NetBSD/sys/arch/hpcmips/conf/TX3912

#
# Distribution kernel (TOSHIBA TX3912 based model) kernel config file

#
#	$NetBSD: TX3912,v 1.39 2002/03/10 19:56:42 lukem Exp $
#
include		"arch/hpcmips/conf/std.hpcmips"

maxusers	16

include		"arch/hpcmips/conf/std.hpcmips.tx39"
options 	TX391X			# Product TMPR3912

options 	TX39_DEBUG
options 	TX39_WATCHDOGTIMER
#options 	TX39ICU_DEBUG
#options 	TX39CLOCK_DEBUG
#options 	TX39BIU_DEBUG
#options 	TX39POWER_DEBUG
#options 	TX39UART_DEBUG

options 	SERIALCONSSLOT=0	# UARTA 0, UARTB 1

options 	DDB			# in-kernel debugger
#options 	DDB_ONPANIC=0		# don't enter debugger on panic
options 	DIAGNOSTIC		# extra kernel debugging checks
options 	DEBUG			# extra kernel debugging support
options 	KTRACE			# system call tracing support
#options 	SYSCALL_DEBUG		# for debug
#options 	 MEMORY_DISK_SIZE=10000
options 	MSGBUFSIZE=65534	# for dmesg

#options 	MEMORY_DISK_HOOKS
#options 	MEMORY_DISK_IS_ROOT	# force root on memory disk
#options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
#options 	MEMORY_DISK_SIZE=12288	# size of memory disk, in blocks

options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)

options 	COMPAT_43

options 	SCSIVERBOSE	# human readable SCSI error messages
options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages

options 	NTP			# network time protocol
#options 	UCONSOLE		# users can redirect console (unsafe)

#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

# File systems
file-system 	FFS		# UFS
#file-system 	EXT2FS		# second extended file system (linux)
#file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
#file-system 	NULLFS		# loopback file system
#file-system 	OVERLAY		# overlay file system
#file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
#file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system
#file-system	CODA		# Coda File System; also needs vcoda (below)

# Networking options
#options 	GATEWAY		# IP packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/ IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# Multicast routing support
#options 	ISO		# OSI networking
#options 	TPIP		# TPIP
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25

options 	NFSSERVER	# Sun NFS-compatible filesystem (server)
options 	SOFTDEP		# FFS soft updates support.
#options 	QUOTA		# UFS quotas
options 	VNODE_OP_NOINLINE # don't inline vnode op calls

options 	NFS_BOOT_DHCP

# compile options
makeoptions	DEFGP="-G 14"

config		netbsd		root on ? type ?

# temporally power management
hpcapm0	at mainbus0			# power management
apmdev0	at hpcapm0			# APM

#
# System Internal Modules (TX391X specific)
#
tx3912video*	at txsim?
tx39ir*		at txcom1

#
# TX39 external modules. (Platform dependent)
#
options 	USE_POLL	# keyboard / touchpanel device requires this

# IO module manager (virtual bridge) DO NOT DELETE
txioman* at txsim?
# iochip 0 TX39 internal IO
#	 1 TX39 internal MFIO
#	 2 BETTY IO
#	(3 ITE IO notyet)
# edge  0 no interrupt.
# edge  1 positive edge
# edge  2 negative edge
# edge  3 both edge
# initial ... set initial state (on/off)
hpcioman3 at txioman? platform COMPAQ_C_2010
hpcout*	at hpcioman3 iochip 1 evtype POWER  id PWCTL_LED	port 3  initvalue 0
hpcin*	at hpcioman3 iochip 0 evtype BUTTON id BTN_REC		port 6  edge 1
hpcin*	at hpcioman3 iochip 0 evtype BUTTON id BTN_APP0		port 5  edge 1
hpcin*	at hpcioman3 iochip 1 evtype EVENT  id PME_AC		port 28 edge 1
hpcin*	at hpcioman3 iochip 1 evtype EVENT  id COM0_DCD		port 30 edge 3
hpcin*	at hpcioman3 iochip 1 evtype EVENT  id COM0_CTS		port 5  edge 3
hpcout*	at hpcioman3 iochip 1 evtype SET    id COM0_DTR		port 31
hpcout*	at hpcioman3 iochip 1 evtype SET    id COM0_RTS		port 6

