NetBSD/sys/arch/sun3/sun3x/clock.c

718 lines
17 KiB
C
Raw Normal View History

2001-02-03 15:40:58 +03:00
/* $NetBSD: clock.c,v 1.18 2001/02/03 12:40:59 tsutsui Exp $ */
/*
* Copyright (c) 1994 Gordon W. Ross
* Copyright (c) 1993 Adam Glass
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1982, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah Hdr: clock.c 1.18 91/01/21$
* from: @(#)clock.c 8.2 (Berkeley) 1/12/94
*/
/*
1997-04-25 22:31:37 +04:00
* Machine-dependent clock routines. Sun3X machines may have
* either the Mostek 48T02 or the Intersil 7170 clock.
*
* It is tricky to determine which you have, because there is
* always something responding at the address where the Mostek
* clock might be found: either a Mostek or plain-old EEPROM.
* Therefore, we cheat. If we find an Intersil clock, assume
* that what responds at the end of the EEPROM space is just
* plain-old EEPROM (not a Mostek clock). Worse, there are
* H/W problems with probing for an Intersil on the 3/80, so
* on that machine we "know" there is a Mostek clock.
*
* Note that the probing algorithm described above requires
* that we probe the intersil before we probe the mostek!
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <m68k/asm_single.h>
#include <machine/autoconf.h>
#include <machine/cpu.h>
1997-04-25 22:31:37 +04:00
#include <machine/idprom.h>
#include <machine/leds.h>
#include <dev/clock_subr.h>
#include <dev/ic/intersil7170.h>
1998-02-05 07:56:24 +03:00
#include <sun3/sun3/machdep.h>
#include <sun3/sun3/interreg.h>
#include <sun3/sun3x/mk48t02.h>
1997-04-25 22:31:37 +04:00
#define SUN3_470 Yes
#define CLOCK_PRI 5
#define IREG_CLK_BITS (IREG_CLOCK_ENAB_7 | IREG_CLOCK_ENAB_5)
1997-04-25 22:31:37 +04:00
/*
* Only one of these two variables should be non-zero after
* autoconfiguration determines which clock we have.
*/
static volatile void *intersil_va;
static volatile void *mostek_clk_va;
void _isr_clock __P((void)); /* in locore.s */
void clock_intr __P((struct clockframe));
static int clock_match __P((struct device *, struct cfdata *, void *args));
static void clock_attach __P((struct device *, struct device *, void *));
struct cfattach clock_ca = {
sizeof(struct device), clock_match, clock_attach
};
1997-04-25 22:31:37 +04:00
#ifdef SUN3_470
#define intersil_clock ((volatile struct intersil7170 *) intersil_va)
#define intersil_command(run, interrupt) \
(run | interrupt | INTERSIL_CMD_FREQ_32K | INTERSIL_CMD_24HR_MODE | \
INTERSIL_CMD_NORMAL_MODE)
#define intersil_clear() (void)intersil_clock->clk_intr_reg
static int oclock_match __P((struct device *, struct cfdata *, void *args));
static void oclock_attach __P((struct device *, struct device *, void *));
struct cfattach oclock_ca = {
sizeof(struct device), oclock_match, oclock_attach
};
/*
1997-04-25 22:31:37 +04:00
* Is there an intersil clock?
*/
1997-04-25 22:31:37 +04:00
static int
oclock_match(parent, cf, args)
struct device *parent;
struct cfdata *cf;
void *args;
{
struct confargs *ca = args;
/* This driver only supports one unit. */
2001-02-03 15:40:58 +03:00
if (intersil_va)
1997-04-25 22:31:37 +04:00
return (0);
/*
* The 3/80 can not probe the Intersil absent,
* but it never has one, so "just say no."
*/
if (cpu_machine_id == SUN3X_MACH_80)
return (0);
/* OK, really probe for the Intersil. */
if (bus_peek(ca->ca_bustype, ca->ca_paddr, 1) == -1)
return (0);
/* Default interrupt priority. */
if (ca->ca_intpri == -1)
ca->ca_intpri = CLOCK_PRI;
1997-04-25 22:31:37 +04:00
return (1);
}
/*
* Attach the intersil clock.
