NetBSD/sys/dev/ic/wdc.c

/*	$NetBSD: wdc.c,v 1.198 2004/08/12 21:34:52 thorpej Exp $ */

/*
 * Copyright (c) 1998, 2001, 2003 Manuel Bouyer.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *  This product includes software developed by Manuel Bouyer.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*-
 * Copyright (c) 1998, 2003 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * CODE UNTESTED IN THE CURRENT REVISION:
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: wdc.c,v 1.198 2004/08/12 21:34:52 thorpej Exp $");

#ifndef WDCDEBUG
#define WDCDEBUG
#endif /* WDCDEBUG */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/buf.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/syslog.h>
#include <sys/proc.h>

#include <machine/intr.h>
#include <machine/bus.h>

#ifndef __BUS_SPACE_HAS_STREAM_METHODS
#define bus_space_write_multi_stream_2	bus_space_write_multi_2
#define bus_space_write_multi_stream_4	bus_space_write_multi_4
#define bus_space_read_multi_stream_2	bus_space_read_multi_2
#define bus_space_read_multi_stream_4	bus_space_read_multi_4
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */

#include <dev/ata/atavar.h>
#include <dev/ata/atareg.h>
#include <dev/ic/wdcreg.h>
#include <dev/ic/wdcvar.h>

#include "locators.h"

#include "ataraid.h"
#include "atapibus.h"
#include "wd.h"

#if NATARAID > 0
#include <dev/ata/ata_raidvar.h>
#endif

#define WDCDELAY  100 /* 100 microseconds */
#define WDCNDELAY_RST (WDC_RESET_WAIT * 1000 / WDCDELAY)
#if 0
/* If you enable this, it will report any delays more than WDCDELAY * N long. */
#define WDCNDELAY_DEBUG	50
#endif

/* When polling wait that much and then tsleep for 1/hz seconds */
#define WDCDELAY_POLL 1 /* ms */ 

/* timeout for the control commands */
#define WDC_CTRL_DELAY 10000 /* 10s, for the recall command */

#if NWD > 0
extern const struct ata_bustype wdc_ata_bustype; /* in ata_wdc.c */
#else
/* A fake one, the autoconfig will print "wd at foo ... not configured */
const struct ata_bustype wdc_ata_bustype = {
	SCSIPI_BUSTYPE_ATA,
	NULL,
	NULL,
	NULL,
	NULL,
	NULL,
	NULL,
	NULL
};
#endif

static int	wdcprobe1(struct wdc_channel*, int);
static void	__wdcerror(struct wdc_channel*, char *);
static int	__wdcwait_reset(struct wdc_channel *, int, int);
static void	__wdccommand_done(struct wdc_channel *, struct ata_xfer *);
static void	__wdccommand_done_end(struct wdc_channel *, struct ata_xfer *);
static void	__wdccommand_kill_xfer(struct wdc_channel *,
			               struct ata_xfer *, int);
static void	__wdccommand_start(struct wdc_channel *, struct ata_xfer *);
static int	__wdccommand_intr(struct wdc_channel *, struct ata_xfer *, int);
static int	__wdcwait(struct wdc_channel *, int, int, int);

#define DEBUG_INTR   0x01
#define DEBUG_XFERS  0x02
#define DEBUG_STATUS 0x04
#define DEBUG_FUNCS  0x08
#define DEBUG_PROBE  0x10
#define DEBUG_DETACH 0x20
#define DEBUG_DELAY  0x40
#ifdef WDCDEBUG
int wdcdebug_mask = 0;
int wdc_nxfer = 0;
#define WDCDEBUG_PRINT(args, level)  if (wdcdebug_mask & (level)) printf args
#else
#define WDCDEBUG_PRINT(args, level)
#endif

/*
 * A queue of atabus instances, used to ensure the same bus probe order
 * for a given hardware configuration at each boot.
 */
struct atabus_initq_head atabus_initq_head =
    TAILQ_HEAD_INITIALIZER(atabus_initq_head);
struct simplelock atabus_interlock = SIMPLELOCK_INITIALIZER;

/*
 * Initialize the "shadow register" handles for a standard wdc controller.
 */
void
wdc_init_shadow_regs(struct wdc_channel *chp)
{

	chp->cmd_iohs[wd_status] = chp->cmd_iohs[wd_command];
	chp->cmd_iohs[wd_features] = chp->cmd_iohs[wd_error];
}

/* Test to see controller with at last one attached drive is there.
 * Returns a bit for each possible drive found (0x01 for drive 0,
 * 0x02 for drive 1).
 * Logic:
 * - If a status register is at 0xff, assume there is no drive here
 *   (ISA has pull-up resistors).  Similarly if the status register has
 *   the value we last wrote to the bus (for IDE interfaces without pullups).
 *   If no drive at all -> return.
 * - reset the controller, wait for it to complete (may take up to 31s !).
 *   If timeout -> return.
 * - test ATA/ATAPI signatures. If at last one drive found -> return.
 * - try an ATA command on the master.
 */

static void
wdc_drvprobe(struct wdc_channel *chp)
{
	struct ataparams params;
	struct wdc_softc *wdc = chp->ch_wdc;
	u_int8_t st0 = 0, st1 = 0;
	int i, error;

	if (wdcprobe1(chp, 0) == 0) {
		/* No drives, abort the attach here. */
		return;
	}

	/* for ATA/OLD drives, wait for DRDY, 3s timeout */
	for (i = 0; i < mstohz(3000); i++) {
		if (chp->ch_drive[0].drive_flags & (DRIVE_ATA|DRIVE_OLD)) {
			if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
				wdc->select(chp,0);
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
			    0, WDSD_IBM);
			delay(10);	/* 400ns delay */
			st0 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_status], 0);
		}
		
		if (chp->ch_drive[1].drive_flags & (DRIVE_ATA|DRIVE_OLD)) {
			if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
				wdc->select(chp,1);
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
			    0, WDSD_IBM | 0x10);
			delay(10);	/* 400ns delay */
			st1 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_status], 0);
		}
	
		if (((chp->ch_drive[0].drive_flags & (DRIVE_ATA|DRIVE_OLD))
			== 0 ||
		    (st0 & WDCS_DRDY)) &&
		    ((chp->ch_drive[1].drive_flags & (DRIVE_ATA|DRIVE_OLD))
			== 0 ||
		    (st1 & WDCS_DRDY)))
			break;
		tsleep(&params, PRIBIO, "atadrdy", 1);
	}
	if ((st0 & WDCS_DRDY) == 0)
		chp->ch_drive[0].drive_flags &= ~(DRIVE_ATA|DRIVE_OLD);
	if ((st1 & WDCS_DRDY) == 0)
		chp->ch_drive[1].drive_flags &= ~(DRIVE_ATA|DRIVE_OLD);

	WDCDEBUG_PRINT(("%s:%d: wait DRDY st0 0x%x st1 0x%x\n",
	    wdc->sc_dev.dv_xname,
	    chp->ch_channel, st0, st1), DEBUG_PROBE);

	/* Wait a bit, some devices are weird just after a reset. */
	delay(5000);

	for (i = 0; i < 2; i++) {
		/* XXX This should be done by other code. */
		chp->ch_drive[i].chnl_softc = chp;
		chp->ch_drive[i].drive = i;

		/*
		 * Init error counter so that an error withing the first xfers
		 * will trigger a downgrade
		 */
		chp->ch_drive[i].n_dmaerrs = NERRS_MAX-1;

		/* If controller can't do 16bit flag the drives as 32bit */
		if ((wdc->cap &
		    (WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32)) ==
		    WDC_CAPABILITY_DATA32)
			chp->ch_drive[i].drive_flags |= DRIVE_CAP32;
		if ((chp->ch_drive[i].drive_flags & DRIVE) == 0)
			continue;

		/* Shortcut in case we've been shutdown */
		if (chp->ch_flags & WDCF_SHUTDOWN)
			return;

		/* issue an identify, to try to detect ghosts */
		error = ata_get_params(&chp->ch_drive[i],
		    AT_WAIT | AT_POLL, &params);
		if (error != CMD_OK) {
			tsleep(&params, PRIBIO, "atacnf", mstohz(1000));