hpcioman4 at txioman? platform COMPAQ_C_810
hpcout*	at hpcioman4 iochip 1 evtype POWER  id PWCTL_LED	port 3  initvalue 0
hpcin*	at hpcioman4 iochip 0 evtype BUTTON id BTN_REC		port 6  edge 1
hpcin*	at hpcioman4 iochip 0 evtype BUTTON id BTN_APP0		port 5  edge 1
hpcin*	at hpcioman4 iochip 1 evtype EVENT  id PME_AC		port 28 edge 1
hpcin*	at hpcioman4 iochip 1 evtype EVENT  id COM0_DCD		port 30 edge 3
hpcin*	at hpcioman4 iochip 1 evtype EVENT  id COM0_CTS		port 5  edge 3
hpcout*	at hpcioman4 iochip 1 evtype SET    id COM0_DTR		port 31
hpcout*	at hpcioman4 iochip 1 evtype SET    id COM0_RTS		port 6
hpcout*	at hpcioman4 iochip 2 evtype BUTTON id BTN_LIGHT	port 5

hpcioman5 at txioman? platform SHARP_MOBILON
hpcout*	at hpcioman5 iochip 1 evtype POWER  id PWCTL_LCDLIGHT	port 14
hpcin*	at hpcioman5 iochip 0 evtype BUTTON id BTN_REC		port 0  edge 1
hpcin*	at hpcioman5 iochip 1 evtype BUTTON id BTN_APP0		port 31 edge 1
hpcin*	at hpcioman5 iochip 1 evtype BUTTON id BTN_COVER	port 29 edge 1
#hpcin*	at hpcioman5 iochip 0 evtype EVENT  id COM0_CTS		port 4  edge 3 # DANGER
#hpcin*	at hpcioman5 iochip 0 evtype EVENT  id COM0_DCD		port 6  edge 3 # DANGER
hpcout*	at hpcioman5 iochip 0 evtype SET    id COM0_RTS		port 5
hpcout*	at hpcioman5 iochip 1 evtype SET    id COM0_DTR		port 15

# Chip select manager
txcsbus3	at tx39biu? platform COMPAQ_C
txcsbus4	at tx39biu? platform PHILIPS_NINO
txcsbus5	at tx39biu? platform SHARP_MOBILON
txcsbus*	at tx39biu?	# misc unknown.

# PHILIPS 74ALVC*1624? / TOSHIBA TC5165BFTS buffer chip (keyboard)
tc5165buf*	at txcsbus3 iocs 3 iocsbase 0 iocssize 0x100 iocswidth 16
tc5165buf*	at txcsbus5 iocs 4 iocsbase 0 iocssize 0x100 iocswidth 16
hpckbd*		at tc5165buf?

# ITE IT8368E PCMCIA / TOSHIBA TC6345AF buffer chip (PCMCIA)
# card/insert	... 3:2 (98)
# remove	... 5:8 (168)
options 	IT8368E_LEGACY_MODE	# Mobilon HC-4100 requires this
it8368e*	at txcsbus? regcs 2 regcsbase 0 regcssize 0x20 regcswidth 16 iocs 8 iocsbase 0 iocssize 0x4000000 iocswidth 16 irq1 98 irq2 168 irq3 98

# PHILIPS UCB1200 / TOSHIBA TC35413F (modem/audio analog front-end)
ucb*		at tx39sib? slot 0
ucbtp*		at ucb?
ucbsnd*		at ucb?
ucbio*		at ucb?

# WS console uses SUN or VT100 terminal emulation
hpcfb*		at tx3912video?
wsdisplay*	at hpcfb?
wskbd*		at hpckbd? mux 1
wsmouse*	at ucbtp? mux 0
btnmgr0		at mainbus0
wskbd*		at btnmgr0 mux 1

options 	WSEMUL_VT100
options 	WS_KERNEL_FG=WSCOL_BROWN
options 	WS_KERNEL_BG=WSCOL_BLUE
options 	WSDISPLAY_DEFAULTSCREENS=4
options 	FONT_VT220L8x10
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes

# PCMCIA bus support
pcmcia* at it8368e? controller ? socket ?

# PCMCIA IDE disk
wdc*	at pcmcia? function ?
wd*	at wdc? channel ? drive ? flags 0x0000

# ATAPI bus support
atapibus* at wdc? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
#uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown

# PCMCIA network interfaces
#awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS)
#cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer
#ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
#mbe*	at pcmcia? function ?		# MB8696x based Ethernet
#ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
#ray*	at pcmcia? function ?		# Raytheon Raylink (802.11)
#sm*	at pcmcia? function ?		# Megahertz Ethernet
#wi*	at pcmcia? function ?		# Lucent WaveLan IEEE (802.11)
#xe*	at pcmcia? function ?		# Xircom PCMCIA cards

#mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
#com*	at mhzc?
#sm*	at mhzc?