*/
static void
oclock_attach(parent, self, args)
struct device *parent;
struct device *self;
void *args;
{
1997-04-25 22:31:37 +04:00
struct confargs *ca = args;
caddr_t va;
printf("\n");
/* Get a mapping for it. */
1998-02-05 07:56:24 +03:00
va = bus_mapin(ca->ca_bustype,
ca->ca_paddr, sizeof(struct intersil7170));
1997-04-25 22:31:37 +04:00
if (!va)
panic("oclock_attach");
intersil_va = va;
#ifdef DIAGNOSTIC
/* Verify correct probe order... */
if (mostek_clk_va) {
mostek_clk_va = 0;
printf("%s: warning - mostek found also!\n",
self->dv_xname);
}
1997-04-25 22:31:37 +04:00
#endif
/*
* Set the clock to the correct interrupt rate, but
* do not enable the interrupt until cpu_initclocks.
* XXX: Actually, the interrupt_reg should be zero
* at this point, so the clock interrupts should not
* affect us, but we need to set the rate...
*/
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_RUN, INTERSIL_CMD_IDISABLE);
intersil_clear();
/* Set the clock to 100 Hz, but do not enable it yet. */
intersil_clock->clk_intr_reg = INTERSIL_INTER_CSECONDS;
/*
* Can not hook up the ISR until cpu_initclocks()
* because hardclock is not ready until then.
* For now, the handler is _isr_autovec(), which
* will complain if it gets clock interrupts.
*/
}
1997-04-25 22:31:37 +04:00
#endif /* SUN3_470 */
/*
1997-04-25 22:31:37 +04:00
* Is there a Mostek clock? Hard to tell...
* (See comment at top of this file.)
*/
static int
clock_match(parent, cf, args)
struct device *parent;
struct cfdata *cf;
void *args;
{
struct confargs *ca = args;
/* This driver only supports one unit. */
2001-02-03 15:40:58 +03:00
if (mostek_clk_va)
return (0);
1997-04-25 22:31:37 +04:00
/* If intersil was found, use that. */
if (intersil_va)
return (0);
/* Else assume a Mostek is there... */
/* Default interrupt priority. */
if (ca->ca_intpri == -1)
ca->ca_intpri = CLOCK_PRI;
return (1);
}
1997-04-25 22:31:37 +04:00
/*
* Attach the mostek clock.
*/
static void
clock_attach(parent, self, args)
struct device *parent;
struct device *self;
void *args;
{
1997-04-25 22:31:37 +04:00
struct confargs *ca = args;
caddr_t va;
printf("\n");
1997-04-25 22:31:37 +04:00
/* Get a mapping for it. */
1998-02-05 07:56:24 +03:00
va = bus_mapin(ca->ca_bustype,
ca->ca_paddr, sizeof(struct mostek_clkreg));
1997-04-25 22:31:37 +04:00
if (!va)
panic("clock_attach");
mostek_clk_va = va;
/*
* Can not hook up the ISR until cpu_initclocks()
* because hardclock is not ready until then.
* For now, the handler is _isr_autovec(), which
* will complain if it gets clock interrupts.
*/
}
/*
* Set and/or clear the desired clock bits in the interrupt
* register. We have to be extremely careful that we do it
* in such a manner that we don't get ourselves lost.
* XXX: Watch out! It's really easy to break this!
*/
void
set_clk_mode(on, off, enable_clk)
u_char on, off;
int enable_clk;
{
register u_char interreg;
/*
* If we have not yet mapped the register,
* then we do not want to do any of this...
*/
if (!interrupt_reg)
return;
#ifdef DIAGNOSTIC
/* Assertion: were are at splhigh! */
if ((getsr() & PSL_IPL) < PSL_IPL7)
panic("set_clk_mode: bad ipl");
#endif
/*
* make sure that we are only playing w/
* clock interrupt register bits
*/
on &= IREG_CLK_BITS;
off &= IREG_CLK_BITS;
/* First, turn off the "master" enable bit. */
single_inst_bclr_b(*interrupt_reg, IREG_ALL_ENAB);
/*
* Save the current interrupt register clock bits,
* and turn off/on the requested bits in the copy.
