Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/crypto/external/bsd/openssh/dist/dns.c

353 lines
9.1 KiB
C
Raw Normal View History

OpenSSH 8.5/8.5p1 (2021-03-03) OpenSSH 8.5 was released on 2021-03-03. It is available from the mirrors listed at https://www.openssh.com/. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: https://www.openssh.com/donations.html Future deprecation notice ========================= It is now possible[1] to perform chosen-prefix attacks against the SHA-1 algorithm for less than USD$50K. In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1 hash algorithm in conjunction with the RSA public key algorithm. OpenSSH will disable this signature scheme by default in the near future. Note that the deactivation of "ssh-rsa" signatures does not necessarily require cessation of use for RSA keys. In the SSH protocol, keys may be capable of signing using multiple algorithms. In particular, "ssh-rsa" keys are capable of signing using "rsa-sha2-256" (RSA/SHA256), "rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of these is being turned off by default. This algorithm is unfortunately still used widely despite the existence of better alternatives, being the only remaining public key signature algorithm specified by the original SSH RFCs that is still enabled by default. The better alternatives include: * The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These algorithms have the advantage of using the same key type as "ssh-rsa" but use the safe SHA-2 hash algorithms. These have been supported since OpenSSH 7.2 and are already used by default if the client and server support them. * The RFC8709 ssh-ed25519 signature algorithm. It has been supported in OpenSSH since release 6.5. * The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These have been supported by OpenSSH since release 5.7. To check whether a server is using the weak ssh-rsa public key algorithm, for host authentication, try to connect to it after removing the ssh-rsa algorithm from ssh(1)'s allowed list: ssh -oHostKeyAlgorithms=-ssh-rsa user@host If the host key verification fails and no other supported host key types are available, the server software on that host should be upgraded. This release enables the UpdateHostKeys option by default to assist the client by automatically migrating to better algorithms. [1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and Application to the PGP Web of Trust" Leurent, G and Peyrin, T (2020) https://eprint.iacr.org/2020/014.pdf Security ======== * ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket. On modern operating systems where the OS can provide information about the user identity connected to a socket, OpenSSH ssh-agent and sshd limit agent socket access only to the originating user and root. Additional mitigation may be afforded by the system's malloc(3)/free(3) implementation, if it detects double-free conditions. The most likely scenario for exploitation is a user forwarding an agent either to an account shared with a malicious user or to a host with an attacker holding root access. * Portable sshd(8): Prevent excessively long username going to PAM. This is a mitigation for a buffer overflow in Solaris' PAM username handling (CVE-2020-14871), and is only enabled for Sun-derived PAM implementations. This is not a problem in sshd itself, it only prevents sshd from being used as a vector to attack Solaris' PAM. It does not prevent the bug in PAM from being exploited via some other PAM application. GHPR212 Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519. * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes. * ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001. * ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. Per its designers, the sntrup4591761 algorithm was superseded almost two years ago by sntrup761. (note this both the updated method and the one that it replaced are disabled by default) * ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers. Changes since OpenSSH 8.4 ========================= New features ------------ * ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions: - The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile). - The same key does not exist under another name. - A certificate host key is not in use. - known_hosts contains no matching wildcard hostname pattern. - VerifyHostKeyDNS is not enabled. - The default UserKnownHostsFile is in use. We expect some of these conditions will be modified or relaxed in future. * ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists. * ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key. * ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys. * ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files. * ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS. * ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials. * sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit. Bugfixes -------- * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224 * sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR201 * ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded. * ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229 * ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client. * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253 * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms. * sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet. * ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078). * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206 * Minor man page fixes (capitalization, commas, etc.) bz#3223 * sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222 * ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879 * ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320 * sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239 * sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248. * ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250 * ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type. Portability ----------- * sshd(8): add a number of platform-specific syscalls to the Linux seccomp-bpf sandbox. bz#3232 bz#3260 * sshd(8): remove debug message from sigchld handler that could cause deadlock on some platforms. bz#3259 * Sync contrib/ssh-copy-id with upstream. * unittests: add a hostname function for systems that don't have it. Some systems don't have a hostname command (it's not required by POSIX). The do have uname -n (which is), but not all of those have it report the FQDN. Checksums: ========== - SHA1 (openssh-8.5.tar.gz) = 04cae43c389fb411227c01219e4eb46e3113f34e - SHA256 (openssh-8.5.tar.gz) = 5qB2CgzNG4io4DmChTjHgCWqRWvEOvCKJskLdJCz+SU= - SHA1 (openssh-8.5p1.tar.gz) = 72eadcbe313b07b1dd3b693e41d3cd56d354e24e - SHA256 (openssh-8.5p1.tar.gz) = 9S8/QdQpqpkY44zyAK8iXM3Y5m8FLaVyhwyJc3ZG7CU= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available from the mirror sites: https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc Please note that the OpenPGP key used to sign releases has been rotated for this release. The new key has been signed by the previous key to provide continuity. Reporting Bugs: =============== - Please read https://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com
2021-03-05 20:45:24 +03:00
/* $OpenBSD: dns.c,v 1.39 2020/10/18 11:32:01 djm Exp $ */
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
/*
* Copyright (c) 2003 Wesley Griffin. All rights reserved.
* Copyright (c) 2003 Jakob Schlyter. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
#include <stdio.h>
#include <string.h>
Changes since OpenSSH 6.6 ========================= Potentially-incompatible changes * sshd(8): The default set of ciphers and MACs has been altered to remove unsafe algorithms. In particular, CBC ciphers and arcfour* are disabled by default. The full set of algorithms remains available if configured explicitly via the Ciphers and MACs sshd_config options. * sshd(8): Support for tcpwrappers/libwrap has been removed. * OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of connections using the curve25519-sha256@libssh.org KEX exchange method to fail when connecting with something that implements the specification correctly. OpenSSH 6.7 disables this KEX method when speaking to one of the affected versions. New Features * Major internal refactoring to begin to make part of OpenSSH usable as a library. So far the wire parsing, key handling and KRL code has been refactored. Please note that we do not consider the API stable yet, nor do we offer the library in separable form. * ssh(1), sshd(8): Add support for Unix domain socket forwarding. A remote TCP port may be forwarded to a local Unix domain socket and vice versa or both ends may be a Unix domain socket. * ssh(1), ssh-keygen(1): Add support for SSHFP DNS records for ED25519 key types. * sftp(1): Allow resumption of interrupted uploads. * ssh(1): When rekeying, skip file/DNS lookups of the hostkey if it is the same as the one sent during initial key exchange; bz#2154 * sshd(8): Allow explicit ::1 and 127.0.0.1 forwarding bind addresses when GatewayPorts=no; allows client to choose address family; bz#2222 * sshd(8): Add a sshd_config PermitUserRC option to control whether ~/.ssh/rc is executed, mirroring the no-user-rc authorized_keys option; bz#2160 * ssh(1): Add a %C escape sequence for LocalCommand and ControlPath that expands to a unique identifer based on a hash of the tuple of (local host, remote user, hostname, port). Helps avoid exceeding miserly pathname limits for Unix domain sockets in multiplexing control paths; bz#2220 * sshd(8): Make the "Too many authentication failures" message include the user, source address, port and protocol in a format similar to the authentication success / failure messages; bz#2199 * Added unit and fuzz tests for refactored code. These are run automatically in portable OpenSSH via the "make tests" target. Bugfixes * sshd(8): Fix remote forwarding with the same listen port but different listen address. * ssh(1): Fix inverted test that caused PKCS#11 keys that were explicitly listed in ssh_config or on the commandline not to be preferred. * ssh-keygen(1): Fix bug in KRL generation: multiple consecutive revoked certificate serial number ranges could be serialised to an invalid format. Readers of a broken KRL caused by this bug will fail closed, so no should-have-been-revoked key will be accepted. * ssh(1): Reflect stdio-forward ("ssh -W host:port ...") failures in exit status. Previously we were always returning 0; bz#2255 * ssh(1), ssh-keygen(1): Make Ed25519 keys' title fit properly in the randomart border; bz#2247 * ssh-agent(1): Only cleanup agent socket in the main agent process and not in any subprocesses it may have started (e.g. forked askpass). Fixes agent sockets being zapped when askpass processes fatal(); bz#2236 * ssh-add(1): Make stdout line-buffered; saves partial output getting lost when ssh-add fatal()s part-way through (e.g. when listing keys from an agent that supports key types that ssh-add doesn't); bz#2234 * ssh-keygen(1): When hashing or removing hosts, don't choke on @revoked markers and don't remove @cert-authority markers; bz#2241 * ssh(1): Don't fatal when hostname canonicalisation fails and a ProxyCommand is in use; continue and allow the ProxyCommand to connect anyway (e.g. to a host with a name outside the DNS behind a bastion) * scp(1): When copying local->remote fails during read, don't send uninitialised heap to the remote end. * sftp(1): Fix fatal "el_insertstr failed" errors when tab-completing filenames with a single quote char somewhere in the string; bz#2238 * ssh-keyscan(1): Scan for Ed25519 keys by default. * ssh(1): When using VerifyHostKeyDNS with a DNSSEC resolver, down- convert any certificate keys to plain keys and attempt SSHFP resolution. Prevents a server from skipping SSHFP lookup and forcing a new-hostkey dialog by offering only certificate keys. * sshd(8): Avoid crash at exit via NULL pointer reference; bz#2225 * Fix some strict-alignment errors. Portable OpenSSH * Portable OpenSSH now supports building against libressl-portable. * Portable OpenSSH now requires openssl 0.9.8f or greater. Older versions are no longer supported. * In the OpenSSL version check, allow fix version upgrades (but not downgrades. Debian bug #748150. * sshd(8): On Cygwin, determine privilege separation user at runtime, since it may need to be a domain account. * sshd(8): Don't attempt to use vhangup on Linux. It doesn't work for non-root users, and for them it just messes up the tty settings. * Use CLOCK_BOOTTIME in preference to CLOCK_MONOTONIC when it is available. It considers time spent suspended, thereby ensuring timeouts (e.g. for expiring agent keys) fire correctly. bz#2228 * Add support for ed25519 to opensshd.init init script. * sftp-server(8): On platforms that support it, use prctl() to prevent sftp-server from accessing /proc/self/{mem,maps} Changes since OpenSSH 6.5 ========================= This is primarily a bugfix release. Security: * sshd(8): when using environment passing with a sshd_config(5) AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could be tricked into accepting any enviornment variable that contains the characters before the wildcard character. New / changed features: * ssh(1), sshd(8): this release removes the J-PAKE authentication code. This code was experimental, never enabled and had been unmaintained for some time. * ssh(1): when processing Match blocks, skip 'exec' clauses other clauses predicates failed to match. * ssh(1): if hostname canonicalisation is enabled and results in the destination hostname being changed, then re-parse ssh_config(5) files using the new destination hostname. This gives 'Host' and 'Match' directives that use the expanded hostname a chance to be applied. Bugfixes: * ssh(1): avoid spurious "getsockname failed: Bad file descriptor" in ssh -W. bz#2200, debian#738692 * sshd(8): allow the shutdown(2) syscall in seccomp-bpf and systrace sandbox modes, as it is reachable if the connection is terminated during the pre-auth phase. * ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1 bignum parsing. Minimum key length checks render this bug unexploitable to compromise SSH 1 sessions. * sshd_config(5): clarify behaviour of a keyword that appears in multiple matching Match blocks. bz#2184 * ssh(1): avoid unnecessary hostname lookups when canonicalisation is disabled. bz#2205 * sshd(8): avoid sandbox violation crashes in GSSAPI code by caching the supported list of GSSAPI mechanism OIDs before entering the sandbox. bz#2107 * ssh(1): fix possible crashes in SOCKS4 parsing caused by assumption that the SOCKS username is nul-terminated. * ssh(1): fix regression for UsePrivilegedPort=yes when BindAddress is not specified. * ssh(1), sshd(8): fix memory leak in ECDSA signature verification. * ssh(1): fix matching of 'Host' directives in ssh_config(5) files to be case-insensitive again (regression in 6.5). Portable OpenSSH: * sshd(8): don't fatal if the FreeBSD Capsicum is offered by the system headers and libc but is not supported by the kernel. * Fix build using the HP-UX compiler. Changes since OpenSSH 6.4 ========================= This is a feature-focused release. New features: * ssh(1), sshd(8): Add support for key exchange using elliptic-curve Diffie Hellman in Daniel Bernstein's Curve25519. This key exchange method is the default when both the client and server support it. * ssh(1), sshd(8): Add support for Ed25519 as a public key type. Ed25519 is a elliptic curve signature scheme that offers better security than ECDSA and DSA and good performance. It may be used for both user and host keys. * Add a new private key format that uses a bcrypt KDF to better protect keys at rest. This format is used unconditionally for Ed25519 keys, but may be requested when generating or saving existing keys of other types via the -o ssh-keygen(1) option. We intend to make the new format the default in the near future. Details of the new format are in the PROTOCOL.key file. * ssh(1), sshd(8): Add a new transport cipher "chacha20-poly1305@openssh.com" that combines Daniel Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an authenticated encryption mode. Details are in the PROTOCOL.chacha20poly1305 file. * ssh(1), sshd(8): Refuse RSA keys from old proprietary clients and servers that use the obsolete RSA+MD5 signature scheme. It will still be possible to connect with these clients/servers but only DSA keys will be accepted, and OpenSSH will refuse connection entirely in a future release. * ssh(1), sshd(8): Refuse old proprietary clients and servers that use a weaker key exchange hash calculation. * ssh(1): Increase the size of the Diffie-Hellman groups requested for each symmetric key size. New values from NIST Special Publication 800-57 with the upper limit specified by RFC4419. * ssh(1), ssh-agent(1): Support PKCS#11 tokens that only provide X.509 certs instead of raw public keys (requested as bz#1908). * ssh(1): Add a ssh_config(5) "Match" keyword that allows conditional configuration to be applied by matching on hostname, user and result of arbitrary commands. * ssh(1): Add support for client-side hostname canonicalisation using a set of DNS suffixes and rules in ssh_config(5). This allows unqualified names to be canonicalised to fully-qualified domain names to eliminate ambiguity when looking up keys in known_hosts or checking host certificate names. * sftp-server(8): Add the ability to whitelist and/or blacklist sftp protocol requests by name. * sftp-server(8): Add a sftp "fsync@openssh.com" to support calling fsync(2) on an open file handle. * sshd(8): Add a ssh_config(5) PermitTTY to disallow TTY allocation, mirroring the longstanding no-pty authorized_keys option. * ssh(1): Add a ssh_config ProxyUseFDPass option that supports the use of ProxyCommands that establish a connection and then pass a connected file descriptor back to ssh(1). This allows the ProxyCommand to exit rather than staying around to transfer data. Bugfixes: * ssh(1), sshd(8): Fix potential stack exhaustion caused by nested certificates. * ssh(1): bz#1211: make BindAddress work with UsePrivilegedPort. * sftp(1): bz#2137: fix the progress meter for resumed transfer. * ssh-add(1): bz#2187: do not request smartcard PIN when removing keys from ssh-agent. * sshd(8): bz#2139: fix re-exec fallback when original sshd binary cannot be executed. * ssh-keygen(1): Make relative-specified certificate expiry times relative to current time and not the validity start time. * sshd(8): bz#2161: fix AuthorizedKeysCommand inside a Match block. * sftp(1): bz#2129: symlinking a file would incorrectly canonicalise the target path. * ssh-agent(1): bz#2175: fix a use-after-free in the PKCS#11 agent helper executable. * sshd(8): Improve logging of sessions to include the user name, remote host and port, the session type (shell, command, etc.) and allocated TTY (if any). * sshd(8): bz#1297: tell the client (via a debug message) when their preferred listen address has been overridden by the server's GatewayPorts setting. * sshd(8): bz#2162: include report port in bad protocol banner message. * sftp(1): bz#2163: fix memory leak in error path in do_readdir(). * sftp(1): bz#2171: don't leak file descriptor on error. * sshd(8): Include the local address and port in "Connection from ..." message (only shown at loglevel>=verbose). Portable OpenSSH: * Please note that this is the last version of Portable OpenSSH that will support versions of OpenSSL prior to 0.9.6. Support (i.e. SSH_OLD_EVP) will be removed following the 6.5p1 release. * Portable OpenSSH will attempt compile and link as a Position Independent Executable on Linux, OS X and OpenBSD on recent gcc- like compilers. Other platforms and older/other compilers may request this using the --with-pie configure flag. * A number of other toolchain-related hardening options are used automatically if available, including -ftrapv to abort on signed integer overflow and options to write-protect dynamic linking information. The use of these options may be disabled using the --without-hardening configure flag. * If the toolchain supports it, one of the -fstack-protector-strong, -fstack-protector-all or -fstack-protector compilation flag are used to add guards to mitigate attacks based on stack overflows. The use of these options may be disabled using the --without-stackprotect configure option. * sshd(8): Add support for pre-authentication sandboxing using the Capsicum API introduced in FreeBSD 10. * Switch to a ChaCha20-based arc4random() PRNG for platforms that do not provide their own. * sshd(8): bz#2156: restore Linux oom_adj setting when handling SIGHUP to maintain behaviour over retart. * sshd(8): bz#2032: use local username in krb5_kuserok check rather than full client name which may be of form user@REALM. * ssh(1), sshd(8): Test for both the presence of ECC NID numbers in OpenSSL and that they actually work. Fedora (at least) has NID_secp521r1 that doesn't work. * bz#2173: use pkg-config --libs to include correct -L location for libedit.
