Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/ufs/lfs/lfs_bio.c

584 lines
16 KiB
C
Raw Normal View History

Remove some variables that are set but never used.
2001-11-06 10:11:29 +03:00
/* $NetBSD: lfs_bio.c,v 1.38 2001/11/06 07:11:29 simonb Exp $ */
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 10:39:25 +04:00
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
/*-
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
* Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Konrad E. Schroder <perseant@hhhh.org>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/*
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Merge with Lite2 + local changes
1998-03-01 05:20:01 +03:00
* @(#)lfs_bio.c 8.10 (Berkeley) 6/10/95
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
*/
#include <sys/param.h>
lfs prototypes
1996-02-10 01:28:45 +03:00
#include <sys/systm.h>
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/vnode.h>
#include <sys/resourcevar.h>
#include <sys/mount.h>
#include <sys/kernel.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufsmount.h>
lfs prototypes
1996-02-10 01:28:45 +03:00
#include <ufs/ufs/ufs_extern.h>
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
#include <sys/malloc.h>
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
#include <ufs/lfs/lfs.h>
#include <ufs/lfs/lfs_extern.h>
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
/* Macros to clear/set/test flags. */
# define SET(t, f) (t) |= (f)
# define CLR(t, f) (t) &= ~(f)
# define ISSET(t, f) ((t) & (f))
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/*
* LFS block write function.
*
* XXX
* No write cost accounting is done.
* This is almost certainly wrong for synchronous operations and NFS.
*/
int lfs_allclean_wakeup; /* Cleaner wakeup address. */
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
int locked_queue_count = 0; /* XXX Count of locked-down buffers. */
long locked_queue_bytes = 0L; /* XXX Total size of locked buffers. */
int lfs_writing = 0; /* Set if already kicked off a writer
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
because of buffer space */
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
extern int lfs_dostats;
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
/*
* Try to reserve some blocks, prior to performing a sensitive operation that
* requires the vnode lock to be honored. If there is not enough space, give
* up the vnode lock temporarily and wait for the space to become available.
*
* Called with vp locked. (Note nowever that if nb < 0, vp is ignored.)
*/
int
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_reserve(struct lfs *fs, struct vnode *vp, int nb)
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
{
CLEANERINFO *cip;
struct buf *bp;
int error, slept;
slept = 0;
while (nb > 0 && !lfs_fits(fs, nb + fs->lfs_ravail)) {
VOP_UNLOCK(vp, 0);
Cast back to int32_t in LFS_EST_BFREE and LFS_EST_RSVD macros, for consistency with their arguments. Change the debugging printf in lfs_reserve to match, and enclose it in #ifdef DEBUG. Tested on alpha, arm32, sparc.
2000-09-13 04:07:56 +04:00
if (!slept) {
#ifdef DEBUG
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
printf("lfs_reserve: waiting for %ld (bfree = %d,"
Cast back to int32_t in LFS_EST_BFREE and LFS_EST_RSVD macros, for consistency with their arguments. Change the debugging printf in lfs_reserve to match, and enclose it in #ifdef DEBUG. Tested on alpha, arm32, sparc.
2000-09-13 04:07:56 +04:00
" est_bfree = %d)\n",
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
nb + fs->lfs_ravail, fs->lfs_bfree,
Cast back to int32_t in LFS_EST_BFREE and LFS_EST_RSVD macros, for consistency with their arguments. Change the debugging printf in lfs_reserve to match, and enclose it in #ifdef DEBUG. Tested on alpha, arm32, sparc.
2000-09-13 04:07:56 +04:00
LFS_EST_BFREE(fs));
#endif
}
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
++slept;
/* Wake up the cleaner */
LFS_CLEANERINFO(cip, fs, bp);
Do not needlessly dirty segment table blocks during lfs_segwrite, preventing needless disk activity when the filesystem is idle. (PR #10979.)
2000-11-12 10:58:36 +03:00
LFS_SYNC_CLEANERINFO(cip, fs, bp, 0);
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
wakeup(&lfs_allclean_wakeup);
wakeup(&fs->lfs_nextseg);
error = tsleep(&fs->lfs_avail, PCATCH | PUSER, "lfs_reserve",
0);
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY); /* XXX use lockstatus */
if (error)
return error;
}
if (slept)
printf("lfs_reserve: woke up\n");
fs->lfs_ravail += nb;
return 0;
}
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/*
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
*
* XXX we don't let meta-data writes run out of space because they can
* come from the segment writer. We need to make sure that there is
* enough space reserved so that there's room to write meta-data
* blocks.
