NetBSD/gnu/dist/ld/ldint.texinfo

413 lines
17 KiB
Plaintext
Raw Normal View History

1997-09-24 19:39:15 +04:00
\input texinfo
@setfilename ldint.info
@ifinfo
@format
START-INFO-DIR-ENTRY
* Ld-Internals: (ldint). The GNU linker internals.
END-INFO-DIR-ENTRY
@end format
@end ifinfo
@ifinfo
This file documents the internals of the GNU linker ld.
Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
Contributed by Cygnus Support.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.
@ignore
Permission is granted to process this file through Tex and print the
results, provided the printed document carries copying permission
notice identical to this one except for the removal of this paragraph
(this paragraph not being relevant to the printed manual).
@end ignore
Permission is granted to copy or distribute modified versions of this
manual under the terms of the GPL (for which purpose this text may be
regarded as a program in the language TeX).
@end ifinfo
@iftex
@finalout
@setchapternewpage off
@settitle GNU Linker Internals
@titlepage
@title{A guide to the internals of the GNU linker}
@author Per Bothner, Steve Chamberlain, Ian Lance Taylor
@author Cygnus Support
@page
@tex
\def\$#1${{#1}} % Kluge: collect RCS revision info without $...$
\xdef\manvers{\$Revision: 1.2 $} % For use in headers, footers too
1997-09-24 19:39:15 +04:00
{\parskip=0pt
\hfill Cygnus Support\par
\hfill \manvers\par
\hfill \TeX{}info \texinfoversion\par
}
@end tex
@vskip 0pt plus 1filll
Copyright @copyright{} 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
Permission is granted to make and distribute verbatim copies of
this manual provided the copyright notice and this permission notice
are preserved on all copies.
@end titlepage
@end iftex
@node Top
@top
This file documents the internals of the GNU linker @code{ld}. It is a
collection of miscellaneous information with little form at this point.
Mostly, it is a repository into which you can put information about
GNU @code{ld} as you discover it (or as you design changes to @code{ld}).
@menu
* README:: The README File
* Emulations:: How linker emulations are generated
@end menu
@node README
@chapter The @file{README} File
Check the @file{README} file; it often has useful information that does not
appear anywhere else in the directory.
@node Emulations
@chapter How linker emulations are generated
Each linker target has an @dfn{emulation}. The emulation includes the
default linker script, and certain emulations also modify certain types
of linker behaviour.
Emulations are created during the build process by the shell script
@file{genscripts.sh}.
The @file{genscripts.sh} script starts by reading a file in the
@file{emulparams} directory. This is a shell script which sets various
shell variables used by @file{genscripts.sh} and the other shell scripts
it invokes.
The @file{genscripts.sh} script will invoke a shell script in the
@file{scripttempl} directory in order to create default linker scripts
written in the linker command language. The @file{scripttempl} script
will be invoked 5 (or, in some cases, 6) times, with different
assignments to shell variables, to create different default scripts.
The choice of script is made based on the command line options.
After creating the scripts, @file{genscripts.sh} will invoke yet another
shell script, this time in the @file{emultempl} directory. That shell
script will create the emulation source file, which contains C code.
This C code permits the linker emulation to override various linker
behaviours. Most targets use the generic emulation code, which is in
@file{emultempl/generic.em}.
To summarize, @file{genscripts.sh} reads three shell scripts: an
emulation parameters script in the @file{emulparams} directory, a linker
script generation script in the @file{scripttempl} directory, and an
emulation source file generation script in the @file{emultempl}
directory.
For example, the Sun 4 linker sets up variables in
@file{emulparams/sun4.sh}, creates linker scripts using
@file{scripttempl/aout.sc}, and creates the emulation code using
@file{emultempl/sunos.em}.
Note that the linker can support several emulations simultaneously,
depending upon how it is configured. An emulation can be selected with
the @code{-m} option. The @code{-V} option will list all supported
emulations.
