1997-01-10 08:57:10 +03:00
|
|
|
/* $NetBSD: ncr_reg.h,v 1.10 1997/01/10 05:57:14 perry Exp $ */
|
1994-10-27 07:14:23 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/**************************************************************************
|
|
|
|
|
**
|
|
|
|
|
** Device driver for the NCR 53C810 PCI-SCSI-Controller.
|
|
|
|
|
**
|
|
|
|
|
** 386bsd / FreeBSD / NetBSD
|
|
|
|
|
**
|
|
|
|
|
**-------------------------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Written for 386bsd and FreeBSD by
|
1995-10-01 23:51:34 +03:00
|
|
|
** wolf@cologne.de Wolfgang Stanglmeier
|
1994-08-10 02:20:44 +04:00
|
|
|
** se@mi.Uni-Koeln.de Stefan Esser
|
|
|
|
|
**
|
|
|
|
|
** Ported to NetBSD by
|
|
|
|
|
** mycroft@gnu.ai.mit.edu
|
|
|
|
|
**
|
|
|
|
|
**-------------------------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved.
|
|
|
|
|
**
|
|
|
|
|
** Redistribution and use in source and binary forms, with or without
|
|
|
|
|
** modification, are permitted provided that the following conditions
|
|
|
|
|
** are met:
|
|
|
|
|
** 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
** notice, this list of conditions and the following disclaimer.
|
|
|
|
|
** 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
** notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
** documentation and/or other materials provided with the distribution.
|
|
|
|
|
** 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
** derived from this software without specific prior written permission.
|
|
|
|
|
**
|
|
|
|
|
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
**
|
1995-10-01 23:51:34 +03:00
|
|
|
***************************************************************************
|
1994-08-10 02:20:44 +04:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef __NCR_REG_H__
|
|
|
|
|
#define __NCR_REG_H__
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*==========================================================
|
|
|
|
|
**
|
|
|
|
|
** OS dependencies.
|
|
|
|
|
**
|
|
|
|
|
**==========================================================
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef __NetBSD__
|
|
|
|
|
#define INT8 int8_t
|
|
|
|
|
#define U_INT8 u_int8_t
|
|
|
|
|
#define INT16 int16_t
|
|
|
|
|
#define U_INT16 u_int16_t
|
|
|
|
|
#define INT32 int32_t
|
|
|
|
|
#define U_INT32 u_int32_t
|
|
|
|
|
#define TIMEOUT (void*)
|
|
|
|
|
#else /*__NetBSD__*/
|
|
|
|
|
#define INT8 char
|
|
|
|
|
#define U_INT8 u_char
|
|
|
|
|
#define INT16 short
|
|
|
|
|
#define U_INT16 u_short
|
|
|
|
|
#define INT32 int32
|
|
|
|
|
#define U_INT32 u_int32
|
|
|
|
|
#define TIMEOUT (timeout_func_t)
|
|
|
|
|
#endif /*__NetBSD__*/
|
|
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** The ncr 53c810 register structure.