			/* Shortcut in case we've been shutdown */
			if (chp->ch_flags & WDCF_SHUTDOWN)
				return;

			error = ata_get_params(&chp->ch_drive[i],
			    AT_WAIT | AT_POLL, &params);
		}
		if (error == CMD_OK) {
			/* If IDENTIFY succeeded, this is not an OLD ctrl */
			chp->ch_drive[0].drive_flags &= ~DRIVE_OLD;
			chp->ch_drive[1].drive_flags &= ~DRIVE_OLD;
		} else {
			chp->ch_drive[i].drive_flags &=
			    ~(DRIVE_ATA | DRIVE_ATAPI);
			WDCDEBUG_PRINT(("%s:%d:%d: IDENTIFY failed (%d)\n",
			    wdc->sc_dev.dv_xname,
			    chp->ch_channel, i, error), DEBUG_PROBE);
			if ((chp->ch_drive[i].drive_flags & DRIVE_OLD) == 0)
				continue;
			/*
			 * Pre-ATA drive ?
			 * Test registers writability (Error register not
			 * writable, but cyllo is), then try an ATA command.
			 */
			if (wdc->cap & WDC_CAPABILITY_SELECT)
				wdc->select(chp,i);
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sdh], 0, WDSD_IBM | (i << 4));
			delay(10);	/* 400ns delay */
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_error],
			    0, 0x58);
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0, 0xa5);
			if (bus_space_read_1(chp->cmd_iot,
				chp->cmd_iohs[wd_error], 0) == 0x58 ||
			    bus_space_read_1(chp->cmd_iot,
				chp->cmd_iohs[wd_cyl_lo], 0) != 0xa5) {
				WDCDEBUG_PRINT(("%s:%d:%d: register "
				    "writability failed\n",
				    wdc->sc_dev.dv_xname,
				    chp->ch_channel, i), DEBUG_PROBE);
				    chp->ch_drive[i].drive_flags &= ~DRIVE_OLD;
				    continue;
			}
			if (wdc_wait_for_ready(chp, 10000, 0) == WDCWAIT_TOUT) {
				WDCDEBUG_PRINT(("%s:%d:%d: not ready\n",
				    wdc->sc_dev.dv_xname,
				    chp->ch_channel, i), DEBUG_PROBE);
				chp->ch_drive[i].drive_flags &= ~DRIVE_OLD;
				continue;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_command], 0, WDCC_RECAL);
			delay(10);	/* 400ns delay */
			if (wdc_wait_for_ready(chp, 10000, 0) == WDCWAIT_TOUT) {
				WDCDEBUG_PRINT(("%s:%d:%d: WDCC_RECAL failed\n",
				    wdc->sc_dev.dv_xname,
				    chp->ch_channel, i), DEBUG_PROBE);
				chp->ch_drive[i].drive_flags &= ~DRIVE_OLD;
			} else {
				chp->ch_drive[0].drive_flags &=
				    ~(DRIVE_ATA | DRIVE_ATAPI);
				chp->ch_drive[1].drive_flags &=
				    ~(DRIVE_ATA | DRIVE_ATAPI);
			}
		}
	}
}

void
atabusconfig(struct atabus_softc *atabus_sc)
{
	struct wdc_channel *chp = atabus_sc->sc_chan;
	struct wdc_softc *wdc = chp->ch_wdc;
	int i;
	struct atabus_initq *atabus_initq = NULL;

	/* Probe for the drives. */
	(*wdc->drv_probe)(chp);

	WDCDEBUG_PRINT(("atabusattach: ch_drive_flags 0x%x 0x%x\n",
	    chp->ch_drive[0].drive_flags, chp->ch_drive[1].drive_flags),
	    DEBUG_PROBE);

	/* If no drives, abort here */
	if ((chp->ch_drive[0].drive_flags & DRIVE) == 0 &&
	    (chp->ch_drive[1].drive_flags & DRIVE) == 0)
		goto out;

	/* Shortcut in case we've been shutdown */
	if (chp->ch_flags & WDCF_SHUTDOWN)
		goto out;

	/* Make sure the devices probe in atabus order to avoid jitter. */
	simple_lock(&atabus_interlock);
	while(1) {
		atabus_initq = TAILQ_FIRST(&atabus_initq_head);
		if (atabus_initq->atabus_sc == atabus_sc)
			break;
		ltsleep(&atabus_initq_head, PRIBIO, "ata_initq", 0,
		    &atabus_interlock);
	}
	simple_unlock(&atabus_interlock);

	/*
	 * Attach an ATAPI bus, if needed.
	 */
	if ((chp->ch_drive[0].drive_flags & DRIVE_ATAPI) ||
	    (chp->ch_drive[1].drive_flags & DRIVE_ATAPI)) {
#if NATAPIBUS > 0
		wdc_atapibus_attach(atabus_sc);
#else
		/*
		 * Fake the autoconfig "not configured" message
		 */
		aprint_normal("atapibus at %s not configured\n",
		    wdc->sc_dev.dv_xname);
		chp->atapibus = NULL;
		chp->ch_drive[0].drive_flags &= ~DRIVE_ATAPI;
		chp->ch_drive[1].drive_flags &= ~DRIVE_ATAPI;
#endif
	}

	for (i = 0; i < 2; i++) {
		struct ata_device adev;
		if ((chp->ch_drive[i].drive_flags &
		    (DRIVE_ATA | DRIVE_OLD)) == 0) {
			continue;
		}
		memset(&adev, 0, sizeof(struct ata_device));
		adev.adev_bustype = &wdc_ata_bustype;
		adev.adev_channel = chp->ch_channel;
		adev.adev_openings = 1;
		adev.adev_drv_data = &chp->ch_drive[i];
		chp->ata_drives[i] = config_found(&atabus_sc->sc_dev,
		    &adev, ataprint);
		if (chp->ata_drives[i] != NULL)
			ata_probe_caps(&chp->ch_drive[i]);
		else
			chp->ch_drive[i].drive_flags &=
			    ~(DRIVE_ATA | DRIVE_OLD);
	}

	/* now that we know the drives, the controller can set its modes */
	if (wdc->cap & WDC_CAPABILITY_MODE) {
		wdc->set_modes(chp);
		ata_print_modes(chp);
	}
#if NATARAID > 0
	if (wdc->cap & WDC_CAPABILITY_RAID)
		for (i = 0; i < 2; i++)
			if (chp->ata_drives[i] != NULL)
				ata_raid_check_component(chp->ata_drives[i]);
#endif /* NATARAID > 0 */

	/*
	 * reset drive_flags for unattached devices, reset state for attached
	 *  ones
	 */
	for (i = 0; i < 2; i++) {
		if (chp->ch_drive[i].drv_softc == NULL)
			chp->ch_drive[i].drive_flags = 0;
		else
			chp->ch_drive[i].state = 0;
	}

 out:
	if (atabus_initq == NULL) {
		simple_lock(&atabus_interlock);
		while(1) {
			atabus_initq = TAILQ_FIRST(&atabus_initq_head);
			if (atabus_initq->atabus_sc == atabus_sc)
				break;
			ltsleep(&atabus_initq_head, PRIBIO, "ata_initq", 0,
			    &atabus_interlock);
		}
		simple_unlock(&atabus_interlock);
	}
        simple_lock(&atabus_interlock);
        TAILQ_REMOVE(&atabus_initq_head, atabus_initq, atabus_initq);
        simple_unlock(&atabus_interlock);

        free(atabus_initq, M_DEVBUF);
        wakeup(&atabus_initq_head);

	wdc_delref(chp);

	config_pending_decr();
}

int
wdcprobe(struct wdc_channel *chp)
{

	return (wdcprobe1(chp, 1));
}

static int
wdcprobe1(struct wdc_channel *chp, int poll)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	u_int8_t st0, st1, sc, sn, cl, ch;
	u_int8_t ret_value = 0x03;
	u_int8_t drive;
	int s;

	/*
	 * Sanity check to see if the wdc channel responds at all.
	 */

	s = splbio();
	if (wdc == NULL ||
	    (wdc->cap & WDC_CAPABILITY_NO_EXTRA_RESETS) == 0) {

		if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
			wdc->select(chp,0);

		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
		    WDSD_IBM);
		delay(10);	/* 400ns delay */
		st0 = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_status], 0);
		
		if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
			wdc->select(chp,1);

		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
		    WDSD_IBM | 0x10);
		delay(10);	/* 400ns delay */
		st1 = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_status], 0);