2014-10-19 20:28:33 +04:00
#include <stdarg.h>
#include <stdlib.h>
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
#include "xmalloc.h"
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
#include "sshkey.h"
#include "ssherr.h"
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
#include "dns.h"
#include "log.h"
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
#include "digest.h"
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
static const char *errset_text[] = {
"success", /* 0 ERRSET_SUCCESS */
"out of memory", /* 1 ERRSET_NOMEMORY */
"general failure", /* 2 ERRSET_FAIL */
"invalid parameter", /* 3 ERRSET_INVAL */
"name does not exist", /* 4 ERRSET_NONAME */
"data does not exist", /* 5 ERRSET_NODATA */
};
static const char *
dns_result_totext(unsigned int res)
{
switch (res) {
case ERRSET_SUCCESS:
return errset_text[ERRSET_SUCCESS];
case ERRSET_NOMEMORY:
return errset_text[ERRSET_NOMEMORY];
case ERRSET_FAIL:
return errset_text[ERRSET_FAIL];
case ERRSET_INVAL:
return errset_text[ERRSET_INVAL];
case ERRSET_NONAME:
return errset_text[ERRSET_NONAME];
case ERRSET_NODATA:
return errset_text[ERRSET_NODATA];
default:
return "unknown error";
}
}
/*
* Read SSHFP parameters from key buffer.
*/
static int
dns_read_key(u_int8_t *algorithm, u_int8_t *digest_type,
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
u_char **digest, size_t *digest_len, struct sshkey *key)
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
{
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
int r, success = 0;
int fp_alg = -1;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
switch (key->type) {
case KEY_RSA:
*algorithm = SSHFP_KEY_RSA;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
if (!*digest_type)
*digest_type = SSHFP_HASH_SHA1;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
break;
case KEY_DSA:
*algorithm = SSHFP_KEY_DSA;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
if (!*digest_type)
*digest_type = SSHFP_HASH_SHA1;
break;
case KEY_ECDSA:
*algorithm = SSHFP_KEY_ECDSA;
if (!*digest_type)
*digest_type = SSHFP_HASH_SHA256;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
break;
Changes since OpenSSH 6.6 ========================= Potentially-incompatible changes * sshd(8): The default set of ciphers and MACs has been altered to remove unsafe algorithms. In particular, CBC ciphers and arcfour* are disabled by default. The full set of algorithms remains available if configured explicitly via the Ciphers and MACs sshd_config options. * sshd(8): Support for tcpwrappers/libwrap has been removed. * OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of connections using the curve25519-sha256@libssh.org KEX exchange method to fail when connecting with something that implements the specification correctly. OpenSSH 6.7 disables this KEX method when speaking to one of the affected versions. New Features * Major internal refactoring to begin to make part of OpenSSH usable as a library. So far the wire parsing, key handling and KRL code has been refactored. Please note that we do not consider the API stable yet, nor do we offer the library in separable form. * ssh(1), sshd(8): Add support for Unix domain socket forwarding. A remote TCP port may be forwarded to a local Unix domain socket and vice versa or both ends may be a Unix domain socket. * ssh(1), ssh-keygen(1): Add support for SSHFP DNS records for ED25519 key types. * sftp(1): Allow resumption of interrupted uploads. * ssh(1): When rekeying, skip file/DNS lookups of the hostkey if it is the same as the one sent during initial key exchange; bz#2154 * sshd(8): Allow explicit ::1 and 127.0.0.1 forwarding bind addresses when GatewayPorts=no; allows client to choose address family; bz#2222 * sshd(8): Add a sshd_config PermitUserRC option to control whether ~/.ssh/rc is executed, mirroring the no-user-rc authorized_keys option; bz#2160 * ssh(1): Add a %C escape sequence for LocalCommand and ControlPath that expands to a unique identifer based on a hash of the tuple of (local host, remote user, hostname, port). Helps avoid exceeding miserly pathname limits for Unix domain sockets in multiplexing control paths; bz#2220 * sshd(8): Make the "Too many authentication failures" message include the user, source address, port and protocol in a format similar to the authentication success / failure messages; bz#2199 * Added unit and fuzz tests for refactored code. These are run automatically in portable OpenSSH via the "make tests" target. Bugfixes * sshd(8): Fix remote forwarding with the same listen port but different listen address. * ssh(1): Fix inverted test that caused PKCS#11 keys that were explicitly listed in ssh_config or on the commandline not to be preferred. * ssh-keygen(1): Fix bug in KRL generation: multiple consecutive revoked certificate serial number ranges could be serialised to an invalid format. Readers of a broken KRL caused by this bug will fail closed, so no should-have-been-revoked key will be accepted. * ssh(1): Reflect stdio-forward ("ssh -W host:port ...") failures in exit status. Previously we were always returning 0; bz#2255 * ssh(1), ssh-keygen(1): Make Ed25519 keys' title fit properly in the randomart border; bz#2247 * ssh-agent(1): Only cleanup agent socket in the main agent process and not in any subprocesses it may have started (e.g. forked askpass). Fixes agent sockets being zapped when askpass processes fatal(); bz#2236 * ssh-add(1): Make stdout line-buffered; saves partial output getting lost when ssh-add fatal()s part-way through (e.g. when listing keys from an agent that supports key types that ssh-add doesn't); bz#2234 * ssh-keygen(1): When hashing or removing hosts, don't choke on @revoked markers and don't remove @cert-authority markers; bz#2241 * ssh(1): Don't fatal when hostname canonicalisation fails and a ProxyCommand is in use; continue and allow the ProxyCommand to connect anyway (e.g. to a host with a name outside the DNS behind a bastion) * scp(1): When copying local->remote fails during read, don't send uninitialised heap to the remote end. * sftp(1): Fix fatal "el_insertstr failed" errors when tab-completing filenames with a single quote char somewhere in the string; bz#2238 * ssh-keyscan(1): Scan for Ed25519 keys by default. * ssh(1): When using VerifyHostKeyDNS with a DNSSEC resolver, down- convert any certificate keys to plain keys and attempt SSHFP resolution. Prevents a server from skipping SSHFP lookup and forcing a new-hostkey dialog by offering only certificate keys. * sshd(8): Avoid crash at exit via NULL pointer reference; bz#2225 * Fix some strict-alignment errors. Portable OpenSSH * Portable OpenSSH now supports building against libressl-portable. * Portable OpenSSH now requires openssl 0.9.8f or greater. Older versions are no longer supported. * In the OpenSSL version check, allow fix version upgrades (but not downgrades. Debian bug #748150. * sshd(8): On Cygwin, determine privilege separation user at runtime, since it may need to be a domain account. * sshd(8): Don't attempt to use vhangup on Linux. It doesn't work for non-root users, and for them it just messes up the tty settings. * Use CLOCK_BOOTTIME in preference to CLOCK_MONOTONIC when it is available. It considers time spent suspended, thereby ensuring timeouts (e.g. for expiring agent keys) fire correctly. bz#2228 * Add support for ed25519 to opensshd.init init script. * sftp-server(8): On platforms that support it, use prctl() to prevent sftp-server from accessing /proc/self/{mem,maps} Changes since OpenSSH 6.5 ========================= This is primarily a bugfix release. Security: * sshd(8): when using environment passing with a sshd_config(5) AcceptEnv pattern with a wildcard. OpenSSH prior to 6.6 could be tricked into accepting any enviornment variable that contains the characters before the wildcard character. New / changed features: * ssh(1), sshd(8): this release removes the J-PAKE authentication code. This code was experimental, never enabled and had been unmaintained for some time. * ssh(1): when processing Match blocks, skip 'exec' clauses other clauses predicates failed to match. * ssh(1): if hostname canonicalisation is enabled and results in the destination hostname being changed, then re-parse ssh_config(5) files using the new destination hostname. This gives 'Host' and 'Match' directives that use the expanded hostname a chance to be applied. Bugfixes: * ssh(1): avoid spurious "getsockname failed: Bad file descriptor" in ssh -W. bz#2200, debian#738692 * sshd(8): allow the shutdown(2) syscall in seccomp-bpf and systrace sandbox modes, as it is reachable if the connection is terminated during the pre-auth phase. * ssh(1), sshd(8): fix unsigned overflow that in SSH protocol 1 bignum parsing. Minimum key length checks render this bug unexploitable to compromise SSH 1 sessions. * sshd_config(5): clarify behaviour of a keyword that appears in multiple matching Match blocks. bz#2184 * ssh(1): avoid unnecessary hostname lookups when canonicalisation is disabled. bz#2205 * sshd(8): avoid sandbox violation crashes in GSSAPI code by caching the supported list of GSSAPI mechanism OIDs before entering the sandbox. bz#2107 * ssh(1): fix possible crashes in SOCKS4 parsing caused by assumption that the SOCKS username is nul-terminated. * ssh(1): fix regression for UsePrivilegedPort=yes when BindAddress is not specified. * ssh(1), sshd(8): fix memory leak in ECDSA signature verification. * ssh(1): fix matching of 'Host' directives in ssh_config(5) files to be case-insensitive again (regression in 6.5). Portable OpenSSH: * sshd(8): don't fatal if the FreeBSD Capsicum is offered by the system headers and libc but is not supported by the kernel. * Fix build using the HP-UX compiler. Changes since OpenSSH 6.4 ========================= This is a feature-focused release. New features: * ssh(1), sshd(8): Add support for key exchange using elliptic-curve Diffie Hellman in Daniel Bernstein's Curve25519. This key exchange method is the default when both the client and server support it. * ssh(1), sshd(8): Add support for Ed25519 as a public key type. Ed25519 is a elliptic curve signature scheme that offers better security than ECDSA and DSA and good performance. It may be used for both user and host keys. * Add a new private key format that uses a bcrypt KDF to better protect keys at rest. This format is used unconditionally for Ed25519 keys, but may be requested when generating or saving existing keys of other types via the -o ssh-keygen(1) option. We intend to make the new format the default in the near future. Details of the new format are in the PROTOCOL.key file. * ssh(1), sshd(8): Add a new transport cipher "chacha20-poly1305@openssh.com" that combines Daniel Bernstein's ChaCha20 stream cipher and Poly1305 MAC to build an authenticated encryption mode. Details are in the PROTOCOL.chacha20poly1305 file. * ssh(1), sshd(8): Refuse RSA keys from old proprietary clients and servers that use the obsolete RSA+MD5 signature scheme. It will still be possible to connect with these clients/servers but only DSA keys will be accepted, and OpenSSH will refuse connection entirely in a future release. * ssh(1), sshd(8): Refuse old proprietary clients and servers that use a weaker key exchange hash calculation. * ssh(1): Increase the size of the Diffie-Hellman groups requested for each symmetric key size. New values from NIST Special Publication 800-57 with the upper limit specified by RFC4419. * ssh(1), ssh-agent(1): Support PKCS#11 tokens that only provide X.509 certs instead of raw public keys (requested as bz#1908). * ssh(1): Add a ssh_config(5) "Match" keyword that allows conditional configuration to be applied by matching on hostname, user and result of arbitrary commands. * ssh(1): Add support for client-side hostname canonicalisation using a set of DNS suffixes and rules in ssh_config(5). This allows unqualified names to be canonicalised to fully-qualified domain names to eliminate ambiguity when looking up keys in known_hosts or checking host certificate names. * sftp-server(8): Add the ability to whitelist and/or blacklist sftp protocol requests by name. * sftp-server(8): Add a sftp "fsync@openssh.com" to support calling fsync(2) on an open file handle. * sshd(8): Add a ssh_config(5) PermitTTY to disallow TTY allocation, mirroring the longstanding no-pty authorized_keys option. * ssh(1): Add a ssh_config ProxyUseFDPass option that supports the use of ProxyCommands that establish a connection and then pass a connected file descriptor back to ssh(1). This allows the ProxyCommand to exit rather than staying around to transfer data. Bugfixes: * ssh(1), sshd(8): Fix potential stack exhaustion caused by nested certificates. * ssh(1): bz#1211: make BindAddress work with UsePrivilegedPort. * sftp(1): bz#2137: fix the progress meter for resumed transfer. * ssh-add(1): bz#2187: do not request smartcard PIN when removing keys from ssh-agent. * sshd(8): bz#2139: fix re-exec fallback when original sshd binary cannot be executed. * ssh-keygen(1): Make relative-specified certificate expiry times relative to current time and not the validity start time. * sshd(8): bz#2161: fix AuthorizedKeysCommand inside a Match block. * sftp(1): bz#2129: symlinking a file would incorrectly canonicalise the target path. * ssh-agent(1): bz#2175: fix a use-after-free in the PKCS#11 agent helper executable. * sshd(8): Improve logging of sessions to include the user name, remote host and port, the session type (shell, command, etc.) and allocated TTY (if any). * sshd(8): bz#1297: tell the client (via a debug message) when their preferred listen address has been overridden by the server's GatewayPorts setting. * sshd(8): bz#2162: include report port in bad protocol banner message. * sftp(1): bz#2163: fix memory leak in error path in do_readdir(). * sftp(1): bz#2171: don't leak file descriptor on error. * sshd(8): Include the local address and port in "Connection from ..." message (only shown at loglevel>=verbose). Portable OpenSSH: * Please note that this is the last version of Portable OpenSSH that will support versions of OpenSSL prior to 0.9.6. Support (i.e. SSH_OLD_EVP) will be removed following the 6.5p1 release. * Portable OpenSSH will attempt compile and link as a Position Independent Executable on Linux, OS X and OpenBSD on recent gcc- like compilers. Other platforms and older/other compilers may request this using the --with-pie configure flag. * A number of other toolchain-related hardening options are used automatically if available, including -ftrapv to abort on signed integer overflow and options to write-protect dynamic linking information. The use of these options may be disabled using the --without-hardening configure flag. * If the toolchain supports it, one of the -fstack-protector-strong, -fstack-protector-all or -fstack-protector compilation flag are used to add guards to mitigate attacks based on stack overflows. The use of these options may be disabled using the --without-stackprotect configure option. * sshd(8): Add support for pre-authentication sandboxing using the Capsicum API introduced in FreeBSD 10. * Switch to a ChaCha20-based arc4random() PRNG for platforms that do not provide their own. * sshd(8): bz#2156: restore Linux oom_adj setting when handling SIGHUP to maintain behaviour over retart. * sshd(8): bz#2032: use local username in krb5_kuserok check rather than full client name which may be of form user@REALM. * ssh(1), sshd(8): Test for both the presence of ECC NID numbers in OpenSSL and that they actually work. Fedora (at least) has NID_secp521r1 that doesn't work. * bz#2173: use pkg-config --libs to include correct -L location for libedit.
2014-10-19 20:28:33 +04:00
case KEY_ED25519:
*algorithm = SSHFP_KEY_ED25519;
if (!*digest_type)
*digest_type = SSHFP_HASH_SHA256;
break;
OpenSSH 7.7 was released on 2018-04-02. It is available from the mirrors listed at http://www.openssh.com/ shortly. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: http://www.openssh.com/donations.html Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh(1)/sshd(8): Drop compatibility support for some very old SSH implementations, including ssh.com <=2.* and OpenSSH <= 3.*. These versions were all released in or before 2001 and predate the final SSH RFCs. The support in question isn't necessary for RFC-compliant SSH implementations. Changes since OpenSSH 7.6 ========================= This is primarily a bugfix release. New Features ------------ * All: Add experimental support for PQC XMSS keys (Extended Hash- Based Signatures) based on the algorithm described in https://tools.ietf.org/html/draft-irtf-cfrg-xmss-hash-based-signatures-12 The XMSS signature code is experimental and not compiled in by default. * sshd(8): Add a "rdomain" criteria for the sshd_config Match keyword to allow conditional configuration that depends on which routing domain a connection was received on (currently supported on OpenBSD and Linux). * sshd_config(5): Add an optional rdomain qualifier to the ListenAddress directive to allow listening on different routing domains. This is supported only on OpenBSD and Linux at present. * sshd_config(5): Add RDomain directive to allow the authenticated session to be placed in an explicit routing domain. This is only supported on OpenBSD at present. * sshd(8): Add "expiry-time" option for authorized_keys files to allow for expiring keys. * ssh(1): Add a BindInterface option to allow binding the outgoing connection to an interface's address (basically a more usable BindAddress) * ssh(1): Expose device allocated for tun/tap forwarding via a new %T expansion for LocalCommand. This allows LocalCommand to be used to prepare the interface. * sshd(8): Expose the device allocated for tun/tap forwarding via a new SSH_TUNNEL environment variable. This allows automatic setup of the interface and surrounding network configuration automatically on the server. * ssh(1)/scp(1)/sftp(1): Add URI support to ssh, sftp and scp, e.g. ssh://user@host or sftp://user@host/path. Additional connection parameters described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since the ssh fingerprint format in the draft uses the deprecated MD5 hash with no way to specify the any other algorithm. * ssh-keygen(1): Allow certificate validity intervals that specify only a start or stop time (instead of both or neither). * sftp(1): Allow "cd" and "lcd" commands with no explicit path argument. lcd will change to the local user's home directory as usual. cd will change to the starting directory for session (because the protocol offers no way to obtain the remote user's home directory). bz#2760 * sshd(8): When doing a config test with sshd -T, only require the attributes that are actually used in Match criteria rather than (an incomplete list of) all criteria. Bugfixes -------- * ssh(1)/sshd(8): More strictly check signature types during key exchange against what was negotiated. Prevents downgrade of RSA signatures made with SHA-256/512 to SHA-1. * sshd(8): Fix support for client that advertise a protocol version of "1.99" (indicating that they are prepared to accept both SSHv1 and SSHv2). This was broken in OpenSSH 7.6 during the removal of SSHv1 support. bz#2810 * ssh(1): Warn when the agent returns a ssh-rsa (SHA1) signature when a rsa-sha2-256/512 signature was requested. This condition is possible when an old or non-OpenSSH agent is in use. bz#2799 * ssh-agent(1): Fix regression introduced in 7.6 that caused ssh-agent to fatally exit if presented an invalid signature request message. * sshd_config(5): Accept yes/no flag options case-insensitively, as has been the case in ssh_config(5) for a long time. bz#2664 * ssh(1): Improve error reporting for failures during connection. Under some circumstances misleading errors were being shown. bz#2814 * ssh-keyscan(1): Add -D option to allow printing of results directly in SSHFP format. bz#2821 * regress tests: fix PuTTY interop test broken in last release's SSHv1 removal. bz#2823 * ssh(1): Compatibility fix for some servers that erroneously drop the connection when the IUTF8 (RFC8160) option is sent. * scp(1): Disable RemoteCommand and RequestTTY in the ssh session started by scp (sftp was already doing this.) * ssh-keygen(1): Refuse to create a certificate with an unusable number of principals. * ssh-keygen(1): Fatally exit if ssh-keygen is unable to write all the public key during key generation. Previously it would silently ignore errors writing the comment and terminating newline. * ssh(1): Do not modify hostname arguments that are addresses by automatically forcing them to lower-case. Instead canonicalise them to resolve ambiguities (e.g. ::0001 => ::1) before they are matched against known_hosts. bz#2763 * ssh(1): Don't accept junk after "yes" or "no" responses to hostkey prompts. bz#2803 * sftp(1): Have sftp print a warning about shell cleanliness when decoding the first packet fails, which is usually caused by shells polluting stdout of non-interactive startups. bz#2800 * ssh(1)/sshd(8): Switch timers in packet code from using wall-clock time to monotonic time, allowing the packet layer to better function over a clock step and avoiding possible integer overflows during steps. * Numerous manual page fixes and improvements. Portability ----------- * sshd(8): Correctly detect MIPS ABI in use at configure time. Fixes sandbox violations on some environments. * sshd(8): Remove UNICOS support. The hardware and software are literal museum pieces and support in sshd is too intrusive to justify maintaining. * All: Build and link with "retpoline" flags when available to mitigate the "branch target injection" style (variant 2) of the Spectre branch-prediction vulnerability. * All: Add auto-generated dependency information to Makefile. * Numerous fixed to the RPM spec files. Checksums: ========== - SHA1 (openssh-7.7.tar.gz) = 24812e05fa233014c847c7775748316e7f8a836c - SHA256 (openssh-7.7.tar.gz) = T4ua1L/vgAYqwB0muRahvnm5ZUr3PLY9nPljaG8egvo= - SHA1 (openssh-7.7p1.tar.gz) = 446fe9ed171f289f0d62197dffdbfdaaf21c49f2 - SHA256 (openssh-7.7p1.tar.gz) = 1zvn5oTpnvzQJL4Vowv/y+QbASsvezyQhK7WIXdea48= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available as RELEASE_KEY.asc from the mirror sites. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com
2018-04-06 21:56:05 +03:00
case KEY_XMSS:
*algorithm = SSHFP_KEY_XMSS;
if (!*digest_type)
*digest_type = SSHFP_HASH_SHA256;
break;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
default:
*algorithm = SSHFP_KEY_RESERVED; /* 0 */
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
*digest_type = SSHFP_HASH_RESERVED; /* 0 */
}
switch (*digest_type) {
case SSHFP_HASH_SHA1:
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
fp_alg = SSH_DIGEST_SHA1;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
break;
case SSHFP_HASH_SHA256:
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
fp_alg = SSH_DIGEST_SHA256;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
break;
default:
*digest_type = SSHFP_HASH_RESERVED; /* 0 */
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
}
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
if (*algorithm && *digest_type) {
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
if ((r = sshkey_fingerprint_raw(key, fp_alg, digest,
digest_len)) != 0)
OpenSSH 8.5/8.5p1 (2021-03-03) OpenSSH 8.5 was released on 2021-03-03. It is available from the mirrors listed at https://www.openssh.com/. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: https://www.openssh.com/donations.html Future deprecation notice ========================= It is now possible[1] to perform chosen-prefix attacks against the SHA-1 algorithm for less than USD$50K. In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1 hash algorithm in conjunction with the RSA public key algorithm. OpenSSH will disable this signature scheme by default in the near future. Note that the deactivation of "ssh-rsa" signatures does not necessarily require cessation of use for RSA keys. In the SSH protocol, keys may be capable of signing using multiple algorithms. In particular, "ssh-rsa" keys are capable of signing using "rsa-sha2-256" (RSA/SHA256), "rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of these is being turned off by default. This algorithm is unfortunately still used widely despite the existence of better alternatives, being the only remaining public key signature algorithm specified by the original SSH RFCs that is still enabled by default. The better alternatives include: * The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These algorithms have the advantage of using the same key type as "ssh-rsa" but use the safe SHA-2 hash algorithms. These have been supported since OpenSSH 7.2 and are already used by default if the client and server support them. * The RFC8709 ssh-ed25519 signature algorithm. It has been supported in OpenSSH since release 6.5. * The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These have been supported by OpenSSH since release 5.7. To check whether a server is using the weak ssh-rsa public key algorithm, for host authentication, try to connect to it after removing the ssh-rsa algorithm from ssh(1)'s allowed list: ssh -oHostKeyAlgorithms=-ssh-rsa user@host If the host key verification fails and no other supported host key types are available, the server software on that host should be upgraded. This release enables the UpdateHostKeys option by default to assist the client by automatically migrating to better algorithms. [1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and Application to the PGP Web of Trust" Leurent, G and Peyrin, T (2020) https://eprint.iacr.org/2020/014.pdf Security ======== * ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket. On modern operating systems where the OS can provide information about the user identity connected to a socket, OpenSSH ssh-agent and sshd limit agent socket access only to the originating user and root. Additional mitigation may be afforded by the system's malloc(3)/free(3) implementation, if it detects double-free conditions. The most likely scenario for exploitation is a user forwarding an agent either to an account shared with a malicious user or to a host with an attacker holding root access. * Portable sshd(8): Prevent excessively long username going to PAM. This is a mitigation for a buffer overflow in Solaris' PAM username handling (CVE-2020-14871), and is only enabled for Sun-derived PAM implementations. This is not a problem in sshd itself, it only prevents sshd from being used as a vector to attack Solaris' PAM. It does not prevent the bug in PAM from being exploited via some other PAM application. GHPR212 Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519. * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes. * ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001. * ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. Per its designers, the sntrup4591761 algorithm was superseded almost two years ago by sntrup761. (note this both the updated method and the one that it replaced are disabled by default) * ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers. Changes since OpenSSH 8.4 ========================= New features ------------ * ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions: - The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile). - The same key does not exist under another name. - A certificate host key is not in use. - known_hosts contains no matching wildcard hostname pattern. - VerifyHostKeyDNS is not enabled. - The default UserKnownHostsFile is in use. We expect some of these conditions will be modified or relaxed in future. * ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists. * ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key. * ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys. * ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files. * ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS. * ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials. * sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit. Bugfixes -------- * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224 * sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR201 * ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded. * ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229 * ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client. * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253 * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms. * sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet. * ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078). * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206 * Minor man page fixes (capitalization, commas, etc.) bz#3223 * sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222 * ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879 * ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320 * sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239 * sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248. * ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250 * ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type. Portability ----------- * sshd(8): add a number of platform-specific syscalls to the Linux seccomp-bpf sandbox. bz#3232 bz#3260 * sshd(8): remove debug message from sigchld handler that could cause deadlock on some platforms. bz#3259 * Sync contrib/ssh-copy-id with upstream. * unittests: add a hostname function for systems that don't have it. Some systems don't have a hostname command (it's not required by POSIX). The do have uname -n (which is), but not all of those have it report the FQDN. Checksums: ========== - SHA1 (openssh-8.5.tar.gz) = 04cae43c389fb411227c01219e4eb46e3113f34e - SHA256 (openssh-8.5.tar.gz) = 5qB2CgzNG4io4DmChTjHgCWqRWvEOvCKJskLdJCz+SU= - SHA1 (openssh-8.5p1.tar.gz) = 72eadcbe313b07b1dd3b693e41d3cd56d354e24e - SHA256 (openssh-8.5p1.tar.gz) = 9S8/QdQpqpkY44zyAK8iXM3Y5m8FLaVyhwyJc3ZG7CU= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available from the mirror sites: https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc Please note that the OpenPGP key used to sign releases has been rotated for this release. The new key has been signed by the previous key to provide continuity. Reporting Bugs: =============== - Please read https://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com
2021-03-05 20:45:24 +03:00
fatal_fr(r, "sshkey_fingerprint_raw");
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
success = 1;
} else {
*digest = NULL;
*digest_len = 0;
success = 0;
}
return success;
}
/*
* Read SSHFP parameters from rdata buffer.