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
struct ncr_reg {
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*00*/ U_INT8 nc_scntl0; /* full arb., ena parity, par->ATN */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*01*/ U_INT8 nc_scntl1; /* no reset */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define ISCON 0x10 /* connected to scsi */
|
|
|
|
|
#define CRST 0x08 /* force reset */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*02*/ U_INT8 nc_scntl2; /* no disconnect expected */
|
1994-10-01 09:27:56 +03:00
|
|
|
#define SDU 0x80 /* cmd: disconnect will raise error */
|
|
|
|
|
#define CHM 0x40 /* sta: chained mode */
|
|
|
|
|
#define WSS 0x08 /* sta: wide scsi send [W]*/
|
|
|
|
|
#define WSR 0x01 /* sta: wide scsi received [W]*/
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*03*/ U_INT8 nc_scntl3; /* cnf system clock dependent */
|
1994-10-01 09:27:56 +03:00
|
|
|
#define EWS 0x08 /* cmd: enable wide scsi [W]*/
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*04*/ U_INT8 nc_scid; /* cnf host adapter scsi address */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define RRE 0x40 /* r/w:e enable response to resel. */
|
|
|
|
|
#define SRE 0x20 /* r/w:e enable response to select */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*05*/ U_INT8 nc_sxfer; /* ### Sync speed and count */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*06*/ U_INT8 nc_sdid; /* ### Destination-ID */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*07*/ U_INT8 nc_gpreg; /* ??? IO-Pins */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*08*/ U_INT8 nc_sfbr; /* ### First byte in phase */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*09*/ U_INT8 nc_socl;
|
1994-08-10 02:20:44 +04:00
|
|
|
#define CREQ 0x80 /* r/w: SCSI-REQ */
|
|
|
|
|
#define CACK 0x40 /* r/w: SCSI-ACK */
|
|
|
|
|
#define CBSY 0x20 /* r/w: SCSI-BSY */
|
|
|
|
|
#define CSEL 0x10 /* r/w: SCSI-SEL */
|
|
|
|
|
#define CATN 0x08 /* r/w: SCSI-ATN */
|
|
|
|
|
#define CMSG 0x04 /* r/w: SCSI-MSG */
|
|
|
|
|
#define CC_D 0x02 /* r/w: SCSI-C_D */
|
|
|
|
|
#define CI_O 0x01 /* r/w: SCSI-I_O */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*0a*/ U_INT8 nc_ssid;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*0b*/ U_INT8 nc_sbcl;
|
1995-10-01 23:51:34 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*0c*/ U_INT8 nc_dstat;
|
1994-08-10 02:20:44 +04:00
|
|
|
#define DFE 0x80 /* sta: dma fifo empty */
|
|
|
|
|
#define MDPE 0x40 /* int: master data parity error */
|
|
|
|
|
#define BF 0x20 /* int: script: bus fault */
|
|
|
|
|
#define ABRT 0x10 /* int: script: command aborted */
|
|
|
|
|
#define SSI 0x08 /* int: script: single step */
|
|
|
|
|
#define SIR 0x04 /* int: script: interrupt instruct. */
|
|
|
|
|
#define IID 0x01 /* int: script: illegal instruct. */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*0d*/ U_INT8 nc_sstat0;
|
1994-10-01 09:27:56 +03:00
|
|
|
#define ILF 0x80 /* sta: data in SIDL register lsb */
|
|
|
|
|
#define ORF 0x40 /* sta: data in SODR register lsb */
|
|
|
|
|
#define OLF 0x20 /* sta: data in SODL register lsb */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define AIP 0x10 /* sta: arbitration in progress */
|
|
|
|
|
#define LOA 0x08 /* sta: arbitration lost */
|
|
|
|
|
#define WOA 0x04 /* sta: arbitration won */
|
|
|
|
|
#define IRST 0x02 /* sta: scsi reset signal */
|
|
|
|
|
