Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic/ac97.c

2336 lines
68 KiB
C
Raw Normal View History

split device_t/softc for all remaining drivers. replace "struct device *" with "device_t". use device_xname(), device_unit(), etc.
2012-10-27 21:17:22 +04:00
/* $NetBSD: ac97.c,v 1.95 2012/10/27 17:18:18 chs Exp $ */
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
/* $OpenBSD: ac97.c,v 1.8 2000/07/19 09:01:35 csapuntz Exp $ */
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
/*
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
* Copyright (c) 1999, 2000 Constantine Sapuntzakis
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
*
* Author: Constantine Sapuntzakis <csapuntz@stanford.edu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
*/
/* Partially inspired by FreeBSD's sys/dev/pcm/ac97.c. It came with
the following copyright */
/*
* Copyright (c) 1999 Cameron Grant <gandalf@vilnya.demon.co.uk>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
add/cleanup RCSID
2001-11-13 16:14:31 +03:00
#include <sys/cdefs.h>
split device_t/softc for all remaining drivers. replace "struct device *" with "device_t". use device_xname(), device_unit(), etc.
2012-10-27 21:17:22 +04:00
__KERNEL_RCSID(0, "$NetBSD: ac97.c,v 1.95 2012/10/27 17:18:18 chs Exp $");
add/cleanup RCSID
2001-11-13 16:14:31 +03:00
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/device.h>
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
#include <sys/sysctl.h>
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
#include <sys/audioio.h>
#include <dev/audio_if.h>
Move register definitions into ac97reg.h
2000-05-15 05:32:03 +04:00
#include <dev/ic/ac97reg.h>
#include <dev/ic/ac97var.h>
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
struct ac97_softc;
struct ac97_source_info;
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int ac97_mixer_get_port(struct ac97_codec_if *, mixer_ctrl_t *);
static int ac97_mixer_set_port(struct ac97_codec_if *, mixer_ctrl_t *);
- nuke __P() - add ac97_codec_if_vtbl::detach()
2004-11-08 17:24:17 +03:00
static void ac97_detach(struct ac97_codec_if *);
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
static void ac97_lock(struct ac97_codec_if *);
static void ac97_unlock(struct ac97_codec_if *);
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int ac97_query_devinfo(struct ac97_codec_if *, mixer_devinfo_t *);
static int ac97_get_portnum_by_name(struct ac97_codec_if *, const char *,
const char *, const char *);
static void ac97_restore_shadow(struct ac97_codec_if *);
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
static int ac97_set_rate(struct ac97_codec_if *, int, u_int *);
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void ac97_set_clock(struct ac97_codec_if *, unsigned int);
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
static uint16_t ac97_get_extcaps(struct ac97_codec_if *);
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int ac97_add_port(struct ac97_softc *,
const struct ac97_source_info *);
static int ac97_str_equal(const char *, const char *);
static int ac97_check_capability(struct ac97_softc *, int);
static void ac97_setup_source_info(struct ac97_softc *);
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
static void ac97_read(struct ac97_softc *, uint8_t, uint16_t *);
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void ac97_setup_defaults(struct ac97_softc *);
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
static int ac97_write(struct ac97_softc *, uint8_t, uint16_t);
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void ac97_ad198x_init(struct ac97_softc *);
static void ac97_alc650_init(struct ac97_softc *);
Support UCB1400. It tested on GUMSTIX with audiostix. However GUMSTIX needs more ad-hoc patch.
2009-07-13 16:54:11 +04:00
static void ac97_ucb1400_init(struct ac97_softc *);
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void ac97_vt1616_init(struct ac97_softc *);
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
static int ac97_modem_offhook_set(struct ac97_softc *, int, int);
static int ac97_sysctl_verify(SYSCTLFN_ARGS);
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
#define Ac97Nphone "phone"
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
#define Ac97Nline1 "line1"
#define Ac97Nline2 "line2"
#define Ac97Nhandset "handset"
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
static const struct audio_mixer_enum
add missing initializers
2006-09-02 21:02:57 +04:00
ac97_on_off = { 2, { { { AudioNoff, 0 } , 0 },
{ { AudioNon, 0 } , 1 },
Array range designated initializers are a gcc extension. Replace with explicit initialization with zeros, although it probably isn't necessary.
2008-06-24 14:57:45 +04:00
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 }, } };
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
static const struct audio_mixer_enum
add missing initializers
2006-09-02 21:02:57 +04:00
ac97_mic_select = { 2, { { { AudioNmicrophone "0", 0 }, 0 },
{ { AudioNmicrophone "1", 0 }, 1 },
Array range designated initializers are a gcc extension. Replace with explicit initialization with zeros, although it probably isn't necessary.
2008-06-24 14:57:45 +04:00
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 }, } };
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
static const struct audio_mixer_enum
add missing initializers
2006-09-02 21:02:57 +04:00
ac97_mono_select = { 2, { { { AudioNmixerout, 0 }, 0 },
{ { AudioNmicrophone, 0 }, 1 },
Array range designated initializers are a gcc extension. Replace with explicit initialization with zeros, although it probably isn't necessary.
2008-06-24 14:57:45 +04:00
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 }, } };
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
static const struct audio_mixer_enum
add missing initializers
2006-09-02 21:02:57 +04:00
ac97_source = { 8, { { { AudioNmicrophone, 0 } , 0 },
{ { AudioNcd, 0 }, 1 },
{ { AudioNvideo, 0 }, 2 },
{ { AudioNaux, 0 }, 3 },
{ { AudioNline, 0 }, 4 },
{ { AudioNmixerout, 0 }, 5 },
{ { AudioNmixerout AudioNmono, 0 }, 6 },
{ { Ac97Nphone, 0 }, 7 },
Array range designated initializers are a gcc extension. Replace with explicit initialization with zeros, although it probably isn't necessary.
2008-06-24 14:57:45 +04:00
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 },
{ { "", 0 } , 0 }, } };
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Set the delta for the particular source so telling mixerctl to decrease the volume (using --) adjusts it far enough to stick.
2001-04-29 06:47:25 +04:00
/*
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
* Due to different values for each source that uses these structures,
Set the delta for the particular source so telling mixerctl to decrease the volume (using --) adjusts it far enough to stick.
2001-04-29 06:47:25 +04:00
* the ac97_query_devinfo function sets delta in mixer_devinfo_t using
* ac97_source_info.bits.
*/
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
static const struct audio_mixer_value
add missing initializers
2006-09-02 21:02:57 +04:00
ac97_volume_stereo = { { AudioNvolume, 0 }, 2, 0 };
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
static const struct audio_mixer_value
add missing initializers
2006-09-02 21:02:57 +04:00
ac97_volume_mono = { { AudioNvolume, 0 }, 1, 0 };
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
#define WRAP(a) &a, sizeof(a)
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
struct ac97_source_info {
constify
2001-01-18 23:28:15 +03:00
const char *class;
const char *device;
const char *qualifier;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
int type;
constify
2001-01-18 23:28:15 +03:00
const void *info;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
int info_size;
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint8_t reg;
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
int32_t default_value;
implement auto-detection of volume resolutions
2006-08-23 15:24:07 +04:00
unsigned bits:3;
unsigned ofs:4;
unsigned mute:1;
unsigned polarity:1; /* Does 0 == MAX or MIN */
unsigned checkbits:1;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
enum {
CHECK_NONE = 0,
CHECK_SURROUND,
CHECK_CENTER,
CHECK_LFE,
CHECK_HEADPHONES,
CHECK_TONE,
CHECK_MIC,
CHECK_LOUDNESS,
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
CHECK_3D,
CHECK_LINE1,
CHECK_LINE2,
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
CHECK_HANDSET,
CHECK_SPDIF
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
} req_feature;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
int prev;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
int next;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
int mixer_class;
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
};
static const struct ac97_source_info audio_source_info[] = {
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, NULL, NULL,
add missing initializers
2006-09-02 21:02:57 +04:00
AUDIO_MIXER_CLASS, NULL, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
{ AudioCoutputs, NULL, 0,
AUDIO_MIXER_CLASS, NULL, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
{ AudioCrecord, NULL, 0,
AUDIO_MIXER_CLASS, NULL, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
/* Stereo master volume*/
add missing initializers
2006-09-02 21:02:57 +04:00
{ AudioCoutputs, AudioNmaster, 0,
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_MASTER_VOLUME, 0x8000, 5, 0, 1, 0, 1, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Mono volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNmono, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_MASTER_VOLUME_MONO, 0x8000, 6, 0, 1, 0, 1, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNmono, AudioNsource,
AUDIO_MIXER_ENUM, WRAP(ac97_mono_select),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_GP, 0x0000, 1, 9, 0, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Headphone volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNheadphone, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_HEADPHONE_VOLUME, 0x8000, 5, 0, 1, 0, 1, CHECK_HEADPHONES, 0, 0, 0,
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
},
/* Surround volume - logic hard coded for mute */
{ AudioCoutputs, AudioNsurround, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_SURR_MASTER, 0x8080, 5, 0, 1, 0, 1, CHECK_SURROUND, 0, 0, 0
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
},
/* Center volume*/
{ AudioCoutputs, AudioNcenter, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_CENTER_LFE_MASTER, 0x8080, 5, 0, 0, 0, 1, CHECK_CENTER, 0, 0, 0
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
},
{ AudioCoutputs, AudioNcenter, AudioNmute,
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_CENTER_LFE_MASTER, 0x8080, 1, 7, 0, 0, 0, CHECK_CENTER, 0, 0, 0
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
},
/* LFE volume*/
{ AudioCoutputs, AudioNlfe, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_CENTER_LFE_MASTER, 0x8080, 5, 8, 0, 0, 1, CHECK_LFE, 0, 0, 0
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
},
{ AudioCoutputs, AudioNlfe, AudioNmute,
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_CENTER_LFE_MASTER, 0x8080, 1, 15, 0, 0, 0, CHECK_LFE, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
split outputs.tone to outputs.bass and outputs.treble from OpenBSD
2004-10-12 18:34:41 +04:00
/* Tone - bass */
{ AudioCoutputs, AudioNbass, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_MASTER_TONE, 0x0f0f, 4, 8, 0, 0, 0, CHECK_TONE, 0, 0, 0
split outputs.tone to outputs.bass and outputs.treble from OpenBSD
2004-10-12 18:34:41 +04:00
},
/* Tone - treble */
{ AudioCoutputs, AudioNtreble, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_MASTER_TONE, 0x0f0f, 4, 0, 0, 0, 0, CHECK_TONE, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* PC Beep Volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNspeaker, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_PCBEEP_VOLUME, 0x0000, 4, 1, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
/* Phone */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, Ac97Nphone, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_PHONE_VOLUME, 0x8008, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Mic Volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNmicrophone, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_MIC_VOLUME, 0x8008, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNmicrophone, AudioNpreamp,
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_MIC_VOLUME, 0x8008, 1, 6, 0, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNmicrophone, AudioNsource,
AUDIO_MIXER_ENUM, WRAP(ac97_mic_select),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_GP, 0x0000, 1, 8, 0, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Line in Volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNline, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_LINEIN_VOLUME, 0x8808, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* CD Volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNcd, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_CD_VOLUME, 0x8808, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Video Volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNvideo, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_VIDEO_VOLUME, 0x8808, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* AUX volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNaux, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_AUX_VOLUME, 0x8808, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* PCM out volume */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCinputs, AudioNdac, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_PCMOUT_VOLUME, 0x8808, 5, 0, 1, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Record Source - some logic for this is hard coded - see below */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCrecord, AudioNsource, NULL,
AUDIO_MIXER_ENUM, WRAP(ac97_source),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_RECORD_SELECT, 0x0000, 3, 0, 0, 0, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Record Gain */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCrecord, AudioNvolume, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_stereo),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_RECORD_GAIN, 0x8000, 4, 0, 1, 1, 0, 0, 0, 0, 0,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* Record Gain mic */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCrecord, AudioNmicrophone, NULL,
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_RECORD_GAIN_MIC, 0x8000, 4, 0, 1, 1, 0, CHECK_MIC, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
/* */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNloudness, NULL,
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_GP, 0x0000, 1, 12, 0, 0, 0, CHECK_LOUDNESS, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNspatial, NULL,
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_GP, 0x0000, 1, 13, 0, 1, 0, CHECK_3D, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNspatial, "center",
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_3D_CONTROL, 0x0000, 4, 8, 0, 1, 0, CHECK_3D, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNspatial, "depth",
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_3D_CONTROL, 0x0000, 4, 0, 0, 1, 0, CHECK_3D, 0, 0, 0
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
},
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
/* SPDIF */
{ "spdif", NULL, NULL,
AUDIO_MIXER_CLASS, NULL, 0,
add missing initializers
2006-09-02 21:02:57 +04:00
0, 0, 0, 0, 0, 0, 0, CHECK_SPDIF, 0, 0, 0
},
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
{ "spdif", "enable", NULL,
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_EXT_AUDIO_CTRL, -1, 1, 2, 0, 0, 0, CHECK_SPDIF, 0, 0, 0
},
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
/* Missing features: Simulated Stereo, POP, Loopback mode */
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
};
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
static const struct ac97_source_info modem_source_info[] = {
/* Classes */
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
{ AudioCinputs, NULL, NULL,
add missing initializers
2006-09-02 21:02:57 +04:00
AUDIO_MIXER_CLASS, NULL, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
{ AudioCoutputs, NULL, NULL,
add missing initializers
2006-09-02 21:02:57 +04:00
AUDIO_MIXER_CLASS, NULL, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, },
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
{ AudioCinputs, Ac97Nline1, NULL,
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_LINE1_LEVEL, 0x8080, 4, 0, 0, 1, 0, CHECK_LINE1, 0, 0, 0
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
},
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
{ AudioCoutputs, Ac97Nline1, NULL,
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
AUDIO_MIXER_VALUE, WRAP(ac97_volume_mono),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_LINE1_LEVEL, 0x8080, 4, 8, 0, 1, 0, CHECK_LINE1, 0, 0, 0
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
},
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
{ AudioCinputs, Ac97Nline1, AudioNmute,
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_LINE1_LEVEL, 0x8080, 1, 7, 0, 0, 0, CHECK_LINE1, 0, 0, 0
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
},
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
{ AudioCoutputs, Ac97Nline1, AudioNmute,
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_REG_LINE1_LEVEL, 0x8080, 1, 15, 0, 0, 0, CHECK_LINE1, 0, 0, 0
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
},
};
#define AUDIO_SOURCE_INFO_SIZE \
(sizeof(audio_source_info)/sizeof(audio_source_info[0]))
#define MODEM_SOURCE_INFO_SIZE \
(sizeof(modem_source_info)/sizeof(modem_source_info[0]))
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
#define SOURCE_INFO_SIZE(as) ((as)->type == AC97_CODEC_TYPE_MODEM ? \
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
MODEM_SOURCE_INFO_SIZE : AUDIO_SOURCE_INFO_SIZE)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
/*
Update documentation URL. Previous one was leading to a "Page not found".