*/
static int
dns_read_rdata(u_int8_t *algorithm, u_int8_t *digest_type,
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
u_char **digest, size_t *digest_len, u_char *rdata, int rdata_len)
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
{
int success = 0;
*algorithm = SSHFP_KEY_RESERVED;
*digest_type = SSHFP_HASH_RESERVED;
if (rdata_len >= 2) {
*algorithm = rdata[0];
*digest_type = rdata[1];
*digest_len = rdata_len - 2;
if (*digest_len > 0) {
Changes since OpenSSH 7.0 ========================= This is a bugfix release. Security -------- * sshd(8): OpenSSH 7.0 contained a logic error in PermitRootLogin= prohibit-password/without-password that could, depending on compile-time configuration, permit password authentication to root while preventing other forms of authentication. This problem was reported by Mantas Mikulenas. Bugfixes -------- * ssh(1), sshd(8): add compatability workarounds for FuTTY * ssh(1), sshd(8): refine compatability workarounds for WinSCP * Fix a number of memory faults (double-free, free of uninitialised memory, etc) in ssh(1) and ssh-keygen(1). Reported by Mateusz Kocielski.
2015-08-21 11:08:44 +03:00
*digest = xmalloc(*digest_len);
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
memcpy(*digest, rdata + 2, *digest_len);
} else {
*digest = (u_char *)xstrdup("");
}
success = 1;
}
return success;
}
/*
* Check if hostname is numerical.
* Returns -1 if hostname is numeric, 0 otherwise
*/
static int
is_numeric_hostname(const char *hostname)
{
struct addrinfo hints, *ai;
/*
* We shouldn't ever get a null host but if we do then log an error
* and return -1 which stops DNS key fingerprint processing.
*/
if (hostname == NULL) {
error("is_numeric_hostname called with NULL hostname");
return -1;
}
memset(&hints, 0, sizeof(hints));
hints.ai_socktype = SOCK_DGRAM;
hints.ai_flags = AI_NUMERICHOST;
if (getaddrinfo(hostname, NULL, &hints, &ai) == 0) {
freeaddrinfo(ai);
return -1;
}
return 0;
}
/*
* Verify the given hostname, address and host key using DNS.
* Returns 0 if lookup succeeds, -1 otherwise
*/
int
verify_host_key_dns(const char *hostname, struct sockaddr *address,
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
struct sshkey *hostkey, int *flags)
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
{
u_int counter;
int result;
struct rrsetinfo *fingerprints = NULL;
u_int8_t hostkey_algorithm;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
u_int8_t hostkey_digest_type = SSHFP_HASH_RESERVED;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
u_char *hostkey_digest;
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
size_t hostkey_digest_len;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
u_int8_t dnskey_algorithm;
u_int8_t dnskey_digest_type;
u_char *dnskey_digest;
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
size_t dnskey_digest_len;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
*flags = 0;
debug3("verify_host_key_dns");
if (hostkey == NULL)
fatal("No key to look up!");
if (is_numeric_hostname(hostname)) {
debug("skipped DNS lookup for numerical hostname");
return -1;
}
result = getrrsetbyname(hostname, DNS_RDATACLASS_IN,
DNS_RDATATYPE_SSHFP, 0, &fingerprints);
if (result) {
verbose("DNS lookup error: %s", dns_result_totext(result));
return -1;
}
if (fingerprints->rri_flags & RRSET_VALIDATED) {
*flags |= DNS_VERIFY_SECURE;
debug("found %d secure fingerprints in DNS",
fingerprints->rri_nrdatas);
} else {
debug("found %d insecure fingerprints in DNS",
fingerprints->rri_nrdatas);
}
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
/* Initialize default host key parameters */
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
if (!dns_read_key(&hostkey_algorithm, &hostkey_digest_type,
&hostkey_digest, &hostkey_digest_len, hostkey)) {
error("Error calculating host key fingerprint.");
freerrset(fingerprints);
return -1;
}
if (fingerprints->rri_nrdatas)
*flags |= DNS_VERIFY_FOUND;
for (counter = 0; counter < fingerprints->rri_nrdatas; counter++) {
/*
* Extract the key from the answer. Ignore any badly
* formatted fingerprints.