#define SDP 0x01 /* sta: scsi parity signal */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*0e*/ U_INT8 nc_sstat1;
|
1994-10-01 09:27:56 +03:00
|
|
|
#define FF3210 0xf0 /* sta: bytes in the scsi fifo */
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*0f*/ U_INT8 nc_sstat2;
|
1994-10-01 09:27:56 +03:00
|
|
|
#define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
|
|
|
|
|
#define ORF1 0x40 /* sta: data in SODR register msb[W]*/
|
|
|
|
|
#define OLF1 0x20 /* sta: data in SODL register msb[W]*/
|
1995-10-01 23:51:34 +03:00
|
|
|
#define LDSC 0x02 /* sta: disconnect & reconnect */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*10*/ U_INT32 nc_dsa; /* --> Base page */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*14*/ U_INT8 nc_istat; /* --> Main Command and status */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define CABRT 0x80 /* cmd: abort current operation */
|
|
|
|
|
#define SRST 0x40 /* mod: reset chip */
|
|
|
|
|
#define SIGP 0x20 /* r/w: message from host to ncr */
|
|
|
|
|
#define SEM 0x10 /* r/w: message between host + ncr */
|
|
|
|
|
#define CON 0x08 /* sta: connected to scsi */
|
|
|
|
|
#define INTF 0x04 /* sta: int on the fly (reset by wr)*/
|
1995-10-01 23:51:34 +03:00
|
|
|
#define SIP 0x02 /* sta: scsi-interrupt */
|
|
|
|
|
#define DIP 0x01 /* sta: host/script interrupt */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*15*/ U_INT8 nc_15_;
|
|
|
|
|
/*16*/ U_INT8 nc_16_;
|
|
|
|
|
/*17*/ U_INT8 nc_17_;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*18*/ U_INT8 nc_ctest0;
|
|
|
|
|
/*19*/ U_INT8 nc_ctest1;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*1a*/ U_INT8 nc_ctest2;
|
1994-08-10 02:20:44 +04:00
|
|
|
#define CSIGP 0x40
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*1b*/ U_INT8 nc_ctest3;
|
1997-01-10 08:57:10 +03:00
|
|
|
#define FLF 0x08 /* cmd: flush dma fifo */
|
|
|
|
|
#define CLF 0x04 /* cmd: clear dma fifo */
|
|
|
|
|
#define FM 0x02 /* mod: fetch pin mode */
|
|
|
|
|
#define WRIE 0x01 /* mod: write and invalidate enable */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*1c*/ U_INT32 nc_temp; /* ### Temporary stack */
|
1995-10-01 23:51:34 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*20*/ U_INT8 nc_dfifo;
|
|
|
|
|
/*21*/ U_INT8 nc_ctest4;
|
1997-01-10 08:57:10 +03:00
|
|
|
#define BDIS 0x80 /* mod: burst disable */
|
|
|
|
|
#define MPEE 0x08 /* mod: master parity error enable */
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*22*/ U_INT8 nc_ctest5;
|
|
|
|
|
/*23*/ U_INT8 nc_ctest6;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*24*/ U_INT32 nc_dbc; /* ### Byte count and command */
|
|
|
|
|
/*28*/ U_INT32 nc_dnad; /* ### Next command register */
|
|
|
|
|
/*2c*/ U_INT32 nc_dsp; /* --> Script Pointer */
|
|
|
|
|
/*30*/ U_INT32 nc_dsps; /* --> Script pointer save/opcode#2 */
|
|
|
|
|
/*34*/ U_INT32 nc_scratcha; /* ??? Temporary register a */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*38*/ U_INT8 nc_dmode;
|
1997-01-10 08:57:10 +03:00
|
|
|
#define BL_2 0x80 /* mod: burst length shift value +2 */
|
|
|
|
|
#define BL_1 0x40 /* mod: burst length shift value +1 */
|
|
|
|
|
#define ERL 0x08 /* mod: enable read line */
|
|
|
|
|
#define ERMP 0x04 /* mod: enable read multiple */
|
|
|
|
|
#define BOF 0x02 /* mod: burst op code fetch */
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*39*/ U_INT8 nc_dien;
|
|
|
|
|