2007-02-17 00:05:40 +03:00
* Check out http://www.intel.com/support/motherboards/desktop/sb/cs-025406.htm for
* AC'97 Component Specification
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
*/
struct ac97_softc {
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
/* ac97_codec_if must be at the first of ac97_softc. */
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
struct ac97_codec_if codec_if;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
struct ac97_host_if *host_if;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
kmutex_t *lock;
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
#define AUDIO_MAX_SOURCES (2 * AUDIO_SOURCE_INFO_SIZE)
#define MODEM_MAX_SOURCES (2 * MODEM_SOURCE_INFO_SIZE)
struct ac97_source_info audio_source_info[AUDIO_MAX_SOURCES];
struct ac97_source_info modem_source_info[MODEM_MAX_SOURCES];
struct ac97_source_info *source_info;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
int num_source_info;
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
enum ac97_host_flags host_flags;
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
unsigned int ac97_clock; /* usually 48000 */
#define AC97_STANDARD_CLOCK 48000U
Add a heuristic to test if an audio CODEC's AC97_REG_POWER register supports the AC97_POWER_ANL bit. The heuristic simply checks if AC97_REG_POWER's AC97_POWER_MIXER bit can be set, implying the CODEC can control power to its mixer. If the bit reads back as zero after we set it, assume ANL is reserved. Without this patch, some CODECs (e.g. Philips UCB1400) will experience long delays during attach and resume while the driver waits for a bit which will never set. Thanks to jmcneill@ for reviewing this WRT AC97 modem power control.
2005-05-11 17:13:11 +04:00
uint16_t power_all;
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
uint16_t power_reg; /* -> AC97_REG_POWER */
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint16_t caps; /* -> AC97_REG_RESET */
uint16_t ext_id; /* -> AC97_REG_EXT_AUDIO_ID */
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
uint16_t ext_mid; /* -> AC97_REG_EXT_MODEM_ID */
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint16_t shadow_reg[128];
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
int lock_counter;
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
int type;
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
/* sysctl */
struct sysctllog *log;
int offhook_line1_mib;
int offhook_line2_mib;
int offhook_line1;
int offhook_line2;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
};
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static struct ac97_codec_if_vtbl ac97civ = {
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
ac97_mixer_get_port,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
ac97_mixer_set_port,
ac97_query_devinfo,
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
ac97_get_portnum_by_name,
ac97_restore_shadow,
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
ac97_get_extcaps,
ac97_set_rate,
ac97_set_clock,
- nuke __P() - add ac97_codec_if_vtbl::detach()
2004-11-08 17:24:17 +03:00
ac97_detach,
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
ac97_lock,
ac97_unlock,
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
};
Recognize the Crystal CS4297A codec, and add a couple of macros to manipulate AC97 codec IDs.
2000-04-26 04:00:41 +04:00
static const struct ac97_codecid {
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint32_t id;
uint32_t mask;
Recognize the Crystal CS4297A codec, and add a couple of macros to manipulate AC97 codec IDs.
2000-04-26 04:00:41 +04:00
const char *name;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
void (*init)(struct ac97_softc *);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
} ac97codecid[] = {
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
/*
* Analog Devices SoundMAX
* http://www.soundmax.com/products/information/codecs.html
* http://www.analog.com/productSelection/pdf/AD1881A_0.pdf
* http://www.analog.com/productSelection/pdf/AD1885_0.pdf
Use bitmask_snprintf() for printing ext id features.
2003-09-07 15:27:32 +04:00
* http://www.analog.com/UploadedFiles/Data_Sheets/206585810AD1980_0.pdf
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
* http://www.analog.com/productSelection/pdf/AD1981A_0.pdf
* http://www.analog.com/productSelection/pdf/AD1981B_0.pdf
codec id for AD1985
2003-09-28 19:39:09 +04:00
* http://www.analog.com/UploadedFiles/Data_Sheets/180644528AD1985_0.pdf
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
*/
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 3),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1819B", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x40),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1881", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x48),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1881A", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x60),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1885", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x61),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1886", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x63),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1886A", NULL, },
AD1888 support. PR kern/25949
2004-08-07 21:37:31 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x68),
0xffffffff, "Analog Devices AD1888", ac97_ad198x_init },
Recognize AD1981 codec (0x41445370). XXX name is a guess but it follows the existing pattern.
2002-12-26 23:56:52 +03:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x70),
AD1985 codec needs the same quirk as AD1980. The patch was provided by Lars Heidieker.
2003-11-22 09:15:29 +03:00
0xffffffff, "Analog Devices AD1980", ac97_ad198x_init },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x72),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1981A", NULL, },
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x74),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Analog Devices AD1981B", NULL, },
codec id for AD1985
2003-09-28 19:39:09 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0x75),
AD1985 codec needs the same quirk as AD1980. The patch was provided by Lars Heidieker.
2003-11-22 09:15:29 +03:00
0xffffffff, "Analog Devices AD1985", ac97_ad198x_init },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'D', 'S', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Analog Devices unknown", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/*
* Datasheets:
Update URLs to ASAHI KASEI CODECs.
2006-05-10 13:07:57 +04:00
* http://www.asahi-kasei.co.jp/akm/japanese/product/ak4543/ek4543.pdf
* http://www.asahi-kasei.co.jp/akm/japanese/product/ak4544a/ek4544a.pdf
* http://www.asahi-kasei.co.jp/akm/japanese/product/ak4545/ak4545_f00e.pdf
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
*/
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Asahi Kasei AK4540", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 1),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Asahi Kasei AK4542", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 2),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Asahi Kasei AK4541/AK4543", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 5),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Asahi Kasei AK4544", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 6),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Asahi Kasei AK4544A", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 7),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Asahi Kasei AK4545", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'K', 'M', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Asahi Kasei unknown", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/*
* Realtek & Avance Logic
* http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=5&famid=All&series=All&Spec=True
recognize ALC655/658/850
2004-08-07 20:59:54 +04:00
*
* ALC650 and ALC658 support VRA, but it supports only 8000, 11025,
* 12000, 16000, 22050, 24000, 32000, 44100, and 48000 Hz.
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
*/
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'L', 'C', 0x00),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff0, "Realtek RL5306", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('A', 'L', 'C', 0x10),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff0, "Realtek RL5382", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'L', 'C', 0x20),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff0, "Realtek RL5383/RL5522/ALC100", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x10),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Avance Logic ALC200/ALC201", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x20),
recognize ALC655/658/850
2004-08-07 20:59:54 +04:00
0xfffffff0, "Avance Logic ALC650", ac97_alc650_init },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x30),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Avance Logic ALC101", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x40),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Avance Logic ALC202", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x50),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Avance Logic ALC250", NULL, },
recognize ALC655/658/850
2004-08-07 20:59:54 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x60),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff0, "Avance Logic ALC655", NULL, },
Add the Avance Logic ALC203 code, found on e.g. alix3d3 boards.
2011-11-27 19:08:04 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x70),
0xffffffff, "Avance Logic ALC203", NULL, },
recognize ALC655/658/850
2004-08-07 20:59:54 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x80),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff0, "Avance Logic ALC658", NULL, },
recognize ALC655/658/850
2004-08-07 20:59:54 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0x90),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff0, "Avance Logic ALC850", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'L', 'C', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Realtek unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('A', 'L', 'G', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Avance Logic unknown", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
recognize CMI9739 codec.
2004-08-08 07:50:56 +04:00
/**
* C-Media Electronics Inc.
* http://www.cmedia.com.tw/doc/CMI9739%206CH%20Audio%20Codec%20SPEC_Ver12.pdf
*/
{ AC97_CODEC_ID('C', 'M', 'I', 0x61),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "C-Media CMI9739", NULL, },
recognize CMI9739 codec.
2004-08-08 07:50:56 +04:00
{ AC97_CODEC_ID('C', 'M', 'I', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "C-Media unknown", NULL, },
recognize CMI9739 codec.
2004-08-08 07:50:56 +04:00
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
/* Cirrus Logic, Crystal series:
* 'C' 'R' 'Y' 0x0[0-7] - CS4297
* 0x1[0-7] - CS4297A
* 0x2[0-7] - CS4298
* 0x2[8-f] - CS4294
* 0x3[0-7] - CS4299
* 0x4[8-f] - CS4201
* 0x5[8-f] - CS4205
* 0x6[0-7] - CS4291
* 0x7[0-7] - CS4202
* Datasheets:
* http://www.cirrus.com/pubs/cs4297A-5.pdf?DocumentID=593
* http://www.cirrus.com/pubs/cs4294.pdf?DocumentID=32
* http://www.cirrus.com/pubs/cs4299-5.pdf?DocumentID=594
* http://www.cirrus.com/pubs/cs4201-2.pdf?DocumentID=492
* http://www.cirrus.com/pubs/cs4205-2.pdf?DocumentID=492
* http://www.cirrus.com/pubs/cs4202-1.pdf?DocumentID=852
*/
{ AC97_CODEC_ID('C', 'R', 'Y', 0x00),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4297", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x10),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4297A", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x20),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4298", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x28),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4294", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x30),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4299", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x48),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4201", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x58),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4205", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x60),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4291", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0x70),
add missing initializers
2006-09-02 21:02:57 +04:00
0xfffffff8, "Crystal CS4202", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('C', 'R', 'Y', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Cirrus Logic unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
add missing initializers
2006-09-02 21:02:57 +04:00
{ 0x45838308, 0xffffffff, "ESS Technology ES1921", NULL, },
{ 0x45838300, AC97_VENDOR_ID_MASK, "ESS Technology unknown", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('H', 'R', 'S', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Intersil HMP9701", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('H', 'R', 'S', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Intersil unknown", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
/*
* IC Ensemble (VIA)
* http://www.viatech.com/en/datasheet/DS1616.pdf
*/
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('I', 'C', 'E', 0x01),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "ICEnsemble ICE1230/VT1611", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('I', 'C', 'E', 0x11),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "ICEnsemble ICE1232/VT1611A", NULL, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AC97_CODEC_ID('I', 'C', 'E', 0x14),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "ICEnsemble ICE1232A", NULL, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AC97_CODEC_ID('I', 'C', 'E', 0x51),
0xffffffff, "VIA Technologies VT1616", ac97_vt1616_init },
VT1616i support
2004-08-08 14:41:57 +04:00
{ AC97_CODEC_ID('I', 'C', 'E', 0x52),
0xffffffff, "VIA Technologies VT1616i", ac97_vt1616_init },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('I', 'C', 'E', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "ICEnsemble/VIA unknown", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('N', 'S', 'C', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "National Semiconductor LM454[03568]", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('N', 'S', 'C', 49),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "National Semiconductor LM4549", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('N', 'S', 'C', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "National Semiconductor unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
add Philips UCB1400
2003-03-03 05:14:12 +03:00
{ AC97_CODEC_ID('P', 'S', 'C', 4),
Support UCB1400. It tested on GUMSTIX with audiostix. However GUMSTIX needs more ad-hoc patch.
2009-07-13 16:54:11 +04:00
0xffffffff, "Philips Semiconductor UCB1400", ac97_ucb1400_init, },
add Philips UCB1400
2003-03-03 05:14:12 +03:00
{ AC97_CODEC_ID('P', 'S', 'C', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Philips Semiconductor unknown", NULL, },
add Philips UCB1400
2003-03-03 05:14:12 +03:00
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('S', 'I', 'L', 34),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Silicon Laboratory Si3036", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('S', 'I', 'L', 35),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Silicon Laboratory Si3038", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('S', 'I', 'L', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Silicon Laboratory unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('T', 'R', 'A', 2),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "TriTech TR28022", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('T', 'R', 'A', 3),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "TriTech TR28023", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('T', 'R', 'A', 6),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "TriTech TR28026", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('T', 'R', 'A', 8),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "TriTech TR28028", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('T', 'R', 'A', 35),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "TriTech TR28602", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('T', 'R', 'A', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "TriTech unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('T', 'X', 'N', 0x20),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Texas Instruments TLC320AD9xC", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('T', 'X', 'N', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Texas Instruments unknown", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
/*
* VIA
* http://www.viatech.com/en/multimedia/audio.jsp
*/
{ AC97_CODEC_ID('V', 'I', 'A', 0x61),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "VIA Technologies VT1612A", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('V', 'I', 'A', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "VIA Technologies unknown", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('W', 'E', 'C', 1),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Winbond W83971D", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('W', 'E', 'C', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Winbond unknown", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/*
* http://www.wolfsonmicro.com/product_list.asp?cid=64
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
* http://www.wolfsonmicro.com/download.asp/did.56/WM9701A.pdf - 00
* http://www.wolfsonmicro.com/download.asp/did.57/WM9703.pdf - 03
* http://www.wolfsonmicro.com/download.asp/did.58/WM9704M.pdf - 04
* http://www.wolfsonmicro.com/download.asp/did.59/WM9704Q.pdf - 04
* http://www.wolfsonmicro.com/download.asp/did.184/WM9705_Rev34.pdf - 05
* http://www.wolfsonmicro.com/download.asp/did.60/WM9707.pdf - 03
* http://www.wolfsonmicro.com/download.asp/did.136/WM9708.pdf - 03
* http://www.wolfsonmicro.com/download.asp/did.243/WM9710.pdf - 05
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
*/
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('W', 'M', 'L', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Wolfson WM9701A", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('W', 'M', 'L', 3),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Wolfson WM9703/WM9707/WM9708", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('W', 'M', 'L', 4),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Wolfson WM9704", NULL, },
Add all vendor/codec IDs which OpenBSD has and NetBSD doesn't have.