*/
if (!dns_read_rdata(&dnskey_algorithm, &dnskey_digest_type,
&dnskey_digest, &dnskey_digest_len,
fingerprints->rri_rdatas[counter].rdi_data,
fingerprints->rri_rdatas[counter].rdi_length)) {
verbose("Error parsing fingerprint from DNS.");
continue;
}
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
if (hostkey_digest_type != dnskey_digest_type) {
hostkey_digest_type = dnskey_digest_type;
Import new openssh to address Changes since OpenSSH 6.3 ========================= This release fixes a security bug: * sshd(8): fix a memory corruption problem triggered during rekeying when an AES-GCM cipher is selected. Full details of the vulnerability are available at: http://www.openssh.com/txt/gcmrekey.adv Checksums: ========== - SHA1 (openssh-6.4.tar.gz) = 4caf1a50eb3a3da821c16298c4aaa576fe24210c - SHA1 (openssh-6.4p1.tar.gz) = cf5fe0eb118d7e4f9296fbc5d6884965885fc55d Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2013-11-08 21:58:08 +04:00
free(hostkey_digest);
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
/* Initialize host key parameters */
if (!dns_read_key(&hostkey_algorithm,
&hostkey_digest_type, &hostkey_digest,
&hostkey_digest_len, hostkey)) {
error("Error calculating key fingerprint.");
freerrset(fingerprints);
return -1;
}
}
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
/* Check if the current key is the same as the given key */
if (hostkey_algorithm == dnskey_algorithm &&
hostkey_digest_type == dnskey_digest_type) {
if (hostkey_digest_len == dnskey_digest_len &&
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
timingsafe_bcmp(hostkey_digest, dnskey_digest,
hostkey_digest_len) == 0)
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
*flags |= DNS_VERIFY_MATCH;
}
Import new openssh to address Changes since OpenSSH 6.3 ========================= This release fixes a security bug: * sshd(8): fix a memory corruption problem triggered during rekeying when an AES-GCM cipher is selected. Full details of the vulnerability are available at: http://www.openssh.com/txt/gcmrekey.adv Checksums: ========== - SHA1 (openssh-6.4.tar.gz) = 4caf1a50eb3a3da821c16298c4aaa576fe24210c - SHA1 (openssh-6.4p1.tar.gz) = cf5fe0eb118d7e4f9296fbc5d6884965885fc55d Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2013-11-08 21:58:08 +04:00
free(dnskey_digest);
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
}
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
free(hostkey_digest); /* from sshkey_fingerprint_raw() */
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
freerrset(fingerprints);
if (*flags & DNS_VERIFY_FOUND)
if (*flags & DNS_VERIFY_MATCH)
debug("matching host key fingerprint found in DNS");
else
debug("mismatching host key fingerprint found in DNS");
else
debug("no host key fingerprint found in DNS");
return 0;
}
/*
* Export the fingerprint of a key as a DNS resource record
*/
int
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
export_dns_rr(const char *hostname, struct sshkey *key, FILE *f, int generic)
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
{
u_int8_t rdata_pubkey_algorithm = 0;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
u_int8_t rdata_digest_type = SSHFP_HASH_RESERVED;
u_int8_t dtype;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
u_char *rdata_digest;
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
size_t i, rdata_digest_len;
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
int success = 0;
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
for (dtype = SSHFP_HASH_SHA1; dtype < SSHFP_HASH_MAX; dtype++) {
rdata_digest_type = dtype;
if (dns_read_key(&rdata_pubkey_algorithm, &rdata_digest_type,
&rdata_digest, &rdata_digest_len, key)) {
if (generic) {
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
fprintf(f, "%s IN TYPE%d \\# %zu %02x %02x ",
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
hostname, DNS_RDATATYPE_SSHFP,
2 + rdata_digest_len,
rdata_pubkey_algorithm, rdata_digest_type);
} else {
fprintf(f, "%s IN SSHFP %d %d ", hostname,
rdata_pubkey_algorithm, rdata_digest_type);
}
for (i = 0; i < rdata_digest_len; i++)
fprintf(f, "%02x", rdata_digest[i]);
fprintf(f, "\n");
Changes since OpenSSH 6.7 ========================= This is a major release, containing a number of new features as well as a large internal re-factoring. Potentially-incompatible changes -------------------------------- * sshd(8): UseDNS now defaults to 'no'. Configurations that match against the client host name (via sshd_config or authorized_keys) may need to re-enable it or convert to matching against addresses. New Features ------------ * Much of OpenSSH's internal code has been re-factored to be more library-like. These changes are mostly not user-visible, but have greatly improved OpenSSH's testability and internal layout. * Add FingerprintHash option to ssh(1) and sshd(8), and equivalent command-line flags to the other tools to control algorithm used for key fingerprints. The default changes from MD5 to SHA256 and format from hex to base64. Fingerprints now have the hash algorithm prepended. An example of the new format: SHA256:mVPwvezndPv/ARoIadVY98vAC0g+P/5633yTC4d/wXE Please note that visual host keys will also be different. * ssh(1), sshd(8): Experimental host key rotation support. Add a protocol extension for a server to inform a client of all its available host keys after authentication has completed. The client may record the keys in known_hosts, allowing it to upgrade to better host key algorithms and a server to gracefully rotate its keys. The client side of this is controlled by a UpdateHostkeys config option (default off). * ssh(1): Add a ssh_config HostbasedKeyType option to control which host public key types are tried during host-based authentication. * ssh(1), sshd(8): fix connection-killing host key mismatch errors when sshd offers multiple ECDSA keys of different lengths. * ssh(1): when host name canonicalisation is enabled, try to parse host names as addresses before looking them up for canonicalisation. fixes bz#2074 and avoiding needless DNS lookups in some cases. * ssh-keygen(1), sshd(8): Key Revocation Lists (KRLs) no longer require OpenSSH to be compiled with OpenSSL support. * ssh(1), ssh-keysign(8): Make ed25519 keys work for host based authentication. * sshd(8): SSH protocol v.1 workaround for the Meyer, et al, Bleichenbacher Side Channel Attack. Fake up a bignum key before RSA decryption. * sshd(8): Remember which public keys have been used for authentication and refuse to accept previously-used keys. This allows AuthenticationMethods=publickey,publickey to require that users authenticate using two _different_ public keys. * sshd(8): add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. * sshd(8): Don't count partial authentication success as a failure against MaxAuthTries. * ssh(1): Add RevokedHostKeys option for the client to allow text-file or KRL-based revocation of host keys. * ssh-keygen(1), sshd(8): Permit KRLs that revoke certificates by serial number or key ID without scoping to a particular CA. * ssh(1): Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. * ssh(1): Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T". * ssh(1): Allow Match criteria to be negated. E.g. "Match !host". * The regression test suite has been extended to cover more OpenSSH features. The unit tests have been expanded and now cover key exchange. Bugfixes * ssh-keyscan(1): ssh-keyscan has been made much more robust again servers that hang or violate the SSH protocol. * ssh(1), ssh-keygen(1): Fix regression bz#2306: Key path names were being lost as comment fields. * ssh(1): Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2286 * ssh(1): Tweak config re-parsing with host canonicalisation - make the second pass through the config files always run when host name canonicalisation is enabled (and not whenever the host name changes) bz#2267 * ssh(1): Fix passing of wildcard forward bind addresses when connection multiplexing is in use; bz#2324; * ssh-keygen(1): Fix broken private key conversion from non-OpenSSH formats; bz#2345. * ssh-keygen(1): Fix KRL generation bug when multiple CAs are in use. * Various fixes to manual pages: bz#2288, bz#2316, bz#2273 Portable OpenSSH * Support --without-openssl at configure time Disables and removes dependency on OpenSSL. Many features, including SSH protocol 1 are not supported and the set of crypto options is greatly restricted. This will only work on systems with native arc4random or /dev/urandom. Considered highly experimental for now. * Support --without-ssh1 option at configure time Allows disabling support for SSH protocol 1. * sshd(8): Fix compilation on systems with IPv6 support in utmpx; bz#2296 * Allow custom service name for sshd on Cygwin. Permits the use of multiple sshd running with different service names. Checksums: ========== - SHA1 (openssh-6.8.tar.gz) = 99903c6ca76e0a2c044711017f81127e12459d37 - SHA256 (openssh-6.8.tar.gz) = N1uzVarFbrm2CzAwuDu3sRoszmqpK+5phAChP/QNyuw= - SHA1 (openssh-6.8p1.tar.gz) = cdbc51e46a902b30d263b05fdc71340920e91c92 - SHA256 (openssh-6.8p1.tar.gz) = P/ZM5z7hJEgLW/dnuYMNfTwDu8tqvnFrePAZLDfOFg4= Please note that the PGP key used to sign releases was recently rotated. The new key has been signed by the old key to provide continuity. It is available from the mirror sites as RELEASE_KEY.asc. Reporting Bugs: =============== - Please read http://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and Ben Lindstrom.
