NetBSD/distrib/notes/vax/hardware

.\"	$NetBSD: hardware,v 1.6 2000/10/10 12:55:23 lukem Exp $
.
.Ss2 Supported hardware
.(bullet -offset indent
CPU types
.(bullet -compact
VAX 11/750
.It
VAX 11/78{0,5}
.It
VAX 8200/8250/8300/8350
.It
VAX 8600/8650
.It
MicroVAX/VAXstation II
.It
MicroVAX III
.It
MicroVAX 3300/3400
.It
MicroVAX 3500/3600
.It
MicroVAX 3800/3900
.It
MicroVAX 2000/VAXstation 2000
.It
VAXstation 3100 model 30,38,40,48,76
.It
MicroVAX 3100 (partly)
.It
VAXstation 3200/3500
.It
VAXstation 4000/60
.bullet)
.It
Networking
.(bullet -compact
DEUNA/DELUA Unibus ethernet
.It
DEQNA/DELQA Q22 bus ethernet
.It
LANCE chip (where available)
.bullet)
.It
Serial lines
.(bullet -compact
DHU11/DHV11/DL11/DLV11/DZ11/DZQ11/DZV11 Unibus/Q22 bus asynchronous lines
.It
DZ11-compatible lines on VAXstations.
.bullet)
.It
Disks
.(bullet -compact
UDA50 Unibus MSCP controller
.It
KDA50/RQDX1/2/3 Q22 bus
.It
MSCP controller
.It
KDB50 BI-bus MSCP controller
.It
MFM and SCSI controllers on VAXstations
.It
RP04/05/06/07 and RM02/03/05/80 Massbus disks
.It
Console RL02 on VAX 8600.
.bullet)
.Pp
Some third-party controllers are also known to work, other do not.
.It
Tapes
.(bullet -compact
TMSCP on Q22 bus (TK50/70, TU81)
.It
TMSCP on BI bus
.It
SCSI tapes on VAXstations.
.bullet)
.It
Floppy
.(bullet -compact
RX33/RX50 on RQDX controllers
.It
RX50 on VAX 8200
.bullet)
.bullet)
.Pp
The minimal configuration requires 2 MB of RAM and ~40 MB of disk space,
but the installation really requires 6 MB RAM unless you plan on
using Jedi powers.
.Pp
Here is a table of recommended HD partition sizes for a full install:
.Pp
.Bl -column -offset indent Partition Suggested Needed
.It Partition Ta Suggested Ta Needed
.It root\ (/) Ta "32 MB"   Ta "16 MB"
.It /usr      Ta "110 MB"  Ta "45 MB"
.It /var      Ta "20 MB"   Ta "5 MB"
.It swap      Ta Em 2-3 *RAM
.El
.(item -offset indent
Anything else is up to you!
.item)