2002-10-16 20:38:25 +04:00
{ AC97_CODEC_ID('W', 'M', 'L', 5),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Wolfson WM9705/WM9710", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('W', 'M', 'L', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Wolfson unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/*
* http://www.yamaha.co.jp/english/product/lsi/us/products/pcaudio.html
* Datasheets:
* http://www.yamaha.co.jp/english/product/lsi/us/products/pdf/4MF743A20.pdf
* http://www.yamaha.co.jp/english/product/lsi/us/products/pdf/4MF753A20.pdf
*/
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('Y', 'M', 'H', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Yamaha YMF743-S", NULL, },
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ AC97_CODEC_ID('Y', 'M', 'H', 3),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Yamaha YMF753-S", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AC97_CODEC_ID('Y', 'M', 'H', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Yamaha unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/*
- update URLs for sigmatel. - add entry for "SigmaTel STAC9758/59" (seen on a new emuxki card)
2004-06-01 17:35:59 +04:00
* http://www.sigmatel.com/products/technical_docs.htm
* and
* http://www.sigmatel.com/documents/c-major-brochure-9-0.pdf
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
*/
add missing initializers
2006-09-02 21:02:57 +04:00
{ 0x83847600, 0xffffffff, "SigmaTel STAC9700", NULL, },
{ 0x83847604, 0xffffffff, "SigmaTel STAC9701/3/4/5", NULL, },
{ 0x83847605, 0xffffffff, "SigmaTel STAC9704", NULL, },
{ 0x83847608, 0xffffffff, "SigmaTel STAC9708", NULL, },
{ 0x83847609, 0xffffffff, "SigmaTel STAC9721/23", NULL, },
{ 0x83847644, 0xffffffff, "SigmaTel STAC9744/45", NULL, },
{ 0x83847650, 0xffffffff, "SigmaTel STAC9750/51", NULL, },
{ 0x83847652, 0xffffffff, "SigmaTel STAC9752/53", NULL, },
{ 0x83847656, 0xffffffff, "SigmaTel STAC9756/57", NULL, },
{ 0x83847658, 0xffffffff, "SigmaTel STAC9758/59", NULL, },
{ 0x83847666, 0xffffffff, "SigmaTel STAC9766/67", NULL, },
{ 0x83847684, 0xffffffff, "SigmaTel STAC9783/84", NULL, },
{ 0x83847600, AC97_VENDOR_ID_MASK, "SigmaTel unknown", NULL, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
/* Conexant AC'97 modems -- good luck finding datasheets! */
Add identifiers for Intel ICH3 AC'97 modems and CXT33 modem codecs, from Nicolas Joly <njoly _at_ pasteur _dot_ fr>.
2005-04-08 16:50:00 +04:00
{ AC97_CODEC_ID('C', 'X', 'T', 33),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Conexant HSD11246", NULL, },
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
{ AC97_CODEC_ID('C', 'X', 'T', 34),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Conexant D480 MDC V.92 Modem", NULL, },
Add "Conexant CXT48". This should have a more meaningful name, but I couldn't find it. So, I added this because it's better than printing "unknown codec". When we find a more decent name later, we can change this.
2005-11-06 13:08:24 +03:00
{ AC97_CODEC_ID('C', 'X', 'T', 48),
add missing initializers
2006-09-02 21:02:57 +04:00
0xffffffff, "Conexant CXT48", NULL, },
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
{ AC97_CODEC_ID('C', 'X', 'T', 0),
add missing initializers
2006-09-02 21:02:57 +04:00
AC97_VENDOR_ID_MASK, "Conexant unknown", NULL, },
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
{ 0,
add missing initializers
2006-09-02 21:02:57 +04:00
0, NULL, NULL, },
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
};
constify
2001-01-18 23:28:15 +03:00
static const char * const ac97enhancement[] = {
Clean up attachment printing a bit.
1999-11-02 08:41:27 +03:00
"no 3D stereo",
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
"Analog Devices Phat Stereo",
It corrected forgetting to attach ","
2002-01-23 17:50:45 +03:00
"Creative",
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
"National Semi 3D",
"Yamaha Ymersion",
"BBE 3D",
It corrected forgetting to attach ","
2002-01-23 17:50:45 +03:00
"Crystal Semi 3D",
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
"Qsound QXpander",
"Spatializer 3D",
"SRS 3D",
"Platform Tech 3D",
"AKM 3D",
"Aureal",
"AZTECH 3D",
"Binaura 3D",
"ESS Technology",
"Harman International VMAx",
"Nvidea 3D",
"Philips Incredible Sound",
"Texas Instruments' 3D",
"VLSI Technology 3D",
"TriTech 3D",
"Realtek 3D",
"Samsung 3D",
"Wolfson Microelectronics 3D",
"Delta Integration 3D",
"SigmaTel 3D",
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
"KS Waves 3D",
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
"Rockwell 3D",
"Unknown 3D",
"Unknown 3D",
"Unknown 3D",
};
constify
2001-01-18 23:28:15 +03:00
static const char * const ac97feature[] = {
Add some constant symbols for AC97 registers and values based on OpenBSD. Rename some symbols to sync with OpenBSD: AC97_REG_EXTENDED_ID -> AC97_REG_EXT_AUDIO_ID AC97_REG_EXTENDED_STATUS -> AC97_REG_EXT_AUDIO_CTRL AC97_CODEC_DOES_VRA/AC97_ENAB_VRA -> AC97_EXT_AUDIO_VRA AC97_CODEC_DOES_MICVRA/AC97_ENAB_MICVRA -> AC97_EXT_AUDIO_VRM ac97feature: "mic channel" -> "dedicated mic channel" ac97_attach(): print extended capabilities; VRA, DRA, SPDIF, VRM, CDAC, SDAC, LDAC.
2002-10-06 20:33:35 +04:00
"dedicated mic channel",
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
"reserved",
"tone",
"simulated stereo",
"headphone",
"bass boost",
"18 bit DAC",
"20 bit DAC",
"18 bit ADC",
"20 bit ADC"
};
/* #define AC97_DEBUG 10 */
add debug code for ac97_write(). It is enabled by defining AC97_IO_DEBUG.
2004-08-28 11:02:11 +04:00
/* #define AC97_IO_DEBUG */
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
#ifdef AUDIO_DEBUG
#define DPRINTF(x) if (ac97debug) printf x
#define DPRINTFN(n,x) if (ac97debug>(n)) printf x
#ifdef AC97_DEBUG
int ac97debug = AC97_DEBUG;
#else
int ac97debug = 0;
#endif
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
add debug code for ac97_write(). It is enabled by defining AC97_IO_DEBUG.
2004-08-28 11:02:11 +04:00
#ifdef AC97_IO_DEBUG
static const char *ac97_register_names[0x80 / 2] = {
"RESET", "MASTER_VOLUME", "HEADPHONE_VOLUME", "MASTER_VOLUME_MONO",
"MASTER_TONE", "PCBEEP_VOLUME", "PHONE_VOLUME", "MIC_VOLUME",
"LINEIN_VOLUME", "CD_VOLUME", "VIDEO_VOLUME", "AUX_VOLUME",
"PCMOUT_VOLUME", "RECORD_SELECT", "RECORD_GATIN", "RECORD_GAIN_MIC",
"GP", "3D_CONTROL", "AUDIO_INT", "POWER",
"EXT_AUDIO_ID", "EXT_AUDIO_CTRL", "PCM_FRONT_DAC_RATE", "PCM_SURR_DAC_RATE",
"PCM_LFE_DAC_RATE", "PCM_LR_ADC_RATE", "PCM_MIC_ADC_RATE", "CENTER_LFE_MASTER",
"SURR_MASTER", "SPDIF_CTRL", "EXT_MODEM_ID", "EXT_MODEM_CTRL",
"LINE1_RATE", "LINE2_RATE", "HANDSET_RATE", "LINE1_LEVEL",
"LINE2_LEVEL", "HANDSET_LEVEL", "GPIO_PIN_CONFIG", "GPIO_PIN_POLARITY",
"GPIO_PIN_STICKY", "GPIO_PIN_WAKEUP", "GPIO_PIN_STATUS", "MISC_MODEM_CTRL",
"0x58", "VENDOR-5A", "VENDOR-5C", "VENDOR-5E",
"0x60", "0x62", "0x64", "0x66",
"0x68", "0x6a", "0x6c", "0x6e",
"VENDOR-70", "VENDOR-72", "VENDOR-74", "VENDOR-76",
"VENDOR-78", "VENDOR-7A", "VENDOR_ID1", "VENDOR_ID2"
};
#endif
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
/*
* XXX Some cards have an inverted AC97_POWER_EAMP bit.
* These cards will produce no sound unless AC97_HOST_INVERTED_EAMP is set.
*/
#define POWER_EAMP_ON(as) ((as->host_flags & AC97_HOST_INVERTED_EAMP) \
? AC97_POWER_EAMP : 0)
#define POWER_EAMP_OFF(as) ((as->host_flags & AC97_HOST_INVERTED_EAMP) \
? 0 : AC97_POWER_EAMP)
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
ac97_read(struct ac97_softc *as, uint8_t reg, uint16_t *val)
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
{
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
if (as->host_flags & AC97_HOST_DONT_READ &&
(reg != AC97_REG_VENDOR_ID1 && reg != AC97_REG_VENDOR_ID2 &&
reg != AC97_REG_RESET)) {
*val = as->shadow_reg[reg >> 1];
return;
}
Remove variable that is only assigned too but not referenced.
2003-01-20 10:20:01 +03:00
if (as->host_if->read(as->host_if->arg, reg, val)) {
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
*val = as->shadow_reg[reg >> 1];
}
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
ac97_write(struct ac97_softc *as, uint8_t reg, uint16_t val)
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
{
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
add debug code for ac97_write(). It is enabled by defining AC97_IO_DEBUG.
2004-08-28 11:02:11 +04:00
#ifndef AC97_IO_DEBUG
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
as->shadow_reg[reg >> 1] = val;
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return as->host_if->write(as->host_if->arg, reg, val);
add debug code for ac97_write(). It is enabled by defining AC97_IO_DEBUG.
2004-08-28 11:02:11 +04:00
#else
int ret;
uint16_t actual;
as->shadow_reg[reg >> 1] = val;
ret = as->host_if->write(as->host_if->arg, reg, val);
as->host_if->read(as->host_if->arg, reg, &actual);
if (val != actual && reg < 0x80) {
printf("ac97_write: reg=%s, written=0x%04x, read=0x%04x\n",
ac97_register_names[reg / 2], val, actual);
}
return ret;
#endif
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_setup_defaults(struct ac97_softc *as)
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
{
int idx;
constify
2001-01-18 23:28:15 +03:00
const struct ac97_source_info *si;
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
memset(as->shadow_reg, 0, sizeof(as->shadow_reg));
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
for (idx = 0; idx < AUDIO_SOURCE_INFO_SIZE; idx++) {
si = &audio_source_info[idx];
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
if (si->default_value >= 0)
ac97_write(as, si->reg, si->default_value);
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
}
for (idx = 0; idx < MODEM_SOURCE_INFO_SIZE; idx++) {
si = &modem_source_info[idx];
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
if (si->default_value >= 0)
ac97_write(as, si->reg, si->default_value);
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
}
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void
split device_t/softc for all remaining drivers. replace "struct device *" with "device_t". use device_xname(), device_unit(), etc.
2012-10-27 21:17:22 +04:00
ac97_restore_shadow(struct ac97_codec_if *codec_if)
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
{
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
struct ac97_softc *as;
constify
2001-01-18 23:28:15 +03:00
const struct ac97_source_info *si;
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
int idx;
Check power states after codec reset. This change fixes a resume problem on some boards. Patch provided by Joachim Thiemann in PR kern/26457
2004-08-20 18:36:13 +04:00
uint16_t val;
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
split device_t/softc for all remaining drivers. replace "struct device *" with "device_t". use device_xname(), device_unit(), etc.
2012-10-27 21:17:22 +04:00
as = (struct ac97_softc *)codec_if;
Check power states after codec reset. This change fixes a resume problem on some boards. Patch provided by Joachim Thiemann in PR kern/26457
2004-08-20 18:36:13 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Add a heuristic to test if an audio CODEC's AC97_REG_POWER register supports the AC97_POWER_ANL bit. The heuristic simply checks if AC97_REG_POWER's AC97_POWER_MIXER bit can be set, implying the CODEC can control power to its mixer. If the bit reads back as zero after we set it, assume ANL is reserved. Without this patch, some CODECs (e.g. Philips UCB1400) will experience long delays during attach and resume while the driver waits for a bit which will never set. Thanks to jmcneill@ for reviewing this WRT AC97 modem power control.
