NetBSD/etc/rc.subr

# $NetBSD: rc.subr,v 1.105 2020/09/17 20:29:03 otis Exp $
#
# Copyright (c) 1997-2011 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Luke Mewburn.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# rc.subr
#	functions used by various rc scripts
#

: ${rcvar_manpage:='rc.conf(5)'}
: ${RC_PID:=$$} ; export RC_PID
nl='
' # a literal newline

# RC variables to clear on start.
_env_clear_rc_vars="
RC_PID=
_rc_pid=
_rc_original_stdout_fd=
_rc_original_stderr_fd=
_rc_postprocessor_fd=
_rc_kill_ntries=
"

#
#	functions
#	---------

#
# checkyesno var
#	Test $1 variable.
#	Return 0 if it's "yes" (et al), 1 if it's "no" (et al), 2 otherwise.
#
checkyesnox()
{
	eval _value=\$${1}
	case $_value in

		#	"yes", "true", "on", or "1"
	[Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
		return 0
		;;

		#	"no", "false", "off", or "0"
	[Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
		return 1
		;;
	*)
		return 2
		;;
	esac
}

#
# checkyesno var
#	Test $1 variable, and warn if not set to YES or NO.
#	Return 0 if it's "yes" (et al), nonzero otherwise.
#
checkyesno()
{
	local var

	checkyesnox $1
	var=$?
	case "${var}" in
	( 0 | 1 )	return $var;;
	esac
	warn "\$${1} is not set properly - see ${rcvar_manpage}."
	return 1
}

#
# yesno_to_truefalse var
#	Convert the value of a variable from any of the values
#	understood by checkyesno() to "true" or "false".
#
yesno_to_truefalse()
{
	local var=$1
	if checkyesno $var; then
		eval $var=true
		return 0
	else
		eval $var=false
		return 1
	fi
}

#
# reverse_list list
#	print the list in reverse order
#
reverse_list()
{
	_revlist=
	for _revfile; do
		_revlist="$_revfile $_revlist"
	done
	echo $_revlist
}

#
# If booting directly to multiuser, send SIGTERM to
# the parent (/etc/rc) to abort the boot.
# Otherwise just exit.
#
stop_boot()
{
	if [ "$autoboot" = yes ]; then
		echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!"
		kill -TERM ${RC_PID}
	fi
	exit 1
}

#
# mount_critical_filesystems type
#	Go through the list of critical file systems as provided in
#	the rc.conf(5) variable $critical_filesystems_${type}, checking
#	each one to see if it is mounted, and if it is not, mounting it.
#	It's not an error if file systems prefixed with "OPTIONAL:"
#	are not mentioned in /etc/fstab.
#
mount_critical_filesystems()
{
	eval _fslist=\$critical_filesystems_${1}
	_mountcrit_es=0
	for _fs in $_fslist; do
		_optional=false
		case "$_fs" in
		OPTIONAL:*)
			_optional=true
			_fs="${_fs#*:}"
			;;
		esac
		_ismounted=false
		# look for a line like "${fs} on * type *"
		# or "* on ${fs} type *" in the output from mount.
		case "${nl}$( mount )${nl}" in
		*" on ${_fs} type "*)
			_ismounted=true
			;;
		*"${nl}${_fs} on "*)
			_ismounted=true
			;;
		esac
		if $_ismounted; then
			print_rc_metadata \
			"note:File system ${_fs} was already mounted"
		else
			_mount_output=$( mount $_fs 2>&1 )
			_mount_es=$?
			case "$_mount_output" in
			*"${nl}"*)
				# multiple lines can't be good,
				# not even if $_optional is true
				;;
			*[uU]'nknown special file or file system'*)
				if $_optional; then
					# ignore this error
					print_rc_metadata \
			"note:Optional file system ${_fs} is not present"
					_mount_es=0
					_mount_output=""
				fi
				;;
			esac
			if [ -n "$_mount_output" ]; then
				printf >&2 "%s\n" "$_mount_output"
			fi
			if [ "$_mount_es" != 0 ]; then
				_mountcrit_es="$_mount_es"
			fi
		fi
	done
	return $_mountcrit_es
}

#
# check_pidfile pidfile procname [interpreter]
#	Parses the first line of pidfile for a PID, and ensures
#	that the process is running and matches procname.
#	Prints the matching PID upon success, nothing otherwise.
#	interpreter is optional; see _find_processes() for details.
#
check_pidfile()
{
	_pidfile=$1
	_procname=$2
	_interpreter=$3
	if [ -z "$_pidfile" ] || [ -z "$_procname" ]; then
		err 3 'USAGE: check_pidfile pidfile procname [interpreter]'
	fi
	if [ ! -f $_pidfile ]; then
		return
	fi
	read _pid _junk < $_pidfile
	if [ -z "$_pid" ]; then
		return
	fi
	_find_processes $_procname ${_interpreter:-.} '-p '"$_pid"
}

