2005-06-22 00:37:38 +04:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
|
|
* Software Foundation.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
2005-06-22 10:14:51 +04:00
|
|
|
#ifdef __FreeBSD__
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
__FBSDID("$FreeBSD: src/sys/net80211/ieee80211_crypto_tkip.c,v 1.10 2005/08/08 18:46:35 sam Exp $");
|
2005-06-22 10:14:51 +04:00
|
|
|
#endif
|
|
|
|
#ifdef __NetBSD__
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
__KERNEL_RCSID(0, "$NetBSD: ieee80211_crypto_tkip.c,v 1.4 2005/11/18 16:40:08 skrll Exp $");
|
2005-06-22 10:14:51 +04:00
|
|
|
#endif
|
2005-06-22 00:37:38 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* IEEE 802.11i TKIP crypto support.
|
|
|
|
*
|
|
|
|
* Part of this module is derived from similar code in the Host
|
|
|
|
* AP driver. The code is used with the consent of the author and
|
|
|
|
* it's license is included below.
|
|
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/mbuf.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/endian.h>
|
|
|
|
|
|
|
|
#include <sys/socket.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
|
|
|
|
static void *tkip_attach(struct ieee80211com *, struct ieee80211_key *);
|
|
|
|
static void tkip_detach(struct ieee80211_key *);
|
|
|
|
static int tkip_setkey(struct ieee80211_key *);
|
|
|
|
static int tkip_encap(struct ieee80211_key *, struct mbuf *m, u_int8_t keyid);
|
2005-07-27 02:52:47 +04:00
|
|
|
static int tkip_enmic(struct ieee80211_key *, struct mbuf *, int);
|
|
|
|
static int tkip_decap(struct ieee80211_key *, struct mbuf *, int);
|
|
|
|
static int tkip_demic(struct ieee80211_key *, struct mbuf *, int);
|
2005-06-22 00:37:38 +04:00
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
const struct ieee80211_cipher ieee80211_cipher_tkip = {
|
2005-06-22 00:37:38 +04:00
|
|
|
.ic_name = "TKIP",
|
|
|
|
.ic_cipher = IEEE80211_CIPHER_TKIP,
|
|
|
|
.ic_header = IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN +
|
|
|
|
IEEE80211_WEP_EXTIVLEN,
|
|
|
|
.ic_trailer = IEEE80211_WEP_CRCLEN,
|
|
|
|
.ic_miclen = IEEE80211_WEP_MICLEN,
|
|
|
|
.ic_attach = tkip_attach,
|
|
|
|
.ic_detach = tkip_detach,
|
|
|
|
.ic_setkey = tkip_setkey,
|
|
|
|
.ic_encap = tkip_encap,
|
|
|
|
.ic_decap = tkip_decap,
|
|
|
|
.ic_enmic = tkip_enmic,
|
|
|
|
.ic_demic = tkip_demic,
|
|
|
|
};
|
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
#define tkip ieee80211_cipher_tkip
|
|
|
|
|
2005-06-22 00:37:38 +04:00
|
|
|
typedef uint8_t u8;
|
|
|
|
typedef uint16_t u16;
|
|
|
|
typedef uint32_t __u32;
|
|
|
|
typedef uint32_t u32;
|
|
|
|
|
|
|
|
struct tkip_ctx {
|
|
|
|
struct ieee80211com *tc_ic; /* for diagnostics */
|
|
|
|
|
|
|
|
u16 tx_ttak[5];
|
|
|
|
int tx_phase1_done;
|
|
|
|
u8 tx_rc4key[16]; /* XXX for test module; make locals? */
|
|
|
|
|
|
|
|
u16 rx_ttak[5];
|
|
|
|
int rx_phase1_done;
|
|
|
|
u8 rx_rc4key[16]; /* XXX for test module; make locals? */
|
|
|
|
uint64_t rx_rsc; /* held until MIC verified */
|
|
|
|
};
|
|
|
|
|
|
|
|
static void michael_mic(struct tkip_ctx *, const u8 *key,
|
|
|
|
struct mbuf *m, u_int off, size_t data_len,
|
|
|
|
u8 mic[IEEE80211_WEP_MICLEN]);
|
|
|
|
static int tkip_encrypt(struct tkip_ctx *, struct ieee80211_key *,
|
|
|
|
struct mbuf *, int hdr_len);
|
|
|
|
static int tkip_decrypt(struct tkip_ctx *, struct ieee80211_key *,
|
|
|
|
struct mbuf *, int hdr_len);
|
|
|
|
|
|
|
|
static void *
|
|
|
|
tkip_attach(struct ieee80211com *ic, struct ieee80211_key *k)
|
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx;
|
|
|
|
|
|
|
|
MALLOC(ctx, struct tkip_ctx *, sizeof(struct tkip_ctx),
|
|
|
|
M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
|
|
if (ctx == NULL) {
|
|
|
|
ic->ic_stats.is_crypto_nomem++;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctx->tc_ic = ic;
|
|
|
|
return ctx;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
tkip_detach(struct ieee80211_key *k)
|
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx = k->wk_private;
|
|
|
|
|
|
|
|
FREE(ctx, M_DEVBUF);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
tkip_setkey(struct ieee80211_key *k)
|
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx = k->wk_private;
|
|
|
|
|
|
|
|
if (k->wk_keylen != (128/NBBY)) {
|
|
|
|
(void) ctx; /* XXX */
|
|
|
|
IEEE80211_DPRINTF(ctx->tc_ic, IEEE80211_MSG_CRYPTO,
|
|
|
|
"%s: Invalid key length %u, expecting %u\n",
|
|
|
|
__func__, k->wk_keylen, 128/NBBY);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
k->wk_keytsc = 1; /* TSC starts at 1 */
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add privacy headers and do any s/w encryption required.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
tkip_encap(struct ieee80211_key *k, struct mbuf *m, u_int8_t keyid)
|
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx = k->wk_private;
|
|
|
|
struct ieee80211com *ic = ctx->tc_ic;
|
|
|
|
u_int8_t *ivp;
|
|
|
|
int hdrlen;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Handle TKIP counter measures requirement.
