NetBSD/sys/arch/pc532/conf/STEELHEAD

#	$NetBSD: STEELHEAD,v 1.11 1996/01/25 19:36:36 phil Exp $
#
# STEELHEAD: Phil Nelson's pc532
#
machine		"pc532"

maxusers	10			# estimated number of users
options		TIMEZONE=0, DST=0	# time zone to read RTC in
options		SWAPPAGER		# paging
options		VNODEPAGER,DEVPAGER	# vnode and device node caching
#options	DDB			# kernel debugger; not working
#options	DIAGNOSTIC		# internal consistency checking

#options	ACCOUNTING		# process accounting
options		KTRACE			# system call tracing, a la ktrace(1)
options		FIFO			# fifos; recommended
#options	SYSVSHM			# System V shared memory; broken
#options	"SHMMAXPGS=1024"
#options	LKM			# loadable kernel modules

# compatibility options
options		"COMPAT_43"		# 4.3 system calls
options		"TCP_COMPAT_42"		# 4.2 networking ABI
options		"COMPAT_09"		# NetBSD-0.9
options		"COMPAT_10"		# NetBSD-1.0

# file system options
#options	QUOTA			# file system quotas
options		FFS			# Berkeley fast file system
#options	FASTLINKS		# fast symbolic links in FFS
#options	MFS			# memory file system; uses RAM and swap
options		NFSSERVER		# Network File System server
options		NFSCLIENT		# Network File System client
#options	ISOFS			# ISO 9660 CD-ROM file system, with RR
#options	MSDOSFS			# MS-DOS FAT file system
options		FDESC			# /dev/fd
options		KERNFS			# kernel file system; recommended

# networking options
#options	GATEWAY			# packet forwarding
options		INET			# IP
#options	NS			# XNS
#options	CCITT			# X.25
#options	ISO			# OSI
#options	TPIP			# ?
#options	EON			# ?

# pc532 specific options
options		"CONSOLE_SPEED=B19200"	# default baud on the console (tty00)
#options	"RAMD_SIZE=1536000"	# Size of the "boot strap ram disk"
#options	"RAMD_ADR=0x400000"	# Adr of the "boot strap ram disk"
options		"CONFIG_NEW"		# Use config.new stuff
options		"DEV_RTC"		# /dev/rtc access to hardware clock
options		"CON_BRK_PANIC"		# 3 breaks on tty0 -> panic? y/n

config		"netbsd"	root on sd0 swap on sd0 and sd1 and vnd0a

membus0 at root

#rd0 at membus?

#ncr0 at membus?
oldncr0 at membus?

scsibus0 at scsi?

sd* at scsibus? target ? lun ?			# SCSI disks
st* at scsibus? target ? lun ?			# SCSI tapes
#cd* at scsibus? target ? lun ?			# SCSI ???

scn0 at membus?
scn1 at membus?
scn2 at membus?
scn3 at membus?
scn4 at membus?
scn5 at membus?
scn6 at membus?
scn7 at membus?

pseudo-device	pty 16			# pseudo-terminals
pseudo-device	loop 1			# loopback network
pseudo-device	bpfilter 4		# packet filter
pseudo-device	sl 3			# compressed SLIP
pseudo-device	ppp 2			# Point-to-Point Protocol
pseudo-device   vnd 4			# Vnode devices
#pseudo-device	ether			#
Update a bit. 1996-01-25 22:36:36 +03:00			`# $NetBSD: STEELHEAD,v 1.11 1996/01/25 19:36:36 phil Exp $`
configuration name changes, cleanup on the Makefile 1994-05-03 11:26:59 +04:00			`#`
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00			`# STEELHEAD: Phil Nelson's pc532`
configuration name changes, cleanup on the Makefile 1994-05-03 11:26:59 +04:00			`#`
			`machine "pc532"`
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00
			`maxusers 10 # estimated number of users`
			`options TIMEZONE=0, DST=0 # time zone to read RTC in`
			`options SWAPPAGER # paging`
			`options VNODEPAGER,DEVPAGER # vnode and device node caching`
			`#options DDB # kernel debugger; not working`
			`#options DIAGNOSTIC # internal consistency checking`

			`#options ACCOUNTING # process accounting`
			`options KTRACE # system call tracing, a la ktrace(1)`
			`options FIFO # fifos; recommended`
			`#options SYSVSHM # System V shared memory; broken`
			`#options "SHMMAXPGS=1024"`
			`#options LKM # loadable kernel modules`

			`# compatibility options`
			`options "COMPAT_43" # 4.3 system calls`
			`options "TCP_COMPAT_42" # 4.2 networking ABI`
			`options "COMPAT_09" # NetBSD-0.9`
			`options "COMPAT_10" # NetBSD-1.0`

