Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/scsipi/atapiconf.h

59 lines
2.3 KiB
C
Raw Normal View History

Remove closes 3 & 4 from my licence. Lots of thanks to Soren Jacobsen for the booring work !
2009-10-19 22:41:07 +04:00
/* $NetBSD: atapiconf.h,v 1.23 2009/10/19 18:41:16 bouyer Exp $ */
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
/*
Update my copyrigth.
2001-12-03 03:20:22 +03:00
* Copyright (c) 1996, 2001 Manuel Bouyer. All rights reserved.
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
Protect against multiple inclusion.
2004-08-12 08:31:33 +04:00
#ifndef _DEV_SCSIPI_ATAPICONF_H
#define _DEV_SCSIPI_ATAPICONF_H
This file needs to know the size of "struct device", so include <sys/device.h> here. This should allow the sparc GENERIC_SUN4U and sparc64 kernels to build sata_subr.c again.
2006-11-23 11:44:42 +03:00
#include <sys/device.h>
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
#include <dev/scsipi/scsipiconf.h>
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op if an IRQ was not detected, unless the force flag was given. Use this to detect if the IRQ was for us (closer to shared IRQ for controllers which don't have their own IRQ handler in pciide.c) and to poll for DMA xfer. Also makes the timeout recovery code simpler. - ATAPI cleanup: don't call controller-specific functions from atapiconf.c (wdc_*), so that it's possible to attach an atapibus to something else than a wdc/pciide (Hi Lennart :). Overload struct scsi_adapter with struct atapi_adapter, defined as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points to an scsi_adapter, atapi code casts it to atapi_adapter if needed. Move atapi_softc to atapiconf.h so that it can be used by the underlying controller code (e.g. atapi_wdc.c). Add an atapi-specific callback *atapi_probedev(), which probe a drive in a controller-specific way, allocate the sc_link and fills in the ataparams if needed. It then calls atapi_probedev() (from atapiconf.c) to do the generic initialisations and attach the device. - While I'm there merge and centralise the state definitions in atavar.h. It should now be possible to use a common ata/atapi routine to set the drive's modes (will do later).
2000-04-01 18:32:22 +04:00
struct atapibus_softc {
Split device_t and softc for atapibus(4).
2008-03-24 17:44:26 +03:00
device_t sc_dev;
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
struct scsipi_channel *sc_channel; /* our scsipi_channel */
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op if an IRQ was not detected, unless the force flag was given. Use this to detect if the IRQ was for us (closer to shared IRQ for controllers which don't have their own IRQ handler in pciide.c) and to poll for DMA xfer. Also makes the timeout recovery code simpler. - ATAPI cleanup: don't call controller-specific functions from atapiconf.c (wdc_*), so that it's possible to attach an atapibus to something else than a wdc/pciide (Hi Lennart :). Overload struct scsi_adapter with struct atapi_adapter, defined as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points to an scsi_adapter, atapi code casts it to atapi_adapter if needed. Move atapi_softc to atapiconf.h so that it can be used by the underlying controller code (e.g. atapi_wdc.c). Add an atapi-specific callback *atapi_probedev(), which probe a drive in a controller-specific way, allocate the sc_link and fills in the ataparams if needed. It then calls atapi_probedev() (from atapiconf.c) to do the generic initialisations and attach the device. - While I'm there merge and centralise the state definitions in atavar.h. It should now be possible to use a common ata/atapi routine to set the drive's modes (will do later).
2000-04-01 18:32:22 +04:00
};
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
extern const struct scsipi_periphsw atapi_probe_periphsw;
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op if an IRQ was not detected, unless the force flag was given. Use this to detect if the IRQ was for us (closer to shared IRQ for controllers which don't have their own IRQ handler in pciide.c) and to poll for DMA xfer. Also makes the timeout recovery code simpler. - ATAPI cleanup: don't call controller-specific functions from atapiconf.c (wdc_*), so that it's possible to attach an atapibus to something else than a wdc/pciide (Hi Lennart :). Overload struct scsi_adapter with struct atapi_adapter, defined as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points to an scsi_adapter, atapi code casts it to atapi_adapter if needed. Move atapi_softc to atapiconf.h so that it can be used by the underlying controller code (e.g. atapi_wdc.c). Add an atapi-specific callback *atapi_probedev(), which probe a drive in a controller-specific way, allocate the sc_link and fills in the ataparams if needed. It then calls atapi_probedev() (from atapiconf.c) to do the generic initialisations and attach the device. - While I'm there merge and centralise the state definitions in atavar.h. It should now be possible to use a common ata/atapi routine to set the drive's modes (will do later).