2005-05-11 17:13:11 +04:00
if (as->type == AC97_CODEC_TYPE_AUDIO) {
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
/* restore AC97_REG_POWER */
ac97_write(as, AC97_REG_POWER, as->power_reg);
Add a heuristic to test if an audio CODEC's AC97_REG_POWER register supports the AC97_POWER_ANL bit. The heuristic simply checks if AC97_REG_POWER's AC97_POWER_MIXER bit can be set, implying the CODEC can control power to its mixer. If the bit reads back as zero after we set it, assume ANL is reserved. Without this patch, some CODECs (e.g. Philips UCB1400) will experience long delays during attach and resume while the driver waits for a bit which will never set. Thanks to jmcneill@ for reviewing this WRT AC97 modem power control.
2005-05-11 17:13:11 +04:00
/* make sure chip is fully operational */
for (idx = 50000; idx >= 0; idx--) {
ac97_read(as, AC97_REG_POWER, &val);
if ((val & as->power_all) == as->power_all)
break;
DELAY(10);
}
/*
* actually try changing a value!
* The default value of AC97_REG_MASTER_VOLUME is 0x8000.
*/
for (idx = 50000; idx >= 0; idx--) {
ac97_write(as, AC97_REG_MASTER_VOLUME, 0x1010);
ac97_read(as, AC97_REG_MASTER_VOLUME, &val);
if (val == 0x1010)
break;
DELAY(10);
}
Check power states after codec reset. This change fixes a resume problem on some boards. Patch provided by Joachim Thiemann in PR kern/26457
2004-08-20 18:36:13 +04:00
}
make sure of readiness of an AC'97 codec by writing a value and reading it. There is a codec which is not operational just after power states become ready. PR#26457
2004-10-17 12:20:15 +04:00
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
for (idx = 0; idx < SOURCE_INFO_SIZE(as); idx++) {
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
if (as->type == AC97_CODEC_TYPE_MODEM)
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
si = &modem_source_info[idx];
else
si = &audio_source_info[idx];
Check power states after codec reset. This change fixes a resume problem on some boards. Patch provided by Joachim Thiemann in PR kern/26457
2004-08-20 18:36:13 +04:00
/* don't "restore" to the reset reg! */
if (si->reg != AC97_REG_RESET)
ac97_write(as, si->reg, as->shadow_reg[si->reg >> 1]);
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
}
In ac97_restore_shadow(), make sure to restore the codec's extended control register if we configured it during ac97_attach().
2003-06-11 18:22:27 +04:00
if (as->ext_id & (AC97_EXT_AUDIO_VRA | AC97_EXT_AUDIO_DRA
| AC97_EXT_AUDIO_SPDIF | AC97_EXT_AUDIO_VRM
| AC97_EXT_AUDIO_CDAC | AC97_EXT_AUDIO_SDAC
| AC97_EXT_AUDIO_LDAC)) {
ac97_write(as, AC97_REG_EXT_AUDIO_CTRL,
as->shadow_reg[AC97_REG_EXT_AUDIO_CTRL >> 1]);
}
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
if (as->ext_mid & (AC97_EXT_MODEM_LINE1 | AC97_EXT_MODEM_LINE2
| AC97_EXT_MODEM_HANDSET | AC97_EXT_MODEM_CID1
| AC97_EXT_MODEM_CID2 | AC97_EXT_MODEM_ID0
| AC97_EXT_MODEM_ID1)) {
ac97_write(as, AC97_REG_EXT_MODEM_CTRL,
as->shadow_reg[AC97_REG_EXT_MODEM_CTRL >> 1]);
}
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_str_equal(const char *a, const char *b)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return (a == b) || (a && b && (!strcmp(a, b)));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ac97_check_capability(struct ac97_softc *as, int check)
{
switch (check) {
case CHECK_NONE:
return 1;
case CHECK_SURROUND:
return as->ext_id & AC97_EXT_AUDIO_SDAC;
case CHECK_CENTER:
return as->ext_id & AC97_EXT_AUDIO_CDAC;
case CHECK_LFE:
return as->ext_id & AC97_EXT_AUDIO_LDAC;
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
case CHECK_SPDIF:
return as->ext_id & AC97_EXT_AUDIO_SPDIF;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
case CHECK_HEADPHONES:
return as->caps & AC97_CAPS_HEADPHONES;
case CHECK_TONE:
return as->caps & AC97_CAPS_TONECTRL;
case CHECK_MIC:
return as->caps & AC97_CAPS_MICIN;
case CHECK_LOUDNESS:
return as->caps & AC97_CAPS_LOUDNESS;
case CHECK_3D:
return AC97_CAPS_ENHANCEMENT(as->caps) != 0;
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
case CHECK_LINE1:
return as->ext_mid & AC97_EXT_MODEM_LINE1;
case CHECK_LINE2:
return as->ext_mid & AC97_EXT_MODEM_LINE2;
case CHECK_HANDSET:
return as->ext_mid & AC97_EXT_MODEM_HANDSET;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
default:
printf("%s: internal error: feature=%d\n", __func__, check);
return 0;
}
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_setup_source_info(struct ac97_softc *as)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
int idx, ouridx;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
struct ac97_source_info *si, *si2;
implement auto-detection of volume resolutions
2006-08-23 15:24:07 +04:00
uint16_t value1, value2, value3;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
for (idx = 0, ouridx = 0; idx < SOURCE_INFO_SIZE(as); idx++) {
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
si = &as->source_info[ouridx];
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
if (as->type == AC97_CODEC_TYPE_MODEM) {
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
memcpy(si, &modem_source_info[idx], sizeof(*si));
} else {
memcpy(si, &audio_source_info[idx], sizeof(*si));
}
implement auto-detection of volume resolutions
2006-08-23 15:24:07 +04:00
if (!ac97_check_capability(as, si->req_feature))
continue;
if (si->checkbits) {
/* read the register value */
ac97_read(as, si->reg, &value1);
/* write 0b100000 */
value2 = value1 & 0xffc0;
value2 |= 0x20;
ac97_write(as, si->reg, value2);
/* verify */
ac97_read(as, si->reg, &value3);
if (value2 == value3) {
si->bits = 6;
} else {
si->bits = 5;
}
DPRINTF(("%s: register=%02x bits=%d\n",
__func__, si->reg, si->bits));
ac97_write(as, si->reg, value1);
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
switch (si->type) {
case AUDIO_MIXER_CLASS:
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
si->mixer_class = ouridx;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
ouridx++;
break;
case AUDIO_MIXER_VALUE:
/* Todo - Test to see if it works */
ouridx++;
/* Add an entry for mute, if necessary */
if (si->mute) {
si = &as->source_info[ouridx];
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
if (as->type == AC97_CODEC_TYPE_MODEM)
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
memcpy(si, &modem_source_info[idx],
sizeof(*si));
else
memcpy(si, &audio_source_info[idx],
sizeof(*si));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
si->qualifier = AudioNmute;
si->type = AUDIO_MIXER_ENUM;
si->info = &ac97_on_off;
si->info_size = sizeof(ac97_on_off);
si->bits = 1;
si->ofs = 15;
si->mute = 0;
si->polarity = 0;
ouridx++;
}
break;
case AUDIO_MIXER_ENUM:
/* Todo - Test to see if it works */
ouridx++;
break;
default:
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_error ("ac97: shouldn't get here\n");
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
break;
}
}
as->num_source_info = ouridx;
for (idx = 0; idx < as->num_source_info; idx++) {
int idx2, previdx;
si = &as->source_info[idx];
/* Find mixer class */
for (idx2 = 0; idx2 < as->num_source_info; idx2++) {
si2 = &as->source_info[idx2];
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
if (si2->type == AUDIO_MIXER_CLASS &&
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
ac97_str_equal(si->class,
si2->class)) {
si->mixer_class = idx2;
}
}
/* Setup prev and next pointers */
if (si->prev != 0)
continue;
if (si->qualifier)
continue;
si->prev = AUDIO_MIXER_LAST;
previdx = idx;
for (idx2 = 0; idx2 < as->num_source_info; idx2++) {
if (idx2 == idx)
continue;
si2 = &as->source_info[idx2];
if (!si2->prev &&
ac97_str_equal(si->class, si2->class) &&
ac97_str_equal(si->device, si2->device)) {
as->source_info[previdx].next = idx2;
as->source_info[idx2].prev = previdx;
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
previdx = idx2;
}
}
as->source_info[previdx].next = AUDIO_MIXER_LAST;
}
}
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
/* backward compatibility */
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
int
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
ac97_attach(struct ac97_host_if *host_if, device_t sc_dev, kmutex_t *lk)
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
{
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
return ac97_attach_type(host_if, sc_dev, AC97_CODEC_TYPE_AUDIO, lk);
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
}
int
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
ac97_attach_type(struct ac97_host_if *host_if, device_t sc_dev, int type, kmutex_t *lk)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
struct ac97_softc *as;
int error, i, j;
Check power states after codec reset. This change fixes a resume problem on some boards. Patch provided by Joachim Thiemann in PR kern/26457
2004-08-20 18:36:13 +04:00
uint32_t id;
uint16_t id1, id2;
uint16_t extstat, rate;
uint16_t val;
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 16:39:59 +04:00
mixer_ctrl_t ctl;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
void (*initfunc)(struct ac97_softc *);
Use bitmask_snprintf() for printing ext id features.
2003-09-07 15:27:32 +04:00
#define FLAGBUFLEN 140
char flagbuf[FLAGBUFLEN];
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
initfunc = NULL;
Call malloc(9) with M_ZERO flag instead of memset() after malloc().
2002-01-12 19:03:11 +03:00
as = malloc(sizeof(struct ac97_softc), M_DEVBUF, M_WAITOK|M_ZERO);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Clean up attachment printing a bit.
1999-11-02 08:41:27 +03:00
if (as == NULL)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return ENOMEM;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
as->codec_if.vtbl = &ac97civ;
as->host_if = host_if;
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
as->type = type;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
as->lock = lk;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
if ((error = host_if->attach(host_if->arg, &as->codec_if))) {
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
free(as, M_DEVBUF);
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return error;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
if (host_if->reset != NULL) {
if ((error = host_if->reset(host_if->arg))) {
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
free(as, M_DEVBUF);
return error;
}
ac97_host_if::reset() returns non-zero value if codec reset fails, and ac97 is not attached in that case. PR: kern/26973
2004-09-22 16:20:24 +04:00
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
if (host_if->flags)
as->host_flags = host_if->flags(host_if->arg);
Add a heuristic to test if an audio CODEC's AC97_REG_POWER register supports the AC97_POWER_ANL bit. The heuristic simply checks if AC97_REG_POWER's AC97_POWER_MIXER bit can be set, implying the CODEC can control power to its mixer. If the bit reads back as zero after we set it, assume ANL is reserved. Without this patch, some CODECs (e.g. Philips UCB1400) will experience long delays during attach and resume while the driver waits for a bit which will never set. Thanks to jmcneill@ for reviewing this WRT AC97 modem power control.
2005-05-11 17:13:11 +04:00
/*
* Assume codec has all four power bits.
* XXXSCW: what to do for modems?
*/
as->power_all = AC97_POWER_REF | AC97_POWER_ANL | AC97_POWER_DAC |
AC97_POWER_ADC;
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
if (as->type == AC97_CODEC_TYPE_AUDIO) {
host_if->write(host_if->arg, AC97_REG_RESET, 0);
Add a heuristic to test if an audio CODEC's AC97_REG_POWER register supports the AC97_POWER_ANL bit. The heuristic simply checks if AC97_REG_POWER's AC97_POWER_MIXER bit can be set, implying the CODEC can control power to its mixer. If the bit reads back as zero after we set it, assume ANL is reserved. Without this patch, some CODECs (e.g. Philips UCB1400) will experience long delays during attach and resume while the driver waits for a bit which will never set. Thanks to jmcneill@ for reviewing this WRT AC97 modem power control.
2005-05-11 17:13:11 +04:00
/*
* Power-up everything except the analogue mixer.
* If this codec doesn't support analogue mixer power-down,
* AC97_POWER_MIXER will read back as zero.
*/
host_if->write(host_if->arg, AC97_REG_POWER, AC97_POWER_MIXER);
ac97_read(as, AC97_REG_POWER, &val);
if ((val & AC97_POWER_MIXER) == 0) {
/* Codec doesn't support analogue mixer power-down */
as->power_all &= ~AC97_POWER_ANL;
}
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
host_if->write(host_if->arg, AC97_REG_POWER, POWER_EAMP_ON(as));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
for (i = 500000; i >= 0; i--) {
ac97_read(as, AC97_REG_POWER, &val);
Add a heuristic to test if an audio CODEC's AC97_REG_POWER register supports the AC97_POWER_ANL bit. The heuristic simply checks if AC97_REG_POWER's AC97_POWER_MIXER bit can be set, implying the CODEC can control power to its mixer. If the bit reads back as zero after we set it, assume ANL is reserved. Without this patch, some CODECs (e.g. Philips UCB1400) will experience long delays during attach and resume while the driver waits for a bit which will never set. Thanks to jmcneill@ for reviewing this WRT AC97 modem power control.