#
# check_process procname [interpreter]
#	Ensures that a process (or processes) named procname is running.
#	Prints a list of matching PIDs.
#	interpreter is optional; see _find_processes() for details.
#
check_process()
{
	_procname=$1
	_interpreter=$2
	if [ -z "$_procname" ]; then
		err 3 'USAGE: check_process procname [interpreter]'
	fi
	_find_processes $_procname ${_interpreter:-.} '-A'
}

#
# _find_processes procname interpreter psargs
#	Search for procname in the output of ps generated by psargs.
#	Prints the PIDs of any matching processes, space separated.
#
#	If interpreter == ".", check the following variations of procname
#	against the first word of each command:
#		procname
#		`basename procname`
#		`basename procname` + ":"
#		"(" + `basename procname` + ")"
#
#	If interpreter != ".", read the first line of procname, remove the
#	leading #!, normalise whitespace, append procname, and attempt to
#	match that against each command, either as is, or with extra words
#	at the end.  As an alternative, to deal with interpreted daemons
#	using perl, the basename of the interpreter plus a colon is also
#	tried as the prefix to procname.
#
_find_processes()
{
	if [ $# -ne 3 ]; then
		err 3 'USAGE: _find_processes procname interpreter psargs'
	fi
	_procname=$1
	_interpreter=$2
	_psargs=$3

	_pref=
	_procnamebn=${_procname##*/}
	if [ $_interpreter != "." ]; then	# an interpreted script
		read _interp < ${_chroot:-}/$_procname	# read interpreter name
		_interp=${_interp#\#!}		# strip #!
		set -- $_interp
		if [ $1 = "/usr/bin/env" ]; then
			shift
			set -- $(type $1)
			shift $(($# - 1))
			_interp="${1##*/} $_procname"
		else
			_interp="$* $_procname"
		fi
		if [ $_interpreter != $1 ]; then
			warn "\$command_interpreter $_interpreter != $1"
		fi
		_interpbn=${1##*/}
		_fp_args='_argv'
		_fp_match='case "$_argv" in
		    ${_interp}|"${_interp} "*|"${_interpbn}: "*${_procnamebn}*)'
	else					# a normal daemon
		_fp_args='_arg0 _argv'
		_fp_match='case "$_arg0" in
		    $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")'
	fi

	_proccheck='
		ps -o "pid,args" '"$_psargs"' 2>&1 |
		while read _npid '"$_fp_args"'; do
			case "$_npid" in
			ps:|PID)
				continue ;;
			esac ; '"$_fp_match"'
				echo -n "$_pref$_npid" ;
				_pref=" "
				;;
			esac
		done'

#echo 1>&2 "proccheck is :$_proccheck:"
	eval $_proccheck
}

#
# kill_pids signal pid [pid ...]
#	kills the given pids with signal. 
#	returns the list of pids killed successfully.
#
kill_pids()
{
	local signal=$1
	shift
	local list="$*"
	local j=
	local nlist=
	for j in $list; do
		if kill -$signal $j 2>/dev/null; then
			nlist="${nlist}${nlist:+ }$j"
		fi
	done
	echo $nlist
}

#
# wait_for_pids pid [pid ...]
#	spins until none of the pids exist
#	if _rc_kill_ntries is set and exceeded, it SIGKILLS the remaining
#	pids
#
wait_for_pids()
{
	local ntries=0
	local prefix=
	local nlist=
	local list="$*"

	if [ -z "$list" ]; then
		return
	fi

	while true; do
		nlist=$(kill_pids 0 $list)
		if [ -z "$nlist" ]; then
			break
		fi
		if [ "$list" != "$nlist" ]; then
			list=$nlist
			echo -n ${prefix:-"Waiting for PIDS: "}$list
			prefix=", "
		fi
		# We want this to be a tight loop for a fast exit
		sleep 0.05
		ntries=$((ntries + 1))
		if [ -n "${_rc_kill_ntries}" ]; then
			if [ ${ntries} -gt ${_rc_kill_ntries} ]; then
				kill_pids 9 $list > /dev/null
			fi
		fi
	done
	if [ -n "$prefix" ]; then
		echo "."
	fi
}

