NetBSD/sys/dev/mii/atphy.c

462 lines
12 KiB
C
Raw Normal View History

/* $NetBSD: atphy.c,v 1.26 2019/11/27 10:19:20 msaitoh Exp $ */
/* $OpenBSD: atphy.c,v 1.1 2008/09/25 20:47:16 brad Exp $ */
/*-
* Copyright (c) 2008, Pyun YongHyeon <yongari@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Driver for the Attansic F1 10/100/1000 PHY.
*/
2009-01-17 00:47:56 +03:00
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: atphy.c,v 1.26 2019/11/27 10:19:20 msaitoh Exp $");
2009-01-17 00:47:56 +03:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/miidevs.h>
/* Special Control Register */
#define ATPHY_SCR 0x10
#define ATPHY_SCR_JABBER_DISABLE 0x0001
#define ATPHY_SCR_POLARITY_REVERSAL 0x0002
#define ATPHY_SCR_SQE_TEST 0x0004
#define ATPHY_SCR_MAC_PDOWN 0x0008
#define ATPHY_SCR_CLK125_DISABLE 0x0010
#define ATPHY_SCR_MDI_MANUAL_MODE 0x0000
#define ATPHY_SCR_MDIX_MANUAL_MODE 0x0020
#define ATPHY_SCR_AUTO_X_1000T 0x0040
#define ATPHY_SCR_AUTO_X_MODE 0x0060
#define ATPHY_SCR_10BT_EXT_ENABLE 0x0080
#define ATPHY_SCR_MII_5BIT_ENABLE 0x0100
#define ATPHY_SCR_SCRAMBLER_DISABLE 0x0200
#define ATPHY_SCR_FORCE_LINK_GOOD 0x0400
#define ATPHY_SCR_ASSERT_CRS_ON_TX 0x0800
/* Special Status Register. */
#define ATPHY_SSR 0x11
#define ATPHY_SSR_SPD_DPLX_RESOLVED 0x0800
#define ATPHY_SSR_DUPLEX 0x2000
#define ATPHY_SSR_SPEED_MASK 0xC000
#define ATPHY_SSR_10MBS 0x0000
#define ATPHY_SSR_100MBS 0x4000
#define ATPHY_SSR_1000MBS 0x8000
#define ATPHY_DEBUG_PORT_ADDR 0x1d
#define ATPHY_DEBUG_PORT_DATA 0x1e
#define ATPHY_RGMII_RX_CLK_DLY __BIT(15)
#define ATPHY_RGMII_TX_CLK_DLY __BIT(8)
static int atphy_match(device_t, cfdata_t, void *);
static void atphy_attach(device_t, device_t, void *);
static int atphy_service(struct mii_softc *, struct mii_data *, int);
static void atphy_reset(struct mii_softc *);
static void atphy_status(struct mii_softc *);
static int atphy_mii_phy_auto(struct mii_softc *);
static bool atphy_is_gige(const struct mii_phydesc *);
struct atphy_softc {
struct mii_softc mii_sc;
int mii_clk_25m;
bool rgmii_tx_internal_delay;
bool rgmii_rx_internal_delay;
};
CFATTACH_DECL_NEW(atphy, sizeof(struct atphy_softc),
atphy_match, atphy_attach, mii_phy_detach, mii_phy_activate);
const struct mii_phy_funcs atphy_funcs = {
atphy_service, atphy_status, atphy_reset,
};
2019-09-02 15:48:52 +03:00
static const struct mii_phydesc atphys[] = {
MII_PHY_DESC(ATHEROS, F1),
MII_PHY_DESC(ATTANSIC, L1),
MII_PHY_DESC(ATTANSIC, L2),
MII_PHY_DESC(ATTANSIC, AR8021),
MII_PHY_DESC(ATTANSIC, AR8035),
MII_PHY_END,
};
static void
atphy_clk_25m(struct atphy_softc *asc)
{
struct mii_softc *sc = &asc->mii_sc;
struct {
uint32_t hz;
uint16_t data;
} select_clk[] = {
{ 25000000, 0x0 },
{ 50000000, 0x1 },
{ 62500000, 0x2 },
{ 125000000, 0x3 }
};
uint16_t data = 0;
uint16_t reg = 0;
for (int i = 0; i < __arraycount(select_clk); i++) {
if (asc->mii_clk_25m <= select_clk[i].hz)
data = select_clk[i].data;
}
PHY_WRITE(sc, 0x0d, 0x0007);
PHY_WRITE(sc, 0x0e, 0x8016);
PHY_WRITE(sc, 0x0d, 0x4007);
PHY_READ(sc, 0x0e, &reg);
PHY_WRITE(sc, 0x0e, reg | __SHIFTIN(data, __BITS(4, 3)));
