NetBSD/sys/arch/i386/conf/Makefile.i386

#	$NetBSD: Makefile.i386,v 1.61 1996/02/02 02:36:34 mycroft Exp $
# 	@(#)Makefile.hp300	8.2 (Berkeley) 1/23/94
#
# Makefile for NetBSD
#
# This makefile is constructed from a machine description:
#	config machineid
# Most changes should be made in the machine description
#	/sys/arch/i386/conf/``machineid''
# after which you should do
#	 config machineid
# Generic makefile changes should be made in
#	/sys/arch/i386/conf/Makefile.i386
# after which config should be rerun for all machines of that type.
#
# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE
#	IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING
#
# -DTRACE	compile in kernel tracing hooks
# -DQUOTA	compile in file system quotas
#

# DEBUG is set to -g by config if debugging is requested (config -g).
# PROF is set to -pg by config if profiling is requested (config -p).
AS=	as ${DEBUG}
AWK=	awk
CC=	cc ${DEBUG}
CPP=	cpp
LD=	ld
TOUCH=	touch -f -c

# source tree is located via $S relative to the compilation directory
S=	../../../..
I386=	../..

INCLUDES= -I. -I$S/arch -I$S -I$S/sys
COPTS=	${INCLUDES} ${IDENT} -D_KERNEL -Di386
CFLAGS=	-O6 -Werror ${COPTS}
LOAD_ADDRESS= F8100000

### find out what to use for libkern
.include "$S/lib/libkern/Makefile.inc"
.ifndef PROF
LIBKERN=	${KERNLIB}
.else
LIBKERN=	${KERNLIB_PROF}
.endif

### find out what to use for libcompat
.include "$S/compat/common/Makefile.inc"
.ifndef PROF
LIBCOMPAT=	${COMPATLIB}
.else
LIBCOMPAT=	${COMPATLIB_PROF}
.endif

# compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP}
# where TYPE is NORMAL, DRIVER, or PROFILE; SUFFIX is the file suffix,
# capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file
# is marked as config-dependent.

NORMAL_C=	${CC} -c ${CFLAGS} ${PROF} $<
NORMAL_C_C=	${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<

DRIVER_C=	${CC} -c ${CFLAGS} ${PROF} $<
DRIVER_C_C=	${CC} -c ${CFLAGS} ${PROF} ${PARAM} $<

PROFILE_C=	${CC} -S -c ${CFLAGS} $< ; \
		sed -e s/_mcount/mcount/ -e s/subrmcount/subr_mcount/ <$*.s | \
		${AS} -o $@; \
		rm -f $*.s

NORMAL_S=	${CPP} -D_LOCORE ${COPTS} $< | ${AS} -o $@
NORMAL_S_C=	${CPP} -D_LOCORE ${COPTS} ${PARAM} $< | ${AS} -o $@

%OBJS

%CFILES

# load lines for config "xxx" will be emitted as:
# xxx: ${SYSTEM_DEP} swapxxx.o
#	${SYSTEM_LD_HEAD}
#	${SYSTEM_LD} swapxxx.o
#	${SYSTEM_LD_TAIL}
SYSTEM_OBJ=	locore.o vnode_if.o ${OBJS} param.o ioconf.o ${LIBKERN} \
		${LIBCOMPAT}
SYSTEM_DEP=	Makefile ${SYSTEM_OBJ}
SYSTEM_LD_HEAD=	rm -f $@
SYSTEM_LD=	@if [ X${DEBUG} = X-g ]; then \
			strip=-X; \
		else \
			strip=-x; \
		fi; \
		echo ${LD} $$strip -z -T ${LOAD_ADDRESS} -o $@ -e start '$${SYSTEM_OBJ}' vers.o; \
		${LD} $$strip -z -T ${LOAD_ADDRESS} -o $@ -e start ${SYSTEM_OBJ} vers.o
SYSTEM_LD_TAIL=	@size $@; chmod 755 $@; \
		if [ X${DEBUG} = X-g ]; then \
			echo cp $@ $@.gdb; rm -f $@.gdb; cp $@ $@.gdb; \
			echo strip -d $@; strip -d $@; \
		fi

%LOAD

newvers: vers.o

vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
	sh $S/conf/newvers.sh
	${CC} ${CFLAGS} -c vers.c

clean::
	rm -f eddep *netbsd netbsd.gdb tags vnode_if.[ch] *.o locore.i \
		[a-z]*.s [Ee]rrs linterrs makelinks genassym

lint: /tmp param.c
	@lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \
	    ${I386}/i386/Locore.c ${CFILES} ${I386}/i386/swapgeneric.c \
	    ioconf.c param.c | \
	    grep -v 'struct/union .* never defined' | \
	    grep -v 'possible pointer alignment problem'

locore.o: assym.h ${I386}/i386/locore.s machine/trap.h machine/psl.h
locore.o: machine/pte.h ${I386}/isa/vector.s ${I386}/isa/icu.s
locore.o: $S/sys/errno.h machine/specialreg.h ${I386}/isa/debug.h
locore.o: ${I386}/isa/icu.h $S/dev/isa/isareg.h $S/net/netisr.h
	${CPP} -D_LOCORE ${COPTS} ${I386}/i386/locore.s | ${AS} -o locore.o

# the following is necessary because autoconf.o depends on #if GENERIC
autoconf.o: Makefile

# the following are necessary because the files depend on the types of
# cpu's included in the system configuration
locore.o machdep.o: Makefile

# depend on network or filesystem configuration
uipc_proto.o vfs_conf.o locore.o: Makefile

# depend on maxusers
assym.h: Makefile

# depends on KDB (cons.o also depends on GENERIC)
trap.o cons.o: Makefile

assym.h: genassym
	./genassym >assym.h

genassym: ${I386}/i386/genassym.c
	${CC} ${INCLUDES} ${IDENT} ${PARAM} -Di386 -o genassym \
	    ${I386}/i386/genassym.c

depend: assym.h param.c vnode_if.h
	mkdep ${COPTS} ${CFILES} ioconf.c param.c
	mkdep -a -p ${INCLUDES} ${IDENT} ${PARAM} ${I386}/i386/genassym.c

links:
	egrep '#if' ${CFILES} | sed -f $S/conf/defines | \
	  sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink
	echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \
	  sort -u | comm -23 - dontlink | \
	  sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks
	sh makelinks && rm -f dontlink

tags:
	@echo "see $S/kern/Makefile for tags"

ioconf.o: ioconf.c
	${CC} -c ${CFLAGS} ioconf.c

param.c: $S/conf/param.c
	rm -f param.c
	cp $S/conf/param.c .

param.o: param.c Makefile
	${CC} -c ${CFLAGS} ${PARAM} param.c

vnode_if.c vnode_if.h: $S/kern/vnode_if.sh $S/kern/vnode_if.src
	AWK="${AWK}" sh $S/kern/vnode_if.sh $S/kern/vnode_if.src

%RULES

### add microcode dependencies
.include "$S/dev/microcode/Makefile.inc"