From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
/* $NetBSD: cmd2.c,v 1.24 2009/04/10 13:08:24 christos Exp $ */
|
1996-06-08 23:48:09 +04:00
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
1994-06-29 09:09:04 +04:00
|
|
|
* Copyright (c) 1980, 1993
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
1993-03-21 12:45:37 +03:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
2003-08-07 15:13:06 +04:00
|
|
|
* 3. Neither the name of the University nor the names of its contributors
|
1993-03-21 12:45:37 +03:00
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
1997-10-19 09:02:57 +04:00
|
|
|
#include <sys/cdefs.h>
|
1993-03-21 12:45:37 +03:00
|
|
|
#ifndef lint
|
1996-06-08 23:48:09 +04:00
|
|
|
#if 0
|
|
|
|
static char sccsid[] = "@(#)cmd2.c 8.1 (Berkeley) 6/6/93";
|
|
|
|
#else
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
__RCSID("$NetBSD: cmd2.c,v 1.24 2009/04/10 13:08:24 christos Exp $");
|
1996-06-08 23:48:09 +04:00
|
|
|
#endif
|
1993-03-21 12:45:37 +03:00
|
|
|
#endif /* not lint */
|
|
|
|
|
|
|
|
#include "rcv.h"
|
2006-10-22 01:37:20 +04:00
|
|
|
#include <util.h>
|
1994-06-29 09:09:04 +04:00
|
|
|
#include "extern.h"
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#ifdef MIME_SUPPORT
|
|
|
|
#include "mime.h"
|
|
|
|
#endif
|
|
|
|
#include "thread.h"
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Mail -- a mail program
|
|
|
|
*
|
|
|
|
* More user commands.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If any arguments were given, go to the next applicable argument
|
|
|
|
* following dot, otherwise, go to the next applicable message.
|
|
|
|
* If given as first command with no arguments, print first message.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
next(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
int *msgvec;
|
1997-10-19 09:02:57 +04:00
|
|
|
struct message *mp;
|
|
|
|
int *ip, *ip2;
|
1993-03-21 12:45:37 +03:00
|
|
|
int list[2], mdot;
|
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
msgvec = v;
|
1997-05-17 23:47:50 +04:00
|
|
|
if (*msgvec != 0) {
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
/*
|
1997-05-17 23:47:50 +04:00
|
|
|
* If some messages were supplied, find the
|
1993-03-21 12:45:37 +03:00
|
|
|
* first applicable one following dot using
|
|
|
|
* wrap around.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
mdot = get_msgnum(dot);
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Find the first message in the supplied
|
|
|
|
* message list which follows dot.
|
|
|
|
*/
|
|
|
|
|
1997-05-17 23:47:50 +04:00
|
|
|
for (ip = msgvec; *ip != 0; ip++)
|
1993-03-21 12:45:37 +03:00
|
|
|
if (*ip > mdot)
|
|
|
|
break;
|
1997-05-17 23:47:50 +04:00
|
|
|
if (*ip == 0)
|
1993-03-21 12:45:37 +03:00
|
|
|
ip = msgvec;
|
|
|
|
ip2 = ip;
|
|
|
|
do {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
mp = get_message(*ip2);
|
1993-03-21 12:45:37 +03:00
|
|
|
if ((mp->m_flag & MDELETED) == 0) {
|
|
|
|
dot = mp;
|
|
|
|
goto hitit;
|
|
|
|
}
|
1997-05-17 23:47:50 +04:00
|
|
|
if (*ip2 != 0)
|
1993-03-21 12:45:37 +03:00
|
|
|
ip2++;
|
1997-05-17 23:47:50 +04:00
|
|
|
if (*ip2 == 0)
|
1993-03-21 12:45:37 +03:00
|
|
|
ip2 = msgvec;
|
|
|
|
} while (ip2 != ip);
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("No messages applicable\n");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If this is the first command, select message 1.
|
|
|
|
* Note that this must exist for us to get here at all.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (!sawcom)
|
|
|
|
goto hitit;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Just find the next good message after dot, no
|
|
|
|
* wraparound.
|
|
|
|
*/
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
for (mp = next_message(dot); mp; mp = next_message(mp))
|
1993-03-21 12:45:37 +03:00
|
|
|
if ((mp->m_flag & (MDELETED|MSAVED)) == 0)
|
|
|
|
break;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
if (mp == NULL) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("At EOF\n");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
dot = mp;
|
|
|
|
hitit:
|
|
|
|
/*
|
|
|
|
* Print dot.