@menu
* emulation parameters:: @file{emulparams} scripts
* linker scripts:: @file{scripttempl} scripts
* linker emulations:: @file{emultempl} scripts
@end menu
@node emulation parameters
@section @file{emulparams} scripts
Each target selects a particular file in the @file{emulparams} directory
by setting the shell variable @code{targ_emul} in @file{configure.tgt}.
This shell variable is used by the @file{configure} script to control
building an emulation source file.
Certain conventions are enforced. Suppose the @code{targ_emul} variable
is set to @var{emul} in @file{configure.tgt}. The name of the emulation
shell script will be @file{emulparams/@var{emul}.sh}. The
@file{Makefile} must have a target named @file{e@var{emul}.c}; this
target must depend upon @file{emulparams/@var{emul}.sh}, as well as the
appropriate scripts in the @file{scripttempl} and @file{emultempl}
directories. The @file{Makefile} target must invoke @code{GENSCRIPTS}
with two arguments: @var{emul}, and the value of the make variable
@code{tdir_@var{emul}}. The value of the latter variable will be set by
the @file{configure} script, and is used to set the default target
directory to search.
By convention, the @file{emulparams/@var{emul}.sh} shell script should
only set shell variables. It may set shell variables which are to be
interpreted by the @file{scripttempl} and the @file{emultempl} scripts.
Certain shell variables are interpreted directly by the
@file{genscripts.sh} script.
Here is a list of shell variables interpreted by @file{genscripts.sh},
as well as some conventional shell variables interpreted by the
@file{scripttempl} and @file{emultempl} scripts.
@table @code
@item SCRIPT_NAME
This is the name of the @file{scripttempl} script to use. If
@code{SCRIPT_NAME} is set to @var{script}, @file{genscripts.sh} will use
the script @file{scriptteml/@var{script}.sc}.
@item TEMPLATE_NAME
This is the name of the @file{emultemlp} script to use. If
@code{TEMPLATE_NAME} is set to @var{template}, @file{genscripts.sh} will
use the script @file{emultempl/@var{template}.em}. If this variable is
not set, the default value is @samp{generic}.
@item GENERATE_SHLIB_SCRIPT
If this is set to a nonempty string, @file{genscripts.sh} will invoke
the @file{scripttempl} script an extra time to create a shared library
script. @ref{linker scripts}.
@item OUTPUT_FORMAT
This is normally set to indicate the BFD output format use (e.g.,
@samp{"a.out-sunos-big"}. The @file{scripttempl} script will normally
use it in an @code{OUTPUT_FORMAT} expression in the linker script.
@item ARCH
This is normally set to indicate the architecture to use (e.g.,
@samp{sparc}). The @file{scripttempl} script will normally use it in an
@code{OUTPUT_ARCH} expression in the linker script.
@item ENTRY
Some @file{scripttempl} scripts use this to set the entry address, in an
@code{ENTRY} expression in the linker script.
@item TEXT_START_ADDR
Some @file{scripttempl} scripts use this to set the start address of the
@samp{.text} section.
@item NONPAGED_TEXT_START_ADDR
If this is defined, the @file{genscripts.sh} script sets
@code{TEXT_START_ADDR} to its value before running the
@file{scripttempl} script for the @code{-n} and @code{-N} options
(@pxref{linker scripts}).
@item SEGMENT_SIZE
The @file{genscripts.sh} script uses this to set the default value of
@code{DATA_ALIGNMENT} when running the @file{scripttempl} script.
@item TARGET_PAGE_SIZE
If @code{SEGMENT_SIZE} is not defined, the @file{genscripts.sh} script
uses this to define it.
@end table
@node linker scripts
@section @file{scripttempl} scripts
Each linker target uses a @file{scripttempl} script to generate the
default linker scripts. The name of the @file{scripttempl} script is
set by the @code{SCRIPT_NAME} variable in the @file{emulparams} script.
If @code{SCRIPT_NAME} is set to @var{script}, @code{genscripts.sh} will
invoke @file{scripttempl/@var{script}.sc}.
The @file{genscripts.sh} script will invoke the @file{scripttempl}
script 5 or 6 times. Each time it will set the shell variable
@code{LD_FLAG} to a different value. When the linker is run, the
options used will direct it to select a particular script. (Script
selection is controlled by the @code{get_script} emulation entry point;
this describes the conventional behaviour).
