NetBSD/sys/dev/ic/an.c

1715 lines
42 KiB
C
Raw Normal View History

/* $NetBSD: an.c,v 1.11 2001/03/08 16:33:43 thorpej Exp $ */
/*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: src/sys/dev/an/if_an.c,v 1.12 2000/11/13 23:04:12 wpaul Exp $
*/
/*
* Aironet 4500/4800 802.11 PCMCIA/ISA/PCI driver for FreeBSD.
*
* Written by Bill Paul <wpaul@ctr.columbia.edu>
* Electrical Engineering Department
* Columbia University, New York City
*/
/*
* The Aironet 4500/4800 series cards some in PCMCIA, ISA and PCI form.
* This driver supports all three device types (PCI devices are supported
* through an extra PCI shim: /sys/pci/if_an_p.c). ISA devices can be
* supported either using hard-coded IO port/IRQ settings or via Plug
* and Play. The 4500 series devices support 1Mbps and 2Mbps data rates.
* The 4800 devices support 1, 2, 5.5 and 11Mbps rates.
*
* Like the WaveLAN/IEEE cards, the Aironet NICs are all essentially
* PCMCIA devices. The ISA and PCI cards are a combination of a PCMCIA
* device and a PCMCIA to ISA or PCMCIA to PCI adapter card. There are
* a couple of important differences though:
*
* - Lucent doesn't currently offer a PCI card, however Aironet does
* - Lucent ISA card looks to the host like a PCMCIA controller with
* a PCMCIA WaveLAN card inserted. This means that even desktop
* machines need to be configured with PCMCIA support in order to
* use WaveLAN/IEEE ISA cards. The Aironet cards on the other hand
* actually look like normal ISA and PCI devices to the host, so
* no PCMCIA controller support is needed
*
* The latter point results in a small gotcha. The Aironet PCMCIA
* cards can be configured for one of two operating modes depending
* on how the Vpp1 and Vpp2 programming voltages are set when the
* card is activated. In order to put the card in proper PCMCIA
* operation (where the CIS table is visible and the interface is
* programmed for PCMCIA operation), both Vpp1 and Vpp2 have to be
* set to 5 volts. FreeBSD by default doesn't set the Vpp voltages,
* which leaves the card in ISA/PCI mode, which prevents it from
* being activated as an PCMCIA device. Consequently, /sys/pccard/pccard.c
* has to be patched slightly in order to enable the Vpp voltages in
* order to make the Aironet PCMCIA cards work.
*
* Note that some PCMCIA controller software packages for Windows NT
* fail to set the voltages as well.
*
* The Aironet devices can operate in both station mode and access point
* mode. Typically, when programmed for station mode, the card can be set
* to automatically perform encapsulation/decapsulation of Ethernet II
* and 802.3 frames within 802.11 frames so that the host doesn't have
* to do it itself. This driver doesn't program the card that way: the
* driver handles all of the encapsulation/decapsulation itself.
*/
/*
* Ported to NetBSD from FreeBSD by Atsushi Onoe at the San Diego
* IETF meeting.
*/
#include "opt_inet.h"
#include "bpfilter.h"
#ifdef INET
#define ANCACHE /* enable signal strength cache */
#endif
#include <sys/param.h>
#include <sys/callout.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/ucred.h>
#include <sys/socket.h>
#include <sys/device.h>
#ifdef ANCACHE
#include <sys/syslog.h>
#include <sys/sysctl.h>
#endif
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_ieee80211.h>
#include <net/if_types.h>
#include <net/if_media.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#endif
#if NBPFILTER > 0
#include <net/bpf.h>
#endif
#include <dev/ic/anreg.h>
#include <dev/ic/anvar.h>
#if !defined(lint)
static const char rcsid[] =
"$FreeBSD: src/sys/dev/an/if_an.c,v 1.12 2000/11/13 23:04:12 wpaul Exp $";
#endif
/* These are global because we need them in sys/pci/if_an_p.c. */
static void an_reset __P((struct an_softc *));
static void an_wait __P((struct an_softc *));
static int an_ioctl __P((struct ifnet *, u_long, caddr_t));
static int an_init __P((struct ifnet *));
static void an_stop __P((struct ifnet *, int));
static int an_init_tx_ring __P((struct an_softc *));
static void an_start __P((struct ifnet *));
static void an_watchdog __P((struct ifnet *));
static void an_rxeof __P((struct an_softc *));
static void an_txeof __P((struct an_softc *, int));
static void an_promisc __P((struct an_softc *, int));
static int an_cmd __P((struct an_softc *, int, int));
static int an_read_record __P((struct an_softc *, struct an_ltv_gen *));
static int an_write_record __P((struct an_softc *, struct an_ltv_gen *));
static int an_read_data __P((struct an_softc *, int,
int, caddr_t, int));
static int an_write_data __P((struct an_softc *, int,
int, caddr_t, int));
static int an_seek __P((struct an_softc *, int, int, int));
static int an_alloc_nicmem __P((struct an_softc *, int, int *));
static void an_stats_update __P((void *));
static void an_setdef __P((struct an_softc *, struct an_req *));
#ifdef ANCACHE
static void an_cache_store __P((struct an_softc *, struct ether_header *,
struct mbuf *, unsigned short));
#endif
#ifdef IFM_IEEE80211
static int an_media_change __P((struct ifnet *ifp));
static void an_media_status __P((struct ifnet *ifp, struct ifmediareq *imr));
#endif
int
an_attach(struct an_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ec_if;
