NetBSD/sys/lib/libsa/cd9660.c

411 lines
9.5 KiB
C
Raw Normal View History

Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
/* $NetBSD: cd9660.c,v 1.8 1999/03/31 01:50:25 cgd Exp $ */
/*
* Copyright (C) 1996 Wolfgang Solfrank.
* Copyright (C) 1996 TooLs GmbH.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by TooLs GmbH.
* 4. The name of TooLs GmbH may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Stand-alone ISO9660 file reading package.
*
* Note: This doesn't support Rock Ridge extensions, extended attributes,
* blocksizes other than 2048 bytes, multi-extent files, etc.
*/
#include <sys/param.h>
#ifdef _STANDALONE
#include <lib/libkern/libkern.h>
#else
#include <string.h>
#endif
#include <isofs/cd9660/iso.h>
#include "stand.h"
#include "cd9660.h"
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
/*
* XXX Does not currently implement:
* XXX
* XXX LIBSA_NO_FS_SYMLINK (does this even make sense?)
* XXX LIBSA_FS_SINGLECOMPONENT
*/
struct file {
off_t off; /* Current offset within file */
daddr_t bno; /* Starting block number */
off_t size; /* Size of file */
};
struct ptable_ent {
char namlen [ISODCL( 1, 1)]; /* 711 */
char extlen [ISODCL( 2, 2)]; /* 711 */
char block [ISODCL( 3, 6)]; /* 732 */
char parent [ISODCL( 7, 8)]; /* 722 */
char name [1];
};
#define PTFIXSZ 8
#define PTSIZE(pp) roundup(PTFIXSZ + isonum_711((pp)->namlen), 2)
#define cdb2devb(bno) ((bno) * ISO_DEFAULT_BLOCK_SIZE / DEV_BSIZE)
1999-02-11 12:10:43 +03:00
static int toupper __P((int));
static int pnmatch __P((char *, struct ptable_ent *));
static int dirmatch __P((char *, struct iso_directory_record *));
static int
toupper(c)
int c;
{
return c >= 'a' && c <= 'z' ? c - 'a' + 'A' : c;
}
static int
pnmatch(path, pp)
char *path;
struct ptable_ent *pp;
{
char *cp;
int i;
cp = pp->name;
for (i = isonum_711(pp->namlen); --i >= 0; path++, cp++) {
if (toupper(*path) == *cp)
continue;
return 0;
}
if (*path != '/')
return 0;
return 1;
}
static int
dirmatch(path, dp)
char *path;
struct iso_directory_record *dp;
{
char *cp;
int i;
/* This needs to be a regular file */
if (dp->flags[0] & 6)
return 0;
cp = dp->name;
for (i = isonum_711(dp->name_len); --i >= 0; path++, cp++) {
if (!*path)
break;
if (toupper(*path) == *cp)
continue;
return 0;
}
if (*path)
return 0;
/*
* Allow stripping of trailing dots and the version number.
* Note that this will find the first instead of the last version
* of a file.
*/
if (i >= 0 && (*cp == ';' || *cp == '.')) {
/* This is to prevent matching of numeric extensions */
if (*cp == '.' && cp[1] != ';')
return 0;
while (--i >= 0)
if (*++cp != ';' && (*cp < '0' || *cp > '9'))
return 0;
}
return 1;
}
int
cd9660_open(path, f)
char *path;
struct open_file *f;
{
struct file *fp = 0;
void *buf;
struct iso_primary_descriptor *vd;
size_t buf_size, read, psize, dsize;
daddr_t bno;
int parent, ent;
struct ptable_ent *pp;
1997-06-13 18:29:50 +04:00
struct iso_directory_record *dp = 0;
int rc;
/* First find the volume descriptor */
buf = alloc(buf_size = ISO_DEFAULT_BLOCK_SIZE);
vd = buf;
for (bno = 16;; bno++) {
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ, cdb2devb(bno),
ISO_DEFAULT_BLOCK_SIZE, buf, &read);
if (rc)
goto out;
if (read != ISO_DEFAULT_BLOCK_SIZE) {
rc = EIO;
goto out;
}
rc = EINVAL;
if (bcmp(vd->id, ISO_STANDARD_ID, sizeof vd->id) != 0)
goto out;
if (isonum_711(vd->type) == ISO_VD_END)
goto out;
if (isonum_711(vd->type) == ISO_VD_PRIMARY)
break;
}
if (isonum_723(vd->logical_block_size) != ISO_DEFAULT_BLOCK_SIZE)
goto out;
/* Now get the path table and lookup the directory of the file */
bno = isonum_732(vd->type_m_path_table);
psize = isonum_733(vd->path_table_size);
if (psize > ISO_DEFAULT_BLOCK_SIZE) {
free(buf, ISO_DEFAULT_BLOCK_SIZE);
buf = alloc(buf_size = roundup(psize, ISO_DEFAULT_BLOCK_SIZE));
