NetBSD/sys/arch/mac68k/dev/scsi96.c

440 lines
10 KiB
C
Raw Normal View History

/* $NetBSD: scsi96.c,v 1.13 1995/08/14 03:55:28 briggs Exp $ */
1994-10-26 11:45:48 +03:00
/*
* Copyright (C) 1994 Allen K. Briggs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* WARNING! This is a non-working driver at the moment!
* That means it does not work! Contact Allen Briggs
* (briggs@mail.vt.edu) for current status of this driver.
*/
#include <sys/types.h>
#include <sys/malloc.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/device.h>
1994-11-29 06:43:52 +03:00
#include <scsi/scsi_all.h>
#include <scsi/scsi_debug.h>
#include <scsi/scsiconf.h>
#include <machine/scsi96reg.h>
#include "../mac68k/via.h"
/* Support for the NCR 53C96 SCSI processor--primarily for '040 Macs. */
#ifdef DDB
1995-04-21 06:47:35 +04:00
int Debugger();
#else
#define Debugger() panic("Should call Debugger here (mac/dev/scsi96.c).")
#endif
1995-07-04 18:38:49 +04:00
extern vm_offset_t SCSIBase;
1995-04-21 06:47:35 +04:00
static volatile unsigned char *ncr53c96base =
(volatile unsigned char *) 0xF000; /* Offset from IOBase */
1995-07-04 18:38:49 +04:00
struct ncr53c96_softc {
1995-04-21 06:47:35 +04:00
struct device sc_dev;
1995-04-21 06:47:35 +04:00
void *reg_base;
int adapter_target;
struct scsi_link sc_link;
1995-07-04 18:38:49 +04:00
};
#define WAIT_FOR(reg, val) { \
int timeo=100000; \
while (!(reg & val)) { \
if (!(--timeo)) { \
printf("scsi96: WAIT_FOR timeout.\n"); \
goto have_error; \
} \
} \
}
1995-07-04 18:38:49 +04:00
static unsigned int ncr53c96_adapter_info(struct ncr53c96_softc * ncr53c96);
static void ncr53c96_minphys(struct buf * bp);
1995-04-21 06:47:35 +04:00
static int ncr53c96_scsi_cmd(struct scsi_xfer * xs);
1995-04-21 06:47:35 +04:00
static int ncr53c96_show_scsi_cmd(struct scsi_xfer * xs);
static int ncr53c96_reset_target(int adapter, int target);
static int ncr53c96_poll(int adapter, int timeout);
static int ncr53c96_send_cmd(struct scsi_xfer * xs);
1995-04-21 06:47:35 +04:00
struct scsi_adapter ncr53c96_switch = {
ncr53c96_scsi_cmd, /* scsi_cmd() */
ncr53c96_minphys, /* scsi_minphys() */
0, /* open_target_lu() */
0, /* close_target_lu() */
};
/* This is copied from julian's bt driver */
/* "so we have a default dev struct for our link struct." */
struct scsi_device ncr53c96_dev = {
1995-04-21 06:47:35 +04:00
NULL, /* Use default error handler. */
NULL, /* have a queue, served by this (?) */
NULL, /* have no async handler. */
NULL, /* Use default "done" routine. */
};
1995-04-21 06:47:35 +04:00
extern int matchbyname();
static int ncr96probe();
static void ncr96attach();
struct cfdriver ncr96scsicd =
1995-04-21 06:47:35 +04:00
{NULL, "ncr96scsi", ncr96probe, ncr96attach,
1995-07-04 18:38:49 +04:00
DV_DULL, sizeof(struct ncr53c96_softc), NULL, 0};
static int
ncr96_print(aux, name)
1995-04-21 06:47:35 +04:00
void *aux;
char *name;
{
