Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/ufs/lfs/lfs_extern.h

237 lines
9.0 KiB
C
Raw Normal View History

Include the space taken by inodes in the count made by lfs_check(); make VOP_SETATTR call lfs_check. This prevents large numbers of inode changes (say, at the end of tar(1)) from filling the buffer cache.
2002-02-11 05:47:29 +03:00
/* $NetBSD: lfs_extern.h,v 1.28 2002/02/11 02:47:29 perseant Exp $ */
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 10:39:25 +04:00
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
/*-
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
* Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Konrad E. Schroder <perseant@hhhh.org>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/*-
* Copyright (c) 1991, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Merge with Lite2 + local changes
1998-03-01 05:20:01 +03:00
* @(#)lfs_extern.h 8.6 (Berkeley) 5/8/95
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
*/
Clean up accounting of lfs_uinodes (dirty but unwritten inodes). Make lfs_uinodes a signed quantity for debugging purposes, and set it to zero as fs mount time. Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED, IN_CLEANING) in macros, and use those macros everywhere. Make LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
2000-07-06 02:25:43 +04:00
/* Copied from ext2fs for ITIMES. XXX This is a bogus use of v_tag. */
#define IS_LFS_VNODE(vp) (vp->v_tag == VT_LFS)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
/*
* Sysctl values for LFS.
*/
#define LFS_WRITEINDIR 1 /* flush indirect blocks on non-checkpoint writes */
#define LFS_CLEAN_VNHEAD 2 /* put prev unrefed cleaned vnodes on head of free list */
#define LFS_DOSTATS 3
#define LFS_STATS 4
#define LFS_MAXID 5
#define LFS_NAMES { \
{ 0, 0 }, \
{ "flushindir", CTLTYPE_INT }, \
{ "clean_vnhead", CTLTYPE_INT }, \
{ "dostats", CTLTYPE_INT }, \
{ "stats", CTLTYPE_STRUCT }, \
}
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
struct fid;
struct mount;
struct nameidata;
struct proc;
struct statfs;
struct timeval;
struct inode;
struct uio;
struct mbuf;
lfs prototypes
1996-02-10 01:28:45 +03:00
struct dinode;
struct buf;
struct vnode;
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
struct dlfs;
lfs prototypes
1996-02-10 01:28:45 +03:00
struct lfs;
struct segment;
Add fwd declaration for struct ucred
1996-02-12 18:20:12 +03:00
struct ucred;
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
Use the pool allocator and the "nointr" pool page allocator for LFS inodes.
1998-09-01 07:26:05 +04:00
extern struct pool lfs_inode_pool; /* memory pool for inodes */
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
__BEGIN_DECLS
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_alloc.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
int lfs_rf_valloc(struct lfs *, ino_t, int, struct proc *, struct vnode **);
void lfs_vcreate(struct mount *, ino_t, struct vnode *);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_bio.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
int lfs_availwait(struct lfs *, int);
int lfs_bwrite_ext(struct buf *, int);
int lfs_fits(struct lfs *, int);
void lfs_flush_fs(struct lfs *, int);
void lfs_flush(struct lfs *, int);
int lfs_check(struct vnode *, ufs_daddr_t, int);
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#ifdef MALLOCLOG
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_freebuf_malloclog(struct buf *, char *, int);
struct buf *lfs_newbuf_malloclog(struct lfs *, struct vnode *,
ufs_daddr_t, size_t, char *, int);
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#define lfs_freebuf(BP) lfs_freebuf_malloclog((BP), __FILE__, __LINE__)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#define lfs_newbuf(F, V, A, S) lfs_newbuf_malloclog((F),(V),(A),(S),__FILE__,__LINE__)
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#else
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_freebuf(struct buf *);
struct buf *lfs_newbuf(struct lfs *, struct vnode *, ufs_daddr_t, size_t);
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#endif
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_countlocked(int *, long *);
int lfs_reserve(struct lfs *, struct vnode *, int);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_cksum.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
u_int32_t cksum(void *, size_t);
u_int32_t lfs_sb_cksum(struct dlfs *);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_debug.c */
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
#ifdef DEBUG
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_dump_super(struct lfs *);
void lfs_dump_dinode(struct dinode *);
void lfs_check_bpp(struct lfs *, struct segment *, char *, int);
void lfs_check_segsum(struct lfs *, struct segment *, char *, int);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
#endif /* DEBUG */
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_inode.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
struct dinode *lfs_ifind(struct lfs *, ino_t, struct buf *);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_segment.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_imtime(struct lfs *);
int lfs_vflush(struct vnode *);
int lfs_writevnodes(struct lfs *, struct mount *, struct segment *, int);
int lfs_segwrite(struct mount *, int);
void lfs_writefile(struct lfs *, struct segment *, struct vnode *);
int lfs_writeinode(struct lfs *, struct segment *, struct inode *);
int lfs_gatherblock(struct segment *, struct buf *, int *);
int lfs_gather(struct lfs *, struct segment *, struct vnode *, int (*match )(struct lfs *, struct buf *));
void lfs_updatemeta(struct segment *);
int lfs_initseg(struct lfs *);
void lfs_newseg(struct lfs *);
int lfs_writeseg(struct lfs *, struct segment *);
void lfs_writesuper(struct lfs *, daddr_t);
int lfs_match_data(struct lfs *, struct buf *);
int lfs_match_indir(struct lfs *, struct buf *);
int lfs_match_dindir(struct lfs *, struct buf *);
int lfs_match_tindir(struct lfs *, struct buf *);
void lfs_callback(struct buf *);
void lfs_supercallback(struct buf *);
void lfs_shellsort(struct buf **, ufs_daddr_t *, int);
int lfs_vref(struct vnode *);
void lfs_vunref(struct vnode *);
void lfs_vunref_head(struct vnode *);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_subr.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_seglock(struct lfs *, unsigned long);
void lfs_segunlock(struct lfs *);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_syscalls.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
int lfs_fastvget(struct mount *, ino_t, ufs_daddr_t, struct vnode **, struct dinode *, int *);
struct buf *lfs_fakebuf(struct vnode *, int, size_t, caddr_t);
lfs prototypes
1996-02-10 01:28:45 +03:00
/* lfs_vfsops.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_init(void);
add a new VFS op, vfs_reinit, which is called when desiredvnodes is adjusted via sysctl. file systems that have hash tables which are sized based on the value of this variable now resize those hash tables using the new value. the max number of FFS softdeps is also recalculated. convert various file systems to use the <sys/queue.h> macros for their hash tables.
2001-09-15 20:12:54 +04:00
void lfs_reinit(void);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_done(void);
int lfs_mountroot(void);
int lfs_mount(struct mount *, const char *, void *, struct nameidata *, struct proc *);
int lfs_mountfs(struct vnode *, struct mount *, struct proc *);
int lfs_unmount(struct mount *, int, struct proc *);
int lfs_statfs(struct mount *, struct statfs *, struct proc *);
int lfs_sync(struct mount *, int, struct ucred *, struct proc *);
int lfs_vget(struct mount *, ino_t, struct vnode **);
int lfs_fhtovp(struct mount *, struct fid *, struct vnode **);
int lfs_vptofh(struct vnode *, struct fid *);
int lfs_sysctl(int *, u_int, void *, size_t *, void *, size_t, struct proc *);
lfs prototypes
1996-02-10 01:28:45 +03:00
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
/* lfs_vnops.c */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
void lfs_unmark_vnode(struct vnode *);
void lfs_itimes(struct inode *, struct timespec *, struct timespec *,
struct timespec *);
int lfs_balloc (void *);
int lfs_valloc (void *);
int lfs_vfree (void *);
int lfs_bwrite (void *);
int lfs_update (void *);
int lfs_truncate(void *);
int lfs_blkatoff(void *);
int lfs_fsync (void *);
int lfs_symlink (void *);
int lfs_mknod (void *);
int lfs_create (void *);
int lfs_mkdir (void *);
int lfs_read (void *);
int lfs_remove (void *);
int lfs_rmdir (void *);
int lfs_link (void *);
int lfs_rename (void *);
int lfs_getattr (void *);
Include the space taken by inodes in the count made by lfs_check(); make VOP_SETATTR call lfs_check. This prevents large numbers of inode changes (say, at the end of tar(1)) from filling the buffer cache.
2002-02-11 05:47:29 +03:00
int lfs_setattr (void *);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
int lfs_close (void *);
int lfs_inactive(void *);
int lfs_reclaim (void *);
int lfs_write (void *);
int lfs_whiteout(void *);
use the new compatibility routines to allow mmap() to work (in the same non-coherent fashion that it worked pre-UBC) until someone has time to do it the right way.
2001-12-18 10:51:16 +03:00
int lfs_getpages(void *);
int lfs_putpages(void *);
lfs prototypes
1996-02-10 01:28:45 +03:00
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
__END_DECLS
Merge with Lite2 + local changes
1998-03-01 05:20:01 +03:00
extern int lfs_mount_type;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
extern int (**lfs_vnodeop_p)(void *);
extern int (**lfs_specop_p)(void *);
extern int (**lfs_fifoop_p)(void *);
use the new compatibility routines to allow mmap() to work (in the same non-coherent fashion that it worked pre-UBC) until someone has time to do it the right way.
2001-12-18 10:51:16 +03:00
extern struct genfs_ops lfs_genfsops;