NetBSD/sys/dev/ic/seeq8005reg.h

188 lines
7.6 KiB
C
Raw Normal View History

/* $NetBSD: seeq8005reg.h,v 1.4 2001/04/01 21:15:15 bjh21 Exp $ */
/*
* Copyright (c) 1995-1998 Mark Brinicombe
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Mark Brinicombe.
* 4. The name of the company nor the name of the author may be used to
* endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* SEEQ 8005/80C04/80C04A registers
*
* Note that A0 is only used to distinguish halves of 16-bit registers in
* 8-bit mode.
*/
#define SEEQ_COMMAND 0x0
#define SEEQ_STATUS 0x0
#define SEEQ_CONFIG1 0x2
#define SEEQ_CONFIG2 0x4
#define SEEQ_RX_END 0x6
#define SEEQ_BUFWIN 0x8
#define SEEQ_RX_PTR 0xa
#define SEEQ_TX_PTR 0xc
#define SEEQ_DMA_ADDR 0xe
#define SEEQ_CMD_DMA_INTEN (1 << 0) /* 8005 */
#define SEEQ_CMD_TEST_INTEN (1 << 0) /* 8004 */
#define SEEQ_CMD_RX_INTEN (1 << 1)
#define SEEQ_CMD_TX_INTEN (1 << 2)
#define SEEQ_CMD_BW_INTEN (1 << 3)
#define SEEQ_CMD_DMA_INTACK (1 << 4) /* 8005 */
#define SEEQ_CMD_TEST_INTACK (1 << 4) /* 8004 */
#define SEEQ_CMD_RX_INTACK (1 << 5)
#define SEEQ_CMD_TX_INTACK (1 << 6)
#define SEEQ_CMD_BW_INTACK (1 << 7)
#define SEEQ_CMD_DMA_ON (1 << 8) /* 8005 */
#define SEEQ_CMD_TEST_INT1 (1 << 8) /* 8004 */
#define SEEQ_CMD_RX_ON (1 << 9)
#define SEEQ_CMD_TX_ON (1 << 10)
#define SEEQ_CMD_DMA_OFF (1 << 11) /* 8005 */
#define SEEQ_CMD_TEST_INT2 (1 << 11) /* 8004 */
#define SEEQ_CMD_RX_OFF (1 << 12)
#define SEEQ_CMD_TX_OFF (1 << 13)
#define SEEQ_CMD_FIFO_READ (1 << 14)
#define SEEQ_CMD_FIFO_WRITE (1 << 15)
#define SEEQ_STATUS_DMA_INT (1 << 4) /* 8005 */
#define SEEQ_STATUS_TEST_INT (1 << 4) /* 8004 */
#define SEEQ_STATUS_RX_INT (1 << 5)
#define SEEQ_STATUS_TX_INT (1 << 6)
#define SEEQ_STATUS_BW_INT (1 << 7)
#define SEEQ_STATUS_DMA_ON (1 << 8) /* 8005 */
#define SEEQ_STATUS_TEST_ON (1 << 8) /* 8004 */
#define SEEQ_STATUS_RX_ON (1 << 9)
#define SEEQ_STATUS_TX_ON (1 << 10)
#define SEEQ_STATUS_TX_NOFAIL (1 << 12) /* 8004 */
#define SEEQ_STATUS_FIFO_FULL (1 << 13)
#define SEEQ_STATUS_FIFO_EMPTY (1 << 14)
#define SEEQ_STATUS_FIFO_DIR (1 << 15)
#define SEEQ_STATUS_FIFO_READ (1 << 15)
#define SEEQ_BUFCODE_STATION_ADDR0 0x00
#define SEEQ_BUFCODE_STATION_ADDR1 0x01 /* 8005 and 80C04A */
#define SEEQ_BUFCODE_STATION_ADDR2 0x02 /* 8005 */
#define SEEQ_BUFCODE_CRCERR_COUNT 0x02 /* 80C04A */
#define SEEQ_BUFCODE_STATION_ADDR3 0x03 /* 8005 */
#define SEEQ_BUFCODE_DRIBBLE_COUNT 0x03 /* 80C04A */
#define SEEQ_BUFCODE_STATION_ADDR4 0x04 /* 8005 */
#define SEEQ_BUFCODE_OVERSIZE_COUNT 0x04 /* 80C04A */
#define SEEQ_BUFCODE_STATION_ADDR5 0x05 /* 8005 */
#define SEEQ_BUFCODE_ADDRESS_PROM 0x06
#define SEEQ_BUFCODE_TX_EAP 0x07
#define SEEQ_BUFCODE_LOCAL_MEM 0x08
#define SEEQ_BUFCODE_INT_VECTOR 0x09 /* 8005 */
#define SEEQ_BUFCODE_LC_DFR_COUNT 0x09 /* 80C04A */
#define SEEQ_BUFCODE_TX_COLLS 0x0b /* 8004 */
#define SEEQ_BUFCODE_CONFIG3 0x0c /* 8004 */
#define SEEQ_BUFCODE_PRODUCTID 0x0d /* 8004 */
#define SEEQ_BUFCODE_TESTENABLE 0x0e /* 8004 */
#define SEEQ_BUFCODE_MULTICAST 0x0f /* 8004 */
#define SEEQ_CFG1_DMA_BURST_CONT (0 << 4) /* 8005 */
#define SEEQ_CFG1_DMA_BURST_800 (1 << 4) /* 8005 */
#define SEEQ_CFG1_DMA_BURST_1600 (2 << 4) /* 8005 */
