Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/arch/i386/conf/GENERIC

880 lines
29 KiB
Plaintext
Raw Normal View History

Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
# $NetBSD: GENERIC,v 1.382 2000/12/11 23:16:51 onoe Exp $
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
#
# GENERIC -- everything that's currently supported
#
Move non-optional options to std.i386, and use that file.
1996-11-15 12:19:31 +03:00
include "arch/i386/conf/std.i386"
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
#ident "GENERIC-$Revision: 1.382 $"
Add commented out "ident"-command
2000-01-24 02:46:04 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
options I386_CPU
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options I486_CPU
options I586_CPU
Remove TAB after `options I686_CPU'.
1998-06-07 06:34:41 +04:00
options I686_CPU
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# CPU-related options.
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options MATH_EMULATE # floating point emulation
Enable VM86 -- it's needed for some X servers (notably, S3 Savage, which runs the VESA BIOS in VM86 emulation in order to switch video modes).
2000-09-20 22:22:22 +04:00
options VM86 # virtual 8086 emulation
Clump USER_LDT with other CPU-related options.
1997-10-08 14:09:36 +04:00
options USER_LDT # user-settable LDT; used by WINE
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# eliminate delay no-ops in I/O; recommended on all but very old machines
#options DUMMY_NOPS
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
s/milieconds/milliseconds/
1998-10-30 16:47:02 +03:00
# delay between "rebooting ..." message and hardware reset, in milliseconds
Add a CPURESET_DELAY options which specifies the delay (in milliseconds) between the "rebooting" message and the hardware reset. If set to 0, the call to delay() is disabled. Default is 2s.
1998-10-13 15:43:50 +04:00
#options CPURESET_DELAY=2000
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# This option allows you to force a serial console at the specified
-point to console(4) manpage for serial console parameters (suggested by Chuck Cranor) -insert a reasonable IO base address for "iy at isa" (from Ignatios Souvatzis)
1997-11-11 23:31:38 +03:00
# I/O address. see console(4) for details.
Make serial line debugging easier to enable and use
1998-08-13 21:41:10 +04:00
#options "CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
Note which units memory sizes are counted in. Fixes half of PR port-i386/6159 ("Heiko W.Rupp" <hwr@pilhuhn.de>).
1998-09-18 16:22:54 +04:00
# serial console option of the new boot strap code.
s/options\t/options \t/ for CONS_OVERRIDE line, so that addition/removal of "#" does not affect indentation.
2000-02-26 20:12:37 +03:00
#options CONS_OVERRIDE # Always use above! independent of boot info
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Update comments regarding BIOSEXTMEM (now REALEXTMEM), and add REALBASEMEM.
1997-10-08 13:32:36 +04:00
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
typo: that -> than
1997-10-19 04:00:18 +04:00
# values. Note that the BIOS may *correctly* report less than 640k of base
Update comments regarding BIOSEXTMEM (now REALEXTMEM), and add REALBASEMEM.
1997-10-08 13:32:36 +04:00
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
Slight edit to previous.
1998-09-22 05:16:48 +04:00
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
Add a blurb about the EXTMEM_SIZE option to the example kernels, disabled by default.
1996-03-05 04:32:11 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# Standard system options
options UCONSOLE # users can use TIOCCONS (for xconsole)
options INSECURE # disable kernel security levels
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
Have NTP PLL on by default.
1999-01-29 03:00:17 +03:00
options NTP # NTP phase/frequency locked loop
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
add KMEMSTATS and sync GENERIC, INSTALL, and DISKLESS
1997-08-28 12:00:12 +04:00
options KTRACE # system call tracing via ktrace(1)
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
#options SHMMAXPGS=1024 # 1024 pages is the default
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
options LKM # loadable kernel modules
# Diagnostic/debugging support options
options DIAGNOSTIC # cheap kernel consistency checks
#options DEBUG # expensive debugging checks/support
KMEMSTATS is documented in options(4) as being a possible severe performance hit, and on an 80386 processor, it most certainly is. Pull it from the GENERIC (and DISKLESS "generic") kernels--configure it in yourself if you actually need it.
1997-12-09 16:32:32 +03:00
#options KMEMSTATS # kernel memory statistics (vmstat -m)
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
options DDB # in-kernel debugger
Turn on DDB history by default.
2000-07-09 04:41:24 +04:00
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
#options KGDB # remote debugger
#options "KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
fix some typos and other misfeatures in comments; no functional change note that bha driver supports BT44x cards as well
1997-10-23 09:49:42 +04:00
# Compatibility options
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
options COMPAT_09 # NetBSD 0.9,
options COMPAT_10 # NetBSD 1.0,
options COMPAT_11 # NetBSD 1.1,
Add ss, uk. Minor touchups.
1996-09-09 20:30:47 +04:00
options COMPAT_12 # NetBSD 1.2,
Add COMPAT_13.
1997-11-25 23:29:24 +03:00
options COMPAT_13 # NetBSD 1.3,
It's time to be COMPAT_14.
1999-07-29 14:37:12 +04:00
options COMPAT_14 # NetBSD 1.4,
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options COMPAT_43 # and 4.3BSD
Fix formatting glitch.
1998-02-20 02:21:33 +03:00
options COMPAT_386BSD_MBRPART # recognize old partition ID
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options COMPAT_SVR4 # binary compatibility with SVR4
options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
Fix typos. No functional changes.
2000-08-21 11:39:42 +04:00
#options COMPAT_PECOFF # kernel support to run Win32 apps
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# File systems
Adopt for new file system and root spec grammar.
1997-01-31 04:50:46 +03:00
file-system FFS # UFS
clean up the formatting of the ext2fs lines a bit.
1997-06-12 01:05:41 +04:00
file-system EXT2FS # second extended file system (linux)
Adopt for new file system and root spec grammar.
1997-01-31 04:50:46 +03:00
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
mark file system NTFS as experimental
1999-08-05 19:52:11 +04:00
file-system NTFS # Windows/NT file system (experimental)
Adopt for new file system and root spec grammar.
1997-01-31 04:50:46 +03:00
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
Add overlay to kernel configs.
2000-01-20 22:12:28 +03:00
file-system OVERLAY # overlay file system
Adopt for new file system and root spec grammar.
1997-01-31 04:50:46 +03:00
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
Add Coda
1998-10-06 05:44:11 +04:00
file-system CODA # Coda File System; also needs vcoda (below)
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# File system options
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options QUOTA # UFS quotas
Add "opl at ym" and "mpu at ym". Fix typos.
1999-10-06 12:13:17 +04:00
#options FFS_EI # FFS Endian Independent support
Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.
2000-06-23 00:27:49 +04:00
options SOFTDEP # FFS soft updates support.
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options NFSSERVER # Network File System server
Use '#options<SPACE><TAB>' for EXT2FS_SYSTEM_FLAGS and add the empty line before '#options GATEWAY'.
1997-06-12 11:05:49 +04:00
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
clean up the formatting of the ext2fs lines a bit.
1997-06-12 01:05:41 +04:00
# immutable) behave as system flags.
fix some typos and other misfeatures in comments; no functional change note that bha driver supports BT44x cards as well
1997-10-23 09:49:42 +04:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# Networking options
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
Integrate the IPv6 bits from GENERIC.v6
1999-11-13 20:54:17 +03:00
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
Comment out EON ISO-over-ip tunneling pseudo-driver, and document as broken/fragile. Unlikely to be of much use, and confuses new users when their system crashes when they, or their dhclient stumble over it. See kern/10500, kern/8994 for the gory details.
