Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
35df36296b
NetBSD/sys/dev/scsipi/scsi_message.h

87 lines
3.0 KiB
C
Raw Normal View History

Remove duplicate define that crept in.
2002-12-07 02:04:16 +03:00
/* $NetBSD: scsi_message.h,v 1.10 2002/12/06 23:04:16 fvdl Exp $ */
RCSID Police.
1998-01-05 10:31:05 +03:00
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
/* Messages (1 byte) */ /* I/T (M)andatory or (O)ptional */
#define MSG_CMDCOMPLETE 0x00 /* M/M */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_TASK_COMPLETE 0x00 /* M/M */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_EXTENDED 0x01 /* O/O */
#define MSG_SAVEDATAPOINTER 0x02 /* O/O */
#define MSG_RESTOREPOINTERS 0x03 /* O/O */
#define MSG_DISCONNECT 0x04 /* O/O */
#define MSG_INITIATOR_DET_ERR 0x05 /* M/M */
#define MSG_ABORT 0x06 /* O/M */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_ABORT_TASK_SET 0x06 /* O/M */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_MESSAGE_REJECT 0x07 /* M/M */
#define MSG_NOOP 0x08 /* M/M */
#define MSG_PARITY_ERROR 0x09 /* M/M */
#define MSG_LINK_CMD_COMPLETE 0x0a /* O/O */
#define MSG_LINK_CMD_COMPLETEF 0x0b /* O/O */
#define MSG_BUS_DEV_RESET 0x0c /* O/M */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_TARGET_RESET 0x0c /* O/M */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_ABORT_TAG 0x0d /* O/O */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_ABORT_TASK 0x0d /* O/O */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_CLEAR_QUEUE 0x0e /* O/O */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_CLEAR_TASK_SET 0x0e /* O/O */ /* SPI3 Terminology */
#define MSG_INIT_RECOVERY 0x0f /* O/O */ /* Deprecated in SPI3 */
#define MSG_REL_RECOVERY 0x10 /* O/O */ /* Deprecated in SPI3 */
#define MSG_TERM_IO_PROC 0x11 /* O/O */ /* Deprecated in SPI3 */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
/* Messages (2 byte) */
#define MSG_SIMPLE_Q_TAG 0x20 /* O/O */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_SIMPLE_TASK 0x20 /* O/O */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_HEAD_OF_Q_TAG 0x21 /* O/O */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_HEAD_OF_QUEUE_TASK 0x21 /* O/O */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_ORDERED_Q_TAG 0x22 /* O/O */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_ORDERED_TASK 0x22 /* O/O */ /* SPI3 Terminology */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_IGN_WIDE_RESIDUE 0x23 /* O/O */
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_ACA_TASK 0x24 /* 0/0 */ /* SPI3 */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
dev/microcode/aic7xxx/aic7xxx.seq, dev/microcode/aic7xxx_seq.h, dev/ic/aic7xxxreg.h: Remove intrinsic knowledge about SDTR and WDTR messages and replace it with a generic message system that allows the kernel driver to handle SDTR, WDTR and any other type of extended message it chooses too. This makes the sequencer code much simpler, makes extended message handling debuggable since the bulk of the work is in the kernel driver, and saves lots of instruction space. Regen microcode header file. dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h: Add code to handle WDTR and SDTR negotiation in light of the changes in the message interface to the sequencer. Don't reject targets that negotiate async by sending an SDTR with a 0 offset. Use an sdtr message with 0,0 to negotiate async when a target suggests a period that is too long for us to handle. Some tape and cdrom drives don't like us doing the message reject that we did in the past. Fix a problem with handing the QUEUE FULL condition. Fix a race condition (most likely the cause of the SCB paging problems) that might allow the sequencer to get unpaused before the condition that caused it to be paused (a SEQINT) was handled. Race condition pointed out by Doug Ledford <dledford@dialnet.net> and by "Dan Willis" <dan@plutotech.com>. dev/pci/ahc_pci.c: Add support for the 2940AU, an aic7860 based controller. dev/pci/pcidevs.h, dev/pci/pcidevs_data.h: Add product IDs for the 2940AU, aic7860 and aic7855. Regen data file. scsi/scsi_message.h: Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these extended messages. Thanks to Chuck Cranor <chuck@maria.wustl.edu> for testing these changes out for me.
1996-10-08 07:04:02 +04:00
/* Identify message */ /* M/M */
#define MSG_IDENTIFYFLAG 0x80
Add a couple of defines/aliases for messages.
