2003-02-27 22:22:36 +03:00
|
|
|
# $NetBSD: GENERIC,v 1.7 2003/02/27 19:22:48 perseant Exp $
|
2002-11-25 04:05:58 +03:00
|
|
|
#
|
|
|
|
# GENERIC machine description file
|
|
|
|
#
|
|
|
|
# This machine description file is used to generate the default NetBSD
|
|
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
|
|
# and device drivers, but should be useful for most applications.
|
|
|
|
#
|
|
|
|
# The machine description file can be customised for your specific
|
|
|
|
# machine to reduce the kernel size and improve its performance.
|
|
|
|
#
|
|
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
|
|
# man page.
|
|
|
|
#
|
|
|
|
# For further information on hardware support for this architecture, see
|
|
|
|
# the intro(4) man page. For further information about kernel options
|
|
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
|
|
# of each device driver in this file see the section 4 man page for the
|
|
|
|
# device.
|
|
|
|
|
|
|
|
include "arch/x86_64/conf/std.x86_64"
|
|
|
|
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
|
2003-02-27 22:22:36 +03:00
|
|
|
#ident "GENERIC-$Revision: 1.7 $"
|
2002-11-25 04:05:58 +03:00
|
|
|
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
|
|
|
|
options MTRR # memory-type range register syscall support
|
|
|
|
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
|
|
#options CPURESET_DELAY=2000
|
|
|
|
|
|
|
|
# This option allows you to force a serial console at the specified
|
|
|
|
# I/O address. see console(4) for details.
|
|
|
|
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
|
|
|
|
# you don't want the option below ON iff you are using the
|
|
|
|
# serial console option of the new boot strap code.
|
|
|
|
#options CONS_OVERRIDE # Always use above! independent of boot info
|
|
|
|
|
|
|
|
# The following options override the memory sizes passed in from the boot
|
|
|
|
# block. Use them *only* if the boot block is unable to determine the correct
|
|
|
|
# values. Note that the BIOS may *correctly* report less than 640k of base
|
|
|
|
# memory if the extended BIOS data area is located at the top of base memory
|
|
|
|
# (as is the case on most recent systems).
|
|
|
|
#options REALBASEMEM=639 # size of base memory (in KB)
|
|
|
|
#options REALEXTMEM=15360 # size of extended memory (in KB)
|
|
|
|
|
|
|
|
# Standard system options
|
|
|
|
|
|
|
|
options UCONSOLE # users can use TIOCCONS (for xconsole)
|
|
|
|
options INSECURE # disable kernel security levels - X needs this
|
|
|
|
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
|
|
options SYSTRACE # system call vetting via systrace(1)
