Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
/* $NetBSD: ieee80211.h,v 1.15 2005/11/18 16:40:08 skrll Exp $ */
|
2003-08-31 01:26:03 +04:00
|
|
|
/*-
|
|
|
|
|
* Copyright (c) 2001 Atsushi Onoe
|
2005-06-22 10:14:51 +04:00
|
|
|
* Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
|
2003-08-31 01:26:03 +04:00
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
|
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
|
|
|
* Software Foundation.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
* $FreeBSD: src/sys/net80211/ieee80211.h,v 1.10 2005/07/22 16:55:27 sam Exp $
|
2003-08-31 01:26:03 +04:00
|
|
|
*/
|
|
|
|
|
#ifndef _NET80211_IEEE80211_H_
|
|
|
|
|
#define _NET80211_IEEE80211_H_
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* 802.11 protocol definitions.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */
|
|
|
|
|
/* is 802.11 address multicast/broadcast? */
|
|
|
|
|
#define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01)
|
|
|
|
|
|
|
|
|
|
/* IEEE 802.11 PLCP header */
|
|
|
|
|
struct ieee80211_plcp_hdr {
|
|
|
|
|
u_int16_t i_sfd;
|
|
|
|
|
u_int8_t i_signal;
|
|
|
|
|
u_int8_t i_service;
|
|
|
|
|
u_int16_t i_length;
|
|
|
|
|
u_int16_t i_crc;
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
#define IEEE80211_PLCP_SFD 0xF3A0
|
|
|
|
|
#define IEEE80211_PLCP_SERVICE 0x00
|
2003-10-13 08:28:35 +04:00
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
/*
|
|
|
|
|
* generic definitions for IEEE 802.11 frames
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_frame {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_addr1[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr2[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr3[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_seq[2];
|
|
|
|
|
/* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
|
|
|
|
|
/* see below */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
struct ieee80211_qosframe {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_addr1[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr2[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr3[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_seq[2];
|
|
|
|
|
u_int8_t i_qos[2];
|
|
|
|
|
/* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
|
|
|
|
|
/* see below */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2004-05-01 03:51:53 +04:00
|
|
|
|
|
|
|
|
struct ieee80211_qoscntl {
|
|
|
|
|
u_int8_t i_qos[2];
|
|
|
|
|
};
|
|
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
struct ieee80211_frame_addr4 {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_addr1[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr2[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr3[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_seq[2];
|
|
|
|
|
u_int8_t i_addr4[IEEE80211_ADDR_LEN];
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
|
|
|
|
|
struct ieee80211_qosframe_addr4 {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_addr1[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr2[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr3[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_seq[2];
|
|
|
|
|
u_int8_t i_addr4[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_qos[2];
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2004-05-01 03:51:53 +04:00
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
#define IEEE80211_FC0_VERSION_MASK 0x03
|
|
|
|
|
#define IEEE80211_FC0_VERSION_SHIFT 0
|
|
|
|
|
#define IEEE80211_FC0_VERSION_0 0x00
|
|
|
|
|
#define IEEE80211_FC0_TYPE_MASK 0x0c
|
|
|
|
|
#define IEEE80211_FC0_TYPE_SHIFT 2
|
|
|
|
|
#define IEEE80211_FC0_TYPE_MGT 0x00
|
|
|
|
|
#define IEEE80211_FC0_TYPE_CTL 0x04
|
|
|
|
|
#define IEEE80211_FC0_TYPE_DATA 0x08
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_MASK 0xf0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_SHIFT 4
|
|
|
|
|
/* for TYPE_MGT */
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_BEACON 0x80
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_ATIM 0x90
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0
|
|
|
|
|
/* for TYPE_CTL */
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_RTS 0xb0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CTS 0xc0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_ACK 0xd0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0
|
|
|
|
|
/* for TYPE_DATA (bit combination) */
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_DATA 0x00
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_NODATA 0x40
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CFACK 0x50
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60
|
|
|
|
|
#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
|
2004-05-01 03:51:53 +04:00
|
|
|
#define IEEE80211_FC0_SUBTYPE_QOS 0x80
|
2005-06-22 10:14:51 +04:00
|
|
|
#define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0
|
2003-08-31 01:26:03 +04:00
|
|
|
|
|
|
|
|
#define IEEE80211_FC1_DIR_MASK 0x03
|
|
|
|
|
#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */
|
|
|
|
|
#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */
|
|
|
|
|
#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */
|
|
|
|
|
#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_FC1_MORE_FRAG 0x04
|
|
|
|
|
#define IEEE80211_FC1_RETRY 0x08
|
|
|
|
|
#define IEEE80211_FC1_PWR_MGT 0x10
|
|
|
|
|
#define IEEE80211_FC1_MORE_DATA 0x20
|
|
|
|
|
#define IEEE80211_FC1_WEP 0x40
|
|
|
|
|
#define IEEE80211_FC1_ORDER 0x80
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_SEQ_FRAG_MASK 0x000f
|
|
|
|
|
#define IEEE80211_SEQ_FRAG_SHIFT 0
|
|
|
|
|
#define IEEE80211_SEQ_SEQ_MASK 0xfff0
|
|
|
|
|
#define IEEE80211_SEQ_SEQ_SHIFT 4
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_NWID_LEN 32
|
|
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
#define IEEE80211_QOS_TXOP 0x00ff
|
|
|
|
|
/* bit 8 is reserved */
|
2005-06-22 10:14:51 +04:00
|
|
|
#define IEEE80211_QOS_ACKPOLICY 0x60
|
|
|
|
|
#define IEEE80211_QOS_ACKPOLICY_S 5
|
|
|
|
|
#define IEEE80211_QOS_ESOP 0x10
|
|
|
|
|
#define IEEE80211_QOS_ESOP_S 4
|
|
|
|
|
#define IEEE80211_QOS_TID 0x0f
|
|
|
|
|
|
|
|
|
|
/* does frame have QoS sequence control data */
|
|
|
|
|
#define IEEE80211_QOS_HAS_SEQ(wh) \
|
|
|
|
|
(((wh)->i_fc[0] & \
|
|
|
|
|
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_QOS)) == \
|
|
|
|
|
(IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
|
2004-05-01 03:51:53 +04:00
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
/*
|
|
|
|
|
* WME/802.11e information element.
|
|
|
|
|
*/
|
2005-06-22 10:14:51 +04:00
|
|
|
struct ieee80211_wme_info {
|
2004-07-23 09:33:23 +04:00
|
|
|
u_int8_t wme_id; /* IEEE80211_ELEMID_VENDOR */
|
|
|
|
|
u_int8_t wme_len; /* length in bytes */
|
|
|
|
|
u_int8_t wme_oui[3]; /* 0x00, 0x50, 0xf2 */
|
|
|
|
|
u_int8_t wme_type; /* OUI type */
|
|
|
|
|
u_int8_t wme_subtype; /* OUI subtype */
|
|
|
|
|
u_int8_t wme_version; /* spec revision */
|
2005-06-22 10:14:51 +04:00
|
|
|
u_int8_t wme_info; /* QoS info */
|
|
|
|
|
} __packed;
|
2004-07-23 09:33:23 +04:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* WME/802.11e Tspec Element
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_wme_tspec {
|
|
|
|
|
u_int8_t ts_id;
|
|
|
|
|
u_int8_t ts_len;
|
|
|
|
|
u_int8_t ts_oui[3];
|
|
|
|
|
u_int8_t ts_oui_type;
|
|
|
|
|
u_int8_t ts_oui_subtype;
|
|
|
|
|
u_int8_t ts_version;
|
|
|
|
|
u_int8_t ts_tsinfo[3];
|
|
|
|
|
u_int8_t ts_nom_msdu[2];
|
|
|
|
|
u_int8_t ts_max_msdu[2];
|
|
|
|
|
u_int8_t ts_min_svc[4];
|
|
|
|
|
u_int8_t ts_max_svc[4];
|
|
|
|
|
u_int8_t ts_inactv_intv[4];
|
|
|
|
|
u_int8_t ts_susp_intv[4];
|
|
|
|
|
u_int8_t ts_start_svc[4];
|
|
|
|
|
u_int8_t ts_min_rate[4];
|
|
|
|
|
u_int8_t ts_mean_rate[4];
|
|
|
|
|
u_int8_t ts_max_burst[4];
|
|
|
|
|
u_int8_t ts_min_phy[4];
|
|
|
|
|
u_int8_t ts_peak_rate[4];
|
|
|
|
|
u_int8_t ts_delay[4];
|
|
|
|
|
u_int8_t ts_surplus[2];
|
|
|
|
|
u_int8_t ts_medium_time[2];
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* WME AC parameter field
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_wme_acparams {
|
|
|
|
|
u_int8_t acp_aci_aifsn;
|
|
|
|
|
u_int8_t acp_logcwminmax;
|
|
|
|
|
u_int16_t acp_txop;
|
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
|
|
#define WME_NUM_AC 4 /* 4 AC categories */
|
|
|
|
|
|
|
|
|
|
#define WME_PARAM_ACI 0x60 /* Mask for ACI field */
|
|
|
|
|
#define WME_PARAM_ACI_S 5 /* Shift for ACI field */
|
|
|
|
|
#define WME_PARAM_ACM 0x10 /* Mask for ACM bit */
|
|
|
|
|
#define WME_PARAM_ACM_S 4 /* Shift for ACM bit */
|
|
|
|
|
#define WME_PARAM_AIFSN 0x0f /* Mask for aifsn field */
|
|
|
|
|
#define WME_PARAM_AIFSN_S 0 /* Shift for aifsn field */
|
|
|
|
|
#define WME_PARAM_LOGCWMIN 0x0f /* Mask for CwMin field (in log) */
|
|
|
|
|
#define WME_PARAM_LOGCWMIN_S 0 /* Shift for CwMin field */
|
|
|
|
|
#define WME_PARAM_LOGCWMAX 0xf0 /* Mask for CwMax field (in log) */
|
|
|
|
|
#define WME_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */
|
|
|
|
|
|
|
|
|
|
#define WME_AC_TO_TID(_ac) ( \
|
|
|
|
|
((_ac) == WME_AC_VO) ? 6 : \
|
|
|
|
|
((_ac) == WME_AC_VI) ? 5 : \
|
|
|
|
|
((_ac) == WME_AC_BK) ? 1 : \
|
|
|
|
|
0)
|
|
|
|
|
|
|
|
|
|
#define TID_TO_WME_AC(_tid) ( \
|
|
|
|
|
((_tid) < 1) ? WME_AC_BE : \
|
|
|
|
|
((_tid) < 3) ? WME_AC_BK : \
|
|
|
|
|
((_tid) < 6) ? WME_AC_VI : \
|
|
|
|
|
WME_AC_VO)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* WME Parameter Element
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_wme_param {
|
|
|
|
|
u_int8_t param_id;
|
|
|
|
|
u_int8_t param_len;
|
|
|
|
|
u_int8_t param_oui[3];
|
|
|
|
|
u_int8_t param_oui_type;
|
|
|
|
|
u_int8_t param_oui_sybtype;
|
|
|
|
|
u_int8_t param_version;
|
|
|
|
|
u_int8_t param_qosInfo;
|
|
|
|
|
#define WME_QOSINFO_COUNT 0x0f /* Mask for param count field */
|
|
|
|
|
u_int8_t param_reserved;
|
|
|
|
|
struct ieee80211_wme_acparams params_acParams[WME_NUM_AC];
|
|
|
|
|
} __packed;
|
2004-07-23 09:33:23 +04:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Management Notification Frame
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_mnf {
|
|
|
|
|
u_int8_t mnf_category;
|
|
|
|
|
u_int8_t mnf_action;
|
|
|
|
|
u_int8_t mnf_dialog;
|
|
|
|
|
u_int8_t mnf_status;
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2004-07-23 09:33:23 +04:00
|
|
|
#define MNF_SETUP_REQ 0
|
|
|
|
|
#define MNF_SETUP_RESP 1
|
|
|
|
|
#define MNF_TEARDOWN 2
|
|
|
|
|
|
2003-12-14 12:56:53 +03:00
|
|
|
/*
|
|
|
|
|
* Control frames.