2000-03-15 05:02:37 +03:00
#define MSG_IDENTIFY_DISCFLAG 0x40
Replace a magic number with macro.
2001-11-03 18:52:03 +03:00
#define MSG_IDENTIFY(lun, disc) \
(MSG_IDENTIFYFLAG | ((disc) ? MSG_IDENTIFY_DISCFLAG : 0) | (lun))
dev/microcode/aic7xxx/aic7xxx.seq, dev/microcode/aic7xxx_seq.h, dev/ic/aic7xxxreg.h: Remove intrinsic knowledge about SDTR and WDTR messages and replace it with a generic message system that allows the kernel driver to handle SDTR, WDTR and any other type of extended message it chooses too. This makes the sequencer code much simpler, makes extended message handling debuggable since the bulk of the work is in the kernel driver, and saves lots of instruction space. Regen microcode header file. dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h: Add code to handle WDTR and SDTR negotiation in light of the changes in the message interface to the sequencer. Don't reject targets that negotiate async by sending an SDTR with a 0 offset. Use an sdtr message with 0,0 to negotiate async when a target suggests a period that is too long for us to handle. Some tape and cdrom drives don't like us doing the message reject that we did in the past. Fix a problem with handing the QUEUE FULL condition. Fix a race condition (most likely the cause of the SCB paging problems) that might allow the sequencer to get unpaused before the condition that caused it to be paused (a SEQINT) was handled. Race condition pointed out by Doug Ledford <dledford@dialnet.net> and by "Dan Willis" <dan@plutotech.com>. dev/pci/ahc_pci.c: Add support for the 2940AU, an aic7860 based controller. dev/pci/pcidevs.h, dev/pci/pcidevs_data.h: Add product IDs for the 2940AU, aic7860 and aic7855. Regen data file. scsi/scsi_message.h: Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these extended messages. Thanks to Chuck Cranor <chuck@maria.wustl.edu> for testing these changes out for me.
1996-10-08 07:04:02 +04:00
#define MSG_ISIDENTIFY(m) ((m) & MSG_IDENTIFYFLAG)
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_IDENTIFY_LUNMASK 0x3f
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
dev/microcode/aic7xxx/aic7xxx.seq, dev/microcode/aic7xxx_seq.h, dev/ic/aic7xxxreg.h: Remove intrinsic knowledge about SDTR and WDTR messages and replace it with a generic message system that allows the kernel driver to handle SDTR, WDTR and any other type of extended message it chooses too. This makes the sequencer code much simpler, makes extended message handling debuggable since the bulk of the work is in the kernel driver, and saves lots of instruction space. Regen microcode header file. dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h: Add code to handle WDTR and SDTR negotiation in light of the changes in the message interface to the sequencer. Don't reject targets that negotiate async by sending an SDTR with a 0 offset. Use an sdtr message with 0,0 to negotiate async when a target suggests a period that is too long for us to handle. Some tape and cdrom drives don't like us doing the message reject that we did in the past. Fix a problem with handing the QUEUE FULL condition. Fix a race condition (most likely the cause of the SCB paging problems) that might allow the sequencer to get unpaused before the condition that caused it to be paused (a SEQINT) was handled. Race condition pointed out by Doug Ledford <dledford@dialnet.net> and by "Dan Willis" <dan@plutotech.com>. dev/pci/ahc_pci.c: Add support for the 2940AU, an aic7860 based controller. dev/pci/pcidevs.h, dev/pci/pcidevs_data.h: Add product IDs for the 2940AU, aic7860 and aic7855. Regen data file. scsi/scsi_message.h: Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these extended messages. Thanks to Chuck Cranor <chuck@maria.wustl.edu> for testing these changes out for me.
1996-10-08 07:04:02 +04:00
/* Extended messages (opcode and length) */
Numerous changes. Many bugs fixed, better autoconfig, a few new features.