# PCMCIA serial interfaces
#com*	at pcmcia? function ?		# Modems and serial cards

#pcmcom*	at pcmcia? function ?		# PCMCIA multi-port serial cards
#com*	at pcmcom? slave ?		# ...and the slave devices

# PCMCIA SCSI interfaces
aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI

scsibus* at aic?
scsibus* at esp?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
#st*	at scsibus? target ? lun ?	# SCSI tape drives
#cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
#ch*	at scsibus? target ? lun ?	# SCSI autochangers
#ss*	at scsibus? target ? lun ?	# SCSI scanners
#uk*	at scsibus? target ? lun ?	# SCSI unknown

# disk/mass storage pseudo-devices
#pseudo-device	ccd		4	# concatenated disks
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
pseudo-device	md		1	# memory disk
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop		1	# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol

# mouse & keyboard multiplexor pseudo-devices
pseudo-device	wsmux

# a pseudo device needed for Coda	# also needs CODA (above)
#pseudo-device	vcoda		4	# coda minicache <-> venus comm.

# miscellaneous pseudo-devices
pseudo-device	rnd			# /dev/random and in-kernel generator
pseudo-device	pty			# pseudo-terminals

# for IPv6
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`#`
fix comment. 2000-04-27 23:38:23 +04:00			`# Distribution kernel (TOSHIBA TX3912 based model) kernel config file`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
			`#`
* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options are now consistently named * fold opt_mdsize.h into opt_md.h 2002-03-10 22:56:37 +03:00			`# $NetBSD: TX3912,v 1.39 2002/03/10 19:56:42 lukem Exp $`
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`#`
			`include "arch/hpcmips/conf/std.hpcmips"`

increase the value of maxusers to 16. 2001-11-21 14:28:09 +03:00			`maxusers 16`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
VR41XX/TX3922 common kernel. 2002-01-02 16:13:18 +03:00			`include "arch/hpcmips/conf/std.hpcmips.tx39"`
cosmetic change. 2000-03-25 18:12:04 +03:00			`options TX391X # Product TMPR3912`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
cosmetic change. 2000-03-25 18:12:04 +03:00			`options TX39_DEBUG`
			`options TX39_WATCHDOGTIMER`
clean up debug print and configuration. 2002-01-29 21:53:01 +03:00			`#options TX39ICU_DEBUG`
			`#options TX39CLOCK_DEBUG`
			`#options TX39BIU_DEBUG`
			`#options TX39POWER_DEBUG`
			`#options TX39UART_DEBUG`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
cosmetic change. 2000-03-25 18:12:04 +03:00			`options SERIALCONSSLOT=0 # UARTA 0, UARTB 1`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
cosmetic change. 2000-03-25 18:12:04 +03:00			`options DDB # in-kernel debugger`
add platform dependent TX39 UART module hook. remove delay from tc5165buf interrupt handler. backlight config_hook. 2000-01-17 00:47:00 +03:00			`#options DDB_ONPANIC=0 # don't enter debugger on panic`
cosmetic change. 2000-03-25 18:12:04 +03:00			`options DIAGNOSTIC # extra kernel debugging checks`
			`options DEBUG # extra kernel debugging support`
			`options KTRACE # system call tracing support`
add platform dependent TX39 UART module hook. remove delay from tc5165buf interrupt handler. backlight config_hook. 2000-01-17 00:47:00 +03:00			`#options SYSCALL_DEBUG # for debug`
* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options are now consistently named * fold opt_mdsize.h into opt_md.h 2002-03-10 22:56:37 +03:00			`#options MEMORY_DISK_SIZE=10000`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`options MSGBUFSIZE=65534 # for dmesg`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
UCB1200 GPIO routines. 2000-02-27 19:34:13 +03:00			`#options MEMORY_DISK_HOOKS`
			`#options MEMORY_DISK_IS_ROOT # force root on memory disk`
			`#options MEMORY_DISK_SERVER=0 # no userspace memory disk support`
* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options are now consistently named * fold opt_mdsize.h into opt_md.h 2002-03-10 22:56:37 +03:00			`#options MEMORY_DISK_SIZE=12288 # size of memory disk, in blocks`
UCB1200 GPIO routines. 2000-02-27 19:34:13 +03:00
TX39 IR module (connected to TX39 UARTB module) 2000-01-13 20:53:35 +03:00			`options PPP_BSDCOMP # BSD-Compress compression support for PPP`
			`options PPP_DEFLATE # Deflate compression support for PPP`
			`options PPP_FILTER # Active filter support for PPP (requires bpf)`

