Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/pci/pucdata.c

1033 lines
30 KiB
C
Raw Normal View History

nuke trailing whitespace
2005-02-27 03:26:58 +03:00
/* $NetBSD: pucdata.c,v 1.40 2005/02/27 00:27:34 perry Exp $ */
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
/*
add code to cope with multiple ports per BAR, as are found, for instance, on the 8 port card Simon Gerraty has. In general, cards which have this lots of ports also have a separate interrupt status register, but this change is just to talk to the various ports independently. It works, but it's not optimal. (XXX still need a good name for the card in the comments, and to update the manual page.)
1999-02-06 09:29:54 +03:00
* Copyright (c) 1998, 1999 Christopher G. Demetriou. All rights reserved.
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PCI "universal" communications card driver configuration data (used to
* match/attach the cards).
*/
add RCSID
2001-11-13 10:48:40 +03:00
#include <sys/cdefs.h>
nuke trailing whitespace
2005-02-27 03:26:58 +03:00
__KERNEL_RCSID(0, "$NetBSD: pucdata.c,v 1.40 2005/02/27 00:27:34 perry Exp $");
add RCSID
2001-11-13 10:48:40 +03:00
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pucvar.h>
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
#include <dev/ic/comreg.h>
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
const struct puc_device_description puc_devices[] = {
Add config for the SUNIX line of pci serial/parallel cards. Approved by: Jason R. Thorpe <thorpej@wasabisystems.com>
2002-04-11 17:53:56 +04:00
/*
* SUNIX 40XX series of serial/parallel combo cards.
* Tested with 4055A and 4065A.
*/
{ "SUNIX 400X 1P",
{ 0x1409, 0x7168, 0x1409, 0x4000 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
{ "SUNIX 401X 2P",
{ 0x1409, 0x7168, 0x1409, 0x4010 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
{ "SUNIX 402X 1S",
{ 0x1409, 0x7168, 0x1409, 0x4020 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
},
},
{ "SUNIX 403X 2S",
{ 0x1409, 0x7168, 0x1409, 0x4030 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
},
},
{ "SUNIX 405X 4S",
{ 0x1409, 0x7168, 0x1409, 0x4050 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x14, 0x08, COM_FREQ},
},
},
{ "SUNIX 406X 8S",
{ 0x1409, 0x7168, 0x1409, 0x4060 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x14, 0x08, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ},
},
},
{ "SUNIX 407X 2S/1P",
{ 0x1409, 0x7168, 0x1409, 0x4070 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
{ "SUNIX 408X 2S/2P",
{ 0x1409, 0x7168, 0x1409, 0x4080 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
{ "SUNIX 409X 4S/2P",
{ 0x1409, 0x7168, 0x1409, 0x4090 },
{ 0xffff, 0xffff, 0xffff, 0xeff0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ},
{ PUC_PORT_TYPE_COM, 0x14, 0x08, COM_FREQ},
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
/*
* XXX no entry because I have no data:
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
* XXX Dolphin Peripherals 4006 (single parallel)
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
*/
/*
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
* Dolphin Peripherals 4014 (dual parallel port) card. PLX 9050, with
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
* into the subsystem fields, and claims that it's a
* network/misc (0x02/0x80) device.
*/
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
{ "Dolphin Peripherals 4014",
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
{ 0x10b5, 0x9050, 0xd84d, 0x6810 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x24, 0x00, 0x00 },
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
},
},
/*
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
* XXX Dolphin Peripherals 4025 (single serial)
* Add entry for Dolphin Peripherals 4036 dual-serial card. (Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may attach two serial units, but I cannot find one to test).
2001-11-26 03:41:24 +03:00
* (clashes with Dolphin Peripherals 4036 (2s variant)
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
*/
/*
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
* Dolphin Peripherals 4035 (dual serial port) card. PLX 9050, with
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
* a seemingly-lame EEPROM setup that puts the Dolphin IDs
* into the subsystem fields, and claims that it's a
* network/misc (0x02/0x80) device.
