NetBSD/etc/rc

397 lines
10 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
2010-06-04 22:42:54 +04:00
# $NetBSD: rc,v 1.165 2010/06/04 18:42:54 christos Exp $
#
# rc --
# Run the scripts in /etc/rc.d with rcorder, and log output
# to /var/run/rc.log.
1993-03-21 12:45:37 +03:00
# System startup script run by init(8) on autoboot or after single-user.
# Output and error are redirected to console by init, and the console
# is the controlling terminal.
1993-03-21 12:45:37 +03:00
1997-03-10 12:34:59 +03:00
export HOME=/
export PATH=/sbin:/bin:/usr/sbin:/usr/bin
umask 022
if [ -e ./rc.subr ] ; then
. ./rc.subr # for testing
else
. /etc/rc.subr
fi
. /etc/rc.conf
_rc_conf_loaded=true
: ${RC_LOG_FILE:="/var/run/rc.log"}
if ! checkyesno rc_configured; then
echo "/etc/rc.conf is not configured. Multiuser boot aborted."
exit 1
fi
if [ "$1" = autoboot ]; then
autoboot=yes
2002-04-18 11:18:05 +04:00
rc_fast=yes # run_rc_command(): do fast booting
fi
#
# Completely ignore INT and QUIT at the outer level. The rc_real_work()
# function should do something different.
#
trap '' INT QUIT
#
# This string will be used to mark lines of meta-data sent over the pipe
# from the rc_real_work() function to the rc_postprocess() function. Lines
# not so marked are assumed to be output from rc.d scripts.
#
# This string is long and unique to ensure that it does not accidentally
# appear in output from any rc.d script. It must not contain any
# characters that are special to glob expansion ('*', '?', '[', or ']').
#
rc_metadata_prefix="$0:$$:metadata:";
# Child scripts may sometimes want to print directly to the original
# stdout and stderr, bypassing the pipe to the postprocessor. These
# _rc_*_fd variables are private, shared with /etc/rc.subr, but not
# intended to be used directly by child scripts. (Child scripts
# may use rc.subr's no_rc_postprocess function.)
#
_rc_original_stdout_fd=7; export _rc_original_stdout_fd
_rc_original_stderr_fd=8; export _rc_original_stderr_fd
eval "exec ${_rc_original_stdout_fd}>&1"
eval "exec ${_rc_original_stderr_fd}>&2"
1993-03-21 12:45:37 +03:00
#
# rc_real_work
# Do the real work. Output from this function will be piped into
# rc_postprocess(), and some of the output will be marked as
# metadata.
#
# The body of this function is defined using (...), not {...}, to force
# it to run in a subshell.
#
rc_real_work()
(
stty status '^T'
# print_rc_metadata() wants to be able to print to the pipe
# that goes to our postprocessor, even if its in a context
# with redirected output.
#
_rc_postprocessor_fd=9 ; export _rc_postprocessor_fd
eval "exec ${_rc_postprocessor_fd}>&1"
# Print a metadata line when we exit
#
trap 'es=$?; print_rc_metadata "exit:$es"; trap "" 0; exit $es' 0
# Set shell to ignore SIGINT, but children will not ignore it.
# Shell catches SIGQUIT and returns to single user.
#
trap : INT
trap '_msg="Boot interrupted at $(date)";
print_rc_metadata "interrupted:${_msg}";
exit 1' QUIT
print_rc_metadata "start:$(date)"
2001-03-12 18:56:39 +03:00
#
# The stop_boot() function in rc.subr may kill $RC_PID. We want
# it to kill the subshell running this rc_real_work() function,
# rather than killing the parent shell, because we want the
# rc_postprocess() function to be able to log the error
# without being killed itself.
#
# "$$" is the pid of the top-level shell, not the pid of the
# subshell that's executing this function. The command below
# tentatively assumes that the parent of the "/bin/sh -c ..."
# process will be the current subshell, and then uses "kill -0
# ..." to check the result. If the "/bin/sh -c ..." process
# fails, or returns the pid of an ephemeral process that exits
# before the "kill" command, then we fall back to using "$$".
#
RC_PID=$(/bin/sh -c 'ps -p $$ -o ppid=') || RC_PID=$$
kill -0 $RC_PID >/dev/null 2>&1 || RC_PID=$$
1993-03-21 12:45:37 +03:00
#
# Get a list of all rc.d scripts, and use rcorder to choose
# what order to execute them.
#
# For testing, allow RC_FILES_OVERRIDE from the environment to
# override this.
#
print_rc_metadata "cmd-name:rcorder"
scripts=$(for rcd in ${rc_directories:-/etc/rc.d}; do
test -d ${rcd} && echo ${rcd}/*;
done)
files=$(rcorder -s nostart ${rc_rcorder_flags} ${scripts})
print_rc_metadata "cmd-status:rcorder:$?"
if [ -n "${RC_FILES_OVERRIDE}" ]; then
files="${RC_FILES_OVERRIDE}"
fi
#
# Run the scripts in order.
#
for _rc_elem in $files; do
print_rc_metadata "cmd-name:$_rc_elem"
run_rc_script $_rc_elem start
print_rc_metadata "cmd-status:$_rc_elem:$?"
done
print_rc_metadata "end:$(date)"
exit 0
)
#
# rc_postprocess
# Post-process the output from the rc_real_work() function. For
# each line of input, we have to decide whether to print the line
# to the console, print a twiddle on the console, print a line to
# the log, or some combination of these.
#
# If rc_silent is true, then suppress most output, instead running
# rc_silent_cmd (typically "twiddle") for each line.
#
# The body of this function is defined using (...), not {...}, to force
# it to run in a subshell.
#
# We have to deal with the following constraints:
#
# * There may be no writable file systems early in the boot, so
# any use of temporary files would be problematic.
#
# * Scripts run during the boot may clear /tmp and/var/run, so even
# if they are writable, using those directories too early may be
# problematic. We assume that it's safe to write to our log file
# after the mountcritlocal script has run.
#
# * /usr/bin/tee cannot be used because the /usr file system may not
# be mounted early in the boot.
#
# * All calls to the rc_log_message and rc_log_flush functions must be
# from the same subshell, otherwise the use of a shell variable to
# buffer log messages will fail.
#
rc_postprocess()
(
local line
local before after
local IFS=''
# Try quite hard to flush the log to disk when we exit.
trap 'es=$?; rc_log_flush FORCE; trap "" 0; exit $es' 0
yesno_to_truefalse rc_silent 2>/dev/null
while read -r line ; do
case "$line" in
"${rc_metadata_prefix}"*)
after="${line#*"${rc_metadata_prefix}"}"
rc_postprocess_metadata "${after}"
;;
*"${rc_metadata_prefix}"*)
# magic string is present, but not at the start of
# the line. Treat it like two separate lines.
before="${line%"${rc_metadata_prefix}"*}"
rc_postprocess_plain_line "${before}"
after="${line#*"${rc_metadata_prefix}"}"
rc_postprocess_metadata "${after}"
;;
*)
rc_postprocess_plain_line "${line}"
;;
esac
done
# If we get here, then the rc_real_work() function must have
# exited uncleanly. A clean exit would have been accompanied by
# a line of metadata that would have prevented us from getting
# here.
#
exit 1
)
#
# rc_postprocess_plain_line string
# $1 is a string representing a line of output from one of the
# rc.d scripts. Append the line to the log, and also either
# display the line on the console, or run $rc_silent_cmd,
# depending on the value of $rc_silent.
#
rc_postprocess_plain_line()
{
local line="$1"
rc_log_message "${line}"
if $rc_silent; then
eval "$rc_silent_cmd"
else
printf "%s\n" "${line}"
fi
}
#
# rc_postprocess_metadata string
# $1 is a string containing metadata from the rc_real_work()
# function. The rc_metadata_prefix marker should already
# have been removed before the string is passed to this function.
# Take appropriate action depending on the content of the string.
#
rc_postprocess_metadata()
{
local metadata="$1"
local keyword args
local msg
local IFS=':'
# given metadata="bleep:foo bar:baz",
# set keyword="bleep", args="foo bar:baz",
# $1="foo bar", $2="baz"
#
keyword="${metadata%%:*}"
args="${metadata#*:}"
set -- $args
case "$keyword" in
start)
# $args contains a date/time
rc_log_message "[$0 starting at $args]"
if ! $rc_silent; then
printf "%s\n" "$args"
fi
;;
cmd-name)
rc_log_message "[running $1]"
;;
cmd-status)
# $1 is a command name, $2 is the command's exit status.
# If the command failed, report it, and add it to a list.
if [ "$2" != 0 ]; then
rc_failures="${rc_failures}${rc_failures:+ }$1"
2010-06-04 22:42:54 +04:00
msg="$1 $(human_exit_code $2)"
rc_log_message "$msg"
if ! $rc_silent; then
printf "%s\n" "$msg"
fi
fi
# After the mountcritlocal script has finished, it's
# OK to flush the log to disk
case "$1" in
*/mountcritlocal)
rc_log_flush OK
;;
esac
;;
note)
rc_log_message "[NOTE: $args]"
;;
end)
#
# If any scripts (or other commands) failed, report them.
#
if [ -n "$rc_failures" ]; then
rc_log_message "[failures]"
msg="The following components reported failures:"
msg="${msg}${nl}$( echo " ${rc_failures}" | fmt )"
msg="${msg}${nl}See ${RC_LOG_FILE} for more information."
rc_log_message "${msg}"
printf "%s\n" "${msg}"
fi
#
# Report the end date/time, even in silent mode
#
rc_log_message "[$0 finished at $args]"
printf "%s\n" "$args"
;;
exit)
rc_log_message "[$0 exiting with status $1]"
exit $1
;;
interrupted)
# $args is a human-readable message
rc_log_message "$args"
printf "%s\n" "$args"
;;
*)
# an unrecognised line of metadata
rc_log_message "[metadata:${metadata}]"
;;
esac
}
#
# rc_log_message string [...]
# write a message to the log file, or buffer it for later.
#
rc_log_message()
{
_rc_log_buffer="${_rc_log_buffer}${*}${nl}"
rc_log_flush
}
#
# rc_log_flush [OK|FORCE]
# save outstanding messages from $_rc_log_buffer to $RC_LOG_FILE.
#
# The log file is expected to reside in the /var/run directory, which
# may not be writable very early in the boot sequence, and which is
# erased a little later in the boot sequence. We therefore avoid
# writing to the file until we believe it's safe to do so. We also
# assume that it's reasonable to always append to the file, never
# truncating it.
#
# Optional argument $1 may be "OK" to report that writing to the log
# file is expected to be safe from now on, or "FORCE" to force writing
# to the log file even if it may be unsafe.
#
# Returns a non-zero status if messages could not be written to the
# file.
#
rc_log_flush()
{
#
# If $_rc_log_flush_ok is false, then it's probably too early to
# write to the log file, so don't do it, unless $1 is "FORCE".
#
: ${_rc_log_flush_ok=false}
case "$1:$_rc_log_flush_ok" in
OK:*)
_rc_log_flush_ok=true
;;
FORCE:*)
: OK just this once
;;
*:true)
: OK
;;
*)
# it's too early in the boot sequence, so don't flush
return 1
;;
esac
#
# Now append the buffer to the file. The buffer should already
# contain a trailing newline, so don't add an extra newline.
#
if [ -n "$_rc_log_buffer" ]; then
if { printf "%s" "${_rc_log_buffer}" >>"${RC_LOG_FILE}" ; } \
2>/dev/null
then
_rc_log_buffer=""
else
return 1
fi
fi
return 0
}
#
# Most of the action is in the rc_real_work() and rc_postprocess()
# functions.
#
rc_real_work "$@" 2>&1 | rc_postprocess
exit $?