2000-07-05 08:07:22 +04:00
#options EON # OSI tunneling over IP
Adjust options statements so that if they are commented out or uncommented, it doesn't screw up indentation.
1997-06-25 08:41:15 +04:00
options CCITT,LLC,HDLC # X.25
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
options NETATALK # AppleTalk networking protocols
enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG on the GENERIC kernels that had them commented out. XXX: Please note, that not all the kernels have all the options defined!
1999-07-20 11:40:34 +04:00
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
fix some typos and other misfeatures in comments; no functional change note that bha driver supports BT44x cards as well
1997-10-23 09:49:42 +04:00
# Compatibility with 4.2BSD implementation of TCP/IP. Not recommended.
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
#options TCP_COMPAT_42
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options EISAVERBOSE # verbose EISA device autoconfig messages
Add (sometimes commented out) MIIVERBOSE option.
2000-05-08 17:49:44 +04:00
options MIIVERBOSE # verbose PHY autoconfig messages
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
options PCIVERBOSE # verbose PCI device autoconfig messages
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.
2000-03-22 03:58:16 +03:00
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
options SCSIVERBOSE # human readable SCSI error messages
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
options USBVERBOSE # verbose USB device autoconfig messages
add commented out pnpbios entries
1999-11-14 16:31:04 +03:00
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
Fix typos. No functional changes.
2000-08-21 11:39:42 +04:00
#options PNPBIOSDEBUG # more fulsome Pnp BIOS debugging messages
Add uscanner.
2000-11-14 22:52:04 +03:00
options I2OVERBOSE # verbose I2O driver messages
Alphabetize.
2000-08-04 15:51:37 +04:00
Enable DHCP by default, rather than BOOTP, as BOOTP is much more likely to fail (due to option length issues), and DHCP is now prevalent.
1999-11-06 19:23:49 +03:00
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
enable diskless boot with BOOTP and BOOTPARAM configuration
1998-01-09 18:18:50 +03:00
add prototype WSDISPLAY_DEFAULTSCREENS option, improve wscons related comments
1999-03-16 19:31:54 +03:00
#
make wscons the default
1999-01-30 16:44:25 +03:00
# wscons options
add prototype WSDISPLAY_DEFAULTSCREENS option, improve wscons related comments
1999-03-16 19:31:54 +03:00
#
# builtin terminal emulations
make wscons the default
1999-01-30 16:44:25 +03:00
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_GREEN
add a commented out WS_KERNEL_BG option, closes PR port-i386/7271 by Charlie Root <root@theprovider.com>
1999-03-29 23:57:34 +04:00
#options WS_KERNEL_BG=WSCOL_BLACK
add prototype WSDISPLAY_DEFAULTSCREENS option, improve wscons related comments
1999-03-16 19:31:54 +03:00
# compatibility to other console drivers
make wscons the default
1999-01-30 16:44:25 +03:00
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
Add a missing tab for cosmetic purposes.
1999-02-01 04:36:21 +03:00
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
make wscons the default
1999-01-30 16:44:25 +03:00
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
add prototype WSDISPLAY_DEFAULTSCREENS option, improve wscons related comments
1999-03-16 19:31:54 +03:00
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
Document PCDISPLAY_SOFTCURSOR.
1999-09-20 01:50:05 +04:00
# use a large software cursor that doesn't blink
use "options \t" instead of "options\t\t" to avoid change in column when you comment an option out.
1999-10-25 20:47:03 +04:00
options PCDISPLAY_SOFTCURSOR
add (commented out) entry for WSCONS_DEFAULT_TYPE
2000-09-10 15:48:38 +04:00
# modify the screen type of the console; defaults to "80x25"
WSCONS_DEFAULT_TYPE is obsolete; use VGA_CONSOLE_SCREENTYPE instead.
2000-10-15 14:08:00 +04:00
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
make wscons the default
1999-01-30 16:44:25 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
Attach isa, eisa, and pci to mainbus now, rather than root. The i386 now has a single device tree (rather than a forest). Also, attach EISA only if it's present, and attach in order: PCI, EISA, ISA (most specific to least specific).
1996-03-04 06:25:48 +03:00
mainbus0 at root
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
#apm0 at mainbus0 # Advanced power management
add Advanced Power Management driver Includes bootstrap support from FreeBSD (Tatsumi HOSOKAWA and <ukai>)
1996-08-26 03:38:57 +04:00
add (commented out) APM options
1999-11-11 01:39:45 +03:00
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
Change comment: APM_POWER_PRINT _does_ print stats on the console.
2000-06-16 14:31:03 +04:00
#options APM_POWER_PRINT # Print stats on the console
beautify APM_DISABLE_INTERRUPTS line (s/options\t/options \t/)
2000-03-06 21:45:42 +03:00
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
add (commented out) APM options
1999-11-11 01:39:45 +03:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Basic Bus Support
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
# Plug-and-Play BIOS and attached devices
#pnpbios* at mainbus?
# mainboard audio chips
pnpbios from 1.344 didn't config. s/pnpbios0/pnpbios?/
2000-05-29 01:12:00 +04:00
#ess* at pnpbios? index ? # ESS AudioDrive
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
#ym* at pnpbios? index ? # OPL3-SA3
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
pnpbios from 1.344 didn't config. s/pnpbios0/pnpbios?/
2000-05-29 01:12:00 +04:00
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt* at pnpbios? index ? # parallel ports
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
#fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
White-space improvements.
2000-07-03 05:17:35 +04:00
#pciide* at pnpbios? index ?
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci devices are now specified like "foo* at pci? dev ? function ?". also, add support for PPB's and secondary PCI busses, where appropriate.
1996-02-28 05:02:29 +03:00
pci* at ppb? bus ?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Add (commented out) PCIBIOS options so people can find them easily.
2000-02-27 19:51:39 +03:00
# Configure PCI using BIOS information
#options PCIBIOS # PCI BIOS support
#options PCIBIOSVERBOSE # PCI BIOS verbose info
add commented out PCIBIOS_INTR_GUESS
2000-08-11 01:33:17 +04:00
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
Add (commented out) PCIBIOS options so people can find them easily.
2000-02-27 19:51:39 +03:00
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
hexadecimal constant in "options" value doesn't need quotation.
2000-07-18 15:41:32 +04:00
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
add commented out PCIBIOS_INTR_GUESS
2000-08-11 01:33:17 +04:00
#options PCIBIOS_INTR_GUESS # see pcibios(4)
fix typo
2000-03-09 19:49:22 +03:00
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
Add (commented out) PCIBIOS options so people can find them easily.
2000-02-27 19:51:39 +03:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# PCI bridges
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
pchb* at pci? dev ? function ? # PCI-Host bridges
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 10:53:26 +03:00
pceb* at pci? dev ? function ? # PCI-EISA bridges
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
pcib* at pci? dev ? function ? # PCI-ISA bridges
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
ppb* at pci? dev ? function ? # PCI-PCI bridges
add device declarations for 'puc'-related devices. Add lpt attaching to puc to the files file, because it can't go in files.pci (see comments here or there).
1998-06-26 22:58:38 +04:00
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# EISA bus support
eisa* at mainbus?
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 10:53:26 +03:00
eisa* at pceb?
Update for pchb and pcib drivers.
1996-11-28 06:15:13 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# ISA bus support
isa* at mainbus?