*/
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
{ "Dolphin Peripherals 4035",
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
{ 0x10b5, 0x9050, 0xd84d, 0x6808 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
},
},
* Add entry for Dolphin Peripherals 4036 dual-serial card. (Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may attach two serial units, but I cannot find one to test).
2001-11-26 03:41:24 +03:00
/*
* Dolphin Peripherals 4036 (dual serial port) card.
* (Dolpin 4025 has the same ID but only one port)
*/
{ "Dolphin Peripherals 4036",
{ 0x1409, 0x7168, 0x0, 0x0 },
{ 0xffff, 0xffff, 0x0, 0x0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8},
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8},
},
},
I went to Fry's and noticed a few more cards that probably will be supportable with this driver, but currently aren't supported. Add them.
1998-07-12 06:21:56 +04:00
/*
* XXX no entry because I have no data:
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 09:55:23 +04:00
* XXX Dolphin Peripherals 4078 (dual serial and single parallel)
I went to Fry's and noticed a few more cards that probably will be supportable with this driver, but currently aren't supported. Add them.
1998-07-12 06:21:56 +04:00
*/
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
I went to Fry's and noticed a few more cards that probably will be supportable with this driver, but currently aren't supported. Add them.
1998-07-12 06:21:56 +04:00
/*
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
* SIIG Boards.
*
* SIIG provides documentation for their boards at:
* <URL:http://www.siig.com/driver.htm>
*
* Please excuse the weird ordering, it's the order they
* use in their documentation.
I went to Fry's and noticed a few more cards that probably will be supportable with this driver, but currently aren't supported. Add them.
1998-07-12 06:21:56 +04:00
*/
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
/*
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
* SIIG "10x" family boards.
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
*/
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
/* SIIG Cyber Serial PCI 16C550 (10x family): 1S */
{ "SIIG Cyber Serial PCI 16C550 (10x family)",
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
{ 0x131f, 0x1000, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR1 },
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
},
},
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
/* SIIG Cyber Serial PCI 16C650 (10x family): 1S */
{ "SIIG Cyber Serial PCI 16C650 (10x family)",
{ 0x131f, 0x1001, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR1 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial PCI 16C850 (10x family): 1S */
{ "SIIG Cyber Serial PCI 16C850 (10x family)",
{ 0x131f, 0x1002, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR1 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber I/O PCI 16C550 (10x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C550 (10x family)",
{ 0x131f, 0x1010, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber I/O PCI 16C650 (10x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C650 (10x family)",
{ 0x131f, 0x1011, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber I/O PCI 16C850 (10x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C850 (10x family)",
{ 0x131f, 0x1012, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Parallel PCI (10x family): 1P */
{ "SIIG Cyber Parallel PCI (10x family)",
{ 0x131f, 0x1020, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Parallel Dual PCI (10x family): 2P */
{ "SIIG Cyber Parallel Dual PCI (10x family)",
{ 0x131f, 0x1021, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial Dual PCI 16C550 (10x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C550 (10x family)",
{ 0x131f, 0x1030, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR2 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR3 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial Dual PCI 16C650 (10x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C650 (10x family)",
{ 0x131f, 0x1031, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR2 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR3 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial Dual PCI 16C850 (10x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C850 (10x family)",
{ 0x131f, 0x1032, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR2 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR3 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2S1P PCI 16C550 (10x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C550 (10x family)",
{ 0x131f, 0x1034, 0, 0 }, /* XXX really? */
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR2 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR3 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2S1P PCI 16C650 (10x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C650 (10x family)",
{ 0x131f, 0x1035, 0, 0 }, /* XXX really? */
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR2 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR3 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2S1P PCI 16C850 (10x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C850 (10x family)",
{ 0x131f, 0x1036, 0, 0 }, /* XXX really? */
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR2 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR3 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 4S PCI 16C550 (10x family): 4S */
{ "SIIG Cyber 4S PCI 16C550 (10x family)",
{ 0x131f, 0x1050, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ * 8 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 4S PCI 16C650 (10x family): 4S */
{ "SIIG Cyber 4S PCI 16C650 (10x family)",
{ 0x131f, 0x1051, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ * 8 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 4S PCI 16C850 (10x family): 4S */
{ "SIIG Cyber 4S PCI 16C850 (10x family)",
{ 0x131f, 0x1052, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG10x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x24, 0x00, COM_FREQ * 8 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
I went to Fry's and noticed a few more cards that probably will be supportable with this driver, but currently aren't supported. Add them.