|
|
|
|
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
|
|
options SYSVSEM # System V-like semaphores
|
|
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
|
|
options SYSVSHM # System V-like memory sharing
|
|
|
|
#options SHMMAXPGS=2048 # 2048 pages is the default
|
|
|
|
|
|
|
|
#options LKM # loadable kernel modules
|
|
|
|
|
|
|
|
options USERCONF # userconf(4) support
|
|
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
|
|
#options NEW_BUFQ_STRATEGY
|
|
|
|
|
|
|
|
# Diagnostic/debugging support options
|
|
|
|
#options DIAGNOSTIC # expensive kernel consistency checks
|
|
|
|
#options DEBUG # expensive debugging checks/support
|
|
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
2002-11-30 01:17:12 +03:00
|
|
|
|
|
|
|
#
|
|
|
|
# Because gcc omits the frame pointer for any -O level, the line below
|
|
|
|
# is needed to make backtraces in DDB work.
|
|
|
|
#
|
|
|
|
#makeoptions COPTS="-O -fno-omit-frame-pointer"
|
2002-11-25 04:05:58 +03:00
|
|
|
#options DDB # in-kernel debugger
|
|
|
|
#options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
|
|
#options KGDB # remote debugger
|
|
|
|
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
|
|
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
|
|
|
|
# Compatibility options
|
|
|
|
options COMPAT_15 # NetBSD 1.5,
|
|
|
|
options COMPAT_43 # and 4.3BSD
|
|
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
|
|
|
2002-11-25 04:11:37 +03:00
|
|
|
options COMPAT_NETBSD32
|
|
|
|
options EXEC_ELF32
|
|
|
|
|
2002-11-25 04:05:58 +03:00
|
|
|
# File systems
|
|
|
|
file-system FFS # UFS
|
|
|
|
file-system EXT2FS # second extended file system (linux)
|
|
|
|
file-system LFS # log-structured file system
|
|
|
|
file-system MFS # memory file system
|
|
|
|
file-system NFS # Network File System client
|
|
|
|
file-system NTFS # Windows/NT file system (experimental)
|
|
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
|
|
file-system MSDOSFS # MS-DOS file system
|
|
|
|
file-system FDESC # /dev/fd
|
|
|
|
file-system KERNFS # /kern
|
|
|
|
file-system NULLFS # loopback file system
|
|
|
|
file-system OVERLAY # overlay file system
|
|
|
|
file-system PORTAL # portal filesystem (still experimental)
|
|
|
|
file-system PROCFS # /proc
|
|
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
|
|
file-system UNION # union file system
|
|
|
|
file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
|
|
|
|
# File system options
|
|
|
|
options QUOTA # UFS quotas
|
|
|
|
#options FFS_EI # FFS Endian Independent support
|
|
|
|
options SOFTDEP # FFS soft updates support.