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 10:53:26 +03:00
isa* at pceb?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
isa* at pcib?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
Add tcic PCMCIA controller.
1999-03-23 23:08:55 +03:00
pcmcia* at tcic? controller ? socket ?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA PCMCIA controllers
Change the size of the PCMCIA controller memory window to 64K. Several of the radio LAN cards need it.
2000-02-02 22:48:18 +03:00
pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Add "pcic0 at pci?".
1998-12-20 20:56:18 +03:00
# PCI PCMCIA controllers
pcic0 at pci? dev? function ?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA Plug-and-Play bus support
isapnp0 at isa?
pci devices are now specified like "foo* at pci? dev ? function ?". also, add support for PPB's and secondary PCI busses, where appropriate.
1996-02-28 05:02:29 +03:00
Add ISA Plug and Play attachment for PCIC PCMCIA controller (pcic* at isapnp?). Slightly modify ISA attachment to let the two share code.
1998-06-07 22:34:38 +04:00
# ISA Plug-and-Play PCMCIA controllers
pcic* at isapnp?
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
# CardBus bridge support
Due to popular demand (hi Bernd), comment out the CardBus entries. Appearently it doesn't work for some chipsets. I think the right way to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 23:39:35 +03:00
#cbb* at pci? dev ? function ?
#cardslot* at cbb?
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
# CardBus bus support
Due to popular demand (hi Bernd), comment out the CardBus entries. Appearently it doesn't work for some chipsets. I think the right way to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 23:39:35 +03:00
#cardbus* at cardslot?
#pcmcia* at cardslot?
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
Remove pcvt tentacles.
2000-06-11 06:41:10 +04:00
# ISA console
make wscons the default
1999-01-30 16:44:25 +03:00
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
Document FRENCH_KBD,GERMAN_KBD,NORVEGIAN_KBD options.
1998-07-27 17:39:51 +04:00
# Keyboard layout configuration for pccons
Correct indent.
1998-07-27 22:42:27 +04:00
#options FRENCH_KBD
Ops, forgot FINNISH_KBD.
1998-07-27 22:38:07 +04:00
#options FINNISH_KBD
Correct indent.
1998-07-27 22:42:27 +04:00
#options GERMAN_KBD
NORVEGIAN -> NORWEGIAN
1998-07-28 03:55:23 +04:00
#options NORWEGIAN_KBD
Remove pcvt tentacles.
2000-06-11 06:41:10 +04:00
# pccons-specific options:
Comment out XSERVER and XSERVER_DDB and move them to the pccons-specific section. They are not used with wscons.
2000-05-14 08:36:09 +04:00
#options XSERVER_DDB # PF12 gets you into DDB when X is running
#options XSERVER # X server support
Document FRENCH_KBD,GERMAN_KBD,NORVEGIAN_KBD options.
1998-07-27 17:39:51 +04:00
make wscons the default
1999-01-30 16:44:25 +03:00
# wscons
Optical cleanup in WSCONS configuration section.
1999-07-03 16:09:52 +04:00
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
make wscons the default
1999-01-30 16:44:25 +03:00
# "opms" should not be enabled together with "pms" or "pmsi"
Use wsmouse protocol for PS/2, Logitech bus and Microsoft InPort mice by default. The X11 distribution included in our last release already supports it and the wsmouse protocol can be used for any of the above and for USB mice.
1999-07-22 00:28:45 +04:00
pms* at pckbc? # PS/2 mouse for wsmouse
Add opl* at wss?
1999-08-15 01:20:45 +04:00
pmsi* at pckbc? # PS/2 "Intelli"mouse for wsmouse
Use wsmouse protocol for PS/2, Logitech bus and Microsoft InPort mice by default. The X11 distribution included in our last release already supports it and the wsmouse protocol can be used for any of the above and for USB mice.
1999-07-22 00:28:45 +04:00
#opms* at pckbc? # backwards compatible PS/2 mouse
make wscons the default
1999-01-30 16:44:25 +03:00
vga0 at isa?
Some whitespace changes.
2000-03-15 01:37:55 +03:00
vga* at pci? dev ? function ?
make wscons the default
1999-01-30 16:44:25 +03:00
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
Optical cleanup in WSCONS configuration section.
1999-07-03 16:09:52 +04:00
wskbd* at pckbd? console ?
Make two wsmux pseudo devices and add mux locators.
1999-07-29 23:36:58 +04:00
wsmouse* at pms? mux 0
wsmouse* at pmsi? mux 0
make wscons the default
1999-01-30 16:44:25 +03:00
Some whitespace changes.
2000-03-15 01:37:55 +03:00
pcppi0 at isa?
-"spkr" now attaches to "pcppi" -"le at isa" is split into "depca", "nele" and "bicc"
1998-04-17 02:01:41 +04:00
sysbeep0 at pcppi?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Serial Devices
# PCI serial interfaces
s/16x450/16x50/
1999-12-12 14:51:29 +03:00
com* at puc? port ? # 16x50s on "universal" comm boards
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
Add Cyclades-Z serial.
2000-05-17 22:08:50 +04:00
cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA Plug-and-Play serial interfaces
com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
com* at pcmcia? function ? # Modems and serial cards
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Add pcmcom driver and com slaves.
1998-10-11 01:58:22 +04:00
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
com* at pcmcom? slave ? # ...and the slave devices
add com at cardbus comment
2000-04-13 15:20:06 +04:00
# CardBus serial interfaces
White-space improvements.
2000-07-03 05:17:35 +04:00
#com* at cardbus? dev ? function ? # Modems and serial cards
add com at cardbus comment
2000-04-13 15:20:06 +04:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# ISA serial interfaces
Add (commented out) COM_HAYESP option, per pr-2189 from John Vinopal
1997-08-04 01:59:11 +04:00
#options COM_HAYESP # adds Hayes ESP serial board support
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
Rearrange slightly.
1994-11-03 21:27:13 +03:00
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
Add boca, makeoptions.
1995-01-11 23:59:50 +03:00
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
update for new commulti->com attach interface. com ports at 'ast' multiport cards no longer need 'flags 1', because the "don't set IEN" requirement is communicated by the commulti_attach_args. com.c no longer recognizes 'flags 1' at all.
1996-03-10 12:03:13 +03:00
#com* at ast? slave ?
Add boca, makeoptions.
1995-01-11 23:59:50 +03:00
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
add lines for boca 16-port serial card (BB2016), commented out.
1999-12-26 20:07:23 +03:00
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
Add a commented out entry for tcom.
1998-12-16 14:42:07 +03:00
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
Fix the entries for the cyclades multiport serial cards, but leave commented out, like the other multiport cards
1996-09-24 23:10:41 +04:00
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
Add (commented out) addcom0 and com* at addcom?
2000-04-21 21:52:06 +04:00
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
add moxa0 at isa entry, marked as experimental This was not added also to other config files primarily because the driver is not properly tested yet; this entry is primarily meant as an example for those brave souls who want to try moxa.
2000-11-20 22:53:43 +03:00
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental)
#com* at moxa? slave ?
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
White-space improvements.
2000-07-03 05:17:35 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Parallel Printer Interfaces
Add config for PSS
1995-04-18 02:44:38 +04:00
add device declarations for 'puc'-related devices. Add lpt attaching to puc to the files file, because it can't go in files.pci (see comments here or there).
1998-06-26 22:58:38 +04:00
# PCI parallel printer interfaces
lpt* at puc? port ? # || ports on "universal" comm boards
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA parallel printer interfaces
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
lpt1 at isa? port 0x278
lpt2 at isa? port 0x3bc
White-space improvements.