1998-07-12 06:21:56 +04:00
/*
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
* SIIG "20x" family boards.
I went to Fry's and noticed a few more cards that probably will be supportable with this driver, but currently aren't supported. Add them.
1998-07-12 06:21:56 +04:00
*/
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
/* SIIG Cyber Parallel PCI (20x family): 1P */
{ "SIIG Cyber Parallel PCI (20x family)",
{ 0x131f, 0x2020, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Parallel Dual PCI (20x family): 2P */
{ "SIIG Cyber Parallel Dual PCI (20x family)",
{ 0x131f, 0x2021, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2P1S PCI 16C550 (20x family): 1S, 2P */
{ "SIIG Cyber 2P1S PCI 16C550 (20x family)",
{ 0x131f, 0x2040, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2P1S PCI 16C650 (20x family): 1S, 2P */
{ "SIIG Cyber 2P1S PCI 16C650 (20x family)",
{ 0x131f, 0x2041, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2P1S PCI 16C850 (20x family): 1S, 2P */
{ "SIIG Cyber 2P1S PCI 16C850 (20x family)",
{ 0x131f, 0x2042, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
{ PUC_PORT_TYPE_LPT, 0x1c, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial PCI 16C550 (20x family): 1S */
{ "SIIG Cyber Serial PCI 16C550 (20x family)",
{ 0x131f, 0x2000, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial PCI 16C650 (20x family): 1S */
{ "SIIG Cyber Serial PCI 16C650 (20x family)",
{ 0x131f, 0x2001, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial PCI 16C850 (20x family): 1S */
{ "SIIG Cyber Serial PCI 16C850 (20x family)",
{ 0x131f, 0x2002, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber I/O PCI 16C550 (20x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C550 (20x family)",
{ 0x131f, 0x2010, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber I/O PCI 16C650 (20x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C650 (20x family)",
{ 0x131f, 0x2011, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber I/O PCI 16C850 (20x family): 1S, 1P */
{ "SIIG Cyber I/O PCI 16C850 (20x family)",
{ 0x131f, 0x2012, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x14, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial Dual PCI 16C550 (20x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C550 (20x family)",
{ 0x131f, 0x2030, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR1 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial Dual PCI 16C650 (20x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C650 (20x family)",
{ 0x131f, 0x2031, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR1 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber Serial Dual PCI 16C850 (20x family): 2S */
{ "SIIG Cyber Serial Dual PCI 16C850 (20x family)",
{ 0x131f, 0x2032, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR1 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2S1P PCI 16C550 (20x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C550 (20x family)",
{ 0x131f, 0x2060, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR1 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2S1P PCI 16C650 (20x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C650 (20x family)",
{ 0x131f, 0x2061, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR1 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 2S1P PCI 16C850 (20x family): 2S, 1P */
{ "SIIG Cyber 2S1P PCI 16C850 (20x family)",
{ 0x131f, 0x2062, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR1 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 4S PCI 16C550 (20x family): 4S */
{ "SIIG Cyber 4S PCI 16C550 (20x family)",
{ 0x131f, 0x2050, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 4S PCI 16C650 (20x family): 4S */
{ "SIIG Cyber 4S PCI 16C650 (20x family)",
{ 0x131f, 0x2051, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
/* SIIG Cyber 4S PCI 16C850 (20x family): 4S */
{ "SIIG Cyber 4S PCI 16C850 (20x family)",
{ 0x131f, 0x2052, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
},
},
Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790.