2005-05-11 17:13:11 +04:00
if ((val & as->power_all) == as->power_all)
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
break;
DELAY(1);
}
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
/* save AC97_REG_POWER so that we can restore it later */
ac97_read(as, AC97_REG_POWER, &as->power_reg);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
} else if (as->type == AC97_CODEC_TYPE_MODEM) {
host_if->write(host_if->arg, AC97_REG_EXT_MODEM_ID, 0);
}
Check power states after codec reset. This change fixes a resume problem on some boards. Patch provided by Joachim Thiemann in PR kern/26457
2004-08-20 18:36:13 +04:00
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
ac97_setup_defaults(as);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
if (as->type == AC97_CODEC_TYPE_AUDIO)
ac97_read(as, AC97_REG_RESET, &as->caps);
Feh, fix st00p1d braino in last.
2000-11-05 08:41:25 +03:00
ac97_read(as, AC97_REG_VENDOR_ID1, &id1);
ac97_read(as, AC97_REG_VENDOR_ID2, &id2);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
id = (id1 << 16) | id2;
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
aprint_normal_dev(sc_dev, "ac97: ");
Clean up attachment printing a bit.
1999-11-02 08:41:27 +03:00
for (i = 0; ; i++) {
if (ac97codecid[i].id == 0) {
Print the PnP id of unknown codecs.
1999-11-20 04:16:15 +03:00
char pnp[4];
Add the Avance Logic ALC203 code, found on e.g. alix3d3 boards.
2011-11-27 19:08:04 +04:00
Recognize the Crystal CS4297A codec, and add a couple of macros to manipulate AC97 codec IDs.
2000-04-26 04:00:41 +04:00
AC97_GET_CODEC_ID(id, pnp);
Print the PnP id of unknown codecs.
1999-11-20 04:16:15 +03:00
#define ISASCII(c) ((c) >= ' ' && (c) < 0x7f)
if (ISASCII(pnp[0]) && ISASCII(pnp[1]) &&
ISASCII(pnp[2]))
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_normal("%c%c%c%d",
pnp[0], pnp[1], pnp[2], pnp[3]);
Print the PnP id of unknown codecs.
1999-11-20 04:16:15 +03:00
else
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_normal("unknown (0x%08x)", id);
Make ID printing a little more robust in case of problems reading AC97 registers.
2000-06-06 21:25:52 +04:00
break;
}
Add 'mask' member to the struct ac97_codecid. Cirrus Logic Crystal codec uses lower three bits in ID for a revision number. We should mask an actual ID value before matching to this table.
2002-10-09 16:06:17 +04:00
if (ac97codecid[i].id == (id & ac97codecid[i].mask)) {
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_normal("%s", ac97codecid[i].name);
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
if (ac97codecid[i].mask == AC97_VENDOR_ID_MASK) {
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_normal(" (0x%08x)", id);
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
}
initfunc = ac97codecid[i].init;
Clean up attachment printing a bit.
1999-11-02 08:41:27 +03:00
break;
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_normal(" codec; ");
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
for (i = j = 0; i < 10; i++) {
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
if (as->caps & (1 << i)) {
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
aprint_normal("%s%s", j ? ", " : "", ac97feature[i]);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
j++;
}
}
Use aprint_*().
2003-01-31 03:26:25 +03:00
aprint_normal("%s%s\n", j ? ", " : "",
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ac97enhancement[AC97_CAPS_ENHANCEMENT(as->caps)]);
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
as->ac97_clock = AC97_STANDARD_CLOCK;
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
if (as->type == AC97_CODEC_TYPE_AUDIO) {
ac97_read(as, AC97_REG_EXT_AUDIO_ID, &as->ext_id);
if (as->ext_id != 0) {
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
/* Print capabilities */
replace bitmask_snprintf(9) with snprintb(3)
2008-12-17 01:35:21 +03:00
snprintb(flagbuf, sizeof(flagbuf),
"\20\20SECONDARY10\17SECONDARY01"
"\14AC97_23\13AC97_22\12AMAP\11LDAC\10SDAC"
"\7CDAC\4VRM\3SPDIF\2DRA\1VRA", as->ext_id);
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
aprint_normal_dev(sc_dev, "ac97: ext id %s\n",
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
flagbuf);
/* Print unusual settings */
if (as->ext_id & AC97_EXT_AUDIO_DSA_MASK) {
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
aprint_normal_dev(sc_dev, "ac97: Slot assignment: ");
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
switch (as->ext_id & AC97_EXT_AUDIO_DSA_MASK) {
case AC97_EXT_AUDIO_DSA01:
aprint_normal("7&8, 6&9, 10&11.\n");
break;
case AC97_EXT_AUDIO_DSA10:
aprint_normal("6&9, 10&11, 3&4.\n");
break;
case AC97_EXT_AUDIO_DSA11:
aprint_normal("10&11, 3&4, 7&8.\n");
break;
}
Use bitmask_snprintf() for printing ext id features.
2003-09-07 15:27:32 +04:00
}
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
if (as->host_flags & AC97_HOST_INVERTED_EAMP) {
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
aprint_normal_dev(sc_dev, "ac97: using inverted "
"AC97_POWER_EAMP bit\n");
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
}
Add some constant symbols for AC97 registers and values based on OpenBSD. Rename some symbols to sync with OpenBSD: AC97_REG_EXTENDED_ID -> AC97_REG_EXT_AUDIO_ID AC97_REG_EXTENDED_STATUS -> AC97_REG_EXT_AUDIO_CTRL AC97_CODEC_DOES_VRA/AC97_ENAB_VRA -> AC97_EXT_AUDIO_VRA AC97_CODEC_DOES_MICVRA/AC97_ENAB_MICVRA -> AC97_EXT_AUDIO_VRM ac97feature: "mic channel" -> "dedicated mic channel" ac97_attach(): print extended capabilities; VRA, DRA, SPDIF, VRM, CDAC, SDAC, LDAC.
2002-10-06 20:33:35 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
/* Enable and disable features */
ac97_read(as, AC97_REG_EXT_AUDIO_CTRL, &extstat);
extstat &= ~AC97_EXT_AUDIO_DRA;
if (as->ext_id & AC97_EXT_AUDIO_LDAC)
extstat |= AC97_EXT_AUDIO_LDAC;
if (as->ext_id & AC97_EXT_AUDIO_SDAC)
extstat |= AC97_EXT_AUDIO_SDAC;
if (as->ext_id & AC97_EXT_AUDIO_CDAC)
extstat |= AC97_EXT_AUDIO_CDAC;
if (as->ext_id & AC97_EXT_AUDIO_VRM)
extstat |= AC97_EXT_AUDIO_VRM;
if (as->ext_id & AC97_EXT_AUDIO_SPDIF) {
/* Output the same data as DAC to SPDIF output */
extstat &= ~AC97_EXT_AUDIO_SPSA_MASK;
extstat |= AC97_EXT_AUDIO_SPSA34;
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
ac97_read(as, AC97_REG_SPDIF_CTRL, &val);
val = (val & ~AC97_SPDIF_SPSR_MASK)
| AC97_SPDIF_SPSR_48K;
ac97_write(as, AC97_REG_SPDIF_CTRL, val);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
}
if (as->ext_id & AC97_EXT_AUDIO_VRA)
extstat |= AC97_EXT_AUDIO_VRA;
ac97_write(as, AC97_REG_EXT_AUDIO_CTRL, extstat);
if (as->ext_id & AC97_EXT_AUDIO_VRA) {
/* VRA should be enabled. */
/* so it claims to do variable rate, let's make sure */
ac97_write(as, AC97_REG_PCM_FRONT_DAC_RATE,
44100);
ac97_read(as, AC97_REG_PCM_FRONT_DAC_RATE,
&rate);
if (rate != 44100) {
/* We can't believe ext_id */
as->ext_id = 0;
Add the Avance Logic ALC203 code, found on e.g. alix3d3 boards.
2011-11-27 19:08:04 +04:00
aprint_normal_dev(sc_dev,
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
"Ignore these capabilities.\n");
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
}
/* restore the default value */
ac97_write(as, AC97_REG_PCM_FRONT_DAC_RATE,
AC97_SINGLE_RATE);
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
}
}
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
} else if (as->type == AC97_CODEC_TYPE_MODEM) {
Change the rest of the sysctl subsystem to use const consistently. The __UNCONST macro is now used only where necessary and the RW macros are gone. Most of the changes here are consumers of the sysctl_createv(9) interface that now takes a pair of const pointers which used not to be.
2005-06-20 06:49:18 +04:00
const struct sysctlnode *node;
const struct sysctlnode *node_line1;
const struct sysctlnode *node_line2;
- add missing const - fix variable shadowing - remove unneeded casts
2005-05-30 08:43:46 +04:00
uint16_t xrate = 8000;
uint16_t xval, reg;
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
int err;
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
ac97_read(as, AC97_REG_EXT_MODEM_ID, &as->ext_mid);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
if (as->ext_mid == 0 || as->ext_mid == 0xffff) {
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
aprint_normal_dev(sc_dev, "no modem codec found\n");
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
return ENXIO;
}
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
as->type = AC97_CODEC_TYPE_MODEM;
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
/* Print capabilities */
replace bitmask_snprintf(9) with snprintb(3)
2008-12-17 01:35:21 +03:00
snprintb(flagbuf, sizeof(flagbuf),
"\20\5CID2\4CID1\3HANDSET\2LINE2\1LINE1", as->ext_mid);
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
aprint_normal_dev(sc_dev, "ac97: ext mid %s",
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
flagbuf);
aprint_normal(", %s codec\n",
(as->ext_mid & 0xc000) == 0 ?
"primary" : "secondary");
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
/* Setup modem and sysctls */
err = sysctl_createv(&as->log, 0, NULL, NULL, 0, CTLTYPE_NODE,
"hw", NULL, NULL, 0, NULL, 0, CTL_HW,
CTL_EOL);
if (err != 0)
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
goto setup_modem;
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
err = sysctl_createv(&as->log, 0, NULL, &node, 0,
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
CTLTYPE_NODE, device_xname(sc_dev), NULL,
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
NULL, 0, NULL, 0, CTL_HW, CTL_CREATE,
CTL_EOL);
if (err != 0)
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
goto setup_modem;
setup_modem:
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
/* reset */
ac97_write(as, AC97_REG_EXT_MODEM_ID, 1);
/* program rates */
- add missing const - fix variable shadowing - remove unneeded casts
2005-05-30 08:43:46 +04:00
xval = 0xff00 & ~AC97_EXT_MODEM_CTRL_PRA;
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
if (as->ext_mid & AC97_EXT_MODEM_LINE1) {
- add missing const - fix variable shadowing - remove unneeded casts
2005-05-30 08:43:46 +04:00
ac97_write(as, AC97_REG_LINE1_RATE, xrate);
xval &= ~(AC97_EXT_MODEM_CTRL_PRC |
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
AC97_EXT_MODEM_CTRL_PRD);
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
}
if (as->ext_mid & AC97_EXT_MODEM_LINE2) {
- add missing const - fix variable shadowing - remove unneeded casts
2005-05-30 08:43:46 +04:00
ac97_write(as, AC97_REG_LINE2_RATE, xrate);
xval &= ~(AC97_EXT_MODEM_CTRL_PRE |
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
AC97_EXT_MODEM_CTRL_PRF);
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
}
if (as->ext_mid & AC97_EXT_MODEM_HANDSET) {
- add missing const - fix variable shadowing - remove unneeded casts
2005-05-30 08:43:46 +04:00
ac97_write(as, AC97_REG_HANDSET_RATE, xrate);
xval &= ~(AC97_EXT_MODEM_CTRL_PRG |
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
AC97_EXT_MODEM_CTRL_PRH);
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
}
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
/* power-up everything */
ac97_write(as, AC97_REG_EXT_MODEM_CTRL, 0);
* Reduce timeout for codec powerup * Return ENXIO from ac97_attach_type if the modem codec fails to power-on. This will prevent broken AC97 modems *cough*Conexant*cough* from giving the impression that they will actually work.
2005-04-13 01:11:43 +04:00
for (i = 5000; i >= 0; i--) {
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
ac97_read(as, AC97_REG_EXT_MODEM_CTRL, &reg);
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
if ((reg & /*XXXval*/0xf) == /*XXXval*/0xf)
break;
DELAY(1);
}
* Reduce timeout for codec powerup * Return ENXIO from ac97_attach_type if the modem codec fails to power-on. This will prevent broken AC97 modems *cough*Conexant*cough* from giving the impression that they will actually work.
2005-04-13 01:11:43 +04:00
if (i <= 0) {
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
* Reduce timeout for codec powerup * Return ENXIO from ac97_attach_type if the modem codec fails to power-on. This will prevent broken AC97 modems *cough*Conexant*cough* from giving the impression that they will actually work.
2005-04-13 01:11:43 +04:00
printf("%s: codec not responding, status=0x%x\n",
use aprint_*_dev and device_xname
2008-04-08 16:07:25 +04:00
device_xname(sc_dev), reg);
* Reduce timeout for codec powerup * Return ENXIO from ac97_attach_type if the modem codec fails to power-on. This will prevent broken AC97 modems *cough*Conexant*cough* from giving the impression that they will actually work.