int i, s;
#ifdef IFM_IEEE80211
int mtype;
struct ifmediareq imr;
#endif
s = splnet();
sc->an_associated = 0;
an_wait(sc);
/* Load factory config */
if (an_cmd(sc, AN_CMD_READCFG, 0)) {
splx(s);
printf("%s: failed to load config data\n", sc->an_dev.dv_xname);
return(EIO);
}
/* Read the current configuration */
sc->an_config.an_type = AN_RID_GENCONFIG;
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_config)) {
splx(s);
printf("%s: read record failed\n", sc->an_dev.dv_xname);
return(EIO);
}
/* Read the card capabilities */
sc->an_caps.an_type = AN_RID_CAPABILITIES;
sc->an_caps.an_len = sizeof(struct an_ltv_caps);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_caps)) {
splx(s);
printf("%s: read record failed\n", sc->an_dev.dv_xname);
return(EIO);
}
/* Read ssid list */
sc->an_ssidlist.an_type = AN_RID_SSIDLIST;
sc->an_ssidlist.an_len = sizeof(struct an_ltv_ssidlist);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_ssidlist)) {
splx(s);
printf("%s: read record failed\n", sc->an_dev.dv_xname);
return(EIO);
}
/* Read AP list */
sc->an_aplist.an_type = AN_RID_APLIST;
sc->an_aplist.an_len = sizeof(struct an_ltv_aplist);
if (an_read_record(sc, (struct an_ltv_gen *)&sc->an_aplist)) {
splx(s);
printf("%s: read record failed\n", sc->an_dev.dv_xname);
return(EIO);
}
printf("%s: 802.11 address: %s\n", sc->an_dev.dv_xname,
ether_sprintf(sc->an_caps.an_oemaddr));
ifp->if_softc = sc;
ifp->if_flags =
IFF_BROADCAST | IFF_NOTRAILERS | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = an_ioctl;
ifp->if_start = an_start;
ifp->if_init = an_init;
ifp->if_stop = an_stop;
ifp->if_watchdog = an_watchdog;
2000-12-14 09:27:23 +03:00
IFQ_SET_READY(&ifp->if_snd);
memcpy(ifp->if_xname, sc->an_dev.dv_xname, IFNAMSIZ);
bzero(sc->an_config.an_nodename, sizeof(sc->an_config.an_nodename));
bcopy(AN_DEFAULT_NODENAME, sc->an_config.an_nodename,
sizeof(AN_DEFAULT_NODENAME) - 1);
bzero(sc->an_ssidlist.an_ssid1, sizeof(sc->an_ssidlist.an_ssid1));
bcopy(AN_DEFAULT_NETNAME, sc->an_ssidlist.an_ssid1,
sizeof(AN_DEFAULT_NETNAME) - 1);
sc->an_ssidlist.an_ssid1_len = strlen(AN_DEFAULT_NETNAME);
sc->an_config.an_opmode = AN_OPMODE_INFRASTRUCTURE_STATION;
sc->an_tx_rate = 0;
bzero((char *)&sc->an_stats, sizeof(sc->an_stats));
/*
* Call MI attach routine.
*/
if_attach(ifp);
ether_ifattach(ifp, sc->an_caps.an_oemaddr);
#ifdef IFM_IEEE80211
ifmedia_init(&sc->sc_media, 0, an_media_change, an_media_status);
ifmedia_add(&sc->sc_media, IFM_MAKEWORD(IFM_IEEE80211, IFM_AUTO,
0, 0), 0, NULL);
ifmedia_add(&sc->sc_media, IFM_MAKEWORD(IFM_IEEE80211, IFM_AUTO,
IFM_IEEE80211_ADHOC, 0), 0, NULL);
for (i = 0; i < sizeof(sc->an_caps.an_rates); i++) {
switch (sc->an_caps.an_rates[i]) {
case AN_RATE_1MBPS:
mtype = IFM_IEEE80211_DS1;
break;
case AN_RATE_2MBPS:
mtype = IFM_IEEE80211_DS2;
break;
case AN_RATE_5_5MBPS:
mtype = IFM_IEEE80211_DS5;
break;
case AN_RATE_11MBPS:
mtype = IFM_IEEE80211_DS11;
break;
default:
continue;
}
ifmedia_add(&sc->sc_media, IFM_MAKEWORD(IFM_IEEE80211, mtype,
0, 0), 0, NULL);
ifmedia_add(&sc->sc_media, IFM_MAKEWORD(IFM_IEEE80211, mtype,
IFM_IEEE80211_ADHOC, 0), 0, NULL);
}
an_media_status(ifp, &imr);
ifmedia_set(&sc->sc_media, imr.ifm_active);
#endif
callout_init(&sc->an_stat_ch);
splx(s);
return(0);
}
int
an_detach(struct an_softc *sc)
{
struct ifnet *ifp = &sc->arpcom.ec_if;
int s;
s = splnet();
an_stop(ifp, 1);
ifmedia_delete_instance(&sc->sc_media, IFM_INST_ANY);
ether_ifdetach(ifp);
if_detach(ifp);
splx(s);
return 0;
}
int
an_activate(struct device *self, enum devact act)
{
struct an_softc *sc = (struct an_softc *)self;
int s, error = 0;
s = splnet();
switch (act) {
case DVACT_ACTIVATE:
error = EOPNOTSUPP;
break;
case DVACT_DEACTIVATE:
if_deactivate(&sc->arpcom.ec_if);
break;
}
splx(s);
return error;
}
void
an_power(int why, void *arg)
{
int s;
struct an_softc *sc = arg;
struct ifnet *ifp = &sc->arpcom.ec_if;
if (!sc->sc_enabled)
return;
s = splnet();
switch (why) {
case PWR_SUSPEND:
case PWR_STANDBY:
an_stop(ifp, 0);
break;
case PWR_RESUME:
break;
case PWR_SOFTSUSPEND:
case PWR_SOFTSTANDBY:
case PWR_SOFTRESUME:
break;
}
splx(s);
}
void
an_shutdown(void *arg)
{
struct an_softc *sc = arg;
an_stop(&sc->arpcom.ec_if, 1);
return;
}
static void an_rxeof(sc)
struct an_softc *sc;
{
struct ifnet *ifp;
struct ether_header *eh;
#ifdef ANCACHE
struct an_rxframe rx_frame;
#endif
struct an_rxframe_802_3 rx_frame_802_3;
struct mbuf *m;
int id, error = 0;
ifp = &sc->arpcom.ec_if;
id = CSR_READ_2(sc, AN_RX_FID);
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
ifp->if_ierrors++;
return;
}
MCLGET(m, M_DONTWAIT);
if (!(m->m_flags & M_EXT)) {
m_freem(m);
ifp->if_ierrors++;
return;
}
m->m_pkthdr.rcvif = ifp;
/* Align the data after the ethernet header */
m->m_data = (caddr_t) ALIGN(m->m_data + sizeof(struct ether_header)) -
sizeof(struct ether_header);
eh = mtod(m, struct ether_header *);
#ifdef ANCACHE
/* Read NIC frame header */
if (an_read_data(sc, id, 0, (caddr_t)&rx_frame, sizeof(rx_frame))) {
ifp->if_ierrors++;
return;
}
#endif
/* Read in the 802_3 frame header */
if (an_read_data(sc, id, 0x34, (caddr_t)&rx_frame_802_3,
sizeof(rx_frame_802_3))) {
ifp->if_ierrors++;
return;
}
if (rx_frame_802_3.an_rx_802_3_status != 0) {