2002-08-02 14:40:30 +04:00
/* SIIG Cyber PS8000 PCI 16C650 (20x family): 8S - 32 Byte FIFOs */
{ "SIIG PS8000 8S PCI 16C650 (20x family)",
{ 0x131f, 0x2081, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Enable the 8X clock on the SIIG Cyberserial serial and combination PCI cards at attachment time, in order to support bit rates greater than 115K, as discussed on tech-kern.
2004-02-03 22:51:39 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00,
(COM_FREQ * 8)|PUC_COM_SIIG20x|PUC_PORT_USR0 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x18, COM_FREQ * 8 },
Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790.
2002-08-02 14:40:30 +04:00
},
},
Add the dual-serial VScom PCI-200 adapter. Tested by Jukka Salmi.
2004-10-16 22:05:19 +04:00
/* VScom PCI-200: 2S */
{ "VScom PCI-200",
{ 0x10b5, 0x1103, 0x10b5, 0x1103 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 8 },
},
},
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
/* VScom PCI-400: 4S */
{ "VScom PCI-400",
{ 0x10b5, 0x1077, 0x10b5, 0x1077 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 8 },
},
},
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37). This means that all SIIG PCI serial/parallel cards (described on their web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 09:38:05 +04:00
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
/* VScom PCI-800: 8S */
put in better name/description for Simon G's board
1999-02-06 09:55:15 +03:00
{ "VScom PCI-800",
add code to cope with multiple ports per BAR, as are found, for instance, on the 8 port card Simon Gerraty has. In general, cards which have this lots of ports also have a separate interrupt status register, but this change is just to talk to the various ports independently. It works, but it's not optimal. (XXX still need a good name for the card in the comments, and to update the manual page.)
1999-02-06 09:29:54 +03:00
{ 0x10b5, 0x1076, 0x10b5, 0x1076 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x20, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x28, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x30, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x38, COM_FREQ * 8 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
},
},
add Boca Research 4- and 8-port cards. from openbsd.
2002-10-29 11:59:36 +03:00
Support for the VS-Com PCI-210H 2s/1p card, from PR 18478.
2004-07-04 14:02:03 +04:00
{ "Titan PCI-010HV2",
{ 0x14d2, 0xe001, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
{ "Titan PCI-200HV2",
{ 0x14d2, 0xe020, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8 },
},
},
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
/*
* VScom PCI-800H. Uses 8 16950 UART, behind a PCI chips that offers
* 4 com port on PCI device 0 and 4 on PCI device 1. PCI device 0 has
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
* device ID 3 and PCI device 1 device ID 4.
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
*/
Looks like "VSCom PCI-800H" should be in fact "Titan PCI-800H".
2001-03-13 20:23:52 +03:00
{ "Titan PCI-800H",
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ 0x14d2, 0xa003, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 8 },
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
},
},
Looks like "VSCom PCI-800H" should be in fact "Titan PCI-800H".
2001-03-13 20:23:52 +03:00
{ "Titan PCI-800H",
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ 0x14d2, 0xa004, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ * 8 },
add code to cope with multiple ports per BAR, as are found, for instance, on the 8 port card Simon Gerraty has. In general, cards which have this lots of ports also have a separate interrupt status register, but this change is just to talk to the various ports independently. It works, but it's not optimal. (XXX still need a good name for the card in the comments, and to update the manual page.)
1999-02-06 09:29:54 +03:00
},
},
Add Titan 200H (from Wojciech Puchar)
2001-11-18 23:20:25 +03:00
{ "Titan PCI-200H",
{ 0x14d2, 0xa005, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ * 8 },
},
},
Support Titan PCI-800L, a 8 serial puc card, from PR 17140. Reviewed/approved by veego@ and martin@.
2002-06-02 22:43:27 +04:00
{ "Titan PCI-800L",
{ 0x14d2, 0x8080, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x08, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x10, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x18, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x20, COM_FREQ * 8 },
{ PUC_PORT_TYPE_COM, 0x20, 0x28, COM_FREQ * 8 },
},
},
Commit patch kern/8778 Subject: NEC PCI modem support
1999-11-16 06:15:17 +03:00
/* NEC PK-UG-X001 K56flex PCI Modem card.
