NetBSD/sbin/raidctl/rf_configure.c

/*
 * Copyright (c) 1995 Carnegie-Mellon University.
 * All rights reserved.
 *
 * Author: Mark Holland
 *
 * Permission to use, copy, modify and distribute this software and
 * its documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 *
 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
 * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 *
 * Carnegie Mellon requests users of this software to return to
 *
 *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 *
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */

/***************************************************************
 *
 * rf_configure.c -- code related to configuring the raidframe system
 *
 * configuration is complicated by the fact that we want the same
 * driver to work both in the kernel and at user level.  In the
 * kernel, we can't read the configuration file, so we configure
 * by running a user-level program that reads the config file,
 * creates a data structure describing the configuration and
 * passes it into the kernel via an ioctl.  Since we want the config
 * code to be common between the two versions of the driver, we
 * configure using the same two-step process when running at
 * user level.  Of course, at user level, the config structure is
 * passed directly to the config routine, rather than via ioctl.
 *
 * This file is not compiled into the kernel, so we have no
 * need for KERNEL ifdefs.
 *
 **************************************************************/

/* $Locker:  $
 * $Log: rf_configure.c,v $
 * Revision 1.3  1999/01/12 22:58:10  mjacob
 * recover from errno.h changes
 *
 * Revision 1.2  1998/11/23 00:18:40  mrg
 * fix compile errors on the alpha.
 *
 * Revision 1.1  1998/11/13 04:34:02  oster
 *
 * RAIDframe, version 1.1, from the Parallel Data Laboratory at
 * Carnegie Mellon University.  Full RAID implementation, including
 * levels 0, 1, 4, 5, 6, parity logging, and a few other goodies.
 * Ported to NetBSD by Greg Oster.
 *
 * raidctl is our userland configuration tool for RAIDframe.
 *
 * Revision 1.42  1996/08/09 18:47:47  jimz
 * major -> dev_major
 *
 * Revision 1.41  1996/07/29  14:05:12  jimz
 * fix numPUs/numRUs confusion (everything is now numRUs)
 * clean up some commenting, return values
 *
 * Revision 1.40  1996/07/27  23:36:08  jimz
 * Solaris port of simulator
 *
 * Revision 1.39  1996/07/27  18:39:45  jimz
 * cleanup sweep
 *
 * Revision 1.38  1996/07/18  22:57:14  jimz
 * port simulator to AIX
 *
 * Revision 1.37  1996/06/19  14:58:02  jimz
 * move layout-specific config parsing hooks into RF_LayoutSW_t
 * table in rf_layout.c
 *
 * Revision 1.36  1996/06/17  14:38:33  jimz
 * properly #if out RF_DEMO code
 * fix bug in MakeConfig that was causing weird behavior
 * in configuration routines (config was not zeroed at start)
 * clean up genplot handling of stacks
 *
 * Revision 1.35  1996/06/05  19:38:32  jimz
 * fixed up disk queueing types config
 * added sstf disk queueing
 * fixed exit bug on diskthreads (ref-ing bad mem)
 *
 * Revision 1.34  1996/06/03  23:28:26  jimz
 * more bugfixes
 * check in tree to sync for IPDS runs with current bugfixes
 * there still may be a problem with threads in the script test
 * getting I/Os stuck- not trivially reproducible (runs ~50 times
 * in a row without getting stuck)
 *
 * Revision 1.33  1996/06/02  17:31:48  jimz
 * Moved a lot of global stuff into array structure, where it belongs.
 * Fixed up paritylogging, pss modules in this manner. Some general
 * code cleanup. Removed lots of dead code, some dead files.
 *
 * Revision 1.32  1996/05/30  23:22:16  jimz
 * bugfixes of serialization, timing problems
 * more cleanup
 *
 * Revision 1.31  1996/05/30  11:29:41  jimz
 * Numerous bug fixes. Stripe lock release code disagreed with the taking code
 * about when stripes should be locked (I made it consistent: no parity, no lock)
 * There was a lot of extra serialization of I/Os which I've removed- a lot of
 * it was to calculate values for the cache code, which is no longer with us.
 * More types, function, macro cleanup. Added code to properly quiesce the array
 * on shutdown. Made a lot of stuff array-specific which was (bogusly) general
 * before. Fixed memory allocation, freeing bugs.
 *
 * Revision 1.30  1996/05/27  18:56:37  jimz
 * more code cleanup
 * better typing
 * compiles in all 3 environments
 *
 * Revision 1.29  1996/05/24  01:59:45  jimz
 * another checkpoint in code cleanup for release
 * time to sync kernel tree
 *
 * Revision 1.28  1996/05/18  19:51:34  jimz
 * major code cleanup- fix syntax, make some types consistent,
 * add prototypes, clean out dead code, et cetera
 *
 * Revision 1.27  1995/12/12  18:10:06  jimz
 * MIN -> RF_MIN, MAX -> RF_MAX, ASSERT -> RF_ASSERT
 * fix 80-column brain damage in comments
 *
 * Revision 1.26  1995/12/01  15:16:36  root
 * added copyright info
 *
 */