2000-07-03 05:17:35 +04:00
# Hardware monitors
Add (commented out) lm driver examples
2000-03-09 07:12:42 +03:00
# LM7[89] and compatible hardware monitors
clean up lm0 example
2000-03-10 09:03:18 +03:00
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
Make a real GENERIC config.
1994-11-03 21:14:50 +03:00
add viaenv template
2000-05-08 22:41:26 +04:00
# VIA VT82C686A hardware monitor
Disable the viaenv driver and remove the siop entry which was added in the last commit.
2000-05-19 14:23:36 +04:00
#viapm* at pci? dev ? function ?
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
#viaenv* at viapm?
add viaenv template
2000-05-08 22:41:26 +04:00
Add uscanner.
2000-11-14 22:52:04 +03:00
Add I2O stuff.
2000-11-08 22:50:07 +03:00
# I2O devices
iop* at pci? dev ? function ? # I/O processor
iopsp* at iop? tid ? # SCSI/FC-AL ports
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
ld* at iop? tid ? # block devices
White-space improvements.
2000-07-03 05:17:35 +04:00
Add uscanner.
2000-11-14 22:52:04 +03:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# SCSI Controllers and Devices
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# PCI SCSI controllers
Add support for AdvanSys Ultra Wide boards
1998-09-26 20:38:43 +04:00
adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
Update comment in adw*
2000-04-30 23:08:19 +04:00
adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
bha* at pci? dev ? function ? # BusLogic 9xx SCSI
Note DPT controllers as needed. If it looks like a stripped down GENERIC, it gets it.
1999-09-28 03:59:50 +04:00
dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
Make siop the default instead of ncr. The siop driver has proven to be reliable, and, although it does not do tagged queueing yet, this makes it a better choice.
2000-06-09 01:42:14 +04:00
#ncr* at pci? dev ? function ? # NCR 53c8xx SCSI (old driver)
siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
Add the `pcscp' driver.
1999-01-07 02:30:53 +03:00
pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# EISA SCSI controllers
ahb* at eisa? slot ? # Adaptec 174[02] SCSI
ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
bha* at eisa? slot ? # BusLogic 7xx SCSI
Enable large cursor by default (at least on i386 for the moment), in response to result of poll on tech-kern.
1999-10-07 03:01:45 +04:00
dpt* at eisa? slot ? # DPT EATA SCSI
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
uha* at eisa? slot ? # UltraStor 24f SCSI
Pull marc-pcmcia branch down from trunk.
1997-10-17 03:32:35 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# PCMCIA SCSI controllers
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
Add esp at pcmcia.
2000-03-20 01:32:59 +03:00
esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Add entry for aic* at isapnp.
1998-04-03 08:35:05 +04:00
# ISA Plug-and-Play SCSI controllers
add aha at isapnp?
1998-11-23 23:47:03 +03:00
aha* at isapnp? # Adaptec AHA-154[02
Add entry for aic* at isapnp.
1998-04-03 08:35:05 +04:00
aic* at isapnp? # Adaptec AHA-1520B
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA SCSI controllers
Edit adv0 comment to include "SCSI"; now 'grep -v -i SCSI GENERIC' works.
2000-08-16 00:09:26 +04:00
adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02] SCSI
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
aha1 at isa? port 0x334 irq ? drq ?
ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
fix some typos and other misfeatures in comments; no functional change note that bha driver supports BT44x cards as well
1997-10-23 09:49:42 +04:00
bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
bha1 at isa? port 0x334 irq ? drq ?
- Attach dpt0 to the isa bus. Commented out since (a) at any valid address it conflicts with too much other stuff (b) if I UTSLed correctly, EISA boards may be picked up at an "ISA address and an EISA address" - I don't have enough info on this yet to fix it (c) a DPT HBA at an address usually assigned to wdc0/1 may get detected as a WD100x controller. Some of them can emulate a WD100x controller, but the one I tested with doesn't. - Sync with GENERIC just a little.
2000-02-24 21:49:40 +03:00
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
Fix typos. No functional changes.
2000-08-21 11:39:42 +04:00
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 controller
comment out "ncr* at isa?" (NCR 53C80 - cheap SCSI) in the standard config files. The probe funktion gives false hits and steps onto other hardware. (PR port-i386/8361 by cgd and my own experience)
1999-10-06 16:21:43 +04:00
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
from Dave Burgess per PR4620: -base address 0x308 is supported by more Wangtek QIC tapes than 0x300 -Ultrastor ISA SCSI adapters can't be set to base address 0x334 (changed to 0x340)
1998-01-14 18:27:43 +03:00
uha1 at isa? port 0x340 irq ? drq ?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
wds1 at isa? port 0x358 irq 11 drq 5
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
# CardBus SCSI cards
Due to popular demand (hi Bernd), comment out the CardBus entries. Appearently it doesn't work for some chipsets. I think the right way to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 23:39:35 +03:00
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# SCSI bus support
Add AdvanSys SCSI controller
1998-08-26 18:27:44 +04:00
scsibus* at adv?
Add support for AdvanSys Ultra Wide boards
1998-09-26 20:38:43 +04:00
scsibus* at adw?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
scsibus* at aha?
scsibus* at ahb?
scsibus* at ahc?
scsibus* at aic?
scsibus* at bha?
Note DPT controllers as needed. If it looks like a stripped down GENERIC, it gets it.
1999-09-28 03:59:50 +04:00
scsibus* at dpt?
Add scsibus at esp.
2000-03-20 01:35:43 +03:00
scsibus* at esp?
Add I2O stuff.
2000-11-08 22:50:07 +03:00
scsibus* at iopsp?
Sort.
2000-11-09 00:47:25 +03:00
scsibus* at isp?
forgot to comment out the orphaned "scsibus"
1999-10-08 17:53:00 +04:00
#scsibus* at nca?
Make siop the default instead of ncr. The siop driver has proven to be reliable, and, although it does not do tagged queueing yet, this makes it a better choice.
2000-06-09 01:42:14 +04:00
#scsibus* at ncr?
Add the `pcscp' driver.
1999-01-07 02:30:53 +03:00
scsibus* at pcscp?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
scsibus* at sea?
Make siop the default instead of ncr. The siop driver has proven to be reliable, and, although it does not do tagged queueing yet, this makes it a better choice.
2000-06-09 01:42:14 +04:00
scsibus* at siop?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
scsibus* at uha?
scsibus* at wds?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
Fixed typo in ses comment - devies -> devices
2000-05-25 05:34:18 +04:00
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
Alphabetize.
2000-06-11 04:21:01 +04:00
ss* at scsibus? target ? lun ? # SCSI scanners
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
uk* at scsibus? target ? lun ? # SCSI unknown
cac* at eisa? reported as working.
2000-09-26 15:51:14 +04:00
Attach cac* at pci?, ca* at cac?. Commented out where needs be.
2000-03-16 18:05:18 +03:00
# RAID controllers and devices
cac* at eisa? reported as working.
2000-09-26 15:51:14 +04:00
cac* at eisa? # Compaq EISA array controllers
cac* at pci? dev ? function ? # Compaq PCI array controllers
- ca -> lsu - Hook in twe.
2000-10-19 18:32:20 +04:00
twe* at pci? dev ? function ? # 3ware Escalade RAID controllers
lsu -> ld, by popular request.
