Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
55648b014b
NetBSD/sys/arch/arm26/conf/files.arm26

240 lines
6.9 KiB
Plaintext
Raw Normal View History

Add machdep file for procfs. Currently only used for linux-style /proc/cpuinfo (only active when procfs is mounted with -o linux). For ports other than the i386 this currently produces an empty string.
2001-01-17 03:07:18 +03:00
# $NetBSD: files.arm26,v 1.17 2001/01/17 00:07:21 fvdl Exp $
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
# Copyright (c) 1997, 1998, 2000 Ben Harris
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. The name of the author may not be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# This file is part of NetBSD/arm26 -- a port of NetBSD to ARM2/3 machines.
maxpartitions 8
maxusers 2 8 64
include "dev/wscons/files.wscons"
include "dev/rasops/files.rasops"
include "dev/wsfont/files.wsfont"
include "dev/ata/files.ata"
major { wd = 4 }
include "dev/scsipi/files.scsipi"
major {sd = 5}
major {cd = 6}
# CPU
Stub FPU driver -- identifies FPUs and warns they aren't supported. e.g: cpu0 (root): ARM2 fpu0 at cpu0: FPPC/WE32206 fpu0: WARNING: FPU type not supported by kernel
2000-12-23 16:37:02 +03:00
device cpu { }
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
attach cpu at root
defopt opt_cputypes.h CPU_ARM2 CPU_ARM250 CPU_ARM3
file arch/arm26/arm26/cpu.c cpu
Stub FPU driver -- identifies FPUs and warns they aren't supported. e.g: cpu0 (root): ARM2 fpu0 at cpu0: FPPC/WE32206 fpu0: WARNING: FPU type not supported by kernel
2000-12-23 16:37:02 +03:00
# Floating-point unit
device fpu
attach fpu at cpu
defopt opt_fputypes.h FPU_FPPC FPU_FPA
file arch/arm26/arm26/fpu.c fpu needs-flag
Start merging actual code in arm32 and arm26: arm32/arm32/in_cksum_arm32.c -> arm/arm/in_cksum_arm.c Also move specification of other checksum stuff to files.arm, even though we use the MI code for that.
2001-01-12 02:27:26 +03:00
file arch/arm26/arm26/fpu_asm.S fpu
Stub FPU driver -- identifies FPUs and warns they aren't supported. e.g: cpu0 (root): ARM2 fpu0 at cpu0: FPPC/WE32206 fpu0: WARNING: FPU type not supported by kernel