*
* Also, we don't let blocks that have come to us from the cleaner
* run out of space.
*/
#define CANT_WAIT(BP,F) (IS_IFILE((BP)) || (BP)->b_lblkno<0 || ((F) & BW_CLEAN))
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
int
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_bwrite(void *v)
lfs prototypes
1996-02-10 01:28:45 +03:00
{
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
struct vop_bwrite_args /* {
struct buf *a_bp;
lfs prototypes
1996-02-10 01:28:45 +03:00
} */ *ap = v;
Remove register declarations.
2000-03-30 16:41:09 +04:00
struct buf *bp = ap->a_bp;
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
#ifdef DIAGNOSTIC
Protect inode free list with seglock, instead of separate lock, so that the head of the inode free list (on the superblock) always matches the rest of the free list (in the ifile). Protect lfs_fragextend with seglock, to prevent the segment byte count fudging from making its way to disk. Don't try to inactivate dirop vnodes that are still in the middle of their dirop (may address PR#10285).
2000-06-07 00:19:14 +04:00
if (VTOI(bp->b_vp)->i_lfs->lfs_ronly == 0 && (bp->b_flags & B_ASYNC)) {
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
panic("bawrite LFS buffer");
In lfs_bwrite, don't mark buffers dirty if lfs is mounted read-only. (Previously buffers could be marked dirty by the cleaner, and possibly by other means.) Also check for softdep mount in vfs_shutdown before trying to bawrite buffers, since other filesystems don't need it and lfs doesn't bawrite. (This fragment reviewed by fvdl.) Partially addresses PR#8964.
1999-12-15 10:10:32 +03:00
}
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
#endif /* DIAGNOSTIC */
return lfs_bwrite_ext(bp,0);
}
/*
* Determine if there is enough room currently available to write db
* disk blocks. We need enough blocks for the new blocks, the current
* inode blocks, a summary block, plus potentially the ifile inode and
* the segment usage table, plus an ifile page.
*/
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
int
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_fits(struct lfs *fs, int fsb)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
Clean up accounting of lfs_uinodes (dirty but unwritten inodes). Make lfs_uinodes a signed quantity for debugging purposes, and set it to zero as fs mount time. Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED, IN_CLEANING) in macros, and use those macros everywhere. Make LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
2000-07-06 02:25:43 +04:00
int needed;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
needed = fsb + btofsb(fs, fs->lfs_sumsize) +
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
fsbtodb(fs, howmany(fs->lfs_uinodes + 1, INOPB(fs)) +
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs->lfs_segtabsz + btofsb(fs, fs->lfs_sumsize));
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
Clean up accounting of lfs_uinodes (dirty but unwritten inodes). Make lfs_uinodes a signed quantity for debugging purposes, and set it to zero as fs mount time. Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED, IN_CLEANING) in macros, and use those macros everywhere. Make LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
2000-07-06 02:25:43 +04:00
if (needed >= fs->lfs_avail) {
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
#ifdef DEBUG
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
printf("lfs_fits: no fit: fsb = %d, uinodes = %d, "
Clean up accounting of lfs_uinodes (dirty but unwritten inodes). Make lfs_uinodes a signed quantity for debugging purposes, and set it to zero as fs mount time. Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED, IN_CLEANING) in macros, and use those macros everywhere. Make LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
2000-07-06 02:25:43 +04:00
"needed = %d, avail = %d\n",
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fsb, fs->lfs_uinodes, needed, fs->lfs_avail);
Clean up accounting of lfs_uinodes (dirty but unwritten inodes). Make lfs_uinodes a signed quantity for debugging purposes, and set it to zero as fs mount time. Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED, IN_CLEANING) in macros, and use those macros everywhere. Make LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
2000-07-06 02:25:43 +04:00
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
return 0;
}
return 1;
}
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
int
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_availwait(struct lfs *fs, int db)
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
{
int error;
CLEANERINFO *cip;
struct buf *cbp;
while (!lfs_fits(fs, db)) {
/*
* Out of space, need cleaner to run.
* Update the cleaner info, then wake it up.
* Note the cleanerinfo block is on the ifile
* so it CANT_WAIT.
*/
LFS_CLEANERINFO(cip, fs, cbp);
LFS_SYNC_CLEANERINFO(cip, fs, cbp, 0);
printf("lfs_availwait: out of available space, "
"waiting on cleaner\n");
wakeup(&lfs_allclean_wakeup);
wakeup(&fs->lfs_nextseg);
#ifdef DIAGNOSTIC
if (fs->lfs_seglock && fs->lfs_lockpid == curproc->p_pid)
panic("lfs_availwait: deadlock");
#endif
error = tsleep(&fs->lfs_avail, PCATCH | PUSER, "cleaner", 0);
if (error)
return (error);
}
return 0;
}
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
int
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_bwrite_ext(struct buf *bp, int flags)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
struct lfs *fs;
struct inode *ip;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
int fsb, error, s;
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
In lfs_bwrite, don't mark buffers dirty if lfs is mounted read-only. (Previously buffers could be marked dirty by the cleaner, and possibly by other means.) Also check for softdep mount in vfs_shutdown before trying to bawrite buffers, since other filesystems don't need it and lfs doesn't bawrite. (This fragment reviewed by fvdl.) Partially addresses PR#8964.
1999-12-15 10:10:32 +03:00
/*
* Don't write *any* blocks if we're mounted read-only.
* In particular the cleaner can't write blocks either.
*/
if(VTOI(bp->b_vp)->i_lfs->lfs_ronly) {
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
bp->b_flags &= ~(B_DELWRI | B_READ | B_ERROR);
LFS_UNLOCK_BUF(bp);
In lfs_bwrite, don't mark buffers dirty if lfs is mounted read-only. (Previously buffers could be marked dirty by the cleaner, and possibly by other means.) Also check for softdep mount in vfs_shutdown before trying to bawrite buffers, since other filesystems don't need it and lfs doesn't bawrite. (This fragment reviewed by fvdl.) Partially addresses PR#8964.
1999-12-15 10:10:32 +03:00
if(bp->b_flags & B_CALL)
bp->b_flags &= ~B_BUSY;
else
brelse(bp);
return EROFS;
}
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/*
* Set the delayed write flag and use reassignbuf to move the buffer
* from the clean list to the dirty one.
*
* Set the B_LOCKED flag and unlock the buffer, causing brelse to move
* the buffer onto the LOCKED free list. This is necessary, otherwise
* getnewbuf() would try to reclaim the buffers using bawrite, which
* isn't going to work.
*
* XXX we don't let meta-data writes run out of space because they can
* come from the segment writer. We need to make sure that there is
* enough space reserved so that there's room to write meta-data
* blocks.
*/
if (!(bp->b_flags & B_LOCKED)) {
fs = VFSTOUFS(bp->b_vp->v_mount)->um_lfs;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fsb = fragstofsb(fs, numfrags(fs, bp->b_bcount));
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
if (!CANT_WAIT(bp, flags)) {
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = lfs_availwait(fs, fsb)) != 0) {
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
brelse(bp);
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
return error;
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
}
}
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
ip = VTOI(bp->b_vp);
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
if (bp->b_flags & B_CALL) {
Clean up accounting of lfs_uinodes (dirty but unwritten inodes). Make lfs_uinodes a signed quantity for debugging purposes, and set it to zero as fs mount time. Enclose setting/clearing of the dirty flags (IN_MODIFIED, IN_ACCESSED, IN_CLEANING) in macros, and use those macros everywhere. Make LFS_ITIMES use these macros; updated the ITIMES macro in inode.h to know about this. Make ufs_getattr use ITIMES instead of FFS_ITIMES.
2000-07-06 02:25:43 +04:00
LFS_SET_UINO(ip, IN_CLEANING);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
} else {
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
LFS_SET_UINO(ip, IN_MODIFIED);
if (bp->b_lblkno >= 0)
LFS_SET_UINO(ip, IN_UPDATE);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
}
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs->lfs_avail -= fsb;
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
bp->b_flags |= B_DELWRI;
LFS_LOCK_BUF(bp);
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
bp->b_flags &= ~(B_READ | B_ERROR);
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
s = splbio();
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
reassignbuf(bp, bp->b_vp);
splx(s);
Fixes to make dirops and lfs_vflush play together well. In particular, if we are short on vnodes, lfs_vflush from another process can grab a vnode that lfs_markv has already processed but not yet written; but lfs_markv holds the seglock. When lfs_vflush gets around to writing it, the context for copyin is gone. So, now lfs_markv calls copyin itself, rather than having lfs_writeseg do it.
1999-03-26 01:26:52 +03:00
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
}
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
Fixes to make dirops and lfs_vflush play together well. In particular, if we are short on vnodes, lfs_vflush from another process can grab a vnode that lfs_markv has already processed but not yet written; but lfs_markv holds the seglock. When lfs_vflush gets around to writing it, the context for copyin is gone. So, now lfs_markv calls copyin itself, rather than having lfs_writeseg do it.
1999-03-26 01:26:52 +03:00
if(bp->b_flags & B_CALL)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
bp->b_flags &= ~B_BUSY;
else
brelse(bp);
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
return (0);
}
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
void
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_flush_fs(struct lfs *fs, int flags)
Fixed lfs_update (and related functions) so that calls from lfs_fsync will DTRT with vnodes marked VDIROP. In particular, the message "flushing VDIROP" will no longer appear, and the filesystem will remain stable in the event of a crash. This was particularly a problem with NFS-exported LFSes, since fsync was called on every file close.
1999-06-01 07:00:40 +04:00
{
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
if(fs->lfs_ronly == 0 && fs->lfs_dirops == 0)
Fixed lfs_update (and related functions) so that calls from lfs_fsync will DTRT with vnodes marked VDIROP. In particular, the message "flushing VDIROP" will no longer appear, and the filesystem will remain stable in the event of a crash. This was particularly a problem with NFS-exported LFSes, since fsync was called on every file close.
1999-06-01 07:00:40 +04:00
{
/* disallow dirops during flush */
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
fs->lfs_writer++;
Fixed lfs_update (and related functions) so that calls from lfs_fsync will DTRT with vnodes marked VDIROP. In particular, the message "flushing VDIROP" will no longer appear, and the filesystem will remain stable in the event of a crash. This was particularly a problem with NFS-exported LFSes, since fsync was called on every file close.
1999-06-01 07:00:40 +04:00
/*
* We set the queue to 0 here because we
* are about to write all the dirty
* buffers we have. If more come in
* while we're writing the segment, they
* may not get written, so we want the
* count to reflect these new writes
* after the segwrite completes.
*/
if(lfs_dostats)
++lfs_stats.flush_invoked;
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
lfs_segwrite(fs->lfs_ivnode->v_mount, flags);
Fixed lfs_update (and related functions) so that calls from lfs_fsync will DTRT with vnodes marked VDIROP. In particular, the message "flushing VDIROP" will no longer appear, and the filesystem will remain stable in the event of a crash. This was particularly a problem with NFS-exported LFSes, since fsync was called on every file close.
1999-06-01 07:00:40 +04:00
/* XXX KS - allow dirops again */
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
if(--fs->lfs_writer==0)
wakeup(&fs->lfs_dirops);
Fixed lfs_update (and related functions) so that calls from lfs_fsync will DTRT with vnodes marked VDIROP. In particular, the message "flushing VDIROP" will no longer appear, and the filesystem will remain stable in the event of a crash. This was particularly a problem with NFS-exported LFSes, since fsync was called on every file close.
1999-06-01 07:00:40 +04:00
}
}
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/*
* XXX
* This routine flushes buffers out of the B_LOCKED queue when LFS has too
* many locked down. Eventually the pageout daemon will simply call LFS
* when pages need to be reclaimed. Note, we have one static count of locked
* buffers, so we can't have more than a single file system. To make this
* work for multiple file systems, put the count into the mount structure.
*/
void
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_flush(struct lfs *fs, int flags)
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
{
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
int s;
Remove register declarations.
2000-03-30 16:41:09 +04:00
struct mount *mp, *nmp;
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
if(lfs_dostats)
++lfs_stats.write_exceeded;
In lfs_bwrite, don't mark buffers dirty if lfs is mounted read-only. (Previously buffers could be marked dirty by the cleaner, and possibly by other means.) Also check for softdep mount in vfs_shutdown before trying to bawrite buffers, since other filesystems don't need it and lfs doesn't bawrite. (This fragment reviewed by fvdl.) Partially addresses PR#8964.
1999-12-15 10:10:32 +03:00
if (lfs_writing && flags==0) {/* XXX flags */
#ifdef DEBUG_LFS
printf("lfs_flush: not flushing because another flush is active\n");
#endif
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
return;
In lfs_bwrite, don't mark buffers dirty if lfs is mounted read-only. (Previously buffers could be marked dirty by the cleaner, and possibly by other means.) Also check for softdep mount in vfs_shutdown before trying to bawrite buffers, since other filesystems don't need it and lfs doesn't bawrite. (This fragment reviewed by fvdl.) Partially addresses PR#8964.
1999-12-15 10:10:32 +03:00
}
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
lfs_writing = 1;
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
Merge with Lite2 + local changes
1998-03-01 05:20:01 +03:00
simple_lock(&mountlist_slock);
for (mp = mountlist.cqh_first; mp != (void *)&mountlist; mp = nmp) {
if (vfs_busy(mp, LK_NOWAIT, &mountlist_slock)) {
nmp = mp->mnt_list.cqe_next;
continue;
}
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
if (strncmp(&mp->mnt_stat.f_fstypename[0], MOUNT_LFS, MFSNAMELEN)==0)
Fixes associated with filling an LFS: Change the space computation to appear to change the size of the *disk* rather than the *bytes used* when more segment summaries and inode blocks are written. Try to estimate the amount of space that these will take up when more files are written, so the disk size doesn't change too much. Regularize error returns from lfs_valloc, lfs_balloc, lfs_truncate: they now fail entirely, rather than succeeding half-way and leaving the fs in an inconsistent state. Rewrite lfs_truncate, mostly stealing from ffs_truncate. The old lfs_truncate had difficulty truncating a large file to a non-zero size (indirect blocks were not handled appropriately). Unmark VDIROP on fvp after ufs_remove, ufs_rmdir, so these can be reclaimed immediately: this vnode would not be written to disk again anyway if the removal succeeded, and if it failed, no directory operation occurred. ufs_makeinode and ufs_mkdir now remove IN_ADIROP on error.
2000-06-28 00:57:11 +04:00
lfs_flush_fs(((struct ufsmount *)mp->mnt_data)->ufsmount_u.lfs, flags);
Merge with Lite2 + local changes
1998-03-01 05:20:01 +03:00
simple_lock(&mountlist_slock);
nmp = mp->mnt_list.cqe_next;
vfs_unbusy(mp);
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
}
Merge with Lite2 + local changes
1998-03-01 05:20:01 +03:00
simple_unlock(&mountlist_slock);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
#if 1 || defined(DEBUG)
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
s = splbio();
lfs_countlocked(&locked_queue_count, &locked_queue_bytes);
splx(s);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
wakeup(&locked_queue_count);
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
#endif /* 1 || DEBUG */
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
lfs_writing = 0;
}
int
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_check(struct vnode *vp, ufs_daddr_t blkno, int flags)
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
{
int error;
Disallow threshold-initiated cache flush when dirops are active. Also, make SET_ENDOP use lfs_check instead of inlining most of it.
1999-04-12 04:36:47 +04:00
struct lfs *fs;
Prevent dirops from getting around lfs_check and wedging the buffer cache. All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which is removed as soon as the dirop is done (as opposed to VDIROP which stays until the file is written). To address one issue raised in PR#9357.
2000-05-27 04:19:52 +04:00
struct inode *ip;
Address ufs_hashlock/ufs_ihashins protocol bug, discovered while doing a post-mortem of a production machine. Also, take the active dirop count off of the fs and make it global (since it is measuring a global resource) and tie the threshold value LFS_MAXDIROP to desiredvnodes.
1999-11-06 23:33:05 +03:00
extern int lfs_dirvcount;
Disallow threshold-initiated cache flush when dirops are active. Also, make SET_ENDOP use lfs_check instead of inlining most of it.
1999-04-12 04:36:47 +04:00
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
error = 0;
Prevent dirops from getting around lfs_check and wedging the buffer cache. All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which is removed as soon as the dirop is done (as opposed to VDIROP which stays until the file is written). To address one issue raised in PR#9357.
2000-05-27 04:19:52 +04:00
ip = VTOI(vp);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
/* If out of buffers, wait on writer */
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
/* XXX KS - if it's the Ifile, we're probably the cleaner! */
Prevent dirops from getting around lfs_check and wedging the buffer cache. All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which is removed as soon as the dirop is done (as opposed to VDIROP which stays until the file is written). To address one issue raised in PR#9357.
2000-05-27 04:19:52 +04:00
if (ip->i_number == LFS_IFILE_INUM)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
return 0;
Prevent dirops from getting around lfs_check and wedging the buffer cache. All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which is removed as soon as the dirop is done (as opposed to VDIROP which stays until the file is written). To address one issue raised in PR#9357.
2000-05-27 04:19:52 +04:00
/* If we're being called from inside a dirop, don't sleep */
if (ip->i_flag & IN_ADIROP)
Disallow threshold-initiated cache flush when dirops are active. Also, make SET_ENDOP use lfs_check instead of inlining most of it.
1999-04-12 04:36:47 +04:00
return 0;
Prevent dirops from getting around lfs_check and wedging the buffer cache. All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which is removed as soon as the dirop is done (as opposed to VDIROP which stays until the file is written). To address one issue raised in PR#9357.
2000-05-27 04:19:52 +04:00
fs = ip->i_lfs;
/*
* If we would flush below, but dirops are active, sleep.
* Note that a dirop cannot ever reach this code!
*/
while (fs->lfs_dirops > 0 &&
(locked_queue_count > LFS_MAX_BUFS ||
locked_queue_bytes > LFS_MAX_BYTES ||
lfs_dirvcount > LFS_MAXDIROP || fs->lfs_diropwait > 0))
{
++fs->lfs_diropwait;
tsleep(&fs->lfs_writer, PRIBIO+1, "bufdirop", 0);
--fs->lfs_diropwait;
}
if (locked_queue_count > LFS_MAX_BUFS ||
locked_queue_bytes > LFS_MAX_BYTES ||
lfs_dirvcount > LFS_MAXDIROP || fs->lfs_diropwait > 0)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
Disallow threshold-initiated cache flush when dirops are active. Also, make SET_ENDOP use lfs_check instead of inlining most of it.
1999-04-12 04:36:47 +04:00
++fs->lfs_writer;
lfs_flush(fs, flags);
if(--fs->lfs_writer==0)
wakeup(&fs->lfs_dirops);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
}
Fixed lfs_update (and related functions) so that calls from lfs_fsync will DTRT with vnodes marked VDIROP. In particular, the message "flushing VDIROP" will no longer appear, and the filesystem will remain stable in the event of a crash. This was particularly a problem with NFS-exported LFSes, since fsync was called on every file close.
1999-06-01 07:00:40 +04:00
If LFS_DO_ROLLFORWARD is defined, roll forward from the older checkpoint on mount, through the newer checkpoint and on through any newer partial-segments that may have been written but not checkpointed because of an intervening crash. LFS_DO_ROLLFORWARD is not defined by default.
2000-11-27 06:33:57 +03:00
while (locked_queue_count > LFS_WAIT_BUFS
|| locked_queue_bytes > LFS_WAIT_BYTES)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
if(lfs_dostats)
++lfs_stats.wait_exceeded;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#ifdef DEBUG_LFS
In lfs_bwrite, don't mark buffers dirty if lfs is mounted read-only. (Previously buffers could be marked dirty by the cleaner, and possibly by other means.) Also check for softdep mount in vfs_shutdown before trying to bawrite buffers, since other filesystems don't need it and lfs doesn't bawrite. (This fragment reviewed by fvdl.) Partially addresses PR#8964.
1999-12-15 10:10:32 +03:00
printf("lfs_check: waiting: count=%d, bytes=%ld\n",
locked_queue_count, locked_queue_bytes);
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
error = tsleep(&locked_queue_count, PCATCH | PUSER,
"buffers", hz * LFS_BUFWAIT);
If LFS_DO_ROLLFORWARD is defined, roll forward from the older checkpoint on mount, through the newer checkpoint and on through any newer partial-segments that may have been written but not checkpointed because of an intervening crash. LFS_DO_ROLLFORWARD is not defined by default.
2000-11-27 06:33:57 +03:00
if (error != EWOULDBLOCK)
break;
Change the way LFS does block accounting, from trying to infer from the buffer cache flags, to marking the inode and/or indirect blocks with a special disk address UNWRITTEN==-2 when a block is accounted for. (This address is never written to disk, but only used in-core. This is essentially the same method of block accounting as on the UBC branch, where the buffer headers don't exist.) Make sure that truncation is handled properly, especially in the case of holey files. Fixes PR#9994.
2000-05-06 00:59:20 +04:00
/*
* lfs_flush might not flush all the buffers, if some of the
If LFS_DO_ROLLFORWARD is defined, roll forward from the older checkpoint on mount, through the newer checkpoint and on through any newer partial-segments that may have been written but not checkpointed because of an intervening crash. LFS_DO_ROLLFORWARD is not defined by default.
2000-11-27 06:33:57 +03:00
* inodes were locked or if most of them were Ifile blocks
* and we weren't asked to checkpoint. Try flushing again
* to keep us from blocking indefinitely.
Change the way LFS does block accounting, from trying to infer from the buffer cache flags, to marking the inode and/or indirect blocks with a special disk address UNWRITTEN==-2 when a block is accounted for. (This address is never written to disk, but only used in-core. This is essentially the same method of block accounting as on the UBC branch, where the buffer headers don't exist.) Make sure that truncation is handled properly, especially in the case of holey files. Fixes PR#9994.
2000-05-06 00:59:20 +04:00
*/
Prevent dirops from getting around lfs_check and wedging the buffer cache. All the dirop vnops now mark the inodes with a new flag, IN_ADIROP, which is removed as soon as the dirop is done (as opposed to VDIROP which stays until the file is written). To address one issue raised in PR#9357.
2000-05-27 04:19:52 +04:00
if (locked_queue_count > LFS_MAX_BUFS ||
locked_queue_bytes > LFS_MAX_BYTES)
Change the way LFS does block accounting, from trying to infer from the buffer cache flags, to marking the inode and/or indirect blocks with a special disk address UNWRITTEN==-2 when a block is accounted for. (This address is never written to disk, but only used in-core. This is essentially the same method of block accounting as on the UBC branch, where the buffer headers don't exist.) Make sure that truncation is handled properly, especially in the case of holey files. Fixes PR#9994.
2000-05-06 00:59:20 +04:00
{
++fs->lfs_writer;
If LFS_DO_ROLLFORWARD is defined, roll forward from the older checkpoint on mount, through the newer checkpoint and on through any newer partial-segments that may have been written but not checkpointed because of an intervening crash. LFS_DO_ROLLFORWARD is not defined by default.
2000-11-27 06:33:57 +03:00
lfs_flush(fs, flags | SEGM_CKP);
Change the way LFS does block accounting, from trying to infer from the buffer cache flags, to marking the inode and/or indirect blocks with a special disk address UNWRITTEN==-2 when a block is accounted for. (This address is never written to disk, but only used in-core. This is essentially the same method of block accounting as on the UBC branch, where the buffer headers don't exist.) Make sure that truncation is handled properly, especially in the case of holey files. Fixes PR#9994.
2000-05-06 00:59:20 +04:00
if(--fs->lfs_writer==0)
wakeup(&fs->lfs_dirops);
}
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
}
return (error);
}
/*
* Allocate a new buffer header.
*/
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#ifdef MALLOCLOG
# define DOMALLOC(S, T, F) _malloc((S), (T), (F), file, line)
struct buf *
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_newbuf_malloclog(struct lfs *fs, struct vnode *vp, ufs_daddr_t daddr, size_t size, char *file, int line)
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#else
Fix typo in 'malloc' for non-MALLOCLOG case
2000-12-03 09:43:36 +03:00
# define DOMALLOC(S, T, F) malloc((S), (T), (F))
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
struct buf *
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_newbuf(struct lfs *fs, struct vnode *vp, ufs_daddr_t daddr, size_t size)
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
struct buf *bp;
size_t nbytes;
int s;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
nbytes = roundup(size, fsbtob(fs, 1));
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
bp = DOMALLOC(sizeof(struct buf), M_SEGMENT, M_WAITOK);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
bzero(bp, sizeof(struct buf));
if (nbytes)
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
bp->b_data = DOMALLOC(nbytes, M_SEGMENT, M_WAITOK);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
if(nbytes) {
bzero(bp->b_data, nbytes);
}
#ifdef DIAGNOSTIC
if(vp==NULL)
panic("vp is NULL in lfs_newbuf");
if(bp==NULL)
panic("bp is NULL after malloc in lfs_newbuf");
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
s = splbio();
bgetvp(vp, bp);
splx(s);
bp->b_bufsize = size;
bp->b_bcount = size;
bp->b_lblkno = daddr;
bp->b_blkno = daddr;
bp->b_error = 0;
bp->b_resid = 0;
bp->b_iodone = lfs_callback;
bp->b_flags |= B_BUSY | B_CALL | B_NOCACHE;
return (bp);
}
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#ifdef MALLOCLOG
# define DOFREE(A, T) _free((A), (T), file, line)
void
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_freebuf_malloclog(struct buf *bp, char *file, int line)
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#else
# define DOFREE(A, T) free((A), (T))
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
void
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_freebuf(struct buf *bp)
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
int s;
s = splbio();
if(bp->b_vp)
brelvp(bp);
splx(s);
if (!(bp->b_flags & B_INVAL)) { /* B_INVAL indicates a "fake" buffer */
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
DOFREE(bp->b_data, M_SEGMENT);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
bp->b_data = NULL;
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
}
Get rid of some old unnecessary code that cleared B_NEEDCOMMIT from buffers in lfs_writeseg (possibly after they had been freed). If MALLOCLOG is defined, make lfs_newbuf and lfs_freebuf pass along the caller's file and line to _malloc and _free.
2000-12-03 08:56:27 +03:00
DOFREE(bp, M_SEGMENT);
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
}
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
/*
* Definitions for the buffer free lists.
*/
#define BQUEUES 4 /* number of free buffer queues */
#define BQ_LOCKED 0 /* super-blocks &c */
#define BQ_LRU 1 /* lru, useful buffers */
#define BQ_AGE 2 /* rubbish */
#define BQ_EMPTY 3 /* buffer headers with no memory */
extern TAILQ_HEAD(bqueues, buf) bufqueues[BQUEUES];
/*
* Return a count of buffers on the "locked" queue.
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
* Don't count malloced buffers, since they don't detract from the total.
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
*/
void
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
lfs_countlocked(int *count, long *bytes)
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
{
Remove register declarations.
2000-03-30 16:41:09 +04:00
struct buf *bp;
int n = 0;
long int size = 0L;
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
for (bp = bufqueues[BQ_LOCKED].tqh_first; bp;
bp = bp->b_freelist.tqe_next) {
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
if (bp->b_flags & B_CALL) /* Malloced buffer */
continue;
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
n++;
size += bp->b_bufsize;
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
#ifdef DEBUG_LOCKED_LIST
if (n > nbuf)
panic("lfs_countlocked: this can't happen: more"
" buffers locked than exist");
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
}
Correct accounting of lfs_avail, locked_queue_count, and locked_queue_bytes. (PR #11468). In the case of fragment allocation, check to see if enough space is available before extending a fragment already scheduled for writing. The locked_queue_* variables indicate the number of buffer headers and bytes, respectively, that are unavailable to getnewbuf() because they are locked up waiting for LFS to flush them; make sure that that is actually what we're counting, i.e., never count malloced buffers, and always use b_bufsize instead of b_bcount. If DEBUG is defined, the periodic calls to lfs_countlocked will now complain if either counter is incorrect. (In the future lfs_countlocked will not need to be called at all if DEBUG is not defined.)
2000-11-17 22:14:41 +03:00
#ifdef DEBUG
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
/* Theoretically this function never really does anything */
if (n != *count)
printf("lfs_countlocked: adjusted buf count from %d to %d\n",
*count, n);
if (size != *bytes)
printf("lfs_countlocked: adjusted byte count from %ld to %ld\n",
*bytes, size);
#endif
New sources should leave the LFS in a more-or-less working state. Changes include: - DIROP segregation is enabled, and greater care is taken to make sure that a checkpoint completes. Fsck is not needed to remount the filesystem. - Several checks to make sure that the LFS subsystem does not overuse various resources (memory, in particular). - The cleaner routines, lfs_markv in particular, are completely rewritten. A buffer overflow is removed. Greater care is taken to ensure that inodes come from where lfs_cleanerd say they come from (so we know nothing has changed since lfs_bmapv was called). - Fragment allocation is fixed, so that writes beyond end-of-file do the right thing.
1999-03-10 03:20:00 +03:00
*count = n;
*bytes = size;
return;
Update to 4.4-Lite fs code, with local changes.
1994-06-08 15:41:58 +04:00
}