}
static bool
atphy_is_gige(const struct mii_phydesc *mpd)
{
switch (mpd->mpd_oui) {
case MII_OUI_ATTANSIC:
switch (mpd->mpd_model) {
case MII_MODEL_ATTANSIC_L2:
return false;
}
}
return true;
}
static int
atphy_match(device_t parent, cfdata_t match, void *aux)
{
struct mii_attach_args *ma = aux;
2019-09-02 15:48:52 +03:00
if (mii_phy_match(ma, atphys) != NULL)
return 10;
return 0;
}
void
atphy_attach(device_t parent, device_t self, void *aux)
{
struct atphy_softc *asc = device_private(self);
prop_dictionary_t parent_prop = device_properties(parent);
prop_dictionary_t prop = device_properties(self);
struct mii_softc *sc = &asc->mii_sc;
struct mii_attach_args *ma = aux;
struct mii_data *mii = ma->mii_data;
const struct mii_phydesc *mpd;
uint16_t bmsr;
2019-09-02 15:48:52 +03:00
mpd = mii_phy_match(ma, atphys);
aprint_naive(": Media interface\n");
aprint_normal(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
sc->mii_dev = self;
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
2016-11-02 13:11:32 +03:00
sc->mii_mpd_oui = MII_OUI(ma->mii_id1, ma->mii_id2);
sc->mii_mpd_model = MII_MODEL(ma->mii_id2);
sc->mii_mpd_rev = MII_REV(ma->mii_id2);
sc->mii_funcs = &atphy_funcs;
sc->mii_pdata = mii;
sc->mii_flags = ma->mii_flags;
sc->mii_flags |= MIIF_NOLOOP;
prop_dictionary_get_bool(parent_prop, "tx_internal_delay", &asc->rgmii_tx_internal_delay);
prop_dictionary_get_bool(parent_prop, "rx_internal_delay", &asc->rgmii_rx_internal_delay);
prop_dictionary_get_uint32(prop, "clk_25m", &asc->mii_clk_25m);
if (asc->mii_clk_25m != 0)
atphy_clk_25m(asc);
PHY_RESET(sc);
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMSR, &bmsr);
PHY_READ(sc, MII_BMSR, &bmsr);
sc->mii_capabilities = bmsr & ma->mii_capmask;
if (atphy_is_gige(mpd) && (sc->mii_capabilities & BMSR_EXTSTAT))
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_EXTSR, &sc->mii_extcapabilities);
mii_phy_add_media(sc);
}
int
atphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
uint16_t anar, bmcr, bmsr;
switch (cmd) {
case MII_POLLSTAT:
2019-03-25 12:20:46 +03:00
/* If we're not polling our PHY instance, just return. */
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return 0;
break;
case MII_MEDIACHG:
/*
* If the media indicates a different PHY instance,
* isolate ourselves.
*/
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMCR, &bmcr);
PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO);
return 0;
}
2019-03-25 12:20:46 +03:00
/* If the interface is not up, don't do anything. */
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
bmcr = 0;
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
case IFM_1000_T:
atphy_mii_phy_auto(sc);
goto done;
case IFM_100_TX:
bmcr = BMCR_S100;
break;
case IFM_10_T:
bmcr = BMCR_S10;
break;
case IFM_NONE:
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMCR, &bmcr);
/*
* XXX
* Due to an unknown reason powering down PHY resulted
* in unexpected results such as inaccessibility of
* hardware of freshly rebooted system. Disable
* powering down PHY until I got more information for
* Attansic/Atheros PHY hardwares.
