2009-08-28 18:26:50 +04:00
|
|
|
/* $NetBSD: mime_detach.c,v 1.5 2009/08/28 14:26:50 christos Exp $ */
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
/*-
|
|
|
|
* Copyright (c) 2006 The NetBSD Foundation, Inc.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
|
|
* by Anon Ymous.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef MIME_SUPPORT
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
#ifndef __lint__
|
2009-08-28 18:26:50 +04:00
|
|
|
__RCSID("$NetBSD: mime_detach.c,v 1.5 2009/08/28 14:26:50 christos Exp $");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#endif /* not __lint__ */
|
|
|
|
|
|
|
|
#include <assert.h>
|
|
|
|
#include <err.h>
|
|
|
|
#include <fcntl.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
|
|
|
|
#include "def.h"
|
|
|
|
#include "extern.h"
|
|
|
|
#ifdef USE_EDITLINE
|
|
|
|
#include "complete.h"
|
|
|
|
#endif
|
|
|
|
#ifdef MIME_SUPPORT
|
|
|
|
#include "mime.h"
|
|
|
|
#include "mime_child.h"
|
|
|
|
#include "mime_codecs.h"
|
|
|
|
#include "mime_detach.h"
|
|
|
|
#endif
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
#include "sig.h"
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
|
|
|
|
static struct {
|
|
|
|
int overwrite;
|
|
|
|
int batch;
|
|
|
|
int ask;
|
|
|
|
} detach_ctl;
|
|
|
|
|
|
|
|
PUBLIC int
|
|
|
|
mime_detach_control(void)
|
|
|
|
{
|
|
|
|
char *cp;
|
|
|
|
|
|
|
|
detach_ctl.batch = value(ENAME_MIME_DETACH_BATCH) != NULL;
|
|
|
|
detach_ctl.ask = detach_ctl.batch ? 0 : 1;
|
|
|
|
detach_ctl.overwrite = 0;
|
|
|
|
|
|
|
|
cp = value(ENAME_MIME_DETACH_OVERWRITE);
|
|
|
|
if (cp == NULL || strcasecmp(cp, "no") == 0)
|
|
|
|
detach_ctl.overwrite = 0;
|
|
|
|
|
|
|
|
else if (*cp== '\0' || strcasecmp(cp, "yes") == 0)
|
|
|
|
detach_ctl.overwrite = 1;
|
|
|
|
|
|
|
|
else if (strcasecmp(cp, "ask") == 0) {
|
|
|
|
detach_ctl.overwrite = 0;
|
|
|
|
detach_ctl.ask = 1;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
(void)printf("invalid %s setting: %s",
|
|
|
|
ENAME_MIME_DETACH_OVERWRITE, cp);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static char *
|
|
|
|
detach_get_fname(char *prompt, char *pathname)
|
|
|
|
{
|
|
|
|
if (!detach_ctl.batch) {
|
|
|
|
char *fname;
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
fname = my_gets(&elm.filec, prompt, pathname);
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
if (fname == NULL) /* ignore this attachment */
|
|
|
|
return NULL;
|
|
|
|
(void)strip_WSP(fname);
|
|
|
|
fname = skip_WSP(fname);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (*fname == '\0') /* ignore this attachment */
|
|
|
|
return NULL;
|
|
|
|
pathname = savestr(fname); /* save this or it gets trashed */
|
|
|
|
}
|
|
|
|
else if (detach_ctl.ask)
|
|
|
|
(void)printf("%s%s\n", prompt, pathname);
|
|
|
|
|
|
|
|
return pathname;
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum {
|
|
|
|
DETACH_OPEN_OK,
|
|
|
|
DETACH_NEXT,
|
|
|
|
DETACH_RENAME,
|
|
|
|
DETACH_FAILED
|
|
|
|
}
|
|
|
|
detach_open_core(char *fname, const char *partstr)
|
|
|
|
{
|
|
|
|
int flags;
|
|
|
|
int fd;
|
|
|
|
|
|
|
|
flags = (detach_ctl.overwrite ? 0 : O_EXCL) | O_CREAT | O_TRUNC | O_WRONLY;
|
2007-10-23 18:58:43 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((fd = open(fname, flags, 0600)) != -1 &&
|
|
|
|
Fdopen(fd, "w") != NULL)
|
|
|
|
return DETACH_OPEN_OK;
|
2007-10-23 18:58:43 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (detach_ctl.ask && fd == -1 && errno == EEXIST) {
|
|
|
|
char *p;
|
|
|
|
start:
|
|
|
|
(void)sasprintf(&p, "%-7s overwrite: Always/Never/once/next/rename (ANonr)[n]? ",
|
|
|
|
partstr, fname);
|
|
|
|
p = my_gets(&elm.string, p, NULL);
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
if (p == NULL)
|
|
|
|
goto start;
|
|
|
|
|
|
|
|
(void)strip_WSP(p);
|
2007-10-23 18:58:43 +04:00
|
|
|
p = skip_WSP(p);
|
From Anon Ymous:
- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.
- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.
- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.
- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.
- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.
- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.
- Lint cleanup.
- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.
- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".
- Document the "pager-off" variable: if set, it disables paging
entirely.