cosmetic change. 2000-03-25 18:12:04 +03:00			`options COMPAT_43`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
sync with skbd. 1999-12-08 18:54:11 +03:00			`options SCSIVERBOSE # human readable SCSI error messages`
cosmetic change. 2000-03-25 18:12:04 +03:00			`options PCMCIAVERBOSE # verbose PCMCIA configuration messages`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`options NTP # network time protocol`
			`#options UCONSOLE # users can redirect console (unsafe)`

add options PIPE_SOCKETPAIR to individual kernel configs the option is commented out on everything but kernels I was able to recognize as INSTALL-like or ones for small memory machines 2002-01-27 16:23:08 +03:00			`#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)`

add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`# File systems`
			`file-system FFS # UFS`
			`#file-system EXT2FS # second extended file system (linux)`
			`#file-system LFS # log-structured file system`
			`file-system MFS # memory file system`
			`file-system NFS # Network File System client`
			`#file-system CD9660 # ISO 9660 + Rock Ridge file system`
			`file-system MSDOSFS # MS-DOS file system`
			`file-system FDESC # /dev/fd`
			`file-system KERNFS # /kern`
			`#file-system NULLFS # loopback file system`
			`#file-system OVERLAY # overlay file system`
			`#file-system PORTAL # portal filesystem (still experimental)`
			`file-system PROCFS # /proc`
			`#file-system UMAPFS # NULLFS + uid and gid remapping`
			`file-system UNION # union file system`
			`#file-system CODA # Coda File System; also needs vcoda (below)`

TX3912/3922 support 1999-11-21 10:04:31 +03:00			`# Networking options`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`#options GATEWAY # IP packet forwarding`
			`options INET # IP + ICMP + TCP + UDP`
			`options INET6 # IPV6`
			`#options IPSEC # IP security`
			`#options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)`
			`#options IPSEC_DEBUG # debug for IP security`
			`#options MROUTING # Multicast routing support`
			`#options ISO # OSI networking`
			`#options TPIP # TPIP`
			`#options EON # OSI tunneling over IP`
			`#options CCITT,LLC,HDLC # X.25`

			`options NFSSERVER # Sun NFS-compatible filesystem (server)`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`options SOFTDEP # FFS soft updates support.`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`#options QUOTA # UFS quotas`
add 'options VNODE_OP_NOINLINE' to reduce size. 2000-09-27 14:22:22 +04:00			`options VNODE_OP_NOINLINE # don't inline vnode op calls`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00
			`options NFS_BOOT_DHCP`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
Adjusted GP size. 2002-01-26 13:24:58 +03:00			`# compile options`
decrease sbss,sdata section size. 2002-01-28 08:40:30 +03:00			`makeoptions DEFGP="-G 14"`
Adjusted GP size. 2002-01-26 13:24:58 +03:00
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`config netbsd root on ? type ?`

experimental power management support for TX3912/TX3922 based model. 2000-10-04 17:53:54 +04:00			`# temporally power management`
			`hpcapm0 at mainbus0 # power management`
			`apmdev0 at hpcapm0 # APM`

