NetBSD/bin/kill/kill.c

319 lines
7.0 KiB
C
Raw Normal View History

/* $NetBSD: kill.c,v 1.29 2018/10/28 18:26:52 kre Exp $ */
1995-03-21 12:01:59 +03:00
1993-03-21 12:45:37 +03:00
/*
1994-09-22 13:24:46 +04:00
* Copyright (c) 1988, 1993, 1994
* The Regents of the University of California. All rights reserved.
1993-03-21 12:45:37 +03:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1993-03-21 12:45:37 +03:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
1997-07-20 21:34:50 +04:00
#include <sys/cdefs.h>
#if !defined(lint) && !defined(SHELL)
__COPYRIGHT("@(#) Copyright (c) 1988, 1993, 1994\
The Regents of the University of California. All rights reserved.");
1993-03-21 12:45:37 +03:00
#endif /* not lint */
#ifndef lint
1995-03-21 12:01:59 +03:00
#if 0
1995-09-07 10:28:39 +04:00
static char sccsid[] = "@(#)kill.c 8.4 (Berkeley) 4/28/95";
1995-03-21 12:01:59 +03:00
#else
__RCSID("$NetBSD: kill.c,v 1.29 2018/10/28 18:26:52 kre Exp $");
1995-03-21 12:01:59 +03:00
#endif
1993-03-21 12:45:37 +03:00
#endif /* not lint */
1994-09-22 13:24:46 +04:00
#include <ctype.h>
#include <err.h>
1993-03-21 12:45:37 +03:00
#include <errno.h>
1994-09-22 13:24:46 +04:00
#include <signal.h>
1993-03-21 12:45:37 +03:00
#include <stdio.h>
#include <stdlib.h>
#include <limits.h>
#include <inttypes.h>
1993-03-21 12:45:37 +03:00
#include <string.h>
#include <termios.h>
#include <unistd.h>
#include <locale.h>
#include <sys/ioctl.h>
#ifdef SHELL /* sh (aka ash) builtin */
2011-08-29 18:51:17 +04:00
int killcmd(int, char *argv[]);
#define main killcmd
#include "../../bin/sh/bltin/bltin.h"
#endif /* SHELL */
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
__dead static void nosig(const char *);
void printsignals(FILE *, int);
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
static int signum(const char *);
static pid_t processnum(const char *);
2011-08-29 18:51:17 +04:00
__dead static void usage(void);
1994-09-22 13:24:46 +04:00
int
main(int argc, char *argv[])
1993-03-21 12:45:37 +03:00
{
int errors;
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
int numsig;
pid_t pid;
const char *sn;
1993-03-21 12:45:37 +03:00
setprogname(argv[0]);
setlocale(LC_ALL, "");
1993-03-21 12:45:37 +03:00
if (argc < 2)
usage();
numsig = SIGTERM;
1994-09-22 13:24:46 +04:00
1993-07-22 20:42:16 +04:00
argc--, argv++;
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
/*
* Process exactly 1 option, if there is one.
*/
if (argv[0][0] == '-') {
switch (argv[0][1]) {
case 'l':
if (argv[0][2] != '\0')
sn = argv[0] + 2;
else {
argc--; argv++;
sn = argv[0];
}
if (argc > 1)
1994-09-22 13:24:46 +04:00
usage();
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
if (argc == 1) {
if (isdigit((unsigned char)*sn) == 0)
usage();
numsig = signum(sn);
if (numsig >= 128)
numsig -= 128;
if (numsig == 0 || signalnext(numsig) == -1)
nosig(sn);
sn = signalname(numsig);
if (sn == NULL)
errx(EXIT_FAILURE,
"unknown signal number: %d", numsig);
printf("%s\n", sn);
exit(0);
}
printsignals(stdout, 0);
1994-09-22 13:24:46 +04:00
exit(0);
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
case 's':
if (argv[0][2] != '\0')
sn = argv[0] + 2;
else {
argc--, argv++;
if (argc < 1) {
warnx(
"option requires an argument -- s");
usage();
}
sn = argv[0];
}
if (strcmp(sn, "0") == 0)
numsig = 0;
else if ((numsig = signalnumber(sn)) == 0) {
if (sn != argv[0])
goto trysignal;
nosig(sn);
}
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
argc--, argv++;
break;
case '-':
if (argv[0][2] == '\0') {
/* process this one again later */
break;
}
/* FALL THROUGH */
case '\0':
usage();
break;
default:
trysignal:
sn = *argv + 1;
if (((numsig = signalnumber(sn)) == 0)) {
if (isdigit((unsigned char)*sn))
numsig = signum(sn);
else
nosig(sn);
}
if (numsig != 0 && signalnext(numsig) == -1)
nosig(sn);
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
argc--, argv++;
break;
}
1993-03-21 12:45:37 +03:00
}
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
/* deal with the optional '--' end of options option */
if (argc > 0 && strcmp(*argv, "--") == 0)
argc--, argv++;
1994-09-22 13:24:46 +04:00
if (argc == 0)
1993-03-21 12:45:37 +03:00
usage();
1994-09-22 13:24:46 +04:00
for (errors = 0; argc; argc--, argv++) {
#ifdef SHELL
extern int getjobpgrp(const char *);
if (*argv[0] == '%') {
pid = getjobpgrp(*argv);
if (pid == 0) {
warnx("illegal job id: %s", *argv);
errors = 1;
continue;
}
} else
#endif
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
if ((pid = processnum(*argv)) == (pid_t)-1) {
errors = 1;
continue;
}
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
if (kill(pid, numsig) == -1) {
1994-09-22 13:24:46 +04:00
warn("%s", *argv);
1993-03-21 12:45:37 +03:00
errors = 1;
}
#ifdef SHELL
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
/*
* Wakeup the process if it was suspended, so it can
* exit without an explicit 'fg'.
* (kernel handles this for SIGKILL)
*/
if (numsig == SIGTERM || numsig == SIGHUP)
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
kill(pid, SIGCONT);
#endif
1993-03-21 12:45:37 +03:00
}
1994-09-22 13:24:46 +04:00
1993-03-21 12:45:37 +03:00
exit(errors);
1998-07-28 09:15:46 +04:00
/* NOTREACHED */
1993-03-21 12:45:37 +03:00
}
static int
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
signum(const char *sn)
1993-07-22 20:42:16 +04:00
{
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
intmax_t n;
char *ep;
n = strtoimax(sn, &ep, 10);
/* check for correctly parsed number */
if (*ep || n <= INT_MIN || n >= INT_MAX )
errx(EXIT_FAILURE, "illegal signal number: %s", sn);
/* NOTREACHED */
return (int)n;
}
1993-07-22 20:42:16 +04:00
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
static pid_t
processnum(const char *s)
{
intmax_t n;
char *ep;
n = strtoimax(s, &ep, 10);
/* check for correctly parsed number */
if (*ep || n == INTMAX_MIN || n == INTMAX_MAX || (pid_t)n != n ||
n == -1) {
warnx("illegal process%s id: %s", (n < 0 ? " group" : ""), s);
n = -1;
1993-07-22 20:42:16 +04:00
}
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
return (pid_t)n;
1993-07-22 20:42:16 +04:00
}
static void
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
nosig(const char *name)
1993-03-21 12:45:37 +03:00
{
1994-09-22 13:24:46 +04:00
warnx("unknown signal %s; valid signals:", name);
printsignals(stderr, 0);
1993-03-21 12:45:37 +03:00
exit(1);
1998-07-28 09:31:22 +04:00
/* NOTREACHED */
