NetBSD/gnu/usr.bin/tar/Makefile.gnu

192 lines
6.6 KiB
Makefile
Raw Normal View History

# Generated automatically from Makefile.in by configure.
# Un*x Makefile for GNU tar program.
# Copyright (C) 1991, 1992, 1993 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# $Id: Makefile.gnu,v 1.3 1998/06/07 02:30:12 enami Exp $
#### Start of system configuration section. ####
srcdir = .
VPATH = .
# If you use gcc, you should either run the fixincludes script that
# comes with it or else use gcc with the -traditional option. Otherwise
# ioctl calls will be compiled incorrectly on some systems.
CC = gcc
YACC = bison -y
INSTALL = /usr/local/bin/install -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL) -m 644
# Things you might add to DEFS:
# -DSTDC_HEADERS If you have ANSI C headers and libraries.
# -DHAVE_UNISTD_H If you have unistd.h.
# -DHAVE_STRING_H If you don't have ANSI C headers but have string.h.
# -DHAVE_LIMITS_H If you have limits.h.
# -DBSD42 If you have sys/dir.h (unless you use -DPOSIX),
# sys/file.h, and st_blocks in `struct stat'.
# Also, efficient sparse file handling is enabled
# as if -DENABLE_SPARSE is specified.
# -DDIRENT If you have dirent.h.
# -DSYSNDIR Old Xenix systems (sys/ndir.h).
# -DSYSDIR Old BSD systems (sys/dir.h).
# -DNDIR Old System V systems (ndir.h).
# -DMAJOR_IN_MKDEV If major, minor, makedev defined in sys/mkdev.h.
# -DMAJOR_IN_SYSMACROS If major, minor, makedev defined in sys/sysmacros.h.
# -DRETSIGTYPE=int If your signal handlers return int, not void.
# -DHAVE_SYS_MTIO_H If you have sys/mtio.h (magtape ioctls).
# -DHAVE_SYS_GENTAPE_H If you have sys/gentape.h (ISC magtape ioctls).
# -DHAVE_NETDB_H To use rexec for remote tape operations
# instead of forking rsh or remsh.
# -DNO_REMOTE If you have neither a remote shell nor rexec.
# -DHAVE_VPRINTF If you have vprintf function.
# -DHAVE_DOPRNT If you have _doprnt function (but lack vprintf).
# -DHAVE_FTIME If you have ftime system call.
# -DHAVE_STRSTR If you have strstr function.
# -DHAVE_VALLOC If you have valloc function.
# -DHAVE_MKDIR If you have mkdir and rmdir system calls.
# -DHAVE_MKNOD If you have mknod system call.
# -DHAVE_RENAME If you have rename system call.
# -DHAVE_GETCWD If not POSIX.1 but have getcwd function.
# -DHAVE_FTRUNCATE If you have ftruncate system call.
# -DV7 On Version 7 Unix (not tested in a long time).
# -DEMUL_OPEN3 If you lack a 3-argument version of open, and want
# to emulate it with system calls you do have.
# -DNO_OPEN3 If you lack the 3-argument open and want to
# disable the tar -k option instead of emulating open.
# -DXENIX If you have sys/inode.h and need it to be included.
# -DENABLE_SPARSE If you want to enable an efficient sparse file
# handling (-S option).
DEF_AR_FILE = /dev/rst0
DEFBLOCKING = 20
DEFS = -DRETSIGTYPE=void -DDIRENT=1 -DHAVE_SYS_MTIO_H=1 -DHAVE_UNISTD_H=1 -DHAVE_GETGRGID=1 -DHAVE_GETPWUID=1 -DHAVE_STRING_H=1 -DHAVE_LIMITS_H=1 -DHAVE_STRSTR=1 -DHAVE_VALLOC=1 -DHAVE_MKDIR=1 -DHAVE_MKNOD=1 -DHAVE_RENAME=1 -DHAVE_FTRUNCATE=1 -DHAVE_GETCWD=1 -DHAVE_VPRINTF=1 -DDEF_AR_FILE=\"$(DEF_AR_FILE)\" -DDEFBLOCKING=$(DEFBLOCKING)