NEC MARTH bridge chip and Rockwell RCVDL56ACF/SP using. */
{ "NEC PK-UG-X001 K56flex PCI Modem",
{ 0x1033, 0x0074, 0x1033, 0x8014 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
Commit patch kern/8778 Subject: NEC PCI modem support
1999-11-16 06:15:17 +03:00
},
},
Add support for the PCI-400 card and correct the clock rate for all the VScom/Titan cards.
2001-08-07 02:25:36 +04:00
/* NEC PK-UG-X008 */
Commit patch kern/8778 Subject: NEC PCI modem support
1999-11-16 06:15:17 +03:00
{ "NEC PK-UG-X008",
{ 0x1033, 0x007d, 0x1033, 0x8012 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed. Thanks to Bernd Ernesti for pointing this out.
2001-01-04 14:34:27 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ},
Commit patch kern/8778 Subject: NEC PCI modem support
1999-11-16 06:15:17 +03:00
},
},
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 08:43:44 +03:00
/* Lava Computers 2SP-PCI */
{ "Lava Computers 2SP-PCI parallel port",
{ 0x1407, 0x8000, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Add a 'flag' member to struct puc_attach_args and struct port. For PUC_PORT_TYPE_COM, use it to store the clock frequency (with 8 lower bits to 0, used for real flags if needed). Update all descriptions to set flags to 0 for LPT or COM_FREQ for COM. Add support for the VScom PCI-800H 8 port serial adapter (which uses a 14.7456 Mhz crystal instead of the standart 1.8432Mhz :) XXX now that we can pass other frequency than COM_FREQ, the VScom PCI-800 entry could probably be updated to DTRT - does anyone have one ?
2001-01-03 18:13:15 +03:00
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 08:43:44 +03:00
},
},
/* Lava Computers 2SP-PCI and Quattro-PCI serial ports */
{ "Lava Computers dual serial port",
{ 0x1407, 0x0100, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed. Thanks to Bernd Ernesti for pointing this out.
2001-01-04 14:34:27 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
Add another Lava serial board.
2001-07-05 02:39:11 +04:00
},
},
/* Lava Computers DSerial PCI serial ports */
{ "Lava Computers serial port",
{ 0x1407, 0x0110, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
Add support for Lava Computers MFG 2sp-pci and quattro cards.
1999-12-04 08:43:44 +03:00
},
},
add entry for Lava Quattro-PCI (4 port serial) contributed in PR kern/22977 by Heison Chak
2003-09-28 11:22:01 +04:00
/* Lava Computers Quattro-PCI serial ports */
{ "Lava Quattro-PCI 4-port serial",
{ 0x1407, 0x0120, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
PR/12204: Andreas Wrede: Add support for Lava 8-port serial card.
2001-02-14 18:07:28 +03:00
/* Lava Computers Octopus-550 serial ports */
{ "Lava Computers Octopus-550 8-port serial",
{ 0x1407, 0x0180, 0, 0 },
{ 0xffff, 0xfffc, 0, 0 },
{
make this compile again.
2001-02-15 00:10:20 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
PR/12204: Andreas Wrede: Add support for Lava 8-port serial card.
2001-02-14 18:07:28 +03:00
},
},
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 19:26:23 +03:00
/* US Robotics (3Com) PCI Modems */
{ "US Robotics (3Com) 3CP5609 PCI 16550 Modem",
{ 0x12b9, 0x1008, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed. Thanks to Bernd Ernesti for pointing this out.
2001-01-04 14:34:27 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 19:26:23 +03:00
},
},
Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth.
