Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/mca/files.mca

63 lines
1.5 KiB
Plaintext
Raw Normal View History

Nonworking NCR 53c90 attachment. I don't get any interrupts from the device yet, need to find real NCR53c90 docs to figure out what's wrong.
2001-12-01 13:42:38 +03:00
# $NetBSD: files.mca,v 1.16 2001/12/01 10:42:38 jdolecek Exp $
MI part of MicroChannel Architecture bus support This work is based on code written by Scott D. Telford, the IBM Token Ring card attachment was written by Gregory McGarry. XXX this is still very experimental and development version; use at your XXX own risk
2000-05-11 19:42:00 +04:00
#
# Config.new file and device description for machine-independent MCA code.
# Included by ports that need it.
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag MCAVERBOSE
MI part of MicroChannel Architecture bus support This work is based on code written by Scott D. Telford, the IBM Token Ring card attachment was written by Gregory McGarry. XXX this is still very experimental and development version; use at your XXX own risk
2000-05-11 19:42:00 +04:00
#device mca {[slot = -1]}
attach mca at mcabus
whitespace police
2001-02-24 04:59:46 +03:00
file dev/mca/mca.c mca needs-flag
MI part of MicroChannel Architecture bus support This work is based on code written by Scott D. Telford, the IBM Token Ring card attachment was written by Gregory McGarry. XXX this is still very experimental and development version; use at your XXX own risk
2000-05-11 19:42:00 +04:00
file dev/mca/mca_subr.c mca
Add MCA ep(4) attachment, for 3Com 3c529-type cards. Tested with 3c529-TP, provided to me by David Brownlee (thanks!). Performance of this card is quite poor on my PS/2 with 386DX, like 100KB/s at best, but as low as 5KB/s when transferring bigger files due to packet overruns. It would be good to revisit this later, probably by teaching the ic code to use RX Early.
2001-03-22 19:54:45 +03:00
# 3Com 3C529
attach ep at mca with ep_mca: elink
file dev/mca/if_ep_mca.c ep_mca
MI part of MicroChannel Architecture bus support This work is based on code written by Scott D. Telford, the IBM Token Ring card attachment was written by Gregory McGarry. XXX this is still very experimental and development version; use at your XXX own risk
2000-05-11 19:42:00 +04:00
Add MCA we(4) attachment for WD80x3 cards and clones. Tested with WD8003W/A, card provided by David Brownlee (thanks!). The SMC Elite stuff not tested since I don't have any; hopefully it's correct, should match information in ADF files. The MCA-specific init quirk taken from Linux smc-mca.c driver. I don't quite grok why it works, but it does *cross fingers*. The WD8003W/A seems to be quite a good choice. I get like 340KB/s on my machine, where 3c523 does only like 310KB/s. The numbers would be probably even better with faster CPU than 386DX :)
2001-03-23 22:25:35 +03:00
# WD/SMC 80x3x/A and clones
attach we at mca with we_mca
file dev/mca/if_we_mca.c we_mca
MI part of MicroChannel Architecture bus support This work is based on code written by Scott D. Telford, the IBM Token Ring card attachment was written by Gregory McGarry. XXX this is still very experimental and development version; use at your XXX own risk
2000-05-11 19:42:00 +04:00
# Adaptec AHA-1640
attach aha at mca with aha_mca: isadma
file dev/mca/aha_mca.c aha_mca
# TROPIC based Token-Ring (IBM)
attach tr at mca with tr_mca
file dev/mca/if_tr_mca.c tr_mca
Add driver for 3Com EtherLink/MC (3c523) Ethernet MCA card. This beast uses i82586-based controller, similarily to e.g. ai(4), el(4) or ix(4). The driver was modelled after the ai(4) driver. Due to lack of better documentation, Linux 3c523 driver was used to find out 3c523-specific quirks. Of course, the necessary work was greatly reduced by our decend generic ic/i82586 code :) Finally, NetBSD supports an ethernet card on IBM PS/2!
2001-03-17 02:03:15 +03:00
# 3Com 3C523
device elmc: ether, ifnet, arp, i82586
attach elmc at mca with elmc_mca
file dev/mca/if_elmc_mca.c elmc_mca
Provide MCA com(4) attachment. Tested with IBM Internal modem, kindly donated to me by David Brownlee <abs@anim.dreamworks.com>.