# Set this to rtapelib.o unless you defined NO_REMOTE, in which case
# make it empty.
RTAPELIB = rtapelib.o
LIBS =
CFLAGS = -g
LDFLAGS = -g
prefix = /usr/bin
exec_prefix = $(prefix)
# Prefix for each installed program, normally empty or `g'.
binprefix =
# The directory to install tar in.
bindir = $(exec_prefix)/bin
# Where to put the rmt executable.
libdir = /sbin
# The directory to install the info files in.
infodir = $(prefix)/info
#### End of system configuration section. ####
SHELL = /bin/sh
SRC1 = tar.c create.c extract.c buffer.c getoldopt.c update.c gnu.c mangle.c
SRC2 = version.c list.c names.c diffarch.c port.c fnmatch.c getopt.c malloc.c
SRC3 = getopt1.c regex.c getdate.y getdate.c alloca.c
SRCS = $(SRC1) $(SRC2) $(SRC3)
OBJ1 = tar.o create.o extract.o buffer.o getoldopt.o update.o gnu.o mangle.o
OBJ2 = version.o list.o names.o diffarch.o port.o fnmatch.o getopt.o
OBJ3 = getopt1.o regex.o getdate.o $(RTAPELIB)
OBJS = $(OBJ1) $(OBJ2) $(OBJ3)
AUX = README INSTALL NEWS COPYING ChangeLog Makefile.in makefile.pc \
configure configure.in \
tar.h fnmatch.h pathmax.h port.h open3.h getopt.h regex.h \
rmt.h rmt.c rtapelib.c \
msd_dir.h msd_dir.c tcexparg.c \
level-0 level-1 backup-specs dump-remind getpagesize.h
# tar.texinfo tar.info* texinfo.tex \
all: tar rmt
# tar.info
.c.o:
$(CC) -c $(CFLAGS) $(CPPFLAGS) $(DEFS) -I$(srcdir) -I. $<
tar: $(OBJS)
$(CC) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
rmt: rmt.c
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(srcdir)/rmt.c $(LIBS)
tar.info: tar.texinfo
makeinfo $(srcdir)/tar.texinfo
install: all
$(INSTALL_PROGRAM) tar $(bindir)/$(binprefix)tar
-test ! -f rmt || $(INSTALL_PROGRAM) rmt $(libdir)/rmt
# for file in $(srcdir)/tar.info*; \
# do $(INSTALL_DATA) $$file $(infodir)/$$file; \
# done
uninstall:
rm -f $(bindir)/$(binprefix)tar $(infodir)/tar.info*
-rm -f $(libdir)/rmt
$(OBJS): tar.h pathmax.h port.h
regex.o buffer.o tar.o: regex.h
tar.o fnmatch.o: fnmatch.h
getdate.c: getdate.y
$(YACC) $(srcdir)/getdate.y
mv y.tab.c getdate.c
# getdate.y has 8 shift/reduce conflicts.
TAGS: $(SRCS)
etags $(SRCS)
clean:
rm -f *.o tar rmt core
mostlyclean: clean
distclean: clean
rm -f Makefile config.status
realclean: distclean
rm -f TAGS *.info* getdate.c y.tab.c
shar: $(SRCS) $(AUX)
shar $(SRCS) $(AUX) | gzip > tar-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c`.shar.z
dist: $(SRCS) $(AUX)
echo tar-`sed -e '/version_string/!d' -e 's/[^0-9.]*\([0-9.]*\).*/\1/' -e q version.c` > .fname
-rm -rf `cat .fname`
mkdir `cat .fname`
for file in $(SRCS) $(AUX); do \
ln $$file `cat .fname` || cp $$file `cat .fname`; done
tar chzf `cat .fname`.tar.z `cat .fname`
-rm -rf `cat .fname` .fname
tar.zoo: $(SRCS) $(AUX)
-rm -rf tmp.dir
-mkdir tmp.dir
-rm tar.zoo
for X in $(SRCS) $(AUX) ; do echo $$X ; sed 's/$$/ /' $$X > tmp.dir/$$X ; done
cd tmp.dir ; zoo aM ../tar.zoo *
-rm -rf tmp.dir
# Prevent GNU make v3 from overflowing arg limit on SysV.
.NOEXPORT: