From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* $NetBSD: cmd1.c,v 1.28 2006/11/28 18:45:32 christos Exp $ */
|
1996-06-08 23:48:09 +04:00
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*-
|
1994-06-29 09:09:04 +04:00
|
|
|
* Copyright (c) 1980, 1993
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
1993-03-21 12:45:37 +03:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
2003-08-07 15:13:06 +04:00
|
|
|
* 3. Neither the name of the University nor the names of its contributors
|
1993-03-21 12:45:37 +03:00
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
1997-10-19 09:02:57 +04:00
|
|
|
#include <sys/cdefs.h>
|
1993-03-21 12:45:37 +03:00
|
|
|
#ifndef lint
|
1996-06-08 23:48:09 +04:00
|
|
|
#if 0
|
1996-12-28 10:10:57 +03:00
|
|
|
static char sccsid[] = "@(#)cmd1.c 8.2 (Berkeley) 4/20/95";
|
1996-06-08 23:48:09 +04:00
|
|
|
#else
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
__RCSID("$NetBSD: cmd1.c,v 1.28 2006/11/28 18:45:32 christos Exp $");
|
1996-06-08 23:48:09 +04:00
|
|
|
#endif
|
1993-03-21 12:45:37 +03:00
|
|
|
#endif /* not lint */
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#include <assert.h>
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
#include "rcv.h"
|
1994-06-29 09:09:04 +04:00
|
|
|
#include "extern.h"
|
2006-10-31 23:07:32 +03:00
|
|
|
#include "format.h"
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef MIME_SUPPORT
|
|
|
|
#include "mime.h"
|
|
|
|
#endif
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#include "thread.h"
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Mail -- a mail program
|
|
|
|
*
|
|
|
|
* User commands.
|
|
|
|
*/
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int screen;
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Compute screen size.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int
|
|
|
|
screensize(void)
|
|
|
|
{
|
|
|
|
int s;
|
|
|
|
char *cp;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((cp = value(ENAME_SCREEN)) != NULL && (s = atoi(cp)) > 0)
|
|
|
|
return s;
|
|
|
|
return screenheight - 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print out the header of a specific message.
|
|
|
|
* This is a slight improvement to the standard one.
|
|
|
|
*/
|
|
|
|
PUBLIC void
|
|
|
|
printhead(int mesg)
|
|
|
|
{
|
|
|
|
const char *fmtstr;
|
|
|
|
char *msgline;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
fmtstr = value(ENAME_HEADER_FORMAT);
|
|
|
|
if (fmtstr == NULL)
|
|
|
|
fmtstr = DEFAULT_HEADER_FORMAT;
|
|
|
|
msgline = smsgprintf(fmtstr, get_message(mesg));
|
|
|
|
if (screenwidth > 0)
|
|
|
|
msgline[screenwidth] = '\0';
|
|
|
|
(void)printf("%s\n", msgline);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print the current active headings.
|
|
|
|
* Don't change dot if invoker didn't give an argument.
|
|
|
|
*/
|
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
headers(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1996-06-08 23:48:09 +04:00
|
|
|
int *msgvec = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int n, flag;
|
1997-10-19 09:02:57 +04:00
|
|
|
struct message *mp;
|
1993-03-21 12:45:37 +03:00
|
|
|
int size;
|
|
|
|
|
|
|
|
size = screensize();
|
|
|
|
n = msgvec[0];
|
|
|
|
if (n != 0)
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
screen = (n - 1)/size;
|
1993-03-21 12:45:37 +03:00
|
|
|
if (screen < 0)
|
|
|
|
screen = 0;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
if ((mp = get_message(screen * size + 1)) == NULL) {
|
|
|
|
int msgCount;
|
|
|
|
msgCount = get_msgCount();
|
|
|
|
if (screen * size + 1 > msgCount)
|
|
|
|
mp = get_message(msgCount - size + 1);
|
|
|
|
if (mp == NULL)
|
|
|
|
mp = get_message(1);
|
|
|
|
}
|
1993-03-21 12:45:37 +03:00
|
|
|
flag = 0;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (dot != get_message(n))
|
1993-03-21 12:45:37 +03:00
|
|
|
dot = mp;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
for (/*EMPTY*/; mp; mp = next_message(mp)) {
|
1993-03-21 12:45:37 +03:00
|
|
|
if (mp->m_flag & MDELETED)
|
|
|
|
continue;
|
|
|
|
if (flag++ >= size)
|
|
|
|
break;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
printhead(get_msgnum(mp));
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
if (flag == 0) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("No more mail.\n");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Scroll to the next/previous screen
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
scroll(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1996-06-08 23:48:09 +04:00
|
|
|
char *arg = v;
|
1997-10-19 09:02:57 +04:00