|
|
|
|
options NFSSERVER # Network File System server
|
|
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
|
|
# immutable) behave as system flags.
|
|
|
|
|
|
|
|
# Networking options
|
|
|
|
#options GATEWAY # packet forwarding
|
|
|
|
options INET # IP + ICMP + TCP + UDP
|
|
|
|
options INET6 # IPV6
|
|
|
|
#options IPSEC # IP security
|
|
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
|
|
#options MROUTING # IP multicast routing
|
|
|
|
options NS # XNS
|
|
|
|
#options NSIP # XNS tunneling over IP
|
|
|
|
options ISO,TPIP # OSI
|
|
|
|
#options EON # OSI tunneling over IP
|
|
|
|
options CCITT,LLC,HDLC # X.25
|
|
|
|
options NETATALK # AppleTalk networking protocols
|
|
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
|
|
# Warning, these may compile large string tables into the kernel!
|
|
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
|
|
options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
|
|
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
|
|
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
|
|
options USBVERBOSE # verbose USB device autoconfig messages
|
|
|
|
options I2OVERBOSE # verbose I2O driver messages
|
|
|
|
|
|
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
|
|
|
|
#
|
|
|
|
# wscons options
|
|
|
|
#
|
|
|
|
# builtin terminal emulations
|
|
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
|
|
options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
|
|
# different kernel output - see dev/wscons/wsdisplayvar.h
|
|
|
|
options WS_KERNEL_FG=WSCOL_GREEN
|
|
|
|
#options WS_KERNEL_BG=WSCOL_BLACK
|
|
|
|
# compatibility to other console drivers
|
|
|
|
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
|
|
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
|
|
options WSDISPLAY_COMPAT_USL # VT handling
|
|
|
|
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
|
|
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
|
|
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
|
|
|
|
# allocate a number of virtual screens at autoconfiguration time
|
|
|
|
#options WSDISPLAY_DEFAULTSCREENS=4
|
|
|
|
# use a large software cursor that doesn't blink
|
|
|
|
options PCDISPLAY_SOFTCURSOR
|
|
|
|
# modify the screen type of the console; defaults to "80x25"
|
|
|
|
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
|
|
|
|
# work around a hardware bug that loaded fonts don't work; found on ATI cards
|
|
|
|
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
|
|
|
|
# the following enables some functions to get mouse console support.
|
|
|
|
# if you want a really secure system, it may be better not to enable them,
|
|
|
|
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
|
|
|
|
#options WSDISPLAY_CHARFUNCS # mouse console support
|
|
|
|
# enable VGA raster mode capable of displaying multilingual text on console
|
|
|
|
#options VGA_RASTERCONSOLE
|
|
|
|
|
|
|
|
# Kernel root file system and dump configuration.
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
#config netbsd root on sd0a type ffs
|
|
|
|
#config netbsd root on ? type nfs
|
|
|
|
|
|
|
|
#
|
|
|
|
# Device configuration
|
|
|
|
#
|
|
|
|
|
|
|
|
mainbus0 at root
|
|
|
|
|
|
|
|
#apm0 at mainbus0 # Advanced power management
|
|
|
|
|
|
|
|
# Tuning for power management, see apm(4) for more details.
|
|
|
|
#options APM_NO_IDLE # Don't call BIOS CPU idle function
|
|
|
|
#options APM_V10_ONLY # Use only the APM 1.0 calls
|
|
|
|
#options APM_NO_POWEROFF # Don't power off on halt(8)
|
|
|
|
#options APM_POWER_PRINT # Print stats on the console
|
|
|
|
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
|
|
|
|
|
|
|
|
|
|
|
|
# Basic Bus Support
|
|
|
|
|
|
|
|
# PCI bus support
|
|
|
|
pci* at mainbus? bus ?
|
|
|
|
pci* at pchb? bus ?
|
|
|
|
pci* at ppb? bus ?
|
|
|
|
|
|
|
|
# PCI bridges
|
|
|
|
pchb* at pci? dev ? function ? # PCI-Host bridges
|
|
|
|
pcib* at pci? dev ? function ? # PCI-ISA bridges
|
|
|
|
ppb* at pci? dev ? function ? # PCI-PCI bridges
|
|
|
|
# XXX 'puc's aren't really bridges, but there's no better place for them here
|
|
|
|
puc* at pci? dev ? function ? # PCI "universal" comm. cards
|
|
|
|
|
|
|
|
#agp* at pchb?
|
|
|
|
|
|
|
|
#
|
|
|
|
|
|
|
|
# ISA bus support
|
|
|
|
isa0 at mainbus?
|
|
|
|
isa0 at pcib?
|
|
|
|
|
|
|
|
# CardBus bridge support
|
|
|
|
#cbb* at pci? dev ? function ?
|
|
|
|
#cardslot* at cbb?
|
|
|
|
|
|
|
|
# CardBus bus support
|
|
|
|
#cardbus* at cardslot?
|
|
|
|
#pcmcia* at cardslot?
|
|
|
|
|
|
|
|
# Coprocessor Support
|
|
|
|
|
|
|
|
# Console Devices
|
|
|
|
|
|
|
|
# wscons
|
|
|
|
pckbc0 at isa? # pc keyboard controller
|
|
|
|
pckbd* at pckbc? # PC keyboard
|
|
|
|
pms* at pckbc? # PS/2 mouse for wsmouse
|
|
|
|
#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
|
|
|
|
vga* at pci? dev ? function ?
|
|
|
|
wsdisplay* at vga? console ?
|
|
|
|
wskbd* at pckbd? console ?
|
|
|
|
wsmouse* at pms? mux 0
|
|
|
|
|
|
|
|
pcppi0 at isa?
|
|
|
|
sysbeep0 at pcppi?