ifp->if_ierrors++;
return;
}
/* Check for insane frame length */
if (rx_frame_802_3.an_rx_802_3_payload_len > MCLBYTES) {
ifp->if_ierrors++;
return;
}
m->m_pkthdr.len = m->m_len =
rx_frame_802_3.an_rx_802_3_payload_len + 12;
bcopy((char *)&rx_frame_802_3.an_rx_dst_addr,
(char *)&eh->ether_dhost, ETHER_ADDR_LEN);
bcopy((char *)&rx_frame_802_3.an_rx_src_addr,
(char *)&eh->ether_shost, ETHER_ADDR_LEN);
/* in mbuf header type is just before payload */
error = an_read_data(sc, id, 0x44, (caddr_t)&(eh->ether_type),
rx_frame_802_3.an_rx_802_3_payload_len);
if (error) {
m_freem(m);
ifp->if_ierrors++;
return;
}
ifp->if_ipackets++;
/* Receive packet. */
#ifdef ANCACHE
an_cache_store(sc, eh, m, rx_frame.an_rx_signal_strength);
#endif
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
(*ifp->if_input)(ifp, m);
}
static void an_txeof(sc, status)
struct an_softc *sc;
int status;
{
struct ifnet *ifp;
int id;
/* TX DONE enable lan monitor DJA
an_enable_sniff();
*/
ifp = &sc->arpcom.ec_if;
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
id = CSR_READ_2(sc, AN_TX_CMP_FID);
if (status & AN_EV_TX_EXC) {
ifp->if_oerrors++;
} else
ifp->if_opackets++;
#if 0 /*XXX*/
if (id != sc->an_rdata.an_tx_ring[sc->an_rdata.an_tx_cons])
printf("%s: id mismatch: expected %x, got %x\n",
sc->an_dev.dv_xname,
sc->an_rdata.an_tx_ring[sc->an_rdata.an_tx_cons], id);
#endif
sc->an_rdata.an_tx_ring[sc->an_rdata.an_tx_cons] = 0;
AN_INC(sc->an_rdata.an_tx_cons, AN_TX_RING_CNT);
return;
}
/*
* We abuse the stats updater to check the current NIC status. This
* is important because we don't want to allow transmissions until
* the NIC has synchronized to the current cell (either as the master
* in an ad-hoc group, or as a station connected to an access point).
*/
void an_stats_update(xsc)
void *xsc;
{
struct an_softc *sc;
struct ifnet *ifp;
sc = xsc;
ifp = &sc->arpcom.ec_if;
sc->an_status.an_type = AN_RID_STATUS;
sc->an_status.an_len = sizeof(struct an_ltv_status);
an_read_record(sc, (struct an_ltv_gen *)&sc->an_status);
if (sc->an_status.an_opmode & AN_STATUS_OPMODE_IN_SYNC)
sc->an_associated = 1;
else
sc->an_associated = 0;
/* Don't do this while we're transmitting */
if (ifp->if_flags & IFF_OACTIVE) {
callout_reset(&sc->an_stat_ch, hz, an_stats_update, sc);
return;
}
sc->an_stats.an_len = sizeof(struct an_ltv_stats);
sc->an_stats.an_type = AN_RID_32BITS_CUM;
an_read_record(sc, (struct an_ltv_gen *)&sc->an_stats.an_len);
callout_reset(&sc->an_stat_ch, hz, an_stats_update, sc);
return;
}
int an_intr(void *arg)
{
struct an_softc *sc = arg;
struct ifnet *ifp;
u_int16_t status;
if (!sc->sc_enabled)
return 0;
ifp = &sc->arpcom.ec_if;
if (!(ifp->if_flags & IFF_UP)) {
CSR_WRITE_2(sc, AN_EVENT_ACK, 0xFFFF);
CSR_WRITE_2(sc, AN_INT_EN, 0);
return 0;
}
/* Disable interrupts. */
CSR_WRITE_2(sc, AN_INT_EN, 0);
status = CSR_READ_2(sc, AN_EVENT_STAT);
CSR_WRITE_2(sc, AN_EVENT_ACK, ~AN_INTRS);
if (status & AN_EV_AWAKE) {
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_AWAKE);
}
if (status & AN_EV_LINKSTAT) {
if (CSR_READ_2(sc, AN_LINKSTAT) == AN_LINKSTAT_ASSOCIATED)
sc->an_associated = 1;
else
sc->an_associated = 0;
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_LINKSTAT);
}
if (status & AN_EV_RX) {
an_rxeof(sc);
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_RX);
}
if (status & AN_EV_TX) {
an_txeof(sc, status);
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_TX);
}
if (status & AN_EV_TX_EXC) {
an_txeof(sc, status);
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_TX_EXC);
}
if (status & AN_EV_ALLOC)
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_ALLOC);
if (status & AN_EV_CMD) {
wakeup(sc);
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_CMD);
}
/* Re-enable interrupts. */
CSR_WRITE_2(sc, AN_INT_EN, AN_INTRS);
2000-12-14 09:27:23 +03:00
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
an_start(ifp);
return 1;
}
static int
an_cmd(struct an_softc *sc, int cmd, int val)
{
int i, stat;
/* make sure that previous command completed */
if (CSR_READ_2(sc, AN_COMMAND) & AN_CMD_BUSY) {
printf("%s: command busy\n", sc->an_dev.dv_xname);
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_CLR_STUCK_BUSY);
}
CSR_WRITE_2(sc, AN_PARAM0, val);
CSR_WRITE_2(sc, AN_PARAM1, 0);
CSR_WRITE_2(sc, AN_PARAM2, 0);
CSR_WRITE_2(sc, AN_COMMAND, cmd);
for (i = 0; i < AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_EVENT_STAT) & AN_EV_CMD)
break;
/* make sure the command is accepted */
if (CSR_READ_2(sc, AN_COMMAND) == cmd)
CSR_WRITE_2(sc, AN_COMMAND, cmd);
DELAY(10);
}
stat = CSR_READ_2(sc, AN_STATUS);
#if 0
CSR_READ_2(sc, AN_RESP0);
CSR_READ_2(sc, AN_RESP1);
CSR_READ_2(sc, AN_RESP2);
#endif
/* clear stuck command busy if necessary */
if (CSR_READ_2(sc, AN_COMMAND) & AN_CMD_BUSY)
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_CLR_STUCK_BUSY);
/* Ack the command */
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_CMD);
if (i == AN_TIMEOUT)
return ETIMEDOUT;
if (stat & AN_STAT_CMD_RESULT)
return EIO;
return 0;
}
/*
* This reset sequence may look a little strange, but this is the
* most reliable method I've found to really kick the NIC in the
* head and force it to reboot correctly.
