NetBSD/sys/arch/hp300/conf/Makefile.hp300

#	from: @(#)Makefile.hp300	8.2 (Berkeley) 1/23/94
#	$Id: Makefile.hp300,v 1.18 1994/07/18 07:15:49 mycroft Exp $
#
# Makefile for NetBSD
#
# This makefile is constructed from a machine description:
#	config machineid
# Most changes should be made in the machine description
#	/sys/arch/hp300/conf/``machineid''
# after which you should do
#	 config machineid
# Machine generic makefile changes should be made in
#	/sys/arch/hp300/conf/Makefile.hp300
# after which config should be rerun for all machines of that type.
#
# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE
#	IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING
#
# -DTRACE	compile in kernel tracing hooks
# -DQUOTA	compile in file system quotas


# DEBUG is set to -g by config if debugging is requested (config -g).
# PROF is set to -pg by config if profiling is requested (config -p).
AS=	as ${DEBUG}
CC=	cc ${DEBUG}
CPP=	cpp
LD=	ld
TOUCH=	touch -f -c
AWK=	awk

# source tree is located via $S relative to the compilation directory
S=	../../../..
HP300=	../..

INCLUDES= -I. -I$S/arch -I$S -I$S/sys
COPTS=	${INCLUDES} ${IDENT} -DKERNEL -Dmc68020 -Dhp300 -DFPCOPROC
CFLAGS=	-O6 ${COPTS}

### find out what to use for libkern
.include "$S/lib/libkern/Makefile.inc"
.ifndef PROF
LIBKERN=	${KERNLIB}
.else
LIBKERN=	${KERNLIB_PROF}
.endif

### for the Motorola 68040 Floating Point Software Product
.include "$S/arch/m68k/fpsp/Makefile.inc"

# compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP}
# where TYPE is NORMAL, DRIVER, or PROFILE}; SUFFIX is the file suffix,
# capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file
# is marked as config-dependent.

NORMAL_C=	${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C=	${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<

DRIVER_C=	${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C=	${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<

PROFILE_C=	${CC} -S -c ${COPTS} $<; \
		sed -e s/_mcount/mcount/ -e s/subrmcount/subr_mcount/ <$*.s | \
		${AS} -o $@; \
		rm -f $*.s

NORMAL_S=	${CPP} ${COPTS} $< | ${AS} -o $@
NORMAL_S_C=	${CPP} ${COPTS} ${PARAM} $< | ${AS} -o $@

%OBJS

%CFILES

# load lines for config "xxx" will be emitted as:
# xxx: ${SYSTEM_DEP} swapxxx.o
#	${SYSTEM_LD_HEAD}
#	${SYSTEM_LD} swapxxx.o
#	${SYSTEM_LD_TAIL}
SYSTEM_OBJ=	locore.o ${FPSP} vnode_if.o ${OBJS} param.o ioconf.o ${LIBKERN}
SYSTEM_DEP=	Makefile ${SYSTEM_OBJ}
SYSTEM_LD_HEAD=	rm -f $@
SYSTEM_LD=	-@if [ X${DEBUG} = X-g ]; \
		then strip=-X; \
		else strip=-x; \
		fi; \
		echo ${LD} $$strip -n -T 0 -o $@ -e start '$${SYSTEM_OBJ}' vers.o; \
		${LD} $$strip -n -T 0 -o $@ -e start ${SYSTEM_OBJ} vers.o
SYSTEM_LD_TAIL=	@size $@; chmod 755 $@; \
		[ X${DEBUG} = X-g ] && { \
		echo cp $@ $@.gdb; rm -f $@.gdb; cp $@ $@.gdb; \
		echo strip -d $@; strip -d $@; } || true

%LOAD

vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
	sh $S/conf/newvers.sh
	${CC} ${CFLAGS} -c vers.c

clean:
	rm -f eddep *netbsd netbsd.gdb tags *.o locore.i [a-z]*.s \
		[Ee]rrs linterrs makelinks

lint: /tmp param.c
	@lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \
	    ${HP300}/hp300/Locore.c ${CFILES} ${HP300}/hp300/swapgeneric.c \
	    ioconf.c param.c | \
	    grep -v 'struct/union .* never defined' | \
	    grep -v 'possible pointer alignment problem'

locore.o: assym.s ${HP300}/hp300/vectors.s ${HP300}/hp300/locore.s 
locore.o: ${HP300}/include/trap.h ${HP300}/include/psl.h ${HP300}/include/pte.h
locore.o: ${HP300}/include/cpu.h
	${CPP} -DLOCORE ${COPTS} ${HP300}/hp300/locore.s | ${AS} -o locore.o

# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile

# the following are necessary because the files depend on the types of
# hp cpu's included in the system configuration
machdep.o sys_machdep.o pmap.o pmap_bootstrap.o trap.o dma.o: Makefile

# depend on network or filesystem configuration
uipc_proto.o vfs_conf.o locore.o: Makefile

# depend on maxusers
assym.s: Makefile

assym.s: genassym
	./genassym >assym.s

genassym:
	${CC} ${INCLUDES} ${IDENT} ${PARAM} -Dmc68020 -Dhp300 -o genassym \
	    ${HP300}/hp300/genassym.c

depend: assym.s param.c vnode_if.h
	mkdep ${COPTS} ${CFILES} ioconf.c param.c
	mkdep -a -p ${INCLUDES} ${IDENT} ${PARAM} ${HP300}/hp300/genassym.c

links:
	egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
	  sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
	echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
	  sort -u | comm -23 - dontlink | \
	  sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
	sh makelinks && rm -f dontlink

tags:
	@echo "see $S/kern/Makefile for tags"

ioconf.o: ioconf.c
	${CC} -c ${CFLAGS} ioconf.c

param.c: $S/conf/param.c
	rm -f param.c
	cp $S/conf/param.c .

param.o: param.c Makefile
	${CC} -c ${CFLAGS} ${PARAM} param.c

vnode_if.c vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
	AWK="${AWK}" sh $S/kern/vnode_if.sh $S/kern/vnode_if.src

%RULES