Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
549c8ffd36
NetBSD/sys/dev/ieee1394/files.ieee1394

20 lines
407 B
Plaintext
Raw Normal View History

First pass (checkpoint checkin) for firewire scsi code. There are a number of issues here for anyone trying to use this today: 1. On my test drive the command engine on the drive seems to stall after the inquire is done. So the mode sense times out for a long time before aborting. This obviously needs to be tracked down and fixed. However it does do a proper inquire: scsibus0 at sbpscsi0: 1 target, 1 lun per target sd0 at scsibus0 target 0 lun 0: <Maxtor, 1394 storage, 60> disk fixed 2. This code is quite ugly in places as debug code was added to test things. Definitly needs cleanup/documention in places where it's using command structures. The structure for alloc'ing orbs, running them through the command engine and getting state back is mostly set but implementation needs an overhaul in places. 3. For testing I use the following config options: fwohci* at cardbus? dev ? function ? # IEEE1394 Controller fw* at fwbus? options FW_DEBUG options FWNODE_DEBUG options P1212_DEBUG options SBP2_DEBUG options SBPSCSI_DEBUG fwnode* at fwbus? sbpscsi* at fwnode? scsibus* at sbpscsi?
2002-11-22 19:28:54 +03:00
# $NetBSD: files.ieee1394,v 1.7 2002/11/22 16:28:55 jmc Exp $
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
Add locators support
2001-05-13 09:01:42 +04:00
file dev/ieee1394/fwlynx.c fwlynx
file dev/ieee1394/fwohci.c fwohci
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
Add locators support
2001-05-13 09:01:42 +04:00
device fwnode { }
Rototill fwnode.c to rely on the p1212 routines to parse and validate the ROM
2002-02-27 08:02:25 +03:00
attach fwnode at fwbus: ieee1212
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-15 02:37:20 +03:00
Put in the structure for fwnode/fwscsi
2001-05-01 08:48:10 +04:00
file dev/ieee1394/fwnode.c fwnode
First Prototype implementation of network interface part for IEEE1394 (if_fw). Current status: Only OHCI chip is supported (fwohci). ping (IPv4) works with Sony's implementation (SmartConnect) on Win98. sometimes works but not stable. Not implemented yet: IRM (Isochronous Resource Manager) functionality. Link layer fragmentation. Topology map. More to do: clean ups MCAP charactor device part dhcp There is no entry in GENERIC config file yet. Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 20:17:12 +03:00
First pass (checkpoint checkin) for firewire scsi code. There are a number of issues here for anyone trying to use this today: 1. On my test drive the command engine on the drive seems to stall after the inquire is done. So the mode sense times out for a long time before aborting. This obviously needs to be tracked down and fixed. However it does do a proper inquire: scsibus0 at sbpscsi0: 1 target, 1 lun per target sd0 at scsibus0 target 0 lun 0: <Maxtor, 1394 storage, 60> disk fixed 2. This code is quite ugly in places as debug code was added to test things. Definitly needs cleanup/documention in places where it's using command structures. The structure for alloc'ing orbs, running them through the command engine and getting state back is mostly set but implementation needs an overhaul in places. 3. For testing I use the following config options: fwohci* at cardbus? dev ? function ? # IEEE1394 Controller fw* at fwbus? options FW_DEBUG options FWNODE_DEBUG options P1212_DEBUG options SBP2_DEBUG options SBPSCSI_DEBUG fwnode* at fwbus? sbpscsi* at fwnode? scsibus* at sbpscsi?
2002-11-22 19:28:54 +03:00
device sbpscsi: scsi, sbp2
attach sbpscsi at fwnode
Put in the structure for fwnode/fwscsi
2001-05-01 08:48:10 +04:00
First pass (checkpoint checkin) for firewire scsi code. There are a number of issues here for anyone trying to use this today: 1. On my test drive the command engine on the drive seems to stall after the inquire is done. So the mode sense times out for a long time before aborting. This obviously needs to be tracked down and fixed. However it does do a proper inquire: scsibus0 at sbpscsi0: 1 target, 1 lun per target sd0 at scsibus0 target 0 lun 0: <Maxtor, 1394 storage, 60> disk fixed 2. This code is quite ugly in places as debug code was added to test things. Definitly needs cleanup/documention in places where it's using command structures. The structure for alloc'ing orbs, running them through the command engine and getting state back is mostly set but implementation needs an overhaul in places. 3. For testing I use the following config options: fwohci* at cardbus? dev ? function ? # IEEE1394 Controller fw* at fwbus? options FW_DEBUG options FWNODE_DEBUG options P1212_DEBUG options SBP2_DEBUG options SBPSCSI_DEBUG fwnode* at fwbus? sbpscsi* at fwnode? scsibus* at sbpscsi?
2002-11-22 19:28:54 +03:00
file dev/ieee1394/sbpscsi.c sbpscsi
Put in the structure for fwnode/fwscsi
2001-05-01 08:48:10 +04:00
whitespace police
2001-02-24 04:59:46 +03:00
device fw: arp, ieee1394, ifnet
First Prototype implementation of network interface part for IEEE1394 (if_fw). Current status: Only OHCI chip is supported (fwohci). ping (IPv4) works with Sony's implementation (SmartConnect) on Win98. sometimes works but not stable. Not implemented yet: IRM (Isochronous Resource Manager) functionality. Link layer fragmentation. Topology map. More to do: clean ups MCAP charactor device part dhcp There is no entry in GENERIC config file yet. Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
2000-11-05 20:17:12 +03:00
attach fw at fwbus
file dev/ieee1394/if_fw.c fw
Reference in New Issue Copy Permalink