|
|
|
|
|
|
|
|
# Serial Devices
|
|
|
|
|
|
|
|
# PCI serial interfaces
|
|
|
|
com* at puc? port ? # 16x50s on "universal" comm boards
|
|
|
|
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
|
|
|
|
cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
|
|
|
|
|
|
|
|
# PCMCIA serial interfaces
|
|
|
|
#com* at pcmcia? function ? # Modems and serial cards
|
|
|
|
|
|
|
|
#pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
|
|
|
|
#com* at pcmcom? slave ? # ...and the slave devices
|
|
|
|
|
|
|
|
# CardBus serial interfaces
|
|
|
|
#com* at cardbus? dev ? function ? # Modems and serial cards
|
|
|
|
|
|
|
|
# ISA serial interfaces
|
|
|
|
#options COM_HAYESP # adds Hayes ESP serial board support
|
|
|
|
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
|
|
com1 at isa? port 0x2f8 irq 3
|
|
|
|
|
|
|
|
# Parallel Printer Interfaces
|
|
|
|
|
|
|
|
# PCI parallel printer interfaces
|
|
|
|
lpt* at puc? port ? # || ports on "universal" comm boards
|
|
|
|
|
|
|
|
# ISA parallel printer interfaces
|
|
|
|
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
|
|
|
|
lpt1 at isa? port 0x278
|
|
|
|
|
|
|
|
# Hardware monitors
|
|
|
|
|
|
|
|
# LM7[89] and compatible hardware monitors
|
|
|
|
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
|
|
|
|
|
|
|
|
# I2O devices
|
|
|
|
iop* at pci? dev ? function ? # I/O processor
|
|
|
|
iopsp* at iop? tid ? # SCSI/FC-AL ports
|
|
|
|
ld* at iop? tid ? # block devices
|
|
|
|
# XXX dpti.c wants a processor type that is not assigned for x86-64
|
|
|
|
#dpti* at iop? tid 0 # DPT/Adaptec control interface
|
|
|
|
|
|
|
|
|
|
|
|
# SCSI Controllers and Devices
|
|
|
|
|
|
|
|
# PCI SCSI controllers
|
|
|
|
adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
|
|
|
|
adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
|
|
|
|
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
|
|
|
|
bha* at pci? dev ? function ? # BusLogic 9xx SCSI
|
|
|
|
dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
|
|
|
|
iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
|
|
|
|
isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
|
|
|
|
mly* at pci? dev ? function ? # Mylex AcceleRAID and eXtremeRAID
|
|
|
|
pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
|
|
|
|
siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
|
|
|
|
#options SIOP_SYMLED # drive the act. LED in software
|
|
|
|
trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI
|
|
|
|
|
|
|
|
# PCMCIA SCSI controllers
|
|
|
|
#aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
|
|
|
|
#esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
|
|
|
|
|
|
|
|
# CardBus SCSI cards
|
|
|
|
#adv* at cardbus? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
|
|
|
|
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
|
|
|
|
|
|
|
|
# SCSI bus support
|
|
|
|
scsibus* at scsi?
|
|
|
|
|
|
|
|
# SCSI devices
|
|
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
|
|
st* at scsibus? target ? lun ? # SCSI tape drives
|
|
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
|
|
ch* at scsibus? target ? lun ? # SCSI autochangers
|
|
|
|
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
|
|
|
|
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
|
|
uk* at scsibus? target ? lun ? # SCSI unknown
|
|
|
|
|
|
|
|
|
|
|
|
# RAID controllers and devices
|
2002-11-26 06:27:49 +03:00
|
|
|
#aac* at pci? dev ? function ? # Broken -- 32bit assumptions.
|
2002-11-25 04:05:58 +03:00
|
|
|
cac* at pci? dev ? function ? # Compaq PCI array controllers
|
|
|
|
icp* at pci? dev ? function ? # ICP-Vortex GDT & Intel RAID
|
|
|
|
mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family
|
|
|
|
twe* at pci? dev ? function ? # 3ware Escalade RAID controllers
|
|
|
|
|
|
|
|
ld* at cac? unit ?
|
|
|
|
ld* at icp? unit ?
|
|
|
|
ld* at twe? unit ?
|
|
|
|
ld* at mlx? unit ?
|
|
|
|
|
|
|
|
icpsp* at icp? unit ? # SCSI pass-through
|
|
|
|
|
|
|
|
# IDE and related devices
|
|
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
|
|
# a machine hang with some controllers.
|
|
|
|
pciide* at pci? dev ? function ? flags 0x0000
|
|
|
|
|
|
|
|
# PCMCIA IDE controllers
|
|
|
|
#wdc* at pcmcia? function ?
|
|
|
|
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
|
|
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
|
|
wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
|
|
|
|
|
|
# IDE drives
|
|
|
|
# Flags are used only with controllers that support DMA operations
|
|
|
|
# and mode settings (e.g. some pciide controllers)
|
|
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
|
|
wd* at wdc? channel ? drive ? flags 0x0000
|
|
|
|
wd* at pciide? channel ? drive ? flags 0x0000
|
|
|
|
|
|
|
|
# ATAPI bus support
|
|
|
|
atapibus* at atapi?
|
|
|
|
|
|
|
|
# ATAPI devices
|
|
|
|
# flags have the same meaning as for IDE drives.
|
|
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
|
|
st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
|
|
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
|
|
|
|
|
|
|
|
# Miscellaneous mass storage devices
|
|
|
|
|
|
|
|
# ISA floppy
|
|
|
|
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
|
|
|
|
#fdc1 at isa? port 0x370 irq ? drq ?
|
|
|
|
fd* at fdc? drive ? # the drives themselves
|
|
|
|
# some machines need you to do this instead of fd*
|
|
|
|
#fd0 at fdc0 drive 0
|
|
|
|
|
|
|
|
# Network Interfaces
|
|
|
|
|
|
|
|
# PCI network interfaces
|
|
|
|
an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11)
|
|
|
|
bge* at pci? dev ? function ? # Broadcom 570x gigabit Ethernet
|
|
|
|
en* at pci? dev ? function ? # ENI/Adaptec ATM
|
|
|
|
ep* at pci? dev ? function ? # 3Com 3c59x
|
|
|
|
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
|
|
|
|
esh* at pci? dev ? function ? # Essential HIPPI card
|
|
|
|
ex* at pci? dev ? function ? # 3Com 90x[BC]
|
|
|
|
fpa* at pci? dev ? function ? # DEC DEFPA FDDI
|
|
|
|
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
|
|
|
|
gsip* at pci? dev ? function ? # NS83820 Gigabit Ethernet
|
|
|
|
#hme* at pci? dev ? function ? # Sun Microelectronics STP2002-STQ
|
|
|
|
le* at pci? dev ? function ? # PCnet-PCI Ethernet
|
|
|
|
lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
|
|
|
|
mtd* at pci? dev ? function ? # Myson MTD803 3-in-1 Ethernet
|
|
|
|
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
|
|
|
|
ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
|
|
|
|
pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
|
|
|
|
rtk* at pci? dev ? function ? # Realtek 8129/8139
|
|
|
|
sf* at pci? dev ? function ? # Adaptec AIC-6915 Ethernet
|
|
|
|
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
|
|
|
|
ste* at pci? dev ? function ? # Sundance ST-201 Ethernet
|
|
|
|
stge* at pci? dev ? function ? # Sundance/Tamarack TC9021 Gigabit
|
|
|
|
ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
|
|
|
|
tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
|
|
|
|
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
|
|
|
vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
|
|
|
|
wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b)
|
|
|
|
wm* at pci? dev ? function ? # Intel 82543/82544 gigabit
|
|
|
|
|
|
|
|
# PCMCIA network interfaces
|
|
|
|
#an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
|
|
|
|
#awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
|
|
|
|
#cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
|
|
|
|
#ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
|
|
|
|
#mbe* at pcmcia? function ? # MB8696x based Ethernet
|
|
|
|
#ne* at pcmcia? function ? # NE2000-compatible Ethernet
|
|
|
|
#ray* at pcmcia? function ? # Raytheon Raylink (802.11)
|
|
|
|
#sm* at pcmcia? function ? # Megahertz Ethernet
|
|
|
|
# tr at pcmcia has problems with Cardbus bridges
|
|
|
|
#tr* at pcmcia? function ? # TROPIC based Token-Ring
|
|
|
|
#wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
|
|
|
|
#xi* at pcmcia? function ? # Xircom CreditCard Ethernet
|
|
|
|
|
|
|
|
#mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
|
|
|
|
#com* at mhzc?