1993-03-21 12:45:37 +03:00
}
/*
* Print the names of all the signals (neatly) to fp
* "len" gives the number of chars already printed to
* the current output line (in kill.c, always 0)
*/
void
printsignals(FILE *fp, int len)
1993-03-21 12:45:37 +03:00
{
int sig;
int nl, pad;
const char *name;
int termwidth = 80;
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
if ((name = getenv("COLUMNS")) != 0)
termwidth = atoi(name);
else if (isatty(fileno(fp))) {
struct winsize win;
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
if (ioctl(fileno(fp), TIOCGWINSZ, &win) == 0 && win.ws_col > 0)
termwidth = win.ws_col;
}
1993-08-07 01:25:21 +04:00
pad = (len | 7) + 1 - len;
for (sig = 0; (sig = signalnext(sig)) != 0; ) {
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
name = signalname(sig);
if (name == NULL)
continue;
nl = strlen(name);
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
if (len > 0 && nl + len + pad >= termwidth) {
fprintf(fp, "\n");
len = 0;
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
pad = 0;
} else if (pad > 0 && len != 0)
fprintf(fp, "%*s", pad, "");
else
pad = 0;
len += nl + pad;
pad = (nl | 7) + 1 - nl;
fprintf(fp, "%s", name);
1994-09-22 13:24:46 +04:00
}
if (len != 0)
fprintf(fp, "\n");
1993-03-21 12:45:37 +03:00
}
static void
usage(void)
1993-03-21 12:45:37 +03:00
{
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
const char *pn = getprogname();
1994-09-22 13:24:46 +04:00
fprintf(stderr, "usage: %s [-s signal_name] pid ...\n"
Make arg parsing in kill POSIX compatible with POSIX (XBD 2.12) by parsing the way getopt(3) would, if only it could handle the (required) -signumber and -signame options. This adds two "features" to kill, -ssigname and -lstatus now work (ie: one word with all of the '-', the option letter, and its value) and "--" also now works (kill -- -pid1 pid2 will not attempt to send the pid1 signal to pid2, but rather SIGTERM to the pid1 process group and pid2). It is still the case that (apart from --) at most 1 option is permitted (-l, -s, -signame, or -signumber.) Note that we now have an ambiguity, -sname might mean "-s name" or send the signal "sname" - if one of those turns out to be valid, that will be accepted, otherwise the error message will indicate that "sname" is not a valid signal name, not that "name" is not. Keeping the "-s" and signal name as separate words avoids this issue. Also caution: should someone be weird enough to define a new signal name (as in the part after SIG) which is almost the same name as an existing name that starts with 'S' by adding an extra 'S' prepended (eg: adding a SIGSSYS) then the ambiguity problem becomes much worse. In that case "kill -ssys" will be resolved in favour of the "-s" flag being used (the more modern syntax) and would send a SIGSYS, rather that a SIGSSYS. So don't do that. While here, switch to using signalname(3) (bye bye NSIG, et. al.), add some constipation, and show a little pride in formatting the signal names for "kill -l" (and in the usage when appropriate -- same routine.) Respect COLUMNS (POSIX XBD 8.3) as primary specification of the width (terminal width, not number of columns to print) for kill -l, a very small value for COLUMNS will cause kill -l output to list signals one per line, a very large value will cause them all to be listed on one line.) (eg: "COLUMNS=1 kill -l") TODO: the signal printing for "trap -l" and that for "kill -l" should be switched to use a common routine (for the sh builtin versions.) All changes of relevance here are to bin/kill - the (minor) changes to bin/sh are only to properly expose the builtin version of getenv(3) so the builtin version of kill can use it (ie: make its prototype available.)
2017-06-27 01:09:16 +03:00
" %s -l [exit_status]\n"
" %s -signal_name pid ...\n"
" %s -signal_number pid ...\n",
pn, pn, pn, pn);
1993-03-21 12:45:37 +03:00
exit(1);
1998-07-28 09:31:22 +04:00
/* NOTREACHED */
1993-03-21 12:45:37 +03:00
}