#
# run_rc_command argument [parameters]
#	Search for argument in the list of supported commands, which is:
#		"start stop restart rcvar status poll ${extra_commands}"
#	If there's a match, run ${argument}_cmd or the default method
#	(see below), and pass the optional list of parameters to it.
#
#	If argument has a given prefix, then change the operation as follows:
#		Prefix	Operation
#		------	---------
#		fast	Skip the pid check, and set rc_fast=yes
#		force	Set ${rcvar} to YES, and set rc_force=yes
#		one	Set ${rcvar} to YES
#
#	The following globals are used:
#
#	Name		Needed	Purpose
#	----		------	-------
#	name		y	Name of script.
#
#	command		n	Full path to command.
#				Not needed if ${rc_arg}_cmd is set for
#				each keyword.
#
#	command_args	n	Optional args/shell directives for command.
#
#	command_interpreter n	If not empty, command is interpreted, so
#				call check_{pidfile,process}() appropriately.
#
#	extra_commands	n	List of extra commands supported.
#
#	pidfile		n	If set, use check_pidfile $pidfile $command,
#				otherwise use check_process $command.
#				In either case, only check if $command is set.
#
#	procname	n	Process name to check for instead of $command.
#
#	rcvar		n	This is checked with checkyesno to determine
#				if the action should be run.
#
#	${name}_chroot	n	Directory to chroot to before running ${command}
#				Requires /usr to be mounted.
#
#	${name}_chdir	n	Directory to cd to before running ${command}
#				(if not using ${name}_chroot).
#
#	${name}_flags	n	Arguments to call ${command} with.
#				NOTE:	$flags from the parent environment
#					can be used to override this.
#
#	${name}_env	n	Additional environment variable settings
#				for running ${command}
#
#	${name}_nice	n	Nice level to run ${command} at.
#
#	${name}_user	n	User to run ${command} as, using su(1) if not
#				using ${name}_chroot.
#				Requires /usr to be mounted.
#
#	${name}_group	n	Group to run chrooted ${command} as.
#				Requires /usr to be mounted.
#
#	${name}_groups	n	Comma separated list of supplementary groups
#				to run the chrooted ${command} with.
#				Requires /usr to be mounted.
#
#	${rc_arg}_cmd	n	If set, use this as the method when invoked;
#				Otherwise, use default command (see below)
#
#	${rc_arg}_precmd n	If set, run just before performing the
#				${rc_arg}_cmd method in the default
#				operation (i.e, after checking for required
#				bits and process (non)existence).
#				If this completes with a non-zero exit code,
#				don't run ${rc_arg}_cmd.
#
#	${rc_arg}_postcmd n	If set, run just after performing the
#				${rc_arg}_cmd method, if that method
#				returned a zero exit code.
#
#	required_dirs	n	If set, check for the existence of the given
#				directories before running the default
#				(re)start command.
#
#	required_files	n	If set, check for the readability of the given
#				files before running the default (re)start
#				command.
#
#	required_vars	n	If set, perform checkyesno on each of the
#				listed variables before running the default
#				(re)start command.
#
#	Default behaviour for a given argument, if no override method is
#	provided:
#
#	Argument	Default behaviour
#	--------	-----------------
#	start		if !running && checkyesno ${rcvar}
#				${command}
#
#	stop		if ${pidfile}
#				rc_pid=$(check_pidfile $pidfile $command)
#			else
#				rc_pid=$(check_process $command)
#			kill $sig_stop $rc_pid
#			wait_for_pids $rc_pid
#			($sig_stop defaults to TERM.)
#
#	reload		Similar to stop, except use $sig_reload instead,
#			and doesn't wait_for_pids.
#			$sig_reload defaults to HUP.
#
#	restart		Run `stop' then `start'.
#
#	status		Show if ${command} is running, etc.
#
#	poll		Wait for ${command} to exit.
#
#	rcvar		Display what rc.conf variable is used (if any).
#
#	Variables available to methods, and after run_rc_command() has
#	completed:
#
#	Variable	Purpose
#	--------	-------
#	rc_arg		Argument to command, after fast/force/one processing
#			performed
#
#	rc_flags	Flags to start the default command with.
#			Defaults to ${name}_flags, unless overridden
#			by $flags from the environment.
#			This variable may be changed by the precmd method.
#
#	rc_pid		PID of command (if appropriate)
#
#	rc_fast		Not empty if "fast" was provided (q.v.)
#
#	rc_force	Not empty if "force" was provided (q.v.)
#
#
run_rc_command()
{
	rc_arg=$1
	if [ -z "$name" ]; then
		err 3 'run_rc_command: $name is not set.'
	fi