*/
PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_ISO);
goto done;
default:
return EINVAL;
}
anar = mii_anar(ife);
2019-04-11 12:00:34 +03:00
if ((ife->ifm_media & IFM_FDX) != 0) {
bmcr |= BMCR_FDX;
/* Enable pause. */
if (sc->mii_flags & MIIF_DOPAUSE)
anar |= ANAR_PAUSE_TOWARDS;
}
if ((sc->mii_extcapabilities & (EXTSR_1000TFDX |
EXTSR_1000THDX)) != 0)
PHY_WRITE(sc, MII_100T2CR, 0);
PHY_WRITE(sc, MII_ANAR, anar);
2019-03-25 12:20:46 +03:00
/* Start autonegotiation. */
PHY_WRITE(sc, MII_BMCR, bmcr | BMCR_AUTOEN | BMCR_STARTNEG);
done:
break;
case MII_TICK:
2019-03-25 12:20:46 +03:00
/* If we're not currently selected, just return. */
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return 0;
2019-03-25 12:20:46 +03:00
/* Is the interface even up? */
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return 0;
2019-03-25 12:20:46 +03:00
/* Only used for autonegotiation. */
if ((IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) &&
(IFM_SUBTYPE(ife->ifm_media) != IFM_1000_T)) {
sc->mii_ticks = 0;
break;
}
/*
* Check for link.
* Read the status register twice; BMSR_LINK is latch-low.
*/
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMSR, &bmsr);
PHY_READ(sc, MII_BMSR, &bmsr);
if (bmsr & BMSR_LINK) {
sc->mii_ticks = 0;
break;
}
/* Announce link loss right after it happens. */
if (sc->mii_ticks++ == 0)
break;
2019-03-25 12:20:46 +03:00
/* Only retry autonegotiation every mii_anegticks seconds. */
if (sc->mii_ticks <= sc->mii_anegticks)
break;
atphy_mii_phy_auto(sc);
break;
}
/* Update the media status. */
mii_phy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return 0;
}
static void
atphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
uint16_t bmsr, bmcr, gsr, ssr;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMSR, &bmsr);
PHY_READ(sc, MII_BMSR, &bmsr);
if (bmsr & BMSR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMCR, &bmcr);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, ATPHY_SSR, &ssr);
if (!(ssr & ATPHY_SSR_SPD_DPLX_RESOLVED)) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
switch (ssr & ATPHY_SSR_SPEED_MASK) {
case ATPHY_SSR_1000MBS:
mii->mii_media_active |= IFM_1000_T;
/*
* atphy(4) has a valid link so reset mii_ticks.
* Resetting mii_ticks is needed in order to
* detect link loss after auto-negotiation.
*/
sc->mii_ticks = 0;
break;
case ATPHY_SSR_100MBS:
mii->mii_media_active |= IFM_100_TX;
sc->mii_ticks = 0;
break;
case ATPHY_SSR_10MBS:
mii->mii_media_active |= IFM_10_T;
sc->mii_ticks = 0;
break;
default:
mii->mii_media_active |= IFM_NONE;
return;
}
if (ssr & ATPHY_SSR_DUPLEX)
mii->mii_media_active |= IFM_FDX | mii_phy_flowstatus(sc);
else
mii->mii_media_active |= IFM_HDX;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_100T2SR, &gsr);
if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) &&
gsr & GTSR_MS_RES)
mii->mii_media_active |= IFM_ETH_MASTER;
}
static void
atphy_reset(struct mii_softc *sc)
{
struct atphy_softc *asc = (struct atphy_softc *)sc;
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
uint16_t reg;
int i;
/* Take PHY out of power down mode. */
PHY_WRITE(sc, 29, 0x29);
PHY_WRITE(sc, 30, 0);
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, ATPHY_SCR, &reg);
/* Enable automatic crossover. */