*/
interreg = *interrupt_reg & IREG_CLK_BITS;
interreg &= ~off;
interreg |= on;
/* Clear the CLK5 and CLK7 bits to clear the flip-flops. */
single_inst_bclr_b(*interrupt_reg, IREG_CLK_BITS);
#ifdef SUN3_470
if (intersil_va) {
/*
* Then disable clock interrupts, and read the clock's
* interrupt register to clear any pending signals there.
*/
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_RUN, INTERSIL_CMD_IDISABLE);
intersil_clear();
}
#endif /* SUN3_470 */
/* Set the requested bits in the interrupt register. */
single_inst_bset_b(*interrupt_reg, interreg);
#ifdef SUN3_470
/* Turn the clock back on (maybe) */
if (intersil_va && enable_clk)
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_RUN, INTERSIL_CMD_IENABLE);
#endif /* SUN3_470 */
/* Finally, turn the "master" enable back on. */
single_inst_bset_b(*interrupt_reg, IREG_ALL_ENAB);
}
/*
* Set up the real-time clock (enable clock interrupts).
* Leave stathz 0 since there is no secondary clock available.
* Note that clock interrupts MUST STAY DISABLED until here.
*/
void
cpu_initclocks(void)
{
int s;
s = splhigh();
/* Install isr (in locore.s) that calls clock_intr(). */
isr_add_custom(CLOCK_PRI, (void*)_isr_clock);
/* Now enable the clock at level 5 in the interrupt reg. */
set_clk_mode(IREG_CLOCK_ENAB_5, 0, 1);
splx(s);
}
/*
* This doesn't need to do anything, as we have only one timer and
* profhz==stathz==hz.
*/
void
setstatclockrate(newhz)
int newhz;
{
/* nothing */
}
/*
1997-04-25 22:31:37 +04:00
* Clock interrupt handler (for both Intersil and Mostek).
* XXX - Is it worth the trouble to save a few cycles here
* by making two separate interrupt handlers?
*
* This is is called by the "custom" interrupt handler.
* Note that we can get ZS interrupts while this runs,
* and zshard may touch the interrupt_reg, so we must
* be careful to use the single_inst_* macros to modify
* the interrupt register atomically.
*/
void
clock_intr(cf)
struct clockframe cf;
{
1997-04-25 22:31:37 +04:00
extern char _Idle[]; /* locore.s */
#ifdef SUN3_470
if (intersil_va) {
/* Read the clock interrupt register. */
intersil_clear();
}
#endif /* SUN3_470 */
/* Pulse the clock intr. enable low. */
single_inst_bclr_b(*interrupt_reg, IREG_CLOCK_ENAB_5);
single_inst_bset_b(*interrupt_reg, IREG_CLOCK_ENAB_5);
1997-04-25 22:31:37 +04:00
#ifdef SUN3_470
if (intersil_va) {
/* Read the clock intr. reg. AGAIN! */
intersil_clear();
}
#endif /* SUN3_470 */
/* Entertainment! */
if (cf.cf_pc == (long)_Idle)
leds_intr();
/* Call common clock interrupt handler. */
hardclock(&cf);
}
/*
* Return the best possible estimate of the time in the timeval
* to which tvp points. We do this by returning the current time
* plus the amount of time since the last clock interrupt.
*
* Check that this time is no less than any previously-reported time,
* which could happen around the time of a clock adjustment. Just for
* fun, we guarantee that the time will be greater than the value
* obtained by a previous call.
*/
void
microtime(tvp)
register struct timeval *tvp;
{
int s = splhigh();
static struct timeval lasttime;
*tvp = time;
tvp->tv_usec++; /* XXX */
2000-01-19 05:52:16 +03:00
while (tvp->tv_usec >= 1000000) {
tvp->tv_sec++;
tvp->tv_usec -= 1000000;
}
if (tvp->tv_sec == lasttime.tv_sec &&
tvp->tv_usec <= lasttime.tv_usec &&
2000-01-19 05:52:16 +03:00
(tvp->tv_usec = lasttime.tv_usec + 1) >= 1000000)
{
tvp->tv_sec++;
tvp->tv_usec -= 1000000;
}
lasttime = *tvp;
splx(s);
}
/*
* Machine-dependent clock routines.