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_frame_min {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_addr1[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_addr2[IEEE80211_ADDR_LEN];
|
|
|
|
|
/* FCS */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-12-14 12:56:53 +03:00
|
|
|
|
|
|
|
|
struct ieee80211_frame_rts {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_ra[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_ta[IEEE80211_ADDR_LEN];
|
|
|
|
|
/* FCS */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-12-14 12:56:53 +03:00
|
|
|
|
|
|
|
|
struct ieee80211_frame_cts {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_ra[IEEE80211_ADDR_LEN];
|
|
|
|
|
/* FCS */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-12-14 12:56:53 +03:00
|
|
|
|
|
|
|
|
struct ieee80211_frame_ack {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2];
|
|
|
|
|
u_int8_t i_ra[IEEE80211_ADDR_LEN];
|
|
|
|
|
/* FCS */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-12-14 12:56:53 +03:00
|
|
|
|
|
|
|
|
struct ieee80211_frame_pspoll {
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_aid[2];
|
|
|
|
|
u_int8_t i_bssid[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_ta[IEEE80211_ADDR_LEN];
|
|
|
|
|
/* FCS */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-12-14 12:56:53 +03:00
|
|
|
|
|
|
|
|
struct ieee80211_frame_cfend { /* NB: also CF-End+CF-Ack */
|
|
|
|
|
u_int8_t i_fc[2];
|
|
|
|
|
u_int8_t i_dur[2]; /* should be zero */
|
|
|
|
|
u_int8_t i_ra[IEEE80211_ADDR_LEN];
|
|
|
|
|
u_int8_t i_bssid[IEEE80211_ADDR_LEN];
|
|
|
|
|
/* FCS */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2003-12-14 12:56:53 +03:00
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
/*
|
|
|
|
|
* BEACON management packets
|
|
|
|
|
*
|
|
|
|
|
* octet timestamp[8]
|
|
|
|
|
* octet beacon interval[2]
|
|
|
|
|
* octet capability information[2]
|
|
|
|
|
* information element
|
|
|
|
|
* octet elemid
|
|
|
|
|
* octet length
|
|
|
|
|
* octet information[length]
|
|
|
|
|
*/
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
typedef u_int8_t *ieee80211_mgt_beacon_t;
|
2003-08-31 01:26:03 +04:00
|
|
|
|
|
|
|
|
#define IEEE80211_BEACON_INTERVAL(beacon) \
|
|
|
|
|
((beacon)[8] | ((beacon)[9] << 8))
|
|
|
|
|
#define IEEE80211_BEACON_CAPABILITY(beacon) \
|
|
|
|
|
((beacon)[10] | ((beacon)[11] << 8))
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_CAPINFO_ESS 0x0001
|
|
|
|
|
#define IEEE80211_CAPINFO_IBSS 0x0002
|
|
|
|
|
#define IEEE80211_CAPINFO_CF_POLLABLE 0x0004
|
|
|
|
|
#define IEEE80211_CAPINFO_CF_POLLREQ 0x0008
|
|
|
|
|
#define IEEE80211_CAPINFO_PRIVACY 0x0010
|
|
|
|
|
#define IEEE80211_CAPINFO_SHORT_PREAMBLE 0x0020
|
|
|
|
|
#define IEEE80211_CAPINFO_PBCC 0x0040
|
|
|
|
|
#define IEEE80211_CAPINFO_CHNL_AGILITY 0x0080
|
|
|
|
|
/* bits 8-9 are reserved */
|
|
|
|
|
#define IEEE80211_CAPINFO_SHORT_SLOTTIME 0x0400
|
2004-05-01 03:51:53 +04:00
|
|
|
#define IEEE80211_CAPINFO_RSN 0x0800
|
|
|
|
|
/* bit 12 is reserved */
|
2003-08-31 01:26:03 +04:00
|
|
|
#define IEEE80211_CAPINFO_DSSSOFDM 0x2000
|
|
|
|
|
/* bits 14-15 are reserved */
|
|
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
/*
|
|
|
|
|
* 802.11i/WPA information element (maximally sized).
|
|
|
|
|
*/
|
|
|
|
|
struct ieee80211_ie_wpa {
|
2004-07-23 09:33:23 +04:00
|
|
|
u_int8_t wpa_id; /* IEEE80211_ELEMID_VENDOR */
|
|
|
|
|
u_int8_t wpa_len; /* length in bytes */
|
2004-05-01 03:51:53 +04:00
|
|
|
u_int8_t wpa_oui[3]; /* 0x00, 0x50, 0xf2 */
|
|
|
|
|
u_int8_t wpa_type; /* OUI type */
|
|
|
|
|
u_int16_t wpa_version; /* spec revision */
|
|
|
|
|
u_int32_t wpa_mcipher[1]; /* multicast/group key cipher */
|
|
|
|
|
u_int16_t wpa_uciphercnt; /* # pairwise key ciphers */
|
|
|
|
|
u_int32_t wpa_uciphers[8];/* ciphers */
|
|
|
|
|
u_int16_t wpa_authselcnt; /* authentication selector cnt*/
|
|
|
|
|
u_int32_t wpa_authsels[8];/* selectors */
|
2004-07-23 09:33:23 +04:00
|
|
|
u_int16_t wpa_caps; /* 802.11i capabilities */
|
|
|
|
|
u_int16_t wpa_pmkidcnt; /* 802.11i pmkid count */
|
|
|
|
|
u_int16_t wpa_pmkids[8]; /* 802.11i pmkids */
|
2005-06-22 10:14:51 +04:00
|
|
|
} __packed;
|
2004-05-01 03:51:53 +04:00
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
/*
|
2005-06-22 10:14:51 +04:00
|
|
|
* Management information element payloads.