		WDCDEBUG_PRINT(("%s:%d: before reset, st0=0x%x, st1=0x%x\n",
		    wdc != NULL ? wdc->sc_dev.dv_xname : "wdcprobe",
		    chp->ch_channel, st0, st1), DEBUG_PROBE);

		if (st0 == 0xff || st0 == WDSD_IBM)
			ret_value &= ~0x01;
		if (st1 == 0xff || st1 == (WDSD_IBM | 0x10))
			ret_value &= ~0x02;
		/* Register writability test, drive 0. */
		if (ret_value & 0x01) {
			if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
				wdc->select(chp,0);
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
			    0, WDSD_IBM);
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0, 0x02);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			if (cl != 0x02) {
				WDCDEBUG_PRINT(("%s:%d drive 0 wd_cyl_lo: "
				    "got 0x%x != 0x02\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x01;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0, 0x01);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			if (cl != 0x01) {
				WDCDEBUG_PRINT(("%s:%d drive 0 wd_cyl_lo: "
				    "got 0x%x != 0x01\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x01;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0, 0x01);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0);
			if (cl != 0x01) {
				WDCDEBUG_PRINT(("%s:%d drive 0 wd_sector: "
				    "got 0x%x != 0x01\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x01;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0, 0x02);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0);
			if (cl != 0x02) {
				WDCDEBUG_PRINT(("%s:%d drive 0 wd_sector: "
				    "got 0x%x != 0x02\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x01;
			}
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			if (cl != 0x01) {
				WDCDEBUG_PRINT(("%s:%d drive 0 wd_cyl_lo(2): "
				    "got 0x%x != 0x01\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x01;
			}
		}
		/* Register writability test, drive 1. */
		if (ret_value & 0x02) {
			if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
			     wdc->select(chp,1);
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
			     0, WDSD_IBM | 0x10);
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0, 0x02);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			if (cl != 0x02) {
				WDCDEBUG_PRINT(("%s:%d drive 1 wd_cyl_lo: "
				    "got 0x%x != 0x02\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x02;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0, 0x01);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			if (cl != 0x01) {
				WDCDEBUG_PRINT(("%s:%d drive 1 wd_cyl_lo: "
				    "got 0x%x != 0x01\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x02;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0, 0x01);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0);
			if (cl != 0x01) {
				WDCDEBUG_PRINT(("%s:%d drive 1 wd_sector: "
				    "got 0x%x != 0x01\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x02;
			}
			bus_space_write_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0, 0x02);
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0);
			if (cl != 0x02) {
				WDCDEBUG_PRINT(("%s:%d drive 1 wd_sector: "
				    "got 0x%x != 0x02\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x02;
			}
			cl = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			if (cl != 0x01) {
				WDCDEBUG_PRINT(("%s:%d drive 1 wd_cyl_lo(2): "
				    "got 0x%x != 0x01\n",
				    wdc != NULL ?
				    wdc->sc_dev.dv_xname : "wdcprobe",
				    chp->ch_channel, cl),
				    DEBUG_PROBE);
				ret_value &= ~0x02;
			}
		}

		if (ret_value == 0) {
			splx(s);
			return 0;
		}
	}


#if 0 /* XXX this break some ATA or ATAPI devices */
	/*
	 * reset bus. Also send an ATAPI_RESET to devices, in case there are
	 * ATAPI device out there which don't react to the bus reset
	 */
	if (ret_value & 0x01) {
		if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
			wdc->select(chp,0);
		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
		     0, WDSD_IBM);
		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_command], 0,
		    ATAPI_SOFT_RESET);
	}
	if (ret_value & 0x02) {
		if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
			wdc->select(chp,0);
		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
		     0, WDSD_IBM | 0x10);
		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_command], 0,
		    ATAPI_SOFT_RESET);
	}

	delay(5000);
#endif

	if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_SELECT))
		wdc->select(chp,0);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0, WDSD_IBM);
	delay(10);	/* 400ns delay */
	/* assert SRST, wait for reset to complete */
	bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr,
	    WDCTL_RST | WDCTL_IDS | WDCTL_4BIT); 
	DELAY(1000);
	bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr,
	    WDCTL_IDS | WDCTL_4BIT);
	DELAY(2000);
	(void) bus_space_read_1(chp->cmd_iot, chp->cmd_iohs[wd_error], 0);
	bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr, WDCTL_4BIT);
	delay(10);	/* 400ns delay */
	/* ACK interrupt in case there is one pending left (Promise ATA100) */
	if (wdc != NULL && (wdc->cap & WDC_CAPABILITY_IRQACK))
		wdc->irqack(chp);
	splx(s);

	ret_value = __wdcwait_reset(chp, ret_value, poll);
	WDCDEBUG_PRINT(("%s:%d: after reset, ret_value=0x%d\n",
	    wdc != NULL ? wdc->sc_dev.dv_xname : "wdcprobe", chp->ch_channel,
	    ret_value), DEBUG_PROBE);

	/* if reset failed, there's nothing here */
	if (ret_value == 0)
		return 0;

	/*
	 * Test presence of drives. First test register signatures looking
	 * for ATAPI devices. If it's not an ATAPI and reset said there may
	 * be something here assume it's ATA or OLD.  Ghost will be killed
	 * later in attach routine.
	 */
	for (drive = 0; drive < 2; drive++) {
		if ((ret_value & (0x01 << drive)) == 0)
			continue;
		if (wdc != NULL && wdc->cap & WDC_CAPABILITY_SELECT)
			wdc->select(chp,drive);
		bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
		    WDSD_IBM | (drive << 4));
		delay(10);	/* 400ns delay */
		/* Save registers contents */
		sc = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_seccnt], 0);
		sn = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_sector], 0);
		cl = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_cyl_lo], 0);
		ch = bus_space_read_1(chp->cmd_iot,
		     chp->cmd_iohs[wd_cyl_hi], 0);

		WDCDEBUG_PRINT(("%s:%d:%d: after reset, sc=0x%x sn=0x%x "
		    "cl=0x%x ch=0x%x\n",
		    wdc != NULL ? wdc->sc_dev.dv_xname : "wdcprobe",
	    	    chp->ch_channel, drive, sc, sn, cl, ch), DEBUG_PROBE);
		/*
		 * sc & sn are supposted to be 0x1 for ATAPI but in some cases
		 * we get wrong values here, so ignore it.
		 */
		if (cl == 0x14 && ch == 0xeb) {
			chp->ch_drive[drive].drive_flags |= DRIVE_ATAPI;
		} else {
			chp->ch_drive[drive].drive_flags |= DRIVE_ATA;
			if (wdc == NULL ||
			    (wdc->cap & WDC_CAPABILITY_PREATA) != 0)
				chp->ch_drive[drive].drive_flags |= DRIVE_OLD;
		}
	}
	return (ret_value);	
}

void
wdcattach(struct wdc_channel *chp)
{
	struct wdc_softc *wdc = chp->ch_wdc;

	if (chp->ch_flags & WDCF_DISABLED)
		return;

	/* default data transfer methods */
	if (!wdc->datain_pio)
		wdc->datain_pio = wdc_datain_pio;
	if (!wdc->dataout_pio)
		wdc->dataout_pio = wdc_dataout_pio;

	/* initialise global data */
	callout_init(&chp->ch_callout);
	if (wdc->drv_probe == NULL)
		wdc->drv_probe = wdc_drvprobe;

	TAILQ_INIT(&chp->ch_queue->queue_xfer);
	chp->ch_queue->queue_freeze = 0;
	chp->ch_queue->active_xfer = NULL;

	chp->atabus = config_found(&wdc->sc_dev, chp, atabusprint);
}

int
wdcactivate(struct device *self, enum devact act)
{
	struct wdc_softc *wdc = (struct wdc_softc *)self;
	int s, i, error = 0;

	s = splbio();
	switch (act) {
	case DVACT_ACTIVATE:
		error = EOPNOTSUPP;
		break;

	case DVACT_DEACTIVATE:
		for (i = 0; i < wdc->nchannels; i++) {
			error = config_deactivate(wdc->channels[i]->atabus);
			if (error)
				break;
		}
		break;
	}
	splx(s);
	return (error);
}
	
int
wdcdetach(struct device *self, int flags)
{
	struct wdc_softc *wdc = (struct wdc_softc *)self;
	struct wdc_channel *chp;
	struct scsipi_adapter *adapt = &wdc->sc_atapi_adapter._generic;
	int i, error = 0;

	for (i = 0; i < wdc->nchannels; i++) {
		chp = wdc->channels[i];
		WDCDEBUG_PRINT(("wdcdetach: %s: detaching %s\n",
		    wdc->sc_dev.dv_xname, chp->atabus->dv_xname), DEBUG_DETACH);
		error = config_detach(chp->atabus, flags);
		if (error)
			break;
	}
	if (adapt->adapt_refcnt != 0) {
#ifdef DIAGNOSTIC
		printf("wdcdetach: refcnt should be 0 here??\n");
#endif
		(void) (*adapt->adapt_enable)(&wdc->sc_dev, 0);
	}
	return (error);
}

