2021-11-05 04:53:30 +03:00
|
|
|
/* $NetBSD: ihphy.c,v 1.20 2021/11/05 01:53:30 msaitoh Exp $ */
|
2010-11-27 23:15:27 +03:00
|
|
|
|
|
|
|
/*-
|
|
|
|
* Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
|
|
* NASA Ames Research Center, and by Frank van der Linden.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Driver for Intel's 82577 (Hanksville) Ethernet 10/100/1000 PHY
|
|
|
|
* Data Sheet: http://download.intel.com/design/network/datashts/319439.pdf
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
2021-11-05 04:53:30 +03:00
|
|
|
__KERNEL_RCSID(0, "$NetBSD: ihphy.c,v 1.20 2021/11/05 01:53:30 msaitoh Exp $");
|
2010-11-27 23:15:27 +03:00
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/device.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
|
|
|
|
#include <dev/mii/mii.h>
|
|
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/mii/miidevs.h>
|
|
|
|
|
|
|
|
#include <dev/mii/ihphyreg.h>
|
|
|
|
|
|
|
|
static int ihphymatch(device_t, cfdata_t, void *);
|
|
|
|
static void ihphyattach(device_t, device_t, void *);
|
|
|
|
|
2020-03-28 21:37:18 +03:00
|
|
|
CFATTACH_DECL_NEW(ihphy, sizeof(struct mii_softc),
|
|
|
|
ihphymatch, ihphyattach, mii_phy_detach, mii_phy_activate);
|
2010-11-27 23:15:27 +03:00
|
|
|
|
|
|
|
static int ihphy_service(struct mii_softc *, struct mii_data *, int);
|
|
|
|
static void ihphy_status(struct mii_softc *);
|
|
|
|
static void ihphy_reset(struct mii_softc *);
|
|
|
|
|
|
|
|
static const struct mii_phy_funcs ihphy_funcs = {
|
|
|
|
ihphy_service, ihphy_status, ihphy_reset,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct mii_phydesc ihphys[] = {
|
2019-02-24 20:22:21 +03:00
|
|
|
MII_PHY_DESC(INTEL, I82577),
|
|
|
|
MII_PHY_DESC(INTEL, I82579),
|
|
|
|
MII_PHY_DESC(INTEL, I217),
|
|
|
|
MII_PHY_DESC(INTEL, I82580),
|
|
|
|
MII_PHY_DESC(INTEL, I350),
|
|
|
|
MII_PHY_END,
|
2010-11-27 23:15:27 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
|
|
|
ihphymatch(device_t parent, cfdata_t match, void *aux)
|
|
|
|
{
|
|
|
|
struct mii_attach_args *ma = aux;
|
|
|
|
|
|
|
|
if (mii_phy_match(ma, ihphys) != NULL)
|
|
|
|
return 10;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ihphyattach(device_t parent, device_t self, void *aux)
|
|
|
|
{
|
|
|
|
struct mii_softc *sc = device_private(self);
|
|
|
|
struct mii_attach_args *ma = aux;
|
|
|
|
struct mii_data *mii = ma->mii_data;
|
|
|
|
const struct mii_phydesc *mpd;
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
uint16_t reg;
|
2010-11-27 23:15:27 +03:00
|
|
|
|
|
|
|
mpd = mii_phy_match(ma, ihphys);
|
|
|
|
aprint_naive(": Media interface\n");
|
|
|
|
aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
|
|
|
|
|
|
|
|
sc->mii_dev = self;
|
|
|
|
sc->mii_inst = mii->mii_instance;
|
|
|
|
sc->mii_phy = ma->mii_phyno;
|
2016-11-02 10:01:54 +03:00
|
|
|
sc->mii_mpd_oui = MII_OUI(ma->mii_id1, ma->mii_id2);
|
|
|
|
sc->mii_mpd_model = MII_MODEL(ma->mii_id2);
|
|
|
|
sc->mii_mpd_rev = MII_REV(ma->mii_id2);
|
2010-11-27 23:15:27 +03:00
|
|
|
sc->mii_funcs = &ihphy_funcs;
|
|
|
|
sc->mii_pdata = mii;
|
|
|
|
sc->mii_flags = ma->mii_flags;
|
|
|
|
|
2020-03-16 02:04:50 +03:00
|
|
|
mii_lock(mii);
|
|
|
|
|
2010-11-27 23:15:27 +03:00
|
|
|
PHY_RESET(sc);
|
|
|
|
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, MII_BMSR, &sc->mii_capabilities);
|
|
|
|
sc->mii_capabilities &= ma->mii_capmask;
|
2010-11-27 23:15:27 +03:00
|
|
|
if (sc->mii_capabilities & BMSR_EXTSTAT)
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, MII_EXTSR, &sc->mii_extcapabilities);
|
2019-11-27 13:19:20 +03:00
|
|
|
|
2020-03-16 02:04:50 +03:00
|
|
|
mii_unlock(mii);
|
|
|
|
|
2019-11-27 13:19:20 +03:00
