Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/tools/Makefile

69 lines
1.6 KiB
Makefile
Raw Normal View History

Disable makefs in src/tools for the moment; it's very dependent on -current NetBSD headers and sources right now. (Temporary workaround for PR 15175.)
2002-01-09 19:58:35 +03:00
# $NetBSD: Makefile,v 1.27 2002/01/09 16:58:35 tv Exp $
Bootstrap toolchain framework, first pass.
2001-08-14 15:01:55 +04:00
Add lorder to TOOLDIR host tools. Only descend into directories if USE_NEW_TOOLCHAIN is set (allows top level Makefile to use "-m ${.CURDIR}/share/mk" to get the "correct" <bsd.own.mk> when descending into src/tools/Makefile).
2001-09-22 08:15:19 +04:00
.include <bsd.own.mk>
We can't currently build a toolchain for x86-64 here, so don't attempt to do so.
2002-01-01 01:35:41 +03:00
# XXX We can't currently build the toolchain for x86-64.
.if ${MACHINE_ARCH} != "x86_64"
TOOLCHAIN_BITS= toolchain .WAIT dbsym mdsetimage
.endif
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
# Dependencies in SUBDIR below ordered to maximize parallel ability.
* Always use the makewrapper when starting a build phase. * Set stuff mostly in the environment, not on make(1)'s command line. This is needed for MACHINE and MACHINE_ARCH (noted by bjh21), and keeps the mk.conf-overriding-env behavior (suggested by several people). * Use MAKEFLAGS to make the wrapper script more readable. * When prepping objdir in tools for the default TOOLDIR value, just make that objdir; leave the recursive "make obj" for later.
2001-11-02 08:07:22 +03:00
.if !defined(NOSUBDIR)
Add the framework for autoconf-based src/tools/compat structure. This will (after it is more fleshed out) allow the host tools to work more cleanly on non-NetBSD hosts.
2001-12-12 00:17:56 +03:00
SUBDIR= mkdep .WAIT compat .WAIT \
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
binstall .WAIT \
crunchgen gencat lint lint2 lorder mtree rpcgen \
Build makewhatis as a host tool, since it is used at the end of the build. XXX Needs a -lz hostlib.
2001-11-30 02:51:38 +03:00
texinfo tsort makewhatis \
We can't currently build a toolchain for x86-64 here, so don't attempt to do so.
2002-01-01 01:35:41 +03:00
${TOOLCHAIN_BITS} \
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
yacc .WAIT \
groff \
lex .WAIT \
Disable makefs in src/tools for the moment; it's very dependent on -current NetBSD headers and sources right now. (Temporary workaround for PR 15175.)
2002-01-09 19:58:35 +03:00
asn1_compile compile_et config lint1 msgc menuc \
build zic as a host tool.
2002-01-05 10:36:33 +03:00
mklocale pwd_mkdb zic
Add the framework for autoconf-based src/tools/compat structure. This will (after it is more fleshed out) allow the host tools to work more cleanly on non-NetBSD hosts.
2001-12-12 00:17:56 +03:00
.if ${MKMAINTAINERTOOLS:Uno} != "no"
SUBDIR+= m4 .WAIT autoconf
.endif
build makefs, and, sparc-installboot if sparc||sparc64
2002-01-05 10:03:30 +03:00
.if ${MACHINE} == sparc || ${MACHINE} == sparc64
SUBDIR+= sparc-installboot
.endif
* Always use the makewrapper when starting a build phase. * Set stuff mostly in the environment, not on make(1)'s command line. This is needed for MACHINE and MACHINE_ARCH (noted by bjh21), and keeps the mk.conf-overriding-env behavior (suggested by several people). * Use MAKEFLAGS to make the wrapper script more readable. * When prepping objdir in tools for the default TOOLDIR value, just make that objdir; leave the recursive "make obj" for later.
2001-11-02 08:07:22 +03:00
.endif
Bootstrap toolchain framework, first pass.
2001-08-14 15:01:55 +04:00
Check for USETOOLS!=yes in addition to MKTOOLS==no to generate the empty rule sets. Otherwise platforms not running the new toolchain will end up with lossage as tools attempt to get built and installed into /bin (due to bsd.own.mk properly checking USETOOLS before setting up a default TOOLDIR). Don't print the warning unless MKTOOLS=no
2001-11-22 03:13:10 +03:00
.if ${MKTOOLS:Uyes} == "no" || ${USETOOLS} != "yes"
Re-add MKTOOLS as a "yes"/"no" only variable, which prevents recursion on "no" into the src/tools subdirs on all/depend/dependall/install. Other recursive targets are not affected.
2001-11-13 19:17:24 +03:00
realall install: _warn
Oops. typo which can break things for non-new toolchain builds if MKTOOLS isn't set
2001-11-22 22:09:42 +03:00
.if ${MKTOOLS:Uyes} == "no"
Re-add MKTOOLS as a "yes"/"no" only variable, which prevents recursion on "no" into the src/tools subdirs on all/depend/dependall/install. Other recursive targets are not affected.
2001-11-13 19:17:24 +03:00
_warn:
@echo '*** WARNING: "MKTOOLS" is set to "no"; this will prevent building and'
@echo '*** updating your host toolchain. This should be used only as a'
@echo '*** temporary workaround for toolchain problems, as it will result'
Typo fix in error message.
2001-12-29 18:45:52 +03:00
@echo '*** in version skew and build errors over time!'
Check for USETOOLS!=yes in addition to MKTOOLS==no to generate the empty rule sets. Otherwise platforms not running the new toolchain will end up with lossage as tools attempt to get built and installed into /bin (due to bsd.own.mk properly checking USETOOLS before setting up a default TOOLDIR). Don't print the warning unless MKTOOLS=no
2001-11-22 03:13:10 +03:00
.else
_warn:
.endif
Re-add MKTOOLS as a "yes"/"no" only variable, which prevents recursion on "no" into the src/tools subdirs on all/depend/dependall/install. Other recursive targets are not affected.
2001-11-13 19:17:24 +03:00
.for dir in ${SUBDIR:N.WAIT}
all-${dir} depend-${dir} dependall-${dir} install-${dir}:
@true
.endfor
.endif
Bootstrap toolchain framework, first pass.
2001-08-14 15:01:55 +04:00
.include <bsd.subdir.mk>
* Always descend into "tools" regardless of USETOOLS setting. Instead, just don't build the tools if USETOOLS!=yes. This permits objdirs to be created even when USETOOLS=no. * Clean up use of "-m" by specifying it to .MAKEFLAGS: if needed.
2001-10-31 04:20:09 +03:00
.include <bsd.obj.mk>
* Create a variable HOST_OSTYPE that represents the host build environment, using `uname -s`-`uname -r`-`uname -p || uname -m`. This can be overridden in mk.conf or the environment, and is used by host tools to ensure that build hosts do not clobber each other. * Now that there's an objdir in src/tools, make a default TOOLDIR by creating "tools.${HOST_OSTYPE}" in the objdir (if it exists) of src/tools. This means that TOOLDIR is no longer required to be set in a build, though it still may be set manually if desired. * Set MKTOOLS to "yes" by default, since the default TOOLDIR is now located in a known mutable location. This may still be set manually if desired.
2001-10-31 20:46:08 +03:00
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
# For each .WAIT point, make sure the previous target is installed before
# building a dependent target.
_dep:=
_last:=
.for d in ${SUBDIR}
_this:= ${d}
.if ${_this} == ".WAIT"
_dep:= ${_dep} install-${_last}
.else
_last:= ${d}
depend-${d} all-${d} dependall-${d}: ${_dep}
.endif
.endfor
* Create a variable HOST_OSTYPE that represents the host build environment, using `uname -s`-`uname -r`-`uname -p || uname -m`. This can be overridden in mk.conf or the environment, and is used by host tools to ensure that build hosts do not clobber each other. * Now that there's an objdir in src/tools, make a default TOOLDIR by creating "tools.${HOST_OSTYPE}" in the objdir (if it exists) of src/tools. This means that TOOLDIR is no longer required to be set in a build, though it still may be set manually if desired. * Set MKTOOLS to "yes" by default, since the default TOOLDIR is now located in a known mutable location. This may still be set manually if desired.
2001-10-31 20:46:08 +03:00
cleantools:
rm -r -f tools.${HOST_OSTYPE}