Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/lib/Makefile

174 lines
4.1 KiB
Makefile
Raw Normal View History

Remove the do-external-lib and do-gnu-lib targets, along with external/lib/Makefile and crypto/external/lib/Makefile, replacing them all with SUBDIRs directly from lib/Makefile. compat/compatsubdirs.mk becomes simpler now, as everything is built from lib/Makefile, meaning all the libraries will now be built under compat so update the set lists to account for that.
2010-12-04 00:38:46 +03:00
# $NetBSD: Makefile,v 1.155 2010/12/03 21:38:47 plunky Exp $
Add RCS identifiers.
1993-08-01 09:37:30 +04:00
# from: @(#)Makefile 5.25.1.1 (Berkeley) 5/7/91
initial import of 386bsd-0.1 sources
1993-03-21 12:45:37 +03:00
Add MK... variables to enable/disable various aspects of building crypto support into the system. See share/mk/bsd.README for more a full description.
2000-06-23 10:01:10 +04:00
.include <bsd.own.mk>
Remove the do-external-lib and do-gnu-lib targets, along with external/lib/Makefile and crypto/external/lib/Makefile, replacing them all with SUBDIRs directly from lib/Makefile. compat/compatsubdirs.mk becomes simpler now, as everything is built from lib/Makefile, meaning all the libraries will now be built under compat so update the set lists to account for that.
2010-12-04 00:38:46 +03:00
SUBDIR= csu
.if (${MKGCC} != "no")
.if (${USE_COMPILERCRTSTUFF} == "yes")
SUBDIR+= ../gnu/lib/crtstuff4
.endif
SUBDIR+= ../gnu/lib/libgcc4
.endif
SUBDIR+= libc
SUBDIR+= .WAIT
#
# The SUBDIRs above are included here for completeness but should be built
# and installed prior to make(dependall) in this file, as libraries listed
# below will depend on versions from DESTDIR only.
#
SUBDIR+=libarch \
Remove the libatf library and add libatf-c and libatf-c++; per import of atf-0.5.
2008-05-01 19:33:33 +04:00
libbsdmalloc libbluetooth libbz2 \
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@, NetBSD Foundation Membership still pending.) This stack was written by Iain under sponsorship from Itronix Inc. The stack includes support for rfcomm networking (networking via your bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets. Drivers for both PCMCIA and USB bluetooth controllers are included.
2006-06-19 19:44:33 +04:00
libcompat libcrypt \
Userland now builds and uses terminfo instead of termcap. OK: core@, jdc@
2010-02-03 18:34:37 +03:00
libintl libkvm libm \
libform and libmenu need libcurses.
2008-03-12 03:21:29 +03:00
libossaudio libpcap libpci libpmc libposix libprop libpthread \
remove libsdp as improved functionality has been enabled in libbluetooth.
2009-05-12 22:07:54 +04:00
libpthread_dbg libpuffs libresolv librmt librpcsvc librt \
Add library for rump syscall client stubs.
2010-11-05 00:01:28 +03:00
librumpclient libterminfo libusbhid libutil libwrap liby libz
Only build exportable telnet/libtelnet if the domestic version doesn't exist in the source tree or defined(EXPORTABLE_SYSTEM). This works around the fact that telnet(1) will break during a "make build" because the exportable libtelnet will get installed while the domestic telnet(1) binary is still in place. (XXX)
1996-03-10 08:45:38 +03:00
Remove the do-external-lib and do-gnu-lib targets, along with external/lib/Makefile and crypto/external/lib/Makefile, replacing them all with SUBDIRs directly from lib/Makefile. compat/compatsubdirs.mk becomes simpler now, as everything is built from lib/Makefile, meaning all the libraries will now be built under compat so update the set lists to account for that.
