From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* $NetBSD: vars.c,v 1.17 2006/11/28 18:45:32 christos Exp $ */
|
1996-06-08 23:48:09 +04:00
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
1994-06-29 09:09:04 +04:00
|
|
|
* Copyright (c) 1980, 1993
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
1993-03-21 12:45:37 +03:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
2003-08-07 15:13:06 +04:00
|
|
|
* 3. Neither the name of the University nor the names of its contributors
|
1993-03-21 12:45:37 +03:00
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
1997-10-19 09:02:57 +04:00
|
|
|
#include <sys/cdefs.h>
|
1993-03-21 12:45:37 +03:00
|
|
|
#ifndef lint
|
1996-06-08 23:48:09 +04:00
|
|
|
#if 0
|
|
|
|
static char sccsid[] = "@(#)vars.c 8.1 (Berkeley) 6/6/93";
|
|
|
|
#else
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
__RCSID("$NetBSD: vars.c,v 1.17 2006/11/28 18:45:32 christos Exp $");
|
1996-06-08 23:48:09 +04:00
|
|
|
#endif
|
1993-03-21 12:45:37 +03:00
|
|
|
#endif /* not lint */
|
|
|
|
|
|
|
|
#include "rcv.h"
|
2006-10-22 01:37:20 +04:00
|
|
|
#include <util.h>
|
|
|
|
|
1994-06-29 09:09:04 +04:00
|
|
|
#include "extern.h"
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Mail -- a mail program
|
|
|
|
*
|
|
|
|
* Variable handling stuff.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Free up a variable string. We do not bother to allocate
|
|
|
|
* strings whose value is "" since they are expected to be frequent.
|
|
|
|
* Thus, we cannot free same!
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void
|
2002-03-02 17:59:35 +03:00
|
|
|
v_free(char *cp)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
|
|
|
if (*cp)
|
|
|
|
free(cp);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copy a variable value into permanent (ie, not collected after each
|
|
|
|
* command) space. Do not bother to alloc space for ""
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC char *
|
2005-07-19 05:38:38 +04:00
|
|
|
vcopy(const char str[])
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
|
|
|
char *new;
|
2005-07-20 03:07:10 +04:00
|
|
|
size_t len;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
if (*str == '\0')
|
2006-10-22 01:37:20 +04:00
|
|
|
return estrdup("");
|
1993-03-21 12:45:37 +03:00
|
|
|
len = strlen(str) + 1;
|
2006-10-22 01:37:20 +04:00
|
|
|
new = emalloc(len);
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)memmove(new, str, len);
|
1993-03-21 12:45:37 +03:00
|
|
|
return new;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Hash the passed string and return an index into
|
|
|
|
* the variable or group hash table.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
hash(const char *name)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int h = 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
while (*name) {
|
|
|
|
h <<= 2;
|
|
|
|
h += *name++;
|
|
|
|
}
|
|
|
|
if (h < 0 && (h = -h) < 0)
|
|
|
|
h = 0;
|
|
|
|
return h % HSHSIZE;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Locate a variable and return its variable
|
|
|
|
* node.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC struct var *
|
2005-07-19 05:38:38 +04:00
|
|
|
lookup(const char name[])
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
struct var *vp;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
2002-03-04 06:16:10 +03:00
|
|
|
for (vp = variables[hash(name)]; vp != NULL; vp = vp->v_link)
|
1993-03-21 12:45:37 +03:00
|
|
|
if (*vp->v_name == *name && equal(vp->v_name, name))
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return vp;
|
|
|
|
return NULL;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Assign a value to a variable.
|
|
|
|
*/
|
|
|
|
PUBLIC void
|
|
|
|
assign(const char name[], const char values[])
|
|
|
|
{
|
|
|
|
struct var *vp;
|
|
|
|
int h;
|
|
|
|
|
|
|
|
h = hash(name);
|
|
|
|
vp = lookup(name);
|
|
|
|
if (vp == NULL) {
|
|
|
|
vp = (struct var *) ecalloc(1, sizeof *vp);
|
|
|
|
vp->v_name = vcopy(name);
|
|
|
|
vp->v_link = variables[h];
|
|
|
|
variables[h] = vp;
|
|
|
|
}
|
|
|
|
else
|
|
|
|
v_free(vp->v_value);
|
|
|
|
vp->v_value = vcopy(values);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the value of a variable and return it.
|
|
|
|
* Look in the environment if its not available locally.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC char *
|
|
|
|
value(const char name[])
|
|
|
|
{
|
|
|
|
struct var *vp;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((vp = lookup(name)) == NULL)
|
|
|
|
return getenv(name);
|
|
|
|
return vp->v_value;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Locate a group name and return it.
|
|
|
|
*/
|
|
|
|
PUBLIC struct grouphead *
|
|
|
|
findgroup(const char name[])
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
struct grouphead *gh;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
2002-03-04 06:16:10 +03:00
|
|
|
for (gh = groups[hash(name)]; gh != NULL; gh = gh->g_link)
|
1993-03-21 12:45:37 +03:00
|
|
|
if (*gh->g_name == *name && equal(gh->g_name, name))
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return gh;
|
|
|
|
return NULL;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print a group out on stdout
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void
|
|
|
|
printgroup(const char name[])
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
struct grouphead *gh;
|
|
|
|
struct group *gp;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
2002-03-04 06:16:10 +03:00
|
|
|
if ((gh = findgroup(name)) == NULL) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("\"%s\": not a group\n", name);
|
1993-03-21 12:45:37 +03:00
|
|
|
return;
|
|
|
|
}
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("%s\t", gh->g_name);
|
2002-03-04 06:16:10 +03:00
|
|
|
for (gp = gh->g_list; gp != NULL; gp = gp->ge_link)
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf(" %s", gp->ge_name);
|
|
|
|
(void)putchar('\n');
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|