|
2003-08-31 01:26:03 +04:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
enum {
|
2004-07-23 09:33:23 +04:00
|
|
|
IEEE80211_ELEMID_SSID = 0,
|
|
|
|
|
IEEE80211_ELEMID_RATES = 1,
|
|
|
|
|
IEEE80211_ELEMID_FHPARMS = 2,
|
|
|
|
|
IEEE80211_ELEMID_DSPARMS = 3,
|
|
|
|
|
IEEE80211_ELEMID_CFPARMS = 4,
|
|
|
|
|
IEEE80211_ELEMID_TIM = 5,
|
|
|
|
|
IEEE80211_ELEMID_IBSSPARMS = 6,
|
|
|
|
|
IEEE80211_ELEMID_COUNTRY = 7,
|
|
|
|
|
IEEE80211_ELEMID_CHALLENGE = 16,
|
2004-05-01 03:51:53 +04:00
|
|
|
/* 17-31 reserved for challenge text extension */
|
2004-07-23 09:33:23 +04:00
|
|
|
IEEE80211_ELEMID_ERP = 42,
|
|
|
|
|
IEEE80211_ELEMID_RSN = 48,
|
|
|
|
|
IEEE80211_ELEMID_XRATES = 50,
|
|
|
|
|
IEEE80211_ELEMID_TPC = 150,
|
|
|
|
|
IEEE80211_ELEMID_CCKM = 156,
|
|
|
|
|
IEEE80211_ELEMID_VENDOR = 221, /* vendor private */
|
2003-08-31 01:26:03 +04:00
|
|
|
};
|
|
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
struct ieee80211_tim_ie {
|
|
|
|
|
u_int8_t tim_ie; /* IEEE80211_ELEMID_TIM */
|
|
|
|
|
u_int8_t tim_len;
|
|
|
|
|
u_int8_t tim_count; /* DTIM count */
|
|
|
|
|
u_int8_t tim_period; /* DTIM period */
|
|
|
|
|
u_int8_t tim_bitctl; /* bitmap control */
|
|
|
|
|
u_int8_t tim_bitmap[1]; /* variable-length bitmap */
|
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
|
|
struct ieee80211_country_ie {
|
|
|
|
|
u_int8_t ie; /* IEEE80211_ELEMID_COUNTRY */
|
|
|
|
|
u_int8_t len;
|
|
|
|
|
u_int8_t cc[3]; /* ISO CC+(I)ndoor/(O)utdoor */
|
|
|
|
|
struct {
|
|
|
|
|
u_int8_t schan; /* starting channel */
|
|
|
|
|
u_int8_t nchan; /* number channels */
|
|
|
|
|
u_int8_t maxtxpwr; /* tx power cap */
|
|
|
|
|
} band[4] __packed; /* up to 4 sub bands */
|
|
|
|
|
} __packed;
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_CHALLENGE_LEN 128
|
2003-10-15 15:43:51 +04:00
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_RATE_BASIC 0x80
|
|
|
|
|
#define IEEE80211_RATE_VAL 0x7f
|
2003-08-31 01:26:03 +04:00
|
|
|
|
|
|
|
|
/* EPR information element flags */
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_ERP_NON_ERP_PRESENT 0x01
|
|
|
|
|
#define IEEE80211_ERP_USE_PROTECTION 0x02
|
|
|
|
|
#define IEEE80211_ERP_LONG_PREAMBLE 0x04
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
/* Atheros private advanced capabilities info */
|
2004-07-23 09:33:23 +04:00
|
|
|
#define ATHEROS_CAP_TURBO_PRIME 0x01
|
|
|
|
|
#define ATHEROS_CAP_COMPRESSION 0x02
|
|
|
|
|
#define ATHEROS_CAP_FAST_FRAME 0x04
|
2004-05-01 03:51:53 +04:00
|
|
|
/* bits 3-6 reserved */
|
2004-07-23 09:33:23 +04:00
|
|
|
#define ATHEROS_CAP_BOOST 0x80
|
2004-05-01 03:51:53 +04:00
|
|
|
|
|
|
|
|
#define ATH_OUI 0x7f0300 /* Atheros OUI */
|
|
|
|
|
#define ATH_OUI_TYPE 0x01
|
|
|
|
|
#define ATH_OUI_VERSION 0x01
|
|
|
|
|
|
|
|
|
|
#define WPA_OUI 0xf25000
|
|
|
|
|
#define WPA_OUI_TYPE 0x01
|
2004-07-23 09:33:23 +04:00
|
|
|
#define WPA_VERSION 1 /* current supported version */
|
2004-05-01 03:51:53 +04:00
|
|
|
|
|
|
|
|
#define WPA_CSE_NULL 0x00
|
|
|
|
|
#define WPA_CSE_WEP40 0x01
|
|
|
|
|
#define WPA_CSE_TKIP 0x02
|
|
|
|
|
#define WPA_CSE_CCMP 0x04
|
|
|
|
|
#define WPA_CSE_WEP104 0x05
|
|
|
|
|
|
|
|
|
|
#define WPA_ASE_NONE 0x00
|
|
|
|
|
#define WPA_ASE_8021X_UNSPEC 0x01
|
|
|
|
|
#define WPA_ASE_8021X_PSK 0x02
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define RSN_OUI 0xac0f00
|
|
|
|
|
#define RSN_VERSION 1 /* current supported version */
|
|
|
|
|
|
|
|
|
|
#define RSN_CSE_NULL 0x00
|
|
|
|
|
#define RSN_CSE_WEP40 0x01
|
|
|
|
|
#define RSN_CSE_TKIP 0x02
|
|
|
|
|
#define RSN_CSE_WRAP 0x03
|
|
|
|
|
#define RSN_CSE_CCMP 0x04
|
|
|
|
|
#define RSN_CSE_WEP104 0x05
|
|
|
|
|
|
|
|
|
|
#define RSN_ASE_NONE 0x00
|
|
|
|
|
#define RSN_ASE_8021X_UNSPEC 0x01
|
|
|
|
|
#define RSN_ASE_8021X_PSK 0x02
|
|
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
#define RSN_CAP_PREAUTH 0x01
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define WME_OUI 0xf25000
