2004-05-25 08:29:08 +04:00
|
|
|
/* $NetBSD: irix_sysctl.c,v 1.4 2004/05/25 04:29:08 atatat Exp $ */
|
2002-11-09 12:03:56 +03:00
|
|
|
|
|
|
|
/*-
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
* Copyright (c) 2003 The NetBSD Foundation, Inc.
|
2002-11-09 12:03:56 +03:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
* by Andrew Brown.
|
2002-11-09 12:03:56 +03:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
* This product includes software developed by the NetBSD
|
|
|
|
* Foundation, Inc. and its contributors.
|
|
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
|
|
* contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
2004-05-25 08:29:08 +04:00
|
|
|
__KERNEL_RCSID(0, "$NetBSD: irix_sysctl.c,v 1.4 2004/05/25 04:29:08 atatat Exp $");
|
2002-11-09 12:03:56 +03:00
|
|
|
|
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/signal.h>
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
|
|
|
#include <compat/irix/irix_sysctl.h>
|
|
|
|
|
2004-05-25 08:29:08 +04:00
|
|
|
SYSCTL_SETUP(sysctl_emul_irix_setup, "sysctl emul.irix subtree setup")
|
2002-11-09 12:03:56 +03:00
|
|
|
{
|
|
|
|
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT,
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
CTLTYPE_NODE, "emul", NULL,
|
|
|
|
NULL, 0, NULL, 0,
|
|
|
|
CTL_EMUL, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_NODE, "irix",
|
|
|
|
SYSCTL_DESCR("IRIX emulation settings"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, NULL, 0,
|
|
|
|
CTL_EMUL, EMUL_IRIX, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_NODE, "kern",
|
|
|
|
SYSCTL_DESCR("IRIX kernel emulation settings"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, NULL, 0,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN, CTL_EOL);
|
|
|
|
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "vendor",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX vendor name"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_vendor, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_VENDOR, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "osprovider",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX system manufacturer"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_os_provider, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_OSPROVIDER, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "osname",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX operating system name"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_os_name, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_OSNAME, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "hwname",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX system type"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_hw_name, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_HWNAME, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "osrelmaj",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX major release number"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_osrel_maj, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_OSRELMAJ, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "osrelmin",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX minor release number"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_osrel_min, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_OSRELMIN, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "osrelpatch",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX patch level"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_osrel_patch, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_OSRELPATCH, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "processor",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX processor type"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_processors, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_PROCESSOR, CTL_EOL);
|
2004-03-24 18:34:46 +03:00
|
|
|
sysctl_createv(clog, 0, NULL, NULL,
|
|
|
|
CTLFLAG_PERMANENT|CTLFLAG_READWRITE,
|
2004-05-25 08:29:08 +04:00
|
|
|
CTLTYPE_STRING, "version",
|
|
|
|
SYSCTL_DESCR("Emulated IRIX version number"),
|
Dynamic sysctl.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
2003-12-04 22:38:21 +03:00
|
|
|
NULL, 0, irix_si_version, 128,
|
|
|
|
CTL_EMUL, EMUL_IRIX, EMUL_IRIX_KERN,
|
|
|
|
EMUL_IRIX_KERN_VERSION, CTL_EOL);
|
2002-11-09 12:03:56 +03:00
|
|
|
}
|