2000-12-23 16:37:02 +03:00
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
# I/O bus (on the far side of the address and data latches)
device iobus { base = -1 }
attach iobus at root
file arch/arm26/iobus/iobus.c iobus
# 82C710/1 on A5000 etc will be at iobus0 base 0x00010000 (and 0x00012000???)
# I/O controller (Albion) (usually at iobus0 base 0x00200000)
device ioc { [bank = -1], [offset = 0] }
attach ioc at iobus
file arch/arm26/iobus/ioc.c ioc needs-flag
# I^2C bus (bit-banged through IOC control register)
device iic { addr = -1 }
attach iic at ioc
file arch/arm26/ioc/iic.c iic
# PCF8583 I^2C Clock/calendar/RAM
device rtc
attach rtc at iic
file arch/arm26/ioc/rtc.c rtc
file dev/clock_subr.c rtc
# I/O Extension Block (usually at ioc0 bank 5)
device ioeb { [offset = -1] }
attach ioeb at ioc
file arch/arm26/ioc/ioeb.c ioeb needs-flag
# A3010 joysticks
device joy
attach joy at ioeb
# Latches (random internal use) (usually at bank 5 offset 0x18 and 0x40)
device latch
attach latch at ioc
# On-board keyboard interface
device arckbd { }
attach arckbd at ioc
device arcwskbd: wskbddev
attach arcwskbd at arckbd
device arcwsmouse: wsmousedev
attach arcwsmouse at arckbd
file arch/arm26/ioc/arckbd.c arckbd needs-flag
file arch/arm26/ioc/arckbdmap.c arckbd
# On-board WD 1772 floppy controller (usually at bank 1 irq 12 fiq 0/1)
# Not to be confused with fdc, which will be the PC-style one on A5k etc.
device wfdc {drive = -1}
attach wfdc at ioc
device wf: disk
attach wf at wfdc
# Steal code from arch/atari/dev/fd{.c,reg.h}
#major {...}
# Econet module (Motorola 6854) (usually at bank 2 fiq 2)
device ec: ifnet, arp
attach ec at ioc
# On-board Rockwell 6551 serial (usually at bank 3 irq 10/1)
device rs: tty
attach rs at ioc
file arch/arm26/arm26/rscons.c rs needs-flag
# Podule interface (podules listed later) (usually at bank 4 irq 13 fiq 6)
# Unix backplanes also use bank 6
# MEMC podules also use the iobus directly
# XXX How on Earth do we codify all that?
device unixbp
attach unixbp at ioc
device podulebus { [slot = -1] }
attach podulebus at ioc
Add support for using RISC OS podule loaders to get at ROM chunks on podules. By default, they aren't used, since most cards seem to put the non-OS-dependent stuff in the main chunk directory. i-cubed cards are a notable exception.
2000-12-20 13:57:38 +03:00
define podloader
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
file arch/arm26/podulebus/podulebus.c podulebus
Add support for using RISC OS podule loaders to get at ROM chunks on podules. By default, they aren't used, since most cards seem to put the non-OS-dependent stuff in the main chunk directory. i-cubed cards are a notable exception.
2000-12-20 13:57:38 +03:00
file arch/arm26/podulebus/podloader_asm.S podloader needs-flag
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
file arch/arm26/podulebus/unixbp.c unixbp needs-flag
# Acorn ST506 interface (usually at bank 5 irq 11, or sometimes on a podule)
device hdc { drive = -1 }
attach hdc at ioc with hdc_ioc
attach hdc at podulebus with hdc_podulebus
device hd: disk
attach hd at hdc
#major {hd = ?}
# On-board printer port (usually at bank 5 addr 0x10 irq 0/2)
device arclpt
attach arclpt at ioc
# VIDC/MEMC audio/video subsystems.
# XXX: should be rasops4 as well
device arcvideo: rasops1, rasops2, rasops8, wsemuldisplaydev
attach arcvideo at root
file arch/arm26/vidc/arcvideo.c arcvideo needs-flag
device arcaudio: audio
attach arcaudio at root
Basic driver for CHIPS 82C710 Universal Peripheral Controller and friends, as used on later arm26 system (A5000, A4, A3010, A3020, A4000). What we have got: ... upc0 at iobus0 base 0x010000: config state bb 87 1c 00 00 fdc at upc0 offset 0x3f4 not configured wdc0 at upc0 offset 0x1f0 lpt0 at upc0 offset 0x278 com0 at upc0 offset 0x3f8: ns8250 or ns16450, no fifo ... What we haven't got: - FDC support (found, but not configured). - Clearing lpt interrupts on arm26 systems (needs help from IOEB). - A upc(4) manual page. - More than minimal testing (my A3020s don't have root devices). - A proper probe routine (arm26 can't use one anyway).
2000-08-17 03:56:08 +04:00
###
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
# 82C7xx Universal Peripheral Controller
Basic driver for CHIPS 82C710 Universal Peripheral Controller and friends, as used on later arm26 system (A5000, A4, A3010, A3020, A4000). What we have got: ... upc0 at iobus0 base 0x010000: config state bb 87 1c 00 00 fdc at upc0 offset 0x3f4 not configured wdc0 at upc0 offset 0x1f0 lpt0 at upc0 offset 0x278 com0 at upc0 offset 0x3f8: ns8250 or ns16450, no fifo ... What we haven't got: - FDC support (found, but not configured). - Clearing lpt interrupts on arm26 systems (needs help from IOEB). - A upc(4) manual page. - More than minimal testing (my A3020s don't have root devices). - A proper probe routine (arm26 can't use one anyway).