|
|
|
mii_phy_add_media(sc);
|
2010-11-27 23:15:27 +03:00
|
|
|
|
2020-03-16 02:04:50 +03:00
|
|
|
mii_lock(mii);
|
2019-03-25 10:34:13 +03:00
|
|
|
/* Link setup (as done by Intel's Linux driver for the 82577). */
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, IHPHY_MII_CFG, ®);
|
2010-11-27 23:15:27 +03:00
|
|
|
reg |= IHPHY_CFG_TX_CRS;
|
|
|
|
reg |= IHPHY_CFG_DOWN_SHIFT;
|
|
|
|
PHY_WRITE(sc, IHPHY_MII_CFG, reg);
|
2020-03-16 02:04:50 +03:00
|
|
|
mii_unlock(mii);
|
2010-11-27 23:15:27 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
ihphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
|
|
{
|
|
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
uint16_t reg;
|
2010-11-27 23:15:27 +03:00
|
|
|
|
2020-03-16 02:04:50 +03:00
|
|
|
KASSERT(mii_locked(mii));
|
|
|
|
|
2010-11-27 23:15:27 +03:00
|
|
|
switch (cmd) {
|
|
|
|
case MII_POLLSTAT:
|
2019-03-25 10:34:13 +03:00
|
|
|
/* If we're not polling our PHY instance, just return. */
|
2010-11-27 23:15:27 +03:00
|
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
|
|
return 0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MII_MEDIACHG:
|
|
|
|
/*
|
|
|
|
* If the media indicates a different PHY instance,
|
|
|
|
* isolate ourselves.
|
|
|
|
*/
|
|
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, MII_BMCR, ®);
|
2010-11-27 23:15:27 +03:00
|
|
|
PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2019-03-25 10:34:13 +03:00
|
|
|
/* If the interface is not up, don't do anything. */
|
2010-11-27 23:15:27 +03:00
|
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
|
|
break;
|
|
|
|
|
2019-03-25 10:34:13 +03:00
|
|
|
/* If media is deselected, disable link (standby). */
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, IHPHY_MII_ECR, ®);
|
2010-11-27 23:15:27 +03:00
|
|
|
if (IFM_SUBTYPE(ife->ifm_media) == IFM_NONE)
|
|
|
|
reg &= ~IHPHY_ECR_LNK_EN;
|
|
|
|
else
|
|
|
|
reg |= IHPHY_ECR_LNK_EN;
|
|
|
|
PHY_WRITE(sc, IHPHY_MII_ECR, reg);
|
|
|
|
|
2019-03-25 10:34:13 +03:00
|
|
|
/* XXX Adjust MDI/MDIX configuration? Other settings? */
|
2010-11-27 23:15:27 +03:00
|
|
|
|
|
|
|
mii_phy_setmedia(sc);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MII_TICK:
|
2019-03-25 10:34:13 +03:00
|
|
|
/* If we're not currently selected, just return. */
|
2010-11-27 23:15:27 +03:00
|
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (mii_phy_tick(sc) == EJUSTRETURN)
|
|
|
|
return 0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case MII_DOWN:
|
|
|
|
mii_phy_down(sc);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update the media status. */
|
|
|
|
mii_phy_status(sc);
|
|
|
|
|
|
|
|
/* Callback if something changed. */
|
|
|
|
mii_phy_update(sc, cmd);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ihphy_status(struct mii_softc *sc)
|
|
|
|
{
|
|
|
|
struct mii_data *mii = sc->mii_pdata;
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
uint16_t esr, bmcr, gtsr;
|
2010-11-27 23:15:27 +03:00
|
|
|
|
2020-03-16 02:04:50 +03:00
|
|
|
KASSERT(mii_locked(mii));
|
|
|
|
|
2010-11-27 23:15:27 +03:00
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, IHPHY_MII_ESR, &esr);
|
2010-11-27 23:15:27 +03:00
|
|
|
|
|
|
|
if (esr & IHPHY_ESR_LINK)
|
|
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, MII_BMCR, &bmcr);
|
2010-11-27 23:15:27 +03:00
|
|
|
if (bmcr & (BMCR_ISO | BMCR_PDOWN)) {
|
|
|
|
mii->mii_media_active |= IFM_NONE;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bmcr & BMCR_LOOP)
|
|
|
|
mii->mii_media_active |= IFM_LOOP;
|
|
|
|
|
|
|
|
if (bmcr & BMCR_AUTOEN) {
|
|
|
|
if ((esr & IHPHY_ESR_ANEG_STAT) == 0) {
|
|
|
|
/* Erg, still trying, I guess... */
|
|