|
|
|
|
|
#define WME_OUI_TYPE 0x02
|
2005-06-22 10:14:51 +04:00
|
|
|
#define WME_INFO_OUI_SUBTYPE 0x00
|
|
|
|
|
#define WME_PARAM_OUI_SUBTYPE 0x01
|
2004-07-23 09:33:23 +04:00
|
|
|
#define WME_VERSION 1
|
|
|
|
|
|
|
|
|
|
/* WME stream classes */
|
|
|
|
|
#define WME_AC_BE 0 /* best effort */
|
|
|
|
|
#define WME_AC_BK 1 /* background */
|
|
|
|
|
#define WME_AC_VI 2 /* video */
|
|
|
|
|
#define WME_AC_VO 3 /* voice */
|
|
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
/*
|
|
|
|
|
* AUTH management packets
|
|
|
|
|
*
|
|
|
|
|
* octet algo[2]
|
|
|
|
|
* octet seq[2]
|
|
|
|
|
* octet status[2]
|
|
|
|
|
* octet chal.id
|
|
|
|
|
* octet chal.length
|
|
|
|
|
* octet chal.text[253]
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
typedef u_int8_t *ieee80211_mgt_auth_t;
|
|
|
|
|
|
|
|
|
|
#define IEEE80211_AUTH_ALGORITHM(auth) \
|
|
|
|
|
((auth)[0] | ((auth)[1] << 8))
|
|
|
|
|
#define IEEE80211_AUTH_TRANSACTION(auth) \
|
|
|
|
|
((auth)[2] | ((auth)[3] << 8))
|
|
|
|
|
#define IEEE80211_AUTH_STATUS(auth) \
|
|
|
|
|
((auth)[4] | ((auth)[5] << 8))
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_AUTH_ALG_OPEN 0x0000
|
|
|
|
|
#define IEEE80211_AUTH_ALG_SHARED 0x0001
|
|
|
|
|
#define IEEE80211_AUTH_ALG_LEAP 0x0080
|
2003-08-31 01:26:03 +04:00
|
|
|
|
|
|
|
|
enum {
|
|
|
|
|
IEEE80211_AUTH_OPEN_REQUEST = 1,
|
|
|
|
|
IEEE80211_AUTH_OPEN_RESPONSE = 2,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum {
|
|
|
|
|
IEEE80211_AUTH_SHARED_REQUEST = 1,
|
|
|
|
|
IEEE80211_AUTH_SHARED_CHALLENGE = 2,
|
|
|
|
|
IEEE80211_AUTH_SHARED_RESPONSE = 3,
|
|
|
|
|
IEEE80211_AUTH_SHARED_PASS = 4,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Reason codes
|
|
|
|
|
*
|
|
|
|
|
* Unlisted codes are reserved
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
enum {
|
|
|
|
|
IEEE80211_REASON_UNSPECIFIED = 1,
|
|
|
|
|
IEEE80211_REASON_AUTH_EXPIRE = 2,
|
|
|
|
|
IEEE80211_REASON_AUTH_LEAVE = 3,
|
|
|
|
|
IEEE80211_REASON_ASSOC_EXPIRE = 4,
|
|
|
|
|
IEEE80211_REASON_ASSOC_TOOMANY = 5,
|
|
|
|
|
IEEE80211_REASON_NOT_AUTHED = 6,
|
|
|
|
|
IEEE80211_REASON_NOT_ASSOCED = 7,
|
|
|
|
|
IEEE80211_REASON_ASSOC_LEAVE = 8,
|
|
|
|
|
IEEE80211_REASON_ASSOC_NOT_AUTHED = 9,
|
|
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
IEEE80211_REASON_RSN_REQUIRED = 11,
|
|
|
|
|
IEEE80211_REASON_RSN_INCONSISTENT = 12,
|
|
|
|
|
IEEE80211_REASON_IE_INVALID = 13,
|
|
|
|
|
IEEE80211_REASON_MIC_FAILURE = 14,
|
|
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
IEEE80211_STATUS_SUCCESS = 0,
|
|
|
|
|
IEEE80211_STATUS_UNSPECIFIED = 1,
|
|
|
|
|
IEEE80211_STATUS_CAPINFO = 10,
|
|
|
|
|
IEEE80211_STATUS_NOT_ASSOCED = 11,
|
|
|
|
|
IEEE80211_STATUS_OTHER = 12,
|
|
|
|
|
IEEE80211_STATUS_ALG = 13,
|
|
|
|
|
IEEE80211_STATUS_SEQUENCE = 14,
|
|
|
|
|
IEEE80211_STATUS_CHALLENGE = 15,
|
|
|
|
|
IEEE80211_STATUS_TIMEOUT = 16,
|
|
|
|
|
IEEE80211_STATUS_TOOMANY = 17,
|
|
|
|
|
IEEE80211_STATUS_BASIC_RATE = 18,
|
|
|
|
|
IEEE80211_STATUS_SP_REQUIRED = 19,
|
|
|
|
|
IEEE80211_STATUS_PBCC_REQUIRED = 20,
|
|
|
|
|
IEEE80211_STATUS_CA_REQUIRED = 21,
|
|
|
|
|
IEEE80211_STATUS_TOO_MANY_STATIONS = 22,
|
|
|
|
|
IEEE80211_STATUS_RATES = 23,
|
|
|
|
|
IEEE80211_STATUS_SHORTSLOT_REQUIRED = 25,
|
|
|
|
|
IEEE80211_STATUS_DSSSOFDM_REQUIRED = 26,
|
|
|
|
|
};
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_WEP_KEYLEN 5 /* 40bit */
|
|
|
|
|
#define IEEE80211_WEP_IVLEN 3 /* 24bit */
|
|
|
|
|
#define IEEE80211_WEP_KIDLEN 1 /* 1 octet */
|
|
|
|
|
#define IEEE80211_WEP_CRCLEN 4 /* CRC-32 */
|
2004-12-19 11:08:06 +03:00
|
|
|
#define IEEE80211_WEP_TOTLEN (IEEE80211_WEP_IVLEN + \
|
|
|
|
|
IEEE80211_WEP_KIDLEN + \
|
|
|
|
|
IEEE80211_WEP_CRCLEN)
|
2005-06-22 10:14:51 +04:00
|
|
|
#define IEEE80211_WEP_NKID 4 /* number of key ids */
|
|
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
/*
|
|
|
|
|
* 802.11i defines an extended IV for use with non-WEP ciphers.