*/
static void
an_reset(struct an_softc *sc)
{
if (!sc->sc_enabled)
return;
an_cmd(sc, AN_CMD_ENABLE, 0);
an_cmd(sc, AN_CMD_FW_RESTART, 0);
an_cmd(sc, AN_CMD_NOOP2, 0);
if (an_cmd(sc, AN_CMD_FORCE_SYNCLOSS, 0) == ETIMEDOUT)
printf("%s: reset failed\n", sc->an_dev.dv_xname);
an_cmd(sc, AN_CMD_DISABLE, 0);
return;
}
/*
* Wait for firmware come up after power enabled.
*/
static void
an_wait(struct an_softc *sc)
{
int i;
if (!sc->sc_enabled)
return;
CSR_WRITE_2(sc, AN_COMMAND, AN_CMD_NOOP2);
for (i = 0; i < 3*hz; i++) {
if (CSR_READ_2(sc, AN_EVENT_STAT) & AN_EV_CMD)
break;
(void)tsleep(sc, PWAIT, "anatch", 1);
}
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_CMD);
}
/*
* Read an LTV record from the NIC.
*/
static int an_read_record(sc, ltv)
struct an_softc *sc;
struct an_ltv_gen *ltv;
{
u_int16_t *ptr;
int i, len;
if (ltv->an_len == 0 || ltv->an_type == 0)
return(EINVAL);
/* Tell the NIC to enter record read mode. */
if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_READ, ltv->an_type)) {
printf("%s: RID 0x%04x access failed\n", sc->an_dev.dv_xname,
ltv->an_type);
return(EIO);
}
/* Seek to the record. */
if (an_seek(sc, ltv->an_type, 0, AN_BAP1)) {
printf("%s: RID 0x%04x seek to record failed\n",
sc->an_dev.dv_xname, ltv->an_type);
return(EIO);
}
/*
* Read the length and record type and make sure they
* match what we expect (this verifies that we have enough
* room to hold all of the returned data).
*/
len = CSR_READ_2(sc, AN_DATA1);
if (len > ltv->an_len) {
printf("%s: RID 0x%04x record length mismatch -- expected %d, "
"got %d\n", sc->an_dev.dv_xname,
ltv->an_type, ltv->an_len, len);
return(ENOSPC);
}
ltv->an_len = len;
/* Now read the data. */
ptr = &ltv->an_val;
for (i = 0; i < (ltv->an_len - 2) >> 1; i++)
ptr[i] = CSR_READ_2(sc, AN_DATA1);
return(0);
}
/*
* Same as read, except we inject data instead of reading it.
*/
static int an_write_record(sc, ltv)
struct an_softc *sc;
struct an_ltv_gen *ltv;
{
u_int16_t *ptr;
int i;
if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_READ, ltv->an_type))
return(EIO);
if (an_seek(sc, ltv->an_type, 0, AN_BAP1))
return(EIO);
CSR_WRITE_2(sc, AN_DATA1, ltv->an_len-2);
ptr = &ltv->an_val;
for (i = 0; i < (ltv->an_len - 4) >> 1; i++)
CSR_WRITE_2(sc, AN_DATA1, ptr[i]);
if (an_cmd(sc, AN_CMD_ACCESS|AN_ACCESS_WRITE, ltv->an_type))
return(EIO);
return(0);
}
static int an_seek(sc, id, off, chan)
struct an_softc *sc;
int id, off, chan;
{
int i;
int selreg, offreg;
switch (chan) {
case AN_BAP0:
selreg = AN_SEL0;
offreg = AN_OFF0;
break;
case AN_BAP1:
selreg = AN_SEL1;
offreg = AN_OFF1;
break;
default:
printf("%s: invalid data path: %x\n", sc->an_dev.dv_xname, chan);
return(EIO);
}
CSR_WRITE_2(sc, selreg, id);
CSR_WRITE_2(sc, offreg, off);
for (i = 0; i < AN_TIMEOUT; i++) {
if (!(CSR_READ_2(sc, offreg) & (AN_OFF_BUSY|AN_OFF_ERR)))
break;
DELAY(10);
}
if (i == AN_TIMEOUT)
return(ETIMEDOUT);
return(0);
}
static int an_read_data(sc, id, off, buf, len)
struct an_softc *sc;
int id, off;
caddr_t buf;
int len;
{
int i;
u_int16_t *ptr;
u_int8_t *ptr2;
if (off != -1) {
if (an_seek(sc, id, off, AN_BAP1))
return(EIO);
}
ptr = (u_int16_t *)buf;
for (i = 0; i < len / 2; i++)
ptr[i] = CSR_READ_2(sc, AN_DATA1);
i*=2;
if (i<len){
ptr2 = (u_int8_t *)buf;
ptr2[i] = CSR_READ_1(sc, AN_DATA1);
}
return(0);
}
static int an_write_data(sc, id, off, buf, len)
struct an_softc *sc;
int id, off;
caddr_t buf;
int len;
{
int i;
u_int16_t *ptr;
u_int8_t *ptr2;
if (off != -1) {
if (an_seek(sc, id, off, AN_BAP0))
return(EIO);
}
ptr = (u_int16_t *)buf;
for (i = 0; i < (len / 2); i++)
CSR_WRITE_2(sc, AN_DATA0, ptr[i]);
i*=2;
if (i<len){
ptr2 = (u_int8_t *)buf;
CSR_WRITE_1(sc, AN_DATA0, ptr2[i]);
}
return(0);
}
/*
* Allocate a region of memory inside the NIC and zero
* it out.