2000-11-26 20:44:02 +03:00
ld* at cac? unit ? # Compaq array disk devices
ld* at twe? unit ? # 3ware array disk devices
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
White-space improvements.
2000-07-03 05:17:35 +04:00
Update IDE comments, from yoavcs@inter.net.il
1999-02-16 20:46:17 +03:00
# IDE and related devices
Typo.
1999-03-27 14:42:12 +03:00
# PCI IDE controllers - see pciide(4) for supported hardware.
Add config flags for pciide: 0x001 forces the use of DMA when the driver don't know how to set the controller's modes.
1998-10-22 19:11:39 +04:00
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
Some whitespace changes.
2000-03-15 01:37:55 +03:00
pciide* at pci? dev ? function ? flags 0x0000
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
Add wdc* at isapnp?.
1998-01-23 23:42:34 +03:00
# ISA Plug-and-Play IDE controllers
Remove useless 'flags' for wdc ata isapnp.
1998-10-19 16:06:55 +04:00
wdc* at isapnp?
Add wdc* at isapnp?.
1998-01-23 23:42:34 +03:00
Add wdc* at pcmcia.
1998-01-23 04:16:03 +03:00
# PCMCIA IDE controllers
Remove space at the end of line.
1998-10-13 07:57:27 +04:00
wdc* at pcmcia? function ?
Add wdc* at pcmcia.
1998-01-23 04:16:03 +03:00
Merge bouyer-ide
1998-10-12 20:09:10 +04:00
# ISA ST506, ESDI, and IDE controllers
Document the 'wdc at isa' flags.
1999-05-19 18:41:54 +04:00
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
Add "opl at ym" and "mpu at ym". Fix typos.
1999-10-06 12:13:17 +04:00
# fall back to 16bits I/O if 32bits I/O are not functional).
Document the 'wdc at isa' flags.
1999-05-19 18:41:54 +04:00
# Some controllers pass the initial 32bit test, but will fail later.
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
wdc1 at isa? port 0x170 irq 15 flags 0x00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
Update IDE comments, from yoavcs@inter.net.il
1999-02-16 20:46:17 +03:00
# IDE drives
# Flags are used only with controllers that support DMA operations
Document the use of flags to set/disable PIO/DMA/UDMA modes.
1998-12-02 13:54:26 +03:00
# and mode settings (e.g. some pciide controllers)
Update IDE comments, from yoavcs@inter.net.il
1999-02-16 20:46:17 +03:00
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
Document the use of flags to set/disable PIO/DMA/UDMA modes.
1998-12-02 13:54:26 +03:00
wd* at wdc? channel ? drive ? flags 0x0000
wd* at pciide? channel ? drive ? flags 0x0000
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# ATAPI bus support
Merge bouyer-ide
1998-10-12 20:09:10 +04:00
atapibus* at wdc? channel ?
Add and enable the pciide driver.
1998-11-10 17:09:15 +03:00
atapibus* at pciide? channel ?
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# ATAPI devices
Document the use of flags to set/disable PIO/DMA/UDMA modes.
1998-12-02 13:54:26 +03:00
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
Update comment regarding conflict between wt driver and SMC ethernet boards. Closes PR 4481 by Erik Bertelsen.
1998-06-24 09:38:09 +04:00
# note: the wt driver conflicts unpleasantly with SMC boards at the
fix some typos and other misfeatures in comments; no functional change note that bha driver supports BT44x cards as well
1997-10-23 09:49:42 +04:00
# same I/O address. The probe reprograms their EEPROMs. Don't
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# uncomment it unless you are actually using it.
from Dave Burgess per PR4620: -base address 0x308 is supported by more Wangtek QIC tapes than 0x300 -Ultrastor ISA SCSI adapters can't be set to base address 0x334 (changed to 0x340)
1998-01-14 18:27:43 +03:00
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Network Interfaces
# PCI network interfaces
de* at pci? dev ? function ? # DEC 21x4x-based Ethernet
en* at pci? dev ? function ? # ENI/Adaptec ATM
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards.
1998-11-04 03:31:59 +03:00
ep* at pci? dev ? function ? # 3Com 3c59x
ex* at pci? dev ? function ? # 3Com 90x[B]
Add epic* at pci?
1998-06-02 05:43:33 +04:00
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
turn on Essential HIPPI for this configuration
1998-06-04 01:17:52 +04:00
esh* at pci? dev ? function ? # Essential HIPPI card
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
fpa* at pci? dev ? function ? # DEC DEFPA FDDI
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
le* at pci? dev ? function ? # PCnet-PCI Ethernet
Alphabetize.
2000-05-21 01:34:48 +04:00
lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
add ntwoc* at pci, and a commented out ntwoc0 at isa.
2000-01-04 09:58:54 +03:00
ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
Alphabetize.
2000-05-21 01:34:48 +04:00
rtk* at pci? dev ? function ? # Realtek 8129/8139
Add the "sip" driver (SiS 900 Ethernet).
1999-08-03 07:23:28 +04:00
sip* at pci? dev ? function ? # SiS 900 Ethernet
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
Correct spelling of 'ThunderLAN'
1997-10-21 10:01:16 +04:00
tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
Add Megahertz Ethernet/Modem combo card goo.
1999-09-28 22:07:29 +04:00
tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
Add tlp, document TLP_MATCH_* options, and add some missing PHYs.
1999-11-06 00:36:21 +03:00
#options TLP_MATCH_21040
#options TLP_MATCH_21041
#options TLP_MATCH_21140
#options TLP_MATCH_21142
Add vr driver.
1999-01-22 08:40:16 +03:00
vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# EISA network interfaces
ep* at eisa? slot ? # 3Com 3c579 Ethernet
fea* at eisa? slot ? # DEC DEFEA FDDI
Add tlp, document TLP_MATCH_* options, and add some missing PHYs.
1999-11-06 00:36:21 +03:00
tlp* at eisa? slot ? # DEC DE-425 Ethernet
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA Plug-and-Play network interfaces
ep* at isapnp? # 3Com 3c509 Ethernet
ne* at isapnp? # NE2000-compatible Ethernet
Add IBM and 3COM ISA Token-Ring drivers.
1999-03-23 02:43:30 +03:00
tr* at isapnp? # IBM/3COM TROPIC Token-Ring
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# PCMCIA network interfaces
Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. This is very adhoc work for IETF meeting. - Since it seems that 'an' and 'wi' have similar hardware, low level functions should be shared. - There are PCI/ISA cards of Aironet but not supported yet. - The wiconfig interface is changed so that wiconfig cannot be used. - 'ancontrol' of FreeBSD is not ported. - Only infrastructure mode is tested. - WEP is not supported. Though I only have an Aironet card, Cisco card should be expected to work.
2000-12-12 02:16:50 +03:00
an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
Update awi driver, which now supports AMD 79c930 based 802.11 DS cards as well as 802.11 FH cards. Also, it can operate in infrastructure mode, adhoc mode, and wi(4) (aka WaveLAN/IEEE) compatible adhoc mode.
2000-03-22 14:22:20 +03:00
awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
add cnw* into pcmcia section.
1999-11-29 15:56:25 +03:00
cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
Add entry for mbe* at pcmcia.
1998-04-03 08:29:13 +04:00
mbe* at pcmcia? function ? # MB8696x based Ethernet
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
ne* at pcmcia? function ? # NE2000-compatible Ethernet
Add Raytheon Raylink driver.