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ, cdb2devb(bno),
buf_size, buf, &read);
if (rc)
goto out;
if (read != buf_size) {
rc = EIO;
goto out;
}
parent = 1;
pp = (struct ptable_ent *)buf;
ent = 1;
bno = isonum_732(pp->block) + isonum_711(pp->extlen);
rc = ENOENT;
while (*path) {
if ((caddr_t)pp >= (caddr_t)buf + psize)
break;
if (isonum_722(pp->parent) != parent)
break;
if (!pnmatch(path, pp)) {
pp = (struct ptable_ent *)((caddr_t)pp + PTSIZE(pp));
ent++;
continue;
}
path += isonum_711(pp->namlen) + 1;
parent = ent;
bno = isonum_732(pp->block) + isonum_711(pp->extlen);
while ((caddr_t)pp < (caddr_t)buf + psize) {
if (isonum_722(pp->parent) == parent)
break;
pp = (struct ptable_ent *)((caddr_t)pp + PTSIZE(pp));
ent++;
}
}
/* Now bno has the start of the directory that supposedly contains the file */
bno--;
dsize = 1; /* Something stupid, but > 0 XXX */
for (psize = 0; psize < dsize;) {
if (!(psize % ISO_DEFAULT_BLOCK_SIZE)) {
bno++;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ,
cdb2devb(bno),
ISO_DEFAULT_BLOCK_SIZE,
buf, &read);
if (rc)
goto out;
if (read != ISO_DEFAULT_BLOCK_SIZE) {
rc = EIO;
goto out;
}
dp = (struct iso_directory_record *)buf;
}
if (!isonum_711(dp->length)) {
if ((void *)dp == buf)
psize += ISO_DEFAULT_BLOCK_SIZE;
else
psize = roundup(psize, ISO_DEFAULT_BLOCK_SIZE);
continue;
}
if (dsize == 1)
dsize = isonum_733(dp->size);
if (dirmatch(path, dp))
break;
psize += isonum_711(dp->length);
dp = (struct iso_directory_record *)((caddr_t)dp + isonum_711(dp->length));
}
if (psize >= dsize) {
rc = ENOENT;
goto out;
}
/* allocate file system specific data structure */
fp = alloc(sizeof(struct file));
bzero(fp, sizeof(struct file));
f->f_fsdata = (void *)fp;
fp->off = 0;
fp->bno = isonum_733(dp->extent);
fp->size = isonum_733(dp->size);
free(buf, buf_size);
return 0;
out:
if (fp)
free(fp, sizeof(struct file));
free(buf, buf_size);
return rc;
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_FS_CLOSE)
int
cd9660_close(f)
struct open_file *f;
{
struct file *fp = (struct file *)f->f_fsdata;
f->f_fsdata = 0;
free(fp, sizeof *fp);
return 0;
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !defined(LIBSA_NO_FS_CLOSE) */
int
cd9660_read(f, start, size, resid)
struct open_file *f;
void *start;
size_t size;
size_t *resid;
{
struct file *fp = (struct file *)f->f_fsdata;
int rc = 0;
daddr_t bno;
char buf[ISO_DEFAULT_BLOCK_SIZE];
char *dp;
size_t read, off;
while (size) {
if (fp->off < 0 || fp->off >= fp->size)
break;
bno = fp->off / ISO_DEFAULT_BLOCK_SIZE + fp->bno;
if (fp->off & (ISO_DEFAULT_BLOCK_SIZE - 1)
|| size < ISO_DEFAULT_BLOCK_SIZE)
dp = buf;
else
dp = start;
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_TWIDDLE)
twiddle();
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif
rc = DEV_STRATEGY(f->f_dev)(f->f_devdata, F_READ, cdb2devb(bno),
ISO_DEFAULT_BLOCK_SIZE, dp, &read);
if (rc)
return rc;
if (read != ISO_DEFAULT_BLOCK_SIZE)
return EIO;
if (dp == buf) {
off = fp->off & (ISO_DEFAULT_BLOCK_SIZE - 1);
if (read > off + size)
read = off + size;
read -= off;
bcopy(buf + off, start, read);
start = (caddr_t)start + read;
fp->off += read;
size -= read;
} else {
start = (caddr_t)start + ISO_DEFAULT_BLOCK_SIZE;
fp->off += ISO_DEFAULT_BLOCK_SIZE;
size -= ISO_DEFAULT_BLOCK_SIZE;
}
}
if (resid)
*resid = size;
return rc;
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_FS_WRITE)
int
cd9660_write(f, start, size, resid)
struct open_file *f;
void *start;
size_t size;
size_t *resid;
{
return EROFS;
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !defined(LIBSA_NO_FS_WRITE) */
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#if !defined(LIBSA_NO_FS_SEEK)
off_t
cd9660_seek(f, offset, where)
struct open_file *f;
off_t offset;
int where;
{