|
|
|
|
*/
|
|
|
|
if (ic->ic_flags & IEEE80211_F_COUNTERM) {
|
|
|
|
#ifdef IEEE80211_DEBUG
|
|
|
|
struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
IEEE80211_DPRINTF(ic, IEEE80211_MSG_CRYPTO,
|
|
|
|
"[%s] Discard frame due to countermeasures (%s)\n",
|
|
|
|
ether_sprintf(wh->i_addr2), __func__);
|
|
|
|
ic->ic_stats.is_crypto_tkipcm++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
hdrlen = ieee80211_hdrspace(ic, mtod(m, void *));
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copy down 802.11 header and add the IV, KeyID, and ExtIV.
|
|
|
|
*/
|
|
|
|
M_PREPEND(m, tkip.ic_header, M_NOWAIT);
|
|
|
|
if (m == NULL)
|
|
|
|
return 0;
|
|
|
|
ivp = mtod(m, u_int8_t *);
|
|
|
|
memmove(ivp, ivp + tkip.ic_header, hdrlen);
|
|
|
|
ivp += hdrlen;
|
|
|
|
|
|
|
|
ivp[0] = k->wk_keytsc >> 8; /* TSC1 */
|
|
|
|
ivp[1] = (ivp[0] | 0x20) & 0x7f; /* WEP seed */
|
|
|
|
ivp[2] = k->wk_keytsc >> 0; /* TSC0 */
|
|
|
|
ivp[3] = keyid | IEEE80211_WEP_EXTIV; /* KeyID | ExtID */
|
|
|
|
ivp[4] = k->wk_keytsc >> 16; /* TSC2 */
|
|
|
|
ivp[5] = k->wk_keytsc >> 24; /* TSC3 */
|
|
|
|
ivp[6] = k->wk_keytsc >> 32; /* TSC4 */
|
|
|
|
ivp[7] = k->wk_keytsc >> 40; /* TSC5 */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Finally, do software encrypt if neeed.
|
|
|
|
*/
|
|
|
|
if (k->wk_flags & IEEE80211_KEY_SWCRYPT) {
|
|
|
|
if (!tkip_encrypt(ctx, k, m, hdrlen))
|
|
|
|
return 0;
|
|
|
|
/* NB: tkip_encrypt handles wk_keytsc */
|
|
|
|
} else
|
|
|
|
k->wk_keytsc++;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add MIC to the frame as needed.
|
|
|
|
*/
|
|
|
|
static int
|
2005-07-27 02:52:47 +04:00
|
|
|
tkip_enmic(struct ieee80211_key *k, struct mbuf *m, int force)
|
2005-06-22 00:37:38 +04:00
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx = k->wk_private;
|
|
|
|
|
2005-07-27 02:52:47 +04:00
|
|
|
if (force || (k->wk_flags & IEEE80211_KEY_SWMIC)) {
|
2005-06-22 00:37:38 +04:00
|
|
|
struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
struct ieee80211com *ic = ctx->tc_ic;
|
|
|
|
int hdrlen;
|
|
|
|
uint8_t mic[IEEE80211_WEP_MICLEN];
|
|
|
|
|
|
|
|
ic->ic_stats.is_crypto_tkipenmic++;
|
|
|
|
|
|
|
|
hdrlen = ieee80211_hdrspace(ic, wh);
|
|
|
|
|
|
|
|
michael_mic(ctx, k->wk_txmic,
|
|
|
|
m, hdrlen, m->m_pkthdr.len - hdrlen, mic);
|
|
|
|
return m_append(m, tkip.ic_miclen, mic);
|
|
|
|
}
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline uint64_t
|
|
|
|
READ_6(uint8_t b0, uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4, uint8_t b5)
|
|
|
|
{
|
|
|
|
uint32_t iv32 = (b0 << 0) | (b1 << 8) | (b2 << 16) | (b3 << 24);
|
|
|
|
uint16_t iv16 = (b4 << 0) | (b5 << 8);
|
|
|
|
return (((uint64_t)iv16) << 32) | iv32;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Validate and strip privacy headers (and trailer) for a
|
|
|
|
* received frame. If necessary, decrypt the frame using
|
|
|
|
* the specified key.
|
|
|
|
*/
|
|
|
|
static int
|
2005-07-27 02:52:47 +04:00
|
|
|
tkip_decap(struct ieee80211_key *k, struct mbuf *m, int hdrlen)
|
2005-06-22 00:37:38 +04:00
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx = k->wk_private;
|
|
|
|
struct ieee80211com *ic = ctx->tc_ic;
|
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
uint8_t *ivp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Header should have extended IV and sequence number;
|
|
|
|
* verify the former and validate the latter.
|
|
|
|
*/
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
ivp = mtod(m, uint8_t *) + hdrlen;
|
|
|
|
if ((ivp[IEEE80211_WEP_IVLEN] & IEEE80211_WEP_EXTIV) == 0) {
|
|
|
|
/*
|
|
|
|
* No extended IV; discard frame.
|
|
|
|
*/
|
|
|
|
IEEE80211_DPRINTF(ctx->tc_ic, IEEE80211_MSG_CRYPTO,
|
|
|
|
"[%s] missing ExtIV for TKIP cipher\n",
|
|
|
|
ether_sprintf(wh->i_addr2));
|
|
|
|
ctx->tc_ic->ic_stats.is_rx_tkipformat++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Handle TKIP counter measures requirement.