2010-12-04 00:38:46 +03:00
.if (${MKMDNS} != "no")
SUBDIR+= ../external/apache2/mDNSResponder/lib
.endif
SUBDIR+= ../external/bsd/am-utils/lib
.if (${MKATF} != "no")
SUBDIR+= ../external/bsd/atf/lib
.endif
SUBDIR+= ../external/bsd/flex/lib
SUBDIR+= ../external/bsd/libdwarf/lib
SUBDIR+= ../external/bsd/libelf/lib
SUBDIR+= ../external/bsd/libevent/lib
SUBDIR+= ../external/mit/lua/lib
SUBDIR+= ../external/public-domain/xz/lib
SUBDIR+= ../gnu/lib/libmalloc
.if (${MKGCC} != "no")
SUBDIR+= ../gnu/lib/libobjc4
.endif
hook the new flex library
2009-10-26 04:18:46 +03:00
Userland now builds and uses terminfo instead of termcap. OK: core@, jdc@
2010-02-03 18:34:37 +03:00
# libcurses needs libtermlib
SUBDIR+= .WAIT libcurses
libform and libmenu need libcurses.
2008-03-12 03:21:29 +03:00
# libform and libmenu need libcurses
SUBDIR+= .WAIT libform libmenu
Split the notion of building Hesiod, Kerberos, S/key, and YP infrastructure and using that infrastructure in programs. * MKHESIOD, MKKERBEROS, MKSKEY, and MKYP control building of the infratsructure (libraries, support programs, etc.) * USE_HESIOD, USE_KERBEROS, USE_SKEY, and USE_YP control building of support for using the corresponding API in various libraries/programs that can use it. As discussed on tech-toolchain.
2002-03-22 21:10:19 +03:00
.if (${MKSKEY} != "no")
SUBDIR+= libskey
.endif
Merge a bunch of things from crypto-us and crypto-intl into basesrc, adding support for Heimdal/KTH Kerberos where easy to do so. Eliminate bsd.crypto.mk. There is still a bunch more work to do, but crypto is now more-or-less fully merged into the base NetBSD distribution.
2000-06-20 10:00:24 +04:00
# XXX Crypto bits must be done before libtelnet.
Add MK... variables to enable/disable various aspects of building crypto support into the system. See share/mk/bsd.README for more a full description.
2000-06-23 10:01:10 +04:00
.if (${MKCRYPTO} != "no")
OpenSSL moved to crypto/external
2009-07-20 03:35:02 +04:00
SUBDIR+= ../crypto/external/bsd/openssl/lib
Add MK... variables to enable/disable various aspects of building crypto support into the system. See share/mk/bsd.README for more a full description.
2000-06-23 10:01:10 +04:00
.endif # MKCRYPTO != no
initial import of 386bsd-0.1 sources
1993-03-21 12:45:37 +03:00
Split the notion of building Hesiod, Kerberos, S/key, and YP infrastructure and using that infrastructure in programs. * MKHESIOD, MKKERBEROS, MKSKEY, and MKYP control building of the infratsructure (libraries, support programs, etc.) * USE_HESIOD, USE_KERBEROS, USE_SKEY, and USE_YP control building of support for using the corresponding API in various libraries/programs that can use it. As discussed on tech-toolchain.
2002-03-22 21:10:19 +03:00
.if (${MKKERBEROS} != "no")
# Heimdal Kerberos 5 libraries
insert .WAIT between libcom_err and libasn1.
2007-03-01 05:54:51 +03:00
SUBDIR+= .WAIT libroken libvers libcom_err .WAIT libasn1
Import Heimdal-1.1
2008-03-22 11:36:48 +03:00
SUBDIR+= .WAIT libhx509
Split the notion of building Hesiod, Kerberos, S/key, and YP infrastructure and using that infrastructure in programs. * MKHESIOD, MKKERBEROS, MKSKEY, and MKYP control building of the infratsructure (libraries, support programs, etc.) * USE_HESIOD, USE_KERBEROS, USE_SKEY, and USE_YP control building of support for using the corresponding API in various libraries/programs that can use it. As discussed on tech-toolchain.
2002-03-22 21:10:19 +03:00
Fix the checkflist for builds without Kerberos 4 (MKKERBEROS4=no) and without Kerberos 4 & 5 (MKKERBEROS=no). Previously checkflist complained of missing files. * move kerberos- and kerberos 4-only files into new flists, distrib/sets/lists/*/krb.* * make the flist generators grok MKKERBEROS{,4} variables * fix Makefiles which treat MKKERBEROS=no as MKKERBEROS5=no. 9 out of 10 experts agree that it is ludicrous to build w/ KERBEROS4 and w/o KERBEROS5. * fix header files, also, which treat MKKERBEROS=no as MKKERBEROS5=no. * omit some Kerberos-only subdirectories from the build as MKKERBEROS{,4} indicate (I acknowledge the sentiment that flists are the wrong way to go, and that the makefiles should produce the metalog directly. That sounds to me like the right way to go, but I am not prepared to do revamp all the makefiles. While my approach is expedient, it fits painlessly within the current build architecture until we are delivered from flist purgatory, and it does not postpone our delivery. Fair enough?)
2003-12-11 12:46:26 +03:00
.endif # MKKERBEROS != no
Split the notion of building Hesiod, Kerberos, S/key, and YP infrastructure and using that infrastructure in programs. * MKHESIOD, MKKERBEROS, MKSKEY, and MKYP control building of the infratsructure (libraries, support programs, etc.) * USE_HESIOD, USE_KERBEROS, USE_SKEY, and USE_YP control building of support for using the corresponding API in various libraries/programs that can use it. As discussed on tech-toolchain.
2002-03-22 21:10:19 +03:00
Use bsd.crypto.mk.
1999-07-13 02:04:09 +04:00
SUBDIR+= libtelnet
ipsec support library. mainly for debugging, and policy text->binary conversion. NO crypto code is included so it is export safe.
1999-07-02 00:15:26 +04:00
# IPv6/IPsec
SUBDIR+= libipsec
refine i18n stuffs. - add libc/citrus directory. this directory contains the common stuffs not only for locale but also other facilities relating to i18n (e.g. iconv). - To keep the binary compatibility for the ctype modules easily, the interface between libc and the modules is simplified. - For the future integrated extension, module pool is renamed from "/usr/lib/runemodule" to "/usr/lib/i18n". In the future, this directory will contain the modules for "iconv", "collation", etc. - some cosmetic changes. - Bug fix for runetype.h; __attribute__((__packed__)) is placed at the wrong position and it is invalid unintentionally. But, the all members of the structures seem well-aligned. Thus, this bug causes no problem, hopefully. HEADS UP: - /usr/lib/rumemodule is obsoleted. If you use the multibyte locales, you need to install /usr/lib/i18n/* from sys/lib/i18n_module . - The binary compatibility of /usr/share/locale/*/LC_CTYPE is probably kept. Perhaps, the bug fix about __packed__ mentioned above breaks the compatibility... Be careful especially on 64bit platforms.
2002-03-18 01:14:05 +03:00
# I18N modules
SUBDIR+= i18n_module
build multibyte locale modules. installed into /usr/lib/runemodule and dynamically loaded at runtime.
2001-01-25 12:16:38 +03:00
Implement DEPLIBS (in Makefile.inc for now), which adds all the listed libraries to LDADD & DPADD for the current library, using -L OBJDIR-of-DEPLIB so that the current library can link with the DEPLIB library built but not installed. Set DEPLIBS appropriately, rather than explictly adding LDADD/DPADD for various libraries. Reorder library build order so that libraries that depend upon any other library are built at the end. Whilst this change could be done in a more generic manner (and I intend to work on that), it does remove the need to implement top-level build targets such as "do-lib-des" (etc).
2004-07-30 11:02:53 +04:00
#
# Libraries that depend upon any listed previously
Implement libssh as a public library, as pam_ssh needs it.
2005-01-03 09:00:12 +03:00
# (and those that depend upon these [and ...])
Implement DEPLIBS (in Makefile.inc for now), which adds all the listed libraries to LDADD & DPADD for the current library, using -L OBJDIR-of-DEPLIB so that the current library can link with the DEPLIB library built but not installed. Set DEPLIBS appropriately, rather than explictly adding LDADD/DPADD for various libraries. Reorder library build order so that libraries that depend upon any other library are built at the end. Whilst this change could be done in a more generic manner (and I intend to work on that), it does remove the need to implement top-level build targets such as "do-lib-des" (etc).
2004-07-30 11:02:53 +04:00
#
Provide the minimum set of .WAIT barriers, adding explanatory comments. From Patrick Welche, many thanks.
2005-06-03 18:28:07 +04:00
#==================== 1st library dependency barrier ====================
SUBDIR+= .WAIT
SUBDIR+= libedit # depends on libterm
move libradius to build after libcrypto.
2005-11-26 19:07:15 +03:00
SUBDIR+= libradius # depends on libcrypto - only if ${MKCRYPTO}
Provide the minimum set of .WAIT barriers, adding explanatory comments. From Patrick Welche, many thanks.
2005-06-03 18:28:07 +04:00
Implement DEPLIBS (in Makefile.inc for now), which adds all the listed libraries to LDADD & DPADD for the current library, using -L OBJDIR-of-DEPLIB so that the current library can link with the DEPLIB library built but not installed. Set DEPLIBS appropriately, rather than explictly adding LDADD/DPADD for various libraries. Reorder library build order so that libraries that depend upon any other library are built at the end. Whilst this change could be done in a more generic manner (and I intend to work on that), it does remove the need to implement top-level build targets such as "do-lib-des" (etc).
2004-07-30 11:02:53 +04:00
.if (${MKKERBEROS} != "no")
Provide the minimum set of .WAIT barriers, adding explanatory comments. From Patrick Welche, many thanks.
2005-06-03 18:28:07 +04:00
SUBDIR+= libkrb5 # depends on libcrypto and more
Implement DEPLIBS (in Makefile.inc for now), which adds all the listed libraries to LDADD & DPADD for the current library, using -L OBJDIR-of-DEPLIB so that the current library can link with the DEPLIB library built but not installed. Set DEPLIBS appropriately, rather than explictly adding LDADD/DPADD for various libraries. Reorder library build order so that libraries that depend upon any other library are built at the end. Whilst this change could be done in a more generic manner (and I intend to work on that), it does remove the need to implement top-level build targets such as "do-lib-des" (etc).
2004-07-30 11:02:53 +04:00
.endif
Provide the minimum set of .WAIT barriers, adding explanatory comments. From Patrick Welche, many thanks.
2005-06-03 18:28:07 +04:00
descend into librefuse if building with MKPUFFS
2007-02-11 21:36:26 +03:00
SUBDIR+= librefuse # depends on libpuffs
Install rump libraries and utilities to the base system and remove the private non-installed build infrastructure from sys/rump. breakdown of commit: * install relevant headers into /usr/include/rump * build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern from src/lib and install as librumpuser and librump, respectively + this retains the ability to test a librump build with just the kernel sources at hand * move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib for general consumption, they are not kernel-space dwellers anyway * build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs * add chapter 3 manual pages for rump, rumpuser, ukfs and p2k * build and install userspace kernel file system daemons if MKPUFFS=yes is spexified * retire fsconsole for now, it will make a comeback with an actually implemented version shortly
2008-07-29 17:17:40 +04:00
SUBDIR+= librumpuser # depends on libpthread
avoid some subdirs that need -lcrypto, for MKCRYPTO=no.
2009-12-30 02:01:09 +03:00
.if (${MKCRYPTO} != "no")
build libnetpgp and libssh earlier. look for libssh in the right place.
2009-06-09 09:20:15 +04:00
# these depend on libcrypto*, libz and libbz2
SUBDIR+= ../crypto/external/bsd/openssh/lib
fix the build; we need libmj installed before compiling netpgp binaries.
2010-08-08 01:32:28 +04:00
SUBDIR+= ../crypto/external/bsd/netpgp/libmj
Add a .WAIT statement after libmj, should fix a transient problem observed by moof.
2010-09-01 20:01:27 +04:00
SUBDIR+= .WAIT
build libnetpgp and libssh earlier. look for libssh in the right place.
2009-06-09 09:20:15 +04:00
SUBDIR+= ../crypto/external/bsd/netpgp/lib
avoid some subdirs that need -lcrypto, for MKCRYPTO=no.
2009-12-30 02:01:09 +03:00
.endif
build libnetpgp and libssh earlier. look for libssh in the right place.
2009-06-09 09:20:15 +04:00
Remove the do-external-lib and do-gnu-lib targets, along with external/lib/Makefile and crypto/external/lib/Makefile, replacing them all with SUBDIRs directly from lib/Makefile. compat/compatsubdirs.mk becomes simpler now, as everything is built from lib/Makefile, meaning all the libraries will now be built under compat so update the set lists to account for that.
2010-12-04 00:38:46 +03:00
SUBDIR+= ../external/bsd/bind/lib # depends on libcrypto
SUBDIR+= ../external/bsd/fetch/lib # depends on libssl
SUBDIR+= ../external/bsd/file/lib # depends on libz
.if (${MKISCSI} != "no")
SUBDIR+= ../external/bsd/iscsi/lib # depends on libpthread
.endif
SUBDIR+= ../external/bsd/libarchive/lib # depends on libxz
build the ldap libraries; am-utils needs them.
2010-11-21 06:43:39 +03:00
.if (${MKLDAP} != "no")
SUBDIR+= ../external/bsd/openldap/lib
.endif
Remove the do-external-lib and do-gnu-lib targets, along with external/lib/Makefile and crypto/external/lib/Makefile, replacing them all with SUBDIRs directly from lib/Makefile. compat/compatsubdirs.mk becomes simpler now, as everything is built from lib/Makefile, meaning all the libraries will now be built under compat so update the set lists to account for that.
2010-12-04 00:38:46 +03:00
.if (${MKBINUTILS} != "no")
SUBDIR+= ../external/gpl3/binutils/lib # libbfd depends on libz
.endif
.if (${MKGCC} != "no" && ${MKCXX} != "no")
SUBDIR+= ../gnu/lib/libstdc++-v3_4 # depends on libm
SUBDIR+= ../gnu/lib/libsupc++4
.endif
Provide the minimum set of .WAIT barriers, adding explanatory comments. From Patrick Welche, many thanks.
2005-06-03 18:28:07 +04:00
#==================== 2nd library dependency barrier ====================
SUBDIR+= .WAIT
Add proper DT_NEEDED dependencies. From Jukka Salmi
2006-03-18 00:43:16 +03:00
.if (${MKKERBEROS} != "no")
# Heimdal Kerberos 5 libraries depending on libkrb5 and more
Import Heimdal-1.1
2008-03-22 11:36:48 +03:00
SUBDIR+= libheimntlm
SUBDIR+= .WAIT libgssapi libhdb
SUBDIR+= .WAIT libkadm5srv libkadm5clnt libkafs libsl libss
Add proper DT_NEEDED dependencies. From Jukka Salmi
2006-03-18 00:43:16 +03:00
.endif
Install rump libraries and utilities to the base system and remove the private non-installed build infrastructure from sys/rump. breakdown of commit: * install relevant headers into /usr/include/rump * build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern from src/lib and install as librumpuser and librump, respectively + this retains the ability to test a librump build with just the kernel sources at hand * move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib for general consumption, they are not kernel-space dwellers anyway * build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs * add chapter 3 manual pages for rump, rumpuser, ukfs and p2k * build and install userspace kernel file system daemons if MKPUFFS=yes is spexified * retire fsconsole for now, it will make a comeback with an actually implemented version shortly
2008-07-29 17:17:40 +04:00
SUBDIR+= librump # depends on librumpuser
Tie in ../external/lib after the "2nd" dependency barrier. Move libpam to after a "3rd" dependency barrier, since PAM modules may depend upon external/lib libraries such as libldap.
2008-05-22 18:16:11 +04:00
#==================== 3rd library dependency barrier ====================
SUBDIR+= .WAIT
Don't build libpam and associated bits if the target platform doesn't support shared libraries (sun2 and evbsh5 at it would seem), or if the user has specified MKPIC=no. Also introduce a new tag to the set lists ("pam"), so that the non-shlib ports can once again complete a release build. Discussed with christos and lukem.
2005-01-10 03:20:21 +03:00
.if (${MKPAM} != "no")
Tie in ../external/lib after the "2nd" dependency barrier. Move libpam to after a "3rd" dependency barrier, since PAM modules may depend upon external/lib libraries such as libldap.
2008-05-22 18:16:11 +04:00
SUBDIR+= libpam # depends on libkrb5, libkafs and more
Don't build libpam and associated bits if the target platform doesn't support shared libraries (sun2 and evbsh5 at it would seem), or if the user has specified MKPIC=no. Also introduce a new tag to the set lists ("pam"), so that the non-shlib ports can once again complete a release build. Discussed with christos and lukem.
2005-01-10 03:20:21 +03:00
.endif
Move libpam until after everything that it depends upon. Fixes build that starts with empty OBJ and DEST dirs.
2004-12-29 18:49:42 +03:00
avoid some subdirs that need -lcrypto, for MKCRYPTO=no.
2009-12-30 02:01:09 +03:00
.if (${MKCRYPTO} != "no")
install librumpcrypto component: kernel crypto routines
2009-09-03 16:33:54 +04:00
SUBDIR+= librumpcrypto # depends on librump
avoid some subdirs that need -lcrypto, for MKCRYPTO=no.
2009-12-30 02:01:09 +03:00
.endif
Build & install rumpdev, a device component for rump. It currently supports autoconf and is required for example by pseudo-device rump components.
2009-09-03 19:35:58 +04:00
SUBDIR+= librumpdev # depends on librump
build librumpnet
2008-10-16 13:44:12 +04:00
SUBDIR+= librumpnet # depends on librump
Split vfs out of rumpkern into rumpvfs. Non-fs rumps no longer include the file system code. File system rumps explicitly need to include rumpvfs from now on.
2008-11-19 17:10:48 +03:00
SUBDIR+= librumpvfs # depends on librump
Install rump libraries and utilities to the base system and remove the private non-installed build infrastructure from sys/rump. breakdown of commit: * install relevant headers into /usr/include/rump * build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern from src/lib and install as librumpuser and librump, respectively + this retains the ability to test a librump build with just the kernel sources at hand * move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib for general consumption, they are not kernel-space dwellers anyway * build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs * add chapter 3 manual pages for rump, rumpuser, ukfs and p2k * build and install userspace kernel file system daemons if MKPUFFS=yes is spexified * retire fsconsole for now, it will make a comeback with an actually implemented version shortly
2008-07-29 17:17:40 +04:00
#==================== 4th library dependency barrier ====================
SUBDIR+= .WAIT
LIBDPLIBS on librumpvfs
2008-11-27 19:14:46 +03:00
SUBDIR+= libukfs # depends on librump and librumpvfs
#==================== 5th library dependency barrier ====================
SUBDIR+= .WAIT
SUBDIR+= libp2k # depends on libpuffs, librumpvfs and libukfs
Install rump libraries and utilities to the base system and remove the private non-installed build infrastructure from sys/rump. breakdown of commit: * install relevant headers into /usr/include/rump * build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern from src/lib and install as librumpuser and librump, respectively + this retains the ability to test a librump build with just the kernel sources at hand * move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib for general consumption, they are not kernel-space dwellers anyway * build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs * add chapter 3 manual pages for rump, rumpuser, ukfs and p2k * build and install userspace kernel file system daemons if MKPUFFS=yes is spexified * retire fsconsole for now, it will make a comeback with an actually implemented version shortly
2008-07-29 17:17:40 +04:00
initial import of 386bsd-0.1 sources
1993-03-21 12:45:37 +03:00
.include <bsd.subdir.mk>