#define SEEQ_CFG1_DMA_BURST_3200 (3 << 4) /* 8005 */
#define SEEQ_CFG1_DMA_BSIZE_1 (0 << 6) /* 8005 */
#define SEEQ_CFG1_DMA_BSIZE_4 (1 << 6) /* 8005 */
#define SEEQ_CFG1_DMA_BSIZE_8 (2 << 6) /* 8005 */
#define SEEQ_CFG1_DMA_BSIZE_16 (3 << 6) /* 8005 */
#define SEEQ_CFG1_STATION_ADDR0 (1 << 8) /* 8005 */
#define SEEQ_CFG1_STATION_ADDR1 (1 << 9) /* 8005 */
#define SEEQ_CFG1_STATION_ADDR2 (1 << 10) /* 8005 */
#define SEEQ_CFG1_STATION_ADDR3 (1 << 11) /* 8005 */
#define SEEQ_CFG1_STATION_ADDR4 (1 << 12) /* 8005 */
#define SEEQ_CFG1_STATION_ADDR5 (1 << 13) /* 8005 */
#define SEEQ_CFG1_SPECIFIC ((0 << 15) | (0 << 14))
#define SEEQ_CFG1_BROADCAST ((0 << 15) | (1 << 14))
#define SEEQ_CFG1_MULTICAST ((1 << 15) | (0 << 14))
#define SEEQ_CFG1_PROMISCUOUS ((1 << 15) | (1 << 14))
#define SEEQ_CFG2_BYTESWAP (1 << 0)
#define SEEQ_CFG2_REA_AUTOUPDATE (1 << 1) /* 8004 only */
#define SEEQ_CFG2_RX_TX_DISABLE (1 << 2) /* 8004 only */
#define SEEQ_CFG2_CRC_ERR_ENABLE (1 << 3)
#define SEEQ_CFG2_DRIB_ERR_ENABLE (1 << 4)
#define SEEQ_CFG2_PASS_SHORT (1 << 5) /* 8005 */
#define SEEQ_CFG2_PASS_LONGSHORT (1 << 5) /* 8004 */
#define SEEQ_CFG2_SLOT_SELECT (1 << 6) /* 8005 only */
#define SEEQ_CFG2_PREAM_SELECT (1 << 7)
#define SEEQ_CFG2_ADDR_LENGTH (1 << 8) /* 8005 only */
#define SEEQ_CFG2_RX_CRC (1 << 9)
#define SEEQ_CFG2_NO_TX_CRC (1 << 10)
#define SEEQ_CFG2_LOOPBACK (1 << 11)
#define SEEQ_CFG2_OUTPUT (1 << 12)
#define SEEQ_CFG2_RESET (1 << 15)
#define SEEQ_CFG3_AUTOPAD (1 << 0) /* 80C04 */
#define SEEQ_CFG3_SAHASHENABLE (1 << 1) /* 80C04A */
#define SEEQ_CFG3_SQEENABLE (1 << 2) /* 80C04 */
#define SEEQ_CFG3_SLEEP (1 << 3) /* 80C04 */
#define SEEQ_CFG3_READYADVD (1 << 4) /* 80C04 only */
#define SEEQ_CFG3_SECONDADDRENABLE (1 << 5) /* 80C04A */
#define SEEQ_CFG3_GROUPADDR (1 << 6) /* 80C04 */
#define SEEQ_CFG3_NPPBYTE (1 << 7) /* 80C04 */
#define SEEQ_PRODUCTID_MASK 0xf0
#define SEEQ_PRODUCTID_8004 0xa0
#define SEEQ_PRODUCTID_REV_MASK 0x0f
#define SEEQ_PRODUCTID_REV_80C04 0x0f
#define SEEQ_PRODUCTID_REV_80C04A 0x0e
#define SEEQ_PKTCMD_TX (1 << 7)
#define SEEQ_PKTCMD_RX (0 << 7)
#define SEEQ_PKTCMD_CHAIN_CONT (1 << 6)
#define SEEQ_PKTCMD_DATA_FOLLOWS (1 << 5)
#define SEEQ_PKTSTAT_DONE (1 << 7)
#define SEEQ_TXSTAT_BABBLE (1 << 0)
#define SEEQ_TXSTAT_COLLISION (1 << 1)
#define SEEQ_TXSTAT_COLLISION16 (1 << 2)
#define SEEQ_TXSTAT_COLLISIONS_SHIFT 3 /* SEEQ 8004 */
#define SEEQ_TXSTAT_COLLISION_MASK 0x0f /* SEEQ 8004 */
#define SEEQ_TXSTAT_CARRIER_DROPOUT (1 << 3) /* SEEQ 80C04A */
#define SEEQ_TXSTAT_OK_BUT_DEFERRED (1 << 4) /* SEEQ 80C04A */
#define SEEQ_TXSTAT_OK_BUT_COLLISIONS (1 << 5) /* SEEQ 80C04A */
#define SEEQ_TXSTAT_OK_BUT_COLLISION (1 << 6) /* SEEQ 80C04A */
#define SEEQ_TXCMD_BABBLE_INT (1 << 0)
#define SEEQ_TXCMD_COLLISION_INT (1 << 1)
#define SEEQ_TXCMD_COLLISION16_INT (1 << 2)
#define SEEQ_TXCMD_XMIT_SUCCESS_INT (1 << 3)
#define SEEQ_TXCMD_SQE_TEST_INT (1 << 4) /* SEEQ 8004 */
#define SEEQ_RXSTAT_OVERSIZE (1 << 0)
#define SEEQ_RXSTAT_CRC_ERROR (1 << 1)
#define SEEQ_RXSTAT_DRIBBLE_ERROR (1 << 2)
#define SEEQ_RXSTAT_SHORT_FRAME (1 << 3)
#define SEEQ_RXSTAT_ERROR_MASK 0x0f
#define SEEQ_MAX_BUFFER_SIZE 0x10000