|
|
|
|
*/
|
|
|
|
if (ic->ic_flags & IEEE80211_F_COUNTERM) {
|
|
|
|
IEEE80211_DPRINTF(ic, IEEE80211_MSG_CRYPTO,
|
|
|
|
"[%s] discard frame due to countermeasures (%s)\n",
|
|
|
|
ether_sprintf(wh->i_addr2), __func__);
|
|
|
|
ic->ic_stats.is_crypto_tkipcm++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctx->rx_rsc = READ_6(ivp[2], ivp[0], ivp[4], ivp[5], ivp[6], ivp[7]);
|
|
|
|
if (ctx->rx_rsc <= k->wk_keyrsc) {
|
|
|
|
/*
|
|
|
|
* Replay violation; notify upper layer.
|
|
|
|
*/
|
|
|
|
ieee80211_notify_replay_failure(ctx->tc_ic, wh, k, ctx->rx_rsc);
|
|
|
|
ctx->tc_ic->ic_stats.is_rx_tkipreplay++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* NB: We can't update the rsc in the key until MIC is verified.
|
|
|
|
*
|
|
|
|
* We assume we are not preempted between doing the check above
|
|
|
|
* and updating wk_keyrsc when stripping the MIC in tkip_demic.
|
|
|
|
* Otherwise we might process another packet and discard it as
|
|
|
|
* a replay.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if the device handled the decrypt in hardware.
|
|
|
|
* If so we just strip the header; otherwise we need to
|
|
|
|
* handle the decrypt in software.
|
|
|
|
*/
|
|
|
|
if ((k->wk_flags & IEEE80211_KEY_SWCRYPT) &&
|
|
|
|
!tkip_decrypt(ctx, k, m, hdrlen))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copy up 802.11 header and strip crypto bits.
|
|
|
|
*/
|
|
|
|
memmove(mtod(m, uint8_t *) + tkip.ic_header, mtod(m, void *), hdrlen);
|
|
|
|
m_adj(m, tkip.ic_header);
|
|
|
|
m_adj(m, -tkip.ic_trailer);
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Verify and strip MIC from the frame.
|
|
|
|
*/
|
|
|
|
static int
|
2005-07-27 02:52:47 +04:00
|
|
|
tkip_demic(struct ieee80211_key *k, struct mbuf *m, int force)
|
2005-06-22 00:37:38 +04:00
|
|
|
{
|
|
|
|
struct tkip_ctx *ctx = k->wk_private;
|
|
|
|
|
2005-07-27 02:52:47 +04:00
|
|
|
if (force || (k->wk_flags & IEEE80211_KEY_SWMIC)) {
|
2005-06-22 00:37:38 +04:00
|
|
|
struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *);
|
2005-07-27 02:52:47 +04:00
|
|
|
struct ieee80211com *ic = ctx->tc_ic;
|
|
|
|
int hdrlen = ieee80211_hdrspace(ic, wh);
|
2005-06-22 00:37:38 +04:00
|
|
|
u8 mic[IEEE80211_WEP_MICLEN];
|
|
|
|
u8 mic0[IEEE80211_WEP_MICLEN];
|
|
|
|
|
2005-07-27 02:52:47 +04:00
|
|
|
ic->ic_stats.is_crypto_tkipdemic++;
|
2005-06-22 00:37:38 +04:00
|
|
|
|
|
|
|
michael_mic(ctx, k->wk_rxmic,
|
|
|
|
m, hdrlen, m->m_pkthdr.len - (hdrlen + tkip.ic_miclen),
|
|
|
|
mic);
|
|
|
|
m_copydata(m, m->m_pkthdr.len - tkip.ic_miclen,
|
|
|
|
tkip.ic_miclen, mic0);
|
|
|
|
if (memcmp(mic, mic0, tkip.ic_miclen)) {
|
|
|
|
/* NB: 802.11 layer handles statistic and debug msg */
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
ieee80211_notify_michael_failure(ic, wh,
|
|
|
|
k->wk_rxkeyix != IEEE80211_KEYIX_NONE ?
|
|
|
|
k->wk_rxkeyix : k->wk_keyix);
|
2005-06-22 00:37:38 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Strip MIC from the tail.
|
|
|
|
*/
|
|
|
|
m_adj(m, -tkip.ic_miclen);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ok to update rsc now that MIC has been verified.
|
|
|
|
*/
|
|
|
|
k->wk_keyrsc = ctx->rx_rsc;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Host AP crypt: host-based TKIP encryption implementation for Host AP driver
|
|
|
|
*
|
|
|
|
* Copyright (c) 2003-2004, Jouni Malinen <jkmaline@cc.hut.fi>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation. See README and COPYING for
|
|
|
|
* more details.