*/
static int an_alloc_nicmem(sc, len, id)
struct an_softc *sc;
int len;
int *id;
{
int i;
if (an_cmd(sc, AN_CMD_ALLOC_MEM, len)) {
printf("%s: failed to allocate %d bytes on NIC\n",
sc->an_dev.dv_xname, len);
return(ENOMEM);
}
for (i = 0; i < AN_TIMEOUT; i++) {
if (CSR_READ_2(sc, AN_EVENT_STAT) & AN_EV_ALLOC)
break;
DELAY(10);
}
if (i == AN_TIMEOUT)
return(ETIMEDOUT);
CSR_WRITE_2(sc, AN_EVENT_ACK, AN_EV_ALLOC);
*id = CSR_READ_2(sc, AN_ALLOC_FID);
if (an_seek(sc, *id, 0, AN_BAP0))
return(EIO);
for (i = 0; i < len / 2; i++)
CSR_WRITE_2(sc, AN_DATA0, 0);
return(0);
}
static void an_setdef(sc, areq)
struct an_softc *sc;
struct an_req *areq;
{
struct ifnet *ifp;
struct an_ltv_genconfig *cfg;
struct an_ltv_ssidlist *ssid;
struct an_ltv_aplist *ap;
struct an_ltv_gen *sp;
ifp = &sc->arpcom.ec_if;
switch (areq->an_type) {
case AN_RID_GENCONFIG:
cfg = (struct an_ltv_genconfig *)areq;
bcopy((char *)&cfg->an_macaddr,
(char *)&sc->an_caps.an_oemaddr, ETHER_ADDR_LEN);
bcopy((char *)&cfg->an_macaddr, LLADDR(ifp->if_sadl),
ETHER_ADDR_LEN);
bcopy((char *)cfg, (char *)&sc->an_config,
sizeof(struct an_ltv_genconfig));
break;
case AN_RID_SSIDLIST:
ssid = (struct an_ltv_ssidlist *)areq;
bcopy((char *)ssid, (char *)&sc->an_ssidlist,
sizeof(struct an_ltv_ssidlist));
break;
case AN_RID_APLIST:
ap = (struct an_ltv_aplist *)areq;
bcopy((char *)ap, (char *)&sc->an_aplist,
sizeof(struct an_ltv_aplist));
break;
case AN_RID_TX_SPEED:
sp = (struct an_ltv_gen *)areq;
sc->an_tx_rate = sp->an_val;
break;
case AN_RID_WEP_VOLATILE:
memcpy(&sc->an_temp_keys, areq, sizeof(sc->an_temp_keys));
/* Disable the MAC. */
an_cmd(sc, AN_CMD_DISABLE, 0);
/* Just write the Key, we don't want to save it */
an_write_record(sc, (struct an_ltv_gen *)areq);
/* Turn the MAC back on. */
an_cmd(sc, AN_CMD_ENABLE, 0);
break;
case AN_RID_WEP_PERSISTENT:
/* Disable the MAC. */
an_cmd(sc, AN_CMD_DISABLE, 0);
/* Just write the Key, the card will save it in this mode */
an_write_record(sc, (struct an_ltv_gen *)areq);
/* Turn the MAC back on. */
an_cmd(sc, AN_CMD_ENABLE, 0);
break;
default:
printf("%s: unknown RID: %x\n", sc->an_dev.dv_xname, areq->an_type);
return;
break;
}
/* Reinitialize the card. */
if (ifp->if_flags & IFF_UP)
an_init(ifp);
return;
}
/*
* We can't change the NIC configuration while the MAC is enabled,
* so in order to turn on RX monitor mode, we have to turn the MAC
* off first.
*/
static void an_promisc(sc, promisc)
struct an_softc *sc;
int promisc;
{
/* Disable the MAC. */
an_cmd(sc, AN_CMD_DISABLE, 0);
/* Set RX mode. */
if (promisc &&
!(sc->an_config.an_rxmode & AN_RXMODE_LAN_MONITOR_CURBSS)
) {
sc->an_rxmode = sc->an_config.an_rxmode;
/* kills card DJA, if in sniff mode can't TX packets
sc->an_config.an_rxmode |=
AN_RXMODE_LAN_MONITOR_CURBSS;
*/
} else {
sc->an_config.an_rxmode = sc->an_rxmode;
}
/* Transfer the configuration to the NIC */
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
sc->an_config.an_type = AN_RID_GENCONFIG;
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_config)) {
printf("%s: failed to set configuration\n", sc->an_dev.dv_xname);
return;
}
/* Turn the MAC back on. */
an_cmd(sc, AN_CMD_ENABLE, 0);
return;
}
static int an_ioctl(ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
int i, s;
int error = 0;
struct an_softc *sc;
struct an_req areq;
struct ifreq *ifr;
struct an_ltv_wepkey *akey;
struct ieee80211_nwid nwid;
struct ieee80211_nwkey *nwkey;
struct ieee80211_power *power;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
s = splnet();
switch(command) {
case SIOCSIFFLAGS:
if ((ifp->if_flags & sc->an_if_flags &
(IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING)) {
if (ifp->if_flags & IFF_PROMISC &&
!(sc->an_if_flags & IFF_PROMISC)) {
an_promisc(sc, 1);
break;
}
if (!(ifp->if_flags & IFF_PROMISC) &&
sc->an_if_flags & IFF_PROMISC) {
an_promisc(sc, 0);
break;
}
}
error = ether_ioctl(ifp, command, data);
sc->an_if_flags = ifp->if_flags;
break;
case SIOCGAIRONET:
error = copyin(ifr->ifr_data, &areq, sizeof(areq));
if (error)
break;
#ifdef ANCACHE
if (areq.an_type == AN_RID_ZERO_CACHE) {
sc->an_sigitems = sc->an_nextitem = 0;
break;
} else if (areq.an_type == AN_RID_READ_CACHE) {
char *pt = (char *)&areq.an_val;
bcopy((char *)&sc->an_sigitems, (char *)pt,