2015-04-04 02:49:21 +03:00
free(rdata_digest); /* from sshkey_fingerprint_raw() */
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
success = 1;
}
}
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
From ftp.openbsd.org
2012-12-12 20:52:18 +04:00
/* No SSHFP record was generated at all */
if (success == 0) {
OpenSSH 8.5/8.5p1 (2021-03-03) OpenSSH 8.5 was released on 2021-03-03. It is available from the mirrors listed at https://www.openssh.com/. OpenSSH is a 100% complete SSH protocol 2.0 implementation and includes sftp client and server support. Once again, we would like to thank the OpenSSH community for their continued support of the project, especially those who contributed code or patches, reported bugs, tested snapshots or donated to the project. More information on donations may be found at: https://www.openssh.com/donations.html Future deprecation notice ========================= It is now possible[1] to perform chosen-prefix attacks against the SHA-1 algorithm for less than USD$50K. In the SSH protocol, the "ssh-rsa" signature scheme uses the SHA-1 hash algorithm in conjunction with the RSA public key algorithm. OpenSSH will disable this signature scheme by default in the near future. Note that the deactivation of "ssh-rsa" signatures does not necessarily require cessation of use for RSA keys. In the SSH protocol, keys may be capable of signing using multiple algorithms. In particular, "ssh-rsa" keys are capable of signing using "rsa-sha2-256" (RSA/SHA256), "rsa-sha2-512" (RSA/SHA512) and "ssh-rsa" (RSA/SHA1). Only the last of these is being turned off by default. This algorithm is unfortunately still used widely despite the existence of better alternatives, being the only remaining public key signature algorithm specified by the original SSH RFCs that is still enabled by default. The better alternatives include: * The RFC8332 RSA SHA-2 signature algorithms rsa-sha2-256/512. These algorithms have the advantage of using the same key type as "ssh-rsa" but use the safe SHA-2 hash algorithms. These have been supported since OpenSSH 7.2 and are already used by default if the client and server support them. * The RFC8709 ssh-ed25519 signature algorithm. It has been supported in OpenSSH since release 6.5. * The RFC5656 ECDSA algorithms: ecdsa-sha2-nistp256/384/521. These have been supported by OpenSSH since release 5.7. To check whether a server is using the weak ssh-rsa public key algorithm, for host authentication, try to connect to it after removing the ssh-rsa algorithm from ssh(1)'s allowed list: ssh -oHostKeyAlgorithms=-ssh-rsa user@host If the host key verification fails and no other supported host key types are available, the server software on that host should be upgraded. This release enables the UpdateHostKeys option by default to assist the client by automatically migrating to better algorithms. [1] "SHA-1 is a Shambles: First Chosen-Prefix Collision on SHA-1 and Application to the PGP Web of Trust" Leurent, G and Peyrin, T (2020) https://eprint.iacr.org/2020/014.pdf Security ======== * ssh-agent(1): fixed a double-free memory corruption that was introduced in OpenSSH 8.2 . We treat all such memory faults as potentially exploitable. This bug could be reached by an attacker with access to the agent socket. On modern operating systems where the OS can provide information about the user identity connected to a socket, OpenSSH ssh-agent and sshd limit agent socket access only to the originating user and root. Additional mitigation may be afforded by the system's malloc(3)/free(3) implementation, if it detects double-free conditions. The most likely scenario for exploitation is a user forwarding an agent either to an account shared with a malicious user or to a host with an attacker holding root access. * Portable sshd(8): Prevent excessively long username going to PAM. This is a mitigation for a buffer overflow in Solaris' PAM username handling (CVE-2020-14871), and is only enabled for Sun-derived PAM implementations. This is not a problem in sshd itself, it only prevents sshd from being used as a vector to attack Solaris' PAM. It does not prevent the bug in PAM from being exploited via some other PAM application. GHPR212 Potentially-incompatible changes ================================ This release includes a number of changes that may affect existing configurations: * ssh(1), sshd(8): this release changes the first-preference signature algorithm from ECDSA to ED25519. * ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for interactive use prior to TCP connect. The connection phase of the SSH session is time-sensitive and often explicitly interactive. The ultimate interactive/bulk TOS/DSCP will be set after authentication completes. * ssh(1), sshd(8): remove the pre-standardization cipher rijndael-cbc@lysator.liu.se. It is an alias for aes256-cbc before it was standardized in RFC4253 (2006), has been deprecated and disabled by default since OpenSSH 7.2 (2016) and was only briefly documented in ssh.1 in 2001. * ssh(1), sshd(8): update/replace the experimental post-quantum hybrid key exchange method based on Streamlined NTRU Prime coupled with X25519. The previous sntrup4591761x25519-sha512@tinyssh.org method is replaced with sntrup761x25519-sha512@openssh.com. Per its designers, the sntrup4591761 algorithm was superseded almost two years ago by sntrup761. (note this both the updated method and the one that it replaced are disabled by default) * ssh(1): disable CheckHostIP by default. It provides insignificant benefits while making key rotation significantly more difficult, especially for hosts behind IP-based load-balancers. Changes since OpenSSH 8.4 ========================= New features ------------ * ssh(1): this release enables UpdateHostkeys by default subject to some conservative preconditions: - The key was matched in the UserKnownHostsFile (and not in the GlobalKnownHostsFile). - The same key does not exist under another name. - A certificate host key is not in use. - known_hosts contains no matching wildcard hostname pattern. - VerifyHostKeyDNS is not enabled. - The default UserKnownHostsFile is in use. We expect some of these conditions will be modified or relaxed in future. * ssh(1), sshd(8): add a new LogVerbose configuration directive for that allows forcing maximum debug logging by file/function/line pattern-lists. * ssh(1): when prompting the user to accept a new hostkey, display any other host names/addresses already associated with the key. * ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts file should be used to identify host keys. * ssh(1): add a ssh_config KnownHostsCommand option that allows the client to obtain known_hosts data from a command in addition to the usual files. * ssh(1): add a ssh_config PermitRemoteOpen option that allows the client to restrict the destination when RemoteForward is used with SOCKS. * ssh(1): for FIDO keys, if a signature operation fails with a "incorrect PIN" reason and no PIN was initially requested from the user, then request a PIN and retry the operation. This supports some biometric devices that fall back to requiring PIN when reading of the biometric failed, and devices that require PINs for all hosted credentials. * sshd(8): implement client address-based rate-limiting via new sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize directives that provide more fine-grained control on a per-origin address basis than the global MaxStartups limit. Bugfixes -------- * ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make it easier to determine which connection they are associated with in cases like scp -3, ProxyJump, etc. bz#3224 * sshd(8): fix sshd_config SetEnv directives located inside Match blocks. GHPR201 * ssh(1): when requesting a FIDO token touch on stderr, inform the user once the touch has been recorded. * ssh(1): prevent integer overflow when ridiculously large ConnectTimeout values are specified, capping the effective value (for most platforms) at 24 days. bz#3229 * ssh(1): consider the ECDSA key subtype when ordering host key algorithms in the client. * ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that it control allowed key algorithms, when this option actually specifies the signature algorithms that are accepted. The previous name remains available as an alias. bz#3253 * ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms. * sftp-server(8): add missing lsetstat@openssh.com documentation and advertisement in the server's SSH2_FXP_VERSION hello packet. * ssh(1), sshd(8): more strictly enforce KEX state-machine by banning packet types once they are received. Fixes memleak caused by duplicate SSH2_MSG_KEX_DH_GEX_REQUEST (oss-fuzz #30078). * sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit platforms instead of being limited by LONG_MAX. bz#3206 * Minor man page fixes (capitalization, commas, etc.) bz#3223 * sftp(1): when doing an sftp recursive upload or download of a read-only directory, ensure that the directory is created with write and execute permissions in the interim so that the transfer can actually complete, then set the directory permission as the final step. bz#3222 * ssh-keygen(1): document the -Z, check the validity of its argument earlier and provide a better error message if it's not correct. bz#2879 * ssh(1): ignore comments at the end of config lines in ssh_config, similar to what we already do for sshd_config. bz#2320 * sshd_config(5): mention that DisableForwarding is valid in a sshd_config Match block. bz3239 * sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances. bz3248. * ssh(1), sshd(8): fix potential integer truncation of (unlikely) timeout values. bz#3250 * ssh(1): make hostbased authentication send the signature algorithm in its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This make HostbasedAcceptedAlgorithms do what it is supposed to - filter on signature algorithm and not key type. Portability ----------- * sshd(8): add a number of platform-specific syscalls to the Linux seccomp-bpf sandbox. bz#3232 bz#3260 * sshd(8): remove debug message from sigchld handler that could cause deadlock on some platforms. bz#3259 * Sync contrib/ssh-copy-id with upstream. * unittests: add a hostname function for systems that don't have it. Some systems don't have a hostname command (it's not required by POSIX). The do have uname -n (which is), but not all of those have it report the FQDN. Checksums: ========== - SHA1 (openssh-8.5.tar.gz) = 04cae43c389fb411227c01219e4eb46e3113f34e - SHA256 (openssh-8.5.tar.gz) = 5qB2CgzNG4io4DmChTjHgCWqRWvEOvCKJskLdJCz+SU= - SHA1 (openssh-8.5p1.tar.gz) = 72eadcbe313b07b1dd3b693e41d3cd56d354e24e - SHA256 (openssh-8.5p1.tar.gz) = 9S8/QdQpqpkY44zyAK8iXM3Y5m8FLaVyhwyJc3ZG7CU= Please note that the SHA256 signatures are base64 encoded and not hexadecimal (which is the default for most checksum tools). The PGP key used to sign the releases is available from the mirror sites: https://cdn.openbsd.org/pub/OpenBSD/OpenSSH/RELEASE_KEY.asc Please note that the OpenPGP key used to sign releases has been rotated for this release. The new key has been signed by the previous key to provide continuity. Reporting Bugs: =============== - Please read https://www.openssh.com/report.html Security bugs should be reported directly to openssh@openssh.com
2021-03-05 20:45:24 +03:00
error_f("unsupported algorithm and/or digest_type");
import 5.2 from ftp.openbsd.org
2009-06-08 02:19:00 +04:00
}
return success;
}