TX3912/3922 support 1999-11-21 10:04:31 +03:00			`#`
VR41XX/TX3922 common kernel. 2002-01-02 16:13:18 +03:00			`# System Internal Modules (TX391X specific)`
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`#`
cosmetic change. 2000-03-25 18:12:04 +03:00			`tx3912video* at txsim?`
			`tx39ir* at txcom1`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
			`#`
			`# TX39 external modules. (Platform dependent)`
			`#`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`options USE_POLL # keyboard / touchpanel device requires this`
add platform dependent TX39 UART module hook. remove delay from tc5165buf interrupt handler. backlight config_hook. 2000-01-17 00:47:00 +03:00
(TX39) switch from TX local I/O manager to hpcio 2001-06-13 23:09:07 +04:00			`# IO module manager (virtual bridge) DO NOT DELETE`
			`txioman* at txsim?`
			`# iochip 0 TX39 internal IO`
			`# 1 TX39 internal MFIO`
			`# 2 BETTY IO`
new I/O modules framework for TX based system. 2000-10-22 14:42:31 +04:00			`# (3 ITE IO notyet)`
			`# edge 0 no interrupt.`
			`# edge 1 positive edge`
			`# edge 2 negative edge`
			`# edge 3 both edge`
			`# initial ... set initial state (on/off)`
(TX39) switch from TX local I/O manager to hpcio 2001-06-13 23:09:07 +04:00			`hpcioman3 at txioman? platform COMPAQ_C_2010`
			`hpcout* at hpcioman3 iochip 1 evtype POWER id PWCTL_LED port 3 initvalue 0`
			`hpcin* at hpcioman3 iochip 0 evtype BUTTON id BTN_REC port 6 edge 1`
			`hpcin* at hpcioman3 iochip 0 evtype BUTTON id BTN_APP0 port 5 edge 1`
			`hpcin* at hpcioman3 iochip 1 evtype EVENT id PME_AC port 28 edge 1`
			`hpcin* at hpcioman3 iochip 1 evtype EVENT id COM0_DCD port 30 edge 3`
			`hpcin* at hpcioman3 iochip 1 evtype EVENT id COM0_CTS port 5 edge 3`
			`hpcout* at hpcioman3 iochip 1 evtype SET id COM0_DTR port 31`
			`hpcout* at hpcioman3 iochip 1 evtype SET id COM0_RTS port 6`

			`hpcioman4 at txioman? platform COMPAQ_C_810`
			`hpcout* at hpcioman4 iochip 1 evtype POWER id PWCTL_LED port 3 initvalue 0`
			`hpcin* at hpcioman4 iochip 0 evtype BUTTON id BTN_REC port 6 edge 1`
			`hpcin* at hpcioman4 iochip 0 evtype BUTTON id BTN_APP0 port 5 edge 1`
			`hpcin* at hpcioman4 iochip 1 evtype EVENT id PME_AC port 28 edge 1`
			`hpcin* at hpcioman4 iochip 1 evtype EVENT id COM0_DCD port 30 edge 3`
			`hpcin* at hpcioman4 iochip 1 evtype EVENT id COM0_CTS port 5 edge 3`
			`hpcout* at hpcioman4 iochip 1 evtype SET id COM0_DTR port 31`
			`hpcout* at hpcioman4 iochip 1 evtype SET id COM0_RTS port 6`
			`hpcout* at hpcioman4 iochip 2 evtype BUTTON id BTN_LIGHT port 5`