#include <stdio.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include "rf_raid.h"
#include "rf_raidframe.h"
#include "rf_utils.h"
#include "rf_general.h"
#include "rf_decluster.h"
#include "rf_configure.h"
#include "rf_sys.h"

/* 

   XXX we include this here so we don't need to drag rf_debugMem.c into 
   the picture...  This is userland, afterall... 

 */

/* XXX sucky hack to override the defn. of RF_Malloc as given in 
rf_debugMem.c...  but I *really* don't want (nor need) to link with 
that file here in userland..  GO
*/

#undef RF_Malloc
#define RF_Malloc(_p_, _size_, _cast_) \
  { \
     _p_ = _cast_ malloc((u_long)_size_); \
     bzero((char *)_p_, _size_); \
  }



#ifndef SIMULATE
static unsigned int dev_name2num(char *s);
static unsigned int osf_dev_name2num(char *s);
#endif
static int rf_search_file_for_start_of(char *string, char *buf, int len,
	FILE *fp);
static int rf_get_next_nonblank_line(char *buf, int len, FILE *fp,
	char *errmsg);

/* called from user level to read the configuration file and create
 * a configuration control structure.  This is used in the user-level
 * version of the driver, and in the user-level program that configures
 * the system via ioctl.
 */
int rf_MakeConfig(configname, cfgPtr)
  char         *configname;
  RF_Config_t  *cfgPtr;
{
  int numscanned, val, r, c, retcode, aa, bb, cc;
  char buf[256], buf1[256], *cp;
  RF_LayoutSW_t *lp;
  FILE *fp;

  bzero((char *)cfgPtr, sizeof(RF_Config_t));

  fp = fopen(configname, "r");
  if (!fp) {
    RF_ERRORMSG1("Can't open config file %s\n",configname);
    return(-1);
  }
  
  rewind(fp);
  if (rf_search_file_for_start_of("array", buf, 256, fp)) {
    RF_ERRORMSG1("Unable to find start of \"array\" params in config file %s\n",configname);
    retcode = -1; goto out;
  }
  rf_get_next_nonblank_line(buf, 256, fp, "Config file error (\"array\" section):  unable to get numRow and numCol\n");
  /*
   * wackiness with aa, bb, cc to get around size problems on different platforms
   */
  numscanned = sscanf(buf,"%d %d %d", &aa, &bb, &cc);
  if (numscanned != 3) {
    RF_ERRORMSG("Config file error (\"array\" section):  unable to get numRow, numCol, numSpare\n");
    retcode = -1; goto out;
  }
  cfgPtr->numRow = (RF_RowCol_t)aa;
  cfgPtr->numCol = (RF_RowCol_t)bb;
  cfgPtr->numSpare = (RF_RowCol_t)cc;

  /* debug section is optional */
  for (c=0; c<RF_MAXDBGV; c++)
    cfgPtr->debugVars[c][0] = '\0';
  rewind(fp);
  if (!rf_search_file_for_start_of("debug", buf, 256, fp)) {
    for (c=0; c < RF_MAXDBGV; c++) {
      if (rf_get_next_nonblank_line(buf, 256, fp, NULL)) break;
      cp = rf_find_non_white(buf);
      if (!strncmp(cp, "START", strlen("START"))) break;
      (void) strcpy(&cfgPtr->debugVars[c][0], cp);
    }
  }
  
  rewind(fp);
  strcpy(cfgPtr->diskQueueType,"fifo");
  cfgPtr->maxOutstandingDiskReqs = 1;
  /* scan the file for the block related to disk queues */
  if (rf_search_file_for_start_of("queue",buf,256,fp)) {
    RF_ERRORMSG2("[No disk queue discipline specified in config file %s.  Using %s.]\n",configname, cfgPtr->diskQueueType);
  } else {
    if (rf_get_next_nonblank_line(buf, 256, fp, NULL)) {
      RF_ERRORMSG2("[No disk queue discipline specified in config file %s.  Using %s.]\n",configname, cfgPtr->diskQueueType);
    }
  }

  /* the queue specifier line contains two entries:
   * 1st char of first word specifies queue to be used
   * 2nd word specifies max num reqs that can be outstanding on the disk itself (typically 1)
   */
  if (sscanf(buf,"%s %d",buf1,&val)!=2) {
    RF_ERRORMSG1("Can't determine queue type and/or max outstanding reqs from line: %s",buf);
    RF_ERRORMSG2("Using %s-%d\n", cfgPtr->diskQueueType, cfgPtr->maxOutstandingDiskReqs);
  } else {
    char *c;
    bcopy(buf1, cfgPtr->diskQueueType, RF_MIN(sizeof(cfgPtr->diskQueueType), strlen(buf1)+1));
    for(c=buf1;*c;c++) {
      if (*c == ' ') {
        *c = '\0';
        break;
      }
    }
    cfgPtr->maxOutstandingDiskReqs = val;
  }

  rewind(fp);


  if (rf_search_file_for_start_of("disks",buf,256,fp)) {
    RF_ERRORMSG1("Can't find \"disks\" section in config file %s\n",configname);
    retcode = -1; goto out;
  }

  for (r=0; r<cfgPtr->numRow; r++) {
    for (c=0; c<cfgPtr->numCol; c++) {
      if (rf_get_next_nonblank_line(&cfgPtr->devnames[r][c][0], 50, fp, NULL)) {
	RF_ERRORMSG2("Config file error: unable to get device file for disk at row %d col %d\n",r,c);
	retcode = -1; goto out;
      }
#ifndef SIMULATE
      val = dev_name2num(&cfgPtr->devnames[r][c][0]);

      if (val < 0) {
	RF_ERRORMSG3("Config file error: can't get dev num (dev file '%s') for disk at row %d c %d\n",
		  &cfgPtr->devnames[r][c][0],r,c);
	retcode = -1; goto out;
      } else cfgPtr->devs[r][c] = val;
#endif /* !SIMULATE */
    }
  }

  /* "spare" section is optional */
  rewind(fp);
  if (rf_search_file_for_start_of("spare",buf,256,fp)) cfgPtr->numSpare =0;
  for (c = 0; c < cfgPtr->numSpare; c++) {
    if (rf_get_next_nonblank_line(&cfgPtr->spare_names[c][0], 256, fp, NULL)) {
      RF_ERRORMSG1("Config file error: unable to get device file for spare disk %d\n",c);
      retcode = -1; goto out;
    }
#ifndef SIMULATE
    val = dev_name2num(&cfgPtr->spare_names[c][0]);
    if (val < 0) {
      RF_ERRORMSG2("Config file error: can't get dev num (dev file '%s') for spare disk %d\n",
		&cfgPtr->spare_names[c][0],c);
      retcode = -1; goto out;
    } else cfgPtr->spare_devs[c] = val;
#endif /* !SIMULATE */
  }

  /* scan the file for the block related to layout */
  rewind(fp);
  if (rf_search_file_for_start_of("layout",buf,256,fp)) {
    RF_ERRORMSG1("Can't find \"layout\" section in configuration file %s\n",configname);
    retcode = -1; goto out;
  }
  if (rf_get_next_nonblank_line(buf, 256, fp, NULL)) {
    RF_ERRORMSG("Config file error (\"layout\" section): unable to find common layout param line\n");
    retcode = -1; goto out;
  }
  c = sscanf(buf,"%d %d %d %c", &aa, &bb, &cc, &cfgPtr->parityConfig);
  cfgPtr->sectPerSU = (RF_SectorNum_t)aa;
  cfgPtr->SUsPerPU = (RF_StripeNum_t)bb;
  cfgPtr->SUsPerRU = (RF_StripeNum_t)cc;
  if (c != 4) {
    RF_ERRORMSG("Unable to scan common layout line\n");
    retcode = -1; goto out;
  }
  lp = rf_GetLayout(cfgPtr->parityConfig);
  if (lp == NULL) {
    RF_ERRORMSG1("Unknown parity config '%c'\n", cfgPtr->parityConfig);
    retcode = -1;
    goto out;
  }

  /* XXX who cares.. it's not going into the kernel, so we should ignore this... */
#ifndef KERNEL
  retcode = lp->MakeLayoutSpecific(fp, cfgPtr, lp->makeLayoutSpecificArg);
#endif
out:
  fclose(fp);
  if (retcode < 0)
    retcode = errno = EINVAL;
  else
    errno = retcode;
  return(retcode);
}


/* used in architectures such as RAID0 where there is no layout-specific
 * information to be passed into the configuration code.
 */
int rf_MakeLayoutSpecificNULL(fp, cfgPtr, ignored)
  FILE         *fp;
  RF_Config_t  *cfgPtr;
  void         *ignored;
{
  cfgPtr->layoutSpecificSize = 0;
  cfgPtr->layoutSpecific     = NULL;
  return(0);
}

int rf_MakeLayoutSpecificDeclustered(configfp, cfgPtr, arg)
  FILE         *configfp;
  RF_Config_t  *cfgPtr;
  void         *arg;
{
  int b, v, k, r, lambda, norotate, i, val, distSpare;
  char *cfgBuf, *bdfile, *p, *smname;
  char buf[256], smbuf[256];
  FILE *fp;

  distSpare = *((int *)arg);

  /* get the block design file name */
  if (rf_get_next_nonblank_line(buf,256,configfp,"Can't find block design file name in config file\n"))
    return(EINVAL);
  bdfile = rf_find_non_white(buf);
  if (bdfile[strlen(bdfile)-1] == '\n') {
    /* strip newline char */
    bdfile[strlen(bdfile)-1] = '\0';
  }

  /* open bd file, check validity of configuration */
  if ((fp = fopen(bdfile,"r"))==NULL) {
    RF_ERRORMSG1("RAID: config error: Can't open layout table file %s\n",bdfile);
    return(EINVAL);
  }

  fgets(buf,256,fp);
  i = sscanf(buf,"%u %u %u %u %u %u",&b,&v,&k,&r,&lambda,&norotate);
  if (i == 5)
    norotate = 0; /* no-rotate flag is optional */
  else if (i != 6) {
    RF_ERRORMSG("Unable to parse header line in block design file\n");
    return(EINVAL);
  }
  
  /* set the sparemap directory.  In the in-kernel version, there's a daemon
   * that's responsible for finding the sparemaps
   */
  if (distSpare) {
    if (rf_get_next_nonblank_line(smbuf,256,configfp,"Can't find sparemap file name in config file\n"))
      return(EINVAL);
    smname = rf_find_non_white(smbuf);
    if (smname[strlen(smname)-1] == '\n') {
      /* strip newline char */
      smname[strlen(smname)-1] = '\0';
    }
  }
  else {
    smbuf[0] = '\0';
    smname = smbuf;
  }

  /* allocate a buffer to hold the configuration info */
  cfgPtr->layoutSpecificSize = RF_SPAREMAP_NAME_LEN + 6 * sizeof(int) + b * k;
  /* can't use RF_Malloc here b/c debugMem module not yet init'd */
  cfgBuf = (char *) malloc(cfgPtr->layoutSpecificSize);          
  cfgPtr->layoutSpecific = (void *) cfgBuf;
  p = cfgBuf;

  /* install name of sparemap file */
  for (i=0; smname[i]; i++)
    *p++ = smname[i];
  /* pad with zeros */
  while (i<RF_SPAREMAP_NAME_LEN) {
    *p++ = '\0';
    i++;
  }

  /*
   * fill in the buffer with the block design parameters
   * and then the block design itself
   */
  *( (int *) p) = b;        p += sizeof(int);
  *( (int *) p) = v;        p += sizeof(int);
  *( (int *) p) = k;        p += sizeof(int);
  *( (int *) p) = r;        p += sizeof(int);
  *( (int *) p) = lambda;   p += sizeof(int);
  *( (int *) p) = norotate; p += sizeof(int);

  while (fscanf(fp,"%d",&val) == 1)
    *p++ = (char) val;
  fclose(fp);
  if (p - cfgBuf != cfgPtr->layoutSpecificSize) {
      RF_ERRORMSG2("Size mismatch creating layout specific data: is %d sb %d bytes\n",(int)(p-cfgBuf),(int)(6*sizeof(int)+b*k));
      return(EINVAL);
  }
  return(0);
}


/****************************************************************************
 *
 * utilities
 *
 ***************************************************************************/
#ifndef SIMULATE
/* convert a device file name to a device number */
static unsigned int dev_name2num(s)
  char  *s;
{
  struct stat buf;

  if (stat(s, &buf) < 0) return(osf_dev_name2num(s));
  else return(buf.st_rdev);
}

/* converts an osf/1 style device name to a device number.  We use this
 * only if the stat of the device file fails.
 */
static unsigned int osf_dev_name2num(s)
  char  *s;
{
  int num;
  char part_ch, lun_ch;
  unsigned int bus, target, lun, part, dev_major;

  dev_major = RF_SCSI_DISK_MAJOR;
  if (sscanf(s,"/dev/rrz%d%c", &num, &part_ch) == 2) {
    bus = num>>3;
    target = num & 0x7;
    part = part_ch - 'a';
    lun = 0;
  } else if (sscanf(s,"/dev/rrz%c%d%c", &lun_ch, &num, &part_ch) == 3) {
    bus = num>>3;
    target = num & 0x7;
    part = part_ch - 'a';
    lun = lun_ch - 'a' + 1;
  } else {
    RF_ERRORMSG1("Unable to parse disk dev file name %s\n",s);
    return(-1);
  }

  return( (dev_major<<20) | (bus<<14) | (target<<10) | (lun<<6) | part );
}
#endif

/* searches a file for a line that says "START string", where string is
 * specified as a parameter
 */
static int rf_search_file_for_start_of(string, buf, len, fp)
  char  *string;
  char  *buf;
  int    len;
  FILE  *fp;
{
  char *p;

  while (1) {
    if (fgets(buf, len, fp) == NULL) return(-1);
    p = rf_find_non_white(buf);
    if (!strncmp(p, "START", strlen("START"))) {
      p = rf_find_white(p);
      p = rf_find_non_white(p);
      if (!strncmp(p, string, strlen(string))) return(0);
    }
  }
}

/* reads from file fp into buf until it finds an interesting line */
int rf_get_next_nonblank_line(buf, len, fp, errmsg)
  char  *buf;
  int    len;
  FILE  *fp;
  char  *errmsg;
{
  char *p;

  while (fgets(buf,256,fp) != NULL) {
    p = rf_find_non_white(buf);
    if (*p == '\n' || *p == '\0' || *p == '#') continue;
    return(0);
  }
  if (errmsg) RF_ERRORMSG(errmsg);
  return(1);
}

/* Allocates an array for the spare table, and initializes it from a file.
 * In the user-level version, this is called when recon is initiated.
 * When/if I move recon into the kernel, there'll be a daemon that does
 * an ioctl into raidframe which will block until a spare table is needed.
 * When it returns, it will read a spare table from the file system,
 * pass it into the kernel via a different ioctl, and then block again
 * on the original ioctl.
 *
 * This is specific to the declustered layout, but doesn't belong in
 * rf_decluster.c because it uses stuff that can't be compiled into
 * the kernel, and it needs to be compiled into the user-level sparemap daemon.
 *
 */
void *rf_ReadSpareTable(req, fname)
  RF_SparetWait_t  *req;
  char             *fname;
{
  int i, j, numFound, linecount, tableNum, tupleNum, spareDisk, spareBlkOffset;
  char buf[1024], targString[100], errString[100];
  RF_SpareTableEntry_t **table;
  FILE *fp;

  /* allocate and initialize the table */
  RF_Malloc(table, req->TablesPerSpareRegion * sizeof(RF_SpareTableEntry_t *), (RF_SpareTableEntry_t **));
  for (i=0; i<req->TablesPerSpareRegion; i++) {
    RF_Malloc(table[i], req->BlocksPerTable * sizeof(RF_SpareTableEntry_t), (RF_SpareTableEntry_t *));
    for (j=0; j<req->BlocksPerTable; j++) table[i][j].spareDisk = table[i][j].spareBlockOffsetInSUs = -1;
  }

  /* 2.  open sparemap file, sanity check */
  if ((fp = fopen(fname,"r"))==NULL) {
    fprintf(stderr,"rf_ReadSpareTable:  Can't open sparemap file %s\n",fname);  return(NULL);
  }
  if (rf_get_next_nonblank_line(buf,1024,fp,"Invalid sparemap file:  can't find header line\n"))
    return(NULL);
  if (buf[strlen(buf)-1] == '\n')
    buf[strlen(buf)-1] = '\0';

  sprintf(targString, "fdisk %d\n", req->fcol);
  sprintf(errString, "Invalid sparemap file:  can't find \"fdisk %d\" line\n",req->fcol);
  while (1) {
    rf_get_next_nonblank_line(buf,1024,fp,errString);
    if (!strncmp(buf,targString,strlen(targString))) break;
  }

  /* no more blank lines or comments allowed now */
  linecount = req->TablesPerSpareRegion * req->TableDepthInPUs;
  for (i=0; i<linecount; i++) {
    numFound = fscanf(fp," %d %d %d %d",&tableNum, &tupleNum, &spareDisk, &spareBlkOffset);
    if (numFound != 4) {
      fprintf(stderr,"Sparemap file prematurely exhausted after %d of %d lines\n",i,linecount); return(NULL);
    }
    RF_ASSERT(tableNum >= 0 && tableNum < req->TablesPerSpareRegion);
    RF_ASSERT(tupleNum >= 0 && tupleNum < req->BlocksPerTable);
    RF_ASSERT(spareDisk >= 0 && spareDisk < req->C);
    RF_ASSERT(spareBlkOffset >= 0 && spareBlkOffset < req->SpareSpaceDepthPerRegionInSUs / req->SUsPerPU);
    
    table[tableNum][tupleNum].spareDisk = spareDisk;
    table[tableNum][tupleNum].spareBlockOffsetInSUs = spareBlkOffset * req->SUsPerPU;
  }

  fclose(fp);
  return((void *) table);
}