_C+= t_msgget
TESTS_C+= t_msgrcv
TESTS_C+= t_msgsnd
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_msync
TESTS_C+= t_nanosleep
Move the pipe(2) test to the right place.
2011-10-15 10:17:02 +04:00
TESTS_C+= t_pipe
Move all pipe2 tests to a separate file.
2011-10-31 19:41:31 +04:00
TESTS_C+= t_pipe2
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_poll
PR/49617: Kirk Russell: posix_fallocate() should be returning an error on failure, without setting errno.
2015-02-01 02:06:57 +03:00
TESTS_C+= t_posix_fallocate
Import ptrace(2) tests into appropriate directory tests/lib/libc/sys/ This is the correct directory documented in tests/README for such tests. Discussed with <martin> Sponsored by <The NetBSD Foundation>
2017-04-03 00:44:00 +03:00
TESTS_C+= t_ptrace
TESTS_C+= t_ptrace_wait
TESTS_C+= t_ptrace_wait3
TESTS_C+= t_ptrace_wait4
TESTS_C+= t_ptrace_wait6
TESTS_C+= t_ptrace_waitid
TESTS_C+= t_ptrace_waitpid
tests for recvmmsg
2012-06-22 22:45:23 +04:00
TESTS_C+= t_recvmmsg
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_revoke
TESTS_C+= t_select
more tests
2018-08-21 13:38:09 +03:00
TESTS_C+= t_sendmmsg
TESTS_C+= t_sendrecv
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_setrlimit
TESTS_C+= t_setuid
Move the sigaction(2) test to the right place.
2011-10-15 11:00:48 +04:00
TESTS_C+= t_sigaction
Make sure we build all of thests, not just the last one (use += vs =)
2011-01-13 06:09:54 +03:00
TESTS_C+= t_sigqueue
Rename testprogram and make it more general by adding other testcases. One commented out, I didn't manage to get all signal handling correct for now.
2013-03-08 21:01:54 +04:00
TESTS_C+= t_sigtimedwait
Move connect(2), listen(2) and socketpair(2) tests to the right place.
2011-11-05 22:19:01 +04:00
TESTS_C+= t_socketpair
setcontext() used to be incompatible with -lpthread since it affected the TLS pointer, therefore wrecking the pthread environement. Some ports had _UC_TLSBASE flag or equivalent (_UC_UNIQUE on alpha) that controlled whether setcontext() would change the TLS pointer. This change let libpthread override setcontext() with its own version that unsets _UC_TLSBASE, enabling safe usage of setcontext() with -lpthread. We also have the following required changes here: - rename alpha's _UC_UNIQUE into _UC_TLSBASE - add _UC_TLSBASE definition in header file for all ports (powerpc, sh3, sparc and sparc64 lack the implementation for now) - introduce a libc stub that can be overriden for setcontext() - modify MD libcs swapcontext() implementations so that they use the setcontext() libc stub instead of doing a plain system call. While we are there: - document various MD _UC_* flags in header file - add libc and libpthread tests for swapcontext() behavior (hopefully helpful to spot MD problems introduced with this change) Future work: - Deciding whether kernel support or _UC_TLSBASE should be added for powerpc, sh3, sparc and sparc64 is left to portmasters sparc64 Approved by core@
2012-09-12 06:00:51 +04:00
TESTS_C+= t_swapcontext
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_stat
Add a test to verify syscall() and/or __syscall() are working. This used to trigger a panic (see PR kern/53261) on arm.
2018-05-25 18:42:30 +03:00
TESTS_C+= t_syscall
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_timer_create
TESTS_C+= t_truncate
Move the ucontext(2) test to the right place.
2011-10-15 10:54:52 +04:00
TESTS_C+= t_ucontext
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
TESTS_C+= t_umask
TESTS_C+= t_unlink
Add new ATF tests: t_fork and t_vfork Test behavior of raise(signal) in either fork(2)ed or vfork(2)ed child. Tests: - raise1 SIGKILL - raise2 SIGSTOP - raise3 SIGTSTP - raise4 SIGTTIN - raise5 SIGTTOU - raise6 SIGABRT - raise7 SIGHUP - raise8 SIGCONT t_vfork:raise2 fails ignoring non-maskable SIGSTOP. The remaining ones pass. Sponsored by <The NetBSD Foundation>
2018-05-18 09:39:58 +03:00
TESTS_C+= t_vfork
Add wait6(2) tests.
2016-04-06 03:45:53 +03:00
TESTS_C+= t_wait
Add new tests: tests/lib/libc/sys/t_wait_noproc and t_wait_noproc_wnohang The t_wait_noproc test checks whether wait(2)-family of functions return error and set ECHILD for lack of childs. The t_wait_noproc_wnohang adds to options (except wait(2), wait3(2)) new parameter WNOHANG and verifies that error is still signaled and errno set to ECHILD. Currently t_wait_noproc_wnohang reports failures, these have been marked as expected and referenced to PR standards/51606. The problem report is authored by Robert Elz, and the initial regression has been notified by Nicolas Joly. Remove redundant test in tests/lib/libc/sys/t_wait for wait6(2) with no WNOHANG specified. Sponsored by <The NetBSD Foundation>.
2016-11-06 18:03:30 +03:00
TESTS_C+= t_wait_noproc
TESTS_C+= t_wait_noproc_wnohang
Move the writev(2) test to the right place.
