Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/scsipi/sdvar.h

123 lines
4.6 KiB
C
Raw Normal View History

Add ioctls to get (DIOCGCACHE) and set (DIOCSCACHE) cache enables on disks in a generic way. Implement these ioctls for SCSI disks. This is not fully fleshed-out yet, but it allows people to experiment with disk caches more easily.
2002-01-09 07:12:11 +03:00
/* $NetBSD: sdvar.h,v 1.16 2002/01/09 04:12:12 thorpej Exp $ */
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
Assign my copyrights to TNF.
1998-08-17 04:49:01 +04:00
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum.
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
Assign my copyrights to TNF.
1998-08-17 04:49:01 +04:00
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
*
Assign my copyrights to TNF.
1998-08-17 04:49:01 +04:00
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
*/
/*
* Originally written by Julian Elischer (julian@dialix.oz.au)
* for TRW Financial Systems for use under the MACH(2.5) operating system.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@dialix.oz.au) Sept 1992
*/
Make SDRETRIES an option you can dig out of opt_scsi.h. Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the normal 60 * 1000 timeout for normal read/write commamds. This allows you to shorten or lengthen the timeout as needed.
2001-05-22 22:59:57 +04:00
#include "opt_scsi.h"
include "rnd.h" explicitely since the size of sd_softc depends on it (sd_scsi.c and sd_atapi.c missed it, leading to random memory corruption)
2000-01-22 19:35:25 +03:00
#include "rnd.h"
#if NRND > 0
#include <sys/rnd.h>
#endif
Make SDRETRIES an option you can dig out of opt_scsi.h. Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the normal 60 * 1000 timeout for normal read/write commamds. This allows you to shorten or lengthen the timeout as needed.
2001-05-22 22:59:57 +04:00
#ifndef SDRETRIES
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
#define SDRETRIES 4
Make SDRETRIES an option you can dig out of opt_scsi.h. Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the normal 60 * 1000 timeout for normal read/write commamds. This allows you to shorten or lengthen the timeout as needed.
2001-05-22 22:59:57 +04:00
#endif
#ifndef SD_IO_TIMEOUT
fix typo in previous revision so that the scsi code compiles again.
2001-05-23 06:16:19 +04:00
#define SD_IO_TIMEOUT (60 * 1000)
Make SDRETRIES an option you can dig out of opt_scsi.h. Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the normal 60 * 1000 timeout for normal read/write commamds. This allows you to shorten or lengthen the timeout as needed.
2001-05-22 22:59:57 +04:00
#endif
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
struct sd_ops;
struct sd_softc {
struct device sc_dev;
struct disk sc_dk;
int flags;
#define SDF_LOCKED 0x01
#define SDF_WANTED 0x02
#define SDF_WLABEL 0x04 /* label is writable */
#define SDF_LABELLING 0x08 /* writing label */
#define SDF_ANCIENT 0x10 /* disk is ancient; for minphys */
Keep track if the disk has had done i/o, making it dirty. On last close, or at shutdown, flush the cache if the disk is still dirty and it support cache flushing. Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 05:10:54 +04:00
#define SDF_DIRTY 0x20 /* disk is dirty; needs cache flush */
#define SDF_FLUSHING 0x40 /* flushing, for sddone() */
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
struct scsipi_periph *sc_periph;/* contains our targ, lun, etc. */
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
struct disk_parms {
u_long heads; /* number of heads */
u_long cyls; /* number of cylinders */
u_long sectors; /* number of sectors/track */
u_long blksize; /* number of bytes/sector */
u_long disksize; /* total number sectors */
u_long rot_rate; /* rotational rate, in RPM */
} params;
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
Update for sys/buf.h/disksort_*() changes.
2000-01-22 02:39:55 +03:00
struct buf_queue buf_queue;
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
u_int8_t type;
Improve generation of default disklabels: -store printable product ID in cd's and sd's softc, use it as "typename" -for this, add a "destination buffer length" argument to scsipi_strvis() -return ATAPI device type for ATAPI devices
1998-08-05 20:29:04 +04:00
char name[16]; /* product name, for default disklabel */
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
const struct sd_ops *sc_ops; /* our bus-dependent ops vector */
Add a shutdown hook for SCSI-2 and higher disks that issues a SYNCHRONIZE CACHE operation with address 0 length 0, which, according to the SCSI-2 spec, should be interpreted as "synchronize all remaining blocks beginning at address 0".
1998-06-11 02:17:39 +04:00
void *sc_sdhook; /* our shutdown hook */
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
#if NRND > 0
rndsource_element_t rnd_source;
#endif
};
struct sd_ops {
int (*sdo_get_parms) __P((struct sd_softc *, struct disk_parms *,
int));
Make `sc_ops->sdo_flush' synchronous. The flags `SDF_FLUSHING' and `SDF_DIRTY' were never reset because `sddone' doesn't get called from synchronous scsi commands.
1999-08-26 13:28:17 +04:00
int (*sdo_flush) __P((struct sd_softc *, int));
Add ioctls to get (DIOCGCACHE) and set (DIOCSCACHE) cache enables on disks in a generic way. Implement these ioctls for SCSI disks. This is not fully fleshed-out yet, but it allows people to experiment with disk caches more easily.
2002-01-09 07:12:11 +03:00
int (*sdo_getcache) __P((struct sd_softc *, int *));
int (*sdo_setcache) __P((struct sd_softc *, int));
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
};
#define SDGP_RESULT_OK 0 /* paramters obtained */
#define SDGP_RESULT_OFFLINE 1 /* no media, or otherwise losing */
#define SDGP_RESULT_UNFORMATTED 2 /* unformatted media (max params) */
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
void sdattach __P((struct device *, struct sd_softc *, struct scsipi_periph *,
add support for an ATAPI attachment for 'sd'. fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!) clean up in various ways: * make common atapi_mode_{sense,select}() functions. * put ATAPI data structures in more sensible headers, split up by device type. * include headers a bit more carefully. * pass flags to attachment-specific cd functions, and use them. * get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move them into the correct place in scsi_base.c. * fix minor typo in struct name in scsipiconf.h (which was apparently never used except in a #define later in the same file). * use __attribute__ to force 4-byte alignment for xs command store, so that architectures trying to bus_space_write_multi_N() (where N > 1) that data to a controller won't lose. * clean up a few comments in typos, and make a few #defines easier to understand/maintain. * rename cd_link.h to cdvar.h (via repository copy). This is exactly what a 'var' file is supposed to be.
1998-01-15 05:21:27 +03:00
const struct sd_ops *));
Implement detaching SCSI and ATAPI disks.
1999-09-12 01:42:58 +04:00
int sdactivate __P((struct device *, enum devact));
int sddetach __P((struct device *, int));