|
|
|
|
|
* When the EXTIV bit is set in the key id byte an additional
|
|
|
|
|
* 4 bytes immediately follow the IV for TKIP. For CCMP the
|
|
|
|
|
* EXTIV bit is likewise set but the 8 bytes represent the
|
|
|
|
|
* CCMP header rather than IV+extended-IV.
|
|
|
|
|
*/
|
|
|
|
|
#define IEEE80211_WEP_EXTIV 0x20
|
|
|
|
|
#define IEEE80211_WEP_EXTIVLEN 4 /* extended IV length */
|
|
|
|
|
#define IEEE80211_WEP_MICLEN 8 /* trailing MIC */
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_CRC_LEN 4
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-05-01 03:51:53 +04:00
|
|
|
/*
|
|
|
|
|
* Maximum acceptable MTU is:
|
|
|
|
|
* IEEE80211_MAX_LEN - WEP overhead - CRC -
|
|
|
|
|
* QoS overhead - RSN/WPA overhead
|
|
|
|
|
* Min is arbitrarily chosen > IEEE80211_MIN_LEN. The default
|
|
|
|
|
* mtu is Ethernet-compatible; it's set by ether_ifattach.
|
|
|
|
|
*/
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_MTU_MAX 2290
|
|
|
|
|
#define IEEE80211_MTU_MIN 32
|
2004-05-01 03:51:53 +04:00
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \
|
2003-08-31 01:26:03 +04:00
|
|
|
(IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN))
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_ACK_LEN \
|
|
|
|
|
(sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN)
|
2003-12-14 12:56:53 +03:00
|
|
|
#define IEEE80211_MIN_LEN \
|
|
|
|
|
(sizeof(struct ieee80211_frame_min) + IEEE80211_CRC_LEN)
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
/*
|
|
|
|
|
* The 802.11 spec says at most 2007 stations may be
|
|
|
|
|
* associated at once. For most AP's this is way more
|
|
|
|
|
* than is feasible so we use a default of 128. This
|
|
|
|
|
* number may be overridden by the driver and/or by
|
|
|
|
|
* user configuration.
|
|
|
|
|
*/
|
|
|
|
|
#define IEEE80211_AID_MAX 2007
|
|
|
|
|
#define IEEE80211_AID_DEF 128
|
2003-10-13 08:28:35 +04:00
|
|
|
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_AID(b) ((b) &~ 0xc000)
|
2003-10-13 08:28:35 +04:00
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
/*
|
2003-08-31 01:26:03 +04:00
|
|
|
* RTS frame length parameters. The default is specified in
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
* the 802.11 spec as 512; we treat it as implementation-dependent
|
|
|
|
|
* so it's defined in ieee80211_var.h. The max may be wrong
|
|
|
|
|
* for jumbo frames.
|
2003-08-31 01:26:03 +04:00
|
|
|
*/
|
2004-07-23 09:33:23 +04:00
|
|
|
#define IEEE80211_RTS_MIN 1
|
Resolve conflicts and adapt to NetBSD.
Thanks to dyoung@, scw@, and perry@ for help testing.
2005-08-30 15:27 avatar
Properly set ic_curchan before calling back to device driver to do channel
switching(ifconfig devX channel Y). This fix should make channel changing
works again in monitor mode.
Submitted by: sam
X-MFC-With: other ic_curchan changes
2005-08-13 18:50 sam
revert 1.64: we cannot use the channel characteristics to decide when to
do 11g erp sta accounting because b/g channels show up as false positives
when operating in 11b.
Noticed by: Michal Mertl
2005-08-13 18:31 sam
Extend acl support to pass ioctl requests through and use this to
add support for getting the current policy setting and collecting
the list of mac addresses in the acl table.
Submitted by: Michal Mertl (original version)
MFC after: 2 weeks
2005-08-10 18:42 sam
Don't use ic_curmode to decide when to do 11g station accounting,
use the station channel properties. Fixes assert failure/bogus
operation when an ap is operating in 11a and has associated stations
then switches to 11g.
Noticed by: Michal Mertl
Reviewed by: avatar
MFC after: 2 weeks
2005-08-10 17:22 sam
Clarify/fix handling of the current channel:
o add ic_curchan and use it uniformly for specifying the current
channel instead of overloading ic->ic_bss->ni_chan (or in some
drivers ic_ibss_chan)
o add ieee80211_scanparams structure to encapsulate scanning-related
state captured for rx frames
o move rx beacon+probe response frame handling into separate routines
o change beacon+probe response handling to treat the scan table
more like a scan cache--look for an existing entry before adding
a new one; this combined with ic_curchan use corrects handling of
stations that were previously found at a different channel
o move adhoc neighbor discovery by beacon+probe response frames to
a new ieee80211_add_neighbor routine
Reviewed by: avatar
Tested by: avatar, Michal Mertl
MFC after: 2 weeks
2005-08-09 11:19 rwatson
Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags. Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags. This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.
Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.
Reviewed by: pjd, bz
MFC after: 7 days
2005-08-08 19:46 sam
Split crypto tx+rx key indices and add a key index -> node mapping table:
Crypto changes:
o change driver/net80211 key_alloc api to return tx+rx key indices; a
driver can leave the rx key index set to IEEE80211_KEYIX_NONE or set
it to be the same as the tx key index (the former disables use of
the key index in building the keyix->node mapping table and is the
default setup for naive drivers by null_key_alloc)
o add cs_max_keyid to crypto state to specify the max h/w key index a
driver will return; this is used to allocate the key index mapping
table and to bounds check table loookups
o while here introduce ieee80211_keyix (finally) for the type of a h/w
key index
o change crypto notifiers for rx failures to pass the rx key index up
as appropriate (michael failure, replay, etc.)
Node table changes:
o optionally allocate a h/w key index to node mapping table for the
station table using the max key index setting supplied by drivers
(note the scan table does not get a map)
o defer node table allocation to lateattach so the driver has a chance
to set the max key id to size the key index map
o while here also defer the aid bitmap allocation
o add new ieee80211_find_rxnode_withkey api to find a sta/node entry
on frame receive with an optional h/w key index to use in checking
mapping table; also updates the map if it does a hash lookup and the
found node has a rx key index set in the unicast key; note this work
is separated from the old ieee80211_find_rxnode call so drivers do
not need to be aware of the new mechanism
o move some node table manipulation under the node table lock to close
a race on node delete
o add ieee80211_node_delucastkey to do the dirty work of deleting
unicast key state for a node (deletes any key and handles key map
references)
Ath driver:
o nuke private sc_keyixmap mechansim in favor of net80211 support
o update key alloc api
These changes close several race conditions for the ath driver operating
in ap mode. Other drivers should see no change. Station mode operation
for ath no longer uses the key index map but performance tests show no
noticeable change and this will be fixed when the scan table is eliminated
with the new scanning support.
Tested by: Michal Mertl, avatar, others
Reviewed by: avatar, others
MFC after: 2 weeks
2005-08-08 06:49 sam
use ieee80211_iterate_nodes to retrieve station data; the previous
code walked the list w/o locking
MFC after: 1 week
2005-08-08 04:30 sam
Cleanup beacon/listen interval handling:
o separate configured beacon interval from listen interval; this
avoids potential use of one value for the other (e.g. setting
powersavesleep to 0 clobbers the beacon interval used in hostap
or ibss mode)
o bounds check the beacon interval received in probe response and
beacon frames and drop frames with bogus settings; not clear
if we should instead clamp the value as any alteration would
result in mismatched sta+ap configuration and probably be more
confusing (don't want to log to the console but perhaps ok with
rate limiting)
o while here up max beacon interval to reflect WiFi standard
Noticed by: Martin <nakal@nurfuerspam.de>
MFC after: 1 week
2005-08-06 05:57 sam
fix debug msg typo
MFC after: 3 days
2005-08-06 05:56 sam
Fix handling of frames sent prior to a station being authorized
when operating in ap mode. Previously we allocated a node from the
station table, sent the frame (using the node), then released the
reference that "held the frame in the table". But while the frame
was in flight the node might be reclaimed which could lead to
problems. The solution is to add an ieee80211_tmp_node routine
that crafts a node that does exist in a table and so isn't ever
reclaimed; it exists only so long as the associated frame is in flight.
MFC after: 5 days
2005-07-31 07:12 sam
close a race between reclaiming a node when a station is inactive
and sending the null data frame used to probe inactive stations
MFC after: 5 days
2005-07-27 05:41 sam
when bridging internally bypass the bss node as traffic to it
must follow the normal input path
Submitted by: Michal Mertl
MFC after: 5 days
2005-07-27 03:53 sam
bandaid ni_fails handling so ap's with association failures are
reconsidered after a bit; a proper fix involves more changes to
the scanning infrastructure
Reviewed by: avatar, David Young
MFC after: 5 days
2005-07-23 01:16 sam
the AREF flag is only meaningful in ap mode; adhoc neighbors now
are timed out of the sta/neighbor table
2005-07-23 00:25 sam
o move inactivity-related debug msgs under IEEE80211_MSG_INACT
o probe inactive neighbors in adhoc mode (they don't have an
association id so previously were being timed out)
MFC after: 3 days
2005-07-22 22:11 sam
split xmit of probe request frame out into a separate routine that
takes explicit parameters; this will be needed when scanning is
decoupled from the state machine to do bg scanning
MFC after: 3 days
2005-07-22 21:48 sam
split 802.11 frame xmit setup code into ieee80211_send_setup