The @file{scripttempl} script should just write a linker script, written
in the linker command language, to standard output. If the emulation
name--the name of the @file{emulparams} file without the @file{.sc}
extension--is @var{emul}, then the output will be directed to
@file{ldscripts/@var{emul}.@var{extension}} in the build directory,
where @var{extension} changes each time the @file{scripttempl} script is
invoked.
Here is the list of values assigned to @code{LD_FLAG}.
@table @code
@item (empty)
The script generated is used by default (when none of the following
cases apply). The output has an extension of @file{.x}.
@item n
The script generated is used when the linker is invoked with the
@code{-n} option. The output has an extension of @file{.xn}.
@item N
The script generated is used when the linker is invoked with the
@code{-N} option. The output has an extension of @file{.xbn}.
@item r
The script generated is used when the linker is invoked with the
@code{-r} option. The output has an extension of @file{.xr}.
@item u
The script generated is used when the linker is invoked with the
@code{-Ur} option. The output has an extension of @file{.xu}.
@item shared
The @file{scripttempl} script is only invoked with @code{LD_FLAG} set to
this value if @code{GENERATE_SHLIB_SCRIPT} is defined in the
@file{emulparams} file. The @file{emultempl} script must arrange to use
this script at the appropriate time, normally when the linker is invoked
with the @code{-shared} option. The output has an extension of
@file{.xs}.
@end table
Besides the shell variables set by the @file{emulparams} script, and the
@code{LD_FLAG} variable, the @file{genscripts.sh} script will set
certain variables for each run of the @file{scripttempl} script.
@table @code
@item RELOCATING
This will be set to a non-empty string when the linker is doing a final
relocation (e.g., all scripts other than @code{-r} and @code{-Ur}).
@item CONSTRUCTING
This will be set to a non-empty string when the linker is building
global constructor and destructor tables (e.g., all scripts other than
@code{-r}).
@item DATA_ALIGNMENT
This will be set to an @code{ALIGN} expression when the output should be
page aligned, or to @samp{.} when generating the @code{-N} script.
@item CREATE_SHLIB
This will be set to a non-empty string when generating a @code{-shared}
script.
@end table
The conventional way to write a @file{scripttempl} script is to first
set a few shell variables, and then write out a linker script using
@code{cat} with a here document. The linker script will use variable
substitutions, based on the above variables and those set in the
@file{emulparams} script, to control its behaviour.
When there are parts of the @file{scripttempl} script which should only
be run when doing a final relocation, they should be enclosed within a
variable substitution based on @code{RELOCATING}. For example, on many
targets special symbols such as @code{_end} should be defined when doing
a final link. Naturally, those symbols should not be defined when doing
a relocateable link using @code{-r}. The @file{scripttempl} script
could use a construct like this to define those symbols:
@smallexample
$@{RELOCATING+ _end = .;@}
@end smallexample
This will do the symbol assignment only if the @code{RELOCATING}
variable is defined.
The basic job of the linker script is to put the sections in the correct
order, and at the correct memory addresses. For some targets, the
linker script may have to do some other operations.
For example, on most MIPS platforms, the linker is responsible for
defining the special symbol @code{_gp}, used to initialize the
@code{$gp} register. It must be set to the start of the small data
section plus @code{0x8000}. Naturally, it should only be defined when
doing a final relocation. This will typically be done like this:
@smallexample
$@{RELOCATING+ _gp = ALIGN(16) + 0x8000;@}
@end smallexample
This line would appear just before the sections which compose the small
data section (@samp{.sdata}, @samp{.sbss}). All those sections would be
contiguous in memory.
Many COFF systems build constructor tables in the linker script. The
compiler will arrange to output the address of each global constructor
in a @samp{.ctor} section, and the address of each global destructor in
a @samp{.dtor} section (this is done by defining
@code{ASM_OUTPUT_CONSTRUCTOR} and @code{ASM_OUTPUT_DESTRUCTOR} in the
@code{gcc} configuration files). The @code{gcc} runtime support
routines expect the constructor table to be named @code{__CTOR_LIST__}.