*
* Inittodr initializes the time of day hardware which provides
* date functions.
*
* Resettodr restores the time of day hardware after a time change.
*/
1997-04-25 22:31:37 +04:00
static long clk_get_secs __P((void));
static void clk_set_secs __P((long));
/*
* Initialize the time of day register, based on the time base
* which is, e.g. from a filesystem.
*/
void inittodr(fs_time)
time_t fs_time;
{
long diff, clk_time;
long long_ago = (5 * SECYR);
int clk_bad = 0;
/*
* Sanity check time from file system.
* If it is zero,assume filesystem time is just unknown
* instead of preposterous. Don't bark.
*/
if (fs_time < long_ago) {
/*
* If fs_time is zero, assume filesystem time is just
* unknown instead of preposterous. Don't bark.
*/
if (fs_time != 0)
printf("WARNING: preposterous time in file system\n");
/* 1991/07/01 12:00:00 */
fs_time = 21*SECYR + 186*SECDAY + SECDAY/2;
}
clk_time = clk_get_secs();
/* Sanity check time from clock. */
if (clk_time < long_ago) {
printf("WARNING: bad date in battery clock");
clk_bad = 1;
clk_time = fs_time;
} else {
/* Does the clock time jive with the file system? */
diff = clk_time - fs_time;
if (diff < 0)
diff = -diff;
if (diff >= (SECDAY*2)) {
printf("WARNING: clock %s %d days",
(clk_time < fs_time) ? "lost" : "gained",
(int) (diff / SECDAY));
clk_bad = 1;
}
}
if (clk_bad)
printf(" -- CHECK AND RESET THE DATE!\n");
time.tv_sec = clk_time;
}
/*
* Resettodr restores the time of day hardware after a time change.
*/
void resettodr()
{
clk_set_secs(time.tv_sec);
}
1997-04-25 22:31:37 +04:00
/*
* Now routines to get and set clock as POSIX time.
* Our clock keeps "years since 1/1/1968".
*/
#define CLOCK_BASE_YEAR 1968
#ifdef SUN3_470
static void intersil_get_dt __P((struct clock_ymdhms *));
static void intersil_set_dt __P((struct clock_ymdhms *));
#endif /* SUN3_470 */
static void mostek_get_dt __P((struct clock_ymdhms *));
static void mostek_set_dt __P((struct clock_ymdhms *));
static long
clk_get_secs()
{
struct clock_ymdhms dt;
long secs;
bzero(&dt, sizeof(dt));
#ifdef SUN3_470
if (intersil_va)
intersil_get_dt(&dt);
#endif /* SUN3_470 */
if (mostek_clk_va) {
/* Read the Mostek. */
mostek_get_dt(&dt);
/* Convert BCD values to binary. */
dt.dt_sec = FROMBCD(dt.dt_sec);
dt.dt_min = FROMBCD(dt.dt_min);
dt.dt_hour = FROMBCD(dt.dt_hour);
dt.dt_day = FROMBCD(dt.dt_day);
dt.dt_mon = FROMBCD(dt.dt_mon);
dt.dt_year = FROMBCD(dt.dt_year);
}
if ((dt.dt_hour > 24) ||
(dt.dt_day > 31) ||
(dt.dt_mon > 12))
return (0);
dt.dt_year += CLOCK_BASE_YEAR;
secs = clock_ymdhms_to_secs(&dt);
return (secs);
}
static void
clk_set_secs(secs)
long secs;
{
struct clock_ymdhms dt;
clock_secs_to_ymdhms(secs, &dt);
dt.dt_year -= CLOCK_BASE_YEAR;
#ifdef SUN3_470
if (intersil_va)
intersil_set_dt(&dt);
#endif /* SUN3_470 */
if (mostek_clk_va) {
/* Convert binary values to BCD. */
dt.dt_sec = TOBCD(dt.dt_sec);
dt.dt_min = TOBCD(dt.dt_min);
dt.dt_hour = TOBCD(dt.dt_hour);
dt.dt_day = TOBCD(dt.dt_day);
dt.dt_mon = TOBCD(dt.dt_mon);
dt.dt_year = TOBCD(dt.dt_year);
/* Write the Mostek. */
mostek_set_dt(&dt);
}
}
#ifdef SUN3_470
/*
* Routines to copy state into and out of the clock.