/*3a*/ U_INT8 nc_dwt;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*3b*/ U_INT8 nc_dcntl; /* --> Script execution control */
|
1997-01-10 08:57:10 +03:00
|
|
|
#define CLSE 0x80 /* mod: cache line size enable */
|
|
|
|
|
#define PFF 0x40 /* cmd: pre-fetch flush */
|
|
|
|
|
#define PFEN 0x20 /* mod: pre-fetch enable */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define SSM 0x10 /* mod: single step mode */
|
1997-01-10 08:57:10 +03:00
|
|
|
#define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define STD 0x04 /* cmd: start dma mode */
|
1997-01-10 08:57:10 +03:00
|
|
|
#define IRQD 0x02 /* mod: irq disable */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define NOCOM 0x01 /* cmd: protect sfbr while reselect */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*3c*/ U_INT32 nc_adder;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*40*/ U_INT16 nc_sien; /* -->: interrupt enable */
|
|
|
|
|
/*42*/ U_INT16 nc_sist; /* <--: interrupt status */
|
1994-08-10 02:20:44 +04:00
|
|
|
#define STO 0x0400/* sta: timeout (select) */
|
|
|
|
|
#define GEN 0x0200/* sta: timeout (general) */
|
|
|
|
|
#define HTH 0x0100/* sta: timeout (handshake) */
|
|
|
|
|
#define MA 0x80 /* sta: phase mismatch */
|
|
|
|
|
#define CMP 0x40 /* sta: arbitration complete */
|
|
|
|
|
#define SEL 0x20 /* sta: selected by another device */
|
|
|
|
|
#define RSL 0x10 /* sta: reselected by another device*/
|
|
|
|
|
#define SGE 0x08 /* sta: gross error (over/underflow)*/
|
|
|
|
|
#define UDC 0x04 /* sta: unexpected disconnect */
|
|
|
|
|
#define RST 0x02 /* sta: scsi bus reset detected */
|
|
|
|
|
#define PAR 0x01 /* sta: scsi parity error */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*44*/ U_INT8 nc_slpar;
|
|
|
|
|
/*45*/ U_INT8 nc_swide;
|
|
|
|
|
/*46*/ U_INT8 nc_macntl;
|
|
|
|
|
/*47*/ U_INT8 nc_gpcntl;
|
|
|
|
|
/*48*/ U_INT8 nc_stime0; /* cmd: timeout for select&handshake*/
|
|
|
|
|
/*49*/ U_INT8 nc_stime1; /* cmd: timeout user defined */
|
|
|
|
|
/*4a*/ U_INT16 nc_respid; /* sta: Reselect-IDs */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*4c*/ U_INT8 nc_stest0;
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*4d*/ U_INT8 nc_stest1;
|
1996-11-21 00:26:48 +03:00
|
|
|
#define DBLEN 0x08 /* clock doubler running */
|
|
|
|
|
#define DBLSEL 0x04 /* clock doubler selected */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*4e*/ U_INT8 nc_stest2;
|
1994-08-10 02:20:44 +04:00
|
|
|
#define ROF 0x40 /* reset scsi offset (after gross error!) */
|
|
|
|
|
#define EXT 0x02 /* extended filtering */
|
1994-10-01 09:27:56 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*4f*/ U_INT8 nc_stest3;
|
1994-08-10 02:20:44 +04:00
|
|
|
#define TE 0x80 /* c: tolerAnt enable */
|
|
|
|
|
#define CSF 0x02 /* c: clear scsi fifo */
|
1995-10-01 23:51:34 +03:00
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
/*50*/ U_INT16 nc_sidl; /* Lowlevel: latched from scsi data */
|
|
|
|
|
/*52*/ U_INT16 nc_52_;
|
|
|
|
|
/*54*/ U_INT16 nc_sodl; /* Lowlevel: data out to scsi data */
|
|
|
|
|
/*56*/ U_INT16 nc_56_;
|
|
|
|
|
/*58*/ U_INT16 nc_sbdl; /* Lowlevel: data from scsi data */
|
|
|
|
|
/*5a*/ U_INT16 nc_5a_;
|
|
|
|
|
/*5c*/ U_INT8 nc_scr0; /* Working register B */
|
|
|
|
|
/*5d*/ U_INT8 nc_scr1; /* */
|
|
|
|
|
/*5e*/ U_INT8 nc_scr2; /* */
|
|
|
|
|
/*5f*/ U_INT8 nc_scr3; /* */
|
1994-08-10 02:20:44 +04:00
|
|
|
/*60*/
|
|
|
|
|
};
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Utility macros for the script.
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
|
|
|
|
|
#define REG(r) REGJ (nc_, r)
|
|
|
|
|
|
|
|
|
|
#ifndef TARGET_MODE
|
|
|
|
|
#define TARGET_MODE 0
|
|
|
|
|
#endif
|
|
|
|
|
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
typedef U_INT32 ncrcmd;
|
1994-08-10 02:20:44 +04:00
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** SCSI phases
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_DATA_OUT 0x00000000
|
|
|
|
|
#define SCR_DATA_IN 0x01000000
|
|
|
|
|
#define SCR_COMMAND 0x02000000
|
|
|
|
|
#define SCR_STATUS 0x03000000
|
|
|
|
|
#define SCR_ILG_OUT 0x04000000
|
|
|
|
|
#define SCR_ILG_IN 0x05000000
|
|
|
|
|
#define SCR_MSG_OUT 0x06000000
|
|
|
|
|
#define SCR_MSG_IN 0x07000000
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Data transfer via SCSI.
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** MOVE_ABS (LEN)
|
|
|
|
|
** <<start address>>
|
|
|
|
|
**
|
|
|
|
|
** MOVE_IND (LEN)
|
|
|
|
|
** <<dnad_offset>>
|
|
|
|
|
**
|
|
|
|
|
** MOVE_TBL
|
|
|
|
|
** <<dnad_offset>>
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_MOVE_ABS(l) ((0x08000000 ^ (TARGET_MODE << 1ul)) | (l))
|
|
|
|
|
#define SCR_MOVE_IND(l) ((0x28000000 ^ (TARGET_MODE << 1ul)) | (l))
|
|
|
|
|
#define SCR_MOVE_TBL (0x18000000 ^ (TARGET_MODE << 1ul))
|
|
|
|
|
|
|
|
|
|
struct scr_tblmove {
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
U_INT32 size;
|
|
|
|
|
U_INT32 addr;
|
1994-08-10 02:20:44 +04:00
|
|
|
};
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Selection
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** SEL_ABS | SCR_ID (0..7) [ | REL_JMP]
|
|
|
|
|
** <<alternate_address>>
|
|
|
|
|
**
|
|
|
|
|
** SEL_TBL | << dnad_offset>> [ | REL_JMP]
|
|
|
|
|
** <<alternate_address>>
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_SEL_ABS 0x40000000
|
|
|
|
|
#define SCR_SEL_ABS_ATN 0x41000000
|
|
|
|
|
#define SCR_SEL_TBL 0x42000000
|
|
|
|
|
#define SCR_SEL_TBL_ATN 0x43000000
|
|
|
|
|
|
|
|
|
|
struct scr_tblsel {
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
U_INT8 sel_0;
|
|
|
|
|
U_INT8 sel_sxfer;
|
|
|
|
|
U_INT8 sel_id;
|
|
|
|
|
U_INT8 sel_scntl3;
|
1994-08-10 02:20:44 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define SCR_JMP_REL 0x04000000
|
Move INT32, U_INT32, TIMEOUT definitions to ncr_reg.h, and add definitions
for U_INT8, INT16, U_INT16 definitions. Convert structs and
definitions in ncr_reg.h (e.g. ncrcmd, the chip register layout, etc.)
to use these definitions.
Add INB_OFF, INL_OFF, and OUTL_OFF macros to access specified offsets into
I/O or memory space. Convert register dumps (etc.), and cache snoop
test to use these new macros, so that nothing accesses the device
I/O or memory space directly. (Register dumps now come from I/O space
if NCR_IOMAPPED. They used to bogusly use memory space.)
Add a new relocation type for script entries, RELOC_KVAR. Allow scripts
access to mono_time.tv_sec, mono_time, and ncr_cache via this
mechanism, and convert scripts to use it. An ncrcmd is only 32 bits
wide, and KVAs may be > 32 bits wide (e.g. on Alpha), leading to
linker problems. This is a safer way to do this anyway; relocation is
more deterministic this way, and doesn't rely on KVAs not looking like
other relocation types.
Panic if an unmatched relocation other than 'zero' is specified. That's
now a script bug. (This used to be used to convert KVAs of kernel
variables referenced in the script to PCI bus physical addresses,
and that is now handled by RELOC_KVAR relocations.)
Figure out and print the model of chip.
1996-03-11 19:13:57 +03:00
|
|
|
#define SCR_ID(id) (((U_INT32)(id)) << 16)
|
1994-08-10 02:20:44 +04:00
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Waiting for Disconnect or Reselect
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** WAIT_DISC
|
|
|
|
|
** dummy: <<alternate_address>>
|
|
|
|
|
**
|
|
|
|
|
** WAIT_RESEL
|
|
|
|
|
** <<alternate_address>>
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_WAIT_DISC 0x48000000
|
|
|
|
|
#define SCR_WAIT_RESEL 0x50000000
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Bit Set / Reset
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** SET (flags {|.. })
|
|
|
|
|
**
|
|
|
|
|
** CLR (flags {|.. })
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_SET(f) (0x58000000 | (f))
|
|
|
|
|
#define SCR_CLR(f) (0x60000000 | (f))
|
|
|
|
|
|
|
|
|
|
#define SCR_CARRY 0x00000400
|
|
|
|
|
#define SCR_TRG 0x00000200
|
|
|
|
|
#define SCR_ACK 0x00000040
|
|
|
|
|
#define SCR_ATN 0x00000008
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Memory to memory move
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** COPY (bytecount)
|
|
|
|
|
** << source_address >>
|
|
|
|
|
** << destination_address >>
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_COPY(n) (0xc0000000 | (n))
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Register move and binary operations
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** SFBR_REG (reg, op, data) reg = SFBR op data
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
** REG_SFBR (reg, op, data) SFBR = reg op data
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
** REG_REG (reg, op, data) reg = reg op data
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
1994-10-01 09:27:56 +03:00
|
|
|
#define SCR_REG_OFS(ofs) ((ofs) << 16ul)
|
|
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
#define SCR_SFBR_REG(reg,op,data) \
|
1994-10-01 09:27:56 +03:00
|
|
|
(0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
|
1994-08-10 02:20:44 +04:00
|
|
|
|
|
|
|
|
#define SCR_REG_SFBR(reg,op,data) \
|
1994-10-01 09:27:56 +03:00
|
|
|
(0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
|
1994-08-10 02:20:44 +04:00
|
|
|
|
|
|
|
|
#define SCR_REG_REG(reg,op,data) \
|
1994-10-01 09:27:56 +03:00
|
|
|
(0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
|
|
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
|
|
|
|
|
#define SCR_LOAD 0x00000000
|
|
|
|
|
#define SCR_SHL 0x01000000
|
|
|
|
|
#define SCR_OR 0x02000000
|
|
|
|
|
#define SCR_XOR 0x03000000
|
|
|
|
|
#define SCR_AND 0x04000000
|
|
|
|
|
#define SCR_SHR 0x05000000
|
|
|
|
|
#define SCR_ADD 0x06000000
|
|
|
|
|
#define SCR_ADDC 0x07000000
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** FROM_REG (reg) reg = SFBR
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
** TO_REG (reg) SFBR = reg
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
** LOAD_REG (reg, data) reg = <data>
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
** LOAD_SFBR(data) SFBR = <data>
|
|
|
|
|
** << 0 >>
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_FROM_REG(reg) \
|
|
|
|
|
SCR_REG_SFBR(reg,SCR_OR,0)
|
|
|
|
|
|
|
|
|
|
#define SCR_TO_REG(reg) \
|
|
|
|
|
SCR_SFBR_REG(reg,SCR_OR,0)
|
|
|
|
|
|
|
|
|
|
#define SCR_LOAD_REG(reg,data) \
|
|
|
|
|
SCR_REG_REG(reg,SCR_LOAD,data)
|
|
|
|
|
|
|
|
|
|
#define SCR_LOAD_SFBR(data) \
|
|
|
|
|
(SCR_REG_SFBR (gpreg, SCR_LOAD, data))
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** Waiting for Disconnect or Reselect
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<address>>
|
|
|
|
|
**
|
|
|
|
|
** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<distance>>
|
|
|
|
|
**
|
|
|
|
|
** CALL [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<address>>
|
|
|
|
|
**
|
|
|
|
|
** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<distance>>
|
|
|
|
|
**
|
|
|
|
|
** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<dummy>>
|
|
|
|
|
**
|
|
|
|
|
** INT [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<ident>>
|
|
|
|
|
**
|
|
|
|
|
** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
|
|
|
|
|
** <<ident>>
|
|
|
|
|
**
|
|
|
|
|
** Conditions:
|
|
|
|
|
** WHEN (phase)
|
|
|
|
|
** IF (phase)
|
|
|
|
|
** CARRY
|
|
|
|
|
** DATA (data, mask)
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SCR_JUMP 0x80080000
|
|
|
|
|
#define SCR_JUMPR 0x80880000
|
|
|
|
|
#define SCR_CALL 0x88080000
|
|
|
|
|
#define SCR_CALLR 0x88880000
|
|
|
|
|
#define SCR_RETURN 0x90080000
|
|
|
|
|
#define SCR_INT 0x98080000
|
|
|
|
|
#define SCR_INT_FLY 0x98180000
|
|
|
|
|
|
|
|
|
|
#define IFFALSE(arg) (0x00080000 | (arg))
|
|
|
|
|
#define IFTRUE(arg) (0x00000000 | (arg))
|
|
|
|
|
|
|
|
|
|
#define WHEN(phase) (0x00030000 | (phase))
|
|
|
|
|
#define IF(phase) (0x00020000 | (phase))
|
|
|
|
|
|
|
|
|
|
#define DATA(D) (0x00040000 | ((D) & 0xff))
|
|
|
|
|
#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
|
|
|
|
|
|
|
|
|
|
#define CARRYSET (0x00200000)
|
1995-10-01 23:51:34 +03:00
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*-----------------------------------------------------------
|
|
|
|
|
**
|
|
|
|
|
** SCSI constants.
|
|
|
|
|
**
|
|
|
|
|
**-----------------------------------------------------------
|
|
|
|
|
*/
|
|
|
|
|
|
1995-11-30 03:56:23 +03:00
|
|
|
/*
|
|
|
|
|
** Messages
|
|
|
|
|
*/
|
|
|
|
|
#ifdef __NetBSD__
|
|
|
|
|
#include <scsi/scsi_message.h>
|
|
|
|
|
|
|
|
|
|
#define M_COMPLETE MSG_CMDCOMPLETE
|
|
|
|
|
#define M_EXTENDED MSG_EXTENDED
|
|
|
|
|
#define M_SAVE_DP MSG_SAVEDATAPOINTER
|
|
|
|
|
#define M_RESTORE_DP MSG_RESTOREPOINTERS
|
|
|
|
|
#define M_DISCONNECT MSG_DISCONNECT
|
|
|
|
|
#define M_ID_ERROR MSG_INITIATOR_DET_ERR
|
|
|
|
|
#define M_ABORT MSG_ABORT
|
|
|
|
|
#define M_REJECT MSG_MESSAGE_REJECT
|
|
|
|
|
#define M_NOOP MSG_NOOP
|
|
|
|
|
#define M_PARITY MSG_PARITY_ERROR
|
|
|
|
|
#define M_LCOMPLETE MSG_LINK_CMD_COMPLETE
|
|
|
|
|
#define M_FCOMPLETE MSG_LINK_CMD_COMPLETEF
|
|
|
|
|
#define M_RESET MSG_BUS_DEV_RESET
|
|
|
|
|
#define M_ABORT_TAG MSG_ABORT_TAG
|
|
|
|
|
#define M_CLEAR_QUEUE MSG_CLEAR_QUEUE
|
|
|
|
|
#define M_INIT_REC MSG_INIT_RECOVERY
|
|
|
|
|
#define M_REL_REC MSG_REL_RECOVERY
|
|
|
|
|
#define M_TERMINATE MSG_TERM_IO_PROC
|
|
|
|
|
#define M_SIMPLE_TAG MSG_SIMPLE_Q_TAG
|
|
|
|
|
#define M_HEAD_TAG MSG_HEAD_OF_Q_TAG
|
|
|
|
|
#define M_ORDERED_TAG MSG_ORDERED_Q_TAG
|
|
|
|
|
#define M_IGN_RESIDUE MSG_IGN_WIDE_RESIDUE
|
|
|
|
|
#define M_IDENTIFY MSG_IDENTIFY(0, 0)
|
|
|
|
|
|
|
|
|
|
/* #define M_X_MODIFY_DP (0x00) */ /* XXX what is this? */
|
|
|
|
|
#define M_X_SYNC_REQ MSG_EXT_SDTR
|
|
|
|
|
#define M_X_WIDE_REQ MSG_EXT_WDTR
|
|
|
|
|
#else
|
|
|
|
|
#define M_COMPLETE (0x00)
|
|
|
|
|
#define M_EXTENDED (0x01)
|
|
|
|
|
#define M_SAVE_DP (0x02)
|
|
|
|
|
#define M_RESTORE_DP (0x03)
|
|
|
|
|
#define M_DISCONNECT (0x04)
|
|
|
|
|
#define M_ID_ERROR (0x05)
|
|
|
|
|
#define M_ABORT (0x06)
|
|
|
|
|
#define M_REJECT (0x07)
|
|
|
|
|
#define M_NOOP (0x08)
|
|
|
|
|
#define M_PARITY (0x09)
|
|
|
|
|
#define M_LCOMPLETE (0x0a)
|
|
|
|
|
#define M_FCOMPLETE (0x0b)
|
|
|
|
|
#define M_RESET (0x0c)
|
|
|
|
|
#define M_ABORT_TAG (0x0d)
|
|
|
|
|
#define M_CLEAR_QUEUE (0x0e)
|
|
|
|
|
#define M_INIT_REC (0x0f)
|
|
|
|
|
#define M_REL_REC (0x10)
|
|
|
|
|
#define M_TERMINATE (0x11)
|
|
|
|
|
#define M_SIMPLE_TAG (0x20)
|
|
|
|
|
#define M_HEAD_TAG (0x21)
|
|
|
|
|
#define M_ORDERED_TAG (0x22)
|
|
|
|
|
#define M_IGN_RESIDUE (0x23)
|
|
|
|
|
#define M_IDENTIFY (0x80)
|
|
|
|
|
|
|
|
|
|
#define M_X_MODIFY_DP (0x00)
|
|
|
|
|
#define M_X_SYNC_REQ (0x01)
|
|
|
|
|
#define M_X_WIDE_REQ (0x03)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
1994-08-10 02:20:44 +04:00
|
|
|
/*
|
|
|
|
|
** Status
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define S_GOOD (0x00)
|
|
|
|
|
#define S_CHECK_COND (0x02)
|
|
|
|
|
#define S_COND_MET (0x04)
|
|
|
|
|
#define S_BUSY (0x08)
|
|
|
|
|
#define S_INT (0x10)
|
|
|
|
|
#define S_INT_COND_MET (0x14)
|
|
|
|
|
#define S_CONFLICT (0x18)
|
|
|
|
|
#define S_TERMINATED (0x20)
|
|
|
|
|
#define S_QUEUE_FULL (0x28)
|
|
|
|
|
#define S_ILLEGAL (0xff)
|
1994-10-01 09:27:56 +03:00
|
|
|
#define S_SENSE (0x80)
|
1994-08-10 02:20:44 +04:00
|
|
|
|
|
|
|
|
#endif /*__NCR_REG_H__*/
|