	_rc_prefix=
	case "$rc_arg" in
	fast*)				# "fast" prefix; don't check pid
		rc_arg=${rc_arg#fast}
		rc_fast=yes
		;;
	force*)				# "force" prefix; always run
		rc_force=yes
		_rc_prefix=force
		rc_arg=${rc_arg#${_rc_prefix}}
		if [ -n "${rcvar}" ]; then
			eval ${rcvar}=YES
		fi
		;;
	one*)				# "one" prefix; set ${rcvar}=yes
		_rc_prefix=one
		rc_arg=${rc_arg#${_rc_prefix}}
		if [ -n "${rcvar}" ]; then
			eval ${rcvar}=YES
		fi
		;;
	esac

	_keywords="start stop restart rcvar"
	if [ -n "$extra_commands" ]; then
		_keywords="${_keywords} ${extra_commands}"
	fi
	rc_pid=
	_pidcmd=
	_procname=${procname:-${command}}

					# setup pid check command if not fast
	if [ -z "$rc_fast" ] && [ -n "$_procname" ]; then
		if [ -n "$pidfile" ]; then
			_pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')'
		else
			_pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')'
		fi
		if [ -n "$_pidcmd" ]; then
			_keywords="${_keywords} status poll"
		fi
	fi

	if [ -z "$rc_arg" ]; then
		rc_usage "$_keywords"
	fi
	shift	# remove $rc_arg from the positional parameters

	if [ -n "$flags" ]; then	# allow override from environment
		rc_flags=$flags
	else
		eval rc_flags=\$${name}_flags
	fi
	eval _chdir=\$${name}_chdir	_chroot=\$${name}_chroot \
	    _nice=\$${name}_nice	_user=\$${name}_user \
	    _group=\$${name}_group	_groups=\$${name}_groups \
	    _env=\"\$${name}_env\"

	if [ -n "$_user" ]; then	# unset $_user if running as that user
		if [ "$_user" = "$(id -un)" ]; then
			unset _user
		fi
	fi

					# if ${rcvar} is set, and $1 is not
					# "rcvar", then run
					#	checkyesno ${rcvar}
					# and return if that failed or warn
					# user and exit when interactive
					#
	if [ -n "${rcvar}" ] && [ "$rc_arg" != "rcvar" ]; then
		if ! checkyesno ${rcvar}; then
					# check whether interactive or not
			if [ -n "$_run_rc_script" ]; then
				return 0
			fi
			for _elem in $_keywords; do
				if [ "$_elem" = "$rc_arg" ]; then
					cat 1>&2 <<EOF
\$${rcvar} is not enabled - see ${rcvar_manpage}.
Use the following if you wish to perform the operation:
  $0 one${rc_arg}
EOF
					exit 1
				fi
			done
			echo 1>&2 "$0: unknown directive '$rc_arg'."
			rc_usage "$_keywords"
		fi
	fi

	eval $_pidcmd			# determine the pid if necessary

	for _elem in $_keywords; do
		if [ "$_elem" != "$rc_arg" ]; then
			continue
		fi

					# if there's a custom ${XXX_cmd},
					# run that instead of the default
					#
		eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \
		    _postcmd=\$${rc_arg}_postcmd
		if [ -n "$_cmd" ]; then
					# if the precmd failed and force
					# isn't set, exit
					#
			if ! eval $_precmd && [ -z "$rc_force" ]; then
				return 1
			fi

			if ! eval $_cmd \"\${@}\" && [ -z "$rc_force" ]; then
				return 1
			fi
			eval $_postcmd
			return 0
		fi

		if [ ${#} -gt 0 ]; then
			err 1 "the $rc_arg command does not take any parameters"
		fi

		case "$rc_arg" in	# default operations...

		status)
			if [ -n "$rc_pid" ]; then
				echo "${name} is running as pid $rc_pid."
			else
				echo "${name} is not running."
				return 1
			fi
			;;

		start)
			if [ -n "$rc_pid" ]; then
				echo 1>&2 "${name} already running? (pid=$rc_pid)."
				exit 1
			fi

			if [ ! -x ${_chroot}${command} ]; then
				return 0
			fi

					# check for required variables,
					# directories, and files
					#
			for _f in $required_vars; do
				if ! checkyesno $_f; then
					warn "\$${_f} is not enabled."
					if [ -z "$rc_force" ]; then
						return 1
					fi
				fi
			done
			for _f in $required_dirs; do
				if [ ! -d "${_f}/." ]; then
					warn "${_f} is not a directory."
					if [ -z "$rc_force" ]; then
						return 1
					fi
				fi
			done
			for _f in $required_files; do
				if [ ! -r "${_f}" ]; then
					warn "${_f} is not readable."
					if [ -z "$rc_force" ]; then
						return 1
					fi
				fi
			done