MFC after: 3 days
2005-07-22 18:57 sam
simplify ic_newassoc callback
MFC after: 3 days
2005-07-22 18:54 sam
simplify ieee80211_ibss_merge api
MFC after: 3 days
2005-07-22 18:50 sam
add stats we know we'll need soon and some spare fields for future expansion
MFC after: 3 days
2005-07-22 18:45 sam
simplify tim callback api
MFC after: 3 days
2005-07-22 18:42 sam
don't include 802.3 header in min frame length calculation as it may
not be present for a frag; fixes problem with small (fragmented) frames
being dropped
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:36 sam
simplify ieee80211_node_authorize and ieee80211_node_unauthorize api's
MFC after: 3 days
2005-07-22 18:31 sam
simplifiy ieee80211_send_nulldata api
MFC after: 3 days
2005-07-22 18:29 sam
simplify rate set api's by removing ic parameter (implicit in node reference)
MFC after: 3 days
2005-07-22 18:21 sam
reject association requests with a wpa/rsn ie when wpa/rsn is not
configured on the ap; previously we either ignored the ie or (possibly)
failed an assertion
Obtained from: Atheros
MFC after: 3 days
2005-07-22 18:16 sam
missed one in last commit; add device name to discard msgs
2005-07-22 18:13 sam
include device name in discard msgs
2005-07-22 18:12 sam
add diag msgs for frames discarded because the direction field is wrong
2005-07-22 18:08 sam
split data frame delivery out to a new function ieee80211_deliver_data
2005-07-22 18:00 sam
o add IEEE80211_IOC_FRAGTHRESHOLD for getting+setting the
tx fragmentation threshold
o fix bounds checking on IEEE80211_IOC_RTSTHRESHOLD
MFC after: 3 days
2005-07-22 17:55 sam
o add IEEE80211_FRAG_DEFAULT
o move default settings for RTS and frag thresholds to ieee80211_var.h
2005-07-22 17:50 sam
diff reduction against p4: define IEEE80211_FIXED_RATE_NONE and use
it instead of -1
2005-07-22 17:37 sam
add flags missed in last merge
2005-07-22 17:36 sam
Diff reduction against p4:
o add ic_flags_ext for eventual extention of ic_flags
o define/reserve flag+capabilities bits for superg,
bg scan, and roaming support
o refactor debug msg macros
MFC after: 3 days
2005-07-22 06:17 sam
send a response when an auth request is denied due to an acl;
might be better to silently ignore the frame but this way we
give stations a chance of figuring out what's wrong
2005-07-22 06:15 sam
remove excess whitespace
2005-07-22 05:55 sam
use IF_HANDOFF when bridging frames internally so if_start gets
called; fixes communication between associated sta's
MFC after: 3 days
2005-07-11 04:06 sam
Handle encrypt of arbitarily fragmented mbuf chains: previously
we bailed if we couldn't collect the 16-bytes of data required
for an aes block cipher in 2 mbufs; now we deal with it. While
here make space accounting signed so a sanity check does the
right thing for malformed mbuf chains.
Approved by: re (scottl)
2005-07-11 04:00 sam
nuke assert that duplicates real check
Reviewed by: avatar
Approved by: re (scottl)
2005-11-18 19:40:08 +03:00
|
|
|
#define IEEE80211_RTS_MAX 2346
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* TX fragmentation parameters. As above for RTS, we treat
|
|
|
|
|
* default as implementation-dependent so define it elsewhere.
|
|
|
|
|
*/
|
|
|
|
|
#define IEEE80211_FRAG_MIN 256
|
|
|
|
|
#define IEEE80211_FRAG_MAX 2346
|
2003-08-31 01:26:03 +04:00
|
|
|
|
2004-12-19 11:08:06 +03:00
|
|
|
/*
|
|
|
|
|
* 802.11 frame duration definitions.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
struct ieee80211_duration {
|
|
|
|
|
uint16_t d_rts_dur;
|
|
|
|
|
uint16_t d_data_dur;
|
|
|
|
|
uint16_t d_plcp_len;
|
2004-12-27 04:51:49 +03:00
|
|
|
uint8_t d_residue; /* unused octets in time slot */
|
2004-12-19 11:08:06 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* One Time Unit (TU) is 1Kus = 1024 microseconds. */
|
|
|
|
|
#define IEEE80211_DUR_TU 1024
|
|
|
|
|
|
|
|
|
|
/* IEEE 802.11b durations for DSSS PHY in microseconds */
|
|
|
|
|
#define IEEE80211_DUR_DS_LONG_PREAMBLE 144
|
|
|
|
|
#define IEEE80211_DUR_DS_SHORT_PREAMBLE 72
|
2004-12-27 08:36:08 +03:00
|
|
|
|
2004-12-19 11:08:06 +03:00
|
|
|
#define IEEE80211_DUR_DS_SLOW_PLCPHDR 48
|
2004-12-27 08:36:08 +03:00
|
|
|
#define IEEE80211_DUR_DS_FAST_PLCPHDR 24
|
2004-12-19 11:08:06 +03:00
|
|
|
#define IEEE80211_DUR_DS_SLOW_ACK 112
|
|
|
|
|
#define IEEE80211_DUR_DS_FAST_ACK 56
|
|
|
|
|
#define IEEE80211_DUR_DS_SLOW_CTS 112
|
|
|
|
|
#define IEEE80211_DUR_DS_FAST_CTS 56
|
2004-12-27 08:36:08 +03:00
|
|
|
|
2004-12-19 11:08:06 +03:00
|
|
|
#define IEEE80211_DUR_DS_SLOT 20
|
|
|
|
|
#define IEEE80211_DUR_DS_SIFS 10
|
|
|
|
|
#define IEEE80211_DUR_DS_PIFS (IEEE80211_DUR_DS_SIFS + IEEE80211_DUR_DS_SLOT)
|
|
|
|
|
#define IEEE80211_DUR_DS_DIFS (IEEE80211_DUR_DS_SIFS + \
|
|
|
|
|
2 * IEEE80211_DUR_DS_SLOT)
|
|
|
|
|
#define IEEE80211_DUR_DS_EIFS (IEEE80211_DUR_DS_SIFS + \
|
|
|
|
|
IEEE80211_DUR_DS_SLOW_ACK + \
|
|
|
|
|
IEEE80211_DUR_DS_LONG_PREAMBLE + \
|
|
|
|
|
IEEE80211_DUR_DS_SLOW_PLCPHDR + \
|
|
|
|
|
IEEE80211_DUR_DIFS)
|
|
|
|
|
|
2003-08-31 01:26:03 +04:00
|
|
|
|
|
|
|
|
#endif /* _NET80211_IEEE80211_H_ */
|