|
|
|
|
*/
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
list[0] = get_msgnum(dot);
|
1997-05-17 23:47:50 +04:00
|
|
|
list[1] = 0;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return type(list);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Snarf the file from the end of the command line and
|
|
|
|
* return a pointer to it. If there is no file attached,
|
|
|
|
* just return NULL. Put a null in front of the file
|
|
|
|
* name so that the message list processing won't see it,
|
|
|
|
* unless the file name is the only thing on the line, in
|
|
|
|
* which case, return 0 in the reference flag variable.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static char *
|
|
|
|
snarf(char linebuf[], int *flag, const char *string)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
char *cp;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
*flag = 1;
|
|
|
|
cp = strlen(linebuf) + linebuf - 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*
|
|
|
|
* Strip away trailing blanks.
|
|
|
|
*/
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
while (cp >= linebuf && isspace((unsigned char)*cp))
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
cp--;
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
*++cp = '\0';
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Now search for the beginning of the file name.
|
|
|
|
*/
|
|
|
|
while (cp > linebuf && !isspace((unsigned char)*cp))
|
|
|
|
cp--;
|
|
|
|
if (*cp == '\0') {
|
|
|
|
(void)printf("No %s specified.\n", string);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
if (isspace((unsigned char)*cp))
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
*cp++ = '\0';
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
else
|
|
|
|
*flag = 0;
|
|
|
|
return cp;
|
2002-03-29 18:10:02 +03:00
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
struct save1_core_args_s {
|
|
|
|
FILE *obuf;
|
|
|
|
struct ignoretab *igtab;
|
|
|
|
int markmsg;
|
|
|
|
};
|
|
|
|
static int
|
|
|
|
save1_core(struct message *mp, void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
struct save1_core_args_s *args;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
args = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
touch(mp);
|
|
|
|
|
|
|
|
if (sendmessage(mp, args->obuf, args->igtab, NULL, NULL) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
if (args->markmsg)
|
|
|
|
mp->m_flag |= MSAVED;
|
|
|
|
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Save/copy the indicated messages at the end of the passed file name.
|
2002-03-02 18:27:51 +03:00
|
|
|
* If markmsg is true, mark the message "saved."
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int
|
|
|
|
save1(char str[], int markmsg, const char *cmd, struct ignoretab *igtab)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
int *ip;
|
2005-07-19 05:38:38 +04:00
|
|
|
const char *fn;
|
|
|
|
const char *disp;
|
1993-03-21 12:45:37 +03:00
|
|
|
int f, *msgvec;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int msgCount;
|
1993-03-21 12:45:37 +03:00
|
|
|
FILE *obuf;
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
msgCount = get_msgCount();
|
2007-10-27 19:14:50 +04:00
|
|
|
msgvec = salloc((msgCount + 2) * sizeof(*msgvec));
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((fn = snarf(str, &f, "file")) == NULL)
|
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
if (!f) {
|
|
|
|
*msgvec = first(0, MMNORM);
|
1997-05-17 23:47:50 +04:00
|
|
|
if (*msgvec == 0) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("No messages to %s.\n", cmd);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
1997-05-17 23:47:50 +04:00
|
|
|
msgvec[1] = 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
if (f && getmsglist(str, msgvec, 0) < 0)
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
2002-03-04 06:07:25 +03:00
|
|
|
if ((fn = expand(fn)) == NULL)
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("\"%s\" ", fn);
|
|
|
|
(void)fflush(stdout);
|
2002-03-02 18:27:51 +03:00
|
|
|
if (access(fn, 0) >= 0)
|
1993-03-21 12:45:37 +03:00
|
|
|
disp = "[Appended]";
|
|
|
|
else
|
|
|
|
disp = "[New file]";
|
2002-03-02 18:27:51 +03:00
|
|
|
if ((obuf = Fopen(fn, "a")) == NULL) {
|
2002-03-06 00:29:30 +03:00
|
|
|
warn(NULL);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
for (ip = msgvec; *ip && ip - msgvec < msgCount; ip++) {
|
|
|
|
struct save1_core_args_s args;
|
|
|
|
struct message *mp;
|
|
|
|
|
|
|
|
args.obuf = obuf;
|
|
|
|
args.igtab = igtab;
|
|
|
|
args.markmsg = markmsg;
|
|
|
|
mp = get_message(*ip);
|
|
|
|
if (thread_recursion(mp, save1_core, &args)) {
|
2002-03-06 00:29:30 +03:00
|
|
|
warn("%s", fn);
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)Fclose(obuf);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
}
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)fflush(obuf);
|
1993-03-21 12:45:37 +03:00
|
|
|
if (ferror(obuf))
|
2002-03-06 00:29:30 +03:00
|
|
|
warn("%s", fn);
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)Fclose(obuf);
|
|
|
|
(void)printf("%s\n", disp);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Save a message in a file. Mark the message as saved
|
|
|
|
* so we can discard when the user quits.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
save(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char *str;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
str = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return save1(str, 1, "save", saveignore);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Save a message in a file. Mark the message as saved
|
|
|
|
* so we can discard when the user quits. Save all fields
|
|
|
|
* overriding saveignore and saveretain.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
Save(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char *str;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
str = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return save1(str, 1, "Save", NULL);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Copy a message to a file without affected its saved-ness
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
copycmd(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char *str;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
str = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return save1(str, 0, "copy", saveignore);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Write the indicated messages at the end of the passed
|
|
|
|
* file name, minus header and trailing blank line.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
swrite(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char *str;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
str = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return save1(str, 1, "write", ignoreall);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Delete the indicated messages.