					# if the precmd failed and force
					# isn't set, exit
					#
			if ! eval $_precmd && [ -z "$rc_force" ]; then
				return 1
			fi

					# setup the command to run, and run it
					#
			echo "Starting ${name}."
			if [ -n "$_chroot" ]; then
				_doit="\
$_env_clear_rc_vars $_env \
${_nice:+nice -n $_nice }\
chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\
$_chroot $command $rc_flags $command_args"
			else
				_doit="\
${_chdir:+cd $_chdir; }\
$_env_clear_rc_vars $_env \
${_nice:+nice -n $_nice }\
$command $rc_flags $command_args"
				if [ -n "$_user" ]; then
				    _doit="su -m $_user -c 'sh -c \"$_doit\"'"
				fi
			fi

					# if the cmd failed and force
					# isn't set, exit
					#
			if ! eval $_doit && [ -z "$rc_force" ]; then
				return 1
			fi

					# finally, run postcmd
					#
			eval $_postcmd
			;;

		stop)
			if [ -z "$rc_pid" ]; then
				if [ -n "$pidfile" ]; then
					echo 1>&2 \
				    "${name} not running? (check $pidfile)."
				else
					echo 1>&2 "${name} not running?"
				fi
				exit 1
			fi

					# if the precmd failed and force
					# isn't set, exit
					#
			if ! eval $_precmd && [ -z "$rc_force" ]; then
				return 1
			fi

					# send the signal to stop
					#
			echo "Stopping ${name}."
			_doit="kill -${sig_stop:-TERM} $rc_pid"
			if [ -n "$_user" ]; then
				_doit="su -m $_user -c 'sh -c \"$_doit\"'"
			fi

					# if the stop cmd failed and force
					# isn't set, exit
					#
			if ! eval $_doit && [ -z "$rc_force" ]; then
				return 1
			fi

					# wait for the command to exit,
					# and run postcmd.
			wait_for_pids $rc_pid
			eval $_postcmd
			;;

		reload)
			if [ -z "$rc_pid" ]; then
				if [ -n "$pidfile" ]; then
					echo 1>&2 \
				    "${name} not running? (check $pidfile)."
				else
					echo 1>&2 "${name} not running?"
				fi
				exit 1
			fi
			echo "Reloading ${name} config files."
			if ! eval $_precmd && [ -z "$rc_force" ]; then
				return 1
			fi
			_doit="kill -${sig_reload:-HUP} $rc_pid"
			if [ -n "$_user" ]; then
				_doit="su -m $_user -c 'sh -c \"$_doit\"'"
			fi
			if ! eval $_doit && [ -z "$rc_force" ]; then
				return 1
			fi
			eval $_postcmd
			;;

		restart)
			if ! eval $_precmd && [ -z "$rc_force" ]; then
				return 1
			fi
					# prevent restart being called more
					# than once by any given script
					#
			if ${_rc_restart_done:-false}; then
				return 0
			fi
			_rc_restart_done=true

			( $0 ${_rc_prefix}stop )
			$0 ${_rc_prefix}start

			eval $_postcmd
			;;

		poll)
			if [ -n "$rc_pid" ]; then
				wait_for_pids $rc_pid
			fi
			;;

		rcvar)
			echo "# $name"
			if [ -n "$rcvar" ]; then
				if checkyesno ${rcvar}; then
					echo "\$${rcvar}=YES"
				else
					echo "\$${rcvar}=NO"
				fi
			fi
			;;

		*)
			rc_usage "$_keywords"
			;;

		esac
		return 0
	done

	echo 1>&2 "$0: unknown directive '$rc_arg'."
	rc_usage "$_keywords"
	exit 1
}

#
# _have_rc_postprocessor
#	Test whether the current script is running in a context that
#	was invoked from /etc/rc with a postprocessor.
#
#	If the test fails, some variables may be unset to make
#	such tests more efficient in future.
#
_have_rc_postprocessor()
{
	# Cheap tests that fd and pid are set, fd is writable.
	[ -n "${_rc_pid}" ] || { unset _rc_pid; return 1; }
	[ -n "${_rc_postprocessor_fd}" ] || { unset _rc_pid; return 1; }
	eval ": >&${_rc_postprocessor_fd}" 2>/dev/null \
	|| { unset _rc_pid; return 1; }

	return 0
}

#
# run_rc_script file arg
#	Start the script `file' with `arg', and correctly handle the
#	return value from the script.  If `file' ends with `.sh', it's
#	sourced into the current environment.  If `file' appears to be
#	a backup or scratch file, ignore it.  Otherwise if it's
#	executable run as a child process.
#
#	If `file' contains "KEYWORD: interactive" and if we are
#	running inside /etc/rc with postprocessing, then the script's
#	stdout and stderr are redirected to $_rc_original_stdout_fd and
#	$_rc_original_stderr_fd, so the output will be displayed on the
#	console but not intercepted by /etc/rc's postprocessor.
#
run_rc_script()
{
	_file=$1
	_arg=$2
	if [ -z "$_file" ] || [ -z "$_arg" ]; then
		err 3 'USAGE: run_rc_script file arg'
	fi

