NetBSD/sbin/newfs_lfs/config.h

86 lines
3.2 KiB
C
Raw Normal View History

Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
/* $NetBSD: config.h,v 1.6 2001/07/13 20:30:19 perseant Exp $ */
/*-
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1998-03-01 05:20:01 +03:00
* @(#)config.h 8.3 (Berkeley) 5/24/95
*/
/*
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
* Version of the LFS to make. Default to the newest one.
*/
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#define DFL_VERSION LFS_VERSION
/*
* The following two constants set the default block and fragment sizes.
* Both constants must be a power of 2 and meet the following constraints:
* MINBSIZE <= DESBLKSIZE <= MAXBSIZE
* sectorsize <= DESFRAGSIZE <= DESBLKSIZE
* DESBLKSIZE / DESFRAGSIZE <= 8
*/
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#define DFL_FRAGSIZE 512
#define DFL_BLKSIZE 8192
/*
* 1/DFL_MIN_FREE_SEGS gives the fraction of segments to be reserved for
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
* the cleaner.
*/
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
#define DFL_MIN_FREE_SEGS 20
/*
* MINFREE gives the minimum acceptable percentage of file system
* blocks which may be free. If the freelist drops below this level
* only the superuser may continue to allocate blocks.
*/
#define MINFREE 10
/*
* The following constants set the default block and segment size for a log
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
* structured file system. The block size must be a power of two and less
* than the segment size.
*/
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#define LFS_MINSEGSIZE (64 * 1024)
#define DFL_LFSSEG (1024 * 1024)
#define DFL_LFSSEG_SHIFT 20
#define DFL_LFSSEG_MASK 0xFFFFF
#define LFS_MINBLOCKSIZE 512
#define DFL_LFSBLOCK 8192
#define DFL_LFSBLOCK_SHIFT 13
#define DFL_LFSBLOCK_MASK 0x1FFF
1998-03-01 05:20:01 +03:00
#define DFL_LFSFRAG 1024
#define DFL_LFS_FFMASK 0x3FF
#define DFL_LFS_FFSHIFT 10
#define DFL_LFS_FBMASK 0x7
#define DFL_LFS_FBSHIFT 3