* The intersil registers have to be read or written
* in sequential order (or so it appears). -gwr
*/
static void
intersil_get_dt(struct clock_ymdhms *dt)
{
volatile struct intersil_dt *isdt;
int s;
isdt = &intersil_clock->counters;
s = splhigh();
/* Enable read (stop time) */
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_STOP, INTERSIL_CMD_IENABLE);
/* Copy the info. Careful about the order! */
dt->dt_sec = isdt->dt_csec; /* throw-away */
dt->dt_hour = isdt->dt_hour;
dt->dt_min = isdt->dt_min;
dt->dt_sec = isdt->dt_sec;
dt->dt_mon = isdt->dt_month;
dt->dt_day = isdt->dt_day;
dt->dt_year = isdt->dt_year;
dt->dt_wday = isdt->dt_dow;
/* Done reading (time wears on) */
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_RUN, INTERSIL_CMD_IENABLE);
splx(s);
}
static void
intersil_set_dt(struct clock_ymdhms *dt)
{
volatile struct intersil_dt *isdt;
int s;
isdt = &intersil_clock->counters;
s = splhigh();
/* Enable write (stop time) */
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_STOP, INTERSIL_CMD_IENABLE);
/* Copy the info. Careful about the order! */
isdt->dt_csec = 0;
isdt->dt_hour = dt->dt_hour;
isdt->dt_min = dt->dt_min;
isdt->dt_sec = dt->dt_sec;
isdt->dt_month= dt->dt_mon;
isdt->dt_day = dt->dt_day;
isdt->dt_year = dt->dt_year;
isdt->dt_dow = dt->dt_wday;
/* Done writing (time wears on) */
intersil_clock->clk_cmd_reg =
intersil_command(INTERSIL_CMD_RUN, INTERSIL_CMD_IENABLE);
splx(s);
}
#endif /* SUN3_470 */
/*
* Routines to copy state into and out of the clock.
* The clock CSR has to be set for read or write.
*/
static void
1997-04-25 22:31:37 +04:00
mostek_get_dt(struct clock_ymdhms *dt)
{
1997-04-25 22:31:37 +04:00
volatile struct mostek_clkreg *cl = mostek_clk_va;
int s;
s = splhigh();
/* enable read (stop time) */
cl->cl_csr |= CLK_READ;
/* Copy the info */
dt->dt_sec = cl->cl_sec;
dt->dt_min = cl->cl_min;
dt->dt_hour = cl->cl_hour;
dt->dt_wday = cl->cl_wday;
dt->dt_day = cl->cl_mday;
dt->dt_mon = cl->cl_month;
dt->dt_year = cl->cl_year;
/* Done reading (time wears on) */
cl->cl_csr &= ~CLK_READ;
splx(s);
}
static void
1997-04-25 22:31:37 +04:00
mostek_set_dt(struct clock_ymdhms *dt)
{
1997-04-25 22:31:37 +04:00
volatile struct mostek_clkreg *cl = mostek_clk_va;
int s;
s = splhigh();
/* enable write */
cl->cl_csr |= CLK_WRITE;
/* Copy the info */
cl->cl_sec = dt->dt_sec;
cl->cl_min = dt->dt_min;
cl->cl_hour = dt->dt_hour;
cl->cl_wday = dt->dt_wday;
cl->cl_mday = dt->dt_day;
cl->cl_month = dt->dt_mon;
cl->cl_year = dt->dt_year;
/* load them up */
cl->cl_csr &= ~CLK_WRITE;
splx(s);
}