	_run_rc_script=true

	unset	name command command_args command_interpreter \
		extra_commands pidfile procname \
		rcvar required_dirs required_files required_vars
	eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd

	_must_redirect=false
	if _have_rc_postprocessor \
	    && _has_rcorder_keyword interactive $_file
	then
		_must_redirect=true
	fi

	case "$_file" in
	*.sh)				# run in current shell
		if $_must_redirect; then
			print_rc_metadata \
			    "note:Output from ${_file} is not logged"
			no_rc_postprocess eval \
			    'set $_arg ; . $_file'
		else
			set $_arg ; . $_file
		fi
		;;
	*[~#]|*.OLD|*.orig|*,v)		# scratch file; skip
		warn "Ignoring scratch file $_file"
		;;
	*)				# run in subshell
		if [ -x $_file ] && $_must_redirect; then
			print_rc_metadata \
			    "note:Output from ${_file} is not logged"
			if [ -n "$rc_fast_and_loose" ]; then
				no_rc_postprocess eval \
				    'set $_arg ; . $_file'
			else
				no_rc_postprocess eval \
				    '( set $_arg ; . $_file )'
			fi
		elif [ -x $_file ]; then
			if [ -n "$rc_fast_and_loose" ]; then
				set $_arg ; . $_file
			else
				( set $_arg ; . $_file )
			fi
		else
			warn "Ignoring non-executable file $_file"
		fi
		;;
	esac
}

#
# load_rc_config command
#	Source in the configuration file for a given command.
#
load_rc_config()
{
	_command=$1
	if [ -z "$_command" ]; then
		err 3 'USAGE: load_rc_config command'
	fi

	if ${_rc_conf_loaded:-false}; then
		:
	else
		. /etc/rc.conf
		_rc_conf_loaded=true
	fi
	if [ -f /etc/rc.conf.d/"$_command" ]; then
		. /etc/rc.conf.d/"$_command"
	fi
}

#
# load_rc_config_var cmd var
#	Read the rc.conf(5) var for cmd and set in the
#	current shell, using load_rc_config in a subshell to prevent
#	unwanted side effects from other variable assignments.
#
load_rc_config_var()
{
	if [ $# -ne 2 ]; then
		err 3 'USAGE: load_rc_config_var cmd var'
	fi
	eval $(eval '(
		load_rc_config '$1' >/dev/null;
		if [ -n "${'$2'}" ] || [ "${'$2'-UNSET}" != "UNSET" ]; then
			echo '$2'=\'\''${'$2'}\'\'';
		fi
	)' )
}

#
# rc_usage commands
#	Print a usage string for $0, with `commands' being a list of
#	valid commands.
#
rc_usage()
{
	echo -n 1>&2 "Usage: $0 [fast|force|one]("

	_sep=
	for _elem; do
		echo -n 1>&2 "$_sep$_elem"
		_sep="|"
	done
	echo 1>&2 ")"
	exit 1
}

#
# err exitval message
#	Display message to stderr and log to the syslog, and exit with exitval.
#
err()
{
	exitval=$1
	shift

	if [ -x /usr/bin/logger ]; then
		logger "$0: ERROR: $*"
	fi
	echo 1>&2 "$0: ERROR: $*"
	exit $exitval
}

#
# warn message
#	Display message to stderr and log to the syslog.
#
warn()
{
	if [ -x /usr/bin/logger ]; then
		logger "$0: WARNING: $*"
	fi
	echo 1>&2 "$0: WARNING: $*"
}

#
# backup_file action file cur backup
#	Make a backup copy of `file' into `cur', and save the previous
#	version of `cur' as `backup' or use rcs for archiving.
#
#	This routine checks the value of the backup_uses_rcs variable,
#	which can be either YES or NO.
#
#	The `action' keyword can be one of the following:
#
#	add		`file' is now being backed up (and is possibly
#			being reentered into the backups system).  `cur'
#			is created and RCS files, if necessary, are
#			created as well.
#
#	update		`file' has changed and needs to be backed up.
#			If `cur' exists, it is copied to to `back' or
#			checked into RCS (if the repository file is old),
#			and then `file' is copied to `cur'.  Another RCS
#			check in done here if RCS is being used.
#
#	remove		`file' is no longer being tracked by the backups
#			system.  If RCS is not being used, `cur' is moved
#			to `back', otherwise an empty file is checked in,
#			and then `cur' is removed.
#
#
backup_file()
{
	_action=$1
	_file=$2
	_cur=$3
	_back=$4

	if checkyesno backup_uses_rcs; then
		_msg0="backup archive"
		_msg1="update"