1995-04-21 06:47:35 +04:00
/* printf("%s: (sc_link = 0x%x)", name, (int) aux); return UNCONF; */
}
static int
1995-07-04 18:38:49 +04:00
ncr96probe(parent, match, aux)
1995-04-21 06:47:35 +04:00
struct device *parent;
1995-07-04 18:38:49 +04:00
void *match;
void *aux;
{
1995-04-21 06:47:35 +04:00
static int probed = 0;
1995-07-04 18:38:49 +04:00
struct ncr53c96_softc *ncr53c96;
return 0;
if (!mac68k_machine.scsi96) {
return 0;
}
1995-07-04 18:38:49 +04:00
ncr53c96 = (struct ncr53c96_softc *) match;
if (strcmp(*((char **) aux), ncr53c96->sc_dev.dv_xname)) {
return 0;
}
if (!probed) {
probed = 1;
1995-07-04 18:38:49 +04:00
ncr53c96base += SCSIBase;
}
return 1;
}
static void
ncr96attach(parent, dev, aux)
1995-04-21 06:47:35 +04:00
struct device *parent, *dev;
void *aux;
{
1995-04-21 06:47:35 +04:00
int unit = dev->dv_unit;
1995-07-04 18:38:49 +04:00
struct ncr53c96_softc *ncr53c96;
1995-04-21 06:47:35 +04:00
int r;
1995-07-04 18:38:49 +04:00
ncr53c96 = (struct ncr53c96_softc *) dev;
ncr53c96->sc_link.scsibus = unit;
ncr53c96->sc_link.adapter_target = 7;
ncr53c96->sc_link.adapter = &ncr53c96_switch;
ncr53c96->sc_link.device = &ncr53c96_dev;
1995-07-04 18:38:49 +04:00
ncr53c96->sc_link.openings = 1;
#ifdef SCSIDEBUG
ncr53c96->sc_link.flags = SDEV_DB1 | SDEV_DB2 /* | SDEV_DB3 | SDEV_DB4 */ ;
#endif
printf("\n");
config_found(dev, &(ncr53c96->sc_link), ncr96_print);
/*
* Enable IRQ and DRQ interrupts.
via_reg(VIA2, vIER) = (V2IF_IRQ | V2IF_SCSIDRQ | V2IF_SCSIIRQ);
*/
}
1995-04-21 06:47:35 +04:00
#define MIN_PHYS 65536 /* BARF!!!! */
static void
1995-04-21 06:47:35 +04:00
ncr53c96_minphys(struct buf * bp)
{
if (bp->b_bcount > MIN_PHYS) {
printf("Uh-oh... ncr53c96_minphys setting bp->b_bcount "
1995-04-21 06:47:35 +04:00
"= %x.\n", MIN_PHYS);
bp->b_bcount = MIN_PHYS;
}
minphys(bp);
}
#undef MIN_PHYS
static int
1995-04-21 06:47:35 +04:00
ncr53c96_scsi_cmd(struct scsi_xfer * xs)
{
1995-04-21 06:47:35 +04:00
int flags, s, r;
flags = xs->flags;
1995-04-21 06:47:35 +04:00
if (xs->bp)
flags |= (SCSI_NOSLEEP);
if (flags & ITSDONE) {
printf("Already done?");
xs->flags &= ~ITSDONE;
}
1995-04-21 06:47:35 +04:00
if (!(flags & INUSE)) {
printf("Not in use?");
xs->flags |= INUSE;
}
1995-04-21 06:47:35 +04:00
if (flags & SCSI_RESET) {
printf("flags & SCSIRESET.\n");
1995-04-21 06:47:35 +04:00
if (!(flags & SCSI_NOSLEEP)) {
s = splbio();
ncr53c96_reset_target(xs->sc_link->scsibus,
1995-04-21 06:47:35 +04:00
xs->sc_link->target);
splx(s);
1995-04-21 06:47:35 +04:00
return (SUCCESSFULLY_QUEUED);
} else {
ncr53c96_reset_target(xs->sc_link->scsibus,
1995-04-21 06:47:35 +04:00
xs->sc_link->target);
if (ncr53c96_poll(xs->sc_link->scsibus, xs->timeout)) {
return (COMPLETE);
}
return (COMPLETE);
}
}
/*
* OK. Now that that's over with, let's pack up that
* SCSI puppy and send it off. If we can, we'll just
* queue and go; otherwise, we'll wait for the command
* to finish.