sizeof(int));
pt += sizeof(int);
areq.an_len = sizeof(int) / 2;
bcopy((char *)&sc->an_sigcache, (char *)pt,
sizeof(struct an_sigcache) * sc->an_sigitems);
areq.an_len += ((sizeof(struct an_sigcache) *
sc->an_sigitems) / 2) + 1;
} else
#endif
if (an_read_record(sc, (struct an_ltv_gen *)&areq)) {
error = EINVAL;
break;
}
error = copyout(&areq, ifr->ifr_data, sizeof(areq));
break;
case SIOCSAIRONET:
if ((error = suser(curproc->p_ucred, &curproc->p_acflag)))
goto out;
error = copyin(ifr->ifr_data, &areq, sizeof(areq));
if (error)
break;
an_setdef(sc, &areq);
break;
case SIOCS80211NWID:
error = copyin(ifr->ifr_data, &nwid, sizeof(nwid));
if (error)
break;
if (nwid.i_len > IEEE80211_NWID_LEN) {
error = EINVAL;
break;
}
if (sc->an_ssidlist.an_ssid1_len == nwid.i_len &&
memcmp(sc->an_ssidlist.an_ssid1, nwid.i_nwid, nwid.i_len)
== 0)
break;
memset(sc->an_ssidlist.an_ssid1, 0, IEEE80211_NWID_LEN);
sc->an_ssidlist.an_ssid1_len = nwid.i_len;
memcpy(sc->an_ssidlist.an_ssid1, nwid.i_nwid, nwid.i_len);
if (sc->sc_enabled)
an_init(ifp);
break;
case SIOCG80211NWID:
memset(&nwid, 0, sizeof(nwid));
if ((ifp->if_flags & IFF_RUNNING) && sc->an_associated) {
nwid.i_len = sc->an_status.an_ssidlen;
memcpy(nwid.i_nwid, sc->an_status.an_ssid, nwid.i_len);
} else {
nwid.i_len = sc->an_ssidlist.an_ssid1_len;
memcpy(nwid.i_nwid, sc->an_ssidlist.an_ssid1,
nwid.i_len);
}
error = copyout(&nwid, ifr->ifr_data, sizeof(nwid));
break;
case SIOCS80211NWKEY:
nwkey = (struct ieee80211_nwkey *)data;
sc->an_config.an_authtype &= AN_AUTHTYPE_MASK;
if (nwkey->i_wepon)
sc->an_config.an_authtype |= (AN_AUTHTYPE_MASK + 1);
akey = (struct an_ltv_wepkey *)&areq;
memset(akey, 0, sizeof(struct an_ltv_wepkey));
akey->an_type = AN_RID_WEP_VOLATILE;
akey->an_len = sizeof(struct an_ltv_wepkey);
akey->an_key_index = 0;
akey->an_mac_addr[0] = 1; /* default mac */
akey->an_key_len = nwkey->i_key[0].i_keylen;
if (akey->an_key_len > sizeof(akey->an_key)) {
error = EINVAL;
break;
}
if (nwkey->i_key[0].i_keydat != NULL) {
if ((error = copyin(nwkey->i_key[0].i_keydat,
akey->an_key, akey->an_key_len)) != 0)
break;
}
memcpy(&sc->an_temp_keys, akey, sizeof(struct an_ltv_wepkey));
if (sc->sc_enabled)
an_init(ifp);
break;
case SIOCG80211NWKEY:
nwkey = (struct ieee80211_nwkey *)data;
nwkey->i_wepon =
sc->an_config.an_authtype & ~AN_AUTHTYPE_MASK ? 1 : 0;
nwkey->i_defkid = 1;
if (nwkey->i_key[0].i_keydat == NULL)
break;
/* do not show any keys to non-root user */
if ((error = suser(curproc->p_ucred, &curproc->p_acflag)) != 0)
break;
akey = &sc->an_temp_keys;
nwkey->i_key[0].i_keylen = akey->an_key_len;
for (i = 1; i < IEEE80211_WEP_NKID; i++)
nwkey->i_key[i].i_keylen = 0;
error = copyout(akey->an_key, nwkey->i_key[0].i_keydat,
akey->an_key_len);
break;
case SIOCS80211POWER:
power = (struct ieee80211_power *)data;
sc->an_config.an_psave_mode = power->i_enabled ?
AN_PSAVE_PSP : AN_PSAVE_NONE;
sc->an_config.an_listen_interval = power->i_maxsleep;
if (sc->sc_enabled)
an_init(ifp);
break;
case SIOCG80211POWER:
power = (struct ieee80211_power *)data;
power->i_enabled =
sc->an_config.an_psave_mode != AN_PSAVE_NONE ? 1 : 0;
power->i_maxsleep = sc->an_config.an_listen_interval;
break;
#ifdef IFM_IEEE80211
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, command);
break;
#endif
default:
error = ether_ioctl(ifp, command, data);
break;
}
out:
splx(s);
return(error);
}
#ifdef IFM_IEEE80211
static int
an_media_change(ifp)
struct ifnet *ifp;
{
struct an_softc *sc = ifp->if_softc;
struct ifmedia_entry *ime;
int error;
error = 0;
ime = sc->sc_media.ifm_cur;
switch (IFM_SUBTYPE(ime->ifm_media)) {
case IFM_AUTO:
sc->an_tx_rate = 0;
break;
case IFM_IEEE80211_DS1:
sc->an_tx_rate = AN_RATE_1MBPS;
break;
case IFM_IEEE80211_DS2:
sc->an_tx_rate = AN_RATE_2MBPS;
break;
case IFM_IEEE80211_DS5:
sc->an_tx_rate = AN_RATE_5_5MBPS;
break;
case IFM_IEEE80211_DS11:
sc->an_tx_rate = AN_RATE_11MBPS;
break;
}
if (ime->ifm_media & IFM_IEEE80211_ADHOC)
sc->an_config.an_opmode = AN_OPMODE_IBSS_ADHOC;
else
sc->an_config.an_opmode = AN_OPMODE_INFRASTRUCTURE_STATION;
/*
* XXX: how to set txrate for the firmware?
* There is a struct defined as an_txframe, which is used nowhere.
* Perhaps we need to change the transmit mode from 802.3 to native.