|
|
|
|
* Set dot to some nice place afterwards.
|
|
|
|
* Internal interface.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int
|
2002-03-02 17:59:35 +03:00
|
|
|
delm(int *msgvec)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
struct message *mp;
|
|
|
|
int *ip;
|
1993-03-21 12:45:37 +03:00
|
|
|
int last;
|
|
|
|
|
1997-05-17 23:47:50 +04:00
|
|
|
last = 0;
|
|
|
|
for (ip = msgvec; *ip != 0; ip++) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
mp = set_m_flag(*ip,
|
|
|
|
~(MPRESERVE|MSAVED|MBOX|MDELETED|MTOUCH), MDELETED|MTOUCH);
|
1993-03-21 12:45:37 +03:00
|
|
|
touch(mp);
|
|
|
|
last = *ip;
|
|
|
|
}
|
1997-05-17 23:47:50 +04:00
|
|
|
if (last != 0) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
dot = get_message(last);
|
1993-03-21 12:45:37 +03:00
|
|
|
last = first(0, MDELETED);
|
1997-05-17 23:47:50 +04:00
|
|
|
if (last != 0) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
dot = get_message(last);
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
else {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
dot = get_message(1);
|
|
|
|
return -1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Following can't happen -- it keeps lint happy
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return -1;
|
|
|
|
}
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*
|
|
|
|
* Delete messages.
|
|
|
|
*/
|
|
|
|
PUBLIC int
|
|
|
|
delete(void *v)
|
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
int *msgvec;
|
|
|
|
|
|
|
|
msgvec = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)delm(msgvec);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Delete messages, then type the new dot.
|
|
|
|
*/
|
|
|
|
PUBLIC int
|
|
|
|
deltype(void *v)
|
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
int *msgvec;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int list[2];
|
|
|
|
int lastdot;
|
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
msgvec = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
lastdot = get_msgnum(dot);
|
|
|
|
if (delm(msgvec) >= 0) {
|
|
|
|
list[0] = get_msgnum(dot);
|
|
|
|
if (list[0] > lastdot) {
|
|
|
|
touch(dot);
|
|
|
|
list[1] = 0;
|
|
|
|
return type(list);
|
|
|
|
}
|
|
|
|
(void)printf("At EOF\n");
|
|
|
|
} else
|
|
|
|
(void)printf("No more messages\n");
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Undelete the indicated messages.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
undeletecmd(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int msgCount;
|
|
|
|
int *msgvec;
|
1997-10-19 09:02:57 +04:00
|
|
|
int *ip;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
msgvec = v;
|
|
|
|
msgCount = get_msgCount();
|
1993-03-21 12:45:37 +03:00
|
|
|
for (ip = msgvec; *ip && ip-msgvec < msgCount; ip++) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
dot = set_m_flag(*ip, ~MDELETED, 0);
|
|
|
|
touch(dot);
|
|
|
|
dot->m_flag &= ~MDELETED;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*************************************************************************/
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
|
|
|
* Interactively dump core on "core"
|
|
|
|
*/
|
2005-07-20 03:07:10 +04:00
|
|
|
/*ARGSUSED*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2006-10-22 01:37:20 +04:00
|
|
|
core(void *v __unused)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
|
|
|
int pid;
|
|
|
|
|
|
|
|
switch (pid = vfork()) {
|
|
|
|
case -1:
|
2002-03-06 00:29:30 +03:00
|
|
|
warn("fork");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
case 0:
|
|
|
|
abort();
|
|
|
|
_exit(1);
|
|
|
|
}
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("Okie dokie");
|
|
|
|
(void)fflush(stdout);
|
|
|
|
(void)wait_child(pid);
|
1998-12-19 19:31:41 +03:00
|
|
|
if (WCOREDUMP(wait_status))
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf(" -- Core dumped.\n");
|
1993-03-21 12:45:37 +03:00
|
|
|
else
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf(" -- Can't dump core.\n");
|
1993-03-21 12:45:37 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*