if ( ! ( flags & SCSI_NOSLEEP ) ) {
s = splbio();
ncr53c96_send_cmd(xs);
splx(s);
return(SUCCESSFULLY_QUEUED);
}
*/
r = ncr53c96_send_cmd(xs);
xs->flags |= ITSDONE;
scsi_done(xs);
1995-04-21 06:47:35 +04:00
switch (r) {
case COMPLETE:
case SUCCESSFULLY_QUEUED:
r = SUCCESSFULLY_QUEUED;
if (xs->flags & SCSI_POLL)
r = COMPLETE;
break;
default:
break;
}
return r;
/*
do {
if (ncr53c96_poll(xs->sc_link->scsibus, xs->timeout)) {
if ( ! ( xs->flags & SCSI_SILENT ) )
printf("cmd fail.\n");
cmd_cleanup
xs->error = XS_DRIVER_STUFFUP;
splx(s);
}
} while ( ! ( xs->flags & ITSDONE ) );
*/
}
static int
1995-04-21 06:47:35 +04:00
ncr53c96_show_scsi_cmd(struct scsi_xfer * xs)
{
1995-04-21 06:47:35 +04:00
u_char *b = (u_char *) xs->cmd;
int i = 0;
1995-04-21 06:47:35 +04:00
if (!(xs->flags & SCSI_RESET)) {
printf("ncr53c96(%d:%d:%d)-",
1995-04-21 06:47:35 +04:00
xs->sc_link->scsibus, xs->sc_link->target,
xs->sc_link->lun);
while (i < xs->cmdlen) {
1995-04-21 06:47:35 +04:00
if (i)
printf(",");
printf("%x", b[i++]);
}
printf("-\n");
} else {
printf("ncr53c96(%d:%d:%d)-RESET-\n",
1995-04-21 06:47:35 +04:00
xs->sc_link->scsibus, xs->sc_link->target,
xs->sc_link->lun);
}
}
/*
* Actual chip control.
*/
extern void
ncr53c96_intr(int adapter)
{
}
extern int
ncr53c96_irq_intr(void)
{
printf("irq\n");
return 1;
}
extern int
ncr53c96_drq_intr(void)
{
printf("drq\n");
return 1;
}
static int
ncr53c96_reset_target(int adapter, int target)
{
}
static int
ncr53c96_poll(int adapter, int timeout)
{
}
static int
1995-04-21 06:47:35 +04:00
do_send_cmd(struct scsi_xfer * xs)
{
1995-04-21 06:47:35 +04:00
struct ncr53c96regs *ncr = (struct ncr53c96regs *) ncr53c96base;
u_char *cmd;
int i, stat, is, intr;
int status, msg, phase;
1995-04-21 06:47:35 +04:00
xs->resid = 0;
i = (int) ncr->statreg; /* clear interrupts */
ncr->cmdreg = NCR96_CMD_CLRFIFO; /* and fifo */
cmd = (u_char *) xs->cmd;
1995-04-21 06:47:35 +04:00
for (i = 0; i < xs->cmdlen; i++)
ncr->fifo = *cmd++;
ncr->tcreg_lsb = xs->cmdlen;
ncr->tcreg_msb = 0;
1995-04-21 06:47:35 +04:00
ncr->stimreg = 122; /* XXX */
ncr->sdidreg = xs->sc_link->target;
/* ncr->ctrlreg1 = 0x47; from the mac -- inherited*/
ncr->cmdreg = NCR96_CMD_SEL;
WAIT_FOR(ncr->statreg, NCR96_STAT_INT);
stat = ncr->statreg;
is = ncr->isreg;
intr = ncr->instreg;
1995-04-21 06:47:35 +04:00
if ((is & 0x07) != 0x4 || intr != 0x18) {
if ((is & 0x7) != 0x0 || intr != 0x20) {