		# ensure that history file is not locked
		if [ -f $_cur,v ]; then
			rcs -q -u -U -M $_cur
		fi

		# ensure after switching to rcs that the
		# current backup is not lost
		if [ -f $_cur ]; then
			# no archive, or current newer than archive
			if [ ! -f $_cur,v ] || [ $_cur -nt $_cur,v ]; then
				ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
				rcs -q -kb -U $_cur
				co -q -f -u $_cur
			fi
		fi

		case $_action in
		add|update)
			cp -p $_file $_cur
			ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
			rcs -q -kb -U $_cur
			co -q -f -u $_cur
			chown root:wheel $_cur $_cur,v
			;;
		remove)
			cp /dev/null $_cur
			ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
			rcs -q -kb -U $_cur
			chown root:wheel $_cur $_cur,v
			rm $_cur
			;;
		esac
	else
		case $_action in
		add|update)
			if [ -f $_cur ]; then
				cp -p $_cur $_back
			fi
			cp -p $_file $_cur
			chown root:wheel $_cur
			;;
		remove)
			mv -f $_cur $_back
			;;
		esac
	fi
}

#
# handle_fsck_error fsck_exit_code
#	Take action depending on the return code from fsck.
#
handle_fsck_error()
{
	case $1 in
	0)	# OK
		return
		;;
	2)	# Needs re-run, still fs errors
		echo "File system still has errors; re-run fsck manually!"
		;;
	4)	# Root modified
		echo "Root file system was modified, rebooting ..."
		reboot -n
		echo "Reboot failed; help!"
		;;
	8)	# Check failed
		echo "Automatic file system check failed; help!"
		;;
	12)	# Got signal
		echo "Boot interrupted."
		;;
	*)
		echo "Unknown error $1; help!"
		;;
	esac
	stop_boot
}

#
# _has_rcorder_keyword word file
#	Check whether a file contains a "# KEYWORD:" comment with a
#	specified keyword in the style used by rcorder(8).
#
_has_rcorder_keyword()
{
	local word="$1"
	local file="$2"
	local line

	[ -r "$file" ] || return 1
	while read line; do
		case "${line} " in
		"# KEYWORD:"*[\ \	]"${word}"[\ \	]*)
			return 0
			;;
		"#"*)
			continue
			;;
		*[A-Za-z0-9]*)
			# give up at the first non-empty non-comment line
			return 1
			;;
		esac
	done <"$file"
	return 1
}

#
# print_rc_metadata string
#	Print the specified string in such a way that the post-processor
#	inside /etc/rc will treat it as meta-data.
#
#	If we are not running inside /etc/rc, do nothing.
#
#	For public use by any rc.d script, the string must begin with
#	"note:", followed by arbitrary text.  The intent is that the text
#	will appear in a log file but not on the console.
#
#	For private use within /etc/rc, the string must contain a
#	keyword recognised by the rc_postprocess_metadata() function
#	defined in /etc/rc, followed by a colon, followed by one or more
#	colon-separated arguments associated with the keyword.
#
print_rc_metadata()
{
	# _rc_postprocessor fd, if defined, is the fd to which we must
	# print, prefixing the output with $_rc_metadata_prefix.
	#
	if _have_rc_postprocessor; then
		command printf "%s%s\n" "$rc_metadata_prefix" "$1" \
			>&${_rc_postprocessor_fd}
	fi
}

#
# _flush_rc_output
#	Arrange for output to be flushed, if we are running
#	inside /etc/rc with postprocessing.
#
_flush_rc_output()
{
	print_rc_metadata "nop"
}

#
# print_rc_normal [-n] string
#	Print the specified string in such way that it is treated as
#	normal output, regardless of whether or not we are running
#	inside /etc/rc with post-processing.
#
#	If "-n" is specified in $1, then the string in $2 is printed
#	without a newline; otherwise, the string in $1 is printed
#	with a newline.
#
#	Intended use cases include:
#
#	o   An rc.d script can use ``print_rc_normal -n'' to print a
#	    partial line in such a way that it appears immediately
#	    instead of being buffered by rc(8)'s post-processor.
#
#	o   An rc.d script that is run via the no_rc_postprocess
#	    function (so most of its output is invisible to rc(8)'s
#	    post-processor) can use print_rc_normal to force some of its
#	    output to be seen by the post-processor.
#
#
print_rc_normal()
{
	# print to stdout or _rc_postprocessor_fd, depending on
	# whether not we have an rc postprocessor.
	#
	local fd=1
	_have_rc_postprocessor && fd="${_rc_postprocessor_fd}"
	case "$1" in
	"-n")
		command printf "%s" "$2" >&${fd}
		_flush_rc_output
		;;
	*)
		command printf "%s\n" "$1" >&${fd}
		;;
	esac
}