|
|
|
|
*
|
|
|
|
* Alternatively, this software may be distributed under the terms of BSD
|
|
|
|
* license.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static const __u32 crc32_table[256] = {
|
|
|
|
0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
|
|
|
|
0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
|
|
|
|
0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
|
|
|
|
0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
|
|
|
|
0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
|
|
|
|
0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
|
|
|
|
0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
|
|
|
|
0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
|
|
|
|
0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
|
|
|
|
0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
|
|
|
|
0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
|
|
|
|
0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
|
|
|
|
0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
|
|
|
|
0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
|
|
|
|
0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
|
|
|
|
0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
|
|
|
|
0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
|
|
|
|
0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
|
|
|
|
0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
|
|
|
|
0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
|
|
|
|
0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
|
|
|
|
0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
|
|
|
|
0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
|
|
|
|
0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
|
|
|
|
0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
|
|
|
|
0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
|
|
|
|
0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
|
|
|
|
0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
|
|
|
|
0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
|
|
|
|
0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
|
|
|
|
0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
|
|
|
|
0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
|
|
|
|
0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
|
|
|
|
0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
|
|
|
|
0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
|
|
|
|
0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
|
|
|
|
0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
|
|
|
|
0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
|
|
|
|
0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
|
|
|
|
0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
|
|
|
|
0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
|
|
|
|
0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
|
|
|
|
0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
|
|
|
|
0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
|
|
|
|
0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
|
|
|
|
0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
|
|
|
|
0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
|
|
|
|
0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
|
|
|
|
0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
|
|
|
|
0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
|
|
|
|
0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
|
|
|
|
0x2d02ef8dL
|
|
|
|
};
|
|
|
|
|
|
|
|
static __inline u16 RotR1(u16 val)
|
|
|
|
{
|
|
|
|
return (val >> 1) | (val << 15);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u8 Lo8(u16 val)
|
|
|
|
{
|
|
|
|
return val & 0xff;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u8 Hi8(u16 val)
|
|
|
|
{
|
|
|
|
return val >> 8;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u16 Lo16(u32 val)
|
|
|
|
{
|
|
|
|
return val & 0xffff;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u16 Hi16(u32 val)
|
|
|
|
{
|
|
|
|
return val >> 16;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u16 Mk16(u8 hi, u8 lo)
|
|
|
|
{
|
|
|
|
return lo | (((u16) hi) << 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u16 Mk16_le(const u16 *v)
|
|
|
|
{
|
|
|
|
return le16toh(*v);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const u16 Sbox[256] = {
|
|
|
|
0xC6A5, 0xF884, 0xEE99, 0xF68D, 0xFF0D, 0xD6BD, 0xDEB1, 0x9154,
|
|
|
|
0x6050, 0x0203, 0xCEA9, 0x567D, 0xE719, 0xB562, 0x4DE6, 0xEC9A,
|
|
|
|
0x8F45, 0x1F9D, 0x8940, 0xFA87, 0xEF15, 0xB2EB, 0x8EC9, 0xFB0B,
|
|
|
|
0x41EC, 0xB367, 0x5FFD, 0x45EA, 0x23BF, 0x53F7, 0xE496, 0x9B5B,
|
|
|
|
0x75C2, 0xE11C, 0x3DAE, 0x4C6A, 0x6C5A, 0x7E41, 0xF502, 0x834F,
|
|
|
|
0x685C, 0x51F4, 0xD134, 0xF908, 0xE293, 0xAB73, 0x6253, 0x2A3F,
|
|
|
|
0x080C, 0x9552, 0x4665, 0x9D5E, 0x3028, 0x37A1, 0x0A0F, 0x2FB5,
|
|
|
|
0x0E09, 0x2436, 0x1B9B, 0xDF3D, 0xCD26, 0x4E69, 0x7FCD, 0xEA9F,
|
|
|
|
0x121B, 0x1D9E, 0x5874, 0x342E, 0x362D, 0xDCB2, 0xB4EE, 0x5BFB,
|
|
|
|
0xA4F6, 0x764D, 0xB761, 0x7DCE, 0x527B, 0xDD3E, 0x5E71, 0x1397,
|
|
|
|
0xA6F5, 0xB968, 0x0000, 0xC12C, 0x4060, 0xE31F, 0x79C8, 0xB6ED,
|
|
|
|
0xD4BE, 0x8D46, 0x67D9, 0x724B, 0x94DE, 0x98D4, 0xB0E8, 0x854A,
|
|
|
|
0xBB6B, 0xC52A, 0x4FE5, 0xED16, 0x86C5, 0x9AD7, 0x6655, 0x1194,
|
|
|
|
0x8ACF, 0xE910, 0x0406, 0xFE81, 0xA0F0, 0x7844, 0x25BA, 0x4BE3,
|
|
|
|
0xA2F3, 0x5DFE, 0x80C0, 0x058A, 0x3FAD, 0x21BC, 0x7048, 0xF104,
|
|
|
|
0x63DF, 0x77C1, 0xAF75, 0x4263, 0x2030, 0xE51A, 0xFD0E, 0xBF6D,
|
|
|
|
0x814C, 0x1814, 0x2635, 0xC32F, 0xBEE1, 0x35A2, 0x88CC, 0x2E39,
|
|
|
|
0x9357, 0x55F2, 0xFC82, 0x7A47, 0xC8AC, 0xBAE7, 0x322B, 0xE695,
|
|
|
|
0xC0A0, 0x1998, 0x9ED1, 0xA37F, 0x4466, 0x547E, 0x3BAB, 0x0B83,
|
|
|
|
0x8CCA, 0xC729, 0x6BD3, 0x283C, 0xA779, 0xBCE2, 0x161D, 0xAD76,
|
|
|
|
0xDB3B, 0x6456, 0x744E, 0x141E, 0x92DB, 0x0C0A, 0x486C, 0xB8E4,
|
|
|
|
0x9F5D, 0xBD6E, 0x43EF, 0xC4A6, 0x39A8, 0x31A4, 0xD337, 0xF28B,
|
|
|
|
0xD532, 0x8B43, 0x6E59, 0xDAB7, 0x018C, 0xB164, 0x9CD2, 0x49E0,
|
|
|
|
0xD8B4, 0xACFA, 0xF307, 0xCF25, 0xCAAF, 0xF48E, 0x47E9, 0x1018,
|
|
|
|
0x6FD5, 0xF088, 0x4A6F, 0x5C72, 0x3824, 0x57F1, 0x73C7, 0x9751,
|
|
|
|
0xCB23, 0xA17C, 0xE89C, 0x3E21, 0x96DD, 0x61DC, 0x0D86, 0x0F85,
|
|
|
|
0xE090, 0x7C42, 0x71C4, 0xCCAA, 0x90D8, 0x0605, 0xF701, 0x1C12,
|
|
|
|
0xC2A3, 0x6A5F, 0xAEF9, 0x69D0, 0x1791, 0x9958, 0x3A27, 0x27B9,
|
|
|
|
0xD938, 0xEB13, 0x2BB3, 0x2233, 0xD2BB, 0xA970, 0x0789, 0x33A7,
|
|
|
|
0x2DB6, 0x3C22, 0x1592, 0xC920, 0x8749, 0xAAFF, 0x5078, 0xA57A,
|
|
|
|
0x038F, 0x59F8, 0x0980, 0x1A17, 0x65DA, 0xD731, 0x84C6, 0xD0B8,
|
|
|
|
0x82C3, 0x29B0, 0x5A77, 0x1E11, 0x7BCB, 0xA8FC, 0x6DD6, 0x2C3A,
|
|
|
|
};
|
|
|
|
|
|
|
|
static __inline u16 _S_(u16 v)
|
|
|
|
{
|
|
|
|
u16 t = Sbox[Hi8(v)];
|
|
|
|
return Sbox[Lo8(v)] ^ ((t << 8) | (t >> 8));
|
|
|
|
}
|
|
|
|
|
|
|
|
#define PHASE1_LOOP_COUNT 8
|
|
|
|
|
|
|
|
static void tkip_mixing_phase1(u16 *TTAK, const u8 *TK, const u8 *TA, u32 IV32)
|
|
|
|
{
|
|
|
|
int i, j;
|
|
|
|
|
|
|
|
/* Initialize the 80-bit TTAK from TSC (IV32) and TA[0..5] */
|
|
|
|
TTAK[0] = Lo16(IV32);
|
|
|
|
TTAK[1] = Hi16(IV32);
|
|
|
|
TTAK[2] = Mk16(TA[1], TA[0]);
|
|
|
|
TTAK[3] = Mk16(TA[3], TA[2]);
|
|
|
|
TTAK[4] = Mk16(TA[5], TA[4]);
|
|
|
|
|
|
|
|
for (i = 0; i < PHASE1_LOOP_COUNT; i++) {
|
|
|
|
j = 2 * (i & 1);
|
|
|
|
TTAK[0] += _S_(TTAK[4] ^ Mk16(TK[1 + j], TK[0 + j]));
|
|
|
|
TTAK[1] += _S_(TTAK[0] ^ Mk16(TK[5 + j], TK[4 + j]));
|
|
|
|
TTAK[2] += _S_(TTAK[1] ^ Mk16(TK[9 + j], TK[8 + j]));
|
|
|
|
TTAK[3] += _S_(TTAK[2] ^ Mk16(TK[13 + j], TK[12 + j]));
|
|
|
|
TTAK[4] += _S_(TTAK[3] ^ Mk16(TK[1 + j], TK[0 + j])) + i;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifndef _BYTE_ORDER
|
|
|
|
#error "Don't know native byte order"
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static void tkip_mixing_phase2(u8 *WEPSeed, const u8 *TK, const u16 *TTAK,
|
|
|
|
u16 IV16)
|
|
|
|
{
|
|
|
|
/* Make temporary area overlap WEP seed so that the final copy can be
|
|
|
|
* avoided on little endian hosts. */
|
|
|
|
u16 *PPK = (u16 *) &WEPSeed[4];
|
|
|
|
|
|
|
|
/* Step 1 - make copy of TTAK and bring in TSC */
|
|
|
|
PPK[0] = TTAK[0];
|
|
|
|
PPK[1] = TTAK[1];
|
|
|
|
PPK[2] = TTAK[2];
|
|
|
|
PPK[3] = TTAK[3];
|
|
|
|
PPK[4] = TTAK[4];
|
|
|
|
PPK[5] = TTAK[4] + IV16;
|
|
|
|
|
|
|
|
/* Step 2 - 96-bit bijective mixing using S-box */
|
|
|
|
PPK[0] += _S_(PPK[5] ^ Mk16_le((const u16 *) &TK[0]));
|
|
|
|
PPK[1] += _S_(PPK[0] ^ Mk16_le((const u16 *) &TK[2]));
|
|
|
|
PPK[2] += _S_(PPK[1] ^ Mk16_le((const u16 *) &TK[4]));
|
|
|
|
PPK[3] += _S_(PPK[2] ^ Mk16_le((const u16 *) &TK[6]));
|
|
|
|
PPK[4] += _S_(PPK[3] ^ Mk16_le((const u16 *) &TK[8]));
|
|
|
|
PPK[5] += _S_(PPK[4] ^ Mk16_le((const u16 *) &TK[10]));
|
|
|
|
|
|
|
|
PPK[0] += RotR1(PPK[5] ^ Mk16_le((const u16 *) &TK[12]));
|
|
|
|
PPK[1] += RotR1(PPK[0] ^ Mk16_le((const u16 *) &TK[14]));
|
|
|
|
PPK[2] += RotR1(PPK[1]);
|
|
|
|
PPK[3] += RotR1(PPK[2]);
|
|
|
|
PPK[4] += RotR1(PPK[3]);
|
|
|
|
PPK[5] += RotR1(PPK[4]);
|
|
|
|
|
|
|
|
/* Step 3 - bring in last of TK bits, assign 24-bit WEP IV value
|
|
|
|
* WEPSeed[0..2] is transmitted as WEP IV */
|
|
|
|
WEPSeed[0] = Hi8(IV16);
|
|
|
|
WEPSeed[1] = (Hi8(IV16) | 0x20) & 0x7F;
|
|
|
|
WEPSeed[2] = Lo8(IV16);
|
|
|
|
WEPSeed[3] = Lo8((PPK[5] ^ Mk16_le((const u16 *) &TK[0])) >> 1);
|
|
|
|
|
|
|
|
#if _BYTE_ORDER == _BIG_ENDIAN
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
|
|
PPK[i] = (PPK[i] << 8) | (PPK[i] >> 8);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
wep_encrypt(u8 *key, struct mbuf *m0, u_int off, size_t data_len,
|
|
|
|
uint8_t icv[IEEE80211_WEP_CRCLEN])
|
|
|
|
{
|
|
|
|
u32 i, j, k, crc;
|
|
|
|
size_t buflen;
|
|
|
|
u8 S[256];
|
|
|
|
u8 *pos;
|
|
|
|
struct mbuf *m;
|
|
|
|
#define S_SWAP(a,b) do { u8 t = S[a]; S[a] = S[b]; S[b] = t; } while(0)
|
|
|
|
|
|
|
|
/* Setup RC4 state */
|
|
|
|
for (i = 0; i < 256; i++)
|
|
|
|
S[i] = i;
|
|
|
|
j = 0;
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
|
|
j = (j + S[i] + key[i & 0x0f]) & 0xff;
|
|
|
|
S_SWAP(i, j);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Compute CRC32 over unencrypted data and apply RC4 to data */
|
|
|
|
crc = ~0;
|
|
|
|
i = j = 0;
|
|
|
|
m = m0;
|
|
|
|
pos = mtod(m, uint8_t *) + off;
|
|
|
|
buflen = m->m_len - off;
|
|
|
|
for (;;) {
|
|
|
|
if (buflen > data_len)
|
|
|
|
buflen = data_len;
|
|
|
|
data_len -= buflen;
|
|
|
|
for (k = 0; k < buflen; k++) {
|
|
|
|
crc = crc32_table[(crc ^ *pos) & 0xff] ^ (crc >> 8);
|
|
|
|
i = (i + 1) & 0xff;
|
|
|
|
j = (j + S[i]) & 0xff;
|
|
|
|
S_SWAP(i, j);
|
|
|
|
*pos++ ^= S[(S[i] + S[j]) & 0xff];
|
|
|
|
}
|
|
|
|
m = m->m_next;
|
|
|
|
if (m == NULL) {
|
2005-06-22 10:14:51 +04:00
|
|
|
IASSERT(data_len == 0,
|
2005-06-22 00:37:38 +04:00
|
|
|
("out of buffers with data_len %zu\n", data_len));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
pos = mtod(m, uint8_t *);
|
|
|
|
buflen = m->m_len;
|
|
|
|
}
|
|
|
|
crc = ~crc;
|
|
|
|
|
|
|
|
/* Append little-endian CRC32 and encrypt it to produce ICV */
|
|
|
|
icv[0] = crc;
|
|
|
|
icv[1] = crc >> 8;
|
|
|
|
icv[2] = crc >> 16;
|
|
|
|
icv[3] = crc >> 24;
|
|
|
|
for (k = 0; k < IEEE80211_WEP_CRCLEN; k++) {
|
|
|
|
i = (i + 1) & 0xff;
|
|
|
|
j = (j + S[i]) & 0xff;
|
|
|
|
S_SWAP(i, j);
|
|
|
|
icv[k] ^= S[(S[i] + S[j]) & 0xff];
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
wep_decrypt(u8 *key, struct mbuf *m, u_int off, size_t data_len)
|
|
|
|
{
|
|
|
|
u32 i, j, k, crc;
|
|
|
|
u8 S[256];
|
|
|
|
u8 *pos, icv[4];
|
|
|
|
size_t buflen;
|
|
|
|
|
|
|
|
/* Setup RC4 state */
|
|
|
|
for (i = 0; i < 256; i++)
|
|
|
|
S[i] = i;
|
|
|
|
j = 0;
|
|
|
|
for (i = 0; i < 256; i++) {
|
|
|
|
j = (j + S[i] + key[i & 0x0f]) & 0xff;
|
|
|
|
S_SWAP(i, j);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Apply RC4 to data and compute CRC32 over decrypted data */
|
|
|
|
crc = ~0;
|
|
|
|
i = j = 0;
|
|
|
|
pos = mtod(m, uint8_t *) + off;
|
|
|
|
buflen = m->m_len - off;
|
|
|
|
for (;;) {
|
|
|
|
if (buflen > data_len)
|
|
|
|
buflen = data_len;
|
|
|
|
data_len -= buflen;
|
|
|
|
for (k = 0; k < buflen; k++) {
|
|
|
|
i = (i + 1) & 0xff;
|
|
|
|
j = (j + S[i]) & 0xff;
|
|
|
|
S_SWAP(i, j);
|
|
|
|
*pos ^= S[(S[i] + S[j]) & 0xff];
|
|
|
|
crc = crc32_table[(crc ^ *pos) & 0xff] ^ (crc >> 8);
|
|
|
|
pos++;
|
|
|
|
}
|
|
|
|
m = m->m_next;
|
|
|
|
if (m == NULL) {
|
2005-06-22 10:14:51 +04:00
|
|
|
IASSERT(data_len == 0,
|
2005-06-22 00:37:38 +04:00
|
|
|
("out of buffers with data_len %zu\n", data_len));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
pos = mtod(m, uint8_t *);
|
|
|
|
buflen = m->m_len;
|
|
|
|
}
|
|
|
|
crc = ~crc;
|
|
|
|
|
|
|
|
/* Encrypt little-endian CRC32 and verify that it matches with the
|
|
|
|
* received ICV */
|
|
|
|
icv[0] = crc;
|
|
|
|
icv[1] = crc >> 8;
|
|
|
|
icv[2] = crc >> 16;
|
|
|
|
icv[3] = crc >> 24;
|
|
|
|
for (k = 0; k < 4; k++) {
|
|
|
|
i = (i + 1) & 0xff;
|
|
|
|
j = (j + S[i]) & 0xff;
|
|
|
|
S_SWAP(i, j);
|
|
|
|
if ((icv[k] ^ S[(S[i] + S[j]) & 0xff]) != *pos++) {
|
|
|
|
/* ICV mismatch - drop frame */
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static __inline u32 rotl(u32 val, int bits)
|
|
|
|
{
|
|
|
|
return (val << bits) | (val >> (32 - bits));
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static __inline u32 rotr(u32 val, int bits)
|
|
|
|
{
|
|
|
|
return (val >> bits) | (val << (32 - bits));
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static __inline u32 xswap(u32 val)
|
|
|
|
{
|
|
|
|
return ((val & 0x00ff00ff) << 8) | ((val & 0xff00ff00) >> 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#define michael_block(l, r) \
|
|
|
|
do { \
|
|
|
|
r ^= rotl(l, 17); \
|
|
|
|
l += r; \
|
|
|
|
r ^= xswap(l); \
|
|
|
|
l += r; \
|
|
|
|
r ^= rotl(l, 3); \
|
|
|
|
l += r; \
|
|
|
|
r ^= rotr(l, 2); \
|
|
|
|
l += r; \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
|
|
|
|
static __inline u32 get_le32_split(u8 b0, u8 b1, u8 b2, u8 b3)
|
|
|
|
{
|
|
|
|
return b0 | (b1 << 8) | (b2 << 16) | (b3 << 24);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline u32 get_le32(const u8 *p)
|
|
|
|
{
|
|
|
|
return get_le32_split(p[0], p[1], p[2], p[3]);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static __inline void put_le32(u8 *p, u32 v)
|
|
|
|
{
|
|
|
|
p[0] = v;
|
|
|
|
p[1] = v >> 8;
|
|
|
|
p[2] = v >> 16;
|
|
|
|
p[3] = v >> 24;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Craft pseudo header used to calculate the MIC.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
michael_mic_hdr(const struct ieee80211_frame *wh0, uint8_t hdr[16])
|
|
|
|
{
|
|
|
|
const struct ieee80211_frame_addr4 *wh =
|
|
|
|
(const struct ieee80211_frame_addr4 *) wh0;
|
|
|
|
|
|
|
|
switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) {
|
|
|
|
case IEEE80211_FC1_DIR_NODS:
|
|
|
|
IEEE80211_ADDR_COPY(hdr, wh->i_addr1); /* DA */
|
|
|
|
IEEE80211_ADDR_COPY(hdr + IEEE80211_ADDR_LEN, wh->i_addr2);
|
|
|
|
break;
|
|
|
|
case IEEE80211_FC1_DIR_TODS:
|
|
|
|
IEEE80211_ADDR_COPY(hdr, wh->i_addr3); /* DA */
|
|
|
|
IEEE80211_ADDR_COPY(hdr + IEEE80211_ADDR_LEN, wh->i_addr2);
|
|
|
|
break;
|
|
|
|
case IEEE80211_FC1_DIR_FROMDS:
|
|
|
|
IEEE80211_ADDR_COPY(hdr, wh->i_addr1); /* DA */
|
|
|
|
IEEE80211_ADDR_COPY(hdr + IEEE80211_ADDR_LEN, wh->i_addr3);
|
|
|
|
break;
|
|
|
|
case IEEE80211_FC1_DIR_DSTODS:
|
|
|
|
IEEE80211_ADDR_COPY(hdr, wh->i_addr3); /* DA */
|
|
|
|
IEEE80211_ADDR_COPY(hdr + IEEE80211_ADDR_LEN, wh->i_addr4);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) {
|
|
|
|
const struct ieee80211_qosframe *qwh =
|
|
|
|
(const struct ieee80211_qosframe *) wh;
|
|
|
|
hdr[12] = qwh->i_qos[0] & IEEE80211_QOS_TID;
|
|
|
|
} else
|
|
|
|
hdr[12] = 0;
|
|
|
|
hdr[13] = hdr[14] = hdr[15] = 0; /* reserved */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
michael_mic(struct tkip_ctx *ctx, const u8 *key,
|
|
|
|
struct mbuf *m, u_int off, size_t data_len,
|
|
|
|
u8 mic[IEEE80211_WEP_MICLEN])
|
|
|
|
{
|
|
|
|
uint8_t hdr[16];
|
|
|
|
u32 l, r;
|
|
|
|
const uint8_t *data;
|
|
|
|
u_int space;
|
|
|
|
|
|
|
|
michael_mic_hdr(mtod(m, struct ieee80211_frame *), hdr);
|
|
|
|
|
|
|
|
l = get_le32(key);
|
|
|
|
r = get_le32(key + 4);
|
|
|
|
|
|
|
|
/* Michael MIC pseudo header: DA, SA, 3 x 0, Priority */
|
|
|
|
l ^= get_le32(hdr);
|
|
|
|
michael_block(l, r);
|
|
|
|
l ^= get_le32(&hdr[4]);
|
|
|
|
michael_block(l, r);
|
|
|
|
l ^= get_le32(&hdr[8]);
|
|
|
|
michael_block(l, r);
|
|
|
|
l ^= get_le32(&hdr[12]);
|
|
|
|
michael_block(l, r);
|
|
|
|
|
|
|
|
/* first buffer has special handling */
|
|
|
|
data = mtod(m, const uint8_t *) + off;
|
|
|
|
space = m->m_len - off;
|
|
|
|
for (;;) {
|
|
|
|
if (space > data_len)
|
|
|
|
space = data_len;
|
|
|
|
/* collect 32-bit blocks from current buffer */
|
|
|
|
while (space >= sizeof(uint32_t)) {
|
|
|
|
l ^= get_le32(data);
|
|
|
|
michael_block(l, r);
|
|
|
|
data += sizeof(uint32_t), space -= sizeof(uint32_t);
|
|
|
|
data_len -= sizeof(uint32_t);
|
|
|
|
}
|
|
|
|
if (data_len < sizeof(uint32_t))
|
|
|
|
break;
|
|
|
|
m = m->m_next;
|
|
|
|
if (m == NULL) {
|
2005-06-22 10:14:51 +04:00
|
|
|
IASSERT(0, ("out of data, data_len %zu\n", data_len));
|
2005-06-22 00:37:38 +04:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (space != 0) {
|
|
|
|
const uint8_t *data_next;
|
|
|
|
/*
|
|
|
|
* Block straddles buffers, split references.
|
|
|
|
*/
|
|
|
|
data_next = mtod(m, const uint8_t *);
|
2005-06-22 10:14:51 +04:00
|
|
|
IASSERT(m->m_len >= sizeof(uint32_t) - space,
|
2005-06-22 00:37:38 +04:00
|
|
|
("not enough data in following buffer, "
|
|
|
|
"m_len %u need %zu\n", m->m_len,
|
|
|
|
sizeof(uint32_t) - space));
|
|
|
|
switch (space) {
|
|
|
|
case 1:
|
|
|
|
l ^= get_le32_split(data[0], data_next[0],
|
|
|
|
data_next[1], data_next[2]);
|
|
|
|
data = data_next + 3;
|
|
|
|
space = m->m_len - 3;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
l ^= get_le32_split(data[0], data[1],
|
|
|
|
data_next[0], data_next[1]);
|
|
|
|
data = data_next + 2;
|
|
|
|
space = m->m_len - 2;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
l ^= get_le32_split(data[0], data[1],
|
|
|
|
data[2], data_next[0]);
|
|
|
|
data = data_next + 1;
|
|
|
|
space = m->m_len - 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
michael_block(l, r);
|
|
|
|
data_len -= sizeof(uint32_t);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* Setup for next buffer.
|
|
|
|
*/
|
|
|
|
data = mtod(m, const uint8_t *);
|
|
|
|
space = m->m_len;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Last block and padding (0x5a, 4..7 x 0) */
|
|
|
|
switch (data_len) {
|
|
|
|
case 0:
|
|
|
|
l ^= get_le32_split(0x5a, 0, 0, 0);
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
l ^= get_le32_split(data[0], 0x5a, 0, 0);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
l ^= get_le32_split(data[0], data[1], 0x5a, 0);
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
l ^= get_le32_split(data[0], data[1], data[2], 0x5a);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
michael_block(l, r);
|
|
|
|
/* l ^= 0; */
|
|
|
|
michael_block(l, r);
|
|
|
|
|
|
|
|
put_le32(mic, l);
|
|
|
|
put_le32(mic + 4, r);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
tkip_encrypt(struct tkip_ctx *ctx, struct ieee80211_key *key,
|
|
|
|
struct mbuf *m, int hdrlen)
|
|
|
|
{
|
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
uint8_t icv[IEEE80211_WEP_CRCLEN];
|
|
|
|
|
|
|
|
ctx->tc_ic->ic_stats.is_crypto_tkip++;
|
|
|
|
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
if (!ctx->tx_phase1_done) {
|
|
|
|
tkip_mixing_phase1(ctx->tx_ttak, key->wk_key, wh->i_addr2,
|
|
|
|
(u32)(key->wk_keytsc >> 16));
|
|
|
|
ctx->tx_phase1_done = 1;
|
|
|
|
}
|
|
|
|
tkip_mixing_phase2(ctx->tx_rc4key, key->wk_key, ctx->tx_ttak,
|
|
|
|
(u16) key->wk_keytsc);
|
|
|
|
|
|
|
|
wep_encrypt(ctx->tx_rc4key,
|
|
|
|
m, hdrlen + tkip.ic_header,
|
|
|
|
m->m_pkthdr.len - (hdrlen + tkip.ic_header),
|
|
|
|
icv);
|
|
|
|
(void) m_append(m, IEEE80211_WEP_CRCLEN, icv); /* XXX check return */
|
|
|
|
|
|
|
|
key->wk_keytsc++;
|
|
|
|
if ((u16)(key->wk_keytsc) == 0)
|
|
|
|
ctx->tx_phase1_done = 0;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
tkip_decrypt(struct tkip_ctx *ctx, struct ieee80211_key *key,
|
|
|
|
struct mbuf *m, int hdrlen)
|
|
|
|
{
|
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
u32 iv32;
|
|
|
|
u16 iv16;
|
|
|
|
|
|
|
|
ctx->tc_ic->ic_stats.is_crypto_tkip++;
|
|
|
|
|
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
/* NB: tkip_decap already verified header and left seq in rx_rsc */
|
|
|
|
iv16 = (u16) ctx->rx_rsc;
|
|
|
|
iv32 = (u32) (ctx->rx_rsc >> 16);
|
|
|
|
|
|
|
|
if (iv32 != (u32)(key->wk_keyrsc >> 16) || !ctx->rx_phase1_done) {
|
|
|
|
tkip_mixing_phase1(ctx->rx_ttak, key->wk_key,
|
|
|
|
wh->i_addr2, iv32);
|
|
|
|
ctx->rx_phase1_done = 1;
|
|
|
|
}
|
|
|
|
tkip_mixing_phase2(ctx->rx_rc4key, key->wk_key, ctx->rx_ttak, iv16);
|
|
|
|
|
|
|
|
/* NB: m is unstripped; deduct headers + ICV to get payload */
|
|
|
|
if (wep_decrypt(ctx->rx_rc4key,
|
|
|
|
m, hdrlen + tkip.ic_header,
|
|
|
|
m->m_pkthdr.len - (hdrlen + tkip.ic_header + tkip.ic_trailer))) {
|
|
|
|
if (iv32 != (u32)(key->wk_keyrsc >> 16)) {
|
|
|
|
/* Previously cached Phase1 result was already lost, so
|
|
|
|
* it needs to be recalculated for the next packet. */
|
|
|
|
ctx->rx_phase1_done = 0;
|
|
|
|
}
|
|
|
|
IEEE80211_DPRINTF(ctx->tc_ic, IEEE80211_MSG_CRYPTO,
|
|
|
|
"[%s] TKIP ICV mismatch on decrypt\n",
|
|
|
|
ether_sprintf(wh->i_addr2));
|
|
|
|
ctx->tc_ic->ic_stats.is_rx_tkipicv++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
return 1;
|
|
|
|
}
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
|
|
|
|
IEEE80211_CRYPTO_SETUP(tkip_register)
|
|
|
|
{
|
|
|
|
ieee80211_crypto_register(&tkip);
|
|
|
|
}
|