|
|
|
int s, size;
|
1993-03-21 12:45:37 +03:00
|
|
|
int cur[1];
|
|
|
|
|
|
|
|
cur[0] = 0;
|
|
|
|
size = screensize();
|
|
|
|
s = screen;
|
|
|
|
switch (*arg) {
|
|
|
|
case 0:
|
|
|
|
case '+':
|
|
|
|
s++;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (s * size >= get_msgCount()) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("On last screenful of messages\n");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
screen = s;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case '-':
|
|
|
|
if (--s < 0) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("On first screenful of messages\n");
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
screen = s;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("Unrecognized scrolling command \"%s\"\n", arg);
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 1;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return headers(cur);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print out the headlines for each message
|
|
|
|
* in the passed message list.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
from(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1996-06-08 23:48:09 +04:00
|
|
|
int *msgvec = v;
|
1997-10-19 09:02:57 +04:00
|
|
|
int *ip;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
1997-05-17 23:47:50 +04:00
|
|
|
for (ip = msgvec; *ip != 0; ip++)
|
1993-03-21 12:45:37 +03:00
|
|
|
printhead(*ip);
|
|
|
|
if (--ip >= msgvec)
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
dot = get_message(*ip);
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print out the value of dot.
|
|
|
|
*/
|
2005-07-20 03:07:10 +04:00
|
|
|
/*ARGSUSED*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
pdot(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int *msgvec;
|
|
|
|
|
|
|
|
msgvec = v;
|
|
|
|
dot = get_message(msgvec[0]);
|
|
|
|
|
|
|
|
(void)printf("%d\n", get_msgnum(dot));
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print out all the possible commands.
|
|
|
|
*/
|
2005-07-20 03:07:10 +04:00
|
|
|
/*ARGSUSED*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2006-10-22 01:37:20 +04:00
|
|
|
pcmdlist(void *v __unused)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
const struct cmd *cp;
|
|
|
|
int cc;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("Commands are:\n");
|
1993-03-21 12:45:37 +03:00
|
|
|
for (cc = 0, cp = cmdtab; cp->c_name != NULL; cp++) {
|
|
|
|
cc += strlen(cp->c_name) + 2;
|
|
|
|
if (cc > 72) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("\n");
|
1993-03-21 12:45:37 +03:00
|
|
|
cc = strlen(cp->c_name) + 2;
|
|
|
|
}
|
2006-10-22 01:37:20 +04:00
|
|
|
if ((cp + 1)->c_name != NULL)
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("%s, ", cp->c_name);
|
1993-03-21 12:45:37 +03:00
|
|
|
else
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("%s\n", cp->c_name);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC char *
|
|
|
|
sget_msgnum(struct message *mp, struct message *parent)
|
|
|
|
{
|
|
|
|
char *p;
|
|
|
|
if (parent == NULL || parent == mp) {
|
|
|
|
(void)sasprintf(&p, "%d", mp->m_index);
|
|
|
|
return p;
|
|
|
|
}
|
|
|
|
p = sget_msgnum(mp->m_plink, parent);
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)sasprintf(&p, "%s.%d", p, mp->m_index);
|
|
|
|
return p;
|
2006-10-22 01:37:20 +04:00
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void
|
|
|
|
show_msgnum(FILE *obuf, struct message *mp, struct message *parent)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (value(ENAME_QUIET) == NULL)
|
|
|
|
(void)fprintf(obuf, "Message %s:\n", sget_msgnum(mp, parent));
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
struct type1_core_args_s {
|
|
|
|
FILE *obuf;
|
|
|
|
struct message *parent;
|
|
|
|
struct ignoretab *igtab;
|
|
|
|
struct mime_info **mip;
|
|
|
|
};
|
|
|
|
static int
|
|
|
|
type1_core(struct message *mp, void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
struct type1_core_args_s *args;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
args = v;
|
|
|
|
touch(mp);
|
|
|
|
show_msgnum(args->obuf, mp, args->parent);
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef MIME_SUPPORT
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (args->mip == NULL)
|
|
|
|
(void)mime_sendmessage(mp, args->obuf, args->igtab, NULL, NULL);
|
|
|
|
else {
|
|
|
|
*args->mip = mime_decode_open(mp);
|
|
|
|
(void)mime_sendmessage(mp, args->obuf, args->igtab, NULL, *args->mip);
|
|
|
|
mime_decode_close(*args->mip);
|
|
|
|
}
|
2006-10-22 01:37:20 +04:00
|
|
|
#else