2005-04-13 01:11:43 +04:00
return ENXIO;
}
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
/* setup sysctls */
if (as->ext_mid & AC97_EXT_MODEM_LINE1) {
ac97_read(as, AC97_REG_GPIO_CFG, &reg);
reg &= ~AC97_GPIO_LINE1_OH;
ac97_write(as, AC97_REG_GPIO_CFG, reg);
ac97_read(as, AC97_REG_GPIO_POLARITY, &reg);
reg &= ~AC97_GPIO_LINE1_OH;
ac97_write(as, AC97_REG_GPIO_POLARITY, reg);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
err = sysctl_createv(&as->log, 0, NULL, &node_line1,
CTLFLAG_READWRITE, CTLTYPE_INT,
"line1",
SYSCTL_DESCR("off-hook line1"),
Add some pre-processor magic to verify that the type of the data item passed to sysctl_createv() actually matches the declared type for the item itself. In the places where the caller specifies a function and a structure address (typically the 'softc') an explicit (void *) cast is now needed. Fixes bugs in sys/dev/acpi/asus_acpi.c sys/dev/bluetooth/bcsp.c sys/kern/vfs_bio.c sys/miscfs/syncfs/sync_subr.c and setting AcpiGbl_EnableAmlDebugObject. (mostly passing the address of a uint64_t when typed as CTLTYPE_INT). I've test built quite a few kernels, but there may be some unfixed MD fallout. Most likely passing &char[] to char *. Also add CTLFLAG_UNSIGNED for unsiged decimals - not set yet.
2012-06-03 01:36:41 +04:00
ac97_sysctl_verify, 0, (void *)as, 0,
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
CTL_HW, node->sysctl_num,
CTL_CREATE, CTL_EOL);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
if (err != 0)
goto sysctl_err;
as->offhook_line1_mib = node_line1->sysctl_num;
}
if (as->ext_mid & AC97_EXT_MODEM_LINE2) {
ac97_read(as, AC97_REG_GPIO_CFG, &reg);
reg &= ~AC97_GPIO_LINE2_OH;
ac97_write(as, AC97_REG_GPIO_CFG, reg);
ac97_read(as, AC97_REG_GPIO_POLARITY, &reg);
reg &= ~AC97_GPIO_LINE2_OH;
ac97_write(as, AC97_REG_GPIO_POLARITY, reg);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
err = sysctl_createv(&as->log, 0, NULL, &node_line2,
CTLFLAG_READWRITE, CTLTYPE_INT,
"line2",
SYSCTL_DESCR("off-hook line2"),
Add some pre-processor magic to verify that the type of the data item passed to sysctl_createv() actually matches the declared type for the item itself. In the places where the caller specifies a function and a structure address (typically the 'softc') an explicit (void *) cast is now needed. Fixes bugs in sys/dev/acpi/asus_acpi.c sys/dev/bluetooth/bcsp.c sys/kern/vfs_bio.c sys/miscfs/syncfs/sync_subr.c and setting AcpiGbl_EnableAmlDebugObject. (mostly passing the address of a uint64_t when typed as CTLTYPE_INT). I've test built quite a few kernels, but there may be some unfixed MD fallout. Most likely passing &char[] to char *. Also add CTLFLAG_UNSIGNED for unsiged decimals - not set yet.
2012-06-03 01:36:41 +04:00
ac97_sysctl_verify, 0, (void *)as, 0,
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
CTL_HW, node->sysctl_num,
CTL_CREATE, CTL_EOL);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
if (err != 0)
goto sysctl_err;
as->offhook_line2_mib = node_line2->sysctl_num;
}
Don't touch AC97_REG_RESET if we're dealing with a modem (modems use AC97_REG_EXT_MODEM_ID instead). Also set the default audio rate to 8000; 12000 was a stupid choice since we don't actually support it in the driver yet.
2005-04-12 21:28:02 +04:00
sysctl_err:
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
* Add support for skipping either the modem or audio AC'97 probes via host_flags: AC97_HOST_SKIP_AUDIO, AC97_HOST_SKIP_MODEM * If we're dealing with a modem codec, print the extended modem capabilities. * Add basic AC'97 modem initialization support. * Add some (but not all) AC'97 modem registers. More will be added later.
2005-04-04 06:08:58 +04:00
ac97_write(as, AC97_REG_GPIO_STICKY, 0xffff);
ac97_write(as, AC97_REG_GPIO_WAKEUP, 0x0);
ac97_write(as, AC97_REG_MISC_AFE, 0x0);
}
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
as->source_info = (as->type == AC97_CODEC_TYPE_MODEM ?
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
as->modem_source_info : as->audio_source_info);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
ac97_setup_source_info(as);
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 16:39:59 +04:00
memset(&ctl, 0, sizeof(ctl));
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/* disable mutes */
for (i = 0; i < 11; i++) {
static struct {
- add missing const - fix variable shadowing - remove unneeded casts
2005-05-30 08:43:46 +04:00
const char *class, *device;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
} d[11] = {
{ AudioCoutputs, AudioNmaster},
{ AudioCoutputs, AudioNheadphone},
{ AudioCoutputs, AudioNsurround},
{ AudioCoutputs, AudioNcenter},
{ AudioCoutputs, AudioNlfe},
{ AudioCinputs, AudioNdac},
{ AudioCinputs, AudioNcd},
{ AudioCinputs, AudioNline},
{ AudioCinputs, AudioNaux},
{ AudioCinputs, AudioNvideo},
{ AudioCrecord, AudioNvolume},
};
ctl.type = AUDIO_MIXER_ENUM;
ctl.un.ord = 0;
ctl.dev = ac97_get_portnum_by_name(&as->codec_if,
d[i].class, d[i].device, AudioNmute);
ac97_mixer_set_port(&as->codec_if, &ctl);
}
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 16:39:59 +04:00
ctl.type = AUDIO_MIXER_ENUM;
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ctl.un.ord = 0;
ctl.dev = ac97_get_portnum_by_name(&as->codec_if, AudioCrecord,
AudioNsource, NULL);
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
ac97_mixer_set_port(&as->codec_if, &ctl);
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 16:39:59 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
/* set a reasonable default volume */
ctl.type = AUDIO_MIXER_VALUE;
ctl.un.value.num_channels = 2;
ctl.un.value.level[AUDIO_MIXER_LEVEL_LEFT] = \
ctl.un.value.level[AUDIO_MIXER_LEVEL_RIGHT] = 127;
ctl.dev = ac97_get_portnum_by_name(&as->codec_if, AudioCoutputs,
AudioNmaster, NULL);
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
ac97_mixer_set_port(&as->codec_if, &ctl);
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ctl.dev = ac97_get_portnum_by_name(&as->codec_if, AudioCoutputs,
AudioNsurround, NULL);
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
ac97_mixer_set_port(&as->codec_if, &ctl);
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ctl.un.value.num_channels = 1;
ctl.dev = ac97_get_portnum_by_name(&as->codec_if, AudioCoutputs,
AudioNcenter, NULL);
ac97_mixer_set_port(&as->codec_if, &ctl);
ctl.dev = ac97_get_portnum_by_name(&as->codec_if, AudioCoutputs,
AudioNlfe, NULL);
Shadow the AC'97 codec registers. This adds two capabilities: * support devices that crash when reading the codec registers; a flags interface is added to the host interface and one flag is defined (AC97_HOST_DONT_READ). * new API (restore_ports) for restoring the user's settings. This can be useful after an APM resume after a suspend to disk. From OpenBSD.
2000-11-04 11:07:14 +03:00
ac97_mixer_set_port(&as->codec_if, &ctl);
Unmute some mixer controls by default. From OpenBSD.
2000-04-28 16:39:59 +04:00
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
if (initfunc != NULL)
initfunc(as);
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
/* restore AC97_REG_POWER */
if (as->type == AC97_CODEC_TYPE_AUDIO)
ac97_write(as, AC97_REG_POWER, as->power_reg);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return 0;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
- nuke __P() - add ac97_codec_if_vtbl::detach()
2004-11-08 17:24:17 +03:00
static void
ac97_detach(struct ac97_codec_if *codec_if)
{
struct ac97_softc *as;
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
- nuke __P() - add ac97_codec_if_vtbl::detach()
2004-11-08 17:24:17 +03:00
ac97_write(as, AC97_REG_POWER, AC97_POWER_IN | AC97_POWER_OUT
| AC97_POWER_MIXER | AC97_POWER_MIXER_VREF
| AC97_POWER_ACLINK | AC97_POWER_CLK | AC97_POWER_AUX
* Add a flag AC97_HOST_INVERTED_EAMP. (kern/18880, kern/24488). * Make reset callback optional; not all devices need it. (port-i386/14260, kern/12603, kern/12723, kern/24957).
2006-04-16 01:18:34 +04:00
| POWER_EAMP_OFF(as));
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
- nuke __P() - add ac97_codec_if_vtbl::detach()
2004-11-08 17:24:17 +03:00
free(as, M_DEVBUF);
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
static void
ac97_lock(struct ac97_codec_if *codec_if)
{
struct ac97_softc *as;
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
as->lock_counter++;
}
static void
ac97_unlock(struct ac97_codec_if *codec_if)
{
struct ac97_softc *as;
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
as->lock_counter--;
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_query_devinfo(struct ac97_codec_if *codec_if, mixer_devinfo_t *dip)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
struct ac97_softc *as;
struct ac97_source_info *si;
const char *name;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
as = (struct ac97_softc *)codec_if;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (dip->index < as->num_source_info) {
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
si = &as->source_info[dip->index];
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
dip->type = si->type;
dip->mixer_class = si->mixer_class;
dip->prev = si->prev;
dip->next = si->next;
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (si->qualifier)
name = si->qualifier;
else if (si->device)
name = si->device;
else if (si->class)
name = si->class;
Fix an uninitialized variable. From Krister Walfridsson <cato@df.lth.se>
2000-03-16 01:41:29 +03:00
else
name = 0;
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (name)
strcpy(dip->label.name, name);
bcopy -> memcpy
2001-07-07 19:56:07 +04:00
memcpy(&dip->un, si->info, si->info_size);
Set the delta for the particular source so telling mixerctl to decrease the volume (using --) adjusts it far enough to stick.
2001-04-29 06:47:25 +04:00
/* Set the delta for volume sources */
if (dip->type == AUDIO_MIXER_VALUE)
dip->un.v.delta = 1 << (8 - si->bits);
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return 0;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return ENXIO;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_mixer_set_port(struct ac97_codec_if *codec_if, mixer_ctrl_t *cp)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
struct ac97_softc *as;
struct ac97_source_info *si;
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint16_t mask;
uint16_t val, newval;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
int error;
Replace the Mach-derived boolean_t type with the C99 bool type. A future commit will replace use of TRUE and FALSE with true and false.
2007-02-22 01:59:35 +03:00
bool spdif;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (cp->dev < 0 || cp->dev >= as->num_source_info)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
si = &as->source_info[cp->dev];
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
if (cp->type == AUDIO_MIXER_CLASS || cp->type != si->type)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
spdif = si->req_feature == CHECK_SPDIF && si->reg == AC97_REG_EXT_AUDIO_CTRL;
if (spdif && as->lock_counter >= 0) {
/* When the value of lock_counter is the default 0,
* it is not allowed to change the SPDIF mode. */
return EBUSY;
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Feh, fix st00p1d braino in last.
2000-11-05 08:41:25 +03:00
ac97_read(as, si->reg, &val);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
DPRINTFN(5, ("read(%x) = %x\n", si->reg, val));
mask = (1 << si->bits) - 1;
switch (cp->type) {
case AUDIO_MIXER_ENUM:
if (cp->un.ord > mask || cp->un.ord < 0)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
newval = (cp->un.ord << si->ofs);
if (si->reg == AC97_REG_RECORD_SELECT) {
newval |= (newval << (8 + si->ofs));
mask |= (mask << 8);
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
mask = mask << si->ofs;
} else if (si->reg == AC97_REG_SURR_MASTER) {
newval = cp->un.ord ? 0x8080 : 0x0000;
mask = 0x8080;
} else
mask = mask << si->ofs;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
break;
case AUDIO_MIXER_VALUE:
{
constify
2001-01-18 23:28:15 +03:00
const struct audio_mixer_value *value = si->info;
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint16_t l, r, ol, or;
Change the way of setting a port value so that a change too small to fit in the number of bits used for the port still does something. This fixes PR pkg/18741 for ac97-based hardware. Other audio drivers might need a similar fix.
2003-09-29 02:24:09 +04:00
int deltal, deltar;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if ((cp->un.value.num_channels <= 0) ||
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
(cp->un.value.num_channels > value->num_channels))
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (cp->un.value.num_channels == 1) {
l = r = cp->un.value.level[AUDIO_MIXER_LEVEL_MONO];
} else {
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right mixer channels to be swapped (required for hardware that has wiring reversed).
2001-01-10 02:14:25 +03:00
if (!(as->host_flags & AC97_HOST_SWAPPED_CHANNELS)) {
l = cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT];
r = cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT];
} else { /* left/right is reversed here */
r = cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT];
l = cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT];
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
if (!si->polarity) {
l = 255 - l;
r = 255 - r;
}
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
Change the way of setting a port value so that a change too small to fit in the number of bits used for the port still does something. This fixes PR pkg/18741 for ac97-based hardware. Other audio drivers might need a similar fix.
2003-09-29 02:24:09 +04:00
ol = (val >> (8+si->ofs)) & mask;
or = (val >> si->ofs) & mask;
deltal = (ol << (8 - si->bits)) - l;
deltar = (or << (8 - si->bits)) - r;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
l = l >> (8 - si->bits);
r = r >> (8 - si->bits);
Change the way of setting a port value so that a change too small to fit in the number of bits used for the port still does something. This fixes PR pkg/18741 for ac97-based hardware. Other audio drivers might need a similar fix.
2003-09-29 02:24:09 +04:00
if (deltal && ol == l)
l += (deltal > 0) ? (l ? -1 : 0) : (l < mask ? 1 : 0);
if (deltar && or == r)
r += (deltar > 0) ? (r ? -1 : 0) : (r < mask ? 1 : 0);
newval = ((r & mask) << si->ofs);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (value->num_channels == 2) {
Change the way of setting a port value so that a change too small to fit in the number of bits used for the port still does something. This fixes PR pkg/18741 for ac97-based hardware. Other audio drivers might need a similar fix.