2000-09-06 19:27:37 +04:00
/* Actiontec 56K PCI Master */
{ "Actiontec 56K PCI Master",
{ 0x11c1, 0x0480, 0x0, 0x0 },
{ 0xffff, 0xffff, 0x0, 0x0 },
{
Ops, add COM_FREQ to a few PUC_PORT_TYPE_COM I missed. Thanks to Bernd Ernesti for pointing this out.
2001-01-04 14:34:27 +03:00
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
Add definition for "Actiontec 56K PCI Master", from Bill Hudspeth.
2000-09-06 19:27:37 +04:00
},
},
Add support for boards with an Oxford Semiconductor chip. This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. XXX We need to move the PCI IDs to pcidevs.
2001-01-04 11:43:21 +03:00
/*
* Boards with an Oxford Semiconductor chip.
*
* Oxford Semiconductor provides documentation for their chip at:
* <URL:http://www.oxsemi.com/products/uarts/index.html>
*
* As sold by Kouwell <URL:http://www.kouwell.com/>.
* I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports.
*/
Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790.
2002-08-02 14:40:30 +04:00
/* Oxford Semiconductor OX16PCI952 PCI `950 UARTs - 128 byte FIFOs */
{ "Oxford Semiconductor OX16PCI952 UARTs",
{ 0x1415, 0x9521, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
},
},
/* Oxford Semiconductor OX16PCI952 PCI Parallel port */
{ "Oxford Semiconductor OX16PCI952 Parallel port",
{ 0x1415, 0x9523, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
Add support for boards with an Oxford Semiconductor chip. This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. XXX We need to move the PCI IDs to pcidevs.
2001-01-04 11:43:21 +03:00
/* Oxford Semiconductor OX16PCI954 PCI UARTs */
Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790.
2002-08-02 14:40:30 +04:00
{ "Oxford Semiconductor OX16PCI954 UARTs",
Add support for boards with an Oxford Semiconductor chip. This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. XXX We need to move the PCI IDs to pcidevs.
2001-01-04 11:43:21 +03:00
{ 0x1415, 0x9501, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
Use COM_FREQ for COM part of the last commited entry. Why are there other drivers here which have PUC_PORT_TYPE_COM but don't use COM_FREQ or even don't have the extra field?
2001-01-04 11:49:31 +03:00
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x10, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x10, 0x18, COM_FREQ },
Add support for boards with an Oxford Semiconductor chip. This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. XXX We need to move the PCI IDs to pcidevs.
2001-01-04 11:43:21 +03:00
},
},
/* Oxford Semiconductor OX16PCI954 PCI Parallel port */
Add Siig 20x 8 ports and and Oxford x952 cards. From Paul Shupak in kern/17790.
2002-08-02 14:40:30 +04:00
{ "Oxford Semiconductor OX16PCI954 Parallel port",
Add support for boards with an Oxford Semiconductor chip. This one was an I/O Flex PCI I/O Card Model-223 with 4 serial and 1 parallel ports. XXX We need to move the PCI IDs to pcidevs.
2001-01-04 11:43:21 +03:00
{ 0x1415, 0x9513, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
Add support for NetMos NM9805 1284 Printer port. Tested by David Kwok <dkwok@iware.com.au>.
2002-05-13 13:19:57 +04:00
/* NetMos 1P PCI : 1P */
{ "NetMos NM9805 1284 Printer port",
{ 0x9710, 0x9805, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
},
},
add entry for another NetMos card - NetMos NM9815 Dual 1284 Printer port
2003-12-06 14:18:08 +03:00
/* NetMos 2P PCI : 2P */
{ "NetMos NM9815 Dual 1284 Printer port",
{ 0x9710, 0x9815, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_LPT, 0x10, 0x00, 0x00 },
fix register offset of second port for NetMos NM9815 Dual 1284 Printer port card
2004-01-25 14:48:27 +03:00
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
add entry for another NetMos card - NetMos NM9815 Dual 1284 Printer port
2003-12-06 14:18:08 +03:00
},
},
add support for NetMos NM9835 Dual UART and 1284 Printer port.