			`hpcioman5 at txioman? platform SHARP_MOBILON`
			`hpcout* at hpcioman5 iochip 1 evtype POWER id PWCTL_LCDLIGHT port 14`
			`hpcin* at hpcioman5 iochip 0 evtype BUTTON id BTN_REC port 0 edge 1`
			`hpcin* at hpcioman5 iochip 1 evtype BUTTON id BTN_APP0 port 31 edge 1`
			`hpcin* at hpcioman5 iochip 1 evtype BUTTON id BTN_COVER port 29 edge 1`
			`#hpcin* at hpcioman5 iochip 0 evtype EVENT id COM0_CTS port 4 edge 3 # DANGER`
			`#hpcin* at hpcioman5 iochip 0 evtype EVENT id COM0_DCD port 6 edge 3 # DANGER`
			`hpcout* at hpcioman5 iochip 0 evtype SET id COM0_RTS port 5`
			`hpcout* at hpcioman5 iochip 1 evtype SET id COM0_DTR port 15`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
add platform dependent TX39 UART module hook. remove delay from tc5165buf interrupt handler. backlight config_hook. 2000-01-17 00:47:00 +03:00			`# Chip select manager`
cosmetic change. 2000-03-25 18:12:04 +03:00			`txcsbus3 at tx39biu? platform COMPAQ_C`
			`txcsbus4 at tx39biu? platform PHILIPS_NINO`
			`txcsbus5 at tx39biu? platform SHARP_MOBILON`
			`txcsbus* at tx39biu? # misc unknown.`
sync with skbd. 1999-12-08 18:54:11 +03:00
add UCB1200 sound module ucbsnd (core implementation only) UCB1200 touch panel module moved to ucbtp and sync with vrpiu. 2000-01-12 17:56:17 +03:00			`# PHILIPS 74ALVC*1624? / TOSHIBA TC5165BFTS buffer chip (keyboard)`
cosmetic change. 2000-03-25 18:12:04 +03:00			`tc5165buf* at txcsbus3 iocs 3 iocsbase 0 iocssize 0x100 iocswidth 16`
			`tc5165buf* at txcsbus5 iocs 4 iocsbase 0 iocssize 0x100 iocswidth 16`
skbd -> hpckbd. hpckbd supports vrkiu as well as m38813c and tc5165. 2000-09-21 18:17:29 +04:00			`hpckbd* at tc5165buf?`
sync with skbd. 1999-12-08 18:54:11 +03:00
add UCB1200 sound module ucbsnd (core implementation only) UCB1200 touch panel module moved to ucbtp and sync with vrpiu. 2000-01-12 17:56:17 +03:00			`# ITE IT8368E PCMCIA / TOSHIBA TC6345AF buffer chip (PCMCIA)`
UCB1200 GPIO routines. 2000-02-27 19:34:13 +03:00			`# card/insert ... 3:2 (98)`
			`# remove ... 5:8 (168)`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`options IT8368E_LEGACY_MODE # Mobilon HC-4100 requires this`
cosmetic change. 2000-03-25 18:12:04 +03:00			`it8368e* at txcsbus? regcs 2 regcsbase 0 regcssize 0x20 regcswidth 16 iocs 8 iocsbase 0 iocssize 0x4000000 iocswidth 16 irq1 98 irq2 168 irq3 98`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
add UCB1200 sound module ucbsnd (core implementation only) UCB1200 touch panel module moved to ucbtp and sync with vrpiu. 2000-01-12 17:56:17 +03:00			`# PHILIPS UCB1200 / TOSHIBA TC35413F (modem/audio analog front-end)`
cosmetic change. 2000-03-25 18:12:04 +03:00			`ucb* at tx39sib? slot 0`
			`ucbtp* at ucb?`
			`ucbsnd* at ucb?`
			`ucbio* at ucb?`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
			`# WS console uses SUN or VT100 terminal emulation`
forgot to commit TX3912. 2000-05-02 22:00:54 +04:00			`hpcfb* at tx3912video?`
cosmetic change. 2000-03-25 18:12:04 +03:00			`wsdisplay* at hpcfb?`
skbd -> hpckbd. hpckbd supports vrkiu as well as m38813c and tc5165. 2000-09-21 18:17:29 +04:00			`wskbd* at hpckbd? mux 1`
cosmetic change. 2000-03-25 18:12:04 +03:00			`wsmouse* at ucbtp? mux 0`
			`btnmgr0 at mainbus0`
			`wskbd* at btnmgr0 mux 1`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
			`options WSEMUL_VT100`
implement 8bpp CLUT of Plum2, TX3912 video module. 2000-05-09 01:57:56 +04:00			`options WS_KERNEL_FG=WSCOL_BROWN`
			`options WS_KERNEL_BG=WSCOL_BLUE`
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`options WSDISPLAY_DEFAULTSCREENS=4`
			`options FONT_VT220L8x10`
Raw keyboard mode support. I'd tested this on MC/R530. I don't sure if skbd work or not. 2000-05-04 14:25:45 +04:00			`# compatibility to other console drivers`
			`options WSDISPLAY_COMPAT_PCVT # emulate some ioctls`
			`options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls`
			`options WSDISPLAY_COMPAT_USL # VT handling`
			`options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
			`# PCMCIA bus support`
			`pcmcia* at it8368e? controller ? socket ?`