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)sendmessage(mp, args->obuf, args->igtab, NULL, NULL);
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Respond to a broken pipe signal --
|
|
|
|
* probably caused by quitting more.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static jmp_buf pipestop;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/*ARGSUSED*/
|
|
|
|
static void
|
|
|
|
brokpipe(int signo __unused)
|
|
|
|
{
|
|
|
|
longjmp(pipestop, 1);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Type out the messages requested.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#ifndef MIME_SUPPORT
|
|
|
|
# define type1(a,b,c) legacy_type1(a,b)
|
|
|
|
#endif
|
|
|
|
static int
|
|
|
|
type1(int *msgvec, int doign, int mime_decode)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int recursive;
|
|
|
|
int *ip;
|
|
|
|
int msgCount;
|
|
|
|
/*
|
|
|
|
* Some volatile variables so longjmp will get the current not
|
|
|
|
* starting values. Note it is the variable that is volatile,
|
|
|
|
* not what it is pointing at!
|
|
|
|
*/
|
|
|
|
FILE *volatile obuf; /* avoid longjmp clobbering? */
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef MIME_SUPPORT
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
sig_t volatile oldsigpipe; /* XXX - is volatile needed? */
|
|
|
|
struct mime_info *volatile mip; /* avoid longjmp clobbering - needed */
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((obuf = last_registered_file(0)) == NULL)
|
|
|
|
obuf = stdout;
|
2006-10-22 01:37:20 +04:00
|
|
|
|
|
|
|
#ifdef MIME_SUPPORT
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
mip = NULL;
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
oldsigpipe = signal(SIGPIPE, SIG_IGN);
|
|
|
|
|
|
|
|
if (setjmp(pipestop))
|
|
|
|
goto close_pipe;
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)signal(SIGPIPE, brokpipe);
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
msgCount = get_msgCount();
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
recursive = do_recursion();
|
|
|
|
for (ip = msgvec; *ip && ip - msgvec < msgCount; ip++) {
|
|
|
|
struct type1_core_args_s args;
|
|
|
|
struct message *mp;
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
mp = get_message(*ip);
|
|
|
|
dot = mp;
|
|
|
|
args.obuf = obuf;
|
|
|
|
args.parent = recursive ? mp : NULL;
|
|
|
|
args.igtab = doign ? ignore : 0;
|
2006-10-22 01:37:20 +04:00
|
|
|
#ifdef MIME_SUPPORT
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
args.mip = mime_decode ? __UNVOLATILE(&mip) : NULL;
|
2006-10-22 01:37:20 +04:00
|
|
|
#else
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
args.mip = NULL;
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)thread_recursion(mp, type1_core, &args);
|
|
|
|
}
|
|
|
|
#ifdef MIME_SUPPORT
|
|
|
|
close_pipe:
|
|
|
|
if (mip != NULL) {
|
|
|
|
/*
|
|
|
|
* Ignore SIGPIPE so it can't cause a duplicate close.
|
|
|
|
*/
|
|
|
|
(void)signal(SIGPIPE, SIG_IGN);
|
|
|
|
mime_decode_close(mip);
|
|
|
|
(void)signal(SIGPIPE, oldsigpipe);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
return 0;
|
2006-10-22 01:37:20 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef MIME_SUPPORT
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
static int
|
|
|
|
de_mime(void)
|
|
|
|
{
|
|
|
|
return value(ENAME_MIME_DECODE_MSG) != NULL;
|
2006-10-22 01:37:20 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Identical to type(), but with opposite mime behavior.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2006-10-22 01:37:20 +04:00
|
|
|
view(void *v)
|
|
|
|
{
|
|
|
|
int *msgvec = v;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return type1(msgvec, 1, !de_mime());
|
2006-10-22 01:37:20 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Identical to Type(), but with opposite mime behavior.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2006-10-22 01:37:20 +04:00
|
|
|
View(void *v)
|
|
|
|
{
|
|
|
|
int *msgvec = v;
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return type1(msgvec, 0, !de_mime());
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
2006-10-22 01:37:20 +04:00
|
|
|
#endif /* MIME_SUPPORT */
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Type out messages, honor ignored fields.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
type(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int *msgvec = v;
|
2006-10-22 01:37:20 +04:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return type1(msgvec, 1, de_mime());
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
* Type out messages, even printing ignored fields.