*/
if (sc->sc_enabled)
an_init(ifp);
return error;
}
static void
an_media_status(ifp, imr)
struct ifnet *ifp;
struct ifmediareq *imr;
{
struct an_softc *sc = ifp->if_softc;
imr->ifm_status = IFM_AVALID;
if (sc->an_associated)
imr->ifm_status |= IFM_ACTIVE;
imr->ifm_active = IFM_IEEE80211;
switch (sc->an_tx_rate) {
case 0:
imr->ifm_active |= IFM_AUTO;
break;
case AN_RATE_1MBPS:
imr->ifm_active |= IFM_IEEE80211_DS1;
break;
case AN_RATE_2MBPS:
imr->ifm_active |= IFM_IEEE80211_DS2;
break;
case AN_RATE_5_5MBPS:
imr->ifm_active |= IFM_IEEE80211_DS5;
break;
case AN_RATE_11MBPS:
imr->ifm_active |= IFM_IEEE80211_DS11;
break;
}
if ((sc->an_config.an_opmode & 0x0f) == AN_OPMODE_IBSS_ADHOC)
imr->ifm_active |= IFM_IEEE80211_ADHOC;
}
#endif /* IFM_IEEE80211 */
static int an_init_tx_ring(sc)
struct an_softc *sc;
{
int i;
int id;
if (!sc->sc_enabled)
return (0);
for (i = 0; i < AN_TX_RING_CNT; i++) {
if (an_alloc_nicmem(sc, 1518 +
0x44, &id))
return(ENOMEM);
sc->an_rdata.an_tx_fids[i] = id;
sc->an_rdata.an_tx_ring[i] = 0;
}
sc->an_rdata.an_tx_prod = 0;
sc->an_rdata.an_tx_cons = 0;
return(0);
}
static int
an_init(struct ifnet *ifp)
{
struct an_softc *sc = (struct an_softc *)ifp->if_softc;
if (ifp->if_flags & IFF_RUNNING)
an_stop(ifp, 0);
else if (sc->sc_enabled) {
/* re-enable to power on after resume ... */
if (sc->sc_disable)
(*sc->sc_disable)(sc);
sc->sc_enabled = 0;
}
sc->an_associated = 0;
if (!sc->sc_enabled) {
if (sc->sc_enable)
(*sc->sc_enable)(sc);
sc->sc_enabled = 1;
an_wait(sc);
}
/* Allocate the TX buffers */
if (an_init_tx_ring(sc)) {
an_reset(sc);
if (an_init_tx_ring(sc)) {
printf("%s: tx buffer allocation "
"failed\n", sc->an_dev.dv_xname);
return ENOMEM;
}
}
/* Set our MAC address. */
bcopy((char *)&sc->an_caps.an_oemaddr,
(char *)&sc->an_config.an_macaddr, ETHER_ADDR_LEN);
if (ifp->if_flags & IFF_BROADCAST)
sc->an_config.an_rxmode = AN_RXMODE_BC_ADDR;
else
sc->an_config.an_rxmode = AN_RXMODE_ADDR;
if (ifp->if_flags & IFF_MULTICAST)
sc->an_config.an_rxmode = AN_RXMODE_BC_MC_ADDR;
/* Initialize promisc mode. */
/* Kills card DJA can't TX packet in sniff mode
if (ifp->if_flags & IFF_PROMISC)
sc->an_config.an_rxmode |= AN_RXMODE_LAN_MONITOR_CURBSS;
*/
sc->an_rxmode = sc->an_config.an_rxmode;
/* Set the ssid list */
sc->an_ssidlist.an_type = AN_RID_SSIDLIST;
sc->an_ssidlist.an_len = sizeof(struct an_ltv_ssidlist);
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_ssidlist)) {
printf("%s: failed to set ssid list\n", sc->an_dev.dv_xname);
return ENXIO;
}
/* Set the AP list */
sc->an_aplist.an_type = AN_RID_APLIST;
sc->an_aplist.an_len = sizeof(struct an_ltv_aplist);
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_aplist)) {
printf("%s: failed to set AP list\n", sc->an_dev.dv_xname);
return ENXIO;
}
/* Set the configuration in the NIC */
sc->an_config.an_len = sizeof(struct an_ltv_genconfig);
sc->an_config.an_type = AN_RID_GENCONFIG;
if (an_write_record(sc, (struct an_ltv_gen *)&sc->an_config)) {
printf("%s: failed to set configuration\n", sc->an_dev.dv_xname);
return ENXIO;
}
/* Set the WEP Keys */
if ((sc->an_config.an_authtype & ~AN_AUTHTYPE_MASK) != 0) {
sc->an_temp_keys.an_len = sizeof(struct an_ltv_wepkey);
sc->an_temp_keys.an_type = AN_RID_WEP_VOLATILE;
an_write_record(sc, (struct an_ltv_gen *)&sc->an_temp_keys);
}
/* Enable the MAC */
if (an_cmd(sc, AN_CMD_ENABLE, 0)) {
printf("%s: failed to enable MAC\n", sc->an_dev.dv_xname);
return ENXIO;
}
/* enable interrupts */
CSR_WRITE_2(sc, AN_INT_EN, AN_INTRS);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
callout_reset(&sc->an_stat_ch, hz, an_stats_update, sc);
return 0;
}
static void an_start(ifp)
struct ifnet *ifp;
{
struct an_softc *sc;
struct mbuf *m0 = NULL;
struct an_txframe_802_3 tx_frame_802_3;
struct ether_header *eh;
int id;
int idx;
unsigned char txcontrol;
sc = ifp->if_softc;
if (!sc->sc_enabled)
return;
if (ifp->if_flags & IFF_OACTIVE)
return;
if (!sc->an_associated)
return;
idx = sc->an_rdata.an_tx_prod;
bzero((char *)&tx_frame_802_3, sizeof(tx_frame_802_3));
while(sc->an_rdata.an_tx_ring[idx] == 0) {
2000-12-14 09:27:23 +03:00
IFQ_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL)
break;
id = sc->an_rdata.an_tx_fids[idx];
eh = mtod(m0, struct ether_header *);
bcopy((char *)&eh->ether_dhost,
(char *)&tx_frame_802_3.an_tx_dst_addr, ETHER_ADDR_LEN);
bcopy((char *)&eh->ether_shost,
(char *)&tx_frame_802_3.an_tx_src_addr, ETHER_ADDR_LEN);
tx_frame_802_3.an_tx_802_3_payload_len =
m0->m_pkthdr.len - 12; /* minus src/dest mac & type */
m_copydata(m0, sizeof(struct ether_header) - 2 ,
tx_frame_802_3.an_tx_802_3_payload_len,
(caddr_t)&sc->an_txbuf);
txcontrol=AN_TXCTL_8023;
/* write the txcontrol only */
an_write_data(sc, id, 0x08, (caddr_t)&txcontrol,
sizeof(txcontrol));
/* 802_3 header */
an_write_data(sc, id, 0x34, (caddr_t)&tx_frame_802_3,
sizeof(struct an_txframe_802_3));
/* in mbuf header type is just before payload */
an_write_data(sc, id, 0x44, (caddr_t)&sc->an_txbuf,
tx_frame_802_3.an_tx_802_3_payload_len);
#if NBPFILTER > 0
/*
* If there's a BPF listner, bounce a copy of
* this frame to him.
*/
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m0);
#endif
m_freem(m0);
m0 = NULL;
/* TX START disable lan monitor ? DJA
an_disable_sniff():
*/
sc->an_rdata.an_tx_ring[idx] = id;
if (an_cmd(sc, AN_CMD_TX, id))
printf("%s: xmit failed\n", sc->an_dev.dv_xname);
AN_INC(idx, AN_TX_RING_CNT);
}
if (m0 != NULL)
ifp->if_flags |= IFF_OACTIVE;
sc->an_rdata.an_tx_prod = idx;
/*
* Set a timeout in case the chip goes out to lunch.