|
|
mii->mii_media_active |= IFM_NONE;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (esr & IHPHY_ESR_SPEED) {
|
|
|
|
case IHPHY_SPEED_1000:
|
|
|
|
mii->mii_media_active |= IFM_1000_T;
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, MII_100T2SR, >sr);
|
2010-11-27 23:15:27 +03:00
|
|
|
if (gtsr & GTSR_MS_RES)
|
|
|
|
mii->mii_media_active |= IFM_ETH_MASTER;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IHPHY_SPEED_100:
|
|
|
|
/* 100BASE-T2 and 100BASE-T4 are not supported. */
|
|
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case IHPHY_SPEED_10:
|
|
|
|
mii->mii_media_active |= IFM_10_T;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
mii->mii_media_active |= IFM_NONE;
|
|
|
|
mii->mii_media_status = 0;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (esr & IHPHY_ESR_DUPLEX)
|
2014-06-16 20:48:16 +04:00
|
|
|
mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc);
|
|
|
|
else
|
|
|
|
mii->mii_media_active |= IFM_HDX;
|
2010-11-27 23:15:27 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
ihphy_reset(struct mii_softc *sc)
|
|
|
|
{
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
int i;
|
|
|
|
uint16_t reg;
|
2010-11-27 23:15:27 +03:00
|
|
|
|
2020-03-16 02:04:50 +03:00
|
|
|
KASSERT(mii_locked(sc->mii_pdata));
|
|
|
|
|
2010-11-27 23:15:27 +03:00
|
|
|
PHY_WRITE(sc, MII_BMCR, BMCR_RESET | BMCR_ISO);
|
|
|
|
|
|
|
|
/* Wait another 100ms for it to complete. */
|
|
|
|
for (i = 0; i < 100; i++) {
|
Change MII PHY read/write API from:
int (*mii_readreg_t)(device_t, int, int);
void (*mii_writereg_t)(device_t, int, int, int);
to:
int (*mii_readreg_t)(device_t, int, int, uint16_t *);
int (*mii_writereg_t)(device_t, int, int, uint16_t);
Now we can test if a read/write operation failed or not by the return value.
In 802.3 spec says that the PHY shall not respond to read/write transaction
to the unimplemented register(22.2.4.3). Detecting timeout can be used to
check whether a register is implemented or not (if the register conforms to
the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR.
Note that I noticed that the following code do infinite loop in the
read/wirte function. If it accesses unimplemented PHY register, it will hang.
It should be fixed:
arm/at91/at91emac.c
arm/ep93xx/epe.c
arm/omap/omapl1x_emac.c
mips/ralink/ralink_eth.c
arch/powerpc/booke/dev/pq3etsec.c(read)
dev/cadence/if_cemac.c <- hkenken
dev/ic/lan9118.c
Tested with the following device:
axe+ukphy
axe+rgephy
axen+rgephy (tested by Andrius V)
wm+atphy
wm+ukphy
wm+igphy
wm+ihphy
wm+makphy
sk+makphy
sk+brgphy
sk+gentbi
msk+makphy
sip+icsphy
sip+ukphy
re+rgephy
bge+brgphy
bnx+brgphy
gsip+gphyter
rtk+rlphy
fxp+inphy (tested by Andrius V)
tlp+acphy
ex+exphy
epic+qsphy
vge+ciphy (tested by Andrius V)
vr+ukphy (tested by Andrius V)
vte+ukphy (tested by Andrius V)
Not tested (MAC):
arm:at91emac
arm:cemac
arm:epe
arm:geminigmac
arm:enet
arm:cpsw
arm:emac(omac)
arm:emac(sunxi)
arm:npe
evbppc:temac
macppc:bm
macppc:gm
mips:aumac
mips:ae
mips:cnmac
mips:reth
mips:sbmac
playstation2:smap
powerpc:tsec
powerpc:emac(ibm4xx)
sgimips:mec
sparc:be
sf
ne(ax88190, dl10019)
awge
ep
gem
hme
smsh
mtd
sm
age
alc
ale
bce
cas
et
jme
lii
nfe
pcn
ste
stge
tl
xi
aue
mue
smsc
udav
url
Not tested (PHY):
amhphy
bmtphy
dmphy
etphy
glxtphy
ikphy
iophy
lxtphy
nsphyter
pnaphy
rdcphy
sqphy
tlphy
tqphy
urlphy
2019-01-22 06:42:24 +03:00
|
|
|
PHY_READ(sc, MII_BMCR, ®);
|
2010-11-27 23:15:27 +03:00
|
|
|
if ((reg & BMCR_RESET) == 0)
|
|
|
|
break;
|
|
|
|
delay(1000);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (sc->mii_inst != 0)
|
|
|
|
PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
|
|
|
|
}
|