2011-10-15 10:50:52 +04:00
TESTS_C+= t_write
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
Add a simple test case to check executable mapping rights for mprotect(2). - provide an exec_prot_support() routine so $ARCH can indicate whether it supports execution protection or not, and skip test accordingly. - have a trivial 'return_one' shellcode to copy anywhere in a page, and call it. The decision to keep the assembly solution is mine, reasons are twofold: - all pure-C implementations cannot be controlled easily: bounds detection (beginning/end) of return_one is unpredictable, or requires the use of overkill solutions like libelf. Using dlsym(3) was a good proposal, however I can't use it to know the end address of the payload. It makes copying of the shellcode a bit more difficult: using a constant may be too small (code has not been entirely copied, and can lead to errors that can be erroneously detected as "test passed"), or too big (depending on where it is mapped in memory, copying past the end of the function may trigger SIGSEGV). - I have to ensure that the resulting assembly is the most compact possible, especially as it will be reused to test other parts of memory (stack, data, rodata, etc.). Only i386 and amd64 are implemented so far. Others will come in due time. FWIW, writing the exec_prot_support() callback and the return_one payload should be enough. Writing callback requires good knowledge of the platform, depending on chip revision, CPU, board, MMU... the protection level may vary. Current files are put under lib/libc/arch/* and lib/libc/common/. Feel free to move them around the tests/ tree. Keep in mind that the common/ and arch/ code will be used outside of libc, so please do not hide them too deep in the tree. I checked a few architectures via build.sh cross-compile, and will keep an eye on buildbot for potential build breakage. Feel free to contact me in case you see any, of course.
2011-07-19 03:16:08 +04:00
SRCS.t_mprotect= t_mprotect.c ${SRCS_EXEC_PROT}
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
LDADD.t_getpid+= -lpthread
Exclude tests that use rump
2012-08-08 17:57:05 +04:00
Don't build tests that depend on RUMP if BSD_MK_COMPAT_FILE is defined.
2015-06-22 03:05:23 +03:00
.if (${MKRUMP} != "no") && !defined(BSD_MK_COMPAT_FILE)
Define _KERNTYPES for things that need it.
2016-01-24 00:22:45 +03:00
CPPFLAGS.t_posix_fadvise.c += -D_KERNTYPES
Exclude tests that use rump
2012-08-08 17:57:05 +04:00
TESTS_C+= t_posix_fadvise
Fix static linking for the tests: -lrump is also used by -lrumpuser, so we also need -lrump after -lrumpuser. Fixes build for sun2.
2014-06-10 08:28:39 +04:00
LDADD.t_posix_fadvise+= -lrumpvfs -lrump -lrumpuser -lrump -lpthread
Exclude tests that use rump
2012-08-08 17:57:05 +04:00
.endif
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
Import ptrace(2) tests into appropriate directory tests/lib/libc/sys/ This is the correct directory documented in tests/README for such tests. Discussed with <martin> Sponsored by <The NetBSD Foundation>
2017-04-03 00:44:00 +03:00
CPPFLAGS.t_lwp_create.c += -D_KERNTYPES
CPPFLAGS.t_ptrace_wait.c += -D_KERNTYPES
CPPFLAGS.t_ptrace_wait3.c += -D_KERNTYPES
CPPFLAGS.t_ptrace_wait4.c += -D_KERNTYPES
CPPFLAGS.t_ptrace_wait6.c += -D_KERNTYPES
CPPFLAGS.t_ptrace_waitid.c += -D_KERNTYPES
CPPFLAGS.t_ptrace_waitpid.c += -D_KERNTYPES
Add new tests in lib/libc/sys/t_ucontext New tests: - ucontext_sp - ucontext_fp - ucontext_pc - ucontext_intrv They test respectively: - _UC_MACHINE_SP - _UC_MACHINE_FP - _UC_MACHINE_PC - _UC_MACHINE_INTRV These tests attempt to access and print the values from ucontext, without interpreting the values. This is a follow up of the _UC_MACHINE_FP() introduction. These tests use PRIxREGISTER, and require to be built with -D_KERNTYPES. Sponsored by <The NetBSD Foundation>
2018-02-25 17:27:07 +03:00
CPPFLAGS.t_ucontext.c += -D_KERNTYPES
t_lwp_create needs kernel types.
2016-01-24 18:11:08 +03:00
PR/51844: Ngie Cooper: use root-owned file created during build instead of /usr/bin/fpr
2017-01-13 23:03:51 +03:00
FILES= truncate_test.root_owned
Set FILESBUILD=yes to actually run the creation script for the file. Should fix the build by creating a file which install can then find.
2017-01-14 06:59:58 +03:00
FILESBUILD= yes
Restrict special mode/owner settings to truncate_test.root_owned; otherwise the Atffile will be generated unreadable for group/others as well.
2017-02-01 13:18:27 +03:00
FILESDIR_truncate_test.root_owned= ${TESTSDIR}
FILESMODE_truncate_test.root_owned= 0600
FILESOWNER_truncate_test.root_owned= root
FILESGRP_truncate_test.root_owned= wheel
PR/51844: Ngie Cooper: use root-owned file created during build instead of /usr/bin/fpr
2017-01-13 23:03:51 +03:00
CLEANFILES= truncate_test.root_owned
truncate_test.root_owned:
dd if=/dev/null bs=1 count=1 of=${.TARGET}
Add the syscall tests back. Couple of files and tests were also renamed for consistency. All of these now mimic the libc structure.
2011-07-07 10:57:53 +04:00
WARNS= 4
test for sigqueue
2011-01-10 07:57:56 +03:00
.include <bsd.test.mk>