reg |= ATPHY_SCR_AUTO_X_MODE;
/* Disable power down. */
reg &= ~ATPHY_SCR_MAC_PDOWN;
/* Enable CRS on Tx. */
reg |= ATPHY_SCR_ASSERT_CRS_ON_TX;
/* Auto correction for reversed cable polarity. */
reg |= ATPHY_SCR_POLARITY_REVERSAL;
PHY_WRITE(sc, ATPHY_SCR, reg);
atphy_mii_phy_auto(sc);
/* Workaround F1 bug to reset phy. */
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMCR, &reg);
reg |= BMCR_RESET;
PHY_WRITE(sc, MII_BMCR, reg);
for (i = 0; i < 1000; i++) {
DELAY(1);
Change MII PHY read/write API from: int (*mii_readreg_t)(device_t, int, int); void (*mii_writereg_t)(device_t, int, int, int); to: int (*mii_readreg_t)(device_t, int, int, uint16_t *); int (*mii_writereg_t)(device_t, int, int, uint16_t); Now we can test if a read/write operation failed or not by the return value. In 802.3 spec says that the PHY shall not respond to read/write transaction to the unimplemented register(22.2.4.3). Detecting timeout can be used to check whether a register is implemented or not (if the register conforms to the spec). ukphy(4) can be used this for MII_MMDACR and MII_MMDAADR. Note that I noticed that the following code do infinite loop in the read/wirte function. If it accesses unimplemented PHY register, it will hang. It should be fixed: arm/at91/at91emac.c arm/ep93xx/epe.c arm/omap/omapl1x_emac.c mips/ralink/ralink_eth.c arch/powerpc/booke/dev/pq3etsec.c(read) dev/cadence/if_cemac.c <- hkenken dev/ic/lan9118.c Tested with the following device: axe+ukphy axe+rgephy axen+rgephy (tested by Andrius V) wm+atphy wm+ukphy wm+igphy wm+ihphy wm+makphy sk+makphy sk+brgphy sk+gentbi msk+makphy sip+icsphy sip+ukphy re+rgephy bge+brgphy bnx+brgphy gsip+gphyter rtk+rlphy fxp+inphy (tested by Andrius V) tlp+acphy ex+exphy epic+qsphy vge+ciphy (tested by Andrius V) vr+ukphy (tested by Andrius V) vte+ukphy (tested by Andrius V) Not tested (MAC): arm:at91emac arm:cemac arm:epe arm:geminigmac arm:enet arm:cpsw arm:emac(omac) arm:emac(sunxi) arm:npe evbppc:temac macppc:bm macppc:gm mips:aumac mips:ae mips:cnmac mips:reth mips:sbmac playstation2:smap powerpc:tsec powerpc:emac(ibm4xx) sgimips:mec sparc:be sf ne(ax88190, dl10019) awge ep gem hme smsh mtd sm age alc ale bce cas et jme lii nfe pcn ste stge tl xi aue mue smsc udav url Not tested (PHY): amhphy bmtphy dmphy etphy glxtphy ikphy iophy lxtphy nsphyter pnaphy rdcphy sqphy tlphy tqphy urlphy
2019-01-22 06:42:24 +03:00
PHY_READ(sc, MII_BMCR, &reg);
if ((reg & BMCR_RESET) == 0)
break;
}
if (asc->rgmii_tx_internal_delay) {
PHY_WRITE(sc, ATPHY_DEBUG_PORT_ADDR, 0x05);
PHY_WRITE(sc, ATPHY_DEBUG_PORT_DATA, ATPHY_RGMII_TX_CLK_DLY);
}
if (asc->rgmii_rx_internal_delay) {
PHY_WRITE(sc, ATPHY_DEBUG_PORT_ADDR, 0x00);
PHY_WRITE(sc, ATPHY_DEBUG_PORT_DATA, ATPHY_RGMII_RX_CLK_DLY);
}
}
static int
atphy_mii_phy_auto(struct mii_softc *sc)
{
uint16_t anar;
sc->mii_ticks = 0;
anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA;
if (sc->mii_flags & MIIF_DOPAUSE)
anar |= ANAR_PAUSE_TOWARDS;
PHY_WRITE(sc, MII_ANAR, anar);
if (sc->mii_extcapabilities & (EXTSR_1000TFDX | EXTSR_1000THDX))
PHY_WRITE(sc, MII_100T2CR, GTCR_ADV_1000TFDX |
GTCR_ADV_1000THDX);
PHY_WRITE(sc, MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG);
return EJUSTRETURN;
}