They expect it to be a list of words, with the first word being the
count of the number of entries. There should be a trailing zero word.
(Actually, the count may be -1 if the trailing word is present, and the
trailing word may be omitted if the count is correct, but, as the
@code{gcc} behaviour has changed slightly over the years, it is safest
to provide both). Here is a typical way that might be handled in a
@file{scripttempl} file.
@smallexample
$@{CONSTRUCTING+ __CTOR_LIST__ = .;@}
$@{CONSTRUCTING+ LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)@}
$@{CONSTRUCTING+ *(.ctors)@}
$@{CONSTRUCTING+ LONG(0)@}
$@{CONSTRUCTING+ __CTOR_END__ = .;@}
$@{CONSTRUCTING+ __DTOR_LIST__ = .;@}
$@{CONSTRUCTING+ LONG((__DTOR_END__ - __DTOR_LIST__) / 4 - 2)@}
$@{CONSTRUCTING+ *(.dtors)@}
$@{CONSTRUCTING+ LONG(0)@}
$@{CONSTRUCTING+ __DTOR_END__ = .;@}
@end smallexample
The use of @code{CONSTRUCTING} ensures that these linker script commands
will only appear when the linker is supposed to be building the
constructor and destructor tables. This example is written for a target
which uses 4 byte pointers.
Embedded systems often need to set a stack address. This is normally
best done by using the @code{PROVIDE} construct with a default stack
address. This permits the user to easily override the stack address
using the @code{--defsym} option. Here is an example:
@smallexample
$@{RELOCATING+ PROVIDE (__stack = 0x80000000);@}
@end smallexample
The value of the symbol @code{__stack} would then be used in the startup
code to initialize the stack pointer.
@node linker emulations
@section @file{emultempl} scripts
Each linker target uses an @file{emultempl} script to generate the
emulation code. The name of the @file{emultempl} script is set by the
@code{TEMPLATE_NAME} variable in the @file{emulparams} script. If the
@code{TEMPLATE_NAME} variable is not set, the default is
@samp{generic}. If the value of @code{TEMPLATE_NAME} is @var{template},
@file{genscripts.sh} will use @file{emultempl/@var{template}.em}.
Most targets use the generic @file{emultempl} script,
@file{emultempl/generic.em}. A different @file{emultempl} script is
only needed if the linker must support unusual actions, such as linking
against shared libraries.
The @file{emultempl} script is normally written as a simple invocation
of @code{cat} with a here document. The document will use a few
variable substitutions. Typically each function names uses a
substitution involving @code{EMULATION_NAME}, for ease of debugging when
the linker supports multiple emulations.
Every function and variable in the emitted file should be static. The
only globally visible object must be named
@code{ld_@var{EMULATION_NAME}_emulation}, where @var{EMULATION_NAME} is
the name of the emulation set in @file{configure.tgt} (this is also the
name of the @file{emulparams} file without the @file{.sh} extension).
The @file{genscripts.sh} script will set the shell variable
@code{EMULATION_NAME} before invoking the @file{emultempl} script.
The @code{ld_@var{EMULATION_NAME}_emulation} variable must be a
@code{struct ld_emulation_xfer_struct}, as defined in @file{ldemul.h}.
It defines a set of function pointers which are invoked by the linker,
as well as strings for the emulation name (normally set from the shell
variable @code{EMULATION_NAME} and the default BFD target name (normally
set from the shell variable @code{OUTPUT_FORMAT} which is normally set
by the @file{emulparams} file).
The @file{genscripts.sh} script will set the shell variable
@code{COMPILE_IN} when it invokes the @file{emultempl} script for the
default emulation. In this case, the @file{emultempl} script should
include the linker scripts directly, and return them from the
@code{get_scripts} entry point. When the emulation is not the default,
the @code{get_scripts} entry point should just return a file name. See
@file{emultempl/generic.em} for an example of how this is done.
At some point, the linker emulation entry points should be documented.
@contents
@bye