2000-04-01 18:32:22 +04:00
/*
Clean up attach of wd/atapibus: kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead of ata_atapi_attach as attach arch. Create a ata_device, compatible with scsipi_channel, to attach wd.
2001-12-03 01:44:32 +03:00
* We need some more data than in scsipi_adapter.
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
* So define a new atapi_adapter, we'll cast channel->chan_adapter to
Clean up attach of wd/atapibus: kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead of ata_atapi_attach as attach arch. Create a ata_device, compatible with scsipi_channel, to attach wd.
2001-12-03 01:44:32 +03:00
* atapi_adapter when we need the extra data (only in ATAPI code)
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op if an IRQ was not detected, unless the force flag was given. Use this to detect if the IRQ was for us (closer to shared IRQ for controllers which don't have their own IRQ handler in pciide.c) and to poll for DMA xfer. Also makes the timeout recovery code simpler. - ATAPI cleanup: don't call controller-specific functions from atapiconf.c (wdc_*), so that it's possible to attach an atapibus to something else than a wdc/pciide (Hi Lennart :). Overload struct scsi_adapter with struct atapi_adapter, defined as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points to an scsi_adapter, atapi code casts it to atapi_adapter if needed. Move atapi_softc to atapiconf.h so that it can be used by the underlying controller code (e.g. atapi_wdc.c). Add an atapi-specific callback *atapi_probedev(), which probe a drive in a controller-specific way, allocate the sc_link and fills in the ataparams if needed. It then calls atapi_probedev() (from atapiconf.c) to do the generic initialisations and attach the device. - While I'm there merge and centralise the state definitions in atavar.h. It should now be possible to use a common ata/atapi routine to set the drive's modes (will do later).
2000-04-01 18:32:22 +04:00
*/
struct atapi_adapter {
struct scsipi_adapter _generic;
De-__P.
2004-08-21 21:41:18 +04:00
void (*atapi_probe_device)(struct atapibus_softc *, int);
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op if an IRQ was not detected, unless the force flag was given. Use this to detect if the IRQ was for us (closer to shared IRQ for controllers which don't have their own IRQ handler in pciide.c) and to poll for DMA xfer. Also makes the timeout recovery code simpler. - ATAPI cleanup: don't call controller-specific functions from atapiconf.c (wdc_*), so that it's possible to attach an atapibus to something else than a wdc/pciide (Hi Lennart :). Overload struct scsi_adapter with struct atapi_adapter, defined as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points to an scsi_adapter, atapi code casts it to atapi_adapter if needed. Move atapi_softc to atapiconf.h so that it can be used by the underlying controller code (e.g. atapi_wdc.c). Add an atapi-specific callback *atapi_probedev(), which probe a drive in a controller-specific way, allocate the sc_link and fills in the ataparams if needed. It then calls atapi_probedev() (from atapiconf.c) to do the generic initialisations and attach the device. - While I'm there merge and centralise the state definitions in atavar.h. It should now be possible to use a common ata/atapi routine to set the drive's modes (will do later).
2000-04-01 18:32:22 +04:00
};
De-__P.
2004-08-21 21:41:18 +04:00
void *atapi_probe_device(struct atapibus_softc *, int,
struct scsipi_periph *, struct scsipibus_attach_args *);
int atapiprint(void *, const char *);
void atapi_print_addr(struct scsipi_periph *);
int atapi_interpret_sense(struct scsipi_xfer *);
Change the way bustype_cmd is used. Rather than having it be responsible for calling scsipi_make_xs() and scsipi_execute_xs(), instead push these into scsipi_command. Make bustype_cmd and PHOLD/PRELE be called from scsipi_execute_xs(). This allows us to create a xfer structure -- possibly on the stack -- and call scsipi_execute_xs() directly.
2004-09-18 03:30:22 +04:00
void atapi_scsipi_cmd(struct scsipi_xfer *);
Protect against multiple inclusion.
2004-08-12 08:31:33 +04:00
#endif /* _DEV_SCSIPI_ATAPICONF_H */