2000-01-24 04:09:57 +03:00
ray* at pcmcia? function ? # Raytheon Raylink (802.11)
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
sm* at pcmcia? function ? # Megahertz Ethernet
Add wi at pcmcia.
1999-08-09 22:13:26 +04:00
wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11)
Replace references to xe with xi. Clarify description to avoid confusion with the Xircom tlp-based cards.
2000-06-06 03:18:50 +04:00
xi* at pcmcia? function ? # Xircom CreditCard Ethernet
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
Add Megahertz Ethernet/Modem combo card goo.
1999-09-28 22:07:29 +04:00
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA network interfaces
Add entries for ate0 and fmv0 (former is tested but latter is not). Remove fe0.
1998-04-03 08:23:50 +04:00
ate0 at isa? port 0x2a0 irq ? # AT1700
Add cs0 at isa? port 0x300, wildcard IRQ and memory address, to pull them from the EEPROM. Wildcard DRQ to force memory-mode operation; this value is not available in the EEPROM and must be configured manually.
1998-07-27 05:51:29 +04:00
cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
Add "ec" driver.
1997-11-02 04:02:23 +03:00
ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
Add locators for "eg0" device, and enable it.
1997-11-11 08:53:06 +03:00
eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
`ep' has `plug-and-play' support on all buses, including non-PnP ISA. Attach ep* at isa instead of ep0, so we will autoconfigure all 3c5x9s.
2000-05-28 06:42:16 +04:00
ep* at isa? port ? irq ? # 3C509 ethernet cards
Replace monolithic `ie0' and `ie1' driver by `ef', `ix', `ai' front-ends.
1998-02-28 02:57:31 +03:00
ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
Add entries for ate0 and fmv0 (former is tested but latter is not). Remove fe0.
1998-04-03 08:23:50 +04:00
fmv0 at isa? port 0x2a0 irq ? # FMV-180 series
Replace monolithic `ie0' and `ie1' driver by `ef', `ix', `ai' front-ends.
1998-02-28 02:57:31 +03:00
ix0 at isa? port 0x300 irq 10 # EtherExpress/16
-point to console(4) manpage for serial console parameters (suggested by Chuck Cranor) -insert a reasonable IO base address for "iy at isa" (from Ignatios Souvatzis)
1997-11-11 23:31:38 +03:00
iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
Put lc0 at i/o 0x320.
1997-11-17 06:39:42 +03:00
lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
-"spkr" now attaches to "pcppi" -"le at isa" is split into "depca", "nele" and "bicc"
1998-04-17 02:01:41 +04:00
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
There are NE2100 compatible cards which cannot IRQ 10. Use IRQ 9 in the default configuration. (Thanks to Rick Byers <rickb@iaw.on.ca>.)
1998-04-20 14:58:01 +04:00
nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
-"spkr" now attaches to "pcppi" -"le at isa" is split into "depca", "nele" and "bicc"
1998-04-17 02:01:41 +04:00
le* at nele?
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
-"spkr" now attaches to "pcppi" -"le at isa" is split into "depca", "nele" and "bicc"
1998-04-17 02:01:41 +04:00
bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
le* at bicc?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
ne1 at isa? port 0x300 irq 10
Add sm0 at isa? port 0x300 irq 10
1997-11-05 21:13:10 +03:00
sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
Add IBM and 3COM ISA Token-Ring drivers.
1999-03-23 02:43:30 +03:00
tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
Delete "ed" driver, add "we".
1997-11-04 00:33:33 +03:00
we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
we1 at isa? port 0x300 iomem 0xcc000 irq 10
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
# CardBus network cards
Due to popular demand (hi Bernd), comment out the CardBus entries. Appearently it doesn't work for some chipsets. I think the right way to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 23:39:35 +03:00
#ex* at cardbus? dev ? function ? # 3Com 3C575TX
#fxp* at cardbus? dev ? function ? # Intel i8255x
Changes the name of RealTek driver. The new name is `rtk'. This used to be called `rl' and it conflict with RL vax disks, canonical and historical unix driver name. This changes are minimal: it only changes the name of RealTek driver. The filename of source code and a lot of the letter `rl' in source files should be changed shortly.
2000-04-19 12:44:31 +04:00
#rtk* at cardbus? dev ? function ? # Realtek 8129/8139
Alphabetize.
2000-05-21 01:34:48 +04:00
#tlp* at cardbus? dev ? function ? # DECchip 21143
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
Adapt to MII changes.
1998-08-11 04:28:53 +04:00
# MII/PHY support
Tidy up a little, improve PnP BIOS section.
2000-05-29 00:11:59 +04:00
dmphy* at mii? phy ? # Davicom DM9101 PHYs
Add "exphy" and "lxtphy" drivers.
1998-10-24 04:46:17 +04:00
exphy* at mii? phy ? # 3Com internal PHYs
Add icsphy*.
1998-11-03 03:12:45 +03:00
icsphy* at mii? phy ? # Integrated Circuit Systems ICS1890
Adapt to MII changes.
1998-08-11 04:28:53 +04:00
inphy* at mii? phy ? # Intel 82555 PHYs
Add tlp, document TLP_MATCH_* options, and add some missing PHYs.
1999-11-06 00:36:21 +03:00
iophy* at mii? phy ? # Intel 82553 PHYs
Add "exphy" and "lxtphy" drivers.
1998-10-24 04:46:17 +04:00
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
Adapt to MII changes.
1998-08-11 04:28:53 +04:00
nsphy* at mii? phy ? # NS83840 PHYs
Add nsphyter.
1999-12-07 22:38:54 +03:00
nsphyter* at mii? phy ? # NS83843 PHYs
Adapt to MII changes.
1998-08-11 04:28:53 +04:00
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
Add sqphy.
1998-11-04 02:52:50 +03:00
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
Adapt to MII changes.
1998-08-11 04:28:53 +04:00
tlphy* at mii? phy ? # ThunderLAN PHYs
Add tlp, document TLP_MATCH_* options, and add some missing PHYs.
1999-11-06 00:36:21 +03:00
tqphy* at mii? phy ? # TDK Semiconductor PHYs
Add "ukphy".
1998-11-05 03:38:10 +03:00
ukphy* at mii? phy ? # generic unknown PHYs
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
White-space improvements.
2000-07-03 05:17:35 +04:00
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Controller and Devices
# PCI USB controllers
Add dev and function locators for the USB host controllers at pci.
1999-11-15 23:10:49 +03:00
ohci* at pci? dev ? function ? # Open Host Controller
Alphabetize.
2000-05-21 01:34:48 +04:00
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
# CardBus USB controllers
Due to popular demand (hi Bernd), comment out the CardBus entries. Appearently it doesn't work for some chipsets. I think the right way to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 23:39:35 +03:00
#ohci* at cardbus? dev ? function ? # Open Host Controller
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 23:17:13 +03:00
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB bus support
usb* at ohci?
Alphabetize.
2000-05-21 01:34:48 +04:00
usb* at uhci?
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Hubs
uhub* at usb?
Add ugen, a generic USB driver.
1998-12-08 18:52:31 +03:00
uhub* at uhub? port ? configuration ? interface ?
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Mice
Add ugen, a generic USB driver.
1998-12-08 18:52:31 +03:00
ums* at uhub? port ? configuration ? interface ?
Make two wsmux pseudo devices and add mux locators.
1999-07-29 23:36:58 +04:00
wsmouse* at ums? mux 0
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Keyboards
Add ugen, a generic USB driver.
1998-12-08 18:52:31 +03:00
ukbd* at uhub? port ? configuration ? interface ?