struct file *fp = (struct file *)f->f_fsdata;
switch (where) {
case SEEK_SET:
fp->off = offset;
break;
case SEEK_CUR:
fp->off += offset;
break;
case SEEK_END:
fp->off = fp->size - offset;
break;
default:
return -1;
}
return fp->off;
}
Make a bunch of backward-compatible changes to the boot blocks which allow size to be reduced substantially. (backward compatibility verified by compiling one of the alpha boot blocks which uses all of the code before and after, diffing the object files, and manually verifying that the differences were 'correct'. some differences were "unavoidable," it wanting to avoid a double-commit, because e.g. local variables which were previously used were no longer used.) a README which describes supported options (or at least the ones mentioned below) is forthcoming. add support for the preprocessor macro LIBSA_NO_TWIDDLE, which causes calls to twiddle() to be omitted if it's defined. add support for the preprocessor macros: LIBSA_NO_FS_CLOSE LIBSA_NO_FS_WRITE LIBSA_NO_FS_SEEK which, if defined, cause the corresponding file system operations in the individual file system implementations to be omitted. (note that all of those macros are not supported by all file systems at this point. comments were added to individual file system files to indicate lack of support, and should be cleaned up later. Backward compatibility options e.g. UFS_NOCLOSE, etc., are supported.) add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which removes support for symbolic links from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which removes all subdirectory and symlink support from the file system support functions. (same notes as for the macros above apply.) add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which causes code relating to libsa file descriptor checks (e.g. range checking and checking that a file descriptor is valid) to be omitted if it's defined. add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which causes code relating to raw device access to be omitted if it's defined. change some structure copies to use bcopy() instead. that way use of bcopy vs. memcpy() can easily be selected by LIBSA_USE_MEMCPY. (without changes like these, you could end up having both bcopy() and memcpy() included. eventually, all calls to bcopy should be changed to calls to memcpy() or memmove() as appropriate -- hopefully never the latter -- with an option to use bcopy instead.) add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which causes disklabel() to return '1' as msg rather than a string. Can be used if the boot blocks don't care about the string, and need to save the space. add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which if defined causes all of the file system switch code to be removed. Its value should be the name of the file system supported by the boot block, e.g. "ufs" for the FFS file system. calls to the file system functions open, close, etc., which were previously done through a function switch are then done via direct invocation of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...). add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device switch table. Device entry pointes are expected to be named <dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE is set to 'disk' is diskstrategy. make ufs.c f_nindir array be unsigned ints. the fact that it was signed caused ufs.c to require signed division routines (which were otherwise unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
#endif /* !defined(LIBSA_NO_FS_SEEK) */
int
cd9660_stat(f, sb)
struct open_file *f;
struct stat *sb;
{
struct file *fp = (struct file *)f->f_fsdata;
/* only importatn stuff */
sb->st_mode = S_IFREG | S_IRUSR | S_IRGRP | S_IROTH;
sb->st_uid = sb->st_gid = 0;
sb->st_size = fp->size;
return 0;
}