			`# PCMCIA IDE disk`
			`wdc* at pcmcia? function ?`
			`wd* at wdc? channel ? drive ? flags 0x0000`

			`# ATAPI bus support`
			`atapibus* at wdc? channel ?`

add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`# ATAPI devices`
			`# flags have the same meaning as for IDE drives.`
			`cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives`
			`sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives`
			`#uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`# PCMCIA network interfaces`
			`#awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)`
			`#cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer`
			`#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet`
			`#mbe* at pcmcia? function ? # MB8696x based Ethernet`
			`#ne* at pcmcia? function ? # NE2000-compatible Ethernet`
			`#ray* at pcmcia? function ? # Raytheon Raylink (802.11)`
			`#sm* at pcmcia? function ? # Megahertz Ethernet`
			`#wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)`
			`#xe* at pcmcia? function ? # Xircom PCMCIA cards`

			`#mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards`
			`#com* at mhzc?`
			`#sm* at mhzc?`

			`# PCMCIA serial interfaces`
			`#com* at pcmcia? function ? # Modems and serial cards`

			`#pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards`
			`#com* at pcmcom? slave ? # ...and the slave devices`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
			`# PCMCIA SCSI interfaces`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`aic* at pcmcia? function ? # Adaptec APA-1460 SCSI`
			`esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI`

TX3912/3922 support 1999-11-21 10:04:31 +03:00			`scsibus* at aic?`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`scsibus* at esp?`

			`# SCSI devices`
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`sd* at scsibus? target ? lun ? # SCSI disk drives`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`#st* at scsibus? target ? lun ? # SCSI tape drives`
			`#cd* at scsibus? target ? lun ? # SCSI CD-ROM drives`
			`#ch* at scsibus? target ? lun ? # SCSI autochangers`
			`#ss* at scsibus? target ? lun ? # SCSI scanners`
			`#uk* at scsibus? target ? lun ? # SCSI unknown`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
p7416buf and tc5165buf are merged. 2000-01-07 18:19:12 +03:00			`# disk/mass storage pseudo-devices`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`#pseudo-device ccd 4 # concatenated disks`
			`#pseudo-device raid 4 # RAIDframe disk driver`
			`#options RAID_AUTOCONFIG # auto-configuration of RAID components`
p7416buf and tc5165buf are merged. 2000-01-07 18:19:12 +03:00			`pseudo-device md 1 # memory disk`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`pseudo-device vnd 4 # disk-like interface to files`
p7416buf and tc5165buf are merged. 2000-01-07 18:19:12 +03:00
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`# network pseudo-devices`
p7416buf and tc5165buf are merged. 2000-01-07 18:19:12 +03:00			`pseudo-device bpfilter 8 # Berkeley packet filter`
TX39 IR module (connected to TX39 UARTB module) 2000-01-13 20:53:35 +03:00			`pseudo-device ipfilter # IP filter (firewall) and NAT`
TX3912/3922 support 1999-11-21 10:04:31 +03:00			`pseudo-device loop 1 # network loopback`
p7416buf and tc5165buf are merged. 2000-01-07 18:19:12 +03:00			`pseudo-device ppp 2 # Point-to-Point Protocol`
TX3912/3922 support 1999-11-21 10:04:31 +03:00
p7416buf and tc5165buf are merged. 2000-01-07 18:19:12 +03:00			`# mouse & keyboard multiplexor pseudo-devices`
The wsmux pseudo device does not need a count anymore. 2001-11-13 20:54:46 +03:00			`pseudo-device wsmux`
sync with btnmgr change. 2000-03-12 18:28:12 +03:00
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00			`# a pseudo device needed for Coda # also needs CODA (above)`
			`#pseudo-device vcoda 4 # coda minicache <-> venus comm.`

			`# miscellaneous pseudo-devices`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`pseudo-device rnd # /dev/random and in-kernel generator`
don't specify number of ptys if >= 16 (current default initial number) pty comments: normalize and g/c what is no longer relevant 2000-09-24 19:59:26 +04:00			`pseudo-device pty # pseudo-terminals`
add rnd, IPV6 etc. 2000-04-09 18:14:50 +04:00
			`# for IPv6`
			`pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)`
			`#pseudo-device faith 1 # IPv[46] tcp relay translation i/f`