|
|
|
|
* Clobber the stack.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
clob1(int n)
|
|
|
|
{
|
|
|
|
char buf[512];
|
|
|
|
char *cp;
|
|
|
|
|
|
|
|
if (n <= 0)
|
|
|
|
return;
|
|
|
|
for (cp = buf; cp < &buf[512]; *cp++ = (char)0xFF)
|
|
|
|
continue;
|
|
|
|
clob1(n - 1);
|
|
|
|
}
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
|
|
|
* Clobber as many bytes of stack as the user requests.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
clobber(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char **argv;
|
1997-10-19 09:02:57 +04:00
|
|
|
int times;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
argv = v;
|
1993-03-21 12:45:37 +03:00
|
|
|
if (argv[0] == 0)
|
|
|
|
times = 1;
|
|
|
|
else
|
|
|
|
times = (atoi(argv[0]) + 511) / 512;
|
|
|
|
clob1(times);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Compare two names for sorting ignored field list.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int
|
|
|
|
igcomp(const void *l, const void *r)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return strcmp(*(const char *const *)l, *(const char *const *)r);
|
|
|
|
}
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*
|
|
|
|
* Print out all currently retained fields.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
igshow(struct ignoretab *tab, const char *which)
|
|
|
|
{
|
|
|
|
int h;
|
|
|
|
struct ignore *igp;
|
|
|
|
char **ap, **ring;
|
|
|
|
|
|
|
|
if (tab->i_count == 0) {
|
|
|
|
(void)printf("No fields currently being %s.\n", which);
|
|
|
|
return 0;
|
|
|
|
}
|
2007-10-27 19:14:50 +04:00
|
|
|
ring = salloc((tab->i_count + 1) * sizeof(char *));
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
ap = ring;
|
|
|
|
for (h = 0; h < HSHSIZE; h++)
|
|
|
|
for (igp = tab->i_head[h]; igp != 0; igp = igp->i_link)
|
|
|
|
*ap++ = igp->i_field;
|
|
|
|
*ap = 0;
|
2007-10-27 19:14:50 +04:00
|
|
|
qsort(ring, tab->i_count, sizeof(char *), igcomp);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
for (ap = ring; *ap != 0; ap++)
|
|
|
|
(void)printf("%s\n", *ap);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* core ignore routine.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
ignore1(char *list[], struct ignoretab *tab, const char *which)
|
|
|
|
{
|
|
|
|
char **ap;
|
|
|
|
|
|
|
|
if (*list == NULL)
|
|
|
|
return igshow(tab, which);
|
2007-10-27 19:14:50 +04:00
|
|
|
|
|
|
|
for (ap = list; *ap != 0; ap++)
|
|
|
|
add_ignore(*ap, tab);
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add the given header fields to the retained list.
|
|
|
|
* If no arguments, print the current list of retained fields.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
retfield(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char **list;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
list = v;
|
1993-03-21 12:45:37 +03:00
|
|
|
return ignore1(list, ignore + 1, "retained");
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add the given header fields to the ignored list.
|
|
|
|
* If no arguments, print the current list of ignored fields.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
igfield(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char **list;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
list = v;
|
1993-03-21 12:45:37 +03:00
|
|
|
return ignore1(list, ignore, "ignored");
|
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*
|
|
|
|
* Add the given header fields to the save retained list.
|
|
|
|
* If no arguments, print the current list of save retained fields.
|
|
|
|
*/
|
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
saveretfield(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char **list;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
list = v;
|
1993-03-21 12:45:37 +03:00
|
|
|
return ignore1(list, saveignore + 1, "retained");
|
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*
|
|
|
|
* Add the given header fields to the save ignored list.
|
|
|
|
* If no arguments, print the current list of save ignored fields.