2000-08-17 03:56:08 +04:00
#
# This section belongs in sys/conf/files, but some ports have their own
# "lpt" devices, so it has to stay here.
device lpt
file dev/ic/lpt.c lpt needs-flag
attach lpt at upc with lpt_upc
file dev/ic/lpt_upc.c lpt_upc
# This section belongs here
attach upc at iobus with upc_iobus
file arch/arm26/iobus/upc_iobus.c upc_iobus
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
###
# Assorted podules
#
# Acorn Ether1
device ei: ether, ifnet, arp, i82586
attach ei at podulebus
file arch/arm26/podulebus/if_ei.c ei
# Acorn/Atomwide Ether3
Split the arm26 Ether3 (ea) driver into an MI driver for the SEEQ 8005 chip, and a front-end driver for the Ether3. Only semantic change is to remove ea_claimirq() and ea_releaseirq() on the grounds that the seem too spurious to warrant a callback to the front-end.
2000-09-19 00:51:14 +04:00
device ea: ether, ifnet, arp, seeq8005
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
attach ea at podulebus
file arch/arm26/podulebus/if_ea.c ea
First attempt at an EtherH driver. Can just about transmit and receive packets. Interrupt enabling is left to the RISC OS driver, medium selection is untested and it's hard-wired to the MAC address of my card. Not really for production use.
2000-12-01 17:28:36 +03:00
# i-cubed EtherLAN 100, 200 and 500
Add support for using RISC OS podule loaders to get at ROM chunks on podules. By default, they aren't used, since most cards seem to put the non-OS-dependent stuff in the main chunk directory. i-cubed cards are a notable exception.
2000-12-20 13:57:38 +03:00
device eh: ether, ifnet, arp, dp8390nic, podloader
First attempt at an EtherH driver. Can just about transmit and receive packets. Interrupt enabling is left to the RISC OS driver, medium selection is untested and it's hard-wired to the MAC address of my card. Not really for production use.
2000-12-01 17:28:36 +03:00
attach eh at podulebus
file arch/arm26/podulebus/if_eh.c eh
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
# D.T. software IDE
device dtide {[channel = -1]}: wdc_base, ata, atapi
attach dtide at podulebus
file arch/arm26/podulebus/dtide.c dtide
# Generic sbic (WD3393) driver
define sbic
file arch/arm26/podulebus/sbic.c sbic
# Acorn SCSI I specific layer for sbic
device asc: scsi, sbic
attach asc at podulebus
file arch/arm26/podulebus/asc.c asc needs-flag
# Memory disk for installation (or ROM versions?)
Follow the herd: Use the MI md_root.c.
2000-12-26 22:55:52 +03:00
file dev/md_root.c memory_disk_hooks
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
major { md = 1 }
####
# Other files
#
file dev/cons.c
file dev/cninit.c
file arch/arm26/arm26/db_interface.c ddb
file arch/arm26/arm26/db_machdep.c ddb
file arch/arm26/arm26/db_trace.c ddb
file arch/arm26/arm26/disksubr.c disk
file arch/arm26/arm26/disksubr_mbr.c disk
file arch/arm26/arm26/disksubr_acorn.c disk
file arch/arm26/arm26/start.c
file arch/arm26/arm26/autoconf.c
file arch/arm26/arm26/bus.c
file arch/arm26/arm26/conf.c
file arch/arm26/arm26/cons_machdep.c
file arch/arm26/arm26/copyinout.S
file arch/arm26/arm26/except.c
file arch/arm26/arm26/irq.c
file arch/arm26/arm26/Locore.c
file arch/arm26/arm26/machdep.c
file arch/arm26/arm26/mem.c
file arch/arm26/arm26/pmap.c
Implement the easy ptrace requests and turn off the difficult ones.
2000-08-20 19:16:49 +04:00
file arch/arm26/arm26/process_machdep.c
Add machdep file for procfs. Currently only used for linux-style /proc/cpuinfo (only active when procfs is mounted with -o linux). For ports other than the i386 this currently produces an empty string.
2001-01-17 03:07:18 +03:00
file arch/arm26/arm26/procfs_machdep.c procfs
Initial commit of arm26 port
2000-05-10 01:55:44 +04:00
#file arch/arm26/arm26/rscons.c
file arch/arm26/arm26/softintr.c
file arch/arm26/arm26/stubs.c
file arch/arm26/arm26/vm_machdep.c
Reference in New Issue Copy Permalink