Make two wsmux pseudo devices and add mux locators.
1999-07-29 23:36:58 +04:00
wskbd* at ukbd? console ? mux 1
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Generic HID devices
Add ugen, a generic USB driver.
1998-12-08 18:52:31 +03:00
uhid* at uhub? port ? configuration ? interface ?
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Printer
Add ugen, a generic USB driver.
1998-12-08 18:52:31 +03:00
ulpt* at uhub? port ? configuration ? interface ?
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
Add umodem device.
1999-08-17 02:27:08 +04:00
# USB Modem
umodem* at uhub? port ? configuration ?
Update for the ucom(4) addition.
2000-01-25 11:31:56 +03:00
ucom* at umodem?
Add umodem device.
1999-08-17 02:27:08 +04:00
Add `umass'.
1999-08-29 20:55:48 +04:00
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
Add atapibus* at umass?
2000-04-03 04:03:28 +04:00
atapibus* at umass? channel ?
Add `umass'.
1999-08-29 20:55:48 +04:00
scsibus* at umass? channel ?
Add uaudio driver.
1999-09-09 16:33:43 +04:00
# USB audio
uaudio* at uhub? port ? configuration ?
Add some USB Ethernet adapters.
2000-01-16 16:59:38 +03:00
# USB Ethernet adapters
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
Add USB-Ethernet adapters.
2000-01-17 20:47:03 +03:00
cue* at uhub? port ? # CATC USB-EL1201A based adapters
Enable kue driver.
2000-01-17 05:04:01 +03:00
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
Add some USB Ethernet adapters.
2000-01-16 16:59:38 +03:00
Add upl(4) driver. Uncomment uvisor(4) driver.
2000-04-09 22:34:02 +04:00
# Prolofic PL2301/PL2302 host-to-host adapter
upl* at uhub? port ?
Add Rio 500 device.
2000-04-14 18:44:49 +04:00
Add FTDI FT8U100AX driver.
2000-04-14 18:53:32 +04:00
# Serial adapters
# FTDI FT8U100AX serial adapter
#uftdi* at uhub? port ?
#ucom* at uftdi? portno ?
Add Rio 500 device.
2000-04-14 18:44:49 +04:00
# Diamond Multimedia Rio 500
urio* at uhub? port ?
Add upl(4) driver. Uncomment uvisor(4) driver.
2000-04-09 22:34:02 +04:00
Add (commented out) uvisor driver.
2000-03-30 21:01:01 +04:00
# USB Handspring Visor
Add upl(4) driver. Uncomment uvisor(4) driver.
2000-04-09 22:34:02 +04:00
uvisor* at uhub? port ?
ucom* at uvisor?
Add (commented out) uvisor driver.
2000-03-30 21:01:01 +04:00
Add uscanner.
2000-11-14 22:52:04 +03:00
# USB scanners
uscanner* at uhub? port ?
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# USB Generic driver
The configuration and interface locators are pointless for the generic USB device.
1999-07-22 13:35:06 +04:00
ugen* at uhub? port ?
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
White-space improvements.
2000-07-03 05:17:35 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Audio Devices
Add Ensoniq AudioPCI driver.
1998-05-02 02:00:37 +04:00
# PCI audio devices
Add and enable auvia
2000-03-31 08:47:52 +04:00
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
Add auich(4) and neo(4).
2000-11-28 08:18:42 +03:00
auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio
Add Cirrus Logic CS4280 driver.
1999-12-13 23:22:53 +03:00
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
Add C-Media CMI8x38, cmpci.
2000-05-01 02:00:54 +04:00
cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
Add Ensoniq AudioPCI driver.
1998-05-02 02:00:37 +04:00
eap* at pci? dev ? function ? # Ensoniq AudioPCI
Add eso(4) and the devices attached to it.
1999-07-12 19:16:23 +04:00
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
Enable fms device again.
1999-11-02 02:27:56 +03:00
fms* at pci? dev ? function ? # Forte Media FM801
Add auich(4) and neo(4).
2000-11-28 08:18:42 +03:00
neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
Put neo* in alphabetical position.
2000-11-28 22:44:07 +03:00
sv* at pci? dev ? function ? # S3 SonicVibes
Add Ensoniq AudioPCI driver.
1998-05-02 02:00:37 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA Plug-and-Play audio devices
Add the PC speaker MIDI attachment.
1998-08-12 22:17:55 +04:00
ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
guspnp* at isapnp? # Gravis Ultra Sound PnP audio
sb* at isapnp? # SoundBlaster-compatible audio
Add wss on isapnp.
1998-07-29 16:36:47 +04:00
wss* at isapnp? # Windows Sound System
Add ym (Yamaha OPL3-SA3) driver.
1998-05-20 20:25:06 +04:00
ym* at isapnp? # Yamaha OPL3-SA3 audio
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA audio devices
disable the "aria" sound board per default until the problems with its "probe" functions are solved (gives false positives)
1999-04-17 20:50:26 +04:00
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
Add ess to isa attachment. The entry is commented out for the moment since I'm not sure how accurate the probe is.
1999-06-19 00:27:59 +04:00
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
Set soundblaster irq to 5 by default.
1998-07-10 00:59:38 +04:00
sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
Add (commented out) cms(4) driver.
2000-05-02 15:00:56 +04:00
#cms0 at isa? port 0x220 # Creative Music System
Add "opl at ym" and "mpu at ym". Fix typos.
1999-10-06 12:13:17 +04:00
# OPL[23] FM synthesizers
Add more opl attachments.
1998-08-26 17:37:49 +04:00
#opl0 at isa? port 0x388 # use only if not attached to sound card
Add eso(4) and the devices attached to it.
1999-07-12 19:16:23 +04:00
opl* at eso?
Add more opl attachments.
1998-08-26 17:37:49 +04:00
opl* at ess?
Enable fms device again.
1999-11-02 02:27:56 +03:00
opl* at fms?
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
opl* at sb?
Add sv driver.
1998-12-10 22:01:41 +03:00
opl* at sv?
Add opl* at wss?
1999-08-15 01:20:45 +04:00
opl* at wss?
Add "opl at ym" and "mpu at ym". Fix typos.
1999-10-06 12:13:17 +04:00
opl* at ym?
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Audio support
oops - forgot half of it
1999-04-17 20:52:06 +04:00
#audio* at aria?
Add and enable auvia
2000-03-31 08:47:52 +04:00
audio* at auvia?
Add auich(4) and neo(4).
2000-11-28 08:18:42 +03:00
audio* at auich?
Add Cirrus Logic CS4280 driver.
1999-12-13 23:22:53 +03:00
audio* at clcs?
Add C-Media CMI8x38, cmpci.
2000-05-01 02:00:54 +04:00
audio* at cmpci?
Use TAB instead of two space to indent.
1998-06-07 06:36:53 +04:00
audio* at eap?
Add eso(4) and the devices attached to it.
1999-07-12 19:16:23 +04:00
audio* at eso?
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
audio* at ess?
Enable fms device again.
1999-11-02 02:27:56 +03:00
audio* at fms?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
audio* at gus?
audio* at guspnp?
Add auich(4) and neo(4).
2000-11-28 08:18:42 +03:00
audio* at neo?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
audio* at pas?
audio* at sb?
audio* at sp?
Add sv driver.
1998-12-10 22:01:41 +03:00
audio* at sv?
Add uaudio driver.
1999-09-09 16:33:43 +04:00
audio* at uaudio?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
audio* at wss?