#
# no_rc_postprocess cmd...
#	Execute the specified command in such a way that its output
#	bypasses the post-processor that handles the output from
#	most commands that are run inside /etc/rc.  If we are not
#	inside /etc/rc, then just execute the command without special
#	treatment.
#
#	The intent is that interactive commands can be run via
#	no_rc_postprocess(), and their output will apear immediately
#	on the console instead of being hidden or delayed by the
#	post-processor.	 An unfortunate consequence of the output
#	bypassing the post-processor is that the output will not be
#	logged.
#
no_rc_postprocess()
{
	if _have_rc_postprocessor; then
		"$@" >&${_rc_original_stdout_fd} 2>&${_rc_original_stderr_fd}
	else
		"$@"
	fi
}

#
# twiddle
#	On each call, print a different one of "/", "-", "\\", "|",
#	followed by a backspace.  The most recently printed value is
#	saved in $_twiddle_state.
#
#	Output is to /dev/tty, so this function may be useful even inside
#	a script whose output is redirected.
#
twiddle()
{
	case "$_twiddle_state" in
	'/')	_next='-' ;;
	'-')	_next='\' ;;
	'\')	_next='|' ;;
	*)	_next='/' ;;
	esac
	command printf "%s\b" "$_next" >/dev/tty
	_twiddle_state="$_next"
}

#
# human_exit_code
#	Print the a human version of the exit code.
#
human_exit_code()
{
	if [ "$1" -lt 127 ]
	then
		echo "exited with code $1"
	elif [ "$(expr $1 % 256)" -eq 127 ]
	then
		# This cannot really happen because the shell will not
		# pass stopped job status out and the exit code is limited
		# to 8 bits. This code is here just for completeness.
		echo "stopped with signal $(expr $1 / 256)"
	else
		echo "terminated with signal $(expr $1 - 128)"
	fi
}

#
# collapse_backslash_newline
#	Copy input to output, collapsing <backslash><newline>
#	to nothing, but leaving other backslashes alone.
#
collapse_backslash_newline()
{
	local line
	while read -r line ; do
		case "$line" in
		*\\)
			# print it, without the backslash or newline
			command printf "%s" "${line%?}"
			;;
		*)
			# print it, with a newline
			command printf "%s\n" "${line}"
			;;
		esac
	done
}

# Shell implementations of basename and dirname, usable before
# the /usr file system is mounted.
#
basename()
{
	local file="$1"
	local suffix="$2"
	local base

	base="${file##*/}"		# remove up to and including last '/'
	base="${base%${suffix}}"	# remove suffix, if any
	command printf "%s\n" "${base}"
}

dirname()
{
	local file="$1"
	local dir

	case "$file" in
	/*/*)	dir="${file%/*}" ;;	# common case: absolute path
	/*)	dir="/" ;;		# special case: name in root dir
	*/*)	dir="${file%/*}" ;;	# common case: relative path with '/'
	*)	dir="." ;;		# special case: name without '/'
	esac
	command printf "%s\n" "${dir}"
}

# Override the normal "echo" and "printf" commands, so that
# partial lines printed by rc.d scripts appear immediately,
# instead of being buffered by rc(8)'s post-processor.
#
# Naive use of the echo or printf commands from rc.d scripts,
# elsewhere in rc.subr, or anything else that sources rc.subr,
# will call these functions.  To call the real echo and printf
# commands, use "command echo" or "command printf".
#
# Avoid use of echo altogether as much as possible, printf works better
#
echo()
{
	local IFS=' ' NL='\n'	# not a literal newline...

	case "$1" in
	-n)	NL=; shift;;
	esac

	command printf "%s${NL}" "$*"

	if test -z "${NL}"
	then
		_flush_rc_output
	fi
	return 0
}

printf()
{
	command printf "$@"
	case "$1" in
	*'\n')	: ;;
	*)	_flush_rc_output ;;
	esac
	return 0
}

kat() {
	local i
	local v
	for i; do
		while read -r v; do
			v="${v%%#*}"
			if [ -z "$v" ]; then
				continue
			fi
			echo "$v"
		done < "$i"
	done
}

_rc_subr_loaded=: