NetBSD/distrib/notes/pc532/install

411 lines
11 KiB
Plaintext
Raw Normal View History

.\" $NetBSD: install,v 1.16 2001/06/11 01:50:50 wiz Exp $
1999-01-13 10:30:01 +03:00
.\"
.\" Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
1999-01-13 10:30:01 +03:00
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the NetBSD
.\" Foundation, Inc. and its contributors.
.\" 4. Neither the name of The NetBSD Foundation nor the names of its
.\" contributors may be used to endorse or promote products derived
.\" from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
.
(If you already have
.Nx*M
installed and you only want to update
1994-10-25 12:08:25 +03:00
your system, see the next section.)
1999-01-13 10:30:01 +03:00
.Pp
To install
.Nx*M ,
there are several things you need to know.
First,
.Nx
.Dq autoconfig 's
the SCSI devices.
1999-01-13 10:30:01 +03:00
.Pa floppy-144.fs
has only
support for disks configured into the kernel. Starting the search at
SCSI address 0, lun 0 and increasing, the first disk found will be
.Li sd0
1999-01-13 10:30:01 +03:00
regardless of the address, the second will be sd1.
.Tn KLONDIKE
for example has the following devices installed:
.Pp
.(tag "sd0xx" -offset indent -compact
.It Li sd0
ID 0 LUN 0: Quantum LP52S hard disk drive
.It Li sd1
ID 1 LUN 0: Micropolis 4110 hard disk drive
.It Li sd2
ID 2 LUN 0: Teac FC-1, 3.5" floppy disk drive
.It Li sd3
ID 2 LUN 1: Teac FC-1, 5.25" floppy disk drive
.It Li cd0
ID 3 LUN 0: Toshiba XM-4101TA CD-ROM drive
.It Li st0
ID 4 LUN 0: Tandberg TDC3600 QIC tape drive
.tag)
1999-01-13 10:30:01 +03:00
.Pp
Only
.Li sd0
-
.Li sd3
are supported by the
1999-01-13 10:30:01 +03:00
.Pa floppy-144.fs
kernel.
.Pp
Next you need to know what the install script wants to do. This install
1994-10-25 12:08:25 +03:00
is script on the ram disk root that can do most of the work of configuring
your disk.
.(enum
1999-01-13 10:30:01 +03:00
The script assumes your are using the first n sectors of your
disk, where you can specify n. It will allow you to create
up to 5 file system partitions, one swap partition and one
boot partition.
.It
You should know how many total sectors are on your disk. The
configure will report a head, track, and cylinder count, but
we have found that on some of our disks, it reports something that
makes a smaller disk than we really had.
1999-01-13 10:30:01 +03:00
.It
It is possible to have the install script make a partition
over your save area AND not make a new file system, thus
preserving what is there. Then, later you can make a new
file system after you no longer need the stuff there. You
will need to do only one boot to get things working from
the disk.
.enum)
.
.Ss2 The install procedure
.(enum
1999-01-13 10:30:01 +03:00
Adjust your console device settings.
The floppy-144.fs kernel will come up with 9600 baud, 7 bits,
even parity and one stop bit. Adjust your terminal to match
these settings. The monitor's baud rate can be changed with
.Ic "baud d'9600" .
1999-01-13 10:30:01 +03:00
.
.It
Get floppy-144.fs and boot the kernel from...
.
.(tag Serial\ line
.It Em Floppy
1999-01-13 10:30:01 +03:00
From Floppy: (and using the autoboot monitor)
If you have a 1.44 meg SCSI floppy drive, you can put floppy-144.fs
onto a 3.5" floppy disk. Insert the disk into your floppy
drive and use the monitor's boot command to boot the default
image from the floppy. The image booted will ask you for a
kernel to load. Answer
.Pp
.Dl Ic "sd" Ns Ar X Ns Ic "a:/netbsd"
.Pp
1999-01-13 10:30:01 +03:00
Replace
.Ar X
1999-01-13 10:30:01 +03:00
with your drive number. For KLONDIKE,
.Ar X
would be
.Ic 2 .
1999-01-13 10:30:01 +03:00
.
.It Em Tape
1999-01-13 10:30:01 +03:00
You will need to load a copy of
.Pa floppy-144.fs
1999-01-13 10:30:01 +03:00
into RAM.
.Pp
.(enum -offset indent -compact
load the
.Pa floppy-144.fs
at
.Li 0x260000
.It
run at
.Li 0x3BE020
.enum)
.Pp
1999-01-13 10:30:01 +03:00
The boot program will ask you now for a kernel to load. Answer
.Li md0a:/netbsd.gz
1999-01-13 10:30:01 +03:00
.
.It Em Serial Line
1999-01-13 10:30:01 +03:00
Provided with the distribution is source for program called
download
.Pq Pa download.c .
This program when used as
.Dq "download file"
will read the contents of the file and
output to standard output a byte sequence used by the \*M
1999-01-13 10:30:01 +03:00
ROM monitor to download a binary file into RAM. Using this
program on a computer connected to the \*M, one can
load a copy of
.Pa floppy-144.fs
into RAM at
.Li 0x260000 .
The boot sequence is now the same as with tape.
.tag)
1999-01-13 10:30:01 +03:00
.It
The
.Pa floppy-144.fs
will run the new
.Ic sysinst
utility as the standard
1999-01-13 10:30:01 +03:00
setup. It assumes a VT100 compatible terminal. If you don't want
to try using
.Ic sysinst
or you don't have a VT100, type f followed by
1999-01-13 10:30:01 +03:00
the return. Then following these instructions for installation.
If you want to use
.Ic sysinst ,
read the i386 INSTALL instructions to
learn about
.Ic sysinst .
.(Note
.Ic sysinst
does not support SLIP or PPP
1999-01-13 10:30:01 +03:00
connections.
.Note)
1999-01-13 10:30:01 +03:00
.It
Choose a disk geometry. For me, the reported geometry left
some sectors
.Sq "unallocated" .
That is, the autoconfig message
1999-01-13 10:30:01 +03:00
said the disk had 2428 cylinders, 9 heads, and 93 sectors/track.
This gives a total of 2032236 sectors, but we knew that we had
1999-01-13 10:30:01 +03:00
2053880 sectors.
.Pp
To help in this process, there is a program
.Ic factor
that is on the
.Pa floppy-144.fs .
The usage is
.Ic "factor number"
and it lists the prime factors of number.
For example, with the 2053880 sector disk we got:
.Pp
.Dl $ Ic "factor 2053880"
1999-01-13 10:30:01 +03:00
.Dl 2053880: 2 2 2 5 51347
.Pp
Not many to choose from, so we tried ...
.Pp
.Dl $ Ic "factor 2053820"
1999-01-13 10:30:01 +03:00
.Dl 2053820: 2 2 5 103 997
.Pp
Now we'd like to get about a megabyte per track:
.Pp
.Dl $ Ic "echo \&"2 * 997\&"|bc"
1999-01-13 10:30:01 +03:00
.Dl 1994
.Pp
Now we need the number of tracks (or cylinders):
.Pp
.Dl $ Ic "echo \&"2 * 5 * 103\&"|bc"
1999-01-13 10:30:01 +03:00
.Dl 1030
.Pp
So we ended up choosing 1030 cylinders, 1 head, 1994 sectors/track.
We
.Dq lost
only 60 sectors, but got a
.Dq reasonable
geometry.
1999-01-13 10:30:01 +03:00
.It
Run
.Ic install ;
it will ask you for the disk geometry and other
1999-01-13 10:30:01 +03:00
questions. It will ask you for the geometry and then ask you
how many of those sectors you want to use for
.Nx .
It also
1999-01-13 10:30:01 +03:00
wants to know the size of your boot partition (to be used with
the auto-boot monitor), your root partition
.Pq Pa / ,
your swap partition,
and then any other partitions you may want. For the
.Sq other
1999-01-13 10:30:01 +03:00
partitions, it will ask for a mount point. The mount point will
be
.Dq "relative to /"
and should not include the leading
.Sq / .
Also, if you do not want the partition to have newfs run on it (that is
it might be the last one and have a copy of
.Pa floppy-144.fs )
enter
.Sq Ic NO
to the mount point and it will not run
.Ic newfs
on the partition.
1999-01-13 10:30:01 +03:00
It will enter the partition into the disklabel.
.It
look around, if you want ... and then halt
.Nx .
1999-01-13 10:30:01 +03:00
.It
reboot the machine. Using the autoboot monitor, all you should have
to do is give the ROM monitor command
.Ic boot .
The secondary
UFS boot program eventually times out and auto-loads
.Pa /netbsd .
You can get it to do it faster by pressing return.
1999-01-13 10:30:01 +03:00
.Pp
If you are not using the autoboot monitor, you will have to
figure out the starting sector of the boot images partition
and manually load the
.Nx
boot loader from the disk using
the
.Ic read
command. If you would rather use the autoboot monitor
1999-01-13 10:30:01 +03:00
you can get source and ROM images from the URL
.Lk ftp://ftp.cs.wwu.edu/pub/\*M/mon.auto.tar.gz
1999-01-13 10:30:01 +03:00
.It
Now it is time to load all the other files of the distribution:
You can do this via -
.(bullet
1999-01-13 10:30:01 +03:00
a TCP/IP link (slip, ppp or plip)
you have ifconfig, slattach, route, netstat,
hostname and ftp on the mini-root. You can even
use nfs...
Plip is only an option if you have installed a
centronics port in your \*M.
1999-01-13 10:30:01 +03:00
You do have access to vi to edit your network
files.
.Pq Pa /etc/resolv.conf , ...
1999-01-13 10:30:01 +03:00
.It
floppy disk
.It
tape
.It
cd-rom (If you have a CD with
.Nx*M ,
which most likely
1999-01-13 10:30:01 +03:00
won't happen for a while after \*V release.)
.Pp
.Dl Ic "mount -rt cd9660 /dev/cd0a /mnt"
.Pp
1999-01-13 10:30:01 +03:00
Get the .tgz files from the cd-rom
.It
Use the ROM compatible
.Ic download
program. The program
1999-01-13 10:30:01 +03:00
download is included in the initial installation and
can be used as the receive end of the download by
using it as
.Ic "download -r file_to_write" .
If the CRC is correct, the file is retained. If the CRC is not
1999-01-13 10:30:01 +03:00
correct, the file is deleted.
.bullet)
1999-01-13 10:30:01 +03:00
.It
Load the .tgz files. Choose a place to put them. We suggest making
a directory
.Pa /gz.files
and put them there. If you are
.Dq short on space,
you might want to load them and extract them one
at a time. A minimum installation is
.Sy base
and
.Sy etc .
It takes about 32 Megs installed + 20 Megs for the
.Pa base.tgz .
1999-01-13 10:30:01 +03:00
.It
Extract the tar files in
.Pa / .
For example, if your
.Pa *.tgz
files were in a directory
.Pa /gz.files ,
to extract
.Pa base.tgz
you would:
.Pp
.Dl Ic "cd /"
.Dl Ic "tar --unlink -zxpf /gz.files/base.tgz"
1999-01-13 10:30:01 +03:00
.Pp
Add v to the flags if you want a verbose extract.
The
.Ic --unlink
is to make sure that the install versions
of sh, init, ... are replaced by their proper versons
in base.tgz. We think it is wise to include the
1999-01-13 10:30:01 +03:00
.Ic --unlink
for other things.
.It
Extract at least
.Sy base ,
.Sy etc
and
.Sy kern
for a new installation.
For
.Dq update
extracts, move
.Pa /etc
to
.Pa /etc.old
and then extract
.Sy etc .
You should extract
.Sy etc
for upgrades. For
.Dq full
installations, extract all files.
1999-01-13 10:30:01 +03:00
.It
Edit the information in
.Pa /etc
.(tag resolv.conf
.It Pa rc.conf
1999-01-13 10:30:01 +03:00
Many things can be configured here
.It Pa hosts
1999-01-13 10:30:01 +03:00
host name and address information
.It Pa resolv.conf
1999-01-13 10:30:01 +03:00
which nameserver to use
.It Pa ttys
1999-01-13 10:30:01 +03:00
make sure the console entry has the correct speed
.It Pa gettytab
You may find that
.Dq ap
instead of
.Dq ep
in the default entry works better for you.
.It Pa fstab
1999-01-13 10:30:01 +03:00
make sure it includes all partitions you want mounted
.tag)
1999-01-13 10:30:01 +03:00
.Pp
Now you can adjust the kernel's default baud rate to match your
monitor's default baud rate. Do the following:
.Pp
.Dl # Ic "gdb -w /netbsd"
.Dl (gdb) Ic "set scndefaultrate = " Em your_baud_rate
.Dl (gdb) Ic quit
.Pp
1999-01-13 10:30:01 +03:00
where
.Ar your_baud_rate No is the actual value, 19200, 38400 or
something slower than 9600.
If you set scndefaultrate to something bogus, you'll probably
not be able to reboot... So be carefull!
.It
Reboot the machine and it should come up in multi-user mode
.Em if
1999-01-13 10:30:01 +03:00
you got it configured correctly.
.It
Enjoy! And help fix bugs and improve
.Nx*M !
.enum)