2001-03-05 00:30:24 +03:00
/* NetMos 2S1P PCI 16C650 : 2S, 1P */
{ "NetMos NM9835 Dual UART and 1284 Printer port",
{ 0x9710, 0x9835, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_LPT, 0x18, 0x00, 0x00 },
},
},
Support NetMos NM9845 Quad UART and 1284 Printer port. All 4 serial ports and parallel port seem to work.
2002-05-24 16:07:46 +04:00
/* NetMos 4S1P PCI NM9845 : 4S, 1P */
{ "NetMos NM9845 Quad UART and 1284 Printer port",
{ 0x9710, 0x9845, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_LPT, 0x20, 0x00, 0x00 },
},
},
Add the serial port on the Middle Digital, Inc. PCI Weasel.
2001-12-17 01:22:04 +03:00
/*
* This is the Middle Digital, Inc. PCI-Weasel, which
* uses a PCI interface implemented in FPGA.
*/
Fix a minor typo.
2001-12-17 01:23:01 +03:00
{ "Middle Digital, Inc. Weasel serial port",
Add the serial port on the Middle Digital, Inc. PCI Weasel.
2001-12-17 01:22:04 +03:00
{ 0xdeaf, 0x9051, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
},
},
Add an entry for Avlab Technology, Inc. Low Profile PCI 4 Serial (in Japan, sold by Kuroutoshikou as SERIAL4P-LPPCI.)
2002-07-05 18:10:32 +04:00
/* Avlab Technology, Inc. Low Profile PCI 4 Serial: 4S */
{ "Avlab Low Profile PCI 4 Serial",
{ 0x14db, 0x2150, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x10, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
},
},
add Boca Research 4- and 8-port cards. from openbsd.
2002-10-29 11:59:36 +03:00
/*
* Boca Research Turbo Serial 654 (4 serial port) card.
* Appears to be the same as Chase Research PLC PCI-FAST4
* and Perle PCI-FAST4 Multi-Port serial cards.
*/
{ "Boca Research Turbo Serial 654",
{ 0x10b5, 0x9050, 0x12e0, 0x0031 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 4 },
nuke trailing whitespace
2005-02-27 03:26:58 +03:00
},
add Boca Research 4- and 8-port cards. from openbsd.
2002-10-29 11:59:36 +03:00
},
/*
* Boca Research Turbo Serial 658 (8 serial port) card.
* Appears to be the same as Chase Research PLC PCI-FAST8
* and Perle PCI-FAST8 Multi-Port serial cards.
*/
{ "Boca Research Turbo Serial 658",
{ 0x10b5, 0x9050, 0x12e0, 0x0021 },
{ 0xffff, 0xffff, 0xffff, 0xffff },
{
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x10, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x18, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x20, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x28, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x30, COM_FREQ * 4 },
{ PUC_PORT_TYPE_COM, 0x18, 0x38, COM_FREQ * 4 },
},
},
support ADDI-DATA APCI-7800 8-port serial adapter
2004-10-13 18:15:16 +04:00
/*
* Addi-Data APCI-7800 8-port serial card.
* Uses an AMCC chip as PCI bridge.
*/
{ "Addi-Data APCI-7800",
{ 0x10e8, 0x818e, 0, 0 },
{ 0xffff, 0xffff, 0, 0 },
{
{ PUC_PORT_TYPE_COM, 0x14, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x14, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x18, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x1c, 0x08, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x20, 0x00, COM_FREQ },
{ PUC_PORT_TYPE_COM, 0x20, 0x08, COM_FREQ },
},
},
add a driver for "PCI 'universal' communications" cards, that is, PCI cards which contain 'standard' com- and lpt-type ports. Some of these present as PCI simple-communications/serial or simple-communications/parallel devices, but many do not. (Additionally, there is no document that I can find that describes the "specific well-konwn register-level" description of how the 'standard' devices' config space headers shold work.) Eventually, some of the devices driven by this code should become simple pci attachments for the 'lpt' and 'com' drivers, but that requires solid documentation.
1998-06-26 22:52:41 +04:00
{ 0 }
};