/*
 * Start I/O on a controller, for the given channel.
 * The first xfer may be not for our channel if the channel queues
 * are shared.
 */
void
wdcstart(struct wdc_channel *chp)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_xfer *xfer;

#ifdef WDC_DIAGNOSTIC
	int spl1, spl2;

	spl1 = splbio();
	spl2 = splbio();
	if (spl2 != spl1) {
		printf("wdcstart: not at splbio()\n");
		panic("wdcstart");
	}
	splx(spl2);
	splx(spl1);
#endif /* WDC_DIAGNOSTIC */

	/* is there a xfer ? */
	if ((xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer)) == NULL)
		return;

	/* adjust chp, in case we have a shared queue */
	chp = xfer->c_chp;

	if (chp->ch_queue->active_xfer != NULL) {
		return; /* channel aleady active */
	}
	if (__predict_false(chp->ch_queue->queue_freeze > 0)) {
		return; /* queue froozen */
	}
#ifdef DIAGNOSTIC
	if ((chp->ch_flags & WDCF_IRQ_WAIT) != 0)
		panic("wdcstart: channel waiting for irq");
#endif
	if (wdc->cap & WDC_CAPABILITY_HWLOCK)
		if (!(*wdc->claim_hw)(chp, 0))
			return;

	WDCDEBUG_PRINT(("wdcstart: xfer %p channel %d drive %d\n", xfer,
	    chp->ch_channel, xfer->c_drive), DEBUG_XFERS);
	if (chp->ch_drive[xfer->c_drive].drive_flags & DRIVE_RESET) {
		chp->ch_drive[xfer->c_drive].drive_flags &= ~DRIVE_RESET;
		chp->ch_drive[xfer->c_drive].state = 0;
	}
	chp->ch_queue->active_xfer = xfer;
	TAILQ_REMOVE(&chp->ch_queue->queue_xfer, xfer, c_xferchain);
	
	if (wdc->cap & WDC_CAPABILITY_NOIRQ)
		KASSERT(xfer->c_flags & C_POLL);
	xfer->c_start(chp, xfer);
}

/* restart an interrupted I/O */
void
wdcrestart(void *v)
{
	struct wdc_channel *chp = v;
	int s;

	s = splbio();
	wdcstart(chp);
	splx(s);
}
	

/*
 * Interrupt routine for the controller.  Acknowledge the interrupt, check for
 * errors on the current operation, mark it done if necessary, and start the
 * next request.  Also check for a partially done transfer, and continue with
 * the next chunk if so.
 */
int
wdcintr(void *arg)
{
	struct wdc_channel *chp = arg;
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_xfer *xfer;
	int ret;

	if ((wdc->sc_dev.dv_flags & DVF_ACTIVE) == 0) {
		WDCDEBUG_PRINT(("wdcintr: deactivated controller\n"),
		    DEBUG_INTR);
		return (0);
	}
	if ((chp->ch_flags & WDCF_IRQ_WAIT) == 0) {
		WDCDEBUG_PRINT(("wdcintr: inactive controller\n"), DEBUG_INTR);
		/* try to clear the pending interrupt anyway */
		(void)bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_status], 0);
		return (0);
	}

	WDCDEBUG_PRINT(("wdcintr\n"), DEBUG_INTR);
	xfer = chp->ch_queue->active_xfer;
#ifdef DIAGNOSTIC
	if (xfer == NULL)
		panic("wdcintr: no xfer");
#endif
	if (chp->ch_flags & WDCF_DMA_WAIT) {
		wdc->dma_status =
		    (*wdc->dma_finish)(wdc->dma_arg, chp->ch_channel,
			xfer->c_drive, WDC_DMAEND_END);
		if (wdc->dma_status & WDC_DMAST_NOIRQ) {
			/* IRQ not for us, not detected by DMA engine */
			return 0;
		}
		chp->ch_flags &= ~WDCF_DMA_WAIT;
	}
	chp->ch_flags &= ~WDCF_IRQ_WAIT;
	ret = xfer->c_intr(chp, xfer, 1);
	if (ret == 0) /* irq was not for us, still waiting for irq */
		chp->ch_flags |= WDCF_IRQ_WAIT;
	return (ret);
}

/* Put all disk in RESET state */
void
wdc_reset_drive(struct ata_drive_datas *drvp, int flags)
{
	struct wdc_channel *chp = drvp->chnl_softc;
	struct wdc_softc *wdc = chp->ch_wdc;
	WDCDEBUG_PRINT(("ata_reset_channel %s:%d for drive %d\n",
	    wdc->sc_dev.dv_xname, chp->ch_channel, drvp->drive),
	    DEBUG_FUNCS);


	wdc_reset_channel(chp, flags);
}

void
wdc_reset_channel(struct wdc_channel *chp, int flags)
{
	TAILQ_HEAD(, ata_xfer) reset_xfer;
	struct ata_xfer *xfer, *next_xfer;
	int drive;

	chp->ch_queue->queue_freeze++;
	TAILQ_INIT(&reset_xfer);

	/* if we can poll or wait it's OK, otherwise wake up the kernel
	 * thread
	 */
	if ((flags & (AT_POLL | AT_WAIT)) == 0) {
		if (chp->ch_flags & WDCF_TH_RESET) {
			/* no need to schedule a reset more than one time */
			return;
		}
		chp->ch_flags |= WDCF_TH_RESET;
		chp->ch_reset_flags = flags & (AT_RST_EMERG | AT_RST_NOCMD);
		wakeup(&chp->ch_thread);
		return;
	}

	chp->ch_flags &= ~WDCF_IRQ_WAIT;
	/*
	 * if the current command if on an ATAPI device, issue a
	 * ATAPI_SOFT_RESET
	 */
	xfer = chp->ch_queue->active_xfer;
	if (xfer && xfer->c_chp == chp && (xfer->c_flags & C_ATAPI)) {
		wdccommandshort(chp, xfer->c_drive, ATAPI_SOFT_RESET);
		if (flags & AT_WAIT)
			tsleep(&flags, PRIBIO, "atardl", mstohz(1) + 1);
		else 
			delay(1000);
	}

	/* reset the channel */
	if (flags & AT_WAIT)
		(void) wdcreset(chp, RESET_SLEEP);
	else
		(void) wdcreset(chp, RESET_POLL);

	/*
	 * wait a bit after reset; in case the DMA engines needs some time
	 * to recover.
	 */
	if (flags & AT_WAIT)
		tsleep(&flags, PRIBIO, "atardl", mstohz(1) + 1);
	else 
		delay(1000);
	/*
	 * look for pending xfers. If we have a shared queue, we'll also reset
	 * the other channel if the current xfer is running on it.
	 * Then we'll dequeue only the xfers for this channel.
	 */
	if ((flags & AT_RST_NOCMD) == 0) {
		/*
		 * move all xfers queued for this channel to the reset queue,
		 * and then process the current xfer and then the reset queue.
		 * We have to use a temporary queue because c_kill_xfer()
		 * may requeue commands.
		 */
		for (xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer);
		    xfer != NULL; xfer = next_xfer) {
			next_xfer = TAILQ_NEXT(xfer, c_xferchain);
			if (xfer->c_chp != chp)
				continue;
			TAILQ_REMOVE(&chp->ch_queue->queue_xfer,
			    xfer, c_xferchain);
			TAILQ_INSERT_TAIL(&reset_xfer, xfer, c_xferchain);
		}
		xfer = chp->ch_queue->active_xfer;
		if (xfer) {
			if (xfer->c_chp != chp)
				wdc_reset_channel(xfer->c_chp, flags);
			else {
				callout_stop(&chp->ch_callout);
				/*
				 * If we're waiting for DMA, stop the
				 * DMA engine
				 */
				if (chp->ch_flags & WDCF_DMA_WAIT) {
					(*chp->ch_wdc->dma_finish)(
					    chp->ch_wdc->dma_arg,
					    chp->ch_channel,
					    xfer->c_drive,
					    WDC_DMAEND_ABRT_QUIET);
					chp->ch_flags &= ~WDCF_DMA_WAIT;
				}
				chp->ch_queue->active_xfer = NULL;
				if ((flags & AT_RST_EMERG) == 0)
					xfer->c_kill_xfer(
					    chp, xfer, KILL_RESET);
			}
		}