2003-09-29 02:24:09 +04:00
newval = newval | ((l & mask) << (si->ofs+8));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
mask |= (mask << 8);
}
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
mask = mask << si->ofs;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
break;
}
default:
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Feh, fix st00p1d braino in last.
2000-11-05 08:41:25 +03:00
error = ac97_write(as, si->reg, (val & ~mask) | newval);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (error)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return error;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
add capability to support for S/PDIF. If a codec supports for AC'97 S/PDIF, it will have an mixer "spdif.enable." However, we can't change the value of the mixer without AC'97 host driver's support.
2006-07-26 18:44:33 +04:00
if (spdif && as->host_if->spdif_event != NULL) {
DPRINTF(("%s: call spdif_event(%d)\n", __func__, cp->un.ord));
as->host_if->spdif_event(as->host_if->arg, cp->un.ord);
}
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return 0;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_get_portnum_by_name(struct ac97_codec_if *codec_if, const char *class,
const char *device, const char *qualifier)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
struct ac97_softc *as;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
int idx;
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
for (idx = 0; idx < as->num_source_info; idx++) {
struct ac97_source_info *si = &as->source_info[idx];
if (ac97_str_equal(class, si->class) &&
ac97_str_equal(device, si->device) &&
ac97_str_equal(qualifier, si->qualifier))
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return idx;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return -1;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
ac97_mixer_get_port(struct ac97_codec_if *codec_if, mixer_ctrl_t *cp)
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
{
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
struct ac97_softc *as;
struct ac97_source_info *si;
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint16_t mask;
uint16_t val;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
si = &as->source_info[cp->dev];
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (cp->dev < 0 || cp->dev >= as->num_source_info)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (cp->type != si->type)
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
Feh, fix st00p1d braino in last.
2000-11-05 08:41:25 +03:00
ac97_read(as, si->reg, &val);
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
DPRINTFN(5, ("read(%x) = %x\n", si->reg, val));
mask = (1 << si->bits) - 1;
switch (cp->type) {
case AUDIO_MIXER_ENUM:
cp->un.ord = (val >> si->ofs) & mask;
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
DPRINTFN(4, ("AUDIO_MIXER_ENUM: %x %d %x %d\n",
val, si->ofs, mask, cp->un.ord));
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
break;
case AUDIO_MIXER_VALUE:
{
constify
2001-01-18 23:28:15 +03:00
const struct audio_mixer_value *value = si->info;
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
uint16_t l, r;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if ((cp->un.value.num_channels <= 0) ||
Add codec IDs for AD1981B, STAC9750/51, and STAC9766/67. Whitespace.
2002-11-06 16:41:22 +03:00
(cp->un.value.num_channels > value->num_channels))
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
if (value->num_channels == 1) {
l = r = (val >> si->ofs) & mask;
} else {
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right mixer channels to be swapped (required for hardware that has wiring reversed).
2001-01-10 02:14:25 +03:00
if (!(as->host_flags & AC97_HOST_SWAPPED_CHANNELS)) {
l = (val >> (si->ofs + 8)) & mask;
Fix LR contrary problem of mixer and record gain polarity problem. The change is based on the patches in PR kern/12878 by Zdenek Salvet and PR kern/18901 by SUNAKAWA Hirokatsu.
2002-11-06 19:58:37 +03:00
r = (val >> si->ofs) & mask;
} else { /* host has reversed channels */
r = (val >> (si->ofs + 8)) & mask;
l = (val >> si->ofs) & mask;
Add new AC97_HOST_SWAPPED_CHANNELS host flag that causes left and right mixer channels to be swapped (required for hardware that has wiring reversed).
2001-01-10 02:14:25 +03:00
}
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
l = (l << (8 - si->bits));
r = (r << (8 - si->bits));
if (!si->polarity) {
l = 255 - l;
r = 255 - r;
}
/* The EAP driver averages l and r for stereo
channels that are requested in MONO mode. Does this
make sense? */
if (cp->un.value.num_channels == 1) {
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] = l;
} else if (cp->un.value.num_channels == 2) {
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT] = l;
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] = r;
}
break;
}
default:
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return EINVAL;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Cosmetic changes - ANSIfy - no argument names in prototypes - variable declaration with initialization
2003-11-22 08:40:48 +03:00
return 0;
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 17:18:02 +04:00
}
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
ac97_set_rate(struct ac97_codec_if *codec_if, int target, u_int *rate)
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
{
struct ac97_softc *as;
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
u_int value;
uint16_t ext_stat;
uint16_t actual;
uint16_t power;
uint16_t power_bit;
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
If the codec is fixed-rate, ac97_set_rate() returns 48kHz.
2002-10-08 16:33:34 +04:00
if (target == AC97_REG_PCM_MIC_ADC_RATE) {
if (!(as->ext_id & AC97_EXT_AUDIO_VRM)) {
*rate = AC97_SINGLE_RATE;
return 0;
}
} else {
if (!(as->ext_id & AC97_EXT_AUDIO_VRA)) {
*rate = AC97_SINGLE_RATE;
return 0;
}
}
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
value = *rate * AC97_STANDARD_CLOCK / as->ac97_clock;
ext_stat = 0;
/*
* PCM_FRONT_DAC_RATE/PCM_SURR_DAC_RATE/PCM_LFE_DAC_RATE
* Check VRA, DRA
* PCM_LR_ADC_RATE
* Check VRA
* PCM_MIC_ADC_RATE
* Check VRM
*/
switch (target) {
case AC97_REG_PCM_FRONT_DAC_RATE:
case AC97_REG_PCM_SURR_DAC_RATE:
case AC97_REG_PCM_LFE_DAC_RATE:
power_bit = AC97_POWER_OUT;
if (!(as->ext_id & AC97_EXT_AUDIO_VRA)) {
*rate = AC97_SINGLE_RATE;
return 0;
}
if (as->ext_id & AC97_EXT_AUDIO_DRA) {
ac97_read(as, AC97_REG_EXT_AUDIO_CTRL, &ext_stat);
if (value > 0x1ffff) {
return EINVAL;
} else if (value > 0xffff) {
/* Enable DRA */
ext_stat |= AC97_EXT_AUDIO_DRA;
ac97_write(as, AC97_REG_EXT_AUDIO_CTRL, ext_stat);
value /= 2;
} else {
/* Disable DRA */
ext_stat &= ~AC97_EXT_AUDIO_DRA;
ac97_write(as, AC97_REG_EXT_AUDIO_CTRL, ext_stat);
}
} else {
if (value > 0xffff)
return EINVAL;
}
break;
case AC97_REG_PCM_LR_ADC_RATE:
power_bit = AC97_POWER_IN;
if (!(as->ext_id & AC97_EXT_AUDIO_VRA)) {
*rate = AC97_SINGLE_RATE;
return 0;
}
if (value > 0xffff)
return EINVAL;
break;
case AC97_REG_PCM_MIC_ADC_RATE:
power_bit = AC97_POWER_IN;
if (!(as->ext_id & AC97_EXT_AUDIO_VRM)) {
*rate = AC97_SINGLE_RATE;
return 0;
}
if (value > 0xffff)
return EINVAL;
break;
default:
printf("%s: Unknown register: 0x%x\n", __func__, target);
return EINVAL;
}
ac97_read(as, AC97_REG_POWER, &power);
ac97_write(as, AC97_REG_POWER, power | power_bit);
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
ac97_write(as, target, (uint16_t)value);
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
ac97_read(as, target, &actual);
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
actual = (uint32_t)actual * as->ac97_clock / AC97_STANDARD_CLOCK;
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
ac97_write(as, AC97_REG_POWER, power);
if (ext_stat & AC97_EXT_AUDIO_DRA) {
*rate = actual * 2;
} else {
*rate = actual;
}
return 0;
}
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static void
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
ac97_set_clock(struct ac97_codec_if *codec_if, unsigned int clock)
{
struct ac97_softc *as;
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
as->ac97_clock = clock;
}
merge kent-audio1 branch, which introduces audio filter pipeline to the MI audio framework Summary of changes: * struct audio_params - remove sw_code, factor, factor_denom, hw_sample_rate, hw_encoding ,hw_precision, and hw_channels. Conversion information is conveyed by stream_filter_list_t. - change the type of sample_rate: u_long -> u_int - add `validbits,' which represents the valid data size in precision bits. It is required in order to distinguish 24/32bit from 24/24bit or 32/32bit. * audio_hw_if - add two parameters to set_params() stream_filter_list_t *pfil, stream_filter_list *rfil A HW driver should set filter recipes for requested formats - constify audio_params parameters of trigger_output() and trigger_input(). They represent audio formats for the hardware. - make open() and close() optional - add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters to round_blocksize() * sw_code is replaced with stream_filter_t. stream_filer_t converts audio data in an input buffer and writes into another output buffer unlike sw_code, which converts data in single buffer. converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c, dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are reimplemented as stream_filter_t * MI audio - audiosetinfo() builds filter pipelines from stream_filter_list_t filled by audio_hw_if::set_params() - audiosetinfo() returns with EINVAL if mmapped and set_params() requests filters - audio_write(), audio_pint(), and audio_rint() invoke a filter pipeline. - ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS, AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for AUDIO_GETINFO handle values for a buffer nearest to userland. * add `struct device *' parameter to ac97_attach() * all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
static uint16_t
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
ac97_get_extcaps(struct ac97_codec_if *codec_if)
{
struct ac97_softc *as;
as = (struct ac97_softc *)codec_if;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Add IDs for YMF743-S and YMF753-S. ac97_attach(): Enable VRA/VRM if the codec is capable of them. The struct ac97_softc keeps the clock of the codec, the basic features flag (the value of AC97_REG_RESET), and the extended features flag (the value of AC97_REG_EXT_AUDIO_ID). ac97_codec_if: Add get_extcaps(), set_rate(), and set_clock() methods.
2002-10-08 13:19:44 +04:00
return as->ext_id;
}
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
Use ANSI function decls and more use of static.
2004-08-24 04:53:28 +04:00
static int
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ac97_add_port(struct ac97_softc *as, const struct ac97_source_info *src)
{
struct ac97_source_info *si;
int ouridx, idx;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
if ((as->type == AC97_CODEC_TYPE_AUDIO &&
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
as->num_source_info >= AUDIO_MAX_SOURCES) ||
Add ac97_attach_type(), to allow the hw driver to skip probes for audio or modem devices. ac97_attach now calls ac97_attach_type() with AC97_CODEC_TYPE_AUDIO, for backwords compatibility.
2005-04-11 22:26:48 +04:00
(as->type == AC97_CODEC_TYPE_MODEM &&
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
as->num_source_info >= MODEM_MAX_SOURCES)) {
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
printf("%s: internal error: increase MAX_SOURCES in %s\n",
__func__, __FILE__);
return -1;
}
if (!ac97_check_capability(as, src->req_feature))
return -1;
ouridx = as->num_source_info;
si = &as->source_info[ouridx];
memcpy(si, src, sizeof(*si));
switch (si->type) {
case AUDIO_MIXER_CLASS:
case AUDIO_MIXER_VALUE:
printf("%s: adding class/value is not supported yet.\n",
__func__);
return -1;
case AUDIO_MIXER_ENUM:
break;
default:
printf("%s: unknown type: %d\n", __func__, si->type);
return -1;
}
as->num_source_info++;
si->mixer_class = ac97_get_portnum_by_name(&as->codec_if, si->class,
NULL, NULL);
/* Find the root of the device */
idx = ac97_get_portnum_by_name(&as->codec_if, si->class,
si->device, NULL);
/* Find the last item */
while (as->source_info[idx].next != AUDIO_MIXER_LAST)
idx = as->source_info[idx].next;
/* Append */
as->source_info[idx].next = ouridx;
si->prev = idx;
si->next = AUDIO_MIXER_LAST;
return 0;
}
Add AD1981-specific initialization. The patch provided by Lars Heideker. PR: kern/20368
2003-06-13 09:31:29 +04:00
/**
* Codec-dependent initialization
*/
Correct flag names of AD1980
2003-09-08 17:58:21 +04:00
#define AD1980_REG_MISC 0x76
AD1888 support. PR kern/25949
2004-08-07 21:37:31 +04:00
#define AD1980_MISC_MBG0 0x0001 /* 0 1888/1980/1981 /1985 */
#define AD1980_MISC_MBG1 0x0002 /* 1 1888/1980/1981 /1985 */
#define AD1980_MISC_VREFD 0x0004 /* 2 1888/1980/1981 /1985 */
#define AD1980_MISC_VREFH 0x0008 /* 3 1888/1980/1981 /1985 */
#define AD1980_MISC_SRU 0x0010 /* 4 1888/1980 /1985 */
#define AD1980_MISC_LOSEL 0x0020 /* 5 1888/1980/1981 /1985 */
#define AD1980_MISC_2CMIC 0x0040 /* 6 1980/1981B/1985 */
#define AD1980_MISC_SPRD 0x0080 /* 7 1888/1980 /1985 */
#define AD1980_MISC_DMIX0 0x0100 /* 8 1888/1980 /1985 */
#define AD1980_MISC_DMIX1 0x0200 /* 9 1888/1980 /1985 */
#define AD1980_MISC_HPSEL 0x0400 /*10 1888/1980 /1985 */
#define AD1980_MISC_CLDIS 0x0800 /*11 1888/1980 /1985 */
#define AD1980_MISC_LODIS 0x1000 /*12 1888/1980/1981 /1985 */
#define AD1980_MISC_MSPLT 0x2000 /*13 1888/1980/1981 /1985 */
#define AD1980_MISC_AC97NC 0x4000 /*14 1888/1980 /1985 */
#define AD1980_MISC_DACZ 0x8000 /*15 1888/1980/1981 /1985 */
Correct flag names of AD1980
2003-09-08 17:58:21 +04:00
#define AD1981_REG_MISC 0x76
AD1888 support. PR kern/25949
2004-08-07 21:37:31 +04:00
#define AD1981_MISC_MADST 0x0010 /* 4 */
#define AD1981A_MISC_MADPD 0x0040 /* 6 */
#define AD1981B_MISC_MADPD 0x0080 /* 7 */
#define AD1981_MISC_FMXE 0x0200 /* 9 */
#define AD1981_MISC_DAM 0x0800 /*11 */
Add AD1981-specific initialization. The patch provided by Lars Heideker. PR: kern/20368
2003-06-13 09:31:29 +04:00
static void
AD1985 codec needs the same quirk as AD1980. The patch was provided by Lars Heidieker.