|
1993-03-21 12:45:37 +03:00
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
|
|
|
Type(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int *msgvec = v;
|
|
|
|
|
|
|
|
return type1(msgvec, 0, de_mime());
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
Jumbo mail patch from our anonymous user:
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
|
|
|
/*
|
|
|
|
* Pipe the current message buffer to a command.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
Jumbo mail patch from our anonymous user:
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
|
|
|
pipecmd(void *v)
|
|
|
|
{
|
|
|
|
char *cmd = v;
|
2006-10-22 01:37:20 +04:00
|
|
|
FILE *volatile obuf; /* void longjmp clobbering - we want
|
|
|
|
the current value not start value */
|
Jumbo mail patch from our anonymous user:
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
|
|
|
if (dot == NULL) {
|
|
|
|
warn("pipcmd: no current message");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
obuf = stdout;
|
|
|
|
if (setjmp(pipestop))
|
|
|
|
goto close_pipe;
|
|
|
|
|
|
|
|
obuf = Popen(cmd, "w");
|
|
|
|
if (obuf == NULL) {
|
|
|
|
warn("pipecmd: Popen failed: %s", cmd);
|
|
|
|
return 1;
|
|
|
|
} else
|
|
|
|
(void)signal(SIGPIPE, brokpipe);
|
|
|
|
|
2006-10-22 01:37:20 +04:00
|
|
|
(void)sendmessage(dot, obuf, ignoreall, NULL, NULL);
|
Jumbo mail patch from our anonymous user:
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
|
|
|
close_pipe:
|
|
|
|
if (obuf != stdout) {
|
|
|
|
/*
|
|
|
|
* Ignore SIGPIPE so it can't cause a duplicate close.
|
|
|
|
*/
|
|
|
|
(void)signal(SIGPIPE, SIG_IGN);
|
2006-10-22 01:37:20 +04:00
|
|
|
(void)Pclose(obuf);
|
Jumbo mail patch from our anonymous user:
1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).
2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.
3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.
4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.
5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.
6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:
mail -c "foo bar" christos
will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.
7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.
8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
|
|
|
(void)signal(SIGPIPE, SIG_DFL);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
|
|
|
|
struct top_core_args_s {
|
|
|
|
int lineb;
|
|
|
|
int topl;
|
|
|
|
struct message *parent;
|
|
|
|
};
|
|
|
|
static int
|
|
|
|
top_core(struct message *mp, void *v)
|
|
|
|
{
|
|
|
|
char buffer[LINESIZE];
|
|
|
|
struct top_core_args_s *args;
|
|
|
|
FILE *ibuf;
|
|
|
|
int lines;
|
|
|
|
int c;
|
|
|
|
|
|
|
|
args = v;
|
|
|
|
touch(mp);
|
|
|
|
if (!args->lineb)
|
|
|
|
(void)printf("\n");
|
|
|
|
show_msgnum(stdout, mp, args->parent);
|
|
|
|
ibuf = setinput(mp);
|
|
|
|
c = mp->m_lines;
|
|
|
|
for (lines = 0; lines < c && lines <= args->topl; lines++) {
|
|
|
|
if (mail_readline(ibuf, buffer, sizeof(buffer)) < 0)
|
|
|
|
break;
|
|
|
|
(void)puts(buffer);
|
|
|
|
args->lineb = blankline(buffer);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
|
|
|
* Print the top so many lines of each desired message.