|
|
|
|
#sm* at mhzc?
|
|
|
|
|
|
|
|
# CardBus network cards
|
|
|
|
#ex* at cardbus? dev ? function ? # 3Com 3C575TX
|
|
|
|
#fxp* at cardbus? dev ? function ? # Intel i8255x
|
|
|
|
#rtk* at cardbus? dev ? function ? # Realtek 8129/8139
|
|
|
|
#tlp* at cardbus? dev ? function ? # DECchip 21143
|
|
|
|
|
|
|
|
# MII/PHY support
|
|
|
|
acphy* at mii? phy ? # DAltima AC101 and AMD Am79c874 PHYs
|
|
|
|
amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
|
|
|
|
bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
|
|
|
|
brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
|
|
|
|
dmphy* at mii? phy ? # Davicom DM9101 PHYs
|
|
|
|
exphy* at mii? phy ? # 3Com internal PHYs
|
|
|
|
glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
|
|
|
|
gphyter* at mii? phy ? # NS83861 Gig-E PHY
|
|
|
|
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
|
|
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
|
|
iophy* at mii? phy ? # Intel 82553 PHYs
|
|
|
|
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
|
|
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
|
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
|
|
pnaphy* at mii? phy ? # generic HomePNA PHYs
|
|
|
|
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
|
|
|
|
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
|
|
tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
|
|
tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
|
|
|
|
|
|
|
|
|
|
|
|
# USB Controller and Devices
|
|
|
|
|
|
|
|
# PCI USB controllers
|
|
|
|
# The EHCI is not ready for prime time.
|
|
|
|
#ehci* at pci? dev ? function ? # Enhanced Host Controller
|
|
|
|
ohci* at pci? dev ? function ? # Open Host Controller
|
|
|
|
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
|
|
|
|
|
|
|
|
# CardBus USB controllers
|
|
|
|
#ehci* at cardbus? dev ? function ? # Enhanced Host Controller
|
|
|
|
#ohci* at cardbus? dev ? function ? # Open Host Controller
|
|
|
|
|
|
|
|
# ISA USB controllers
|
|
|
|
#slhci0 at isa? port 0x300 irq 5 # ScanLogic SL811HS
|
|
|
|
|
|
|
|
# USB bus support
|
|
|
|
#usb* at ehci?
|
|
|
|
usb* at ohci?
|
|
|
|
usb* at uhci?
|
|
|
|
#usb* at slhci?
|
|
|
|
|
|
|
|
# USB Hubs
|
|
|
|
uhub* at usb?
|
|
|
|
uhub* at uhub? port ? configuration ? interface ?
|
|
|
|
|
|
|
|
# USB HID device
|
|
|
|
uhidev* at uhub? port ? configuration ? interface ?
|
|
|
|
|
|
|
|
# USB Mice
|
|
|
|
ums* at uhidev? reportid ?
|
|
|
|
wsmouse* at ums? mux 0
|
|
|
|
|
|
|
|
# USB Keyboards
|
|
|
|
ukbd* at uhidev? reportid ?
|
|
|
|
wskbd* at ukbd? console ? mux 1
|
|
|
|
|
|
|
|
# USB Generic HID devices
|
|
|
|
uhid* at uhidev? reportid ?
|
|
|
|
|
|
|
|
# USB Printer
|
|
|
|
ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
|
|
|
|
# USB Modem
|
|
|
|
umodem* at uhub? port ? configuration ?
|
|
|
|
ucom* at umodem?
|
|
|
|
|
|
|
|
# USB Mass Storage
|
|
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
|
|
#wd* at umass?
|
|
|
|
|
|
|
|
# USB audio
|
|
|
|
uaudio* at uhub? port ? configuration ?
|
|
|
|
|
|
|
|
# USB MIDI
|
|
|
|
umidi* at uhub? port ? configuration ?
|
|
|
|
|
|
|
|
# USB IrDA
|
|
|
|
# USB-IrDA bridge spec
|
|
|
|
uirda* at uhub? port ? configuration ? interface ?