			`# file system options`
			`#options QUOTA # file system quotas`
			`options FFS # Berkeley fast file system`
			`#options FASTLINKS # fast symbolic links in FFS`
			`#options MFS # memory file system; uses RAM and swap`
			`options NFSSERVER # Network File System server`
			`options NFSCLIENT # Network File System client`
			`#options ISOFS # ISO 9660 CD-ROM file system, with RR`
			`#options MSDOSFS # MS-DOS FAT file system`
			`options FDESC # /dev/fd`
			`options KERNFS # kernel file system; recommended`

			`# networking options`
			`#options GATEWAY # packet forwarding`
			`options INET # IP`
			`#options NS # XNS`
			`#options CCITT # X.25`
			`#options ISO # OSI`
			`#options TPIP # ?`
			`#options EON # ?`

			`# pc532 specific options`
Update a bit. 1996-01-25 22:36:36 +03:00			`options "CONSOLE_SPEED=B19200" # default baud on the console (tty00)`
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00			`#options "RAMD_SIZE=1536000" # Size of the "boot strap ram disk"`
			`#options "RAMD_ADR=0x400000" # Adr of the "boot strap ram disk"`
			`options "CONFIG_NEW" # Use config.new stuff`
Move to config.new, add lpt driver. 1995-01-18 11:13:29 +03:00			`options "DEV_RTC" # /dev/rtc access to hardware clock`
Major update: Many changes from Matthias Pfaller. * conf/DEFAULT: new file, default install kernel * conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5 * conf/KLONDIKE: cosmetic changes * conf/STEELHEAD: cosmetic changes * conf/files.pc532: rd got a file of it's own * dev/lpt.c: changes to support lower interrupt latency, packet input/output is now done at spl0 * dev/ncr.c: changes to support the most recent atari version of the ncr5380 driver * dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version, memcpy -> bcopy. * dev/rd.c: ramdisk driver * dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can be changed with gdb * include/psl.h: struct iv now protected by !LOCORE && _KERNEL inlining of splx can be prevented with new kernel option NO_INLINE_SPLX splx_di is like splx but leaves processor interrupts disabled * pc532/autoconf.c: cosmetic changes * pc532/conf.c: with rd entries * pc532/intr.c: changes to support splx_di * pc532/locore.s: ramdisk is no longer initialized not splx, but rett is now used to reenable CPU interrupts when leaving the interrupt service routine. This is necessary to prevent recursive interrupts. * pc532/sys_machdep.c: memcpy -> bcopy * pc532/mem.c: moved ramdisk to dev/rd.c * stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800 Use current form of libsa and libkern. * stand/inflate.c: emit twiddle every 8k and not every 1k * stand/rd.c: ramdisk starts at 0x288000 1995-09-26 23:15:57 +03:00			`options "CON_BRK_PANIC" # 3 breaks on tty0 -> panic? y/n`
configuration name changes, cleanup on the Makefile 1994-05-03 11:26:59 +04:00
Do what it takes to make vnd a swap device :) 1995-02-12 06:53:45 +03:00			`config "netbsd" root on sd0 swap on sd0 and sd1 and vnd0a`
configuration name changes, cleanup on the Makefile 1994-05-03 11:26:59 +04:00
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00			`membus0 at root`

			`#rd0 at membus?`

merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`#ncr0 at membus?`
			`oldncr0 at membus?`
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00
			`scsibus0 at scsi?`

			`sd* at scsibus? target ? lun ? # SCSI disks`
			`st* at scsibus? target ? lun ? # SCSI tapes`
			`#cd* at scsibus? target ? lun ? # SCSI ???`

Move to config.new, add lpt driver. 1995-01-18 11:13:29 +03:00			`scn0 at membus?`
			`scn1 at membus?`
			`scn2 at membus?`
			`scn3 at membus?`
			`scn4 at membus?`
			`scn5 at membus?`
			`scn6 at membus?`
			`scn7 at membus?`
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00
			`pseudo-device pty 16 # pseudo-terminals`
			`pseudo-device loop 1 # loopback network`
			`pseudo-device bpfilter 4 # packet filter`
Update a bit. 1996-01-25 22:36:36 +03:00			`pseudo-device sl 3 # compressed SLIP`
			`pseudo-device ppp 2 # Point-to-Point Protocol`
vn -> vnd renaming, for consistency 1995-01-25 08:34:51 +03:00			`pseudo-device vnd 4 # Vnode devices`
Move to config.new, genassym static 1994-12-22 06:23:20 +03:00			`#pseudo-device ether #`