2009-04-10 17:08:24 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
switch (*p) {
|
|
|
|
case 'A': detach_ctl.overwrite = 1;
|
|
|
|
detach_ctl.batch = 1;
|
|
|
|
detach_ctl.ask = 0;
|
|
|
|
/* FALLTHROUGH */
|
|
|
|
case 'o':
|
|
|
|
if (Fopen(fname, "w") != NULL)
|
|
|
|
return DETACH_OPEN_OK;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 'N': detach_ctl.overwrite = 0;
|
|
|
|
detach_ctl.batch = 1;
|
|
|
|
detach_ctl.ask = 0;
|
|
|
|
/* FALLTHROUGH */
|
|
|
|
case '\0': /* default */
|
|
|
|
case 'n': /* Next */
|
|
|
|
return DETACH_NEXT;
|
|
|
|
|
|
|
|
default:
|
|
|
|
goto start;
|
|
|
|
|
|
|
|
case 'r': /* Rename */
|
|
|
|
return DETACH_RENAME;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
warn(fname);
|
|
|
|
if (fd != -1)
|
|
|
|
(void)close(fd);
|
|
|
|
|
|
|
|
return DETACH_FAILED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static char *
|
|
|
|
detach_open_target(struct mime_info *mip)
|
|
|
|
{
|
|
|
|
char *pathname;
|
|
|
|
char *prompt;
|
2009-08-28 18:26:50 +04:00
|
|
|
const char *partstr;
|
|
|
|
const char *subtype;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX: If partstr == NULL, we probably shouldn't be detaching
|
|
|
|
* anything, but let's be liberal and try to do something with
|
|
|
|
* the block anyway.
|
|
|
|
*/
|
|
|
|
partstr = mip->mi_partstr && mip->mi_partstr[0] ? mip->mi_partstr : "0";
|
|
|
|
subtype = mip->mi_subtype ? mip->mi_subtype : "unknown";
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the suggested target pathname.
|
|
|
|
*/
|
|
|
|
if (mip->mi_filename != NULL)
|
2009-08-28 18:26:50 +04:00
|
|
|
(void)sasprintf(&pathname, "%s/%s", mip->mi_detachdir,
|
|
|
|
mip->mi_filename);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
else {
|
|
|
|
if (mip->mi_detachall == 0)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
(void)sasprintf(&pathname, "%s/msg-%s.part-%s.%s",
|
2007-10-23 18:58:43 +04:00
|
|
|
mip->mi_detachdir, mip->mi_msgstr,
|
2009-08-28 18:26:50 +04:00
|
|
|
partstr, subtype);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make up the prompt
|
|
|
|
*/
|
2009-08-28 18:26:50 +04:00
|
|
|
(void)sasprintf(&prompt, "%-7s filename: ", partstr);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The main loop.
|
|
|
|
*/
|
|
|
|
do {
|
|
|
|
struct stat sb;
|
|
|
|
char *fname;
|
|
|
|
|
|
|
|
if ((fname = detach_get_fname(prompt, pathname)) == NULL)
|
|
|
|
return NULL;
|
|
|
|
/*
|
|
|
|
* Make sure we don't have the name of something other
|
|
|
|
* than a normal file!
|
|
|
|
*/
|
|
|
|
if (stat(fname, &sb) == 0 && !S_ISREG(sb.st_mode)) {
|
|
|
|
(void)printf("not a regular file: %s", fname);
|
|
|
|
if (!detach_ctl.ask)
|
|
|
|
return NULL;
|
|
|
|
continue;
|
|
|
|
}
|
2009-08-28 18:26:50 +04:00
|
|
|
switch (detach_open_core(fname, partstr)) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
case DETACH_OPEN_OK:
|
|
|
|
return fname;
|
|
|
|
case DETACH_NEXT:
|
|
|
|
return NULL;
|
|
|
|
case DETACH_RENAME:
|
|
|
|
detach_ctl.batch = 0;
|
|
|
|
break;
|
|
|
|
case DETACH_FAILED:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} while (!detach_ctl.batch);
|
2007-10-23 18:58:43 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The main entry point for detaching.
|
|
|
|
*/
|
|
|
|
PUBLIC FILE *
|
|
|
|
mime_detach_parts(struct mime_info *mip)
|
|
|
|
{
|
|
|
|
mime_codec_t dec;
|
|
|
|
char *pathname;
|
|
|
|
|
|
|
|
if (mip->mi_ignore_body || mip->mp->m_blines == 0)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if ((dec = mime_fio_decoder(mip->mi_encoding)) == NULL &&
|
|
|
|
(dec = mime_fio_decoder(MIME_TRANSFER_7BIT)) == NULL)
|
|
|
|
assert(/*CONSTCOND*/ 0); /* this should never get hit! */
|
2007-10-23 18:58:43 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((pathname = detach_open_target(mip)) == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
(void)printf("writing: %s\n", pathname);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX - should we do character set conversion here (done by
|
|
|
|
* run_decoder()), or just run dec()?
|
|
|
|
*/
|
|
|
|
#if 0
|
|
|
|
mime_run_function(dec, pipe_end(mip), NULL);
|
|
|
|
#else
|
|
|
|
run_decoder(mip, dec);
|
|
|
|
#endif
|
|
|
|
return pipe_end(mip);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set the message part number to be used when constructing a filename
|
|
|
|
* for detaching unnamed parts in detach_open_target(). When
|
|
|
|
* threading, this is not a single number, hence the string value.
|
|
|
|
*/
|
|
|
|
PUBLIC void
|
|
|
|
mime_detach_msgnum(struct mime_info *mip, const char *msgstr)
|
|
|
|
{
|
|
|
|
for (/*EMPTY*/; mip; mip = mip->mi_flink)
|
|
|
|
mip->mi_msgstr = msgstr;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* MIME_SUPPORT */
|