|
|
|
|
irframe* at uirda?
|
|
|
|
|
|
|
|
# SigmaTel STIr4200 USB/IrDA Bridge
|
|
|
|
ustir* at uhub? port ?
|
|
|
|
irframe* at ustir?
|
|
|
|
|
|
|
|
# USB Ethernet adapters
|
|
|
|
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
|
|
|
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
|
|
|
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
2003-02-16 20:35:13 +03:00
|
|
|
uax* at uhub? port ? # ASIX AX88172 based adapters
|
2002-11-25 04:05:58 +03:00
|
|
|
url* at uhub? port ? # Realtek RTL8150L based adapters
|
|
|
|
|
|
|
|
# Prolific PL2301/PL2302 host-to-host adapter
|
|
|
|
upl* at uhub? port ?
|
|
|
|
|
|
|
|
# Serial adapters
|
|
|
|
ubsa* at uhub? port ? # Belkin serial adapter
|
|
|
|
ucom* at ubsa? portno ?
|
|
|
|
|
|
|
|
uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
|
|
|
|
ucom* at uftdi? portno ?
|
|
|
|
|
|
|
|
umct* at uhub? port ? # MCT USB-RS232 serial adapter
|
|
|
|
ucom* at umct? portno ?
|
|
|
|
|
|
|
|
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
|
|
|
ucom* at uplcom? portno ?
|
|
|
|
|
|
|
|
uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
|
|
|
|
ucom* at uvscom? portno ?
|
|
|
|
|
|
|
|
# Diamond Multimedia Rio 500
|
|
|
|
urio* at uhub? port ?
|
|
|
|
|
|
|
|
# USB Handspring Visor
|
|
|
|
uvisor* at uhub? port ?
|
|
|
|
ucom* at uvisor?
|
|
|
|
|
|
|
|
# USB scanners
|
|
|
|
uscanner* at uhub? port ?
|
|
|
|
|
|
|
|
# USB scanners that use SCSI emulation, e.g., HP5300
|
|
|
|
usscanner* at uhub? port ?
|
|
|
|
|
|
|
|
# Y@P firmware loader
|
|
|
|
uyap* at uhub? port ?
|
|
|
|
|
|
|
|
# D-Link DSB-R100 USB radio
|
|
|
|
udsbr* at uhub? port ?
|
|
|
|
radio* at udsbr?
|
|
|
|
|
|
|
|
# USB Generic driver
|
|
|
|
ugen* at uhub? port ?
|
|
|
|
|
|
|
|
|
|
|
|
# IrDA and Consumer Ir devices
|
|
|
|
|
|
|
|
# Toshiba Oboe
|
2002-11-26 06:27:49 +03:00
|
|
|
#oboe* at pci? dev ? function ? # broken -- vtophys
|
|
|
|
#irframe* at oboe?
|
2002-11-25 04:05:58 +03:00
|
|
|
|
|
|
|
|
|
|
|
# Audio Devices
|
|
|
|
|
|
|
|
# PCI audio devices
|
|
|
|
auich* at pci? dev ? function ? # AMD 8111 audio
|
|
|
|
autri* at pci? dev ? function ? # Trident 4DWAVE based AC'97 Audio
|
|
|
|
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
|
|
|
|
clct* at pci? dev ? function ? # Cirrus Logic CS4281
|
|
|
|
cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
|
|
|
|
eap* at pci? dev ? function ? # Ensoniq AudioPCI
|
|
|
|
emuxki* at pci? dev ? function ? # Creative SBLive! and PCI512
|
|
|
|
esa* at pci? dev ? function ? # ESS Allegro-1 / Maestro-3 PCI Audio
|
|
|
|
esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator
|
|
|
|
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
|
|
|
|
fms* at pci? dev ? function ? # Forte Media FM801
|
|
|
|
neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
|
|
|
|
sv* at pci? dev ? function ? # S3 SonicVibes
|
|
|
|
yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
|
|
|
|
|
|
|
|
# PCMCIA audio devices
|
|
|
|
#esl* at pcmcia? function ? # ESS 1688 AudioDrive
|
|
|
|
|
|
|
|
# OPL[23] FM synthesizers
|
|
|
|
#opl0 at isa? port 0x388 # use only if not attached to sound card
|
|
|
|
opl* at cmpci? flags 1
|
|
|
|
#opl* at esl?