|
|
|
|
* The number of lines is taken from the variable "toplines"
|
|
|
|
* and defaults to 5.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
top(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
struct top_core_args_s args;
|
|
|
|
int recursive;
|
|
|
|
int msgCount;
|
1996-06-08 23:48:09 +04:00
|
|
|
int *msgvec = v;
|
1997-10-19 09:02:57 +04:00
|
|
|
int *ip;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
int topl;
|
|
|
|
char *valtop;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
topl = 5;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
valtop = value(ENAME_TOPLINES);
|
2002-03-04 06:07:25 +03:00
|
|
|
if (valtop != NULL) {
|
1993-03-21 12:45:37 +03:00
|
|
|
topl = atoi(valtop);
|
|
|
|
if (topl < 0 || topl > 10000)
|
|
|
|
topl = 5;
|
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
args.topl = topl;
|
|
|
|
args.lineb = 1;
|
|
|
|
recursive = do_recursion();
|
|
|
|
msgCount = get_msgCount();
|
|
|
|
for (ip = msgvec; *ip && ip - msgvec < msgCount; ip++) {
|
|
|
|
struct message *mp;
|
|
|
|
|
|
|
|
mp = get_message(*ip);
|
1993-03-21 12:45:37 +03:00
|
|
|
dot = mp;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
args.parent = recursive ? mp : NULL;
|
|
|
|
(void)thread_recursion(mp, top_core, &args);
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Touch all the given messages so that they will
|
|
|
|
* get mboxed.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
stouch(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1996-06-08 23:48:09 +04:00
|
|
|
int *msgvec = v;
|
1997-10-19 09:02:57 +04:00
|
|
|
int *ip;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
for (ip = msgvec; *ip != 0; ip++)
|
|
|
|
dot = set_m_flag(*ip, ~(MPRESERVE | MTOUCH), MTOUCH);
|
|
|
|
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure all passed messages get mboxed.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2002-03-02 17:59:35 +03:00
|
|
|
mboxit(void *v)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1996-06-08 23:48:09 +04:00
|
|
|
int *msgvec = v;
|
1997-10-19 09:02:57 +04:00
|
|
|
int *ip;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
for (ip = msgvec; *ip != 0; ip++)
|
|
|
|
dot = set_m_flag(*ip,
|
|
|
|
~(MPRESERVE | MTOUCH | MBOX), MTOUCH | MBOX);
|
|
|
|
|
|
|
|
return 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* List the folders the user currently has.
|
|
|
|
*/
|
2005-07-20 03:07:10 +04:00
|
|
|
/*ARGSUSED*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2006-10-22 01:37:20 +04:00
|
|
|
folders(void *v __unused)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-05-13 10:15:52 +04:00
|
|
|
char dirname[PATHSIZE];
|
2005-07-19 05:38:38 +04:00
|
|
|
const char *cmd;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if (getfold(dirname, sizeof(dirname)) < 0) {
|
2005-07-20 03:07:10 +04:00
|
|
|
(void)printf("No value set for \"folder\"\n");
|
1993-03-21 12:45:37 +03:00
|
|
|
return 1;
|
|
|
|
}
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
if ((cmd = value(ENAME_LISTER)) == NULL)
|
1993-03-21 12:45:37 +03:00
|
|
|
cmd = "ls";
|
2003-03-30 00:41:04 +03:00
|
|
|
(void)run_command(cmd, 0, -1, -1, dirname, NULL);
|
1993-03-21 12:45:37 +03:00
|
|
|
return 0;
|
|
|
|
}
|
1996-12-28 10:10:57 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Update the mail file with any new messages that have
|
|
|
|
* come in since we started reading mail.
|
|
|
|
*/
|
2005-07-20 03:07:10 +04:00
|
|
|
/*ARGSUSED*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC int
|
2006-10-22 01:37:20 +04:00
|
|
|
inc(void *v __unused)
|
1996-12-28 10:10:57 +03:00
|
|
|
{
|
|
|
|
int nmsg, mdot;
|
|
|
|
|
|
|
|
nmsg = incfile();
|
|
|
|
|
|
|
|
if (nmsg == 0) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)printf("No new mail.\n");
|
1996-12-28 10:10:57 +03:00
|
|
|
} else if (nmsg > 0) {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
struct message *mp;
|
|
|
|
mdot = newfileinfo(get_abs_msgCount() - nmsg);
|
|
|
|
if ((mp = get_message(mdot)) != NULL)
|
|
|
|
dot = mp;
|
1996-12-28 10:10:57 +03:00
|
|
|
} else {
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
(void)printf("\"inc\" command failed...\n");
|
1996-12-28 10:10:57 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|