2001-03-20 00:56:43 +03:00
# serial port devices
attach com at mca with com_mca
file dev/mca/com_mca.c com_mca
Add driver for AT1720 MCA cards. This uses generic MB86960 support code, and shares some bits with ISA AT1700 driver. Gee, this one was really easy :) This card turned out to be quite good performer - I get about 360KB/s on 386DX PS/2 machine, which is best of all supported cards so far. Tested with AT1720T, card donated by David Brownlee.
2001-03-31 04:43:05 +04:00
# Allied Telesis AT1720
# device in sys/conf/files
attach ate at mca with ate_mca
file dev/mca/if_ate_mca.c ate_mca
Add a driver for IBM ESDI disk controllers. Tested with IBM Integ. ESDI Fixed Disk & Controller only at the moment. This driver still needs some touchup (error recovery is not quite good, MCA DMA controller goo should be moved to driver independant location), but is working enough to be usable for others. And I want this under CVS control :) Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).
2001-04-19 11:30:24 +04:00
# ESDI controllers & disks
add 'drive' locator to mca edc
2001-11-24 01:35:46 +03:00
device edc {[drive = -1]}
Use "edc" instead of "dasd". As pointed out by Soren, dasd doesn't mean anything special in IBM-talk. And edc better matches prior art, too.
2001-04-19 21:17:28 +04:00
attach edc at mca with edc_mca
file dev/mca/edc_mca.c edc_mca
Add a driver for IBM ESDI disk controllers. Tested with IBM Integ. ESDI Fixed Disk & Controller only at the moment. This driver still needs some touchup (error recovery is not quite good, MCA DMA controller goo should be moved to driver independant location), but is working enough to be usable for others. And I want this under CVS control :) Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).
2001-04-19 11:30:24 +04:00
device ed: disk
Use "edc" instead of "dasd". As pointed out by Soren, dasd doesn't mean anything special in IBM-talk. And edc better matches prior art, too.
2001-04-19 21:17:28 +04:00
attach ed at edc with ed_mca
Add a driver for IBM ESDI disk controllers. Tested with IBM Integ. ESDI Fixed Disk & Controller only at the moment. This driver still needs some touchup (error recovery is not quite good, MCA DMA controller goo should be moved to driver independant location), but is working enough to be usable for others. And I want this under CVS control :) Thanks to Scott Telford <st@epcc.ed.ac.uk> for providing me docs for these devices (IBM DASD Storage Interface Specification for MCA rev. 2.2).
2001-04-19 11:30:24 +04:00
file dev/mca/ed_mca.c ed_mca needs-flag
Add MCA ne(4) attachment for Novell NE/2 Ethernet adapter and clones. Tested with NE/2 card provided to me by Hans Hubner <hans@Huebner.ORG>. The Compex and Arco cards were not tested. According to Linux ne2 driver, they should work same way as NE/2.
2001-04-20 11:37:42 +04:00
# Novell NE2000, and clones
attach ne at mca with ne_mca
file dev/mca/if_ne_mca.c ne_mca
Compact autoconf info by printing the IRQ number together with 'at mca0 slot foo' info.
2001-04-23 10:10:08 +04:00
# AMD am7990 (Lance) -based boards
Add driver for SKNET Personal and MC+ - AMD Lance 7990 based ethernet cards. Both models tested and seem to be quite stable and fast. Thanks to: - Hans Hubner <hans@Huebner.org> for giving me the cards for testing - Georg Klug of Syskonnect, who provided me with hw docs for these cards, very promptly and willingly - I wish all vendors would be like this - Alfred Arnold, Linux SKNET driver author, for giving me valuable Syskonnect contact :)
2001-04-27 22:03:40 +04:00
attach le at mca with le_mca: le24
Compact autoconf info by printing the IRQ number together with 'at mca0 slot foo' info.
2001-04-23 10:10:08 +04:00
file dev/mca/if_le_mca.c le_mca
Nonworking NCR 53c90 attachment. I don't get any interrupts from the device yet, need to find real NCR53c90 docs to figure out what's wrong.
2001-12-01 13:42:38 +03:00
# NCR 53C90 (nonworking)
attach esp at mca with esp_mca
file dev/mca/esp_mca.c esp_mca