|
|
|
|
*/
|
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
saveigfield(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
char **list;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
list = v;
|
1993-03-21 12:45:37 +03:00
|
|
|
return ignore1(list, saveignore, "ignored");
|
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#ifdef MIME_SUPPORT
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static char*
|
|
|
|
check_dirname(char *filename)
|
|
|
|
{
|
|
|
|
struct stat sb;
|
|
|
|
char *fname;
|
|
|
|
char canon_buf[MAXPATHLEN];
|
|
|
|
char *canon_name;
|
|
|
|
|
|
|
|
canon_name = canon_buf;
|
|
|
|
fname = filename;
|
|
|
|
if (fname[0] == '~' && fname[1] == '/') {
|
|
|
|
if (homedir && homedir[0] != '~')
|
|
|
|
(void)easprintf(&fname, "%s/%s",
|
|
|
|
homedir, fname + 2);
|
|
|
|
}
|
|
|
|
if (realpath(fname, canon_name) == NULL) {
|
|
|
|
warn("realpath: %s", filename);
|
|
|
|
canon_name = NULL;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
if (stat(canon_name, &sb) == -1) {
|
|
|
|
warn("stat: %s", canon_name);
|
|
|
|
canon_name = NULL;
|
|
|
|
goto done;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (!S_ISDIR(sb.st_mode)) {
|
|
|
|
warnx("stat: %s is not a directory", canon_name);
|
|
|
|
canon_name = NULL;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
if (access(canon_name, W_OK|X_OK) == -1) {
|
|
|
|
warnx("access: %s is not writable", canon_name);
|
|
|
|
canon_name = NULL;
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
goto done;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
}
|
|
|
|
done:
|
|
|
|
if (fname != filename)
|
|
|
|
free(fname);
|
|
|
|
|
|
|
|
return canon_name ? savestr(canon_name) : NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct detach1_core_args_s {
|
|
|
|
struct message *parent;
|
|
|
|
struct ignoretab *igtab;
|
|
|
|
const char *dstdir;
|
|
|
|
};
|
|
|
|
static int
|
|
|
|
detach1_core(struct message *mp, void *v)
|
|
|
|
{
|
|
|
|
struct mime_info *mip;
|
|
|
|
struct detach1_core_args_s *args;
|
|
|
|
|
|
|
|
args = v;
|
|
|
|
touch(mp);
|
|
|
|
show_msgnum(stdout, mp, args->parent);
|
|
|
|
mip = mime_decode_open(mp);
|
|
|
|
mime_detach_msgnum(mip, sget_msgnum(mp, args->parent));
|
|
|
|
(void)mime_sendmessage(mp, NULL, args->igtab, args->dstdir, mip);
|
|
|
|
mime_decode_close(mip);
|
1993-03-21 12:45:37 +03:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* detach attachments.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int
|
|
|
|
detach1(void *v, int do_unnamed)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int recursive;
|
|
|
|
int f;
|
|
|
|
int msgCount;
|
|
|
|
int *msgvec;
|
|
|
|
int *ip;
|
|
|
|
char *str;
|
|
|
|
char *dstdir;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
str = v;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the destination directory.
|
|
|
|
*/
|
|
|
|
if ((dstdir = snarf(str, &f, "directory")) == NULL &&
|
|
|
|
(dstdir = value(ENAME_MIME_DETACH_DIR)) == NULL &&
|
|
|
|
(dstdir = origdir) == NULL)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
if ((dstdir = check_dirname(dstdir)) == NULL)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Setup the message list.
|
|
|
|
*/
|
|
|
|
msgCount = get_msgCount();
|
2007-10-27 19:14:50 +04:00
|
|
|
msgvec = salloc((msgCount + 2) * sizeof(*msgvec));
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (!f) {
|
|
|
|
*msgvec = first(0, MMNORM);
|
|
|
|
if (*msgvec == 0) {
|
|
|
|
(void)printf("No messages to detach.\n");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
msgvec[1] = 0;
|
|
|
|
}
|
|
|
|
if (f && getmsglist(str, msgvec, 0) < 0)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
if (mime_detach_control() != 0)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* do 'dot' if nothing else was selected.
|
|
|
|
*/
|
|
|
|
if (msgvec[0] == 0 && dot != NULL) {
|
|
|
|
msgvec[0] = get_msgnum(dot);
|
|
|
|
msgvec[1] = 0;
|
|
|
|
}
|
|
|
|
recursive = do_recursion();
|
|
|
|
for (ip = msgvec; *ip && ip - msgvec < msgCount; ip++) {
|
|
|
|
struct detach1_core_args_s args;
|
|
|
|
struct message *mp;
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
mp = get_message(*ip);
|
|
|
|
dot = mp;
|
|
|
|
args.parent = recursive ? mp : NULL;
|
|
|
|
args.igtab = do_unnamed ? detachall : ignoreall;
|
|
|
|
args.dstdir = dstdir;
|
|
|
|
(void)thread_recursion(mp, detach1_core, &args);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* detach named attachments.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
detach(void *v)
|
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return detach1(v, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* detach all attachments.
|
|
|
|
*/
|
|
|
|
PUBLIC int
|
|
|
|
Detach(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return detach1(v, 1);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#endif /* MIME_SUPPORT */
|