NetBSD/sys/arch/i386/boot/start.S

391 lines
8.0 KiB
ArmAsm
Raw Normal View History

/* $NetBSD: start.S,v 1.14 1996/08/30 01:34:15 thorpej Exp $ */
1994-10-27 07:14:23 +03:00
1993-03-21 21:04:42 +03:00
/*
* Ported to boot 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*
* Mach Operating System
* Copyright (c) 1992, 1991 Carnegie Mellon University
* All Rights Reserved.
*
* Permission to use, copy, modify and distribute this software and its
* documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie Mellon
* the rights to redistribute these changes.
*/
/*
Copyright 1988, 1989, 1990, 1991, 1992
by Intel Corporation, Santa Clara, California.
All Rights Reserved
Permission to use, copy, modify, and distribute this software and
its documentation for any purpose and without fee is hereby
granted, provided that the above copyright notice appears in all
copies and that both the copyright notice and this permission notice
appear in supporting documentation, and that the name of Intel
not be used in advertising or publicity pertaining to distribution
of the software without specific, written prior permission.
INTEL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
IN NO EVENT SHALL INTEL BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <machine/asm.h>
#define addr32 .byte 0x67
#define data32 .byte 0x66
1993-03-21 21:04:42 +03:00
1994-02-04 09:07:31 +03:00
BOOTSEG = 0x0100 # boot will be loaded here (below 640K)
BOOTSTACK = 0xfffc # boot stack
1993-03-21 21:04:42 +03:00
SIGNATURE = 0xaa55
LOADSZ = 15 # size of unix boot
1993-03-21 21:04:42 +03:00
PARTSTART = 0x1be # starting address of partition table
NUMPART = 4 # number of partitions in partition table
PARTSZ = 16 # each partition table entry is 16 bytes
BSDPART = 0xA5 # value of boot_ind, means bootable partition
BOOTABLE = 0x80 # value of boot_ind, means bootable partition
.text
.globl start
1993-03-21 21:04:42 +03:00
ENTRY(boot1)
start:
# start (aka boot1) is loaded at 0x0:0x7c00 but we want 0x7c0:0
# ljmp to the next instruction to adjust %cs
1993-03-21 21:04:42 +03:00
data32
ljmp $0x7c0, $start1
1993-03-21 21:04:42 +03:00
start1:
1993-03-21 21:04:42 +03:00
# set up %ds
movl %cs, %ax
movl %ax, %ds
1993-03-21 21:04:42 +03:00
# set up %ss and %esp
data32
movl $BOOTSEG, %eax
movl %ax, %ss
1993-03-21 21:04:42 +03:00
data32
movl $BOOTSTACK, %esp
1993-03-21 21:04:42 +03:00
/*** set up %es, (where we will load boot2 to) ***/
movl %ax, %es
1993-03-21 21:04:42 +03:00
#ifdef SERIAL
# Initialize the serial port to 9600 baud, 8N1.
data32
pushl %edx
data32
movl $0x00e3, %eax
xorl %edx, %edx
int $0x14
data32
popl %edx
#endif /* SERIAL */
#ifdef DEBUG
1993-03-21 21:04:42 +03:00
data32
movl $one, %esi
1993-03-21 21:04:42 +03:00
data32
call message
#endif /* DEBUG */
1993-03-21 21:04:42 +03:00
# bootstrap passes us drive number in %dl
1993-03-21 21:04:42 +03:00
cmpb $0x80, %dl
data32
jae hd
1993-03-21 21:04:42 +03:00
fd:
# reset the disk system
#ifdef DEBUG
1993-03-21 21:04:42 +03:00
data32
movl $two, %esi
1993-03-21 21:04:42 +03:00
data32
call message
#endif /* DEBUG */
movb $0x00, %ah
1993-03-21 21:04:42 +03:00
int $0x13
#ifdef DEBUG
1993-03-21 21:04:42 +03:00
data32
movl $three, %esi
1993-03-21 21:04:42 +03:00
data32
call message
#endif /* DEBUG */
data32
movl $0x0001, %ecx # cyl 0, sector 1
movb $0x00, %dh # head
# XXX Override the drive number.
movb $0x00, %dl
data32
jmp load
1993-03-21 21:04:42 +03:00
hd: /**** load sector 0 into the BOOTSEG ****/
#ifdef DEBUG
1993-03-21 21:04:42 +03:00
data32
movl $four, %esi
1993-03-21 21:04:42 +03:00
data32
call message
#endif /* DEBUG */
1993-03-21 21:04:42 +03:00
data32
movl $0x0201, %eax
xorl %ebx, %ebx # %bx = 0
1993-03-21 21:04:42 +03:00
data32
movl $0x0001, %ecx
#ifdef DEBUG
1993-03-21 21:04:42 +03:00
data32
movl $five, %esi
1993-03-21 21:04:42 +03:00
data32
call message
#endif /* DEBUG */
1993-03-21 21:04:42 +03:00
data32
andl $0xff, %edx
/*mov $0x0080, %edx*/
int $0x13
data32
jb read_error
/***# find the first 386BSD partition *****/
1993-03-21 21:04:42 +03:00
data32
movl $PARTSTART, %ebx
1993-03-21 21:04:42 +03:00
data32
movl $NUMPART, %ecx
1993-03-21 21:04:42 +03:00
again:
addr32
1993-03-21 21:04:42 +03:00
movb %es:4(%ebx), %al
cmpb $BSDPART, %al
data32
je found
data32
addl $PARTSZ, %ebx
1993-03-21 21:04:42 +03:00
data32
loop again
data32
movl $enoboot, %esi
1993-03-21 21:04:42 +03:00
data32
jmp err_stop
/*
# BIOS call "INT 0x13 Function 0x2" to read sectors from disk into memory
# Call with %ah = 0x2
# %al = number of sectors
# %ch = cylinder
# %cl = sector
# %dh = head
# %dl = drive (0x80 for hard disk, 0x0 for floppy disk)
# %es:%bx = segment:offset of buffer
# Return:
# %al = 0x0 on success; err code on failure
*/
found:
addr32
1993-03-21 21:04:42 +03:00
movb %es:1(%ebx), %dh /* head */
addr32
movl %es:2(%ebx), %ecx /*sect, cyl (+ 2 bytes junk in top word) */
1993-03-21 21:04:42 +03:00
load:
movb $0x2, %ah /* function 2 */
movb $LOADSZ, %al /* number of blocks */
xorl %ebx, %ebx /* %bx = 0, put it at 0 in the BOOTSEG */
1993-03-21 21:04:42 +03:00
int $0x13
data32
jb read_error
# ljmp to the second stage boot loader (boot2).
# After ljmp, %cs is BOOTSEG and boot1 (512 bytes) will be used
# as an internal buffer "intbuf".
#ifdef DEBUG
1993-03-21 21:04:42 +03:00
data32
movl $six, %esi
1993-03-21 21:04:42 +03:00
data32
call message
#endif /* DEBUG */
1993-03-21 21:04:42 +03:00
data32
ljmp $BOOTSEG, $_C_LABEL(boot2)
1993-03-21 21:04:42 +03:00
#
# read_error
#
read_error:
data32
movl $eread, %esi
1993-03-21 21:04:42 +03:00
err_stop:
data32
call message
data32
jmp stop
#
# message: write the error message in %ds:%esi to console
#
message:
#ifndef SERIAL
/*
# BIOS call "INT 10H Function 0Eh" to write character to console
# Call with %ah = 0x0e
# %al = character
# %bh = page
# %bl = foreground color
*/
#else /* SERIAL */
/*
# BIOS call "INT 14H Function 01h" to write character to console
# Call with %ah = 0x01
# %al = character
# %dx = port number
*/
#endif /* SERIAL */
1993-03-21 21:04:42 +03:00
data32
pushl %eax
1993-03-21 21:04:42 +03:00
data32
pushl %ebx
1993-03-21 21:04:42 +03:00
data32
pushl %edx
1993-03-21 21:04:42 +03:00
nextb:
cld
1993-03-21 21:04:42 +03:00
lodsb # load a byte into %al
testb %al, %al
1993-03-21 21:04:42 +03:00
data32
jz done
#ifndef SERIAL
movb $0x0e, %ah
data32
movl $0x0001, %ebx
int $0x10
#else /* SERIAL */
movb $0x01, %ah
xorl %edx, %edx
int $0x14
#endif /* SERIAL */
1993-03-21 21:04:42 +03:00
data32
jmp nextb
1993-03-21 21:04:42 +03:00
done:
data32
popl %edx
1993-03-21 21:04:42 +03:00
data32
popl %ebx
1993-03-21 21:04:42 +03:00
data32
popl %eax
1993-03-21 21:04:42 +03:00
data32
ret
/* Conventional GDT indexes. */
BOOT_CS_INDEX = 3
BOOT_CS16_INDEX = 5
BOOT_DS_INDEX = 4
ENTRY(boot2)
data32
xorl %eax, %eax
movl %cs, %ax
movl %ax, %ds
movl %ax, %es
addr32
data32
movl %eax, _C_LABEL(ourseg)
data32
shll $4, %eax
/* fix up GDT entries for bootstrap */
#define FIXUP(gdt_index) \
addr32; \
movl %eax, _C_LABEL(Gdt)+(8*gdt_index)+2; /* actually movw %ax */ \
addr32; \
movb %bl, _C_LABEL(Gdt)+(8*gdt_index)+4
data32
shldl $16, %eax, %ebx
FIXUP(BOOT_CS_INDEX)
FIXUP(BOOT_CS16_INDEX)
FIXUP(BOOT_DS_INDEX)
/* fix up GDT pointer */
data32
addl $_C_LABEL(Gdt), %eax
addr32
data32
movl %eax, _C_LABEL(Gdtr)+2
/* change to protected mode */
data32
call _C_LABEL(real_to_prot)
/* clear the bss */
movl $_C_LABEL(edata), %edi
movl $_C_LABEL(end), %ecx
subl %edi, %ecx
subb %al, %al
rep
stosb
movzbl %dl, %edx /* discard head (%dh) and random high bits */
pushl %edx
call _C_LABEL(netbsd_boot)
stop:
cli
hlt
1993-03-21 21:04:42 +03:00
1993-03-21 21:04:42 +03:00
/* error messages */
#ifdef DEBUG
1994-02-04 08:44:20 +03:00
one: .asciz "1\r\n"
two: .asciz "2\r\n"
three: .asciz "3\r\n"
four: .asciz "4\r\n"
five: .asciz "5\r\n"
six: .asciz "6\r\n"
seven: .asciz "7\r\n"
#endif /* DEBUG */
1994-02-04 08:44:20 +03:00
eread: .asciz "Read error\r\n"
enoboot: .asciz "No bootable partition\r\n"
1993-03-21 21:04:42 +03:00
endofcode:
/* throw in a partition in case we are block0 as well */
/* flag, head, sec, cyl, typ, ehead, esect, ecyl, start, len */
. = _C_LABEL(boot1) + PARTSTART
.byte 0x0,0,0,0,0,0,0,0
.long 0,0
.byte 0x0,0,0,0,0,0,0,0
.long 0,0
.byte 0x0,0,0,0,0,0,0,0
.long 0,0
.byte BOOTABLE,0,1,0,BSDPART,255,255,255
.long 0,50000
1993-03-21 21:04:42 +03:00
/* the last 2 bytes in the sector 0 contain the signature */
. = _C_LABEL(boot1) + 0x1fe
.short SIGNATURE
. = _C_LABEL(boot1) + 0x200
.globl _disklabel
_disklabel:
. = _C_LABEL(boot1) + 0x400