		for (xfer = TAILQ_FIRST(&reset_xfer);
		    xfer != NULL; xfer = next_xfer) {
			next_xfer = TAILQ_NEXT(xfer, c_xferchain);
			TAILQ_REMOVE(&reset_xfer, xfer, c_xferchain);
			if ((flags & AT_RST_EMERG) == 0)
				xfer->c_kill_xfer(chp, xfer, KILL_RESET);
		}
	}
	for (drive = 0; drive < 2; drive++) {
		chp->ch_drive[drive].state = 0;
	}
	chp->ch_flags &= ~WDCF_TH_RESET;
	if ((flags & AT_RST_EMERG) == 0)  {
		chp->ch_queue->queue_freeze--;
		wdcstart(chp);
	} else {
		/* make sure that we can use polled commands */
		TAILQ_INIT(&chp->ch_queue->queue_xfer);
		chp->ch_queue->queue_freeze = 0;
		chp->ch_queue->active_xfer = NULL;
	}
}

int
wdcreset(struct wdc_channel *chp, int poll)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	int drv_mask1, drv_mask2;
	int s = 0;

	if (wdc->cap & WDC_CAPABILITY_SELECT)
		wdc->select(chp,0);
	if (poll != RESET_SLEEP)
		s = splbio();
	/* master */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0, WDSD_IBM);
	delay(10);	/* 400ns delay */
	bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr,
	    WDCTL_RST | WDCTL_IDS | WDCTL_4BIT);
	delay(2000);
	(void) bus_space_read_1(chp->cmd_iot, chp->cmd_iohs[wd_error], 0);
	bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr,
	    WDCTL_4BIT | WDCTL_IDS);
	delay(10);	/* 400ns delay */
	if (poll != RESET_SLEEP) {
		if (wdc->cap & WDC_CAPABILITY_IRQACK)
			wdc->irqack(chp);
		splx(s);
	}

	drv_mask1 = (chp->ch_drive[0].drive_flags & DRIVE) ? 0x01:0x00;
	drv_mask1 |= (chp->ch_drive[1].drive_flags & DRIVE) ? 0x02:0x00;
	drv_mask2 = __wdcwait_reset(chp, drv_mask1,
	    (poll == RESET_SLEEP) ? 0 : 1);
	if (drv_mask2 != drv_mask1) {
		printf("%s channel %d: reset failed for",
		    wdc->sc_dev.dv_xname, chp->ch_channel);
		if ((drv_mask1 & 0x01) != 0 && (drv_mask2 & 0x01) == 0)
			printf(" drive 0");
		if ((drv_mask1 & 0x02) != 0 && (drv_mask2 & 0x02) == 0)
			printf(" drive 1");
		printf("\n");
	}
	bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr, WDCTL_4BIT);
	return  (drv_mask1 != drv_mask2) ? 1 : 0;
}

static int
__wdcwait_reset(struct wdc_channel *chp, int drv_mask, int poll)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	int timeout, nloop;
	u_int8_t st0 = 0, st1 = 0;
#ifdef WDCDEBUG
	u_int8_t sc0 = 0, sn0 = 0, cl0 = 0, ch0 = 0;
	u_int8_t sc1 = 0, sn1 = 0, cl1 = 0, ch1 = 0;
#endif

	if (poll)
		nloop = WDCNDELAY_RST;
	else
		nloop = WDC_RESET_WAIT * hz / 1000;
	/* wait for BSY to deassert */
	for (timeout = 0; timeout < nloop; timeout++) {
		if ((drv_mask & 0x01) != 0) {
			if (wdc && wdc->cap & WDC_CAPABILITY_SELECT)
				wdc->select(chp,0);
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
			    0, WDSD_IBM); /* master */
			delay(10);
			st0 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_status], 0);
#ifdef WDCDEBUG
			sc0 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_seccnt], 0);
			sn0 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0);
			cl0 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			ch0 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_hi], 0);
#endif
		}
		if ((drv_mask & 0x02) != 0) {
			if (wdc && wdc->cap & WDC_CAPABILITY_SELECT)
				wdc->select(chp,1);
			bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh],
			    0, WDSD_IBM | 0x10); /* slave */
			delay(10);
			st1 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_status], 0);
#ifdef WDCDEBUG
			sc1 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_seccnt], 0);
			sn1 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_sector], 0);
			cl1 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_lo], 0);
			ch1 = bus_space_read_1(chp->cmd_iot,
			    chp->cmd_iohs[wd_cyl_hi], 0);
#endif
		}

		if ((drv_mask & 0x01) == 0) {
			/* no master */
			if ((drv_mask & 0x02) != 0 && (st1 & WDCS_BSY) == 0) {
				/* No master, slave is ready, it's done */
				goto end;
			}
		} else if ((drv_mask & 0x02) == 0) {
			/* no slave */
			if ((drv_mask & 0x01) != 0 && (st0 & WDCS_BSY) == 0) {
				/* No slave, master is ready, it's done */
				goto end;
			}
		} else {
			/* Wait for both master and slave to be ready */
			if ((st0 & WDCS_BSY) == 0 && (st1 & WDCS_BSY) == 0) {
				goto end;
			}
		}
		if (poll)
			delay(WDCDELAY);
		else
			tsleep(&nloop, PRIBIO, "atarst", 1);
	}
	/* Reset timed out. Maybe it's because drv_mask was not right */
	if (st0 & WDCS_BSY)
		drv_mask &= ~0x01;
	if (st1 & WDCS_BSY)
		drv_mask &= ~0x02;
end:
	WDCDEBUG_PRINT(("%s:%d:0: after reset, sc=0x%x sn=0x%x "
	    "cl=0x%x ch=0x%x\n",
	     wdc != NULL ? wdc->sc_dev.dv_xname : "wdcprobe",
	     chp->ch_channel, sc0, sn0, cl0, ch0), DEBUG_PROBE);
	WDCDEBUG_PRINT(("%s:%d:1: after reset, sc=0x%x sn=0x%x "
	    "cl=0x%x ch=0x%x\n",
	     wdc != NULL ? wdc->sc_dev.dv_xname : "wdcprobe",
	     chp->ch_channel, sc1, sn1, cl1, ch1), DEBUG_PROBE);

	WDCDEBUG_PRINT(("%s:%d: wdcwait_reset() end, st0=0x%x st1=0x%x\n",
	    wdc != NULL ? wdc->sc_dev.dv_xname : "wdcprobe", chp->ch_channel,
	    st0, st1), DEBUG_PROBE);

	return drv_mask;
}

/*
 * Wait for a drive to be !BSY, and have mask in its status register.
 * return -1 for a timeout after "timeout" ms.
 */
static int
__wdcwait(struct wdc_channel *chp, int mask, int bits, int timeout)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	u_char status;
	int time = 0;

	WDCDEBUG_PRINT(("__wdcwait %s:%d\n", wdc != NULL ?
			wdc->sc_dev.dv_xname : "none",
			chp->ch_channel), DEBUG_STATUS);
	chp->ch_error = 0;

	timeout = timeout * 1000 / WDCDELAY; /* delay uses microseconds */

	for (;;) {
		chp->ch_status = status =
		    bus_space_read_1(chp->cmd_iot, chp->cmd_iohs[wd_status], 0);
		if ((status & (WDCS_BSY | mask)) == bits)
			break;
		if (++time > timeout) {
			WDCDEBUG_PRINT(("__wdcwait: timeout (time=%d), "
			    "status %x error %x (mask 0x%x bits 0x%x)\n",
			    time, status,
			    bus_space_read_1(chp->cmd_iot,
				chp->cmd_iohs[wd_error], 0), mask, bits),
			    DEBUG_STATUS | DEBUG_PROBE | DEBUG_DELAY);
			return(WDCWAIT_TOUT);
		}
		delay(WDCDELAY);
	}
#ifdef WDCDEBUG
	if (time > 0 && (wdcdebug_mask & DEBUG_DELAY))
		printf("__wdcwait: did busy-wait, time=%d\n", time);
#endif
	if (status & WDCS_ERR)
		chp->ch_error = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_error], 0);
#ifdef WDCNDELAY_DEBUG
	/* After autoconfig, there should be no long delays. */
	if (!cold && time > WDCNDELAY_DEBUG) {
		struct ata_xfer *xfer = chp->ch_queue->active_xfer;
		if (xfer == NULL)
			printf("%s channel %d: warning: busy-wait took %dus\n",
			    wdc->sc_dev.dv_xname, chp->ch_channel,
			    WDCDELAY * time);
		else 
			printf("%s:%d:%d: warning: busy-wait took %dus\n",
			    wdc->sc_dev.dv_xname, chp->ch_channel,
			    xfer->drive,
			    WDCDELAY * time);
	}
#endif
	return(WDCWAIT_OK);
}

/*
 * Call __wdcwait(), polling using tsleep() or waking up the kernel
 * thread if possible
 */
int
wdcwait(struct wdc_channel *chp, int mask, int bits, int timeout, int flags)
{
	int error, i, timeout_hz = mstohz(timeout);

	if (timeout_hz == 0 ||
	    (flags & (AT_WAIT | AT_POLL)) == AT_POLL)
		error = __wdcwait(chp, mask, bits, timeout);
	else {
		error = __wdcwait(chp, mask, bits, WDCDELAY_POLL);
		if (error != 0) {
			if ((chp->ch_flags & WDCF_TH_RUN) ||
			    (flags & AT_WAIT)) {
				/*
				 * we're running in the channel thread
				 * or some userland thread context
				 */
				for (i = 0; i < timeout_hz; i++) {
					if (__wdcwait(chp, mask, bits,
					    WDCDELAY_POLL) == 0) {
						error = 0;
						break;
					}
					tsleep(&chp, PRIBIO, "atapoll", 1);
				}
			} else {
				/*
				 * we're probably in interrupt context,
				 * ask the thread to come back here
				 */
#ifdef DIAGNOSTIC
				if (chp->ch_queue->queue_freeze > 0)
					panic("wdcwait: queue_freeze");
#endif
				chp->ch_queue->queue_freeze++;
				wakeup(&chp->ch_thread);
				return(WDCWAIT_THR);
			}
		}
	}
	return (error);
}


/*
 * Busy-wait for DMA to complete
 */
int
wdc_dmawait(struct wdc_channel *chp, struct ata_xfer *xfer, int timeout)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	int time;

	for (time = 0;  time < timeout * 1000 / WDCDELAY; time++) {
		wdc->dma_status =
		    (*wdc->dma_finish)(wdc->dma_arg,
			chp->ch_channel, xfer->c_drive, WDC_DMAEND_END);
		if ((wdc->dma_status & WDC_DMAST_NOIRQ) == 0)
			return 0;
		delay(WDCDELAY);
	}
	/* timeout, force a DMA halt */
	wdc->dma_status = (*wdc->dma_finish)(wdc->dma_arg,
	    chp->ch_channel, xfer->c_drive, WDC_DMAEND_ABRT);
	return 1;
}

void
wdctimeout(void *arg)
{
	struct wdc_channel *chp = (struct wdc_channel *)arg;
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_xfer *xfer = chp->ch_queue->active_xfer;
	int s;

	WDCDEBUG_PRINT(("wdctimeout\n"), DEBUG_FUNCS);

	s = splbio();
	if ((chp->ch_flags & WDCF_IRQ_WAIT) != 0) {
		__wdcerror(chp, "lost interrupt");
		printf("\ttype: %s tc_bcount: %d tc_skip: %d\n",
		    (xfer->c_flags & C_ATAPI) ?  "atapi" : "ata",
		    xfer->c_bcount,
		    xfer->c_skip);
		if (chp->ch_flags & WDCF_DMA_WAIT) {
			wdc->dma_status =
			    (*wdc->dma_finish)(wdc->dma_arg,
				chp->ch_channel, xfer->c_drive,
				WDC_DMAEND_ABRT);
			chp->ch_flags &= ~WDCF_DMA_WAIT;
		}
		/*
		 * Call the interrupt routine. If we just missed an interrupt,
		 * it will do what's needed. Else, it will take the needed
		 * action (reset the device).
		 * Before that we need to reinstall the timeout callback,
		 * in case it will miss another irq while in this transfer
		 * We arbitray chose it to be 1s
		 */
		callout_reset(&chp->ch_callout, hz, wdctimeout, chp);
		xfer->c_flags |= C_TIMEOU;
		chp->ch_flags &= ~WDCF_IRQ_WAIT;
		xfer->c_intr(chp, xfer, 1);
	} else
		__wdcerror(chp, "missing untimeout");
	splx(s);
}

int
wdc_exec_command(struct ata_drive_datas *drvp, struct ata_command *ata_c)
{
	struct wdc_channel *chp = drvp->chnl_softc;
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_xfer *xfer;
	int s, ret;

	WDCDEBUG_PRINT(("wdc_exec_command %s:%d:%d\n",
	    wdc->sc_dev.dv_xname, chp->ch_channel, drvp->drive),
	    DEBUG_FUNCS);

	/* set up an xfer and queue. Wait for completion */
	xfer = ata_get_xfer(ata_c->flags & AT_WAIT ? ATAXF_CANSLEEP :
	    ATAXF_NOSLEEP);
	if (xfer == NULL) {
		return ATACMD_TRY_AGAIN;
	 }

	if (wdc->cap & WDC_CAPABILITY_NOIRQ)
		ata_c->flags |= AT_POLL;
	if (ata_c->flags & AT_POLL)
		xfer->c_flags |= C_POLL;
	xfer->c_drive = drvp->drive;
	xfer->c_databuf = ata_c->data;
	xfer->c_bcount = ata_c->bcount;
	xfer->c_cmd = ata_c;
	xfer->c_start = __wdccommand_start;
	xfer->c_intr = __wdccommand_intr;
	xfer->c_kill_xfer = __wdccommand_kill_xfer;

	s = splbio();
	wdc_exec_xfer(chp, xfer);
#ifdef DIAGNOSTIC
	if ((ata_c->flags & AT_POLL) != 0 &&
	    (ata_c->flags & AT_DONE) == 0)
		panic("wdc_exec_command: polled command not done");
#endif
	if (ata_c->flags & AT_DONE) {
		ret = ATACMD_COMPLETE;
	} else {
		if (ata_c->flags & AT_WAIT) {
			while ((ata_c->flags & AT_DONE) == 0) {
				tsleep(ata_c, PRIBIO, "wdccmd", 0);
			}
			ret = ATACMD_COMPLETE;
		} else {
			ret = ATACMD_QUEUED;
		}
	}
	splx(s);
	return ret;
}

static void
__wdccommand_start(struct wdc_channel *chp, struct ata_xfer *xfer)
{   
	struct wdc_softc *wdc = chp->ch_wdc;
	int drive = xfer->c_drive;
	struct ata_command *ata_c = xfer->c_cmd;

	WDCDEBUG_PRINT(("__wdccommand_start %s:%d:%d\n",
	    wdc->sc_dev.dv_xname, chp->ch_channel, xfer->c_drive),
	    DEBUG_FUNCS);

	if (wdc->cap & WDC_CAPABILITY_SELECT)
		wdc->select(chp,drive);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
	    WDSD_IBM | (drive << 4));
	switch(wdcwait(chp, ata_c->r_st_bmask | WDCS_DRQ,
	    ata_c->r_st_bmask, ata_c->timeout, ata_c->flags)) {
	case WDCWAIT_OK:
		break;
	case WDCWAIT_TOUT:
		ata_c->flags |= AT_TIMEOU;
		__wdccommand_done(chp, xfer);
		return;
	case WDCWAIT_THR:
		return;
	}
	if (ata_c->flags & AT_POLL) {
		/* polled command, disable interrupts */
		bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr,
		    WDCTL_4BIT | WDCTL_IDS);
	}
	wdccommand(chp, drive, ata_c->r_command, ata_c->r_cyl, ata_c->r_head,
	    ata_c->r_sector, ata_c->r_count, ata_c->r_features);

	if ((ata_c->flags & AT_POLL) == 0) {
		chp->ch_flags |= WDCF_IRQ_WAIT; /* wait for interrupt */
		callout_reset(&chp->ch_callout, ata_c->timeout / 1000 * hz,
		    wdctimeout, chp);
		return;
	}
	/*
	 * Polled command. Wait for drive ready or drq. Done in intr().
	 * Wait for at last 400ns for status bit to be valid.
	 */
	delay(10);	/* 400ns delay */
	__wdccommand_intr(chp, xfer, 0);
}

static int
__wdccommand_intr(struct wdc_channel *chp, struct ata_xfer *xfer, int irq)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_command *ata_c = xfer->c_cmd;
	int bcount = ata_c->bcount;
	char *data = ata_c->data;
	int wflags;

	if ((ata_c->flags & (AT_WAIT | AT_POLL)) == (AT_WAIT | AT_POLL)) {
		/* both wait and poll, we can tsleep here */
		wflags = AT_WAIT | AT_POLL;
	} else {
		wflags = AT_POLL;
	}

 again:
	WDCDEBUG_PRINT(("__wdccommand_intr %s:%d:%d\n",
	    wdc->sc_dev.dv_xname, chp->ch_channel, xfer->c_drive),
	    DEBUG_INTR);
	/*
	 * after a ATAPI_SOFT_RESET, the device will have released the bus.
	 * Reselect again, it doesn't hurt for others commands, and the time
	 * penalty for the extra regiter write is acceptable,
	 * wdc_exec_command() isn't called often (mosly for autoconfig)
	 */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
	    WDSD_IBM | (xfer->c_drive << 4));
	if ((ata_c->flags & AT_XFDONE) != 0) {
		/*
		 * We have completed a data xfer. The drive should now be
		 * in its initial state
		 */
		if (wdcwait(chp, ata_c->r_st_bmask | WDCS_DRQ,
		    ata_c->r_st_bmask, (irq == 0)  ? ata_c->timeout : 0,
		    wflags) ==  WDCWAIT_TOUT) {
			if (irq && (xfer->c_flags & C_TIMEOU) == 0) 
				return 0; /* IRQ was not for us */
			ata_c->flags |= AT_TIMEOU;
		}
		goto out;
	}
	if (wdcwait(chp, ata_c->r_st_pmask, ata_c->r_st_pmask,
	     (irq == 0)  ? ata_c->timeout : 0, wflags) == WDCWAIT_TOUT) {
		if (irq && (xfer->c_flags & C_TIMEOU) == 0) 
			return 0; /* IRQ was not for us */
		ata_c->flags |= AT_TIMEOU;
		goto out;
	}
	if (wdc->cap & WDC_CAPABILITY_IRQACK)
		wdc->irqack(chp);
	if (ata_c->flags & AT_READ) {
		if ((chp->ch_status & WDCS_DRQ) == 0) {
			ata_c->flags |= AT_TIMEOU;
			goto out;
		}
		if (chp->ch_drive[xfer->c_drive].drive_flags & DRIVE_CAP32) {
			bus_space_read_multi_4(chp->data32iot, chp->data32ioh,
			    0, (u_int32_t*)data, bcount >> 2);
			data += bcount & 0xfffffffc;
			bcount = bcount & 0x03;
		}
		if (bcount > 0)
			wdc->datain_pio(chp, DRIVE_NOSTREAM, data, bcount);
		/* at this point the drive should be in its initial state */
		ata_c->flags |= AT_XFDONE;
		/* XXX should read status register here ? */
	} else if (ata_c->flags & AT_WRITE) {
		if ((chp->ch_status & WDCS_DRQ) == 0) {
			ata_c->flags |= AT_TIMEOU;
			goto out;
		}
		if (chp->ch_drive[xfer->c_drive].drive_flags & DRIVE_CAP32) {
			bus_space_write_multi_4(chp->data32iot, chp->data32ioh,
			    0, (u_int32_t*)data, bcount >> 2);
			data += bcount & 0xfffffffc;
			bcount = bcount & 0x03;
		}
		if (bcount > 0)
			wdc->dataout_pio(chp, DRIVE_NOSTREAM, data, bcount);
		ata_c->flags |= AT_XFDONE;
		if ((ata_c->flags & AT_POLL) == 0) {
			chp->ch_flags |= WDCF_IRQ_WAIT; /* wait for interrupt */
			callout_reset(&chp->ch_callout,
			    ata_c->timeout / 1000 * hz, wdctimeout, chp);
			return 1;
		} else {
			goto again;
		}
	}
 out:
	__wdccommand_done(chp, xfer);
	return 1;
}

static void
__wdccommand_done(struct wdc_channel *chp, struct ata_xfer *xfer)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_command *ata_c = xfer->c_cmd;

	WDCDEBUG_PRINT(("__wdccommand_done %s:%d:%d\n",
	    wdc->sc_dev.dv_xname, chp->ch_channel, xfer->c_drive),
	    DEBUG_FUNCS);


	if (chp->ch_status & WDCS_DWF)
		ata_c->flags |= AT_DF;
	if (chp->ch_status & WDCS_ERR) {
		ata_c->flags |= AT_ERROR;
		ata_c->r_error = chp->ch_error;
	}
	if ((ata_c->flags & AT_READREG) != 0 &&
	    (wdc->sc_dev.dv_flags & DVF_ACTIVE) != 0 &&
	    (ata_c->flags & (AT_ERROR | AT_DF)) == 0) {
		ata_c->r_head = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_sdh], 0);
		ata_c->r_count = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_seccnt], 0);
		ata_c->r_sector = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_sector], 0);
		ata_c->r_cyl |= bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_cyl_lo], 0);
		ata_c->r_cyl = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_cyl_hi], 0) << 8;
		ata_c->r_error = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_error], 0);
		ata_c->r_features = bus_space_read_1(chp->cmd_iot,
		    chp->cmd_iohs[wd_features], 0);
	}
	callout_stop(&chp->ch_callout);
	chp->ch_queue->active_xfer = NULL;
	if (ata_c->flags & AT_POLL) {
		/* enable interrupts */
		bus_space_write_1(chp->ctl_iot, chp->ctl_ioh, wd_aux_ctlr,
		    WDCTL_4BIT);
		delay(10); /* some drives need a little delay here */
	}
	if (chp->ch_drive[xfer->c_drive].drive_flags & DRIVE_WAITDRAIN) {
		__wdccommand_kill_xfer(chp, xfer, KILL_GONE);
		chp->ch_drive[xfer->c_drive].drive_flags &= ~DRIVE_WAITDRAIN;
		wakeup(&chp->ch_queue->active_xfer);
	} else 
		__wdccommand_done_end(chp, xfer);
}
	
static void
__wdccommand_done_end(struct wdc_channel *chp, struct ata_xfer *xfer)
{
	struct ata_command *ata_c = xfer->c_cmd;

	ata_c->flags |= AT_DONE;
	ata_free_xfer(chp, xfer);
	if (ata_c->flags & AT_WAIT)
		wakeup(ata_c);
	else if (ata_c->callback)
		ata_c->callback(ata_c->callback_arg);
	wdcstart(chp);
	return;
}

static void
__wdccommand_kill_xfer(struct wdc_channel *chp, struct ata_xfer *xfer,
    int reason)
{
	struct ata_command *ata_c = xfer->c_cmd;

	switch (reason) {
	case KILL_GONE:
		ata_c->flags |= AT_GONE;
		break;                
	case KILL_RESET:
		ata_c->flags |= AT_RESET;
		break;
	default:
		printf("__wdccommand_kill_xfer: unknown reason %d\n",
		    reason);
		panic("__wdccommand_kill_xfer");
	}
	__wdccommand_done_end(chp, xfer);
}

/*
 * Send a command. The drive should be ready.
 * Assumes interrupts are blocked.
 */
void
wdccommand(struct wdc_channel *chp, u_int8_t drive, u_int8_t command,
    u_int16_t cylin, u_int8_t head, u_int8_t sector, u_int8_t count,
    u_int8_t features)
{
	struct wdc_softc *wdc = chp->ch_wdc;

	WDCDEBUG_PRINT(("wdccommand %s:%d:%d: command=0x%x cylin=%d head=%d "
	    "sector=%d count=%d features=%d\n", wdc->sc_dev.dv_xname,
	    chp->ch_channel, drive, command, cylin, head, sector, count,
	    features), DEBUG_FUNCS);

	if (wdc->cap & WDC_CAPABILITY_SELECT)
		wdc->select(chp,drive);