printf("scsi96: stat = 0x%x, is = 0x%x, intr = 0x%x\n",
1995-04-21 06:47:35 +04:00
stat, is, intr);
}
goto have_error;
}
printf("scsi96: before loop: stat = 0x%x, is = 0x%x, intr = 0x%x, "
1995-04-21 06:47:35 +04:00
"datalen = %d\n", stat, is, intr, xs->datalen);
phase = ncr->statreg & NCR96_STAT_PHASE;
if (((phase == 0x01) || (phase == 0x00)) && xs->datalen) {
1995-04-21 06:47:35 +04:00
printf("data = 0x%x, datalen = 0x%x.\n", xs->data, xs->datalen);
stat = ncr->statreg;
1995-04-21 06:47:35 +04:00
is = ncr->isreg;
intr = ncr->instreg;
printf("entering info xfer...stat = 0x%x, is = 0x%x, intr = 0x%x\n",
stat, is, intr);
ncr->tcreg_lsb = (xs->datalen & 0xff);
ncr->tcreg_msb = (xs->datalen >> 8) & 0xff;
ncr->cmdreg = 0x80 | NCR96_CMD_INFOXFER;
printf("rem... %d.\n", ncr->tcreg_lsb | (ncr->tcreg_msb << 8));
i = 0;
while (i < xs->datalen) {
int d, stat;
1995-04-21 06:47:35 +04:00
WAIT_FOR(ncr->statreg, NCR96_STAT_INT);
1995-04-21 06:47:35 +04:00
stat = ncr->statreg;
1995-04-21 06:47:35 +04:00
for (d = 1000000; d && !(via_reg(VIA2, vIFR) & 0x01); d--);
if (d <= 0)
printf("read timeout.\n");
d = ncr->fifostatereg & NCR96_CF_MASK;
while (d--) {
xs->data[i++] = ncr->fifo;
printf("0x%x,", xs->data[i - 1]);
}
intr = ncr->instreg;
printf("\nin loop. stat = 0x%x, intr = 0x%x, cnt = %d. ",
stat, intr, cnt);
printf("rem... %d.\n", ncr->tcreg_lsb | (ncr->tcreg_msb << 8));
}
/* } else {
WAIT_FOR(ncr->statreg, NCR96_STAT_INT); */
}
stat = ncr->statreg;
is = ncr->isreg;
intr = ncr->instreg;
printf("past loop...stat = 0x%x, is = 0x%x, intr = 0x%x\n",
1995-04-21 06:47:35 +04:00
stat, is, intr);
ncr->cmdreg = NCR96_CMD_ICCS;
WAIT_FOR(ncr->statreg, NCR96_STAT_INT);
stat = ncr->statreg;
is = ncr->isreg;
intr = ncr->instreg;
xs->status = ncr->fifo;
msg = ncr->fifo;
ncr->cmdreg = NCR96_CMD_MSGACC;
WAIT_FOR(ncr->statreg, NCR96_STAT_INT);
stat = ncr->statreg;
is = ncr->isreg;
intr = ncr->instreg;
if (intr == 0x20 && stat == 0x90)
return COMPLETE;
have_error:
xs->error = XS_DRIVER_STUFFUP;
return COMPLETE;
}
static int
1995-04-21 06:47:35 +04:00
ncr53c96_send_cmd(struct scsi_xfer * xs)
{
1995-04-21 06:47:35 +04:00
int r = COMPLETE;
1995-04-21 06:47:35 +04:00
if (xs->sc_link->target >= 5)
ncr53c96_show_scsi_cmd(xs);
switch (xs->cmd->opcode) {
1995-04-21 06:47:35 +04:00
case 0: /* TUN */
case 0x12: /* INQUIRY */
r = do_send_cmd(xs);
default:
xs->error = XS_DRIVER_STUFFUP;
r = COMPLETE;
}
return r;
}