Add ym (Yamaha OPL3-SA3) driver.
1998-05-20 20:25:06 +04:00
audio* at ym?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
Alphabetize.
1999-08-02 21:44:59 +04:00
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
mpu* at eso?
Enable fms device again.
1999-11-02 02:27:56 +03:00
mpu* at fms?
Alphabetize.
1999-08-02 21:44:59 +04:00
mpu* at sb?
Add "opl at ym" and "mpu at ym". Fix typos.
1999-10-06 12:13:17 +04:00
mpu* at ym?
Add the MPU 401 ISA attachment.
1999-08-01 22:16:35 +04:00
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
# MIDI support
Add midi at clcs.
2000-08-01 12:16:54 +04:00
midi* at clcs? # Cirrus Logic CS4280 MIDI port
Alphabetize.
2000-08-04 15:51:37 +04:00
#midi* at cms? # Creative Music System
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl Closes PR kern/8729.
1999-11-01 23:43:12 +03:00
midi* at eap? # 137[01] MIDI port
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
midi* at mpu? # MPU 401
* Redo the way the way the MIDI driver attaches to audio devices. * Improve the midisyn layer a little. * Add a driver for the Yamaha OPL[23] FM synths. The opl driver is not finished yet; it sounds pretty awful. For some strange reason I cannot get any FM sound from my SB64 cards, but a regular SB16 works fine.
1998-08-18 01:16:09 +04:00
midi* at opl? # OPL FM synth
Move the mpu device declaration to conf/files. Let the mpu device attach at the sb device, and then midi at the mpu. Update the mpu at eso attachment.
1999-08-02 21:37:41 +04:00
midi* at pcppi? # MIDI interface to the PC speaker
midi* at sb? # SB1 MIDI port
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# The spkr driver provides a simple tone interface to the built in speaker.
-"spkr" now attaches to "pcppi" -"le at isa" is split into "depca", "nele" and "bicc"
1998-04-17 02:01:41 +04:00
#spkr0 at pcppi? # PC speaker
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
White-space improvements.
2000-07-03 05:17:35 +04:00
add bktr device
2000-05-07 04:41:06 +04:00
# TV cards
# Brooktree 848/849/878/879 based TV cards
bktr* at pci? dev ? function ?
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
White-space improvements.
2000-07-03 05:17:35 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Mice
# ISA busmice
Use wsmouse protocol for PS/2, Logitech bus and Microsoft InPort mice by default. The X11 distribution included in our last release already supports it and the wsmouse protocol can be used for any of the above and for USB mice.
1999-07-22 00:28:45 +04:00
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
lms1 at isa? port 0x238 irq 5
mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
mms1 at isa? port 0x238 irq 5
Make two wsmux pseudo devices and add mux locators.
1999-07-29 23:36:58 +04:00
wsmouse* at lms? mux 0
wsmouse* at mms? mux 0
make wscons the default
1999-01-30 16:44:25 +03:00
# backwards compatible versions
Use wsmouse protocol for PS/2, Logitech bus and Microsoft InPort mice by default. The X11 distribution included in our last release already supports it and the wsmouse protocol can be used for any of the above and for USB mice.
1999-07-22 00:28:45 +04:00
#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse
#olms1 at isa? port 0x238 irq 5
#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
#omms1 at isa? port 0x238 irq 5
make wscons the default
1999-01-30 16:44:25 +03:00
#opms0 at pc? irq 12 # PS/2 auxiliary port mouse
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Joysticks
# ISA Plug-and-Play joysticks
joy* at isapnp? # Game ports (usually on audio cards)
Added a PCI frontend for the legacy ISA joystick driver. Some PCI soundcards don't seem to use the generic gameport function with interface 0x10 used here, but have either an own BAR dedicated to this (i.e. Sonic Vibes or ESS Solo-1) or specify their own device (see PCI_PRODUCT_CREATIVELABS_SBJOY in sys/dev/pci/pcidevs.h). Probably these use a similar simple sheme and adding a frontend for them would be trivial, but I don't own any of these cards, so I didn't.
2000-03-26 19:36:48 +04:00
# PCI joysticks
joy* at pci? # Game ports (usually on audio cards)
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
# Pull in optional local configuration
Oops; include paths are relative to $S.
1996-09-09 21:18:47 +04:00
include "arch/i386/conf/GENERIC.local"
Add a file for local additions to GENERIC.
1996-09-09 20:37:08 +04:00
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# Pseudo-Devices
# disk/mass storage pseudo-devices
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
pseudo-device ccd 4 # concatenated/striped disk devices
Added a (commented out) configuration line for the RAIDframe device driver.
1998-11-16 19:44:55 +03:00
#pseudo-device raid 4 # RAIDframe disk driver
Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.
2000-02-29 09:32:20 +03:00
#options RAID_AUTOCONFIG # auto-configuration of RAID components
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
Major cleanup of the GENERIC config file. The devices are laid out in a more readable manner now, and sorted by bus type.
1997-10-18 05:42:22 +04:00
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device tun 2 # network tunneling over tty
Enable gre(4) device
1998-09-14 01:02:02 +04:00
pseudo-device gre 2 # generic L3 over IP tunnel
Add "ipip" network interfaces.
1999-01-23 01:47:16 +03:00
pseudo-device ipip 2 # IP Encapsulation within IP (RFC 2003)
Integrate the IPv6 bits from GENERIC.v6
1999-11-13 20:54:17 +03:00
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}?
1999-11-21 17:00:37 +03:00
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
add stf pseudo interface (commented out due to possible security risks)
2000-04-19 10:50:27 +04:00
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
# miscellaneous pseudo-devices
don't specify number of ptys if >= 16 (current default initial number) pty comments: normalize and g/c what is no longer relevant
2000-09-24 19:59:26 +04:00
pseudo-device pty # pseudo-terminals
Yet Another Massive Reorganization. I took the last reorg even further. Devices are grouped by types and within the types segregated by bus. Lots of comments fixed up, lots of nits cleaned. Extensive comments from Jason and Charles incorporated. We also really need an automatic way to generate INSTALL from GENERIC, but that's a project for another day...
1997-10-20 00:14:21 +04:00
pseudo-device tb 1 # tablet line discipline
Add MIDI support. The MIDI devices can be accessed as ``raw'' through the /dev/rmidiN devices, or with a sequencer interface via /dev/music. So far the only supported MIDI device is the MPU401 port on SoundBlaster (and only on SB on isapnp, since we do not have locators with multiple values yet).
1998-08-07 04:00:55 +04:00
pseudo-device sequencer 1 # MIDI sequencer
remove EXPERIMENTAL comment, enable /dev/random in GENERIC kernels
1999-03-27 10:04:35 +03:00
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
Mark options RND_COM as broken on i386 port
1997-10-20 22:45:09 +04:00
#options RND_COM # use "com" randomness as well (BROKEN)
Get ready to add Coda
1998-09-09 00:56:08 +04:00
Change cfs/CFS in symbols, strings and constants to coda/CODA to avoid fs conflicts.
1998-09-12 19:05:47 +04:00
# a pseudo device needed for Coda # also needs CODA (above)
Add Coda
1998-10-06 05:44:11 +04:00
pseudo-device vcoda 4 # coda minicache <-> venus comm.
Make two wsmux pseudo devices and add mux locators.
1999-07-29 23:36:58 +04:00
# mouse & keyboard multiplexor pseudo-devices
pseudo-device wsmux 2