2003-11-22 09:15:29 +03:00
ac97_ad198x_init(struct ac97_softc *as)
Add AD1981-specific initialization. The patch provided by Lars Heideker. PR: kern/20368
2003-06-13 09:31:29 +04:00
{
After initialization of the AD1980 codec, swap master and surround volume controls. As it was before, the master volume control in all mixer programs did nothing. It seems that this codec is not correctly wired in (almost?) all motherboards. Patch by Quentin Garnier. Fixes first part of PR kern/22548.
2003-09-11 13:21:29 +04:00
int i;
AD1888 support. PR kern/25949
2004-08-07 21:37:31 +04:00
uint16_t misc;
Add AD1981-specific initialization. The patch provided by Lars Heideker. PR: kern/20368
2003-06-13 09:31:29 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Correct flag names of AD1980
2003-09-08 17:58:21 +04:00
ac97_read(as, AD1980_REG_MISC, &misc);
ac97_write(as, AD1980_REG_MISC,
misc | AD1980_MISC_LOSEL | AD1980_MISC_HPSEL);
After initialization of the AD1980 codec, swap master and surround volume controls. As it was before, the master volume control in all mixer programs did nothing. It seems that this codec is not correctly wired in (almost?) all motherboards. Patch by Quentin Garnier. Fixes first part of PR kern/22548.
2003-09-11 13:21:29 +04:00
for (i = 0; i < as->num_source_info; i++) {
if (as->source_info[i].type != AUDIO_MIXER_VALUE)
continue;
if (as->source_info[i].reg == AC97_REG_MASTER_VOLUME)
as->source_info[i].reg = AC97_REG_SURR_MASTER;
else if (as->source_info[i].reg == AC97_REG_SURR_MASTER)
as->source_info[i].reg = AC97_REG_MASTER_VOLUME;
}
Add AD1981-specific initialization. The patch provided by Lars Heideker. PR: kern/20368
2003-06-13 09:31:29 +04:00
}
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
#define ALC650_REG_MULTI_CHANNEL_CONTROL 0x6a
#define ALC650_MCC_SLOT_MODIFY_MASK 0xc000
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
#define ALC650_MCC_FRONTDAC_FROM_SPDIFIN 0x2000 /* 13 */
#define ALC650_MCC_SPDIFOUT_FROM_ADC 0x1000 /* 12 */
#define ALC650_MCC_PCM_FROM_SPDIFIN 0x0800 /* 11 */
#define ALC650_MCC_MIC_OR_CENTERLFE 0x0400 /* 10 */
#define ALC650_MCC_LINEIN_OR_SURROUND 0x0200 /* 9 */
#define ALC650_MCC_INDEPENDENT_MASTER_L 0x0080 /* 7 */
#define ALC650_MCC_INDEPENDENT_MASTER_R 0x0040 /* 6 */
#define ALC650_MCC_ANALOG_TO_CENTERLFE 0x0020 /* 5 */
#define ALC650_MCC_ANALOG_TO_SURROUND 0x0010 /* 4 */
#define ALC650_MCC_EXCHANGE_CENTERLFE 0x0008 /* 3 */
#define ALC650_MCC_CENTERLFE_DOWNMIX 0x0004 /* 2 */
#define ALC650_MCC_SURROUND_DOWNMIX 0x0002 /* 1 */
#define ALC650_MCC_LINEOUT_TO_SURROUND 0x0001 /* 0 */
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
static void
ac97_alc650_init(struct ac97_softc *as)
{
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
static const struct ac97_source_info sources[6] = {
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNsurround, "lineinjack",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
ALC650_REG_MULTI_CHANNEL_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 9, 0, 0, 0, CHECK_SURROUND, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AudioCoutputs, AudioNsurround, "mixtofront",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
ALC650_REG_MULTI_CHANNEL_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 1, 0, 0, 0, CHECK_SURROUND, 0, 0, 0, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNcenter, "micjack",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
ALC650_REG_MULTI_CHANNEL_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 10, 0, 0, 0, CHECK_CENTER, 0, 0, 0, },
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
{ AudioCoutputs, AudioNlfe, "micjack",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
ALC650_REG_MULTI_CHANNEL_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 10, 0, 0, 0, CHECK_LFE, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AudioCoutputs, AudioNcenter, "mixtofront",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
ALC650_REG_MULTI_CHANNEL_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 2, 0, 0, 0, CHECK_CENTER, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AudioCoutputs, AudioNlfe, "mixtofront",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
ALC650_REG_MULTI_CHANNEL_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 2, 0, 0, 0, CHECK_LFE, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
};
ac97_add_port(as, &sources[0]);
ac97_add_port(as, &sources[1]);
ac97_add_port(as, &sources[2]);
ac97_add_port(as, &sources[3]);
ac97_add_port(as, &sources[4]);
ac97_add_port(as, &sources[5]);
}
Support UCB1400. It tested on GUMSTIX with audiostix. However GUMSTIX needs more ad-hoc patch.
2009-07-13 16:54:11 +04:00
#define UCB1400_REG_FEATURE_CSR1 0x6a
#define UCB1400_BB(bb) (((bb) & 0xf) << 11)
#define UCB1400_TR(tr) (((tr) & 0x3) << 9)
#define UCB1400_M_MAXIMUM (3 << 7)
#define UCB1400_M_MINIMUM (1 << 7)
#define UCB1400_M_FLAT (0 << 7)
#define UCB1400_HPEN (1 << 6)
#define UCB1400_DE (1 << 5)
#define UCB1400_DC (1 << 4)
#define UCB1400_HIPS (1 << 3)
#define UCB1400_GIEN (1 << 2)
#define UCB1400_OVFL (1 << 0)
#define UCB1400_REG_FEATURE_CSR2 0x6c
#define UCB1400_SMT (1 << 15) /* Must be 0 */
#define UCB1400_SUEV1 (1 << 14) /* Must be 0 */
#define UCB1400_SUEV0 (1 << 13) /* Must be 0 */
#define UCB1400_AVE (1 << 12)
#define UCB1400_AVEN1 (1 << 11) /* Must be 0 */
#define UCB1400_AVEN0 (1 << 10) /* Must be 0 */
#define UCB1400_SLP_ON \
(UCB1400_SLP_PLL | UCB1400_SLP_CODEC)
#define UCB1400_SLP_PLL (2 << 4)
#define UCB1400_SLP_CODEC (1 << 4)
#define UCB1400_SLP_NO (0 << 4)
#define UCB1400_EV2 (1 << 2) /* Must be 0 */
#define UCB1400_EV1 (1 << 1) /* Must be 0 */
#define UCB1400_EV0 (1 << 0) /* Must be 0 */
static void
ac97_ucb1400_init(struct ac97_softc *as)
{
ac97_write(as, UCB1400_REG_FEATURE_CSR1,
UCB1400_HPEN | UCB1400_DC | UCB1400_HIPS | UCB1400_OVFL);
ac97_write(as, UCB1400_REG_FEATURE_CSR2, UCB1400_AVE | UCB1400_SLP_ON);
}
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
#define VT1616_REG_IO_CONTROL 0x5a
#define VT1616_IC_LVL (1 << 15)
#define VT1616_IC_LFECENTER_TO_FRONT (1 << 12)
#define VT1616_IC_SURROUND_TO_FRONT (1 << 11)
#define VT1616_IC_BPDC (1 << 10)
#define VT1616_IC_DC (1 << 9)
#define VT1616_IC_IB_MASK 0x000c
static void
ac97_vt1616_init(struct ac97_softc *as)
{
static const struct ac97_source_info sources[3] = {
{ AudioCoutputs, AudioNsurround, "mixtofront",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
VT1616_REG_IO_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 11, 0, 0, 0, CHECK_SURROUND, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AudioCoutputs, AudioNcenter, "mixtofront",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
VT1616_REG_IO_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 12, 0, 0, 0, CHECK_CENTER, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
{ AudioCoutputs, AudioNlfe, "mixtofront",
AUDIO_MIXER_ENUM, WRAP(ac97_on_off),
VT1616_REG_IO_CONTROL,
add missing initializers
2006-09-02 21:02:57 +04:00
0x0000, 1, 12, 0, 0, 0, CHECK_LFE, 0, 0, 0, },
Correct codec id of VT1611A. Add codec id of VT1616. ALC650 codec specific chagne: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. VT1616 codec specific change: Add outputs.surround.mixtofront, outputs.center.mixtofront, and outputs.lfe.mixtofront. (Not tested) XXX: We should provide ac97(4) manual page and describe codec-specific features.
2002-10-22 17:48:30 +04:00
};
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
Mixer changes: - Add "outputs.surround", "outputs.center", and "outputs.lfe" - If the codec is not capable of a feature, mixer variables about the feature is not created. For example, no "outputs.tone" for a codec without tone control. - Set the following mixer values in ac97_attach(): outputs.master=127,127 outputs.master.mute=off outputs.headphones.mute=off outputs.surround=127,127 outputs.surround.mute=off outputs.center=127 outputs.center.mute=off outputs.lfe=127 outputs.lfe.mute=off inputs.dac.mute=off inputs.cd.mute=off inputs.line.mute=off inputs.aux.mute=off inputs.video.mute=off record.volume.mute=off because the default setting of AC'97 codec (all mutes are on, and maximum volume) is troublesome. - Make "char*" parameters of ac97_get_portnum_by_name() "const char*" Codec ID changes: - If a codec ID is unknown but its vendor ID is known, ac97_attach() prints the vendor name like "dev0: <vendor name> unknown (0xXXXXXXXX) codec;" - Add IDs of Asahi Kasei AK4542, AK4544, AK4544A, AK4545, Realtek ALC100 - Correct a vendor name: "Advance Logic" -> "Avance Logic" - Add capability of codec-specific initialization ac97_attach(): - CDAC, SDAC, and LDAC are eanabled. - DELAY() before mixer settings. ThinkPad X24 needs it. ALC650 codec specific change: - Add "outputs.surround.lineinjack" to switch the line-in jack to the surround output - Add "outputs.center.micjack" and "outputs.lfe.micjack" (alias of "outputs.center.micjack") to switch the mic jack to the center/lfe output.
2002-10-14 12:48:15 +04:00
ac97_add_port(as, &sources[0]);
ac97_add_port(as, &sources[1]);
ac97_add_port(as, &sources[2]);
}
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
static int
ac97_modem_offhook_set(struct ac97_softc *as, int line, int newval)
{
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
uint16_t val;
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
KASSERT(mutex_owned(as->lock));
AC'97 modems don't have the same mixer controls as audio devices. Treat them differently. Mixers are built depending on the features returned in the ext_mid -- any combination of LINE1, LINE2, and HANDSET.
2005-04-08 03:24:05 +04:00
val = as->shadow_reg[AC97_REG_GPIO_STATUS >> 1];
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
switch (newval) {
case 0:
val &= ~line;
break;
case 1:
val |= line;
break;
}
ac97_write(as, AC97_REG_GPIO_STATUS, val);
return 0;
}
static int
ac97_sysctl_verify(SYSCTLFN_ARGS)
{
int error, tmp;
struct sysctlnode node;
struct ac97_softc *as;
node = *rnode;
as = rnode->sysctl_data;
if (node.sysctl_num == as->offhook_line1_mib) {
tmp = as->offhook_line1;
node.sysctl_data = &tmp;
error = sysctl_lookup(SYSCTLFN_CALL(&node));
if (error || newp == NULL)
return error;
if (tmp < 0 || tmp > 1)
return EINVAL;
as->offhook_line1 = tmp;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
ac97_modem_offhook_set(as, AC97_GPIO_LINE1_OH, tmp);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
} else if (node.sysctl_num == as->offhook_line2_mib) {
tmp = as->offhook_line2;
node.sysctl_data = &tmp;
error = sysctl_lookup(SYSCTLFN_CALL(&node));
if (error || newp == NULL)
return error;
if (tmp < 0 || tmp > 1)
return EINVAL;
as->offhook_line2 = tmp;
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_enter(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
ac97_modem_offhook_set(as, AC97_GPIO_LINE2_OH, tmp);
Merge jmcneill-audiomp3 branch, which is derived from ad-audiomp2. From the original ad-audiomp branch notes: Add MP locking to the audio drivers. Making the audio drivers MP safe is necessary before efforts can be made to make the VM system MP safe. The are two locks per device instance, an ISR lock and a character device lock. The ISR lock replaces calls to splaudio()/splx(), and will be held across calls to device methods which were called at splaudio() before (e.g. trigger_output). The character device lock is held across calls to nearly all of the methods, excluding some only used for initialization, e.g. get_locks. Welcome to 5.99.57.
2011-11-24 03:07:28 +04:00
mutex_exit(as->lock);
* Add more AC97 modem registers (from AC'97 revision 2.2) * Add sysctls to control the modem's off-hook status (work in progress)
2005-04-04 22:52:30 +04:00
}
return 0;
}