	/* Select drive, head, and addressing mode. */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
	    WDSD_IBM | (drive << 4) | head);
	/* Load parameters into the wd_features register. */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_features], 0,
	    features);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_seccnt], 0, count);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sector], 0, sector);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_cyl_lo], 0, cylin);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_cyl_hi],
	    0, cylin >> 8);

	/* Send command. */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_command], 0, command);
	return;
}

/*
 * Send a 48-bit addressing command. The drive should be ready.
 * Assumes interrupts are blocked.
 */
void
wdccommandext(struct wdc_channel *chp, u_int8_t drive, u_int8_t command,
    u_int64_t blkno, u_int16_t count)
{
	struct wdc_softc *wdc = chp->ch_wdc;

	WDCDEBUG_PRINT(("wdccommandext %s:%d:%d: command=0x%x blkno=%d "
	    "count=%d\n", wdc->sc_dev.dv_xname,
	    chp->ch_channel, drive, command, (u_int32_t) blkno, count),
	    DEBUG_FUNCS);

	if (wdc->cap & WDC_CAPABILITY_SELECT)
		wdc->select(chp,drive);

	/* Select drive, head, and addressing mode. */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
	    (drive << 4) | WDSD_LBA);

	/* previous */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_features], 0, 0);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_seccnt],
	    0, count >> 8);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_lba_lo],
	    0, blkno >> 24);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_lba_mi],
	    0, blkno >> 32);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_lba_hi],
	    0, blkno >> 40);

	/* current */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_features], 0, 0);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_seccnt], 0, count);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_lba_lo], 0, blkno);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_lba_mi],
	    0, blkno >> 8);
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_lba_hi],
	    0, blkno >> 16);

	/* Send command. */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_command], 0, command);
	return;
}

/*
 * Simplified version of wdccommand().  Unbusy/ready/drq must be
 * tested by the caller.
 */
void
wdccommandshort(struct wdc_channel *chp, int drive, int command)
{
	struct wdc_softc *wdc = chp->ch_wdc;

	WDCDEBUG_PRINT(("wdccommandshort %s:%d:%d command 0x%x\n",
	    wdc->sc_dev.dv_xname, chp->ch_channel, drive, command),
	    DEBUG_FUNCS);

	if (wdc->cap & WDC_CAPABILITY_SELECT)
		wdc->select(chp,drive);

	/* Select drive. */
	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_sdh], 0,
	    WDSD_IBM | (drive << 4));

	bus_space_write_1(chp->cmd_iot, chp->cmd_iohs[wd_command], 0, command);
}

/* Add a command to the queue and start controller. Must be called at splbio */
void
wdc_exec_xfer(struct wdc_channel *chp, struct ata_xfer *xfer)
{

	WDCDEBUG_PRINT(("wdc_exec_xfer %p channel %d drive %d\n", xfer,
	    chp->ch_channel, xfer->c_drive), DEBUG_XFERS);

	/* complete xfer setup */
	xfer->c_chp = chp;

	/* insert at the end of command list */
	TAILQ_INSERT_TAIL(&chp->ch_queue->queue_xfer, xfer, c_xferchain);
	WDCDEBUG_PRINT(("wdcstart from wdc_exec_xfer, flags 0x%x\n",
	    chp->ch_flags), DEBUG_XFERS);
	wdcstart(chp);
}

/*
 * Kill off all pending xfers for a wdc_channel.
 *
 * Must be called at splbio().
 */
void
wdc_kill_pending(struct ata_drive_datas *drvp)
{
	struct wdc_channel *chp = drvp->chnl_softc;
	struct ata_xfer *xfer, *next_xfer;
	int s = splbio();

	for (xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer);
	    xfer != NULL; xfer = next_xfer) {
		next_xfer = TAILQ_NEXT(xfer, c_xferchain);
		if (xfer->c_chp != chp || xfer->c_drive != drvp->drive)
			continue;
		TAILQ_REMOVE(&chp->ch_queue->queue_xfer, xfer, c_xferchain);
		(*xfer->c_kill_xfer)(chp, xfer, KILL_GONE);
	}

	while ((xfer = chp->ch_queue->active_xfer) != NULL) {
		if (xfer->c_chp == chp && xfer->c_drive == drvp->drive) {
			drvp->drive_flags |= DRIVE_WAITDRAIN;
			(void) tsleep(&chp->ch_queue->active_xfer,
			    PRIBIO, "atdrn", 0);
		} else {
			/* no more xfer for us */
			break;
		}
	}
	splx(s);
}

static void
__wdcerror(struct wdc_channel *chp, char *msg) 
{
	struct wdc_softc *wdc = chp->ch_wdc;
	struct ata_xfer *xfer = TAILQ_FIRST(&chp->ch_queue->queue_xfer);

	if (xfer == NULL)
		printf("%s:%d: %s\n", wdc->sc_dev.dv_xname, chp->ch_channel,
		    msg);
	else
		printf("%s:%d:%d: %s\n", wdc->sc_dev.dv_xname,
		    chp->ch_channel, xfer->c_drive, msg);
}

/* 
 * the bit bucket
 */
void
wdcbit_bucket(struct wdc_channel *chp, int size)
{

	for (; size >= 2; size -= 2)
		(void)bus_space_read_2(chp->cmd_iot, chp->cmd_iohs[wd_data], 0);
	if (size)
		(void)bus_space_read_1(chp->cmd_iot, chp->cmd_iohs[wd_data], 0);
}

int
wdc_addref(struct wdc_channel *chp)
{
	struct wdc_softc *wdc = chp->ch_wdc; 
	struct scsipi_adapter *adapt = &wdc->sc_atapi_adapter._generic;
	int s, error = 0;

	s = splbio();
	if (adapt->adapt_refcnt++ == 0 &&
	    adapt->adapt_enable != NULL) {
		error = (*adapt->adapt_enable)(&wdc->sc_dev, 1);
		if (error)
			adapt->adapt_refcnt--;
	}
	splx(s);
	return (error);
}

void
wdc_delref(struct wdc_channel *chp)
{
	struct wdc_softc *wdc = chp->ch_wdc;
	struct scsipi_adapter *adapt = &wdc->sc_atapi_adapter._generic;
	int s;

	s = splbio();
	if (adapt->adapt_refcnt-- == 1 &&
	    adapt->adapt_enable != NULL)
		(void) (*adapt->adapt_enable)(&wdc->sc_dev, 0);
	splx(s);
}

void
wdc_datain_pio(chp, flags, buf, len)
	struct wdc_channel *chp;
	int flags;
	void *buf;
	size_t len;
{

	if (flags & DRIVE_NOSTREAM) {
		if (flags & DRIVE_CAP32) {
			bus_space_read_multi_4(chp->data32iot,
			    chp->data32ioh, 0, buf, len >> 2);
			buf = (char *)buf + (len & ~3);
			len &= 3;
		}
		if (len) {
			bus_space_read_multi_2(chp->cmd_iot,
			    chp->cmd_iohs[wd_data], 0, buf, len >> 1);
		}
	} else {
		if (flags & DRIVE_CAP32) {
			bus_space_read_multi_stream_4(chp->data32iot,
			    chp->data32ioh, 0, buf, len >> 2);
			buf = (char *)buf + (len & ~3);
			len &= 3;
		}
		if (len) {
			bus_space_read_multi_stream_2(chp->cmd_iot,
			    chp->cmd_iohs[wd_data], 0, buf, len >> 1);
		}
	}
}

void
wdc_dataout_pio(chp, flags, buf, len)
	struct wdc_channel *chp;
	int flags;
	void *buf;
	size_t len;
{

	if (flags & DRIVE_NOSTREAM) {
		if (flags & DRIVE_CAP32) {
			bus_space_write_multi_4(chp->data32iot,
			    chp->data32ioh, 0, buf, len >> 2);
			buf = (char *)buf + (len & ~3);
			len &= 3;
		}
		if (len) {
			bus_space_write_multi_2(chp->cmd_iot,
			    chp->cmd_iohs[wd_data], 0, buf, len >> 1);
		}
	} else {
		if (flags & DRIVE_CAP32) {
			bus_space_write_multi_stream_4(chp->data32iot,
			    chp->data32ioh, 0, buf, len >> 2);
			buf = (char *)buf + (len & ~3);
			len &= 3;
		}
		if (len) {
			bus_space_write_multi_stream_2(chp->cmd_iot,
			    chp->cmd_iohs[wd_data], 0, buf, len >> 1);
		}
	}
}