|
|
|
|
opl* at eso?
|
|
|
|
opl* at fms?
|
|
|
|
opl* at sv?
|
|
|
|
|
|
|
|
# Audio support
|
|
|
|
audio* at audiobus?
|
|
|
|
|
|
|
|
# MPU 401 UARTs
|
|
|
|
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
|
|
|
|
mpu* at cmpci?
|
|
|
|
mpu* at eso?
|
|
|
|
mpu* at yds?
|
|
|
|
|
|
|
|
# MIDI support
|
|
|
|
midi* at midibus?
|
|
|
|
midi* at pcppi? # MIDI interface to the PC speaker
|
|
|
|
|
|
|
|
# The spkr driver provides a simple tone interface to the built in speaker.
|
|
|
|
#spkr0 at pcppi? # PC speaker
|
|
|
|
|
|
|
|
|
|
|
|
# FM-Radio devices
|
|
|
|
# PCI radio devices
|
|
|
|
#gtp* at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio Card
|
|
|
|
|
|
|
|
# Radio support
|
|
|
|
#radio* at gtp?
|
|
|
|
|
|
|
|
|
|
|
|
# TV cards
|
|
|
|
|
|
|
|
# Brooktree 848/849/878/879 based TV cards
|
|
|
|
bktr* at pci? dev ? function ?
|
|
|
|
radio* at bktr?
|
|
|
|
|
|
|
|
|
|
|
|
# Mice
|
|
|
|
|
|
|
|
# Middle Digital, Inc. PCI-Weasel serial console board control
|
|
|
|
# devices (watchdog timer, etc.)
|
|
|
|
weasel* at pci?
|
|
|
|
|
|
|
|
# Pull in optional local configuration
|
|
|
|
include "arch/x86_64/conf/GENERIC.local"
|
|
|
|
|
|
|
|
# Pseudo-Devices
|
|
|
|
|
|
|
|
# disk/mass storage pseudo-devices
|
|
|
|
pseudo-device ccd 4 # concatenated/striped disk devices
|
|
|
|
#pseudo-device cgd 4 # cryptographic disk devices
|
|
|
|
pseudo-device raid 8 # RAIDframe disk driver
|
|
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
|
|
#Options to enable various other RAIDframe RAID types.
|
|
|
|
#options RF_INCLUDE_EVENODD=1
|
|
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
|
|
|
|
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
|
|
|
|
# network pseudo-devices
|
|
|
|
pseudo-device bpfilter 8 # Berkeley packet filter
|
|
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
|
|
pseudo-device loop # network loopback
|
|
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
|
|
pseudo-device sl 2 # Serial Line IP
|
|
|
|
pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
|
|
pseudo-device irframetty # IrDA frame line discipline
|
|
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
|
|
pseudo-device gre 2 # generic L3 over IP tunnel
|
|
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
|
|
pseudo-device bridge # simple inter-network bridging
|
2003-02-27 22:22:36 +03:00
|
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
2002-11-25 04:05:58 +03:00
|
|
|
|
|
|
|
# miscellaneous pseudo-devices
|
|
|
|
pseudo-device pty # pseudo-terminals
|
|
|
|
pseudo-device tb 1 # tablet line discipline
|
|
|
|
pseudo-device sequencer 1 # MIDI sequencer
|
|
|
|
# rnd works; RND_COM does not on port i386 yet.
|
|
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
|
|
pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
|
|
|
|
# wscons pseudo-devices
|
|
|
|
pseudo-device wsmux # mouse & keyboard multiplexor
|
|
|
|
pseudo-device wsfont
|