1994-12-28 22:42:47 +03:00
#define MSG_EXT_SDTR 0x01
dev/microcode/aic7xxx/aic7xxx.seq, dev/microcode/aic7xxx_seq.h, dev/ic/aic7xxxreg.h: Remove intrinsic knowledge about SDTR and WDTR messages and replace it with a generic message system that allows the kernel driver to handle SDTR, WDTR and any other type of extended message it chooses too. This makes the sequencer code much simpler, makes extended message handling debuggable since the bulk of the work is in the kernel driver, and saves lots of instruction space. Regen microcode header file. dev/ic/aic7xxx.c, dev/ic/aic7xxxvar.h: Add code to handle WDTR and SDTR negotiation in light of the changes in the message interface to the sequencer. Don't reject targets that negotiate async by sending an SDTR with a 0 offset. Use an sdtr message with 0,0 to negotiate async when a target suggests a period that is too long for us to handle. Some tape and cdrom drives don't like us doing the message reject that we did in the past. Fix a problem with handing the QUEUE FULL condition. Fix a race condition (most likely the cause of the SCB paging problems) that might allow the sequencer to get unpaused before the condition that caused it to be paused (a SEQINT) was handled. Race condition pointed out by Doug Ledford <dledford@dialnet.net> and by "Dan Willis" <dan@plutotech.com>. dev/pci/ahc_pci.c: Add support for the 2940AU, an aic7860 based controller. dev/pci/pcidevs.h, dev/pci/pcidevs_data.h: Add product IDs for the 2940AU, aic7860 and aic7855. Regen data file. scsi/scsi_message.h: Add MSG_EXT_SDTR_LEN and MSG_EXT_WDTR_LEN - the length of bytes in these extended messages. Thanks to Chuck Cranor <chuck@maria.wustl.edu> for testing these changes out for me.
1996-10-08 07:04:02 +04:00
#define MSG_EXT_SDTR_LEN 0x03
#define MSG_EXT_WDTR 0x03
#define MSG_EXT_WDTR_LEN 0x02
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
#define MSG_EXT_WDTR_BUS_8_BIT 0x00
#define MSG_EXT_WDTR_BUS_16_BIT 0x01
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_EXT_WDTR_BUS_32_BIT 0x02 /* Deprecated in SPI3 */
Pull up the thorpej_scsipi branch to main branch. This is a completely rewritten scsipi_xfer execution engine, and the associated changes to HBA drivers. Overview of changes & features: - All xfers are queued in the mid-layer, rather than doing so in an ad-hoc fashion in individual adapter drivers. - Adapter/channel resource management in the mid-layer, avoids even trying to start running an xfer if the adapter/channel doesn't have the resources. - Better communication between the mid-layer and the adapters. - Asynchronous event notification mechanism from adapter to mid-layer and peripherals. - Better peripheral queue management: freeze/thaw, sorted requeueing during recovery, etc. - Clean separation of peripherals, adapters, and adapter channels (no more scsipi_link). - Kernel thread for each scsipi_channel makes error recovery much easier (no more dealing with interrupt context when recovering from an error). - Mid-layer support for tagged queueing: commands can have the tag type set explicitly, tag IDs are allocated in the mid-layer (thus eliminating the need to use buggy tag ID allocation schemes in many adapter drivers). - support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command will be requeued, or a REQUEST SENSE will be sent as appropriate. Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
2001-04-25 21:53:04 +04:00
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
#define MSG_EXT_PPR 0x04 /* SPI3 */
Add the Parallel Protocol Request message.
2002-04-23 13:46:51 +04:00
#define MSG_EXT_PPR_LEN 0x06
/*
* Offsets: 0x3: transfer period factor
* 0x4: reserved
* 0x5: REQ/ACK offset
* 0x6: transfer width exponent
* 0x7: flags
*/
#define MSG_EXT_PPR_IU 0x01
#define MSG_EXT_PPR_DT 0x02
#define MSG_EXT_PPR_QAS 0x04
#define MSG_EXT_PPR_HOLDMCS 0x08
#define MSG_EXT_PPR_WRFLOW 0x10
#define MSG_EXT_PPR_RDSTRM 0x20
#define MSG_EXT_PPR_RTI 0x40
#define MSG_EXT_PPR_PCOM 0x80
Sync this with the FreeBSD version, adding a few aliases and new definitions.
2002-12-07 01:46:34 +03:00
/*
* FreeBSD compat for above.
*/
#define MSG_EXT_PPR_QAS_REQ MSG_EXT_PPR_QAS
#define MSG_EXT_PPR_DT_REQ MSG_EXT_PPR_DT
#define MSG_EXT_PPR_IU_REQ MSG_EXT_PPR_IU
Add common macro to check message length.
2001-11-04 15:03:03 +03:00
#define MSG_ISEXTENDED(m) ((m) == MSG_EXTENDED)
/* message length */
#define MSG_IS1BYTE(m) \
((!MSG_ISEXTENDED(m) && (m) < 0x20) || MSG_ISIDENTIFY(m))
#define MSG_IS2BYTE(m) (((m) & 0xf0) == 0x20)
Reference in New Issue Copy Permalink