*/
ifp->if_timer = 5;
return;
}
void an_stop(ifp, disable)
struct ifnet *ifp;
int disable;
{
struct an_softc *sc = (struct an_softc *)ifp->if_softc;
int i;
callout_stop(&sc->an_stat_ch);
if (!sc->sc_enabled)
return;
an_cmd(sc, AN_CMD_FORCE_SYNCLOSS, 0);
CSR_WRITE_2(sc, AN_INT_EN, 0);
an_cmd(sc, AN_CMD_DISABLE, 0);
for (i = 0; i < AN_TX_RING_CNT; i++)
an_cmd(sc, AN_CMD_DEALLOC_MEM, sc->an_rdata.an_tx_fids[i]);
ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
ifp->if_timer = 0;
if (disable) {
if (sc->sc_disable)
(*sc->sc_disable)(sc);
sc->sc_enabled = 0;
}
return;
}
static void an_watchdog(ifp)
struct ifnet *ifp;
{
struct an_softc *sc;
sc = ifp->if_softc;
if (!sc->sc_enabled)
return;
printf("%s: device timeout\n", sc->an_dev.dv_xname);
an_reset(sc);
an_init(ifp);
ifp->if_oerrors++;
return;
}
#ifdef ANCACHE
/* Aironet signal strength cache code.
* store signal/noise/quality on per MAC src basis in
* a small fixed cache. The cache wraps if > MAX slots
* used. The cache may be zeroed out to start over.
* Two simple filters exist to reduce computation:
* 1. ip only (literally 0x800) which may be used
* to ignore some packets. It defaults to ip only.
* it could be used to focus on broadcast, non-IP 802.11 beacons.
* 2. multicast/broadcast only. This may be used to
* ignore unicast packets and only cache signal strength
* for multicast/broadcast packets (beacons); e.g., Mobile-IP
* beacons and not unicast traffic.
*
* The cache stores (MAC src(index), IP src (major clue), signal,
* quality, noise)
*
* No apologies for storing IP src here. It's easy and saves much
* trouble elsewhere. The cache is assumed to be INET dependent,
* although it need not be.
*
* Note: the Aironet only has a single byte of signal strength value
* in the rx frame header, and it's not scaled to anything sensible.
* This is kind of lame, but it's all we've got.
*/
#ifdef documentation
int an_sigitems; /* number of cached entries */
struct an_sigcache an_sigcache[MAXANCACHE]; /* array of cache entries */
int an_nextitem; /* index/# of entries */
#endif
/* control variables for cache filtering. Basic idea is
* to reduce cost (e.g., to only Mobile-IP agent beacons
* which are broadcast or multicast). Still you might
* want to measure signal strength anth unicast ping packets
* on a pt. to pt. ant. setup.
*/
/* set true if you want to limit cache items to broadcast/mcast
* only packets (not unicast). Useful for mobile-ip beacons which
* are broadcast/multicast at network layer. Default is all packets
* so ping/unicast anll work say anth pt. to pt. antennae setup.
*/
static int an_cache_mcastonly = 0;
#if 0
SYSCTL_INT(_machdep, OID_AUTO, an_cache_mcastonly, CTLFLAG_RW,
&an_cache_mcastonly, 0, "");
#endif
/* set true if you want to limit cache items to IP packets only
*/
static int an_cache_iponly = 1;
#if 0
SYSCTL_INT(_machdep, OID_AUTO, an_cache_iponly, CTLFLAG_RW,
&an_cache_iponly, 0, "");
#endif
/*
* an_cache_store, per rx packet store signal
* strength in MAC (src) indexed cache.
*/
static
void an_cache_store (sc, eh, m, rx_quality)
struct an_softc *sc;
struct ether_header *eh;
struct mbuf *m;
unsigned short rx_quality;
{
struct ip *ip = 0;
int i;
static int cache_slot = 0; /* use this cache entry */
static int wrapindex = 0; /* next "free" cache entry */
int saanp=0;
/* filters:
* 1. ip only
* 2. configurable filter to throw out unicast packets,
* keep multicast only.
*/
if ((ntohs(eh->ether_type) == 0x800)) {
saanp = 1;
}
/* filter for ip packets only
*/
if ( an_cache_iponly && !saanp) {
return;
}
/* filter for broadcast/multicast only
*/
if (an_cache_mcastonly && ((eh->ether_dhost[0] & 1) == 0)) {
return;
}
#ifdef SIGDEBUG
printf("an: q value %x (MSB=0x%x, LSB=0x%x) \n",
rx_quality & 0xffff, rx_quality >> 8, rx_quality & 0xff);
#endif
/* find the ip header. we want to store the ip_src
* address.
*/
if (saanp) {
ip = mtod(m, struct ip *);
}
/* do a linear search for a matching MAC address
* in the cache table
* . MAC address is 6 bytes,
* . var w_nextitem holds total number of entries already cached
*/
for(i = 0; i < sc->an_nextitem; i++) {
if (! bcmp(eh->ether_shost , sc->an_sigcache[i].macsrc, 6 )) {
/* Match!,
* so we already have this entry,
* update the data
*/
break;
}
}
/* did we find a matching mac address?
* if yes, then overwrite a previously existing cache entry
*/
if (i < sc->an_nextitem ) {
cache_slot = i;
}
/* else, have a new address entry,so
* add this new entry,
* if table full, then we need to replace LRU entry
*/
else {
/* check for space in cache table
* note: an_nextitem also holds number of entries
* added in the cache table
*/
if ( sc->an_nextitem < MAXANCACHE ) {
cache_slot = sc->an_nextitem;
sc->an_nextitem++;
sc->an_sigitems = sc->an_nextitem;
}
/* no space found, so simply wrap anth wrap index
* and "zap" the next entry
*/
else {
if (wrapindex == MAXANCACHE) {
wrapindex = 0;
}
cache_slot = wrapindex++;
}
}
/* invariant: cache_slot now points at some slot
* in cache.
*/
if (cache_slot < 0 || cache_slot >= MAXANCACHE) {
log(LOG_ERR, "an_cache_store, bad index: %d of "
"[0..%d], gross cache error\n",
cache_slot, MAXANCACHE);
return;
}
/* store items in cache
* .ip source address
* .mac src
* .signal, etc.
*/
if (saanp) {
sc->an_sigcache[cache_slot].ipsrc = ip->ip_src.s_addr;
}
bcopy( eh->ether_shost, sc->an_sigcache[cache_slot].macsrc, 6);
sc->an_sigcache[cache_slot].signal = rx_quality;
return;
}
#endif